Commit graph

493 commits

Author SHA1 Message Date
Steven Rostedt
4b3e3d2284 tracing: limit the number of loops the ring buffer self test can make
Impact: prevent deadlock if ring buffer gets corrupted

This patch adds a paranoid check to make sure the ring buffer consumer
does not go into an infinite loop. Since the ring buffer has been set
to read only, the consumer should not loop for more than the ring buffer
size. A check is added to make sure the consumer does not loop more than
the ring buffer size.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-18 22:50:01 -05:00
Steven Rostedt
4d7a077c0c tracing: have function trace select kallsyms
Impact: fix output of function tracer to be useful

The function tracer is pretty useless if KALLSYMS is not configured.
Unless you are good at reading hex values, the function tracer should
select the KALLSYMS configuration.

Also, the dynamic function tracer will fail its self test if KALLSYMS
is not selected.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-18 22:06:18 -05:00
Steven Rostedt
0c5119c1e6 tracing: disable tracing while testing ring buffer
Impact: fix to prevent hard lockup on self tests

If one of the tracers are broken and is constantly filling the ring
buffer while the test of the ring buffer is running, it will hang
the box. The reason is that the test is a consumer that will not
stop till the ring buffer is empty. But if the tracer is broken and
is constantly producing input to the buffer, this test will never
end. The result is a lockup of the box.

This happened when KALLSYMS was not defined and the dynamic ftrace
test constantly filled the ring buffer, because the filter failed
and all functions were being traced. Something was being called
that constantly filled the buffer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-18 22:04:01 -05:00
Frederic Weisbecker
5b058bcde9 tracing/function-graph-tracer: trace the idle tasks
When the function graph tracer is activated, it iterates over the task_list
to allocate a stack to store the return addresses.

But the per cpu idle tasks are not iterated by using
do_each_thread / while_each_thread.

So we have to iterate on them manually.

This fixes somes weirdness in the traces and many losses of traces.
Examples on two cpus:

 0)   Xorg-4287    |   2.906 us    |              }
 0)   Xorg-4287    |   3.965 us    |            }
 0)   Xorg-4287    |   5.302 us    |          }
 ------------------------------------------
 0)   Xorg-4287    =>    <idle>-0
 ------------------------------------------

 0)    <idle>-0    |   2.861 us    |                        }
 0)    <idle>-0    |   0.526 us    |                        set_normalized_timespec();
 0)    <idle>-0    |   7.201 us    |                      }
 0)    <idle>-0    |   8.214 us    |                    }
 0)    <idle>-0    |               |                    clockevents_program_event() {
 0)    <idle>-0    |               |                      lapic_next_event() {
 0)    <idle>-0    |   0.510 us    |                        native_apic_mem_write();
 0)    <idle>-0    |   1.546 us    |                      }
 0)    <idle>-0    |   2.583 us    |                    }
 0)    <idle>-0    | + 12.435 us   |                  }
 0)    <idle>-0    | + 13.470 us   |                }
 0)    <idle>-0    |   0.608 us    |                _spin_unlock_irqrestore();
 0)    <idle>-0    | + 23.270 us   |              }
 0)    <idle>-0    | + 24.336 us   |            }
 0)    <idle>-0    | + 25.417 us   |          }
 0)    <idle>-0    |   0.593 us    |          _spin_unlock();
 0)    <idle>-0    | + 41.869 us   |        }
 0)    <idle>-0    | + 42.906 us   |      }
 0)    <idle>-0    | + 95.035 us   |    }
 0)    <idle>-0    |   0.540 us    |    menu_reflect();
 0)    <idle>-0    | ! 100.404 us  |  }
 0)    <idle>-0    |   0.564 us    |  mce_idle_callback();
 0)    <idle>-0    |               |  enter_idle() {
 0)    <idle>-0    |   0.526 us    |    mce_idle_callback();
 0)    <idle>-0    |   1.757 us    |  }
 0)    <idle>-0    |               |  cpuidle_idle_call() {
 0)    <idle>-0    |               |    menu_select() {
 0)    <idle>-0    |   0.525 us    |      pm_qos_requirement();
 0)    <idle>-0    |   0.518 us    |      tick_nohz_get_sleep_length();
 0)    <idle>-0    |   2.621 us    |    }
[...]
 1)    <idle>-0    |   0.518 us    |              touch_softlockup_watchdog();
 1)    <idle>-0    | + 14.355 us   |            }
 1)    <idle>-0    | + 22.840 us   |          }
 1)    <idle>-0    | + 25.949 us   |        }
 1)    <idle>-0    |               |        handle_irq() {
 1)    <idle>-0    |   0.511 us    |          irq_to_desc();
 1)    <idle>-0    |               |          handle_edge_irq() {
 1)    <idle>-0    |   0.638 us    |            _spin_lock();
 1)    <idle>-0    |               |            ack_apic_edge() {
 1)    <idle>-0    |   0.510 us    |              irq_to_desc();
 1)    <idle>-0    |               |              move_native_irq() {
 1)    <idle>-0    |   0.510 us    |                irq_to_desc();
 1)    <idle>-0    |   1.532 us    |              }
 1)    <idle>-0    |   0.511 us    |              native_apic_mem_write();
 ------------------------------------------
 1)    <idle>-0    =>    cat-5073
 ------------------------------------------

