Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits)
  [POWERPC] Abolish powerpc_flash_init()
  [POWERPC] Early serial debug support for PPC44x
  [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc
  [POWERPC] Add device tree for Ebony
  [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now
  [POWERPC] MPIC U3/U4 MSI backend
  [POWERPC] MPIC MSI allocator
  [POWERPC] Enable MSI mappings for MPIC
  [POWERPC] Tell Phyp we support MSI
  [POWERPC] RTAS MSI implementation
  [POWERPC] PowerPC MSI infrastructure
  [POWERPC] Rip out the existing powerpc msi stubs
  [POWERPC] Remove use of 4level-fixup.h for ppc32
  [POWERPC] Add powerpc PCI-E reset API implementation
  [POWERPC] Holly bootwrapper
  [POWERPC] Holly DTS
  [POWERPC] Holly defconfig
  [POWERPC] Add support for 750CL Holly board
  [POWERPC] Generalize tsi108 PCI setup
  [POWERPC] Generalize tsi108 PHY types
  ...

Fixed conflict in include/asm-powerpc/kdebug.h manually

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Linus Torvalds 2007-05-08 11:50:19 -07:00
commit df6d3916f3
217 changed files with 8196 additions and 2140 deletions

View file

@ -1560,6 +1560,9 @@ platforms are moved over to use the flattened-device-tree model.
network device. This is used by the bootwrapper to interpret
MAC addresses passed by the firmware when no information other
than indices is available to associate an address with a device.
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "tbi",
or "rtbi".
Example:
ucc@2000 {
@ -1574,6 +1577,7 @@ platforms are moved over to use the flattened-device-tree model.
rx-clock = "none";
tx-clock = "clk9";
phy-handle = <212000>;
phy-connection-type = "gmii";
pio-handle = <140001>;
};

View file

@ -117,6 +117,9 @@ config GENERIC_BUG
default y
depends on BUG
config SYS_SUPPORTS_APM_EMULATION
bool
#
# Powerpc uses the slab allocator to manage its ptes and the
# page structs of ptes are used for splitting the page table
@ -136,6 +139,11 @@ config DEFAULT_UIMAGE
Used to allow a board to specify it wants a uImage built by default
default n
config PPC64_SWSUSP
bool
depends on PPC64 && (BROKEN || (PPC_PMAC64 && EXPERIMENTAL))
default y
menu "Processor support"
choice
prompt "Processor Type"
@ -206,6 +214,7 @@ config 40x
config 44x
bool "AMCC 44x"
select PPC_DCR_NATIVE
select WANT_DEVICE_TREE
config E200
bool "Freescale e200"
@ -270,9 +279,14 @@ config PPC_OF_PLATFORM_PCI
depends on PPC64 # not supported on 32 bits yet
default n
config 4xx
bool
depends on 40x || 44x
default y
config BOOKE
bool
depends on E200 || E500
depends on E200 || E500 || 44x
default y
config FSL_BOOKE
@ -669,11 +683,12 @@ config MCA
config PCI
bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
|| MPC7448HPC2 || PPC_PS3
|| MPC7448HPC2 || PPC_PS3 || PPC_HOLLY
default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
&& !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
default PCI_QSPAN if !4xx && !CPM2 && 8xx
select ARCH_SUPPORTS_MSI
help
Find out whether your system includes a PCI bus. PCI is the name of
a bus system, i.e. the way the CPU talks to the other stuff inside

View file

@ -139,10 +139,6 @@ config BOOTX_TEXT
Say Y here to see progress messages from the boot firmware in text
mode. Requires either BootX or Open Firmware.
config SERIAL_TEXT_DEBUG
bool "Support for early boot texts over serial port"
depends on 4xx
config PPC_EARLY_DEBUG
bool "Early debugging (dangerous)"
@ -207,6 +203,24 @@ config PPC_EARLY_DEBUG_BEAT
help
Select this to enable early debugging for Celleb with Beat.
config PPC_EARLY_DEBUG_44x
bool "Early serial debugging for IBM/AMCC 44x CPUs"
depends on 44x
select PPC_UDBG_16550
help
Select this to enable early debugging for IBM 44x chips via the
inbuilt serial port.
endchoice
config PPC_EARLY_DEBUG_44x_PHYSLOW
hex "Low 32 bits of early debug UART physical address"
depends PPC_EARLY_DEBUG_44x
default "0x40000200"
config PPC_EARLY_DEBUG_44x_PHYSHIGH
hex "EPRN of early debug UART physical address"
depends PPC_EARLY_DEBUG_44x
default "0x1"
endmenu

View file

@ -148,7 +148,7 @@ all: $(KBUILD_IMAGE)
CPPFLAGS_vmlinux.lds := -Upowerpc
BOOT_TARGETS = zImage zImage.initrd uImage cuImage
BOOT_TARGETS = zImage zImage.initrd uImage
PHONY += $(BOOT_TARGETS)

40
arch/powerpc/boot/44x.c Normal file
View file

@ -0,0 +1,40 @@
/*
* Copyright 2007 David Gibson, IBM Corporation.
*
* Based on earlier code:
* Matt Porter <mporter@kernel.crashing.org>
* Copyright 2002-2005 MontaVista Software Inc.
*
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003, 2004 Zultys Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <stddef.h>
#include "types.h"
#include "string.h"
#include "stdio.h"
#include "ops.h"
#include "reg.h"
#include "dcr.h"
/* Read the 44x memory controller to get size of system memory. */
void ibm44x_fixup_memsize(void)
{
int i;
unsigned long memsize, bank_config;
memsize = 0;
for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) {
mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]);
bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
if (bank_config & SDRAM_CONFIG_BANK_ENABLE)
memsize += SDRAM_CONFIG_BANK_SIZE(bank_config);
}
dt_fixup_memory(0, memsize);
}

16
arch/powerpc/boot/44x.h Normal file
View file

@ -0,0 +1,16 @@
/*
* PowerPC 44x related functions
*
* Copyright 2007 David Gibson, IBM Corporation.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef _PPC_BOOT_44X_H_
#define _PPC_BOOT_44X_H_
void ibm44x_fixup_memsize(void);
void ebony_init(void *mac0, void *mac1);
#endif /* _PPC_BOOT_44X_H_ */

View file

@ -37,13 +37,15 @@ zlib := inffast.c inflate.c inftrees.c
zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
zliblinuxheader := zlib.h zconf.h zutil.h
$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \
$(addprefix $(obj)/,$(zlibheader))
$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c
src-plat := of.c cuboot-83xx.c cuboot-85xx.c
gunzip_util.c elf_util.c $(zlib) devtree.c \
44x.c ebony.c
src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
cuboot-ebony.c treeboot-ebony.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@ -129,7 +131,14 @@ image-$(CONFIG_PPC_CELLEB) += zImage.pseries
image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
image-$(CONFIG_DEFAULT_UIMAGE) += uImage cuImage
image-$(CONFIG_PPC_HOLLY) += zImage.holly-elf
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
ifneq ($(CONFIG_DEVICE_TREE),"")
image-$(CONFIG_PPC_83xx) += cuImage.83xx
image-$(CONFIG_PPC_85xx) += cuImage.85xx
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
endif
# For 32-bit powermacs, build the COFF and miboot images
# as well as the ELF images.
@ -138,7 +147,8 @@ image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot
endif
initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
initrd-y := $(patsubst zImage%, zImage.initrd%, $(image-y))
initrd-y := $(patsubst zImage%, zImage.initrd%, \
$(patsubst treeImage%, treeImage.initrd%, $(image-y)))
initrd-y := $(filter-out $(image-y), $(initrd-y))
targets += $(image-y) $(initrd-y)
@ -159,18 +169,27 @@ $(obj)/zImage.ps3: vmlinux
$(obj)/zImage.initrd.ps3: vmlinux
@echo " WARNING zImage.initrd.ps3 not supported (yet)"
$(obj)/zImage.holly-elf: vmlinux $(wrapperbits)
$(call if_changed,wrap,holly,$(obj)/dts/holly.dts,,)
$(obj)/zImage.initrd.holly-elf: vmlinux $(wrapperbits) $(obj)/ramdisk.image.gz
$(call if_changed,wrap,holly,$(obj)/dts/holly.dts,,$(obj)/ramdisk.image.gz)
$(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot)
cuboot-plat-$(CONFIG_83xx) += 83xx
cuboot-plat-$(CONFIG_85xx) += 85xx
cuboot-plat-y += unknown-platform
# CONFIG_DEVICE_TREE will have "" around it, make sure to strip them
dts = $(if $(shell echo $(CONFIG_DEVICE_TREE) | grep '^/'),\
,$(srctree)/$(src)/dts/)$(CONFIG_DEVICE_TREE)
,$(srctree)/$(src)/dts/)$(CONFIG_DEVICE_TREE:"%"=%)
$(obj)/cuImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,cuboot-$(word 1,$(cuboot-plat-y)),$(dts))
$(obj)/cuImage.%: vmlinux $(dts) $(wrapperbits)
$(call if_changed,wrap,cuboot-$*,$(dts))
$(obj)/treeImage.%: vmlinux $(dts) $(wrapperbits)
$(call if_changed,wrap,treeboot-$*,$(dts))
$(obj)/treeImage.initrd.%: vmlinux $(dts) $(wrapperbits)
$(call if_changed,wrap,treeboot-$*,$(dts),,$(obj)/ramdisk.image.gz)
$(obj)/zImage: $(addprefix $(obj)/, $(image-y))
@rm -f $@; ln $< $@
@ -181,8 +200,8 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
# anything not in $(targets)
clean-files += $(image-) $(initrd-) zImage zImage.initrd \
cuImage.elf cuImage.bin.gz
clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* \
treeImage.*
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin

View file

@ -0,0 +1,42 @@
/*
* Old U-boot compatibility for Ebony
*
* Author: David Gibson <david@gibson.dropbear.id.au>
*
* Copyright 2007 David Gibson, IBM Corporatio.
* Based on cuboot-83xx.c, which is:
* Copyright (c) 2007 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include "ops.h"
#include "stdio.h"
#include "44x.h"
#define TARGET_44x
#include "ppcboot.h"
static bd_t bd;
extern char _end[];
BSS_STACK(4096);
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
unsigned long end_of_ram = bd.bi_memstart + bd.bi_memsize;
unsigned long avail_ram = end_of_ram - (unsigned long)_end;
memcpy(&bd, (bd_t *)r3, sizeof(bd));
loader_info.initrd_addr = r4;
loader_info.initrd_size = r4 ? r5 : 0;
loader_info.cmdline = (char *)r6;
loader_info.cmdline_len = r7 - r6;
simple_alloc_init(_end, avail_ram, 32, 64);
ebony_init(&bd.bi_enetaddr, &bd.bi_enet1addr);
}

87
arch/powerpc/boot/dcr.h Normal file
View file

@ -0,0 +1,87 @@
#ifndef _PPC_BOOT_DCR_H_
#define _PPC_BOOT_DCR_H_
#define mfdcr(rn) \
({ \
unsigned long rval; \
asm volatile("mfdcr %0,%1" : "=r"(rval) : "i"(rn)); \
rval; \
})
#define mtdcr(rn, val) \
asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val))
/* 440GP/440GX SDRAM controller DCRs */
#define DCRN_SDRAM0_CFGADDR 0x010
#define DCRN_SDRAM0_CFGDATA 0x011
#define SDRAM0_B0CR 0x40
#define SDRAM0_B1CR 0x44
#define SDRAM0_B2CR 0x48
#define SDRAM0_B3CR 0x4c
static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2CR, SDRAM0_B3CR };
#define SDRAM_CONFIG_BANK_ENABLE 0x00000001
#define SDRAM_CONFIG_SIZE_MASK 0x000e0000
#define SDRAM_CONFIG_BANK_SIZE(reg) \
(0x00400000 << ((reg & SDRAM_CONFIG_SIZE_MASK) >> 17))
/* 440GP Clock, PM, chip control */
#define DCRN_CPC0_SR 0x0b0
#define DCRN_CPC0_ER 0x0b1
#define DCRN_CPC0_FR 0x0b2
#define DCRN_CPC0_SYS0 0x0e0
#define CPC0_SYS0_TUNE 0xffc00000
#define CPC0_SYS0_FBDV_MASK 0x003c0000
#define CPC0_SYS0_FWDVA_MASK 0x00038000
#define CPC0_SYS0_FWDVB_MASK 0x00007000
#define CPC0_SYS0_OPDV_MASK 0x00000c00
#define CPC0_SYS0_EPDV_MASK 0x00000300
/* Helper macros to compute the actual clock divider values from the
* encodings in the CPC0 register */
#define CPC0_SYS0_FBDV(reg) \
((((((reg) & CPC0_SYS0_FBDV_MASK) >> 18) - 1) & 0xf) + 1)
#define CPC0_SYS0_FWDVA(reg) \
(8 - (((reg) & CPC0_SYS0_FWDVA_MASK) >> 15))
#define CPC0_SYS0_FWDVB(reg) \
(8 - (((reg) & CPC0_SYS0_FWDVB_MASK) >> 12))
#define CPC0_SYS0_OPDV(reg) \
((((reg) & CPC0_SYS0_OPDV_MASK) >> 10) + 1)
#define CPC0_SYS0_EPDV(reg) \
((((reg) & CPC0_SYS0_EPDV_MASK) >> 8) + 1)
#define CPC0_SYS0_EXTSL 0x00000080
#define CPC0_SYS0_RW_MASK 0x00000060
#define CPC0_SYS0_RL 0x00000010
#define CPC0_SYS0_ZMIISL_MASK 0x0000000c
#define CPC0_SYS0_BYPASS 0x00000002
#define CPC0_SYS0_NTO1 0x00000001
#define DCRN_CPC0_SYS1 0x0e1
#define DCRN_CPC0_CUST0 0x0e2
#define DCRN_CPC0_CUST1 0x0e3
#define DCRN_CPC0_STRP0 0x0e4
#define DCRN_CPC0_STRP1 0x0e5
#define DCRN_CPC0_STRP2 0x0e6
#define DCRN_CPC0_STRP3 0x0e7
#define DCRN_CPC0_GPIO 0x0e8
#define DCRN_CPC0_PLB 0x0e9
#define DCRN_CPC0_CR1 0x0ea
#define DCRN_CPC0_CR0 0x0eb
#define CPC0_CR0_SWE 0x80000000
#define CPC0_CR0_CETE 0x40000000
#define CPC0_CR0_U1FCS 0x20000000
#define CPC0_CR0_U0DTE 0x10000000
#define CPC0_CR0_U0DRE 0x08000000
#define CPC0_CR0_U0DC 0x04000000
#define CPC0_CR0_U1DTE 0x02000000
#define CPC0_CR0_U1DRE 0x01000000
#define CPC0_CR0_U1DC 0x00800000
#define CPC0_CR0_U0EC 0x00400000
#define CPC0_CR0_U1EC 0x00200000
#define CPC0_CR0_UDIV_MASK 0x001f0000
#define CPC0_CR0_UDIV(reg) \
((((reg) & CPC0_CR0_UDIV_MASK) >> 16) + 1)
#define DCRN_CPC0_MIRQ0 0x0ec
#define DCRN_CPC0_MIRQ1 0x0ed
#define DCRN_CPC0_JTAGID 0x0ef
#endif /* _PPC_BOOT_DCR_H_ */

