spi-imx: strip down chipselect function to only drive the chipselect

spi_imx_chipselect() made things that should be (and mostly are) done by
spi_imx_setupxfer.  Only setting the tx and rx functions was missing.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Uwe Kleine-König 2009-10-01 15:44:33 -07:00 committed by Linus Torvalds
parent d1c627b59c
commit e6a0a8bfef

View file

@ -354,43 +354,14 @@ static int mx1_rx_available(struct spi_imx_data *spi_imx)
static void spi_imx_chipselect(struct spi_device *spi, int is_active)
{
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
unsigned int cs = 0;
int gpio = spi_imx->chipselect[spi->chip_select];
struct spi_imx_config config;
int active = is_active != BITBANG_CS_INACTIVE;
int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
if (spi->mode & SPI_CS_HIGH)
cs = 1;
if (is_active == BITBANG_CS_INACTIVE) {
if (gpio >= 0)
gpio_set_value(gpio, !cs);
if (gpio < 0)
return;
}
config.bpw = spi->bits_per_word;
config.speed_hz = spi->max_speed_hz;
config.mode = spi->mode;
config.cs = spi_imx->chipselect[spi->chip_select];
spi_imx->config(spi_imx, &config);
/* Initialize the functions for transfer */
if (config.bpw <= 8) {
spi_imx->rx = spi_imx_buf_rx_u8;
spi_imx->tx = spi_imx_buf_tx_u8;
} else if (config.bpw <= 16) {
spi_imx->rx = spi_imx_buf_rx_u16;
spi_imx->tx = spi_imx_buf_tx_u16;
} else if (config.bpw <= 32) {
spi_imx->rx = spi_imx_buf_rx_u32;
spi_imx->tx = spi_imx_buf_tx_u32;
} else
BUG();
if (gpio >= 0)
gpio_set_value(gpio, cs);
return;
gpio_set_value(gpio, dev_is_lowactive ^ active);
}
static void spi_imx_push(struct spi_imx_data *spi_imx)
@ -451,6 +422,19 @@ static int spi_imx_setupxfer(struct spi_device *spi,
if (!config.speed_hz)
config.speed_hz = spi->max_speed_hz;
/* Initialize the functions for transfer */
if (config.bpw <= 8) {
spi_imx->rx = spi_imx_buf_rx_u8;
spi_imx->tx = spi_imx_buf_tx_u8;
} else if (config.bpw <= 16) {
spi_imx->rx = spi_imx_buf_rx_u16;
spi_imx->tx = spi_imx_buf_tx_u16;
} else if (config.bpw <= 32) {
spi_imx->rx = spi_imx_buf_rx_u32;
spi_imx->tx = spi_imx_buf_tx_u32;
} else
BUG();
spi_imx->config(spi_imx, &config);
return 0;