mirror of
https://github.com/followmsi/android_kernel_google_msm.git
synced 2024-11-06 23:17:41 +00:00
mx5: add cpuimx51sd module and its baseboard
Signed-off-by: Eric Bénard <eric@eukrea.com>
This commit is contained in:
Eric Bénard
Sascha Hauer
parent
b545d9ed1b
commit
70b1726820
6 changed files with 531 additions and 1 deletions
|
|
@ -49,6 +49,31 @@ config MACH_EUKREA_MBIMX51_BASEBOARD
|
|||
|
||||
endchoice
|
||||
|
||||
config MACH_EUKREA_CPUIMX51SD
|
||||
bool "Support Eukrea CPUIMX51SD module"
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
help
|
||||
Include support for Eukrea CPUIMX51SD platform. This includes
|
||||
specific configurations for the module and its peripherals.
|
||||
|
||||
choice
|
||||
prompt "Baseboard"
|
||||
depends on MACH_EUKREA_CPUIMX51SD
|
||||
default MACH_EUKREA_MBIMXSD51_BASEBOARD
|
||||
|
||||
config MACH_EUKREA_MBIMXSD51_BASEBOARD
|
||||
prompt "Eukrea MBIMXSD development board"
|
||||
bool
|
||||
select IMX_HAVE_PLATFORM_ESDHC
|
||||
help
|
||||
This adds board specific devices that can be found on Eukrea's
|
||||
MBIMXSD evaluation board.
|
||||
|
||||
endchoice
|
||||
|
||||
config MACH_MX51_EFIKAMX
|
||||
bool "Support MX51 Genesi Efika MX nettop"
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
|
|
|
|||
|
|
@ -9,4 +9,6 @@ obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
|
|||
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
|
||||
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
|
||||
obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
|
||||
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
|
||||
obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
|
||||
obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
|
||||
|
|
|
|||
333
arch/arm/mach-mx5/board-cpuimx51sd.c
Normal file
333
arch/arm/mach-mx5/board-cpuimx51sd.c
Normal file
|
|
@ -0,0 +1,333 @@
|
|||
/*
|
||||
*
|
||||
* Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
|
||||
*
|
||||
* based on board-mx51_babbage.c which is
|
||||
* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||
* Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c/tsc2007.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/fsl_devices.h>
|
||||
#include <linux/i2c-gpio.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/can/platform/mcp251x.h>
|
||||
|
||||
#include <mach/eukrea-baseboards.h>
|
||||
#include <mach/common.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/iomux-mx51.h>
|
||||
#include <mach/mxc_ehci.h>
|
||||
|
||||
#include <asm/irq.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
|
||||
#include "devices-imx51.h"
|
||||
#include "devices.h"
|
||||
|
||||
#define USBH1_RST (1*32 + 28)
|
||||
#define ETH_RST (1*32 + 31)
|
||||
#define TSC2007_IRQGPIO (2*32 + 12)
|
||||
#define CAN_IRQGPIO (0*32 + 1)
|
||||
#define CAN_RST (3*32 + 15)
|
||||
#define CAN_NCS (3*32 + 24)
|
||||
#define CAN_RXOBF (0*32 + 4)
|
||||
#define CAN_RX1BF (0*32 + 6)
|
||||
#define CAN_TXORTS (0*32 + 7)
|
||||
#define CAN_TX1RTS (0*32 + 8)
|
||||
#define CAN_TX2RTS (0*32 + 9)
|
||||
#define I2C_SCL (3*32 + 16)
|
||||
#define I2C_SDA (3*32 + 17)
|
||||
|
||||
/* USB_CTRL_1 */
|
||||
#define MX51_USB_CTRL_1_OFFSET 0x10
|
||||
#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
|
||||
|
||||
#define MX51_USB_PLLDIV_12_MHZ 0x00
|
||||
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
|
||||
#define MX51_USB_PLL_DIV_24_MHZ 0x02
|
||||
|
||||
#define CPUIMX51SD_GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, \
|
||||
MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
