HDMI core should not be powered down until the audio engine has
shutdown transmitting packets to the HDMI core. This change
increases the time for which the driver waits for the audio
engine to turn off.
CRs-Fixed: 412575
Change-Id: Ie11ab6c8140f7289f74da4877c9acf9b8cd4a838
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
DTV device should not be powered down until the audio engine has
shutdown. This change moves dtv audio off sequence to a separate
thread so that framebuffer close system call does not get blocked.
CRs-Fixed: 412575
Change-Id: I246a9e58f1367e653913773696510f375abf3d3a
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Implement Hot Plug Detect (HPD) software debouncing by
disabling the HPD interrupt until we finish processing
a previous HPD interrupt.
CRs-Fixed: 412575
Change-Id: Ia2c83f3446d09fe5bf6c6a1c4e6a9eb54ff465d6
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
For HDMI as primary case, we need to blackout the pipes
when they are unset so that any residue is not visible
on the DTV during suspend.
Change-Id: I2bf36f1002dd185c26fe6c4291977737daa73ae1
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
While changing the audio sampling rate, the older data in
the control register needs to cleaned before writing in
new data to avoid mixed or wrong data writing.
CRs-Fixed: 405772
Change-Id: I95d0807ea8cf544e4a0c8caed00de6cd60352efa
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Remove the kernel config parameter for HDCP since enabling or
disabling HDCP will now be controlled using a corresponding
module parameter.
Change-Id: Iae23b8fa66ca75d99423547e77f850f3c86615ee
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
This change removes the need to use HDCP feature flags in the
HDMI driver and adds the necessary support to configure HDCP
feature based on a module parameter.
Change-Id: Ie0eacc5b447230927cfdedfcb979c22d60e81981
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
This change adds a module parameter that can be used
to disable HDCP at runtime by specifying hdmi_msm.hdcp=0
on the fastboot command line.
Change-Id: Ifad5da9fcb86fb4ed663a5ef2bb14fe4dafd241e
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Currently, HPD(Hot Plug Detection, a module used for detecting
HDMI cable connection) soft debouncing logic implements around
1 sec mechanism to stabilize HPD event detection. In case of
fast HPD connect/disconnect, it is missing a real HPD event.
This change implements a new debouncing logic in driver which
will make sure the first real HPD event is correctly processed
and at the end of debouncing processing, if there is a change
in HPD state, the changed state is also processed. This way we
always process the change of HPD states.
CRs-Fixed: 384513
Change-Id: I02d9814e4a55b7eec11a8e0d134c9ed9b5747422
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
This change writes the checksum value to registers after
doing all the calculations so that the correct checksum
value is transmitted.
CRs-Fixed: 388272
Change-Id: Ia0543e458d5a11b148bd29e0d57ae355a051b2a9
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
At suspend, turn off mdp related clocks off if clocks
are not turned off by vsync disable request.
Change-Id: I0949b00b9ee0aee05b9b553ac7318b647052d94d
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit 780557dc178fc5511f4c03b4840791d27499a5f6)
After pipe_commit() released mutex and before kickoff happens,
There has possibility that dcs command may start transmitted.
This patch add dsi_mdp_busy flag to fix this race condition.
Change-Id: I0d9a81cd0719085c91c03386117261ad3bb6b182
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit c9427ced2ab4cf1094b61360a476305066044a54)
Add video mode dcs command list support. This patch
make sure dcs commands committed while dsi video engine
is busy so that dcs command will be transmitted at beginning
of next BLLP.
Change-Id: I11b0214ee10f3b1ef33b1da4c8e577800068cb06
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit 7b0e0a45216714d76bf717a928a0db77bfa2868a)
Both vsync enabled and disabled are controlled by framework
through ioctl. Driver reports vsync event to framework via
sysfs. Meanwhile, mdp related clocks are enabled by frame
work at vsync enabled request and disabled by driver if there
is no any display update within specifid vsync period.
Change-Id: Ice5be3a6db5930b95bdd2f718d9256bf73936e23
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit 3c406e4eec79b710b7f5b5b67c23db7af871be40)
Ensure that when backlight scaling ratio or backlight level is being
changed that the operation execute atomically. This prevents a backlight
level change from being overwritten when it interrupts a backlight scale
update.