View file

@ -0,0 +1,307 @@
/*
* Device Tree Source for IBM Ebony
*
* Copyright (c) 2006, 2007 IBM Corp.
* Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
*
* FIXME: Draft only!
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*
* To build:
* dtc -I dts -O asm -o ebony.S -b 0 ebony.dts
* dtc -I dts -O dtb -o ebony.dtb -b 0 ebony.dts
*/
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "ibm,ebony";
compatible = "ibm,ebony";
dcr-parent = <&/cpus/PowerPC,440GP@0>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,440GP@0 {
device_type = "cpu";
reg = <0>;
clock-frequency = <0>; // Filled in by zImage
timebase-frequency = <0>; // Filled in by zImage
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <0>;
d-cache-size = <0>;
dcr-controller;
dcr-access-method = "native";
};
};
memory {
device_type = "memory";
reg = <0 0 0>; // Filled in by zImage
};
UIC0: interrupt-controller0 {
device_type = "ibm,uic";
compatible = "ibm,uic-440gp", "ibm,uic";
interrupt-controller;
cell-index = <0>;
dcr-reg = <0c0 009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
UIC1: interrupt-controller1 {
device_type = "ibm,uic";
compatible = "ibm,uic-440gp", "ibm,uic";
interrupt-controller;
cell-index = <1>;
dcr-reg = <0d0 009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <1e 4 1f 4>; /* cascade */
interrupt-parent = <&UIC0>;
};
CPC0: cpc {
device_type = "ibm,cpc";
compatible = "ibm,cpc-440gp";
dcr-reg = <0b0 003 0e0 010>;
// FIXME: anything else?
};
plb {
device_type = "ibm,plb";
compatible = "ibm,plb-440gp", "ibm,plb4";
#address-cells = <2>;
#size-cells = <1>;
ranges;
clock-frequency = <0>; // Filled in by zImage
SDRAM0: sdram {
device_type = "memory-controller";
compatible = "ibm,sdram-440gp", "ibm,sdram";
dcr-reg = <010 2>;
// FIXME: anything else?
};
DMA0: dma {
// FIXME: ???
device_type = "ibm,dma-4xx";
compatible = "ibm,dma-440gp", "ibm,dma-4xx";
dcr-reg = <100 027>;
};
MAL0: mcmal {
device_type = "mcmal-dma";
compatible = "ibm,mcmal-440gp", "ibm,mcmal";
dcr-reg = <180 62>;
num-tx-chans = <4>;
num-rx-chans = <4>;
interrupt-parent = <&MAL0>;
interrupts = <0 1 2 3 4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
/*RXEOB*/ 1 &UIC0 b 4
/*SERR*/ 2 &UIC1 0 4
/*TXDE*/ 3 &UIC1 1 4
/*RXDE*/ 4 &UIC1 2 4>;
interrupt-map-mask = <ffffffff>;
};
POB0: opb {
device_type = "ibm,opb";
compatible = "ibm,opb-440gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
/* Wish there was a nicer way of specifying a full 32-bit
range */
ranges = <00000000 1 00000000 80000000
80000000 1 80000000 80000000>;
dcr-reg = <090 00b>;
interrupt-parent = <&UIC1>;
interrupts = <7 4>;
clock-frequency = <0>; // Filled in by zImage
EBC0: ebc {
device_type = "ibm,ebc";
compatible = "ibm,ebc-440gp";
dcr-reg = <012 2>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; // Filled in by zImage
ranges = <0 00000000 fff00000 100000
1 00000000 48000000 100000
2 00000000 ff800000 400000
3 00000000 48200000 100000
7 00000000 48300000 100000>;
interrupts = <5 4>;
interrupt-parent = <&UIC1>;
small-flash@0,0 {
device_type = "rom";
compatible = "direct-mapped";
probe-type = "JEDEC";
bank-width = <1>;
partitions = <0 80000>;
partition-names = "OpenBIOS";
reg = <0 80000 80000>;
};
ds1743@1,0 {
/* NVRAM & RTC */
device_type = "nvram";
compatible = "ds1743";
reg = <1 0 2000>;
};
large-flash@2,0 {
device_type = "rom";
compatible = "direct-mapped";
probe-type = "JEDEC";
bank-width = <1>;
partitions = <0 380000
280000 80000>;
partition-names = "fs", "firmware";
reg = <2 0 400000>;
};
ir@3,0 {
reg = <3 0 10>;
};
fpga@7,0 {
compatible = "Ebony-FPGA";
reg = <7 0 10>;
};
};
UART0: serial@40000200 {
device_type = "serial";
compatible = "ns16550";
reg = <40000200 8>;
virtual-reg = <e0000200>;
clock-frequency = <A8C000>;
current-speed = <2580>;
interrupt-parent = <&UIC0>;
interrupts = <0 4>;
};
UART1: serial@40000300 {
device_type = "serial";
compatible = "ns16550";
reg = <40000300 8>;
virtual-reg = <e0000300>;
clock-frequency = <A8C000>;
current-speed = <2580>;
interrupt-parent = <&UIC0>;
interrupts = <1 4>;
};
IIC0: i2c@40000400 {
/* FIXME */
device_type = "i2c";
compatible = "ibm,iic-440gp", "ibm,iic";
reg = <40000400 14>;
interrupt-parent = <&UIC0>;
interrupts = <2 4>;
};
IIC1: i2c@40000500 {
/* FIXME */
device_type = "i2c";
compatible = "ibm,iic-440gp", "ibm,iic";
reg = <40000500 14>;
interrupt-parent = <&UIC0>;
interrupts = <3 4>;
};
GPIO0: gpio@40000700 {
/* FIXME */
device_type = "gpio";
compatible = "ibm,gpio-440gp";
reg = <40000700 20>;
};
ZMII0: emac-zmii@40000780 {
device_type = "emac-zmii";
compatible = "ibm,zmii-440gp", "ibm,zmii";
reg = <40000780 c>;
};
EMAC0: ethernet@40000800 {
linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
interrupts = <1c 4 1d 4>;
reg = <40000800 70>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <5dc>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rmii";
phy-map = <00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
EMAC1: ethernet@40000900 {
linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
interrupts = <1e 4 1f 4>;
reg = <40000900 70>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <2 3>;
mal-rx-channel = <1>;
cell-index = <1>;
max-frame-size = <5dc>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rmii";
phy-map = <00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
GPT0: gpt@40000a00 {
/* FIXME */
reg = <40000a00 d4>;
interrupt-parent = <&UIC0>;
interrupts = <12 4 13 4 14 4 15 4 16 4>;
};
};
PCIX0: pci@1234 {
device_type = "pci";
/* FIXME */
reg = <2 0ec00000 8
2 0ec80000 f0
2 0ec80100 fc>;
};
};
chosen {
linux,stdout-path = "/plb/opb/serial@40000200";
// linux,initrd-start = <0>; /* FIXME */
// linux,initrd-end = <0>;
// bootargs = "";
};
};

View file

@ -0,0 +1,198 @@
/*
* Device Tree Source for IBM Holly (PPC 750CL with TSI controller)
* Copyright 2007, IBM Corporation
*
* Stephen Winiecki <stevewin@us.ibm.com>
* Josh Boyer <jwboyer@linux.vnet.ibm.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*
* To build:
* dtc -I dts -O asm -o holly.S -b 0 holly.dts
* dtc -I dts -O dtb -o holly.dtb -b 0 holly.dts
*/
/ {
model = "41K7339";
compatible = "ibm,holly";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells =<0>;
PowerPC,750CL@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>;
i-cache-line-size = <20>;
d-cache-size = <8000>;
i-cache-size = <8000>;
d-cache-sets = <80>;
i-cache-sets = <80>;
timebase-frequency = <2faf080>;
clock-frequency = <23c34600>;
bus-frequency = <bebc200>;
32-bit;
};
};
memory@0 {
device_type = "memory";
reg = <00000000 20000000>;
};
tsi109@c0000000 {
device_type = "tsi-bridge";
compatible = "tsi-bridge";
#address-cells = <1>;
#size-cells = <1>;
ranges = <00000000 c0000000 00010000>;
reg = <c0000000 00010000>;
i2c@7000 {
device_type = "i2c";
compatible = "tsi-i2c";
interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
interrupts = <e 2>;
reg = <7000 400>;
};
mdio@6000 {
device_type = "mdio";
compatible = "tsi-ethernet";
PHY1: ethernet-phy@6000 {
device_type = "ethernet-phy";
compatible = "bcm54xx";
reg = <6000 50>;
phy-id = <1>;
};
PHY2: ethernet-phy@6400 {
device_type = "ethernet-phy";
compatible = "bcm54xx";
reg = <6000 50>;
phy-id = <2>;
};
};
ethernet@6200 {
device_type = "network";
compatible = "tsi-ethernet";
#address-cells = <1>;
#size-cells = <0>;
reg = <6000 200>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
interrupts = <10 2>;
phy-handle = <&PHY1>;
};
ethernet@6600 {
device_type = "network";
compatible = "tsi-ethernet";
#address-cells = <1>;
#size-cells = <0>;
reg = <6400 200>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
interrupts = <11 2>;
phy-handle = <&PHY2>;
};
serial@7808 {
device_type = "serial";
compatible = "ns16550";
reg = <7808 200>;
virtual-reg = <c0007808>;
clock-frequency = <3F9C6000>;
current-speed = <1c200>;
interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
interrupts = <c 2>;
};
serial@7c08 {
device_type = "serial";
compatible = "ns16550";
reg = <7c08 200>;
virtual-reg = <c0007c08>;
clock-frequency = <3F9C6000>;
current-speed = <1c200>;
interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
interrupts = <d 2>;
};
MPIC: pic@7400 {
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
#interrupt-cells = <2>;
reg = <7400 400>;
big-endian;
};
pci@1000 {
device_type = "pci";
compatible = "tsi109";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <1000 1000>;
bus-range = <0 0>;
/*----------------------------------------------------+
| PCI memory range.
| 01 denotes I/O space
| 02 denotes 32-bit memory space
+----------------------------------------------------*/
ranges = <02000000 0 40000000 40000000 0 10000000
01000000 0 00000000 7e000000 0 00010000>;
clock-frequency = <7f28154>;
interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
interrupts = <17 2>;
interrupt-map-mask = <f800 0 0 7>;
/*----------------------------------------------------+
| The INTA, INTB, INTC, INTD are shared.
+----------------------------------------------------*/
interrupt-map = <
0800 0 0 1 &RT0 24 0
0800 0 0 2 &RT0 25 0
0800 0 0 3 &RT0 26 0
0800 0 0 4 &RT0 27 0
1000 0 0 1 &RT0 25 0
1000 0 0 2 &RT0 26 0
1000 0 0 3 &RT0 27 0
1000 0 0 4 &RT0 24 0
1800 0 0 1 &RT0 26 0
1800 0 0 2 &RT0 27 0
1800 0 0 3 &RT0 24 0
1800 0 0 4 &RT0 25 0
2000 0 0 1 &RT0 27 0
2000 0 0 2 &RT0 24 0
2000 0 0 3 &RT0 25 0
2000 0 0 4 &RT0 26 0
>;
RT0: router@1180 {
device_type = "pic-router";
interrupt-controller;
big-endian;
clock-frequency = <0>;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <17 2>;
interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
};
};
};
chosen {
linux,stdout-path = "/tsi109@c0000000/serial@7808";
bootargs = "console=ttyS0,115200";
};
};

View file

@ -48,6 +48,7 @@
soc5200@f0000000 {
model = "fsl,mpc5200";
compatible = "mpc5200";
revision = "" // from bootloader
#interrupt-cells = <3>;
device_type = "soc";
@ -166,7 +167,7 @@
device_type = "mscan";
compatible = "mpc5200-mscan";
cell-index = <1>;
interrupts = <1 12 0>;
interrupts = <2 12 0>;
interrupt-parent = <500>;
reg = <980 80>;
};
@ -178,7 +179,7 @@
interrupt-parent = <500>;
};
gpio-wkup@b00 {
gpio-wkup@c00 {
compatible = "mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
@ -317,20 +318,22 @@
i2c@3d00 {
device_type = "i2c";
compatible = "mpc5200-i2c";
compatible = "mpc5200-i2c\0fsl-i2c";
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
fsl5200-clocking;
};
i2c@3d40 {
device_type = "i2c";
compatible = "mpc5200-i2c";
compatible = "mpc5200-i2c\0fsl-i2c";
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
fsl5200-clocking;
};
sram@8000 {
device_type = "sram";

View file

@ -48,6 +48,7 @@
soc5200@f0000000 {
model = "fsl,mpc5200b";
compatible = "mpc5200";
revision = ""; // from bootloader
#interrupt-cells = <3>;
device_type = "soc";
@ -166,7 +167,7 @@
device_type = "mscan";
compatible = "mpc5200b-mscan\0mpc5200-mscan";
cell-index = <1>;
interrupts = <1 12 0>;
interrupts = <2 12 0>;
interrupt-parent = <500>;
reg = <980 80>;
};
@ -178,7 +179,7 @@
interrupt-parent = <500>;
};
gpio-wkup@b00 {
gpio-wkup@c00 {
compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
@ -322,20 +323,22 @@
i2c@3d00 {
device_type = "i2c";
compatible = "mpc5200b-i2c\0mpc5200-i2c";
compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
fsl5200-clocking;
};
i2c@3d40 {
device_type = "i2c";
compatible = "mpc5200b-i2c\0mpc5200-i2c";
compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
fsl5200-clocking;
};
sram@8000 {
device_type = "sram";

View file

@ -306,14 +306,12 @@
interrupts = <11 8>;
reg = <3>;
device_type = "ethernet-phy";
interface = <3>; //ENET_100_MII
};
phy4: ethernet-phy@04 {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <4>;
device_type = "ethernet-phy";
interface = <3>;
};
};

View file

@ -265,14 +265,12 @@
interrupts = <0>;
reg = <0>;
device_type = "ethernet-phy";
interface = <3>; //ENET_100_MII
};
phy04:ethernet-phy@04 {
interrupt-parent = <&pic>;
interrupts = <0>;
reg = <4>;
device_type = "ethernet-phy";
interface = <3>;
};
};

View file

@ -305,6 +305,7 @@
rx-clock = <0>;
tx-clock = <19>;
phy-handle = < &phy0 >;
phy-connection-type = "rgmii-id";
pio-handle = < &pio1 >;
};
@ -320,6 +321,7 @@
rx-clock = <0>;
tx-clock = <14>;
phy-handle = < &phy1 >;
phy-connection-type = "rgmii-id";
pio-handle = < &pio2 >;
};
@ -335,14 +337,12 @@
interrupts = <11 8>;
reg = <0>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
phy1: ethernet-phy@01 {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <1>;
device_type = "ethernet-phy";
interface = <6>;
};
};

View file

@ -288,6 +288,7 @@
rx-clock = <0>;
tx-clock = <19>;
phy-handle = <&qe_phy0>;
phy-connection-type = "gmii";
pio-handle = <&pio1>;
};
@ -303,6 +304,7 @@
rx-clock = <0>;
tx-clock = <14>;
phy-handle = <&qe_phy1>;
phy-connection-type = "gmii";
pio-handle = <&pio2>;
};
@ -320,28 +322,24 @@
interrupts = <31 1>;
reg = <0>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <1>;
device_type = "ethernet-phy";
interface = <6>;
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <2>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <3>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
};