 1)    cat-5073    |   3.731 us    |                    }
 1)    cat-5073    |               |                    run_local_timers() {
 1)    cat-5073    |   0.533 us    |                      hrtimer_run_queues();
 1)    cat-5073    |               |                      raise_softirq() {
 1)    cat-5073    |               |                        __raise_softirq_irqoff() {
 1)    cat-5073    |               |                          /* nr: 1 */
 1)    cat-5073    |   2.718 us    |                        }
 1)    cat-5073    |   3.814 us    |                      }

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 19:20:17 +01:00
Pekka Paalanen
6bc5c366b1 trace: mmiotrace to the tracer menu in Kconfig
Impact: cosmetic change in Kconfig menu layout

This patch was originally suggested by Peter Zijlstra, but seems it
was forgotten.

CONFIG_MMIOTRACE and CONFIG_MMIOTRACE_TEST were selectable
directly under the Kernel hacking / debugging menu in the kernel
configuration system. They were present only for x86 and x86_64.

Other tracers that use the ftrace tracing framework are in their own
sub-menu. This patch moves the mmiotrace configuration options there.
Since the Kconfig file, where the tracer menu is, is not architecture
specific, HAVE_MMIOTRACE_SUPPORT is introduced and provided only by
x86/x86_64. CONFIG_MMIOTRACE now depends on it.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15 20:03:28 +01:00
Pekka Paalanen
391b170f10 mmiotrace: count events lost due to not recording
Impact: enhances lost events counting in mmiotrace

The tracing framework, or the ring buffer facility it uses, has a switch
to stop recording data. When recording is off, the trace events will be
lost. The framework does not count these, so mmiotrace has to count them
itself.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15 20:02:42 +01:00
Oleg Nesterov
229c4ef8ae ftrace: do_each_pid_task() needs rcu lock
"ftrace: use struct pid" commit 978f3a45d9
converted ftrace_pid_trace to "struct pid*".

But we can't use do_each_pid_task() without rcu_read_lock() even if
we know the pid itself can't go away (it was pinned in ftrace_pid_write).
The exiting task can detach itself from this pid at any moment.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-03 22:50:58 +01:00
Steven Rostedt
91a8d07d82 ring-buffer: reset timestamps when ring buffer is reset
Impact: fix bad times of recent resets

The ring buffer needs to reset its timestamps when reseting of the
buffer, otherwise the timestamps are stale and might be used to
calculate times in the buffer causing funny timestamps to appear.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-22 10:31:58 +01:00
Steven Rostedt
1092307d58 trace: set max latency variable to zero on default
Impact: trace max latencies on start of latency tracing

This patch sets the max latency to zero whenever one of the
irq variant tracers or the wakeup tracer is set to current tracer.

Most developers expect to see output when starting up a latency
tracer. But since the max_latency is already set to max, and
it takes a latency greater than max_latency to be recorded, there
is no trace. This is not the expected behavior and has even confused
myself.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 15:21:30 +01:00
Steven Rostedt
a442e5e0a2 trace: stop all recording to ring buffer on ftrace_dump
Impact: limit ftrace dump output

Currently ftrace_dump only calls ftrace_kill that is a fast way
to prevent the function tracer functions from being called (just sets
a flag and clears the function to call, nothing else). It is better
to also turn off any recording to the ring buffers as well.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 15:21:30 +01:00
Steven Rostedt
faf6861ebd trace: print ftrace_dump at KERN_EMERG log level
Impact: fix to print out ftrace_dump when expected

I was debugging a hard race condition to only find out that
after I hit the race, my log level was not at level to show
KERN_INFO. The time it took to trigger the race was wasted because
I did not capture the trace.