CRs-Fixed: 404017
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
(cherry picked from commit ce328861aa1f4fa489e9abfc9d1e02b13af2ba47)
Signed-off-by: Dhivya Subramanian <dthiru@codeaurora.org>
(cherry picked from commit 0584596f75f8f2b184b8be1a0479ee61e449acba)
Change-Id: Ifb4bd5e823815b51dae38f1b8647b80d21b8ee45
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Filled length of the output buffer at FBD for videos
with frame height less than 96 was incorrect. With
this change, we get the proper filled length.
CRs-fixed: 395179
Signed-off-by: Deepak Verma <dverma@codeaurora.org>
(cherry picked from commit f01274b904a4899b13c64f35f2479a1080bfb2c4)
Change-Id: I88fdf915647d8a2123175599931fbdd4b7d1ddf0
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Video driver should free client context when an error
is encoutered.
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
(cherry picked from commit 9683019e54e8a8c38b6019b781a9cbdf41b84b29)
Change-Id: I9868afadb01cc63df8e09426a8dd112b08f2bd4e
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Added a check for non-zero virtual address.
Without this change, when ion_map_iommu returns a
zero virtual address, video core continuous ahead
without error check and later target reset happens
when trying to do a ion_unmap_iommu on the above fd,
which was never mapped.
Signed-off-by: Arun Menon <menon@codeaurora.org>
(cherry picked from commit 8688368ce3afbd1f3a80c7fa688c6a2f467247d3)
Change-Id: Ic6d86cc621e2f524dd19d1677646822cdc0f317c
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Change will handle codec config buffer with EOS.
Video driver will make sure that the codec config buffer with
EOS will be requeued in case of reconfig and non-reconfig paths.
CRs-fixed: 399347
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
(cherry picked from commit 43b203869814fe5f0ddcb265a8f859aebdaa652f)
Change-Id: Ib9a41fb842d2295804db86b2e03a62238c29984d
Signed-off-by: Dhivya Subramanian <dthiru@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
This change will ensure that video core clock is
set to 266Mhz on supported devices, else fallback
to 228Mhz.
Signed-off-by: Arun Menon <menon@codeaurora.org>
(cherry picked from commit 2cd6f1a77d845c162966b974b0e9dd4db0878020)
Change-Id: Ie9d28b218150f2e21fa95c4d4346251ddab3ee50
Signed-off-by: Dhivya Subramanian <dthiru@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Support is added for MPEG-2 extension and user data. With this
changes Core returns extension and user data as an extradata.
Change-Id: I66a230aa651dabafa883625ce9f687d5c35b8671
Signed-off-by: Shobhit Pandey <cshopan@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
In slice delivery mode, sometimes video hardware is giving
zero frame tag on output slices instead of input frame tag
value. This commit will fix the issue by copying the input
frame tag value to the output slice frame tag when video
hardware gives zero frame tag values.
Change-Id: Icc75ca72375c4445ff9becaea45b43c03a6ddc17
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Ramakrishna Prasad N <crpn@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
This commit will add support for pause command in
eos state along with run state of the video driver.
Change-Id: I7edd064bb68845f63f0a085165e99f60ed0f3bfe
CRs-fixed: 387562
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
The slices completed is not matching with the expected number
of slices in frame done. The fix is available in July firmware
release and this commit will have the corresponding video driver
changes.
Change-Id: Ic0c3c7ce4f9fdbcd6e8bed852a93dcc533d83a02
CRs-fixed: 380629
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
These messages are non-fatal and appear frequently
during video session. Hence suppressing them.
Change-Id: I539bc966bd79b4074c82a432ba7eb3fd2746bf54
CRs-Fixed: 389408
Signed-off-by: Arun Menon <menon@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Support is added to enable temporary buffer for processing
the MPEG-2 extension and user data for the first sequence
done.
Change-Id: Ib7fdc8bfd50bfb0da651e8da6fca26a3542c671e
Signed-off-by: Shobhit Pandey <cshopan@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
All msm_ion clients need to use <linux/msm_ion.h> instead of
<linux/ion.h>
Change-Id: I521a079686780c117ccc9d91f27b9c59aaeafa04
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Read IDR picture type from 1080p core register set
and propagate it to user space using IDR frame type
enumeration in api header file. The IDR frame type
info is used in SYNCFRAME logic for H264 format in
userspace.