129
arch/powerpc/boot/ebony.c Normal file
View file

@ -0,0 +1,129 @@
/*
* Copyright 2007 David Gibson, IBM Corporation.
*
* Based on earlier code:
* Copyright (C) Paul Mackerras 1997.
*
* Matt Porter <mporter@kernel.crashing.org>
* Copyright 2002-2005 MontaVista Software Inc.
*
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003, 2004 Zultys Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <stdarg.h>
#include <stddef.h>
#include "types.h"
#include "elf.h"
#include "string.h"
#include "stdio.h"
#include "page.h"
#include "ops.h"
#include "reg.h"
#include "dcr.h"
#include "44x.h"
extern char _dtb_start[];
extern char _dtb_end[];
static u8 *ebony_mac0, *ebony_mac1;
/* Calculate 440GP clocks */
void ibm440gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
{
u32 sys0 = mfdcr(DCRN_CPC0_SYS0);
u32 cr0 = mfdcr(DCRN_CPC0_CR0);
u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
u32 opdv = CPC0_SYS0_OPDV(sys0);
u32 epdv = CPC0_SYS0_EPDV(sys0);
if (sys0 & CPC0_SYS0_BYPASS) {
/* Bypass system PLL */
cpu = plb = sysclk;
} else {
if (sys0 & CPC0_SYS0_EXTSL)
/* PerClk */
m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv;
else
/* CPU clock */
m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0);
cpu = sysclk * m / CPC0_SYS0_FWDVA(sys0);
plb = sysclk * m / CPC0_SYS0_FWDVB(sys0);
}
opb = plb / opdv;
ebc = opb / epdv;
/* FIXME: Check if this is for all 440GP, or just Ebony */
if ((mfpvr() & 0xf0000fff) == 0x40000440)
/* Rev. B 440GP, use external system clock */
tb = sysclk;
else
/* Rev. C 440GP, errata force us to use internal clock */
tb = cpu;
if (cr0 & CPC0_CR0_U0EC)
/* External UART clock */
uart0 = ser_clk;
else
/* Internal UART clock */
uart0 = plb / CPC0_CR0_UDIV(cr0);
if (cr0 & CPC0_CR0_U1EC)
/* External UART clock */
uart1 = ser_clk;
else
/* Internal UART clock */
uart1 = plb / CPC0_CR0_UDIV(cr0);
printf("PPC440GP: SysClk = %dMHz (%x)\n\r",
(sysclk + 500000) / 1000000, sysclk);
dt_fixup_cpu_clocks(cpu, tb, 0);
dt_fixup_clock("/plb", plb);
dt_fixup_clock("/plb/opb", opb);
dt_fixup_clock("/plb/opb/ebc", ebc);
dt_fixup_clock("/plb/opb/serial@40000200", uart0);
dt_fixup_clock("/plb/opb/serial@40000300", uart1);
}
static void ebony_fixups(void)
{
// FIXME: sysclk should be derived by reading the FPGA registers
unsigned long sysclk = 33000000;
ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
ibm44x_fixup_memsize();
dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
}
#define SPRN_DBCR0 0x134
#define DBCR0_RST_SYSTEM 0x30000000
static void ebony_exit(void)
{
unsigned long tmp;
asm volatile (
"mfspr %0,%1\n"
"oris %0,%0,%2@h\n"
"mtspr %1,%0"
: "=&r"(tmp) : "i"(SPRN_DBCR0), "i"(DBCR0_RST_SYSTEM)
);
}
void ebony_init(void *mac0, void *mac1)
{
platform_ops.fixups = ebony_fixups;
platform_ops.exit = ebony_exit;
ebony_mac0 = mac0;
ebony_mac1 = mac1;
ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
serial_console_init();
}

38
arch/powerpc/boot/holly.c Normal file
View file

@ -0,0 +1,38 @@
/*
* Copyright 2007 IBM Corporation
*
* Stephen Winiecki <stevewin@us.ibm.com>
* Josh Boyer <jwboyer@linux.vnet.ibm.com>
*
* Based on earlier code:
* Copyright (C) Paul Mackerras 1997.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#include <stdarg.h>
#include <stddef.h>
#include "types.h"
#include "elf.h"
#include "string.h"
#include "stdio.h"
#include "page.h"
#include "ops.h"
#include "io.h"
extern char _start[];
extern char _end[];
extern char _dtb_start[];
extern char _dtb_end[];
BSS_STACK(4096);
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
{
u32 heapsize = 0x8000000 - (u32)_end; /* 128M */
simple_alloc_init(_end, heapsize, 32, 64);
ft_init(_dtb_start, 0, 4);
serial_console_init();
}

View file

@ -46,8 +46,8 @@ int main(int argc, char *argv[])
struct stat st;
boot_block_t bt;
if (argc < 3) {
fprintf(stderr, "usage: %s <zImage-file> <boot-image> [entry-point]\n",argv[0]);
if (argc < 5) {
fprintf(stderr, "usage: %s <zImage-file> <boot-image> <load address> <entry point>\n",argv[0]);
exit(1);
}
@ -61,10 +61,8 @@ int main(int argc, char *argv[])
bt.bb_magic = htonl(0x0052504F);
/* If we have the optional entry point parameter, use it */
if (argc == 4)
bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0));
else
bt.bb_dest = bt.bb_entry_point = htonl(0x500000);
bt.bb_dest = htonl(strtoul(argv[3], NULL, 0));
bt.bb_entry_point = htonl(strtoul(argv[4], NULL, 0));
/* We know these from the linker command.
* ...and then move it up into memory a little more so the

View file

@ -0,0 +1,34 @@
/*
* Old U-boot compatibility for Ebony
*
* Author: David Gibson <david@gibson.dropbear.id.au>
*
* Copyright 2007 David Gibson, IBM Corporatio.
* Based on cuboot-83xx.c, which is:
* Copyright (c) 2007 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include "ops.h"
#include "stdio.h"
#include "44x.h"
extern char _end[];
BSS_STACK(4096);
#define OPENBIOS_MAC_BASE 0xfffffe0c
#define OPENBIOS_MAC_OFFSET 0xc
void platform_init(void)
{
unsigned long end_of_ram = 0x8000000;
unsigned long avail_ram = end_of_ram - (unsigned long)_end;
simple_alloc_init(_end, avail_ram, 32, 64);
ebony_init((u8 *)OPENBIOS_MAC_BASE,
(u8 *)(OPENBIOS_MAC_BASE + OPENBIOS_MAC_OFFSET));
}

View file

@ -163,20 +163,19 @@ fi
vmz="$vmz$gzip"
case "$platform" in
uboot|cuboot*)
version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
cut -d' ' -f3`
if [ -n "$version" ]; then
version="-n Linux-$version"
fi
esac
# Extract kernel version information, some platforms want to include
# it in the image header
version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
cut -d' ' -f3`
if [ -n "$version" ]; then
uboot_version="-n Linux-$version"
fi
case "$platform" in
uboot)
rm -f "$ofile"
mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
$version -d "$vmz" "$ofile"
$uboot_version -d "$vmz" "$ofile"
if [ -z "$cacheit" ]; then
rm -f "$vmz"
fi
@ -212,25 +211,32 @@ if [ "$platform" != "miboot" ]; then
rm $tmp
fi
# Some platforms need the zImage's entry point and base address
base=0x`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1`
entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3`
# post-processing needed for some platforms
case "$platform" in
pseries|chrp)
$object/addnote "$ofile"
;;
pmaccoff)
entry=`objdump -f "$ofile" | grep '^start address ' | \
cut -d' ' -f3`
${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
$object/hack-coff "$ofile"
;;
cuboot*)
base=`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1`
entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | \
cut -d' ' -f3`
mv "$ofile" "$ofile".elf
${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin
gzip -f -9 "$ofile".bin
mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
$version -d "$ofile".bin.gz "$ofile"
$uboot_version -d "$ofile".bin.gz "$ofile"
;;
treeboot*)
mv "$ofile" "$ofile.elf"
$object/mktree "$ofile.elf" "$ofile" "$base" "$entry"
if [ -z "$cacheit" ]; then
rm -f "$ofile.elf"
fi
exit 0
;;
esac

View file

@ -0,0 +1,905 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21
# Fri May 4 13:47:08 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#
# CONFIG_CLASSIC32 is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_44x=y
# CONFIG_E200 is not set
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
CONFIG_4xx=y
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_EBONY=y
CONFIG_440GP=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPM2 is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_SECCOMP=y
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE="ebony.dts"
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_PPC_INDIRECT_PCI_BE is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x01000000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=35000
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_RXB=128
CONFIG_IBM_NEW_EMAC_TXB=64
CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
# CONFIG_IBM_NEW_EMAC_DEBUG is not set
CONFIG_IBM_NEW_EMAC_ZMII=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
# CONFIG_UCC_FAST is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#

File diff suppressed because it is too large Load diff

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc5
# Tue Jan 30 14:27:25 2007
# Linux kernel version: 2.6.21-rc5
# Mon Apr 9 16:09:16 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_83xx=y
@ -63,6 +63,7 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
@ -71,6 +72,7 @@ CONFIG_SYSVIPC=y
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@ -123,16 +125,17 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_QUICC_ENGINE=y
CONFIG_PPC_GEN550=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
# Platform support
#
# CONFIG_MPC8313_RDB is not set
CONFIG_MPC832x_MDS=y
# CONFIG_MPC834x_SYS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC8360E_PB is not set
# CONFIG_MPC836x_MDS is not set
CONFIG_PPC_MPC832x=y
# CONFIG_MPIC is not set
@ -163,6 +166,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@ -172,6 +176,7 @@ CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@ -220,6 +225,7 @@ CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@ -324,6 +330,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
@ -342,7 +349,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@ -482,7 +488,21 @@ CONFIG_NETDEVICES=y
#
# PHY device support
#
# CONFIG_PHYLIB is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
@ -524,11 +544,13 @@ CONFIG_UCC_GETH=y
# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMOND is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
@ -621,6 +643,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@ -691,6 +714,7 @@ CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
@ -738,6 +762,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
@ -778,6 +803,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
@ -791,10 +821,9 @@ CONFIG_HWMON=y
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@ -805,6 +834,7 @@ CONFIG_FIRMWARE_EDID=y
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
@ -868,6 +898,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
@ -995,11 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# QE Options
#
CONFIG_UCC_SLOW=y
# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
@ -1012,7 +1042,8 @@ CONFIG_BITREVERSE=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
#
# Instrumentation Support
@ -1032,7 +1063,6 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@ -1061,8 +1091,10 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
@ -1076,6 +1108,7 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc3
# Mon Mar 12 17:32:19 2007
# Linux kernel version: 2.6.21-rc5
# Mon Apr 9 16:12:43 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
@ -125,7 +125,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_QUICC_ENGINE=y
CONFIG_PPC_GEN550=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
@ -490,7 +489,21 @@ CONFIG_NETDEVICES=y
#
# PHY device support
#
# CONFIG_PHYLIB is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
@ -1200,11 +1213,7 @@ CONFIG_NLS_ISO8859_1=y
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# QE Options
#
CONFIG_UCC_SLOW=y
# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
@ -1238,7 +1247,6 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20
# Sat Feb 17 10:09:26 2007
# Linux kernel version: 2.6.21-rc5
# Mon Apr 9 16:14:05 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
@ -72,6 +72,7 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@ -124,7 +125,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_QUICC_ENGINE=y
CONFIG_PPC_GEN550=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
@ -132,6 +132,7 @@ CONFIG_PPC_GEN550=y
#
# CONFIG_MPC8313_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
CONFIG_MPC836x_MDS=y
@ -328,6 +329,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
@ -346,7 +348,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@ -486,7 +487,21 @@ CONFIG_NETDEVICES=y
#
# PHY device support
#
# CONFIG_PHYLIB is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
@ -528,6 +543,7 @@ CONFIG_UCC_GETH=y
# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMOND is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
@ -745,6 +761,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
@ -785,6 +802,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
@ -798,10 +820,9 @@ CONFIG_HWMON=y
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@ -1007,11 +1028,7 @@ CONFIG_PARTITION_ADVANCED=y
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# QE Options
#
CONFIG_UCC_SLOW=y
# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
@ -1045,7 +1062,6 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#

View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc6
# Thu Jan 25 13:35:34 2007
# Linux kernel version: 2.6.21
# Mon Apr 30 12:03:35 2007
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@ -60,6 +60,7 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
@ -69,6 +70,7 @@ CONFIG_SYSVIPC=y
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@ -131,13 +133,36 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_MPC52xx is not set
# CONFIG_PPC_MPC5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_CELLEB is not set
CONFIG_PPC_PS3=y
#
# PS3 Platform Options
#
# CONFIG_PS3_ADVANCED is not set
CONFIG_PS3_HTAB_SIZE=20
# CONFIG_PS3_DYNAMIC_DMA is not set
CONFIG_PS3_USE_LPAR_ADDR=y
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
CONFIG_PS3_SYS_MANAGER=y
CONFIG_PPC_CELL=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
CONFIG_PPC_PS3=y
#
# Cell Broadband Engine options
#
CONFIG_SPU_FS=y
CONFIG_SPU_BASE=y
# CONFIG_PQ2ADS is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_U3_DART is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
@ -146,24 +171,7 @@ CONFIG_PPC_PS3=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
# CONFIG_MPIC is not set
#
# Cell Broadband Engine options
#
CONFIG_SPU_FS=y
CONFIG_SPU_BASE=y
# CONFIG_CBE_RAS is not set
#
# PS3 Platform Options
#
CONFIG_PS3_HTAB_SIZE=20
# CONFIG_PS3_DYNAMIC_DMA is not set
CONFIG_PS3_USE_LPAR_ADDR=y
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
# CONFIG_CPM2 is not set
#
# Kernel options
@ -179,10 +187,10 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_IOMMU_VMERGE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_KEXEC is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
# CONFIG_NUMA is not set
@ -203,22 +211,22 @@ CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_64K_PAGES=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="root=/dev/sda1 ip=dhcp"
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
@ -240,10 +248,13 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@ -261,7 +272,7 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
@ -270,9 +281,23 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@ -313,7 +338,31 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
# CONFIG_BT_RFCOMM_TTY is not set
# CONFIG_BT_BNEP is not set
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_IEEE80211 is not set
#
@ -327,16 +376,13 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
@ -347,24 +393,27 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65535
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
@ -388,7 +437,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
@ -413,6 +462,7 @@ CONFIG_BLK_DEV_SR=y
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_ESP_CORE is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
@ -460,7 +510,7 @@ CONFIG_NETDEVICES=y
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=y
CONFIG_MII=m
#
# Ethernet (1000 Mbit)
@ -475,9 +525,10 @@ CONFIG_MII=y
#
#
# Wireless LAN (non-hamradio)
# Wireless LAN
#
# CONFIG_NET_RADIO is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# Wan interfaces
@ -551,7 +602,8 @@ CONFIG_HW_CONSOLE=y
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
#
# IPMI
@ -597,6 +649,11 @@ CONFIG_GEN_RTC=y
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
@ -611,15 +668,22 @@ CONFIG_GEN_RTC=y
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_OF is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
@ -634,7 +698,7 @@ CONFIG_FB_PS3_DEFAULT_SIZE_M=18
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@ -646,17 +710,62 @@ CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ALSA PowerMac devices
#
#
# ALSA PowerMac requires I2C
#
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
@ -665,13 +774,13 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
@ -704,7 +813,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
@ -720,10 +829,16 @@ CONFIG_USB_STORAGE=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
@ -736,6 +851,7 @@ CONFIG_USB_HID=y
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
@ -748,15 +864,16 @@ CONFIG_USB_HID=y
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET_MII=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_MCS7830=m
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
@ -781,6 +898,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@ -791,6 +909,8 @@ CONFIG_USB_MON=y
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
@ -845,6 +965,10 @@ CONFIG_USB_MON=y
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
@ -852,7 +976,9 @@ CONFIG_USB_MON=y
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@ -871,27 +997,30 @@ CONFIG_FS_MBCACHE=y
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
@ -933,7 +1062,7 @@ CONFIG_RAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
@ -941,10 +1070,16 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@ -1004,6 +1139,8 @@ CONFIG_NLS_ISO8859_1=y
# Distributed Lock Manager
#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
# CONFIG_UCC_FAST is not set
#
# Library routines
@ -1014,7 +1151,8 @@ CONFIG_BITREVERSE=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
#
# Instrumentation Support
@ -1032,16 +1170,16 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@ -1051,8 +1189,10 @@ CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LIST=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
# CONFIG_BOOTX_TEXT is not set
@ -1063,6 +1203,8 @@ CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
#
# Security options
@ -1073,4 +1215,43 @@ CONFIG_PPC_EARLY_DEBUG=y
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#

View file

@ -36,8 +36,9 @@ obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o suspend.o
obj32-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_32.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend.o
obj64-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_64.o swsusp_asm64.o
obj32-$(CONFIG_MODULES) += module_32.o
ifeq ($(CONFIG_PPC_MERGE),y)
@ -67,6 +68,7 @@ obj-$(CONFIG_MODULES) += $(module-y)
pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o
pci32-$(CONFIG_PPC32) := pci_32.o
obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y)
obj-$(CONFIG_PCI_MSI) += msi.o
kexec-$(CONFIG_PPC64) := machine_kexec_64.o
kexec-$(CONFIG_PPC32) := machine_kexec_32.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y)