|
||||
|
||||
static struct pad_desc eukrea_cpuimx51sd_pads[] = {
|
||||
/* UART1 */
|
||||
MX51_PAD_UART1_RXD__UART1_RXD,
|
||||
MX51_PAD_UART1_TXD__UART1_TXD,
|
||||
MX51_PAD_UART1_RTS__UART1_RTS,
|
||||
MX51_PAD_UART1_CTS__UART1_CTS,
|
||||
|
||||
/* USB HOST1 */
|
||||
MX51_PAD_USBH1_CLK__USBH1_CLK,
|
||||
MX51_PAD_USBH1_DIR__USBH1_DIR,
|
||||
MX51_PAD_USBH1_NXT__USBH1_NXT,
|
||||
MX51_PAD_USBH1_DATA0__USBH1_DATA0,
|
||||
MX51_PAD_USBH1_DATA1__USBH1_DATA1,
|
||||
MX51_PAD_USBH1_DATA2__USBH1_DATA2,
|
||||
MX51_PAD_USBH1_DATA3__USBH1_DATA3,
|
||||
MX51_PAD_USBH1_DATA4__USBH1_DATA4,
|
||||
MX51_PAD_USBH1_DATA5__USBH1_DATA5,
|
||||
MX51_PAD_USBH1_DATA6__USBH1_DATA6,
|
||||
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
|
||||
MX51_PAD_USBH1_STP__USBH1_STP,
|
||||
MX51_PAD_EIM_CS3__GPIO_2_28, /* PHY nRESET */
|
||||
|
||||
/* FEC */
|
||||
MX51_PAD_EIM_DTACK__GPIO_2_31, /* PHY nRESET */
|
||||
|
||||
/* HSI2C */
|
||||
MX51_PAD_I2C1_CLK__GPIO_4_16,
|
||||
MX51_PAD_I2C1_DAT__GPIO_4_17,
|
||||
|
||||
/* CAN */
|
||||
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
|
||||
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
|
||||
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
|
||||
MX51_PAD_CSPI1_SS0__GPIO_4_24, /* nCS */
|
||||
MX51_PAD_CSI2_PIXCLK__GPIO_4_15, /* nReset */
|
||||
MX51_PAD_GPIO_1_1__GPIO_1_1, /* IRQ */
|
||||
MX51_PAD_GPIO_1_4__GPIO_1_4, /* Control signals */
|
||||
MX51_PAD_GPIO_1_6__GPIO_1_6,
|
||||
MX51_PAD_GPIO_1_7__GPIO_1_7,
|
||||
MX51_PAD_GPIO_1_8__GPIO_1_8,
|
||||
MX51_PAD_GPIO_1_9__GPIO_1_9,
|
||||
|
||||
/* Touchscreen */
|
||||
CPUIMX51SD_GPIO_3_12, /* IRQ */
|
||||
};
|
||||
|
||||
static const struct imxuart_platform_data uart_pdata __initconst = {
|
||||
.flags = IMXUART_HAVE_RTSCTS,
|
||||
};
|
||||
|
||||
static int ts_get_pendown_state(void)
|
||||
{
|
||||
return gpio_get_value(TSC2007_IRQGPIO) ? 0 : 1;
|
||||
}
|
||||
|
||||
static struct tsc2007_platform_data tsc2007_info = {
|
||||
.model = 2007,
|
||||
.x_plate_ohms = 180,
|
||||
.get_pendown_state = ts_get_pendown_state,
|
||||
};
|
||||
|
||||
static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("pcf8563", 0x51),
|
||||
}, {
|
||||
I2C_BOARD_INFO("tsc2007", 0x49),
|
||||
.type = "tsc2007",
|
||||
.platform_data = &tsc2007_info,
|
||||
.irq = gpio_to_irq(TSC2007_IRQGPIO),
|
||||
},
|
||||
};
|
||||
|
||||
static const struct mxc_nand_platform_data
|
||||
eukrea_cpuimx51sd_nand_board_info __initconst = {
|
||||
.width = 1,
|
||||
.hw_ecc = 1,
|
||||
.flash_bbt = 1,
|
||||
};
|
||||
|
||||
/* This function is board specific as the bit mask for the plldiv will also
|
||||
be different for other Freescale SoCs, thus a common bitmask is not
|
||||
possible and cannot get place in /plat-mxc/ehci.c.*/
|
||||
static int initialize_otg_port(struct platform_device *pdev)
|
||||
{
|
||||
u32 v;
|
||||
void __iomem *usb_base;
|
||||
void __iomem *usbother_base;
|
||||
|
||||
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
|
||||
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
|
||||
|
||||
/* Set the PHY clock to 19.2MHz */
|
||||
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
|
||||
v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
|
||||
v |= MX51_USB_PLL_DIV_19_2_MHZ;
|
||||
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
|
||||
iounmap(usb_base);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int initialize_usbh1_port(struct platform_device *pdev)
|
||||
{
|
||||
u32 v;
|
||||
void __iomem *usb_base;
|
||||
