libata: restore SControl on detach

Save SControl during probing and restore it on detach.  This prevents
adjustments made by libata drivers to seep into the next driver which
gets attached (be it a libata one or not).

It's not clear whether SControl also needs to be restored on suspend.
The next system to have control (ACPI or kexec'd kernel) would
probably like to see the original SControl value but there's no
guarantee that a link is gonna keep working after SControl is adjusted
without a reset and adding a reset and modified recovery cycle soley
for this is an overkill.  For now, do it only for detach.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Tejun Heo 2008-07-31 16:09:34 +09:00 committed by Jeff Garzik
parent da0e21d3fa
commit d127ea7b86
2 changed files with 6 additions and 5 deletions

View file

@ -5199,15 +5199,14 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
*/
int sata_link_init_spd(struct ata_link *link)
{
u32 scontrol;
u8 spd;
int rc;
rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
if (rc)
return rc;
spd = (scontrol >> 4) & 0xf;
spd = (link->saved_scontrol >> 4) & 0xf;
if (spd)
link->hw_sata_spd_limit &= (1 << spd) - 1;
@ -5794,9 +5793,10 @@ static void ata_port_detach(struct ata_port *ap)
ata_port_wait_eh(ap);
/* EH is now guaranteed to see UNLOADING - EH context belongs
* to us. Disable all existing devices.
* to us. Restore SControl and disable all existing devices.
*/
ata_port_for_each_link(link, ap) {
__ata_port_for_each_link(link, ap) {
sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
ata_link_for_each_dev(dev, link)
ata_dev_disable(dev);
}

View file

@ -647,6 +647,7 @@ struct ata_link {
unsigned int flags; /* ATA_LFLAG_xxx */
u32 saved_scontrol; /* SControl on probe */
unsigned int hw_sata_spd_limit;
unsigned int sata_spd_limit;
unsigned int sata_spd; /* current SATA PHY speed */