Change-Id: I6f87aea9f3c6e26b06effe68f7cb5a6c17d4bb1c
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
- video core is bumped up to turbo mode, if more performance
level required from multiple clients.
- Enable turbo mode atleast one of client set turbo mode.
Change-Id: Ied777463fdfe54ea6ff3b2a29cbaf0d27a9586cb
CRs-Fixed: 385454
Signed-off-by: Srinu Gorle <sgorle@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Wait for 2 ms to make sure both dsi lanes are in stop state and
fifo are empty before reseting dsi controller.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
During the blank sequence, base layer will be removed if mfd
reference count is 0. Need to add some delay to make sure it
takes effect before turning off panel.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
The transition of BLT enable and disable start at the beginning
of vsync. This ensures that the transition is completed within the
same vsync period. We Wait for DMA-P done after turning off the
timing generator and do not prefill the frame.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
- Add switch device node for hdmi audio on initialization.
- Final node path will be /devices/virtual/switch/hdmi_audio
- Set the node state to 1 when the HDMI EDID for the sink
supports audio
- Set the node state to 0 otherwise(DVI)
Signed-off-by: Arun Kumar K.R <akumarkr@codeaurora.org>
msm_fb_blank_sub might be called for UNBLANK from
display update work queue, which is at commit state.
Idle detection is invalid in this situation
Add detection for external snd earlyuspend/resume interface.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Currently switching mdp blt mode is done in dmap done isr which could
cause mdp hang for some panels/targets. One option is added: turning
off timing generator when switching blt mode, to avoid hang issues.
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Before execute operation on display, make sure it is complete idle
Because non-blocking display update has been introduced, need make sure
display update has finished in all entrances except the ones for
initialization.
Change-Id: I0660080262b7e5895f5f558c0a9f71aa84b9aa99
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
While searching for the available buffer entry in the buffer pool the search
should begin from index 1 as zeroth entry is reserved.
Change-Id: I051b0232bb782f073ba9ad0b757a799703814df3
Signed-off-by: Mohan Kumar Gubbihalli Lachma Naik <mgubbi@codeaurora.org>
Signed-off-by: Iliyan Malchev <malchev@google.com>
Mako's MIPI line clock is a little bit higher than LGSI's recommendation. Due
to this higher clock, flickering could happen in some panels. This patch
reduces the MIPI line clock as LGSI's recommendation.
This also reduces current consumption by ~10mA when the LCD is on.
Signed-off-by: Iliyan Malchev <malchev@google.com>
In suspend state, fb_open cannot turn on panel, need save this info
for resume.
In suspend state, blank setting needs be cached to be used at resuming.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Allowing the MDP clock to use its Max clock in order to avoid the blt
mode switch issues for both MDP mixers, as blt mode switch resulting
in HW hung
Signed-off-by: Nagamalleswararao Ganji <nganji@codeaurora.org>
Non-secure session should be rejected if a secure session is
running.
Change-Id: I13364a7bc4417a682728be333681278e7de8a1f7
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Overlay_play() adds a pipe into pending queue and pan_display()
will commit those pipes to hardware and empty queue. This patch
will make sure queue is empty at suspend so that no unexpected
pipes will be commited to hardware by pan_display() at resume.
Otherwise, iommu page fault may happen.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
HDCP authentication should be kicked off as a scheduled work
item so as to ensure that MDP is already configured and frames
are being transmitted over the HDMI channel prior to the start
of the HDCP authentication procedure.
Change-Id: I27cab44babfc24d91a318b0641674f85910cc33f
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Signed-off-by: Saurabh Shah <saurshah@codeaurora.org>
Support waiting for acquire fences in the buffer sync ioctl.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Display commit ioctl will do what pan_display
can do, addtionally has customized setting, such
as non-blocking call.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Schedule a workqueue, do the current job in the workqueue handler.
Block the second entry if the first one has not finished
Change-Id: I9466c7795bd9d6765f468bf30f4021802d904c36
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Conflicts:
drivers/video/msm/msm_fb.c
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Wait for fence signaled before commit, signal previous
fence after commit done. Same as pan display
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Replace sending of vsync timestamp using uevents with sysfs entry
as uevent result in increase in power numbers due to broadcast in
nature. Also, for smart panel, wait4vsync is removed.