void __iomem *usbother_base;
|
||||
|
||||
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
|
||||
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
|
||||
|
||||
/* The clock for the USBH1 ULPI port will come from the PHY. */
|
||||
v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
|
||||
__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
|
||||
usbother_base + MX51_USB_CTRL_1_OFFSET);
|
||||
iounmap(usb_base);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct mxc_usbh_platform_data dr_utmi_config = {
|
||||
.init = initialize_otg_port,
|
||||
.portsc = MXC_EHCI_UTMI_16BIT,
|
||||
.flags = MXC_EHCI_INTERNAL_PHY,
|
||||
};
|
||||
|
||||
static struct fsl_usb2_platform_data usb_pdata = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
|
||||
};
|
||||
|
||||
static struct mxc_usbh_platform_data usbh1_config = {
|
||||
.init = initialize_usbh1_port,
|
||||
.portsc = MXC_EHCI_MODE_ULPI,
|
||||
.flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
|
||||
};
|
||||
|
||||
static int otg_mode_host;
|
||||
|
||||
static int __init eukrea_cpuimx51sd_otg_mode(char *options)
|
||||
{
|
||||
if (!strcmp(options, "host"))
|
||||
otg_mode_host = 1;
|
||||
else if (!strcmp(options, "device"))
|
||||
otg_mode_host = 0;
|
||||
else
|
||||
pr_info("otg_mode neither \"host\" nor \"device\". "
|
||||
"Defaulting to device\n");
|
||||
return 0;
|
||||
}
|
||||
__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
|
||||
|
||||
static struct i2c_gpio_platform_data pdata = {
|
||||
.sda_pin = I2C_SDA,
|
||||
.sda_is_open_drain = 0,
|
||||
.scl_pin = I2C_SCL,
|
||||
.scl_is_open_drain = 0,
|
||||
.udelay = 2,
|
||||
};
|
||||
|
||||
static struct platform_device hsi2c_gpio_device = {
|
||||
.name = "i2c-gpio",
|
||||
.id = 0,
|
||||
.dev.platform_data = &pdata,
|
||||
};
|
||||
|
||||
static struct mcp251x_platform_data mcp251x_info = {
|
||||
.oscillator_frequency = 24E6,
|
||||
};
|
||||
|
||||
static struct spi_board_info cpuimx51sd_spi_device[] = {
|
||||
{
|
||||
.modalias = "mcp2515",
|
||||
.max_speed_hz = 6500000,
|
||||
.bus_num = 0,
|
||||
.mode = SPI_MODE_0,
|
||||
.chip_select = 0,
|
||||
.platform_data = &mcp251x_info,
|
||||
.irq = gpio_to_irq(0 * 32 + 1)
|
||||
},
|
||||
};
|
||||
|
||||
static int cpuimx51sd_spi1_cs[] = {
|
||||
CAN_NCS,
|
||||
};
|
||||
|
||||
static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
|
||||
.chipselect = cpuimx51sd_spi1_cs,
|
||||
.num_chipselect = ARRAY_SIZE(cpuimx51sd_spi1_cs),
|
||||
};
|
||||
|
||||
static struct platform_device *platform_devices[] __initdata = {
|
||||
&hsi2c_gpio_device,
|
||||
};
|
||||
|
||||
static void __init eukrea_cpuimx51sd_init(void)
|
||||
{
|
||||
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
|
||||
ARRAY_SIZE(eukrea_cpuimx51sd_pads));
|
||||
|
||||
imx51_add_imx_uart(0, &uart_pdata);
|
||||
imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
|
||||
|
||||
gpio_request(ETH_RST, "eth_rst");
|
||||
gpio_set_value(ETH_RST, 1);
|
||||
imx51_add_fec(NULL);
|
||||
|
||||
gpio_request(CAN_IRQGPIO, "can_irq");
|
||||
gpio_direction_input(CAN_IRQGPIO);
|
||||
gpio_free(CAN_IRQGPIO);
|
||||
gpio_request(CAN_NCS, "can_ncs");
|
||||
gpio_direction_output(CAN_NCS, 1);
|
||||
gpio_free(CAN_NCS);
|
||||
gpio_request(CAN_RST, "can_rst");
|
||||
gpio_direction_output(CAN_RST, 0);
|
||||
msleep(20);
|
||||
gpio_set_value(CAN_RST, 1);
|
||||
imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
|
||||
spi_register_board_info(cpuimx51sd_spi_device,
|
||||
ARRAY_SIZE(cpuimx51sd_spi_device));
|
||||
|
||||