Since ftrace_dump is only called from kernel oops (and only when
it is set in the kernel command line to do so), or when a
developer adds it to their own local tree, the log level of
the print should be at KERN_EMERG to make sure the print appears.

ftrace_dump is not called by a normal user setup, and will not
add extra unwanted print out to the console. There is no reason
it should be at KERN_INFO.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 15:21:30 +01:00
Lai Jiangshan
551b4048b3 ring_buffer: reset write when reserve buffer fail
Impact: reset struct buffer_page.write when interrupt storm

if struct buffer_page.write is not reset, any succedent committing
will corrupted ring_buffer:

static inline void
rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer)
{
	......
		cpu_buffer->commit_page->commit =
			cpu_buffer->commit_page->write;
	......
}

when "if (RB_WARN_ON(cpu_buffer, next_page == reader_page))", ring_buffer
is disabled, but some reserved buffers may haven't been committed.
we need reset struct buffer_page.write.

when "if (unlikely(next_page == cpu_buffer->commit_page))", ring_buffer
is still available, we should not corrupt it.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 15:21:30 +01:00
Frederic Weisbecker
00f57f545a tracing/function-graph-tracer: fix a regression while suspend to disk
Impact: fix a crash while kernel image restore

When the function graph tracer is running and while suspend to disk, some racy
and dangerous things happen against this tracer.

The current task will save its registers including the stack pointer which
contains the return address hooked by the tracer. But the current task will
continue to enter other functions after that to save the memory, and then
it will store other return addresses, and finally loose the old depth which
matches the return address saved in the old stack (during the registers saving).

So on image restore, the code will return to wrong addresses.
And there are other things: on restore, the task will have it's "current"
pointer overwritten during registers restoring....switching from one task to
another... That would be insane to try to trace function graphs at these
stages.

This patch makes the function graph tracer listening on power events, making
it's tracing disabled for the current task (the one that performs the
hibernation work) while suspend/resume to disk, making the tracing safe
during hibernation.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 15:21:30 +01:00
Steven Rostedt
082605de5f ring-buffer: fix alignment problem
Impact: fix to allow some archs to use the ring buffer

Commits in the ring buffer are checked by pointer arithmetic.
If the calculation is incorrect, then the commits will never take
place and the buffer will simply fill up and report an error.

Each page in the ring buffer has a small header:

struct buffer_data_page {
	u64		time_stamp;
	local_t		commit;
	unsigned char	data[];
};

Unfortuntely, some of the calculations used sizeof(struct buffer_data_page)
to know the size of the header. But this is incorrect on some archs,
where sizeof(struct buffer_data_page) does not equal
offsetof(struct buffer_data_page, data), and on those archs, the commits
are never processed.

This patch replaces the sizeof with offsetof.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20 13:09:06 +01:00
Linus Torvalds
4ce5f24193 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile: (31 commits)
  powerpc/oprofile: fix whitespaces in op_model_cell.c
  powerpc/oprofile: IBM CELL: add SPU event profiling support
  powerpc/oprofile: fix cell/pr_util.h
  powerpc/oprofile: IBM CELL: cleanup and restructuring
  oprofile: make new cpu buffer functions part of the api
  oprofile: remove #ifdef CONFIG_OPROFILE_IBS in non-ibs code
  ring_buffer: fix ring_buffer_event_length()
  oprofile: use new data sample format for ibs
  oprofile: add op_cpu_buffer_get_data()
  oprofile: add op_cpu_buffer_add_data()
  oprofile: rework implementation of cpu buffer events
  oprofile: modify op_cpu_buffer_read_entry()
  oprofile: add op_cpu_buffer_write_reserve()
  oprofile: rename variables in add_ibs_begin()
  oprofile: rename add_sample() in cpu_buffer.c
  oprofile: rename variable ibs_allowed to has_ibs in op_model_amd.c
  oprofile: making add_sample_entry() inline
  oprofile: remove backtrace code for ibs
  oprofile: remove unused ibs macro
  oprofile: remove unused components in struct oprofile_cpu_buffer
  ...
2009-01-09 12:43:06 -08:00
Robert Richter
465634adc1 ring_buffer: fix ring_buffer_event_length()
Function ring_buffer_event_length() provides an interface to detect
the length of data stored in an entry. However, the length contains
offsets depending on the internal usage. This makes it unusable. This
patch fixes this and now ring_buffer_event_length() returns the
alligned length that has been used in ring_buffer_lock_reserve().

