Because traffic between the local GATT client(s) and
remote servers are subject to different controls than
remote clients and the local server, all on the shared
fixed CID, it is important to manage the traffic on
seperate sockets.
Change-Id: I62385143c86522f4b123b32592b69f2a0ae6dc76
CRs-fixed: 336029
Signed-off-by: Brian Gix <bgix@codeaurora.org>
We only support a 23 octet MTU, so auto-respond to all
MTU change requests with the 23 octet response.
Change-Id: Ic69d5f068759d983f8cd98b329acbb9d3a481c49
CRs-fixed: 336025
Signed-off-by: Brian Gix <bgix@codeaurora.org>
When doing L2CAP configuration, use the correct retransmit and monitor
timeouts when configuring (or reconfiguring) AMP channels. The host
stack needs to use the timeouts read from incoming configuration
responses, and write appropriate timeouts when sending configuration
responses.
Change-Id: I1271ade93dbfee58a1cac115280704a327e901b2
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Added Flush Timeout parameter setting for l2cap channel. Bluetooth
profiles using l2cap can set this parameter to flush out the data
when it cannot be sent over the air with in timeout duration.
Change-Id: I60420c5be3a790aff26bc30e8089fdca47a99222
Signed-off-by: Srinivas Krovvidi <skrovvid@codeaurora.org>
Timer that was started at beginning of LE Pairing did not correctly
terminate pairing process when it fired, and was not properly cleaned
up on pairing completion.
Change-Id: Idf51bc8bf85cd6939d1d42fc16c7ee3071ab2420
Signed-off-by: Brian Gix <bgix@codeaurora.org>
Enabled ECB Block encoding for Low Energy pairing
Implemented missing components of MGMTOPS interface
Differentiated as needed between BR/EDR pairing and LE pairing
Change-Id: Ifb26a9c8ca0c57286fcee92e840835560930c093
Signed-off-by: Brian Gix <bgix@codeaurora.org>
Add send and receive of Extended Flow Spec option during L2CAP
lockstep configuration and passing the flow specs to HCI.
Change-Id: I3b229afb5c5e27fd5f36eb0e671c1d2739322c64
Signed-off-by: Peter Krystad <pkrystad@codeaurora.org>
When setting up an initial link over AMP, use "create channel" signals
to start the link rather than doing an initial connection over BR/EDR
and moving the channel to AMP.
Change-Id: I5ebef97d6214e5333f0d1475d90b6f66f89e2d87
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
BT 3.0 spec states MTU and MPS for A2MP fixed channel are to be
equal.
Change-Id: Iad068234c2f5393c96b2ae33d0b7b65e09683e36
Signed-off-by: Peter Krystad <pkrystad@codeaurora.org>
Changes made for BT 4.0 mean the A2MP CID must be set before
kernel_bind() and kernel_connect() are used to create the A2MP
kernel socket.
Change-Id: Ie0d471701f0f323bd589b1f92b3044ab91537ec8
Signed-off-by: Peter Krystad <pkrystad@codeaurora.org>
Two L2CAP timeouts constants were defined in units of milliseconds but
used as if they were jiffies. Change definition to jiffies.
Change-Id: Ia2837a62bff2a891956b70096c2a9a271060f212
Signed-off-by: Peter Krystad <pkrystad@codeaurora.org>
Discard any frames received while in the local busy state. This makes
the code less complex, and results in fewer retransmitted packets
when dealing with lost data.
Change-Id: Id06f923609df1c4e5f7c553355bb8db7794bbe2d
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
AMP controllers have different optimal settings for packet sizes
and checksums, so BT3.0+HS includes the ability to reconfigure
the L2CAP settings when a channel is moved between controllers.
Change-Id: Iad1592104ebc6ac4a9d9ed54b1d763b1786f4a1b
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Bluetooth 3.0+HS depends on an AMP manager to coordinate the setup and
teardown of AMP physical and logical links using the A2MP protocol.
There are also new L2CAP signals that allow two Bluetooth devices to
move L2CAP channels to and from a high-speed link, and a new socket
option for applications to use to control the type of Bluetooth link
used for L2CAP traffic.
