diff --git a/configs/flp.conf b/configs/flp.conf
deleted file mode 100644
index ecb98a9..0000000
--- a/configs/flp.conf
+++ /dev/null
@@ -1,21 +0,0 @@
-################################
-#####     FLP settings     #####
-################################
-
-# For default batch size, set the following
-BATCH_SIZE=100
-
-# FLP Capabilities bit mask
-# GEOFENCE = 0x01
-# BATCHING = 0x02
-# default = GEOFENCE | BATCHING
-CAPABILITIES=0x03
-
-# FLP accuracy
-# Low accuracy = 0
-# Medium accuracy = 1
-# High accuracy = 2
-ACCURACY=1
-
-# FLP geofence responsiveness
-GEOFENCE_RESPONSIVENESS = 0
diff --git a/configs/gps.conf b/configs/gps.conf
deleted file mode 100644
index af8ebcd..0000000
--- a/configs/gps.conf
+++ /dev/null
@@ -1,91 +0,0 @@
-#Uncommenting these urls would only enable
-#the power up auto injection and force injection(test case).
-XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
-XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
-XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
-
-# Error Estimate
-# _SET = 1
-# _CLEAR = 0
-ERR_ESTIMATE=0
-
-#Test
-NTP_SERVER=time.gpsonextra.net
-#Asia
-# NTP_SERVER=asia.pool.ntp.org
-#Europe
-# NTP_SERVER=europe.pool.ntp.org
-#North America
-# NTP_SERVER=north-america.pool.ntp.org
-
-# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
-#               4 - Debug, 5 - Verbose
-# If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 2
-
-# Intermediate position report, 1=enable, 0=disable
-INTERMEDIATE_POS=0
-
-# supl version 1.0
-SUPL_VER=0x10000
-
-# Emergency SUPL, 1=enable, 0=disable
-SUPL_ES=1
-
-# GPS Capabilities bit mask
-# SCHEDULING = 0x01
-# MSB = 0x02
-# MSA = 0x04
-# ON_DEMAND_TIME = 0x10
-# GEOFENCE = 0x20
-# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
-CAPABILITIES=0x37
-
-# Accuracy threshold for intermediate positions
-# less accurate positions are ignored, 0 for passing all positions
-# ACCURACY_THRES=5000
-
-################################
-##### AGPS server settings #####
-################################
-
-# FOR SUPL SUPPORT, set the following
-# SUPL_HOST=supl.host.com or IP
-# SUPL_PORT=1234
-
-# FOR C2K PDE SUPPORT, set the following
-# C2K_HOST=c2k.pde.com or IP
-# C2K_PORT=1234
-
-####################################
-#  LTE Positioning Profile Settings
-####################################
-# 0: Enable RRLP on LTE(Default)
-# 1: Enable LPP_User_Plane on LTE
-# 2: Enable LPP_Control_Plane
-# 3: Enable both LPP_User_Plane and LPP_Control_Plane
-LPP_PROFILE = 0 # Sensor R&D : This will not be injected to MODEM
-
-################################
-# EXTRA SETTINGS
-################################
-# NMEA provider (1=Modem Processor, 0=Application Processor)
-NMEA_PROVIDER=1
-
-# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
-SGLTE_TARGET=0
-
-##################################################
-# Select Positioning Protocol on A-GLONASS system
-##################################################
-# 0x1: RRC CPlane
-# 0x2: RRLP UPlane
-# 0x4: LLP Uplane
-A_GLONASS_POS_PROTOCOL_SELECT = 0x0
-
-##################################################
-# Delete only Ephemeris files
-##################################################
-#0 : off - default
-#1 : on - Erase only eph files when we use 'delete aiding data' function.
-DEL_EPH_ONLY = 0
diff --git a/configs/sap.conf b/configs/sap.conf
deleted file mode 100644
index 6ef6a09..0000000
--- a/configs/sap.conf
+++ /dev/null
@@ -1,42 +0,0 @@
-################################
-# Sensor Settings
-################################
-
-# Needs to be set explicitly based on sensor
-# There is no default value.
-# used in loc_eng_reinit
-#GYRO_BIAS_RANDOM_WALK=
-#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY=
-#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY=
-#RATE_RANDOM_WALK_SPECTRAL_DENSITY=
-#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY=
-
-# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
-# used in loc_eng_reinit
-SENSOR_ACCEL_BATCHES_PER_SEC=3
-SENSOR_ACCEL_SAMPLES_PER_BATCH=5
-SENSOR_GYRO_BATCHES_PER_SEC=3
-SENSOR_GYRO_SAMPLES_PER_BATCH=5
-# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
-SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
-SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
-SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
-SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
-
-# Sensor Control Mode (0=AUTO, 1=FORCE_ON)
-# used in loc_eng_reinit
-SENSOR_CONTROL_MODE=0
-
-# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)
-# used in loc_eng_reinit
-SENSOR_USAGE=0
-
-# Choose GSIFF sensor provider (1=Snapdragon Sensors Core, 2=Android NDK)
-SENSOR_PROVIDER=2
-
-# Bit mask used to define which sensor algorithms are used.
-# Setting each bit has the following definition:
-#  0x1 - DISABLE_INS_POSITIONING_FILTER
-#  0x0 - ENABLE_INS_POSITIONING_FILTER
-SENSOR_ALGORITHM_CONFIG_MASK=0x1
-