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-01-07 22:47:40 +01:00
Rusty Russell
4462344ee9 cpumask: convert kernel trace functions further
Impact: Reduce future memory usage, use new cpumask API.

Since the last patch was created and acked, more old cpumask users
slipped into kernel/trace.

Mostly trivial conversions, except struct trace_iterator's "started"
member becomes a cpumask_var_t.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-01 10:12:23 +10:30
Rusty Russell
9e01c1b74c cpumask: convert kernel trace functions
Impact: Reduce future memory usage, use new cpumask API.

(Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS).

Convert kernel trace functions to use struct cpumask API:
1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu.
2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere.
3) Use on_each_cpu instead of playing with current->cpus_allowed.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 10:12:22 +10:30
Rusty Russell
2ca1a61583 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	arch/x86/kernel/io_apic.c
2008-12-31 23:05:57 +10:30
Huang Weiyi
1af237a099 tracing: removed duplicated #include
Removed duplicated #include in kernel/trace/trace.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-30 17:35:40 -08:00
Linus Torvalds
526ea064f9 Merge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  oprofile: select RING_BUFFER
  ring_buffer: adding EXPORT_SYMBOLs
  oprofile: fix lost sample counter
  oprofile: remove nr_available_slots()
  oprofile: port to the new ring_buffer
  ring_buffer: add remaining cpu functions to ring_buffer.h
  oprofile: moving cpu_buffer_reset() to cpu_buffer.h
  oprofile: adding cpu_buffer_entries()
  oprofile: adding cpu_buffer_write_commit()
  oprofile: adding cpu buffer r/w access functions
  ftrace: remove unused function arg in trace_iterator_increment()
  ring_buffer: update description for ring_buffer_alloc()
  oprofile: set values to default when creating oprofilefs
  oprofile: implement switch/case in buffer_sync.c
  x86/oprofile: cleanup IBS init/exit functions in op_model_amd.c
  x86/oprofile: reordering IBS code in op_model_amd.c
  oprofile: fix typo
  oprofile: whitspace changes only
  oprofile: update comment for oprofile_add_sample()
  oprofile: comment cleanup
2008-12-30 17:31:25 -08:00
Linus Torvalds
bb758e9637 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimers: fix warning in kernel/hrtimer.c
  x86: make sure we really have an hpet mapping before using it
  x86: enable HPET on Fujitsu u9200
  linux/timex.h: cleanup for userspace
  posix-timers: simplify de_thread()->exit_itimers() path
  posix-timers: check ->it_signal instead of ->it_pid to validate the timer
  posix-timers: use "struct pid*" instead of "struct task_struct*"
  nohz: suppress needless timer reprogramming
  clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI
  nohz: no softirq pending warnings for offline cpus
  hrtimer: removing all ur callback modes, fix
  hrtimer: removing all ur callback modes, fix hotplug
  hrtimer: removing all ur callback modes
  x86: correct link to HPET timer specification
  rtc-cmos: export second NVRAM bank

Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c
manually.
2008-12-30 16:16:21 -08:00
Rusty Russell
33edcf133b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-12-30 08:02:35 +10:30
Linus Torvalds
b0f4b285d7 Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (241 commits)
  sched, trace: update trace_sched_wakeup()
  tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3
  Revert "x86: disable X86_PTRACE_BTS"
  ring-buffer: prevent false positive warning
  ring-buffer: fix dangling commit race
  ftrace: enable format arguments checking
  x86, bts: memory accounting
  x86, bts: add fork and exit handling
  ftrace: introduce tracing_reset_online_cpus() helper
  tracing: fix warnings in kernel/trace/trace_sched_switch.c
  tracing: fix warning in kernel/trace/trace.c
  tracing/ring-buffer: remove unused ring_buffer size
  trace: fix task state printout
  ftrace: add not to regex on filtering functions
  trace: better use of stack_trace_enabled for boot up code
  trace: add a way to enable or disable the stack tracer
  x86: entry_64 - introduce FTRACE_ frame macro v2
  tracing/ftrace: add the printk-msg-only option
  tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()
  x86, bts: correctly report invalid bts records
  ...