Change-Id: I5219e85b837b8bab9d00a9f40c1048d2a2355194
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Conflicts:
drivers/video/msm/mdp4_overlay_dsi_video.c
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
DSI dcs commands and mdp pixel stream share same dsi link.
Add dcs command list to serialize sending dcs command and mdp
pixel stream to avoid contention which may cause dsi controller
to stall.
Change-Id: Ie0e687f45be479d2137eb7b56b8d32040fba2044
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Conflicts:
drivers/video/msm/mdp4.h
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Reverting this change allows display underflows to cause flashes of blue, which
will help prove that underflows are occurring.
This reverts commit e6f596dbcd307e33e4e4842914a027c7f7138bd9.
If we don't apply CABC register setting at the first bootup, then it makes a
power difference between the bootup time and the first suspend and resume,
approximately 38mA.
Change-Id: I91c915af31e9ff6934ce733f3fb2c8b96e1adf31
Signed-off-by: Iliyan Malchev <malchev@google.com>
Video driver will close the instance if secure call fails.
Change-Id: I39147272a9183f011529078fe8a18ac8cb2726fd
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Signed-off-by: Ajay Dudani <adudani@codeaurora.org>
Signed-off-by: Iliyan Malchev <malchev@google.com>
MSMFB_OVERLAY_COMMIT ioctl is used to display on external.
This is used instead of the default PAN mechanism to avoid delays in that path.
This ioctl for external also waits for DMAE thus fixing tearing.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Arun Kumar K.R <akumarkr@codeaurora.org>
Memory heap should be unsecured if secure call is successful.
This change will make sure that an unsecure will be called
only if securing of the memory heap went through fine.
CRs-Fixed: 393041
Change-Id: I49dd81d1846fc6936518c750a32921c8498ddb95
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Signed-off-by: Riaz Ur Rahaman <riazr@codeaurora.org>
Signed-off-by: Ajay Dudani <adudani@codeaurora.org>
Add sysfs nodes to export the data contained in the
audio data block and the speaker allocation data block
from the EDID of a connected HDMI sink.
Change-Id: Ie558e930cc5790965d46eb2c30156a23643fa1f7
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Fix bugs in the parsing of the Audio Data Blocks and the
Speaker Allocation Data Blocks in the EDID data.
Change-Id: I666cf82d149c8ebb02d3bca3a053e494890870c0
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
You might see the white line while lcd off. You should turn lcd backlight
off before lcd off to avoid that issue. So call the notifier for backlight
before handling of FB_BLANK_POWERDOWN in msm_fb.
Change-Id: I3bd08025a949ec02a1fba7cef98a13d8977c135b
Do not put sync point if it has been added to
a fence successfully in error handling
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
irq enable and disable need to be called symmetrically.
Remove an extra dmap irq disable call.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
During boot up, we observe random lines on screen between the
splash_screen image and the android animation. MDP clocks
were turned off during bootup. Fix this issue by enabling
the clocks when this feature is enabled.
Add check to see that the video mode engine is not busy before
turning off the dsi controller to avoid any underruns.
CRs-Fixed: 399634
Change-Id: I8fdb50fa848362a548b8cdd53ee1817346b57716
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Blt mode may be enabled during system suspend. Need to make
sure blt overlay done before turn off video/lcdc timig generator.
Change-Id: Iad54ee544499213bb7c9cfe60d00919f819aacb1
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Add MSMFB_BUFFER_SYNC ioctl for the communication of
the acquired and released fence fd between kernel and hwc.
Wait for acquired fence before pan display.
Release the previous released fence after pan display
Change-Id: I6534aed574a025d948581e70465f06a86b46c868
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Clear original pipe attributes in the pipe free call.
Change-Id: I776869e7997e5b70e4c2b102e1a394034247bbcd
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Use wait_for_completion_timeout instead of wait_for_completion
not to stuck in the kernel even when the DMA fails.
Change-Id: I29702c3c62f78399c173d660bbbc17a07ed27468
Signed-off-by: Iliyan Malchev <malchev@google.com>
Preserve original dsi-off sequence to remove DMA failure. Previously the power
off sequence was modified to resolve display turn on/off issue, but the changes
were not necessary in current kernel and just caused side effects which
resulted in fb_blank being stuck due to occasional DMA failures.
This reverts commit e1a9b1bda7691e4f62728d09e1993eb9ae9db8d6.