View file

@ -21,12 +21,12 @@
#include <linux/types.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/suspend.h>
#ifdef CONFIG_PPC64
#include <linux/time.h>
#include <linux/hardirq.h>
#else
#include <linux/ptrace.h>
#include <linux/suspend.h>
#endif
#include <asm/io.h>
@ -257,11 +257,11 @@ int main(void)
DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
DEFINE(CPU_SPEC_RESTORE, offsetof(struct cpu_spec, cpu_restore));
#ifndef CONFIG_PPC64
DEFINE(pbe_address, offsetof(struct pbe, address));
DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
DEFINE(pbe_next, offsetof(struct pbe, next));
#ifndef CONFIG_PPC64
DEFINE(TASK_SIZE, TASK_SIZE);
DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28);
#endif /* ! CONFIG_PPC64 */

View file

@ -120,8 +120,8 @@ skpinv: addi r4,r4,1 /* Increment */
* Configure and load pinned entry into TLB slot 63.
*/
lis r3,KERNELBASE@h /* Load the kernel virtual address */
ori r3,r3,KERNELBASE@l
lis r3,PAGE_OFFSET@h
ori r3,r3,PAGE_OFFSET@l
/* Kernel is at the base of RAM */
li r4, 0 /* Load the kernel physical address */
@ -172,36 +172,28 @@ skpinv: addi r4,r4,1 /* Increment */
isync
4:
#ifdef CONFIG_SERIAL_TEXT_DEBUG
/*
* Add temporary UART mapping for early debug.
* We can map UART registers wherever we want as long as they don't
* interfere with other system mappings (e.g. with pinned entries).
* For an example of how we handle this - see ocotea.h. --ebs
*/
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
/* Add UART mapping for early debug. */
/* pageid fields */
lis r3,UART0_IO_BASE@h
ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
/* xlat fields */
lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */
#ifndef CONFIG_440EP
ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */
#endif
lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
/* attrib fields */
li r5,0
ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
li r0,62 /* TLB slot 0 */
li r0,0 /* TLB slot 0 */
tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
tlbwe r3,r0,PPC44x_TLB_PAGEID
tlbwe r4,r0,PPC44x_TLB_XLAT
tlbwe r5,r0,PPC44x_TLB_ATTRIB
/* Force context change */
isync
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
/* Establish the interrupt vector offsets */
SET_IVOR(0, CriticalInput);
@ -709,16 +701,6 @@ _GLOBAL(giveup_fpu)
blr
#endif
/*
* extern void abort(void)
*
* At present, this routine just applies a system reset.
*/
_GLOBAL(abort)
mfspr r13,SPRN_DBCR0
oris r13,r13,DBCR0_RST_SYSTEM@h
mtspr SPRN_DBCR0,r13
_GLOBAL(set_context)
#ifdef CONFIG_BDI_SWITCH

View file

@ -33,8 +33,11 @@
#include <asm/smp.h>
#ifdef CONFIG_HOTPLUG_CPU
/* this is used for software suspend, and that shuts down
* CPUs even while the system is still booting... */
#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \
system_state == SYSTEM_RUNNING)
(system_state == SYSTEM_RUNNING \
|| system_state == SYSTEM_BOOTING))
#else
#define cpu_should_die() 0
#endif

View file

@ -53,3 +53,24 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
isync
b 1b
_GLOBAL(power4_cpu_offline_powersave)
/* Go to NAP now */
mfmsr r7
rldicl r0,r7,48,1
rotldi r0,r0,16
mtmsrd r0,1 /* hard-disable interrupts */
li r0,1
li r6,0
stb r0,PACAHARDIRQEN(r13) /* we'll hard-enable shortly */
stb r6,PACASOFTIRQEN(r13) /* soft-disable irqs */
BEGIN_FTR_SECTION
DSSALL
sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
ori r7,r7,MSR_EE
oris r7,r7,MSR_POW@h
sync
isync
mtmsrd r7
isync
blr

View file

@ -67,6 +67,7 @@
#ifdef CONFIG_PPC64
#include <asm/paca.h>
#include <asm/firmware.h>
#include <asm/lv1call.h>
#endif
int __irq_offset_value;
@ -162,6 +163,16 @@ void local_irq_restore(unsigned long en)
local_paca->hard_enabled = en;
if ((int)mfspr(SPRN_DEC) < 0)
mtspr(SPRN_DEC, 1);
/*
* Force the delivery of pending soft-disabled interrupts on PS3.
* Any HV call will have this side effect.
*/
if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
u64 tmp;
lv1_get_version_info(&tmp);
}
hard_irq_enable();
}
#endif /* CONFIG_PPC64 */
@ -947,33 +958,6 @@ arch_initcall(irq_late_init);
#endif /* CONFIG_PPC_MERGE */
#ifdef CONFIG_PCI_MSI
int pci_enable_msi(struct pci_dev * pdev)
{
if (ppc_md.enable_msi)
return ppc_md.enable_msi(pdev);
else
return -1;
}
EXPORT_SYMBOL(pci_enable_msi);
void pci_disable_msi(struct pci_dev * pdev)
{
if (ppc_md.disable_msi)
ppc_md.disable_msi(pdev);
}
EXPORT_SYMBOL(pci_disable_msi);
void pci_scan_msi_device(struct pci_dev *dev) {}
int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec) {return -1;}
void pci_disable_msix(struct pci_dev *dev) {}
void msi_remove_pci_irq_vectors(struct pci_dev *dev) {}
void pci_no_msi(void) {}
EXPORT_SYMBOL(pci_enable_msix);
EXPORT_SYMBOL(pci_disable_msix);
#endif
#ifdef CONFIG_PPC64
static int __init setup_noirqdistrib(char *str)
{

View file

@ -401,7 +401,7 @@ out:
return 1;
}
static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@ -486,14 +486,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
if (post_kprobe_handler(args->regs))
ret = NOTIFY_STOP;
break;
case DIE_PAGE_FAULT:
/* kprobe_running() needs smp_processor_id() */
preempt_disable();
if (kprobe_running() &&
kprobe_fault_handler(args->regs, args->trapnr))
ret = NOTIFY_STOP;
preempt_enable();
break;
default:
break;
}

View file

@ -244,9 +244,9 @@ static int __init add_legacy_pci_port(struct device_node *np,
* doesn't work for these settings, you'll have to add your own special
* cases here
*/
if (device_is_compatible(pci_dev, "pci13a8,152") ||
device_is_compatible(pci_dev, "pci13a8,154") ||
device_is_compatible(pci_dev, "pci13a8,158")) {
if (of_device_is_compatible(pci_dev, "pci13a8,152") ||
of_device_is_compatible(pci_dev, "pci13a8,154") ||
of_device_is_compatible(pci_dev, "pci13a8,158")) {
addr += 0x200 * lindex;
base += 0x200 * lindex;
} else {
@ -365,11 +365,11 @@ void __init find_legacy_serial_ports(void)
/* Check for known pciclass, and also check wether we have
* a device with child nodes for ports or not
*/
if (device_is_compatible(np, "pciclass,0700") ||
device_is_compatible(np, "pciclass,070002"))
if (of_device_is_compatible(np, "pciclass,0700") ||
of_device_is_compatible(np, "pciclass,070002"))
pci = np;
else if (device_is_compatible(parent, "pciclass,0700") ||
device_is_compatible(parent, "pciclass,070002"))
else if (of_device_is_compatible(parent, "pciclass,0700") ||
of_device_is_compatible(parent, "pciclass,070002"))
pci = parent;
else {
of_node_put(parent);

38
arch/powerpc/kernel/msi.c Normal file
View file

@ -0,0 +1,38 @@
/*
* Copyright 2006-2007, Michael Ellerman, IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/msi.h>
#include <asm/machdep.h>
int arch_msi_check_device(struct pci_dev* dev, int nvec, int type)
{
if (!ppc_md.setup_msi_irqs || !ppc_md.teardown_msi_irqs) {
pr_debug("msi: Platform doesn't provide MSI callbacks.\n");
return -ENOSYS;
}
if (ppc_md.msi_check_device) {
pr_debug("msi: Using platform check routine.\n");
return ppc_md.msi_check_device(dev, nvec, type);
}
return 0;
}
int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
return ppc_md.setup_msi_irqs(dev, nvec, type);
}
void arch_teardown_msi_irqs(struct pci_dev *dev)
{
return ppc_md.teardown_msi_irqs(dev);
}

View file

@ -27,7 +27,7 @@ const struct of_device_id *of_match_node(const struct of_device_id *matches,
match &= node->type
&& !strcmp(matches->type, node->type);
if (matches->compatible[0])
match &= device_is_compatible(node,
match &= of_device_is_compatible(node,
matches->compatible);
if (match)
return matches;
@ -120,8 +120,8 @@ void of_device_unregister(struct of_device *ofdev)
}
static ssize_t of_device_get_modalias(struct of_device *ofdev,
char *str, ssize_t len)
ssize_t of_device_get_modalias(struct of_device *ofdev,
char *str, ssize_t len)
{
const char *compat;
int cplen, i;
@ -239,3 +239,4 @@ EXPORT_SYMBOL(of_dev_get);
EXPORT_SYMBOL(of_dev_put);
EXPORT_SYMBOL(of_release_dev);
EXPORT_SYMBOL(of_device_uevent);
EXPORT_SYMBOL(of_device_get_modalias);

View file

@ -29,7 +29,6 @@
#include <asm/ppc-pci.h>
#include <asm/atomic.h>
/*
* The list of OF IDs below is used for matching bus types in the
* system whose devices are to be exposed as of_platform_devices.

View file

@ -1658,7 +1658,7 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
int i;
if (page_is_ram(pfn))
return prot;
return __pgprot(prot);
prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;

View file

@ -1006,8 +1006,9 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
switch ((pci_space >> 24) & 0x3) {
case 1: /* I/O space */
hose->io_base_phys = cpu_phys_addr;
hose->pci_io_size = size;
hose->io_base_phys = cpu_phys_addr - pci_addr;
/* handle from 0 to top of I/O window */
hose->pci_io_size = pci_addr + size;
res = &hose->io_resource;
res->flags = IORESOURCE_IO;
@ -1117,8 +1118,8 @@ static int get_bus_io_range(struct pci_bus *bus, unsigned long *start_phys,
} else {
/* Root Bus */
res = &hose->io_resource;
*start_phys = hose->io_base_phys;
*start_virt = (unsigned long) hose->io_base_virt;
*start_phys = hose->io_base_phys + res->start;
*start_virt = (unsigned long) hose->io_base_virt + res->start;
if (res->end > res->start)
*size = res->end - res->start + 1;
else {

View file

@ -66,7 +66,6 @@ EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(DMA_MODE_READ);
EXPORT_SYMBOL(DMA_MODE_WRITE);
EXPORT_SYMBOL(__div64_32);
EXPORT_SYMBOL(do_signal);
EXPORT_SYMBOL(transfer_to_handler);

View file

@ -635,6 +635,12 @@ static void __init early_cmdline_parse(void)
/* ibm,dynamic-reconfiguration-memory property supported */
#define OV5_DRCONF_MEMORY 0x20
#define OV5_LARGE_PAGES 0x10 /* large pages supported */
/* PCIe/MSI support. Without MSI full PCIe is not supported */
#ifdef CONFIG_PCI_MSI
#define OV5_MSI 0x01 /* PCIe/MSI support */
#else
#define OV5_MSI 0x00
#endif /* CONFIG_PCI_MSI */
/*
* The architecture vector has an array of PVR mask/value pairs,
@ -679,7 +685,7 @@ static unsigned char ibm_architecture_vec[] = {
/* option vector 5: PAPR/OF options */
3 - 2, /* length */
0, /* don't ignore, don't halt */
OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY,
OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY | OV5_MSI,
};
/* Old method - ELF header with PT_NOTE sections */
@ -967,7 +973,7 @@ static unsigned long __init prom_next_cell(int s, cell_t **cellp)
* If problems seem to show up, it would be a good start to track
* them down.
*/
static void reserve_mem(u64 base, u64 size)
static void __init reserve_mem(u64 base, u64 size)
{
u64 top = base + size;
unsigned long cnt = RELOC(mem_reserve_cnt);
@ -2153,7 +2159,7 @@ static void __init fixup_device_tree_efika(void)
3,12,0, 3,13,0, 3,14,0, 3,15,0 };
struct subst_entry efika_subst_table[] = {
{ "/", "device_type", prop_cstr("efika") },
{ "/builtin", "compatible", prop_cstr("soc") },
{ "/builtin", "device_type", prop_cstr("soc") },
{ "/builtin/ata", "compatible", prop_cstr("mpc5200b-ata\0mpc5200-ata"), },
{ "/builtin/bestcomm", "compatible", prop_cstr("mpc5200b-bestcomm\0mpc5200-bestcomm") },
{ "/builtin/bestcomm", "interrupts", prop_bcomm_irq, sizeof(prop_bcomm_irq) },

View file

@ -1042,3 +1042,28 @@ const void *of_get_mac_address(struct device_node *np)
}
EXPORT_SYMBOL(of_get_mac_address);
int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
{
int irq = irq_of_parse_and_map(dev, index);
/* Only dereference the resource if both the
* resource and the irq are valid. */
if (r && irq != NO_IRQ) {
r->start = r->end = irq;
r->flags = IORESOURCE_IRQ;
}
return irq;
}
EXPORT_SYMBOL_GPL(of_irq_to_resource);
void __iomem *of_iomap(struct device_node *np, int index)
{
struct resource res;
if (of_address_to_resource(np, index, &res))
return NULL;
return ioremap(res.start, 1 + res.end - res.start);
}
EXPORT_SYMBOL(of_iomap);

View file

@ -176,10 +176,10 @@ static struct call_data_struct {
#define SMP_CALL_TIMEOUT 8
/*
* This function sends a 'generic call function' IPI to all other CPUs
* in the system.
* These functions send a 'generic call function' IPI to other online
* CPUS in the system.
*
* [SUMMARY] Run a function on all other CPUs.
* [SUMMARY] Run a function on other CPUs.
* <func> The function to run. This must be fast and non-blocking.
* <info> An arbitrary pointer to pass to the function.
* <nonatomic> currently unused.
@ -190,18 +190,26 @@ static struct call_data_struct {
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler.
*/
int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
int wait)
{
int smp_call_function_map(void (*func) (void *info), void *info, int nonatomic,
int wait, cpumask_t map)
{
struct call_data_struct data;
int ret = -1, cpus;
int ret = -1, num_cpus;
int cpu;
u64 timeout;
/* Can deadlock when called with interrupts disabled */
WARN_ON(irqs_disabled());
/* remove 'self' from the map */
if (cpu_isset(smp_processor_id(), map))
cpu_clear(smp_processor_id(), map);
/* sanity check the map, remove any non-online processors. */
cpus_and(map, map, cpu_online_map);
if (unlikely(smp_ops == NULL))
return -1;
return ret;
data.func = func;
data.info = info;
@ -213,40 +221,42 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
spin_lock(&call_lock);
/* Must grab online cpu count with preempt disabled, otherwise
* it can change. */
cpus = num_online_cpus() - 1;
if (!cpus) {
num_cpus = num_online_cpus() - 1;
if (!num_cpus || cpus_empty(map)) {
ret = 0;
goto out;
}
call_data = &data;
smp_wmb();
/* Send a message to all other CPUs and wait for them to respond */
smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_CALL_FUNCTION);
/* Send a message to all CPUs in the map */
for_each_cpu_mask(cpu, map)
smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec;
/* Wait for response */
while (atomic_read(&data.started) != cpus) {
/* Wait for indication that they have received the message */
while (atomic_read(&data.started) != num_cpus) {
HMT_low();
if (get_tb() >= timeout) {
printk("smp_call_function on cpu %d: other cpus not "
"responding (%d)\n", smp_processor_id(),
atomic_read(&data.started));
"responding (%d)\n", smp_processor_id(),
atomic_read(&data.started));
debugger(NULL);
goto out;
}
}
/* optionally wait for the CPUs to complete */
if (wait) {
while (atomic_read(&data.finished) != cpus) {
while (atomic_read(&data.finished) != num_cpus) {
HMT_low();
if (get_tb() >= timeout) {
printk("smp_call_function on cpu %d: other "
"cpus not finishing (%d/%d)\n",
smp_processor_id(),
atomic_read(&data.finished),
atomic_read(&data.started));
"cpus not finishing (%d/%d)\n",
smp_processor_id(),
atomic_read(&data.finished),
atomic_read(&data.started));
debugger(NULL);
goto out;
}
@ -262,8 +272,29 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
return ret;
}
int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
int wait)
{
return smp_call_function_map(func,info,nonatomic,wait,cpu_online_map);
}
EXPORT_SYMBOL(smp_call_function);
int smp_call_function_single(int cpu, void (*func) (void *info), void *info, int nonatomic,
int wait)
{
cpumask_t map=CPU_MASK_NONE;
if (!cpu_online(cpu))
return -EINVAL;
if (cpu == smp_processor_id())
return -EBUSY;
cpu_set(cpu, map);
return smp_call_function_map(func,info,nonatomic,wait,map);
}
EXPORT_SYMBOL(smp_call_function_single);
void smp_call_function_interrupt(void)
{
void (*func) (void *info);