Fixed up trivial conflict in scripts/recordmcount.pl due to SH bits
being already partly merged by the SH merge.
2008-12-28 12:21:10 -08:00
Ingo Molnar
32e8d18683 Merge branches 'timers/clocksource', 'timers/hpet', 'timers/hrtimers', 'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/rtc' into timers/core 2008-12-25 18:02:25 +01:00
Ingo Molnar
5250d329e3 Merge branches 'tracing/ftrace', 'tracing/hw-branch-tracing' and 'tracing/ring-buffer'; commit 'v2.6.28' into tracing/core 2008-12-25 13:11:00 +01:00
Peter Zijlstra
468a15bb4c sched, trace: update trace_sched_wakeup()
Impact: extend the wakeup tracepoint with the info whether the wakeup was real

Add the information needed to distinguish 'real' wakeups from 'false'
wakeups.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-25 13:10:21 +01:00
Steven Rostedt
98db8df777 ring-buffer: prevent false positive warning
Impact: eliminate false WARN_ON message

If an interrupt goes off after the setting of the local variable
tail_page and before incrementing the write index of that page,
the interrupt could push the commit forward to the next page.

Later a check is made to see if interrupts pushed the buffer around
the entire ring buffer by comparing the next page to the last commited
page. This can produce a false positive if the interrupt had pushed
the commit page forward as stated above.

Thanks to Jiaying Zhang for finding this race.

Reported-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-23 18:45:26 +01:00
Steven Rostedt
a8ccf1d6f6 ring-buffer: fix dangling commit race
Impact: fix stuck trace-buffers

If an interrupt comes in during the rb_set_commit_to_write and
pushes the tail page forward just at the right time, the commit
updates will miss the adding of the interrupt data. This will
cause the commit pointer to cease from moving forward.

Thanks to Jiaying Zhang for finding this race.

Reported-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-23 18:45:25 +01:00
Pekka J Enberg
213cc06079 ftrace: introduce tracing_reset_online_cpus() helper
Impact: cleanup

This patch factors out common code from multiple tracers into a
tracing_reset_online_cpus() function and converts the tracers to use it.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19 16:29:34 +01:00
Ingo Molnar
30cd324e97 Merge branches 'tracing/ftrace', 'tracing/ring-buffer' and 'tracing/urgent' into tracing/core
Conflicts:
	include/linux/ftrace.h
2008-12-19 09:42:40 +01:00
Ingo Molnar
c71dd42db2 tracing: fix warnings in kernel/trace/trace_sched_switch.c
these warnings:

  kernel/trace/trace_sched_switch.c: In function ‘tracing_sched_register’:
  kernel/trace/trace_sched_switch.c:96: warning: passing argument 1 of ‘register_trace_sched_wakeup_new’ from incompatible pointer type
  kernel/trace/trace_sched_switch.c:112: warning: passing argument 1 of ‘unregister_trace_sched_wakeup_new’ from incompatible pointer type
  kernel/trace/trace_sched_switch.c: In function ‘tracing_sched_unregister’:
  kernel/trace/trace_sched_switch.c:121: warning: passing argument 1 of ‘unregister_trace_sched_wakeup_new’ from incompatible pointer type

Trigger because sched_wakeup_new tracepoints need the same trace
signature as sched_wakeup - which was changed recently.

Fix it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19 01:05:38 +01:00
Ingo Molnar
3bddb9a324 tracing: fix warning in kernel/trace/trace.c
this warning:

  kernel/trace/trace.c: In function ‘print_lat_fmt’:
  kernel/trace/trace.c:1826: warning: unused variable ‘state’

Triggers because 'state' has become unused - remove it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19 01:01:25 +01:00
Lai Jiangshan
6d102bc68f tracing/ring-buffer: remove unused ring_buffer size
Impact: remove dead code

struct ring_buffer.size is not set after ring_buffer is initialized
or resized. it is always 0.

we can use "buffer->pages * PAGE_SIZE" to get ring_buffer's size

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 13:49:56 +01:00
Thomas Gleixner
3d9101e925 trace: fix task state printout
Impact: fix occasionally incorrect trace output

The tracing code has interesting varieties of printing out task state.

