ide: use I/O ops directly in ide-dma.c

Use I/O ops directly in ide_dma_host_set(), ide_dma_setup(),
ide_dma_start() and __ide_dma_end().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2008-07-23 19:55:50 +02:00
parent b2f951aabc
commit ab86f91e87

View file

@ -376,7 +376,10 @@ void ide_dma_host_set(ide_drive_t *drive, int on)
else
dma_stat &= ~(1 << (5 + unit));
hwif->OUTB(dma_stat, hwif->dma_status);
if (hwif->host_flags & IDE_HFLAG_MMIO)
writeb(dma_stat, (void __iomem *)hwif->dma_status);
else
outb(dma_stat, hwif->dma_status);
}
EXPORT_SYMBOL_GPL(ide_dma_host_set);
@ -449,6 +452,7 @@ int ide_dma_setup(ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
struct request *rq = HWGROUP(drive)->rq;
unsigned int reading;
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
u8 dma_stat;
if (rq_data_dir(rq))
@ -470,13 +474,20 @@ int ide_dma_setup(ide_drive_t *drive)
outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS);
/* specify r/w */
hwif->OUTB(reading, hwif->dma_command);
if (mmio)
writeb(reading, (void __iomem *)hwif->dma_command);
else
outb(reading, hwif->dma_command);
/* read DMA status for INTR & ERROR flags */
dma_stat = hwif->read_sff_dma_status(hwif);
/* clear INTR & ERROR flags */
hwif->OUTB(dma_stat|6, hwif->dma_status);
if (mmio)
writeb(dma_stat | 6, (void __iomem *)hwif->dma_status);
else
outb(dma_stat | 6, hwif->dma_status);
drive->waiting_for_dma = 1;
return 0;
}
@ -492,16 +503,23 @@ EXPORT_SYMBOL_GPL(ide_dma_exec_cmd);
void ide_dma_start(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 dma_cmd = hwif->INB(hwif->dma_command);
ide_hwif_t *hwif = drive->hwif;
u8 dma_cmd;
/* Note that this is done *after* the cmd has
* been issued to the drive, as per the BM-IDE spec.
* The Promise Ultra33 doesn't work correctly when
* we do this part before issuing the drive cmd.
*/
/* start DMA */
hwif->OUTB(dma_cmd|1, hwif->dma_command);
if (hwif->host_flags & IDE_HFLAG_MMIO) {
dma_cmd = readb((void __iomem *)hwif->dma_command);
/* start DMA */
writeb(dma_cmd | 1, (void __iomem *)hwif->dma_command);
} else {
dma_cmd = inb(hwif->dma_command);
outb(dma_cmd | 1, hwif->dma_command);
}
hwif->dma = 1;
wmb();
}
@ -511,18 +529,31 @@ EXPORT_SYMBOL_GPL(ide_dma_start);
/* returns 1 on error, 0 otherwise */
int __ide_dma_end (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
ide_hwif_t *hwif = drive->hwif;
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
u8 dma_stat = 0, dma_cmd = 0;
drive->waiting_for_dma = 0;
/* get dma_command mode */
dma_cmd = hwif->INB(hwif->dma_command);
/* stop DMA */
hwif->OUTB(dma_cmd&~1, hwif->dma_command);
if (mmio) {
/* get DMA command mode */
dma_cmd = readb((void __iomem *)hwif->dma_command);
/* stop DMA */
writeb(dma_cmd & ~1, (void __iomem *)hwif->dma_command);
} else {
dma_cmd = inb(hwif->dma_command);
outb(dma_cmd & ~1, hwif->dma_command);
}
/* get DMA status */
dma_stat = hwif->read_sff_dma_status(hwif);
/* clear the INTR & ERROR bits */
hwif->OUTB(dma_stat|6, hwif->dma_status);
if (mmio)
/* clear the INTR & ERROR bits */
writeb(dma_stat | 6, (void __iomem *)hwif->dma_status);
else
outb(dma_stat | 6, hwif->dma_status);
/* purge DMA mappings */
ide_destroy_dmatable(drive);
/* verify good DMA status */