View file

@ -0,0 +1,43 @@
/*
* Common powerpc suspend code for 32 and 64 bits
*
* Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/sched.h>
#include <asm/suspend.h>
#include <asm/system.h>
#include <asm/current.h>
#include <asm/mmu_context.h>
void save_processor_state(void)
{
/*
* flush out all the special registers so we don't need
* to save them in the snapshot
*/
flush_fp_to_thread(current);
flush_altivec_to_thread(current);
flush_spe_to_thread(current);
#ifdef CONFIG_PPC64
hard_irq_disable();
#endif
}
void restore_processor_state(void)
{
#ifdef CONFIG_PPC32
set_context(current->active_mm->context.id, current->active_mm->pgd);
#endif
#ifdef CONFIG_PPC64
hard_irq_enable();
#endif
}

View file

@ -0,0 +1,24 @@
/*
* PowerPC 64-bit swsusp implementation
*
* Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
*
* GPLv2
*/
#include <asm/system.h>
#include <asm/iommu.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
void do_after_copyback(void)
{
iommu_restore();
touch_softlockup_watchdog();
mb();
}
void _iommu_save(void)
{
iommu_save();
}

View file

@ -0,0 +1,228 @@
/*
* PowerPC 64-bit swsusp implementation
*
* Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
*
* GPLv2
*/
#include <linux/threads.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
/*
* Structure for storing CPU registers on the save area.
*/
#define SL_r1 0x00 /* stack pointer */
#define SL_PC 0x08
#define SL_MSR 0x10
#define SL_SDR1 0x18
#define SL_XER 0x20
#define SL_TB 0x40
#define SL_r2 0x48
#define SL_CR 0x50
#define SL_LR 0x58
#define SL_r12 0x60
#define SL_r13 0x68
#define SL_r14 0x70
#define SL_r15 0x78
#define SL_r16 0x80
#define SL_r17 0x88
#define SL_r18 0x90
#define SL_r19 0x98
#define SL_r20 0xa0
#define SL_r21 0xa8
#define SL_r22 0xb0
#define SL_r23 0xb8
#define SL_r24 0xc0
#define SL_r25 0xc8
#define SL_r26 0xd0
#define SL_r27 0xd8
#define SL_r28 0xe0
#define SL_r29 0xe8
#define SL_r30 0xf0
#define SL_r31 0xf8
#define SL_SIZE SL_r31+8
/* these macros rely on the save area being
* pointed to by r11 */
#define SAVE_SPECIAL(special) \
mf##special r0 ;\
std r0, SL_##special(r11)
#define RESTORE_SPECIAL(special) \
ld r0, SL_##special(r11) ;\
mt##special r0
#define SAVE_REGISTER(reg) \
std reg, SL_##reg(r11)
#define RESTORE_REGISTER(reg) \
ld reg, SL_##reg(r11)
/* space for storing cpu state */
.section .data
.align 5
swsusp_save_area:
.space SL_SIZE
.section ".toc","aw"
swsusp_save_area_ptr:
.tc swsusp_save_area[TC],swsusp_save_area
restore_pblist_ptr:
.tc restore_pblist[TC],restore_pblist
.section .text
.align 5
_GLOBAL(swsusp_arch_suspend)
ld r11,swsusp_save_area_ptr@toc(r2)
SAVE_SPECIAL(LR)
SAVE_REGISTER(r1)
SAVE_SPECIAL(CR)
SAVE_SPECIAL(TB)
SAVE_REGISTER(r2)
SAVE_REGISTER(r12)
SAVE_REGISTER(r13)
SAVE_REGISTER(r14)
SAVE_REGISTER(r15)
SAVE_REGISTER(r16)
SAVE_REGISTER(r17)
SAVE_REGISTER(r18)
SAVE_REGISTER(r19)
SAVE_REGISTER(r20)
SAVE_REGISTER(r21)
SAVE_REGISTER(r22)
SAVE_REGISTER(r23)
SAVE_REGISTER(r24)
SAVE_REGISTER(r25)
SAVE_REGISTER(r26)
SAVE_REGISTER(r27)
SAVE_REGISTER(r28)
SAVE_REGISTER(r29)
SAVE_REGISTER(r30)
SAVE_REGISTER(r31)
SAVE_SPECIAL(MSR)
SAVE_SPECIAL(SDR1)
SAVE_SPECIAL(XER)
/* we push the stack up 128 bytes but don't store the
* stack pointer on the stack like a real stackframe */
addi r1,r1,-128
bl _iommu_save
bl swsusp_save
/* restore LR */
ld r11,swsusp_save_area_ptr@toc(r2)
RESTORE_SPECIAL(LR)
addi r1,r1,128
blr
/* Resume code */
_GLOBAL(swsusp_arch_resume)
/* Stop pending alitvec streams and memory accesses */
BEGIN_FTR_SECTION
DSSALL
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
sync
ld r12,restore_pblist_ptr@toc(r2)
ld r12,0(r12)
cmpdi r12,0
beq- nothing_to_copy
li r15,512
copyloop:
ld r13,pbe_address(r12)
ld r14,pbe_orig_address(r12)
mtctr r15
li r10,0
copy_page_loop:
ldx r0,r10,r13
stdx r0,r10,r14
addi r10,r10,8
bdnz copy_page_loop
ld r12,pbe_next(r12)
cmpdi r12,0
bne+ copyloop
nothing_to_copy:
/* flush caches */
lis r3, 0x10
mtctr r3
li r3, 0
ori r3, r3, CONFIG_KERNEL_START>>48
li r0, 48
sld r3, r3, r0
li r0, 0
1:
dcbf r0,r3
addi r3,r3,0x20
bdnz 1b
sync
tlbia
ld r11,swsusp_save_area_ptr@toc(r2)
RESTORE_SPECIAL(CR)
/* restore timebase */
/* load saved tb */
ld r1, SL_TB(r11)
/* get upper 32 bits of it */
srdi r2, r1, 32
/* clear tb lower to avoid wrap */
li r0, 0
mttbl r0
/* set tb upper */
mttbu r2
/* set tb lower */
mttbl r1
/* restore registers */
RESTORE_REGISTER(r1)
RESTORE_REGISTER(r2)
RESTORE_REGISTER(r12)
RESTORE_REGISTER(r13)
RESTORE_REGISTER(r14)
RESTORE_REGISTER(r15)
RESTORE_REGISTER(r16)
RESTORE_REGISTER(r17)
RESTORE_REGISTER(r18)
RESTORE_REGISTER(r19)
RESTORE_REGISTER(r20)
RESTORE_REGISTER(r21)
RESTORE_REGISTER(r22)
RESTORE_REGISTER(r23)
RESTORE_REGISTER(r24)
RESTORE_REGISTER(r25)
RESTORE_REGISTER(r26)
RESTORE_REGISTER(r27)
RESTORE_REGISTER(r28)
RESTORE_REGISTER(r29)
RESTORE_REGISTER(r30)
RESTORE_REGISTER(r31)
/* can't use RESTORE_SPECIAL(MSR) */
ld r0, SL_MSR(r11)
mtmsrd r0, 0
RESTORE_SPECIAL(SDR1)
RESTORE_SPECIAL(XER)
sync
addi r1,r1,-128
bl slb_flush_and_rebolt
bl do_after_copyback
addi r1,r1,128
ld r11,swsusp_save_area_ptr@toc(r2)
RESTORE_SPECIAL(LR)
li r3, 0
blr

View file

@ -499,4 +499,4 @@ static int __init topology_init(void)
return 0;
}
__initcall(topology_init);
subsys_initcall(topology_init);

View file

@ -51,6 +51,9 @@ void __init udbg_early_init(void)
udbg_init_pas_realmode();
#elif defined(CONFIG_BOOTX_TEXT)
udbg_init_btext();
#elif defined(CONFIG_PPC_EARLY_DEBUG_44x)
/* PPC44x debug */
udbg_init_44x_as1();
#endif
}

View file

@ -191,3 +191,26 @@ void udbg_init_pas_realmode(void)
udbg_getc_poll = NULL;
}
#endif /* CONFIG_PPC_MAPLE */
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
#include <platforms/44x/44x.h>
static void udbg_44x_as1_putc(char c)
{
if (udbg_comport) {
while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
/* wait for idle */;
as1_writeb(c, &udbg_comport->thr); eieio();
if (c == '\n')
udbg_44x_as1_putc('\r');
}
}
void __init udbg_init_44x_as1(void)
{
udbg_comport =
(volatile struct NS16550 __iomem *)PPC44x_EARLY_DEBUG_VIRTADDR;
udbg_putc = udbg_44x_as1_putc;
}
#endif /* CONFIG_PPC_EARLY_DEBUG_44x */

View file

@ -117,7 +117,7 @@ static const struct vio_device_id *vio_match_device(
{
while (ids->type[0] != '\0') {
if ((strncmp(dev->type, ids->type, strlen(ids->type)) == 0) &&
device_is_compatible(dev->dev.archdata.of_node,
of_device_is_compatible(dev->dev.archdata.of_node,
ids->compat))
return ids;
ids++;

View file

@ -306,13 +306,15 @@ EXPORT_SYMBOL(__dma_free_coherent);
static int __init dma_alloc_init(void)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
int ret = 0;
do {
pgd = pgd_offset(&init_mm, CONSISTENT_BASE);
pmd = pmd_alloc(&init_mm, pgd, CONSISTENT_BASE);
pud = pud_alloc(&init_mm, pgd, CONSISTENT_BASE);
pmd = pmd_alloc(&init_mm, pud, CONSISTENT_BASE);
if (!pmd) {
printk(KERN_ERR "%s: no pmd tables\n", __func__);
ret = -ENOMEM;

View file

@ -24,73 +24,38 @@
*
*/
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/stddef.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/highmem.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/uaccess.h>
#include <asm/smp.h>
#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/page.h>
#include "mmu_decl.h"
extern char etext[], _stext[];
/* Used by the 44x TLB replacement exception handler.
* Just needed it declared someplace.
*/
unsigned int tlb_44x_index = 0;
unsigned int tlb_44x_hwater = 62;
unsigned int tlb_44x_index; /* = 0 */
unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
/*
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem
*/
static void __init
ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys)
static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
{
unsigned long attrib = 0;
__asm__ __volatile__("\
clrrwi %2,%2,10\n\
ori %2,%2,%4\n\
clrrwi %1,%1,10\n\
li %0,0\n\
ori %0,%0,%5\n\
tlbwe %2,%3,%6\n\
tlbwe %1,%3,%7\n\
tlbwe %0,%3,%8"
__asm__ __volatile__(
"tlbwe %2,%3,%4\n"
"tlbwe %1,%3,%5\n"
"tlbwe %0,%3,%6\n"
:
: "r" (attrib), "r" (phys), "r" (virt), "r" (slot),
"i" (PPC44x_TLB_VALID | PPC44x_TLB_256M),
"i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
"r" (phys),
"r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
"r" (tlb_44x_hwater--), /* slot for this TLB entry */
"i" (PPC44x_TLB_PAGEID),
"i" (PPC44x_TLB_XLAT),
"i" (PPC44x_TLB_ATTRIB));
}
/*
* MMU_init_hw does the chip-specific initialization of the MMU hardware.
*/
void __init MMU_init_hw(void)
{
flush_instruction_cache();
@ -98,22 +63,13 @@ void __init MMU_init_hw(void)
unsigned long __init mmu_mapin_ram(void)
{
unsigned int pinned_tlbs = 1;
int i;
unsigned long addr;
/* Determine number of entries necessary to cover lowmem */
pinned_tlbs = (unsigned int)
(_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT);
/* Write upper watermark to save location */
tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs;
/* If necessary, set additional pinned TLBs */
if (pinned_tlbs > 1)
for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) {
unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE;
ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr);
}
/* Pin in enough TLBs to cover any lowmem not covered by the
* initial 256M mapping established in head_44x.S */
for (addr = PPC_PIN_SIZE; addr < total_lowmem;
addr += PPC_PIN_SIZE)
ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
return total_lowmem;
}

View file

@ -39,37 +39,26 @@
#include <asm/tlbflush.h>
#include <asm/siginfo.h>
#ifdef CONFIG_KPROBES
ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
/* Hook to register for page fault notifications */
int register_page_fault_notifier(struct notifier_block *nb)
static inline int notify_page_fault(struct pt_regs *regs)
{
return atomic_notifier_chain_register(&notify_page_fault_chain, nb);
}
int ret = 0;
int unregister_page_fault_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_unregister(&notify_page_fault_chain, nb);
}
/* kprobe_running() needs smp_processor_id() */
if (!user_mode(regs)) {
preempt_disable();
if (kprobe_running() && kprobe_fault_handler(regs, 11))
ret = 1;
preempt_enable();
}
static inline int notify_page_fault(enum die_val val, const char *str,
struct pt_regs *regs, long err, int trap, int sig)
{
struct die_args args = {
.regs = regs,
.str = str,
.err = err,
.trapnr = trap,
.signr = sig
};
return atomic_notifier_call_chain(&notify_page_fault_chain, val, &args);
return ret;
}
#else
static inline int notify_page_fault(enum die_val val, const char *str,
struct pt_regs *regs, long err, int trap, int sig)
static inline int notify_page_fault(struct pt_regs *regs)
{
return NOTIFY_DONE;
return 0;
}
#endif
@ -175,8 +164,7 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
is_write = error_code & ESR_DST;
#endif /* CONFIG_4xx || CONFIG_BOOKE */
if (notify_page_fault(DIE_PAGE_FAULT, "page_fault", regs, error_code,
11, SIGSEGV) == NOTIFY_STOP)
if (notify_page_fault(regs))
return 0;
if (trap == 0x300) {