Unfortunalely only one of the instances is correct as it copies the
code from sched.c:sched_show_task(). The others are plain wrong as
they treatthe bitfield as an integer offset into the character
array. Also the size check of the character array is wrong as it
includes the trailing \0.

Use a common state decoder inline which does the Right Thing.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 13:03:09 +01:00
Steven Rostedt
ea3a6d6d60 ftrace: add not to regex on filtering functions
Impact: enhancement

Ingo Molnar has asked about a way to remove items from the filter
lists. Currently, you can only add or replace items. The way
items are added to the list is through opening one of the list
files (set_ftrace_filter or set_ftrace_notrace) via append.
If the file is opened for truncate, the list is cleared.

  echo spin_lock > /debug/tracing/set_ftrace_filter

The above will replace the list with only spin_lock

  echo spin_lock >> /debug/tracing/set_ftrace_filter

The above will add spin_lock to the list.

Now this patch adds:

  echo '!spin_lock' >> /debug/tracing/set_ftrace_filter

This will remove spin_lock from the list.

The limited glob features of these lists also can be notted.

  echo '!spin_*' >> /debug/tracing/set_ftrace_filter

This will remove all functions that start with 'spin_'

Note:

  echo '!spin_*' > /debug/tracing/set_ftrace_filter

will simply clear out the list (notice the '>' instead of '>>')

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 12:57:09 +01:00
Steven Rostedt
e05a43b744 trace: better use of stack_trace_enabled for boot up code
Impact: clean up

Andrew Morton suggested to use the stack_tracer_enabled variable
to decide whether or not to start stack tracing on bootup.
This lets us remove the start_stack_trace variable.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 12:56:56 +01:00
Steven Rostedt
f38f1d2aa5 trace: add a way to enable or disable the stack tracer
Impact: enhancement to stack tracer

The stack tracer currently is either on when configured in or
off when it is not. It can not be disabled when it is configured on.
(besides disabling the function tracer that it uses)

This patch adds a way to enable or disable the stack tracer at
run time. It defaults off on bootup, but a kernel parameter 'stacktrace'
has been added to enable it on bootup.

A new sysctl has been added "kernel.stack_tracer_enabled" to let
the user enable or disable the stack tracer at run time.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 12:56:24 +01:00
Frederic Weisbecker
66896a85cf tracing/ftrace: add the printk-msg-only option
Impact: display ftrace_printk messages "as is"

By default, ftrace_printk() messages find their output with some other
informations like pid, caller, ...
Sometimes a developer just want to have the ftrace_printk left "as is", without
other information.

This is done by providing a default-off option called printk-msg-only.
To enable it, just do `echo printk-msg-only > /debugfs/tracing/trace_options`

Before the patch:

           <...>-2739  [000]   145.692153: __might_sleep: I'm an ftrace_printk msg in __might_sleep
           <...>-2739  [000]   145.692155: __might_sleep: I'm another ftrace_printk msg in __might_sleep

After the patch and the printk-msg-only option enabled:

I'm an ftrace_printk msg in __might_sleep
I'm another ftrace_printk msg in __might_sleep

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-17 00:26:36 +01:00
Frederic Weisbecker
2c2d7329d8 tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()
Impact: prevent a trace recursion

After some tests with function graph tracer under x86-32, I saw some recursions
caused by ring_buffer_time_stamp() that calls preempt_enable_no_notrace() which
calls preempt_schedule() which is traced itself.

This patch re-enables preemption without rescheduling.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-17 00:26:35 +01:00
Ingo Molnar
9dfc3bc7d2 Merge branches 'tracing/fastboot', 'tracing/ftrace', 'tracing/function-graph-tracer' and 'tracing/hw-branch-tracing' into tracing/core 2008-12-16 12:03:38 +01:00
Rusty Russell
29c0177e6a cpumask: change cpumask_scnprintf, cpumask_parse_user, cpulist_parse, and cpulist_scnprintf to take pointers.
Impact: change calling convention of existing cpumask APIs

Most cpumask functions started with cpus_: these have been replaced by
cpumask_ ones which take struct cpumask pointers as expected.