Change-Id: Ia0a60cfdf697675d34066852f106d9e37578073d
Signed-off-by: Iliyan Malchev <malchev@google.com>
Preserve original mdp off sequence to remove DMA failure. Previously the power
off sequence was modified to resolve display turn on / off issue, but the
changes is not necessary in current kernel and just causes side effects
resulting in fb_blank being stuck due to occasional DMA failures.
This reverts commit 0b3bc7e958f98432538a8537739fbaa560761434.
Change-Id: Ia82fb79b56b57f6696c55d9b079eeadebe8c40bf
Signed-off-by: Iliyan Malchev <malchev@google.com>
This reverts commit af3f22de5dd769b555c018c12be837450cd59dd6.
Due to the order of backlight and lcd on/off will be guaranteed by
PowerManagerService, this patch is reverted.
Change-Id: I2e54dc14d338b5bfa1aca1bddcc37b46928a94e8
Signed-off-by: Iliyan Malchev <malchev@google.com>
Conflicts:
drivers/video/msm/msm_fb.c
Adds support to enable or disable mixer commit during pipe staging operations.
Depending on the current activity, this selection can be made.
Change-Id: Ia2f5dbab58f73ef4de90abf7f278332d8d73df46
Signed-off-by: Pradeep Jilagam <pjilagam@codeaurora.org>
Signed-off-by: Ajay Dudani <adudani@codeaurora.org>
Signed-off-by: Iliyan Malchev <malchev@google.com>
Base layer pipe need to be freed at adb stop so that same
pipe can be allocated at adb start.
CRs-fixed: 390644
Change-Id: I948bb27687cfe1c96cc3b071b7bb9bb84b2c52c6
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Ajay Dudani <adudani@codeaurora.org>
Video core stop should be called only if start is successful.
Change-Id: Ie2a8d970355387ee3fcdc34b62184972e89dd6cc
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Encoder driver will expose a new node for clients
intending to start a secure encoding session.
Change-Id: I2a104155fd19534a3b3b35e6606d39047f34c42f
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
We are incorrectly using the firmware heap to allocate prediction
buffers. This violates an agreement between TZ and HLOS that only
the firmware will reside in the FW heap. As such, move the buffer
to MM heap.
Change-Id: I2c91499c38043abfa21ae3443d3a8f22d6474eaa
CRs-fixed: 380161
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
An iommu page fault may heppen When a pipe_commit is executed
in between of frame dropped and pipe_queue during overlay play.
An mutex is necessary to mutual exclusive between pipe_commit
and overlay_play.
Change-Id: I736e821c6c648a6ebd435303a1906a40e9b75791
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Ajay Dudani <adudani@codeaurora.org>
Dcs command mode BLT involves both overlay0 done interrupt
and dmap done interrupt. A transaction is start at kickoff and
end with done interrupt. At some cornor cases both overlay0 and
dmap transaction need to be completed before kickoff new transaction.
Change-Id: I5a3cc6e8255acf2c61fc627d35f990182d226f63
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Ajay Dudani <adudani@codeaurora.org>
To avoid double freeing writeback at end of blt mode, let
both alloc and free writeback buffer done at do_blt().
Change-Id: Ida5d24589c19be8f6f655eca6add00badca356b2
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Signed-off-by: Ajay Dudani <adudani@codeaurora.org>
There has VG1 pipe commit (pan display) happen after system
suspended. This left VG1 still staged up at mdp mixer. Once timing
generator is enabled at resume, VG1 pipe start fetching contents from
address 0 since VG1 has not yet be configured. This cause page fault.
This patch has sanity check at system suspend to make sure no any pipe
stage up at mixer after suspend.
Change-Id: Idcf974ceb4afe2a3ec55b9603b700fa497f84045
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Ajay Dudani <adudani@codeaurora.org>
An earlier commit(ec5b2f)increased the number of reserved fields
in the kernel standard fb.h header changing the struct size.
This caused issues with userland applications using the corresponding
bionic header. This patch revert the earlier increas in size
and makes corresponding adjustments to the reserved field usage.
A follow up patch will remove usage of reserved fields entirely.
Fix the problem crashed while playing video clips and VT camera test.
ion_share_dma_buf is called in pr_debug.
So, it is called depends on build option and makes crash problem.
Since msm_fb_blank_sub() can be called from hdmi which has no
backlight, we should check the null pointer before to run the
get_backlight_on_status().