View file

@ -26,6 +26,7 @@
#include <asm/tlb.h>
#include <asm/cputable.h>
#include <asm/udbg.h>
#include <asm/kexec.h>
#ifdef DEBUG_LOW
#define DBG_LOW(fmt...) udbg_printf(fmt)
@ -340,31 +341,70 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long va,
local_irq_restore(flags);
}
/*
* XXX This need fixing based on page size. It's only used by
* native_hpte_clear() for now which needs fixing too so they
* make a good pair...
*/
static unsigned long slot2va(unsigned long hpte_v, unsigned long slot)
#define LP_SHIFT 12
#define LP_BITS 8
#define LP_MASK(i) ((0xFF >> (i)) << LP_SHIFT)
static void hpte_decode(hpte_t *hpte, unsigned long slot,
int *psize, unsigned long *va)
{
unsigned long avpn = HPTE_V_AVPN_VAL(hpte_v);
unsigned long va;
unsigned long hpte_r = hpte->r;
unsigned long hpte_v = hpte->v;
unsigned long avpn;
int i, size, shift, penc, avpnm_bits;
va = avpn << 23;
if (!(hpte_v & HPTE_V_LARGE))
size = MMU_PAGE_4K;
else {
for (i = 0; i < LP_BITS; i++) {
if ((hpte_r & LP_MASK(i+1)) == LP_MASK(i+1))
break;
}
penc = LP_MASK(i+1) >> LP_SHIFT;
for (size = 0; size < MMU_PAGE_COUNT; size++) {
if (! (hpte_v & HPTE_V_LARGE)) {
unsigned long vpi, pteg;
/* 4K pages are not represented by LP */
if (size == MMU_PAGE_4K)
continue;
pteg = slot / HPTES_PER_GROUP;
if (hpte_v & HPTE_V_SECONDARY)
pteg = ~pteg;
/* valid entries have a shift value */
if (!mmu_psize_defs[size].shift)
continue;
vpi = ((va >> 28) ^ pteg) & htab_hash_mask;
va |= vpi << PAGE_SHIFT;
if (penc == mmu_psize_defs[size].penc)
break;
}
}
return va;
/*
* FIXME, the code below works for 16M, 64K, and 4K pages as these
* fall under the p<=23 rules for calculating the virtual address.
* In the case of 16M pages, an extra bit is stolen from the AVPN
* field to achieve the requisite 24 bits.
*
* Does not work for 16G pages or 1 TB segments.
*/
shift = mmu_psize_defs[size].shift;
if (mmu_psize_defs[size].avpnm)
avpnm_bits = __ilog2_u64(mmu_psize_defs[size].avpnm) + 1;
else
avpnm_bits = 0;
if (shift - avpnm_bits <= 23) {
avpn = HPTE_V_AVPN_VAL(hpte_v) << 23;
if (shift < 23) {
unsigned long vpi, pteg;
pteg = slot / HPTES_PER_GROUP;
if (hpte_v & HPTE_V_SECONDARY)
pteg = ~pteg;
vpi = ((avpn >> 28) ^ pteg) & htab_hash_mask;
avpn |= (vpi << mmu_psize_defs[size].shift);
}
}
*va = avpn;
*psize = size;
}
/*
@ -374,15 +414,14 @@ static unsigned long slot2va(unsigned long hpte_v, unsigned long slot)
*
* TODO: add batching support when enabled. remember, no dynamic memory here,
* athough there is the control page available...
*
* XXX FIXME: 4k only for now !
*/
static void native_hpte_clear(void)
{
unsigned long slot, slots, flags;
hpte_t *hptep = htab_address;
unsigned long hpte_v;
unsigned long hpte_v, va;
unsigned long pteg_count;
int psize;
pteg_count = htab_hash_mask + 1;
@ -408,8 +447,9 @@ static void native_hpte_clear(void)
* already hold the native_tlbie_lock.
*/
if (hpte_v & HPTE_V_VALID) {
hpte_decode(hptep, slot, &psize, &va);
hptep->v = 0;
__tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K);
__tlbie(va, psize);
}
}

View file

@ -103,7 +103,7 @@ int mmu_ci_restrictions;
#ifdef CONFIG_DEBUG_PAGEALLOC
static u8 *linear_map_hash_slots;
static unsigned long linear_map_hash_count;
static spinlock_t linear_map_hash_lock;
static DEFINE_SPINLOCK(linear_map_hash_lock);
#endif /* CONFIG_DEBUG_PAGEALLOC */
/* There are definitions of page sizes arrays to be used when none

View file

@ -80,7 +80,6 @@ int page_is_ram(unsigned long pfn)
return 0;
#endif
}
EXPORT_SYMBOL(page_is_ram);
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)

View file

@ -40,7 +40,8 @@ extern int __map_without_bats;
extern unsigned long ioremap_base;
extern unsigned int rtas_data, rtas_size;
extern PTE *Hash, *Hash_end;
struct _PTE;
extern struct _PTE *Hash, *Hash_end;
extern unsigned long Hash_size, Hash_mask;
extern unsigned int num_tlbcam_entries;

View file

@ -261,7 +261,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
int err = -ENOMEM;
/* Use upper 10 bits of VA to index the first level map */
pd = pmd_offset(pgd_offset_k(va), va);
pd = pmd_offset(pud_offset(pgd_offset_k(va), va), va);
/* Use middle 10 bits of VA to index the second-level map */
pg = pte_alloc_kernel(pd, va);
if (pg != 0) {
@ -354,23 +354,27 @@ int
get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
int retval = 0;
pgd = pgd_offset(mm, addr & PAGE_MASK);
if (pgd) {
pmd = pmd_offset(pgd, addr & PAGE_MASK);
if (pmd_present(*pmd)) {
pte = pte_offset_map(pmd, addr & PAGE_MASK);
if (pte) {
retval = 1;
*ptep = pte;
if (pmdp)
*pmdp = pmd;
/* XXX caller needs to do pte_unmap, yuck */
}
}
pud = pud_offset(pgd, addr & PAGE_MASK);
if (pud && pud_present(*pud)) {
pmd = pmd_offset(pud, addr & PAGE_MASK);
if (pmd_present(*pmd)) {
pte = pte_offset_map(pmd, addr & PAGE_MASK);
if (pte) {
retval = 1;
*ptep = pte;
if (pmdp)
*pmdp = pmd;
/* XXX caller needs to do pte_unmap, yuck */
}
}
}
}
return(retval);
}

View file

@ -227,7 +227,7 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm)
* the first (bolted) segment, so that do_stab_bolted won't get a
* recursive segment miss on the segment table itself.
*/
void stabs_alloc(void)
void __init stabs_alloc(void)
{
int cpu;

View file

@ -0,0 +1,8 @@
#ifndef __POWERPC_PLATFORMS_44X_44X_H
#define __POWERPC_PLATFORMS_44X_44X_H
extern u8 as1_readb(volatile u8 __iomem *addr);
extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
extern void ppc44x_reset_system(char *cmd);
#endif /* __POWERPC_PLATFORMS_44X_44X_H */

View file

@ -0,0 +1,56 @@
#config BAMBOO
# bool "Bamboo"
# depends on 44x
# default n
# select 440EP
# help
# This option enables support for the IBM PPC440EP evaluation board.
config EBONY
bool "Ebony"
depends on 44x
default y
select 440GP
help
This option enables support for the IBM PPC440GP evaluation board.
#config LUAN
# bool "Luan"
# depends on 44x
# default n
# select 440SP
# help
# This option enables support for the IBM PPC440SP evaluation board.
#config OCOTEA
# bool "Ocotea"
# depends on 44x
# default n
# select 440GX
# help
# This option enables support for the IBM PPC440GX evaluation board.
# 44x specific CPU modules, selected based on the board above.
config 440EP
bool
select PPC_FPU
select IBM440EP_ERR42
config 440GP
bool
select IBM_NEW_EMAC_ZMII
config 440GX
bool
config 440SP
bool
config 440A
bool
depends on 440GX
default y
# 44x errata/workaround config symbols, selected by the CPU models above
config IBM440EP_ERR42
bool

View file

@ -0,0 +1,2 @@
obj-$(CONFIG_44x) := misc_44x.o
obj-$(CONFIG_EBONY) += ebony.o

View file

@ -0,0 +1,73 @@
/*
* Ebony board specific routines
*
* Matt Porter <mporter@kernel.crashing.org>
* Copyright 2002-2005 MontaVista Software Inc.
*
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003-2005 Zultys Technologies
*
* Rewritten and ported to the merged powerpc tree:
* Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/of_platform.h>
#include "44x.h"
static struct of_device_id ebony_of_bus[] = {
{ .type = "ibm,plb", },
{ .type = "ibm,opb", },
{ .type = "ibm,ebc", },
{},
};
static int __init ebony_device_probe(void)
{
if (!machine_is(ebony))
return 0;
of_platform_bus_probe(NULL, ebony_of_bus, NULL);
return 0;
}
device_initcall(ebony_device_probe);
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init ebony_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(root, "ibm,ebony"))
return 0;
return 1;
}
static void __init ebony_setup_arch(void)
{
}
define_machine(ebony) {
.name = "Ebony",
.probe = ebony_probe,
.setup_arch = ebony_setup_arch,
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc44x_reset_system,
.calibrate_decr = generic_calibrate_decr,
};

View file

@ -0,0 +1,57 @@
/*
* This file contains miscellaneous low-level functions for PPC 44x.
* Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <asm/reg.h>
#include <asm/ppc_asm.h>
.text
/*
* Do an IO access in AS1
*/
_GLOBAL(as1_readb)
mfmsr r7
ori r0,r7,MSR_DS
sync
mtmsr r0
sync
isync
lbz r3,0(r3)
sync
mtmsr r7
sync
isync
blr
_GLOBAL(as1_writeb)
mfmsr r7
ori r0,r7,MSR_DS
sync
mtmsr r0
sync
isync
stb r3,0(r4)
sync
mtmsr r7
sync
isync
blr
/*
* void ppc44x_reset_system(char *cmd)
*
* At present, this routine just applies a system reset.
*/
_GLOBAL(ppc44x_reset_system)
mfspr r13,SPRN_DBCR0
oris r13,r13,DBCR0_RST_SYSTEM@h
mtspr SPRN_DBCR0,r13
b . /* Just in case the reset doesn't work */

View file

@ -1,5 +1,6 @@
config PPC_MPC52xx
bool
select FSL_SOC
default n
config PPC_MPC5200

View file

@ -8,3 +8,5 @@ endif
obj-$(CONFIG_PPC_EFIKA) += efika.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
obj-$(CONFIG_PM) += mpc52xx_sleep.o mpc52xx_pm.o

View file

@ -184,6 +184,16 @@ static void efika_show_cpuinfo(struct seq_file *m)
of_node_put(root);
}
#ifdef CONFIG_PM
static void efika_suspend_prepare(void __iomem *mbar)
{
u8 pin = 4; /* GPIO_WKUP_4 (GPIO_PSC6_0 - IRDA_RX) */
u8 level = 1; /* wakeup on high level */
/* IOW. to wake it up, short pins 1 and 3 on IRDA connector */
mpc52xx_set_wakeup_gpio(pin, level);
}
#endif
static void __init efika_setup_arch(void)
{
rtas_initialize();
@ -199,6 +209,11 @@ static void __init efika_setup_arch(void)
efika_pcisetup();
#ifdef CONFIG_PM
mpc52xx_suspend.board_suspend_prepare = efika_suspend_prepare;
mpc52xx_pm_init();
#endif
if (ppc_md.progress)
ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0);
}

View file

@ -85,6 +85,28 @@ error:
iounmap(gpio);
}
#ifdef CONFIG_PM
static u32 descr_a;
static void lite5200_suspend_prepare(void __iomem *mbar)
{
u8 pin = 1; /* GPIO_WKUP_1 (GPIO_PSC2_4) */
u8 level = 0; /* wakeup on low level */
mpc52xx_set_wakeup_gpio(pin, level);
/*
* power down usb port
* this needs to be called before of-ohci suspend code
*/
descr_a = in_be32(mbar + 0x1048);
out_be32(mbar + 0x1048, (descr_a & ~0x200) | 0x100);
}
static void lite5200_resume_finish(void __iomem *mbar)
{
out_be32(mbar + 0x1048, descr_a);
}
#endif
static void __init lite5200_setup_arch(void)
{
struct device_node *np;
@ -107,6 +129,12 @@ static void __init lite5200_setup_arch(void)
mpc52xx_setup_cpu(); /* Generic */
lite5200_setup_cpu(); /* Platorm specific */
#ifdef CONFIG_PM
mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare;
mpc52xx_suspend.board_resume_finish = lite5200_resume_finish;
mpc52xx_pm_init();
#endif
#ifdef CONFIG_PCI
np = of_find_node_by_type(NULL, "pci");
if (np) {

View file

@ -0,0 +1,191 @@
#include <linux/init.h>
#include <linux/pm.h>
#include <linux/io.h>
#include <asm/time.h>
#include <asm/cacheflush.h>
#include <asm/mpc52xx.h>
#include "mpc52xx_pic.h"
/* these are defined in mpc52xx_sleep.S, and only used here */
extern void mpc52xx_deep_sleep(void *sram, void *sdram_regs,
struct mpc52xx_cdm *, struct mpc52xx_intr *);
extern void mpc52xx_ds_sram(void);
extern const long mpc52xx_ds_sram_size;
extern void mpc52xx_ds_cached(void);
extern const long mpc52xx_ds_cached_size;
static void __iomem *mbar;
static void __iomem *sdram;
static struct mpc52xx_cdm __iomem *cdm;
static struct mpc52xx_intr __iomem *intr;
static struct mpc52xx_gpio_wkup __iomem *gpiow;
static void *sram;
static int sram_size;
struct mpc52xx_suspend mpc52xx_suspend;
static int mpc52xx_pm_valid(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_STANDBY:
return 1;
default:
return 0;
}
}
int mpc52xx_set_wakeup_gpio(u8 pin, u8 level)
{
u16 tmp;
/* enable gpio */
out_8(&gpiow->wkup_gpioe, in_8(&gpiow->wkup_gpioe) | (1 << pin));
/* set as input */
out_8(&gpiow->wkup_ddr, in_8(&gpiow->wkup_ddr) & ~(1 << pin));
/* enable deep sleep interrupt */
out_8(&gpiow->wkup_inten, in_8(&gpiow->wkup_inten) | (1 << pin));
/* low/high level creates wakeup interrupt */
tmp = in_be16(&gpiow->wkup_itype);
tmp &= ~(0x3 << (pin * 2));
tmp |= (!level + 1) << (pin * 2);
out_be16(&gpiow->wkup_itype, tmp);
/* master enable */
out_8(&gpiow->wkup_maste, 1);
return 0;
}
int mpc52xx_pm_prepare(suspend_state_t state)
{
if (state != PM_SUSPEND_STANDBY)
return -EINVAL;
/* map the whole register space */
mbar = mpc52xx_find_and_map("mpc5200");
if (!mbar) {
printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__);
return -ENOSYS;
}
/* these offsets are from mpc5200 users manual */
sdram = mbar + 0x100;
cdm = mbar + 0x200;
intr = mbar + 0x500;
gpiow = mbar + 0xc00;
sram = mbar + 0x8000; /* Those will be handled by the */
sram_size = 0x4000; /* bestcomm driver soon */
/* call board suspend code, if applicable */
if (mpc52xx_suspend.board_suspend_prepare)
mpc52xx_suspend.board_suspend_prepare(mbar);
else {
printk(KERN_ALERT "%s: %i don't know how to wake up the board\n",
__func__, __LINE__);
goto out_unmap;
}
return 0;
out_unmap:
iounmap(mbar);
return -ENOSYS;
}
char saved_sram[0x4000];
int mpc52xx_pm_enter(suspend_state_t state)
{
u32 clk_enables;
u32 msr, hid0;
u32 intr_main_mask;
void __iomem * irq_0x500 = (void *)CONFIG_KERNEL_START + 0x500;
unsigned long irq_0x500_stop = (unsigned long)irq_0x500 + mpc52xx_ds_cached_size;
char saved_0x500[mpc52xx_ds_cached_size];
/* disable all interrupts in PIC */
intr_main_mask = in_be32(&intr->main_mask);
out_be32(&intr->main_mask, intr_main_mask | 0x1ffff);
/* don't let DEC expire any time soon */
mtspr(SPRN_DEC, 0x7fffffff);
/* save SRAM */
memcpy(saved_sram, sram, sram_size);
/* copy low level suspend code to sram */
memcpy(sram, mpc52xx_ds_sram, mpc52xx_ds_sram_size);
out_8(&cdm->ccs_sleep_enable, 1);
out_8(&cdm->osc_sleep_enable, 1);
out_8(&cdm->ccs_qreq_test, 1);
/* disable all but SDRAM and bestcomm (SRAM) clocks */
clk_enables = in_be32(&cdm->clk_enables);
out_be32(&cdm->clk_enables, clk_enables & 0x00088000);
/* disable power management */
msr = mfmsr();
mtmsr(msr & ~MSR_POW);
/* enable sleep mode, disable others */
hid0 = mfspr(SPRN_HID0);
mtspr(SPRN_HID0, (hid0 & ~(HID0_DOZE | HID0_NAP | HID0_DPM)) | HID0_SLEEP);
/* save original, copy our irq handler, flush from dcache and invalidate icache */
memcpy(saved_0x500, irq_0x500, mpc52xx_ds_cached_size);
memcpy(irq_0x500, mpc52xx_ds_cached, mpc52xx_ds_cached_size);
flush_icache_range((unsigned long)irq_0x500, irq_0x500_stop);
/* call low-level sleep code */
mpc52xx_deep_sleep(sram, sdram, cdm, intr);
/* restore original irq handler */
memcpy(irq_0x500, saved_0x500, mpc52xx_ds_cached_size);
flush_icache_range((unsigned long)irq_0x500, irq_0x500_stop);
/* restore old power mode */
mtmsr(msr & ~MSR_POW);
mtspr(SPRN_HID0, hid0);
mtmsr(msr);
out_be32(&cdm->clk_enables, clk_enables);
out_8(&cdm->ccs_sleep_enable, 0);
out_8(&cdm->osc_sleep_enable, 0);
/* restore SRAM */
memcpy(sram, saved_sram, sram_size);
/* restart jiffies */
wakeup_decrementer();
/* reenable interrupts in PIC */
out_be32(&intr->main_mask, intr_main_mask);
return 0;
}
int mpc52xx_pm_finish(suspend_state_t state)
{
/* call board resume code */
if (mpc52xx_suspend.board_resume_finish)
mpc52xx_suspend.board_resume_finish(mbar);
iounmap(mbar);
return 0;
}
static struct pm_ops mpc52xx_pm_ops = {
.valid = mpc52xx_pm_valid,
.prepare = mpc52xx_pm_prepare,
.enter = mpc52xx_pm_enter,
.finish = mpc52xx_pm_finish,
};
int __init mpc52xx_pm_init(void)
{
pm_set_ops(&mpc52xx_pm_ops);
return 0;
}