These four functions don't have good replacement names; fortunately
they're rarely used, so we just change them over.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: paulus@samba.org
Cc: mingo@redhat.com
Cc: tony.luck@intel.com
Cc: ralf@linux-mips.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: cl@linux-foundation.org
Cc: srostedt@redhat.com
2008-12-13 21:20:25 +10:30
Frederic Weisbecker
f8b755ac8e tracing/function-graph-tracer: Output arrows signal on hardirq call/return
Impact: make more obvious the hardirq calls in the output

When a hardirq is triggered inside the codeflow on output, we have
now two arrows that indicate the entry and return of the hardirq.

 0)               |          bit_waitqueue() {
 0)   0.880 us    |            __phys_addr();
 0)   2.699 us    |          }
 0)               |          __wake_up_bit() {
 0)   ==========> |          smp_apic_timer_interrupt() {
 0)   0.797 us    |            native_apic_mem_write();
 0)   0.715 us    |            exit_idle();
 0)               |            irq_enter() {
 0)   0.722 us    |              idle_cpu();
 0)   5.519 us    |            }
 0)               |            hrtimer_interrupt() {
 0)               |              ktime_get() {
 0)               |                ktime_get_ts() {
 0)   0.805 us    |                  getnstimeofday();

 [...]

 0) ! 108.528 us  |            }
 0)               |            irq_exit() {
 0)               |              do_softirq() {
 0)               |                __do_softirq() {
 0)   0.895 us    |                  __local_bh_disable();
 0)               |                  run_timer_softirq() {
 0)   0.827 us    |                    hrtimer_run_pending();
 0)   1.226 us    |                    _spin_lock_irq();
 0)               |                    _spin_unlock_irq() {
 0)   6.550 us    |                  }
 0)   0.924 us    |                  _local_bh_enable();
 0) + 12.129 us   |                }
 0) + 13.911 us   |              }
 0)   0.707 us    |              idle_cpu();
 0) + 17.009 us   |            }
 0) ! 137.419 us  |          }
 0)   <========== |
 0)   1.045 us    |          }
 0) ! 148.908 us  |        }
 0) ! 151.022 us  |      }
 0) ! 153.022 us  |    }
 0)   0.963 us    |    journal_mark_dirty();
 0)   0.925 us    |    __brelse();

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 11:14:09 +01:00
Markus Metzger
a93751cab7 x86, bts, ftrace: adapt the hw-branch-tracer to the ds.c interface
Impact: restructure code, cleanup

Remove BTS bits from the hw-branch-tracer (renamed from bts-tracer) and
use the ds interface.

Signed-off-by: Markus Metzger <markut.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 08:08:14 +01:00
Robert Richter
c4f50183f9 ring_buffer: adding EXPORT_SYMBOLs
I added EXPORT_SYMBOL_GPLs for all functions part of the API
(ring_buffer.h). This is required since oprofile is using the ring
buffer and the compilation as modules would fail otherwise.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-12 06:54:55 +01:00
Robert Richter
e2ac8ef576 ftrace: remove unused function arg in trace_iterator_increment()
This removes the unused cpu function parameter.

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-12-10 14:20:12 +01:00
Robert Richter
68814b58c5 ring_buffer: update description for ring_buffer_alloc()
Trivial patch.

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-12-10 14:20:11 +01:00
Ingo Molnar
e726f5f91e tracing/function-graph-tracer: fix 'flags' variable mismatch
this warning:

 kernel/trace/trace.c: In function ‘trace_vprintk’:
 kernel/trace/trace.c:3626: warning: ‘flags’ may be used uninitialized in this function

shows some confusion about irq_flags / flags use here. We already have
irq_flags so remove the extra flags variable.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 16:55:53 +01:00
Frederic Weisbecker
380c4b1411 tracing/function-graph-tracer: append the tracing_graph_flag
Impact: Provide a way to pause the function graph tracer

As suggested by Steven Rostedt, the previous patch that prevented from
spinlock function tracing shouldn't use the raw_spinlock to fix it.
It's much better to follow lockdep with normal spinlock, so this patch
adds a new flag for each task to make the function graph tracer able
to be paused. We also can send an ftrace_printk whithout worrying of
the irrelevant traced spinlock during insertion.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 15:11:45 +01:00
Frederic Weisbecker
8e1b82e086 tracing/function-graph-tracer: turn tracing_selftest_running into an int
Impact: cleanup

Apply some suggestions of Steven Rostedt:

_turn tracing_selftest_running into a simple int (no need of an atomic_t)
_set it __read_mostly
_fix a comment style

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-08 15:11:44 +01:00