Change-Id: I9a91dc337b56e20fbfd82347cf429350f1a72b37
To avoid dispalying garbage during lcd on/off, the turning on
lcd should be done before backlight on and turning off backlight
should be finished before lcd off. But current implementation
doesn't guarantee these on/off sequence. This patch ensure the
sequence of lcd and backligth on/off.
Change-Id: I11771d395c1a68b4e70b63639f50c773a665b441
Signed-off-by: Iliyan Malchev <malchev@google.com>
Conflicts:
drivers/video/msm/msm_fb.c
When application calls FBIOBLANK ioctl without backlight control,
even though bl_set_intensity() is called by fb_notifier_callback,
the backlight level cannot be set properly. So this patch add the
level changing to bl_set_intensity().
Change-Id: Id512c2f1bffbde2d47186d40071d05bc1388dc03
In case of data underflow, MDP display specific color on lcd.
Due to data underflow rarely happen during display on/off,
we can see unintended blue screen at that time.
So this patch changes this underflow control color from blue to black
for hiding unintended blue image displaying during display on/off.
Change-Id: I26910065b5210a2571125d25f3f1b41a67ba1c1c
Add lcd color temperature calibration interface and apply
the calibrated value to the target using mdp lut.
Change-Id: Ibdd606a155e0d7708ba79be6f817c3d89b51a282
CABC(Content Adaptive Backlight Control) is supported by
mako lcd panel. So this patch enables it to reduce power
consumption.
Change-Id: I433281bc5fe4e638cfeba1beb9cb61e1775f3896
update lcd initial code and change power on sequence for
new initial code.
Change-Id: Ic876d5dbef3528591ca374ba0f67f073f4584534
Signed-off-by: Iliyan Malchev <malchev@google.com>
sleep 300ms until completing the backlight control. and then set
the panel_power_on and bl_updated as false
Change-Id: Ia289cdcd08ad012d192a079dd1b765d74b911be2
- set initial qcom lcdc lock up table
- interface to calibrate lcd color temperature
- interface to calibrate lcd color temperature by qlut
Change-Id: Iae2607a2ec3447211cdce5e55fac5767cc6d7fb4
If suspend event is received by MDP before panels, MDP needs to ensure
other panels are off before turning MDP clocks off. Remove handlers from
framebuffer driver and handle all suspend logic within MDP driver to
handle this scenario.
Change-Id: Idcda2dd29b28a9993edca78b7e0778985e44b664
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
Current clock logic only considers panel pixel clock to calculate mdp
clock speed, MDP clock speed should also consider other factors such
as surface scaling. Bus scaling should also consider surface scaling
factor. Update logic to consider these new factors and perform these
performance updates together.
Change-Id: If274a7f40f496e1a730e1d0e8d7c35fa4384a832
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
When panel size is increased dma_alloc_coherent is not able to find
a chunk of contiguous memory big enough to hold framebuffer, this causes
framebuffer initialization to fail. Allocate buffer from ion pool which
has reserved contiguous memory at earlier stage.
Change-Id: Ibf7e3f7fc2c7ad991d69c106bbb6a9dd4c7f0e79
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
When in resume or boot time, baselayer pipes need to be committed for
mdp to play, otherwize underruns and blue screens are seen. The
previous pipe stage up func has this commit which is removed now, so
the commit calls have to be added for the cases where base pipe is
initialized.
Change-Id: I63a7d0ac3fb078b3d7f604eb646a0430326a478c
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Fix typo in code which is causing incorrect setting of vertical front
porch on timing generator settings and incorrect output to panel.
Change-Id: I4de61209443fcb284b7d4064a2039b5f546935d1
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
Currently mdp clk and bw requests are predefined in a 4-entry table
passed from the board file, and the logic to decide which level to use
is mainly based on source resolution. This patch is intended to
address several issues with this approach.
One major issue is clk and bandwidth depends on seperate things, and
need to be considered seperately. e.g. with mdp composition of
multiple pipes, bw request may be high but clk requirement may still
be low. The current approach that binds these two things together
causes inefficiency of power.
Another major issue is that there is no logic to calculate mdp clk
requirement of a single pipe based upon panel clk and downscale
parameters. Further the worst case of mdp clk should be determined by
all pipe usage. Without proper logic, many underrun have been
experienced, and blt mode may not be enalbed properly.