View file

@ -0,0 +1,154 @@
#include <asm/reg.h>
#include <asm/ppc_asm.h>
#include <asm/processor.h>
.text
_GLOBAL(mpc52xx_deep_sleep)
mpc52xx_deep_sleep: /* args r3-r6: SRAM, SDRAM regs, CDM regs, INTR regs */
/* enable interrupts */
mfmsr r7
ori r7, r7, 0x8000 /* EE */
mtmsr r7
sync; isync;
li r10, 0 /* flag that irq handler sets */
/* enable tmr7 (or any other) interrupt */
lwz r8, 0x14(r6) /* intr->main_mask */
ori r8, r8, 0x1
xori r8, r8, 0x1
stw r8, 0x14(r6)
sync
/* emulate tmr7 interrupt */
li r8, 0x1
stw r8, 0x40(r6) /* intr->main_emulate */
sync
/* wait for it to happen */
1:
cmpi cr0, r10, 1
bne cr0, 1b
/* lock icache */
mfspr r10, SPRN_HID0
ori r10, r10, 0x2000
sync; isync;
mtspr SPRN_HID0, r10
sync; isync;
mflr r9 /* save LR */
/* jump to sram */
mtlr r3
blrl
mtlr r9 /* restore LR */
/* unlock icache */
mfspr r10, SPRN_HID0
ori r10, r10, 0x2000
xori r10, r10, 0x2000
sync; isync;
mtspr SPRN_HID0, r10
sync; isync;
/* return to C code */
blr
_GLOBAL(mpc52xx_ds_sram)
mpc52xx_ds_sram:
/* put SDRAM into self-refresh */
lwz r8, 0x4(r4) /* sdram->ctrl */
oris r8, r8, 0x8000 /* mode_en */
stw r8, 0x4(r4)
sync
ori r8, r8, 0x0002 /* soft_pre */
stw r8, 0x4(r4)
sync
xori r8, r8, 0x0002
xoris r8, r8, 0x8000 /* !mode_en */
stw r8, 0x4(r4)
sync
oris r8, r8, 0x5000
xoris r8, r8, 0x4000 /* ref_en !cke */
stw r8, 0x4(r4)
sync
/* disable SDRAM clock */
lwz r8, 0x14(r5) /* cdm->clkenable */
ori r8, r8, 0x0008
xori r8, r8, 0x0008
stw r8, 0x14(r5)
sync
/* put mpc5200 to sleep */
mfmsr r10
oris r10, r10, 0x0004 /* POW = 1 */
sync; isync;
mtmsr r10
sync; isync;
/* enable clock */
lwz r8, 0x14(r5)
ori r8, r8, 0x0008
stw r8, 0x14(r5)
sync
/* get ram out of self-refresh */
lwz r8, 0x4(r4)
oris r8, r8, 0x5000 /* cke ref_en */
stw r8, 0x4(r4)
sync
blr
_GLOBAL(mpc52xx_ds_sram_size)
mpc52xx_ds_sram_size:
.long $-mpc52xx_ds_sram
/* ### interrupt handler for wakeup from deep-sleep ### */
_GLOBAL(mpc52xx_ds_cached)
mpc52xx_ds_cached:
mtspr SPRN_SPRG0, r7
mtspr SPRN_SPRG1, r8
/* disable emulated interrupt */
mfspr r7, 311 /* MBAR */
addi r7, r7, 0x540 /* intr->main_emul */
li r8, 0
stw r8, 0(r7)
sync
dcbf 0, r7
/* acknowledge wakeup, so CCS releases power pown */
mfspr r7, 311 /* MBAR */
addi r7, r7, 0x524 /* intr->enc_status */
lwz r8, 0(r7)
ori r8, r8, 0x0400
stw r8, 0(r7)
sync
dcbf 0, r7
/* flag - we handled the interrupt */
li r10, 1
mfspr r8, SPRN_SPRG1
mfspr r7, SPRN_SPRG0
rfi
_GLOBAL(mpc52xx_ds_cached_size)
mpc52xx_ds_cached_size:
.long $-mpc52xx_ds_cached

View file

@ -111,6 +111,7 @@ static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{ .type = "mdio", },
{},
};

View file

@ -73,6 +73,7 @@ static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{ .type = "mdio", },
{},
};

View file

@ -118,6 +118,7 @@ static struct of_device_id mpc836x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{ .type = "mdio", },
{},
};

View file

@ -84,7 +84,7 @@ void __init mpc8544_ds_pic_init(void)
#ifdef CONFIG_PPC_I8259
/* Initialize the i8259 controller */
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "chrp,iic")) {
if (of_device_is_compatible(np, "chrp,iic")) {
cascade_node = np;
break;
}

View file

@ -197,7 +197,7 @@ static void __init mpc85xx_cds_pic_init(void)
#ifdef CONFIG_PPC_I8259
/* Initialize the i8259 controller */
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "chrp,iic")) {
if (of_device_is_compatible(np, "chrp,iic")) {
cascade_node = np;
break;
}

View file

@ -147,6 +147,7 @@ static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{ .type = "mdio", },
{},
};

View file

@ -102,7 +102,7 @@ mpc86xx_hpcn_init_irq(void)
#ifdef CONFIG_PCI
/* Initialize i8259 controller */
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "chrp,iic")) {
if (of_device_is_compatible(np, "chrp,iic")) {
cascade_node = np;
break;
}

View file

@ -42,6 +42,7 @@ source "arch/powerpc/platforms/83xx/Kconfig"
source "arch/powerpc/platforms/85xx/Kconfig"
source "arch/powerpc/platforms/86xx/Kconfig"
source "arch/powerpc/platforms/embedded6xx/Kconfig"
source "arch/powerpc/platforms/44x/Kconfig"
#source "arch/powerpc/platforms/4xx/Kconfig
config PPC_NATIVE

View file

@ -6,7 +6,8 @@ obj-$(CONFIG_PPC_PMAC) += powermac/
endif
endif
obj-$(CONFIG_PPC_CHRP) += chrp/
obj-$(CONFIG_4xx) += 4xx/
#obj-$(CONFIG_4xx) += 4xx/
obj-$(CONFIG_44x) += 44x/
obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_8xx) += 8xx/
obj-$(CONFIG_PPC_82xx) += 82xx/

View file

@ -227,7 +227,7 @@ void iic_request_IPIs(void)
static int iic_host_match(struct irq_host *h, struct device_node *node)
{
return device_is_compatible(node,
return of_device_is_compatible(node,
"IBM,CBEA-Internal-Interrupt-Controller");
}
@ -256,7 +256,7 @@ static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
unsigned int node, ext, unit, class;
const u32 *val;
if (!device_is_compatible(ct,
if (!of_device_is_compatible(ct,
"IBM,CBEA-Internal-Interrupt-Controller"))
return -ENODEV;
if (intsize != 1)
@ -324,7 +324,7 @@ static int __init setup_iic(void)
for (dn = NULL;
(dn = of_find_node_by_name(dn,"interrupt-controller")) != NULL;) {
if (!device_is_compatible(dn,
if (!of_device_is_compatible(dn,
"IBM,CBEA-Internal-Interrupt-Controller"))
continue;
np = of_get_property(dn, "ibm,interrupt-server-ranges", NULL);

View file

@ -112,7 +112,7 @@ static void __init mpic_init_IRQ(void)
for (dn = NULL;
(dn = of_find_node_by_name(dn, "interrupt-controller"));) {
if (!device_is_compatible(dn, "CBEA,platform-open-pic"))
if (!of_device_is_compatible(dn, "CBEA,platform-open-pic"))
continue;
/* The MPIC driver will get everything it needs from the

View file

@ -358,12 +358,12 @@ void __init spider_init_IRQ(void)
*/
for (dn = NULL;
(dn = of_find_node_by_name(dn, "interrupt-controller"));) {
if (device_is_compatible(dn, "CBEA,platform-spider-pic")) {
if (of_device_is_compatible(dn, "CBEA,platform-spider-pic")) {
if (of_address_to_resource(dn, 0, &r)) {
printk(KERN_WARNING "spider-pic: Failed\n");
continue;
}
} else if (device_is_compatible(dn, "sti,platform-spider-pic")
} else if (of_device_is_compatible(dn, "sti,platform-spider-pic")
&& (chip < 2)) {
static long hard_coded_pics[] =
{ 0x24000008000ul, 0x34000008000ul};

View file

@ -267,7 +267,7 @@ chrp_find_bridges(void)
model = of_get_property(dev, "model", NULL);
if (model == NULL)
model = "<none>";
if (device_is_compatible(dev, "IBM,python")) {
if (of_device_is_compatible(dev, "IBM,python")) {
setup_python(hose, dev);
} else if (is_mot
|| strncmp(model, "Motorola, Grackle", 17) == 0) {

View file

@ -448,7 +448,7 @@ static void __init chrp_find_8259(void)
/* Look for cascade */
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "chrp,iic")) {
if (of_device_is_compatible(np, "chrp,iic")) {
pic = np;
break;
}

View file

@ -20,16 +20,24 @@ config MPC7448HPC2
select TSI108_BRIDGE
select DEFAULT_UIMAGE
select PPC_UDBG_16550
select MPIC
select MPIC_WEIRD
help
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
platform
config PPC_HOLLY
bool "PPC750GX/CL with TSI10x bridge (Hickory/Holly)"
select TSI108_BRIDGE
select PPC_UDBG_16550
help
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
Board with TSI108/9 bridge (Hickory/Holly)
endchoice
config TSI108_BRIDGE
bool
depends on MPC7448HPC2
depends on MPC7448HPC2 || PPC_HOLLY
select MPIC
select MPIC_WEIRD
default y
config MPC10X_BRIDGE

View file

@ -3,3 +3,4 @@
#
obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o
obj-$(CONFIG_PPC_HOLLY) += holly.o

View file

@ -0,0 +1,317 @@
/*
* Board setup routines for the IBM 750GX/CL platform w/ TSI10x bridge
*
* Copyright 2007 IBM Corporation
*
* Stephen Winiecki <stevewin@us.ibm.com>
* Josh Boyer <jwboyer@linux.vnet.ibm.com>
*
* Based on code from mpc7448_hpc2.c
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/tsi108.h>
#include <asm/pci-bridge.h>
#include <asm/reg.h>
#include <mm/mmu_decl.h>
#include <asm/tsi108_irq.h>
#include <asm/tsi108_pci.h>
#include <asm/mpic.h>
#include <asm/of_platform.h>
#undef DEBUG
#define HOLLY_PCI_CFG_PHYS 0x7c000000
int holly_exclude_device(u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
else
return PCIBIOS_SUCCESSFUL;
}
static void holly_remap_bridge(void)
{
u32 lut_val, lut_addr;
int i;
printk(KERN_INFO "Remapping PCI bridge\n");
/* Re-init the PCI bridge and LUT registers to have mappings that don't
* rely on PIBS
*/
lut_addr = 0x900;
for (i = 0; i < 31; i++) {
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000201);
lut_addr += 4;
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
lut_addr += 4;
}
/* Reserve the last LUT entry for PCI I/O space */
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000241);
lut_addr += 4;
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
/* Map PCI I/O space */
tsi108_write_reg(TSI108_PCI_PFAB_IO_UPPER, 0x0);
tsi108_write_reg(TSI108_PCI_PFAB_IO, 0x1);
/* Map PCI CFG space */
tsi108_write_reg(TSI108_PCI_PFAB_BAR0_UPPER, 0x0);
tsi108_write_reg(TSI108_PCI_PFAB_BAR0, 0x7c000000 | 0x01);
/* We don't need MEM32 and PRM remapping so disable them */
tsi108_write_reg(TSI108_PCI_PFAB_MEM32, 0x0);
tsi108_write_reg(TSI108_PCI_PFAB_PFM3, 0x0);
tsi108_write_reg(TSI108_PCI_PFAB_PFM4, 0x0);
/* Set P2O_BAR0 */
tsi108_write_reg(TSI108_PCI_P2O_BAR0_UPPER, 0x0);
tsi108_write_reg(TSI108_PCI_P2O_BAR0, 0xc0000000);
/* Init the PCI LUTs to do no remapping */
lut_addr = 0x500;
lut_val = 0x00000002;
for (i = 0; i < 32; i++) {
tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, lut_val);
lut_addr += 4;
tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, 0x40000000);
lut_addr += 4;
lut_val += 0x02000000;
}
tsi108_write_reg(TSI108_PCI_P2O_PAGE_SIZES, 0x00007900);
/* Set 64-bit PCI bus address for system memory */
tsi108_write_reg(TSI108_PCI_P2O_BAR2_UPPER, 0x0);
tsi108_write_reg(TSI108_PCI_P2O_BAR2, 0x0);
}
static void __init holly_setup_arch(void)
{
struct device_node *cpu;
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("holly_setup_arch():set_bridge", 0);
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu) {
const unsigned int *fp;
fp = of_get_property(cpu, "clock-frequency", NULL);
if (fp)
loops_per_jiffy = *fp / HZ;
else
loops_per_jiffy = 50000000 / HZ;
of_node_put(cpu);
}
tsi108_csr_vir_base = get_vir_csrbase();
/* setup PCI host bridge */
holly_remap_bridge();
np = of_find_node_by_type(NULL, "pci");
if (np)
tsi108_setup_pci(np, HOLLY_PCI_CFG_PHYS, 1);
ppc_md.pci_exclude_device = holly_exclude_device;
if (ppc_md.progress)
ppc_md.progress("tsi108: resources set", 0x100);
printk(KERN_INFO "PPC750GX/CL Platform\n");
}
/*
* Interrupt setup and service. Interrrupts on the holly come
* from the four external INT pins, PCI interrupts are routed via
* PCI interrupt control registers, it generates internal IRQ23
*
* Interrupt routing on the Holly Board:
* TSI108:PB_INT[0] -> CPU0:INT#
* TSI108:PB_INT[1] -> CPU0:MCP#
* TSI108:PB_INT[2] -> N/C
* TSI108:PB_INT[3] -> N/C
*/
static void __init holly_init_IRQ(void)
{
struct mpic *mpic;
phys_addr_t mpic_paddr = 0;
struct device_node *tsi_pic;
#ifdef CONFIG_PCI
unsigned int cascade_pci_irq;
struct device_node *tsi_pci;
struct device_node *cascade_node = NULL;
#endif
tsi_pic = of_find_node_by_type(NULL, "open-pic");
if (tsi_pic) {
unsigned int size;
const void *prop = of_get_property(tsi_pic, "reg", &size);
mpic_paddr = of_translate_address(tsi_pic, prop);
}
if (mpic_paddr == 0) {
printk(KERN_ERR "%s: No tsi108 PIC found !\n", __func__);
return;
}
pr_debug("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr);
mpic = mpic_alloc(tsi_pic, mpic_paddr,
MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
24,
NR_IRQS-4, /* num_sources used */
"Tsi108_PIC");
BUG_ON(mpic == NULL);
mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
mpic_init(mpic);
#ifdef CONFIG_PCI
tsi_pci = of_find_node_by_type(NULL, "pci");
if (tsi_pci == NULL) {
printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__);
return;
}
cascade_node = of_find_node_by_type(NULL, "pic-router");
if (cascade_node == NULL) {
printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__);
return;
}
cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
pr_debug("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq);
tsi108_pci_int_init(cascade_node);
set_irq_data(cascade_pci_irq, mpic);
set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
#endif
/* Configure MPIC outputs to CPU0 */
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
of_node_put(tsi_pic);
}
void holly_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "vendor\t\t: IBM\n");
seq_printf(m, "machine\t\t: PPC750 GX/CL\n");
}
void holly_restart(char *cmd)
{
__be32 __iomem *ocn_bar1 = NULL;
unsigned long bar;
struct device_node *bridge = NULL;
const void *prop;
int size;
phys_addr_t addr = 0xc0000000;
local_irq_disable();
bridge = of_find_node_by_type(NULL, "tsi-bridge");
if (bridge) {
prop = of_get_property(bridge, "reg", &size);
addr = of_translate_address(bridge, prop);
}
addr += (TSI108_PB_OFFSET + 0x414);
ocn_bar1 = ioremap(addr, 0x4);
/* Turn on the BOOT bit so the addresses are correctly
* routed to the HLP interface */
bar = ioread32be(ocn_bar1);
bar |= 2;
iowrite32be(bar, ocn_bar1);
iosync();
/* Set SRR0 to the reset vector and turn on MSR_IP */
mtspr(SPRN_SRR0, 0xfff00100);
mtspr(SPRN_SRR1, MSR_IP);
/* Do an rfi to jump back to firmware. Somewhat evil,
* but it works
*/
__asm__ __volatile__("rfi" : : : "memory");
/* Spin until reset happens. Shouldn't really get here */
for (;;) ;
}
void holly_power_off(void)
{
local_irq_disable();
/* No way to shut power off with software */
for (;;) ;
}
void holly_halt(void)
{
holly_power_off();
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init holly_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(root, "ibm,holly"))
return 0;
return 1;
}
static int ppc750_machine_check_exception(struct pt_regs *regs)
{
const struct exception_table_entry *entry;
/* Are we prepared to handle this fault */
if ((entry = search_exception_tables(regs->nip)) != NULL) {
tsi108_clear_pci_cfg_error();
regs->msr |= MSR_RI;
regs->nip = entry->fixup;
return 1;
}
return 0;
}
define_machine(holly){
.name = "PPC750 GX/CL TSI",
.probe = holly_probe,
.setup_arch = holly_setup_arch,
.init_IRQ = holly_init_IRQ,
.show_cpuinfo = holly_show_cpuinfo,
.get_irq = mpic_get_irq,
.restart = holly_restart,
.calibrate_decr = generic_calibrate_decr,
.machine_check_exception = ppc750_machine_check_exception,
.progress = udbg_progress,
};