gpio_request(TSC2007_IRQGPIO, "tsc2007_irq");
|
||||
gpio_direction_input(TSC2007_IRQGPIO);
|
||||
gpio_free(TSC2007_IRQGPIO);
|
||||
|
||||
i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
|
||||
ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
|
||||
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
||||
|
||||
if (otg_mode_host)
|
||||
mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
|
||||
else {
|
||||
initialize_otg_port(NULL);
|
||||
mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
|
||||
}
|
||||
|
||||
gpio_request(USBH1_RST, "usb_rst");
|
||||
gpio_direction_output(USBH1_RST, 0);
|
||||
msleep(20);
|
||||
gpio_set_value(USBH1_RST, 1);
|
||||
mxc_register_device(&mxc_usbh1_device, &usbh1_config);
|
||||
|
||||
#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
|
||||
eukrea_mbimxsd51_baseboard_init();
|
||||
#endif
|
||||
}
|
||||
|
||||
static void __init eukrea_cpuimx51sd_timer_init(void)
|
||||
{
|
||||
mx51_clocks_init(32768, 24000000, 22579200, 0);
|
||||
}
|
||||
|
||||
static struct sys_timer mxc_timer = {
|
||||
.init = eukrea_cpuimx51sd_timer_init,
|
||||
};
|
||||
|
||||
MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
|
||||
/* Maintainer: Eric Bénard <eric@eukrea.com> */
|
||||
.phys_io = MX51_AIPS1_BASE_ADDR,
|
||||
.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
|
||||
.boot_params = PHYS_OFFSET + 0x100,
|
||||
.map_io = mx51_map_io,
|
||||
.init_irq = mx51_init_irq,
|
||||
.init_machine = eukrea_cpuimx51sd_init,
|
||||
.timer = &mxc_timer,
|
||||
MACHINE_END
|
||||
166
arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
Normal file
166
arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
Normal file
|
|
@ -0,0 +1,166 @@
|
|||
/*
|
||||
* Copyright (C) 2010 Eric Benard - eric@eukrea.com
|
||||
*
|
||||
* Based on pcm970-baseboard.c which is :
|
||||
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301, USA.
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/i2c.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/common.h>
|
||||
#include <mach/imx-uart.h>
|
||||
#include <mach/iomux-mx51.h>
|
||||
#include <mach/audmux.h>
|
||||
|
||||
#include "devices-imx51.h"
|
||||
#include "devices.h"
|
||||
|
||||
#define MBIMXSD_GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, \
|
||||
MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
|
||||
|
||||
static struct pad_desc eukrea_mbimxsd_pads[] = {
|
||||
/* LED */
|
||||
MX51_PAD_NANDF_D10__GPIO_3_30,
|
||||
/* SWITCH */
|
||||
MBIMXSD_GPIO_3_31,
|
||||
/* UART2 */
|
||||
MX51_PAD_UART2_RXD__UART2_RXD,
|
||||
MX51_PAD_UART2_TXD__UART2_TXD,
|
||||
/* UART 3 */
|
||||
MX51_PAD_UART3_RXD__UART3_RXD,
|
||||
MX51_PAD_UART3_TXD__UART3_TXD,
|
||||
MX51_PAD_KEY_COL4__UART3_RTS,
|
||||
MX51_PAD_KEY_COL5__UART3_CTS,
|
||||
/* SD */
|
||||
MX51_PAD_SD1_CMD__SD1_CMD,
|
||||
MX51_PAD_SD1_CLK__SD1_CLK,
|
||||
MX51_PAD_SD1_DATA0__SD1_DATA0,
|
||||
MX51_PAD_SD1_DATA1__SD1_DATA1,
|
||||
MX51_PAD_SD1_DATA2__SD1_DATA2,
|
||||
MX51_PAD_SD1_DATA3__SD1_DATA3,
|
||||
};
|
||||
|
||||
#define GPIO_LED1 (2 * 32 + 30)
|
||||
#define GPIO_SWITCH1 (2 * 32 + 31)
|
||||
|
||||
static struct gpio_led eukrea_mbimxsd_leds[] = {
|
||||
{
|
||||
.name = "led1",
|
||||
.default_trigger = "heartbeat",
|
||||
.active_low = 1,
|
||||
.gpio = GPIO_LED1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
|
||||
.leds = eukrea_mbimxsd_leds,
|
||||
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
|
||||
};
|
||||
|
||||