Change-Id: I98067e0781b31f5d694e7b7da5cf5006dc21f514
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
The A2MP protocol uses a reliable ERTM channel to coordinate
high-speed AMP channels between two Bluetooth devices. This
is done using a fixed channel ID, but ERTM carries a lot of
state so the existing approach of hard-coded fixed channel
handlers does not work. This adds hooks for creation and
use of fixed channel sockets for use within the kernel.
Change-Id: I27363b7882ffc8ec643ffe792b078f253700089b
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Enhanced Retransmission Mode (ERTM) is a new feature in BT3.0, and
is a requirement for BT3.0+HS with high-speed AMP controllers.
Some work had already been done to add ERTM support to BlueZ,
but the high-speed feature is more demanding in terms of efficiency
and needs some extended control over ERTM operation. This commit
includes more robust state machines, no copying of received data,
improved transmit queue management, support for extended headers,
and more robust locking.
Change-Id: I21aba0e3fecb02e901bb174787a37533a923c327
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
This undoes all upstream bluetooth core changes since around
b79f44c (Bluetooth: Fix keeping the command timer running,
2011-04-11).
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The L2CAP timeout constants are always used in form of jiffies. So just
include the conversion from msecs in the define itself. This has the
advantage of making the code where the timeout is used more readable.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fixed channel mask needs to be stored to decide whether to
use A2MP for example. So far save only one relevant byte which
keeps all information we need.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Channel lock will be used to lock L2CAP channels which are locked
currently by socket locks.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use state_to_string function in debug statements.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
__cancel_delayed_work() is being used in some paths where we cannot
sleep waiting for the delayed work to finish. However, that function
might return while the timer is running and the work will be queued
again. Replace the calls with safer cancel_delayed_work() version
which spins until the timer handler finishes on other CPUs and
cancels the delayed work.
Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is usefull when need to make action after timer was cleared
depending on if it was running or not.
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
As reported by Dan Carpenter this function causes a Sparse warning and
shouldn't be declared inline:
include/net/bluetooth/l2cap.h:837:30 error: marked inline, but without a
definition"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
After moving L2CAP timers to workqueues l2cap_set_timer expects timeout
value to be specified in jiffies but constants defined in miliseconds
are used. This makes timeouts unreliable when CONFIG_HZ is not set to
1000.
__set_chan_timer macro still uses jiffies as input to avoid multiple
conversions from/to jiffies for sk_sndtimeo value which is already
specified in jiffies.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Ackec-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It makes more sense this way, since info_timer is a timer using delayed
work API.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
This one also needs to run in process context
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
(Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This move some checking code that was in l2cap_sock_connect() to
l2cap_chan_connect(). Thus we can invert the lock calls, i.e., call
lock_sock() before hci_dev_lock() to avoid a deadlock scenario.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Another step of remove interrupt context from Bluetooth Core.
Use the system workqueue.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
spin lock doesn't fit ok anymore on the new code based on workqueues.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
L2CAP timers also need to run in process context. As the works in l2cap
are small we are using the system worqueue.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
rename to l2cap_chan_check_security() to make it consistent with other
l2cap_exported functions. This function will be exported in a later
commit.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Symbolic fixed channel IDs will be used instead of magic numbers.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
AMP channel creation and channel moves are coordinated using the L2CAP
signaling channel. These definitions cover the "create channel",
"move channel", and "move channel confirm" signals.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Each channel has a policy to require BR/EDR (the default),
prefer BR/EDR, or prefer AMP.
Check for valid policy value and L2CAP mode.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
This variable is currently only accessible within l2cap_core.c, but
it is also needed in l2cap_sock.c
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
This implement priority based scheduler using skbuffer priority set via
SO_PRIORITY socket option.
It introduces hci_chan_hash (list of HCI Channel/hci_chan) per connection,
each item in this list refer to a L2CAP connection and it is used to
queue the data for transmission.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
This uses SO_PRIORITY to set the skbuffer priority field
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Timers set by __set_chan_timer() should use miliseconds instead of
jiffies. Commit 942ecc9c46 updated
l2cap_set_timer() so it expects timeout to be specified in msecs
instead of jiffies. This makes timeouts unreliable when CONFIG_HZ
is not set to 1000.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Adds support for extended sequence numbers found in
extended control fields.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