View file

@ -41,6 +41,7 @@
#include <asm/reg.h>
#include <mm/mmu_decl.h>
#include "mpc7448_hpc2.h"
#include <asm/tsi108_pci.h>
#include <asm/tsi108_irq.h>
#include <asm/mpic.h>
@ -51,16 +52,15 @@
#define DBG(fmt...) do { } while(0)
#endif
#define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000
#ifndef CONFIG_PCI
isa_io_base = MPC7448_HPC2_ISA_IO_BASE;
isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE;
pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
#endif
extern int tsi108_setup_pci(struct device_node *dev);
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
extern void tsi108_pci_int_init(struct device_node *node);
extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
{
@ -72,28 +72,16 @@ int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
static void __init mpc7448_hpc2_setup_arch(void)
{
struct device_node *cpu;
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0);
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu != 0) {
const unsigned int *fp;
fp = of_get_property(cpu, "clock-frequency", NULL);
if (fp != 0)
loops_per_jiffy = *fp / HZ;
else
loops_per_jiffy = 50000000 / HZ;
of_node_put(cpu);
}
tsi108_csr_vir_base = get_vir_csrbase();
/* setup PCI host bridge */
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
tsi108_setup_pci(np);
tsi108_setup_pci(np, MPC7448HPC2_PCI_CFG_PHYS, 0);
ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device;
if (ppc_md.progress)
@ -222,7 +210,6 @@ static int __init mpc7448_hpc2_probe(void)
static int mpc7448_machine_check_exception(struct pt_regs *regs)
{
extern void tsi108_clear_pci_cfg_error(void);
const struct exception_table_entry *entry;
/* Are we prepared to handle this fault */

View file

@ -467,15 +467,15 @@ static int __init add_bridge(struct device_node *dev)
hose->last_busno = bus_range ? bus_range[1] : 0xff;
disp_name = NULL;
if (device_is_compatible(dev, "u3-agp")) {
if (of_device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
} else if (device_is_compatible(dev, "u3-ht")) {
} else if (of_device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
} else if (device_is_compatible(dev, "u4-pcie")) {
} else if (of_device_is_compatible(dev, "u4-pcie")) {
setup_u4_pcie(hose);
disp_name = "U4-PCIE";
primary = 0;
@ -556,12 +556,12 @@ void __init maple_pci_init(void)
continue;
if (strcmp(np->type, "pci") && strcmp(np->type, "ht"))
continue;
if ((device_is_compatible(np, "u4-pcie") ||
device_is_compatible(np, "u3-agp")) &&
if ((of_device_is_compatible(np, "u4-pcie") ||
of_device_is_compatible(np, "u3-agp")) &&
add_bridge(np) == 0)
of_node_get(np);
if (device_is_compatible(np, "u3-ht")) {
if (of_device_is_compatible(np, "u3-ht")) {
of_node_get(np);
ht = np;
}

View file

@ -231,7 +231,7 @@ static void __init maple_init_IRQ(void)
*/
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "open-pic")) {
if (of_device_is_compatible(np, "open-pic")) {
mpic_node = np;
break;
}

View file

@ -31,6 +31,7 @@
#include <asm/hw_irq.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/time.h>
#define SDCASR_REG 0x0100
#define SDCASR_REG_STRIDE 0x1000
@ -204,6 +205,8 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
policy->cur = pas_freqs[cur_astate].frequency;
policy->cpus = cpu_online_map;
ppc_proc_freq = policy->cur * 1000ul;
cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu);
/* this ensures that policy->cpuinfo_min and policy->cpuinfo_max
@ -270,6 +273,7 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy,
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
mutex_unlock(&pas_switch_mutex);
ppc_proc_freq = freqs.new * 1000ul;
return 0;
}

View file

@ -114,7 +114,7 @@ static __init void pas_init_IRQ(void)
mpic_node = NULL;
for_each_node_by_type(np, "interrupt-controller")
if (device_is_compatible(np, "open-pic")) {
if (of_device_is_compatible(np, "open-pic")) {
mpic_node = np;
break;
}
@ -211,7 +211,10 @@ static struct of_device_id pasemi_bus_ids[] = {
static int __init pasemi_publish_devices(void)
{
/* Publish OF platform devices for southbridge IOs */
if (!machine_is(pasemi))
return 0;
/* Publish OF platform devices for SDC and other non-PCI devices */
of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
return 0;

View file

@ -357,13 +357,13 @@ static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
if (policy->cpu != 0)
return -ENODEV;
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
policy->cpus = cpu_possible_map;
/* secondary CPUs are tied to the primary one by the
* cpufreq core if in the secondary policy we tell it that
* it actually must be one policy together with all others. */
policy->cpus = cpu_online_map;
cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
return cpufreq_frequency_table_cpuinfo(policy,

View file

@ -1418,7 +1418,7 @@ static long g5_eth_phy_reset(struct device_node *node, long param, long value)
phy = of_get_next_child(node, NULL);
if (!phy)
return -ENODEV;
need_reset = device_is_compatible(phy, "B5221");
need_reset = of_device_is_compatible(phy, "B5221");
of_node_put(phy);
if (!need_reset)
return 0;
@ -2624,7 +2624,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) {
if (!compat)
break;
if (device_is_compatible(node, compat))
if (of_device_is_compatible(node, compat))
break;
}
if (!node)
@ -2728,7 +2728,7 @@ initial_serial_shutdown(struct device_node *np)
conn = of_get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
port_type = PMAC_SCC_IRDA;
else if (device_is_compatible(np, "cobalt"))
else if (of_device_is_compatible(np, "cobalt"))
modem = 1;
else if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
@ -2787,7 +2787,7 @@ set_initial_features(void)
*/
np = of_find_node_by_name(NULL, "ethernet");
while(np) {
if (device_is_compatible(np, "K2-GMAC"))
if (of_device_is_compatible(np, "K2-GMAC"))
g5_gmac_enable(np, 0, 1);
np = of_find_node_by_name(np, "ethernet");
}
@ -2799,7 +2799,7 @@ set_initial_features(void)
*/
np = of_find_node_by_name(NULL, "firewire");
while(np) {
if (device_is_compatible(np, "pci106b,5811")) {
if (of_device_is_compatible(np, "pci106b,5811")) {
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
g5_fw_enable(np, 0, 1);
}
@ -2817,8 +2817,8 @@ set_initial_features(void)
np = of_find_node_by_name(NULL, "ethernet");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& device_is_compatible(np, "gmac"))
&& of_device_is_compatible(np->parent, "uni-north")
&& of_device_is_compatible(np, "gmac"))
core99_gmac_enable(np, 0, 1);
np = of_find_node_by_name(np, "ethernet");
}
@ -2831,10 +2831,10 @@ set_initial_features(void)
np = of_find_node_by_name(NULL, "firewire");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& (device_is_compatible(np, "pci106b,18") ||
device_is_compatible(np, "pci106b,30") ||
device_is_compatible(np, "pci11c1,5811"))) {
&& of_device_is_compatible(np->parent, "uni-north")
&& (of_device_is_compatible(np, "pci106b,18") ||
of_device_is_compatible(np, "pci106b,30") ||
of_device_is_compatible(np, "pci11c1,5811"))) {
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
core99_firewire_enable(np, 0, 1);
}
@ -2845,8 +2845,8 @@ set_initial_features(void)
np = of_find_node_by_name(NULL, "ata-6");
while(np) {
if (np->parent
&& device_is_compatible(np->parent, "uni-north")
&& device_is_compatible(np, "kauai-ata")) {
&& of_device_is_compatible(np->parent, "uni-north")
&& of_device_is_compatible(np, "kauai-ata")) {
core99_ata100_enable(np, 1);
}
np = of_find_node_by_name(np, "ata-6");

View file

@ -1207,7 +1207,7 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
if (strcmp(np->name, p->name))
continue;
if (p->compatible &&
!device_is_compatible(np, p->compatible))
!of_device_is_compatible(np, p->compatible))
continue;
if (p->quirks & pmac_i2c_quirk_skip)
break;

View file

@ -553,7 +553,7 @@ static int __init core99_nvram_setup(struct device_node *dp, unsigned long addr)
* identify the chip using flash id commands and base ourselves on
* a list of known chips IDs
*/
if (device_is_compatible(dp, "amd-0137")) {
if (of_device_is_compatible(dp, "amd-0137")) {
core99_erase_bank = amd_erase_bank;
core99_write_bank = amd_write_bank;
} else {
@ -588,7 +588,7 @@ int __init pmac_nvram_init(void)
}
}
is_core_99 = device_is_compatible(dp, "nvram,flash");
is_core_99 = of_device_is_compatible(dp, "nvram,flash");
if (is_core_99) {
err = core99_nvram_setup(dp, r1.start);
goto bail;

View file

@ -934,15 +934,15 @@ static int __init add_bridge(struct device_node *dev)
/* 64 bits only bridges */
#ifdef CONFIG_PPC64
if (device_is_compatible(dev, "u3-agp")) {
if (of_device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
} else if (device_is_compatible(dev, "u3-ht")) {
} else if (of_device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
} else if (device_is_compatible(dev, "u4-pcie")) {
} else if (of_device_is_compatible(dev, "u4-pcie")) {
setup_u4_pcie(hose);
disp_name = "U4-PCIE";
primary = 0;
@ -953,7 +953,7 @@ static int __init add_bridge(struct device_node *dev)
/* 32 bits only bridges */
#ifdef CONFIG_PPC32
if (device_is_compatible(dev, "uni-north")) {
if (of_device_is_compatible(dev, "uni-north")) {
primary = setup_uninorth(hose, &rsrc);
disp_name = "UniNorth";
} else if (strcmp(dev->name, "pci") == 0) {
@ -1129,21 +1129,21 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
return 0;
uninorth_child = node->parent &&
device_is_compatible(node->parent, "uni-north");
of_device_is_compatible(node->parent, "uni-north");
/* Firewire & GMAC were disabled after PCI probe, the driver is
* claiming them, we must re-enable them now.
*/
if (uninorth_child && !strcmp(node->name, "firewire") &&
(device_is_compatible(node, "pci106b,18") ||
device_is_compatible(node, "pci106b,30") ||
device_is_compatible(node, "pci11c1,5811"))) {
(of_device_is_compatible(node, "pci106b,18") ||
of_device_is_compatible(node, "pci106b,30") ||
of_device_is_compatible(node, "pci11c1,5811"))) {
pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1);
pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1);
updatecfg = 1;
}
if (uninorth_child && !strcmp(node->name, "ethernet") &&
device_is_compatible(node, "gmac")) {
of_device_is_compatible(node, "gmac")) {
pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1);
updatecfg = 1;
}
@ -1203,18 +1203,18 @@ void __init pmac_pcibios_after_init(void)
#endif /* CONFIG_BLK_DEV_IDE */
for_each_node_by_name(nd, "firewire") {
if (nd->parent && (device_is_compatible(nd, "pci106b,18") ||
device_is_compatible(nd, "pci106b,30") ||
device_is_compatible(nd, "pci11c1,5811"))
&& device_is_compatible(nd->parent, "uni-north")) {
if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") ||
of_device_is_compatible(nd, "pci106b,30") ||
of_device_is_compatible(nd, "pci11c1,5811"))
&& of_device_is_compatible(nd->parent, "uni-north")) {
pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0);
pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0);
}
}
of_node_put(nd);
for_each_node_by_name(nd, "ethernet") {
if (nd->parent && device_is_compatible(nd, "gmac")
&& device_is_compatible(nd->parent, "uni-north"))
if (nd->parent && of_device_is_compatible(nd, "gmac")
&& of_device_is_compatible(nd->parent, "uni-north"))
pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0);
}
of_node_put(nd);

View file

@ -364,7 +364,7 @@ static void __init pmac_pic_probe_oldstyle(void)
slave = of_find_node_by_name(master, "mac-io");
/* Check ordering of master & slave */
if (device_is_compatible(master, "gatwick")) {
if (of_device_is_compatible(master, "gatwick")) {
struct device_node *tmp;
BUG_ON(slave == NULL);
tmp = master;

Some files were not shown because too many files have changed in this diff Show more