static struct platform_device eukrea_mbimxsd_leds_gpio = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &eukrea_mbimxsd_led_info,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
|
||||
{
|
||||
.gpio = GPIO_SWITCH1,
|
||||
.code = BTN_0,
|
||||
.desc = "BP1",
|
||||
.active_low = 1,
|
||||
.wakeup = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
|
||||
.buttons = eukrea_mbimxsd_gpio_buttons,
|
||||
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
|
||||
};
|
||||
|
||||
static struct platform_device eukrea_mbimxsd_button_device = {
|
||||
.name = "gpio-keys",
|
||||
.id = -1,
|
||||
.num_resources = 0,
|
||||
.dev = {
|
||||
.platform_data = &eukrea_mbimxsd_button_data,
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device *platform_devices[] __initdata = {
|
||||
&eukrea_mbimxsd_leds_gpio,
|
||||
&eukrea_mbimxsd_button_device,
|
||||
};
|
||||
|
||||
static const struct imxuart_platform_data uart_pdata __initconst = {
|
||||
.flags = IMXUART_HAVE_RTSCTS,
|
||||
};
|
||||
|
||||
static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("tlv320aic23", 0x1a),
|
||||
},
|
||||
};
|
||||
|
||||
/*
|
||||
* system init for baseboard usage. Will be called by cpuimx51sd init.
|
||||
*
|
||||
* Add platform devices present on this baseboard and init
|
||||
* them from CPU side as far as required to use them later on
|
||||
*/
|
||||
void __init eukrea_mbimxsd51_baseboard_init(void)
|
||||
{
|
||||
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
|
||||
ARRAY_SIZE(eukrea_mbimxsd_pads)))
|
||||
printk(KERN_ERR "error setting mbimxsd pads !\n");
|
||||
|
||||
imx51_add_imx_uart(1, NULL);
|
||||
imx51_add_imx_uart(2, &uart_pdata);
|
||||
|
||||
imx51_add_esdhc(0, NULL);
|
||||
|
||||
gpio_request(GPIO_LED1, "LED1");
|
||||
gpio_direction_output(GPIO_LED1, 1);
|
||||
gpio_free(GPIO_LED1);
|
||||
|
||||
gpio_request(GPIO_SWITCH1, "SWITCH1");
|
||||
gpio_direction_input(GPIO_SWITCH1);
|
||||
gpio_free(GPIO_SWITCH1);
|
||||
|
||||
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
|
||||
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
|
||||
|
||||
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
||||
}
|
||||
|
|
@ -28,19 +28,22 @@
|
|||
* its own devices, it calls baseboard's init function.
|
||||
* TODO: Add your own baseboard init function and call it from
|
||||
* inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
|
||||
* eukrea_cpuimx35_init() or eukrea_cpuimx51_init().
|
||||
* eukrea_cpuimx35_init() eukrea_cpuimx51_init()
|
||||
* or eukrea_cpuimx51sd_init().
|
||||
*
|
||||
* This example here is for the development board. Refer
|
||||
* mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
|
||||
* mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
|
||||
* mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
|
||||
* mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
|
||||
* mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd
|
||||
*/
|
||||
|
||||
extern void eukrea_mbimxsd25_baseboard_init(void);
|
||||
extern void eukrea_mbimx27_baseboard_init(void);
|
||||
extern void eukrea_mbimxsd35_baseboard_init(void);
|
||||
extern void eukrea_mbimx51_baseboard_init(void);
|
||||
extern void eukrea_mbimxsd51_baseboard_init(void);
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -99,6 +99,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
|
|||
uart_base = MX3X_UART2_BASE_ADDR;
|
||||
break;
|
||||
case MACH_TYPE_MX51_BABBAGE:
|
||||
case MACH_TYPE_EUKREA_CPUIMX51SD:
|
||||
uart_base = MX51_UART1_BASE_ADDR;
|
||||
break;
|
||||
default:
|
||||
|
|
|
|||
Loading…
Reference in a new issue