Also mdp_clk or blt mode update must be on right timing especially
between these two pathes: overlay play and pan display. In the
situations of performance from high to low or from low to high clk and
blt must be handled properly to avoid underruns.
In a summary, to support many different panels and targets and
complicated mdp pipe usage(mdp composition), mdp driver related to clk
and bw needs to be implemented differently. This patch is to seperate
clk and bw, and maily to deal with mdp clk and blt. Later increasing
granuity of bw will be added.
Change-Id: I678fbf86d6997ed7b602ce81cf2e0fff6164d129
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Timing generator was getting started before the register flush.
Stale values were sometimes causing IOMMU page faults on bootup.
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Change-Id: Ia671c3603e383af94197a23a8e5e5f32274a9978
Since stage commit had been splited out of stage up fucnction,
it needed to be called to stage pipes into mixer befroe
kickoff mixer. Add this function into overlay writeback for WFD.
Change-Id: I11e4486d92b89a15e58531033d474b3137b5935a
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
In case ASIC 1.1 is used on 8064 platform, LVDS bit mapping
misalignment is fixed and no remapping is needed. LVDS bit
mapping should comply with VESA format to get correct panel
display.
Data line #3's bit mapping should be coded in this sequence:
DE + VS + HS + .... Change the original codes to go with this
sequence.
Change-Id: Iaebcfcea9c52207e16bac54ec37dc63e97286ff4
Signed-off-by: Lei Zhou <leizhou@codeaurora.org>
Wait for dmap done to turn off TG to avoid underruns before base
pipe setup and after constant splash during boot time.
Change-Id: I64bc3935d996af1d2d54db4c11319301ea454ced
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
We get the error message for the incorrect aspect ratio
with each frame of the video. By reducing the priority,
error message will appear only when we enable it.
Change-Id: Iacb8002383ea6c0b7ee86e9cfe14478c0e5ca5c3
Signed-off-by: Rajeshwar Kurapaty <rkurapat@codeaurora.org>
If a panel probe does not succeed, call mdp_clk_ctrl to maintain
mdp_clk_cnt counter else mismatch in counter results in mdp clock
to never go off in cases like suspend-resume.
CRs-Fixed: 385560
Change-Id: I4ca54b051af98e823dc7f3ff7b9bcb960532c7e8
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Increase the upper limit for the pixel clock that
changed with the newer version of the DSI controller.
CRs-Fixed: 380003
Change-Id: Ibbeaa478b4d12ae8f350be41f959d53a6ae6c923
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Using RGB888 as source format and rgb565 as destination pixel format,
will cause image corruption on the display. Fix this issue by
setting the destination format as RGB888 in MDP and DSI controller
pixel format as RGB565 for DSI specific panels.
CRs-Fixed: 377484
Change-Id: If58976ee9cd4825efb39437170e54796fa2213e0
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Improper yuv buffer size is being calculated using frame
height directly, which is resulting into failures during
encoding if the frame height is not aligned to 16.
With this change, yuv buffer size calculation is done
properly by using scanlines in place of frame height.
Change-Id: I22602d6a0eddfa4016f4bdc3479e5b7d9b89a4e7
CRs-Fixed: 378988
Signed-off-by: Deepak Verma <dverma@codeaurora.org>
At run time, mdp BLT (writeback) mode is enabled and disabled
base on performance level to avoid mdp underrun. Move BLT
enabled/disabled logic to pan display so that enabled/disable
is done per commit instead of per queue. Since all panels
are shared same logic, dsi video mode and lcdc panel BLT logic
have been changed accordingly.
Change-Id: I6e04bf0f7bf1c13634e19b18d8ac4368affbc4d8
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
For multi-resolution clips, the meta data offset used while
doing cache clean of meta data buffer is from the previous
resolution & resulting in kernel panic. Resetting the offset
to zero during meta data buffer initialization for new
resolution fixes the issue.
Change-Id: I06b20e10efc837fcfe44f532e90293734b4d2df8
CRs-fixed: 386245
Signed-off-by: Rajeshwar Kurapaty <rkurapat@codeaurora.org>
Need to give proper buffer size for snprintf function calls.
CRs-Fixed: 378343
Change-Id: Ia4df74c9871b26255572bb3ba226317c3076b5b6
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Base layer pipe is cloned and cached at satge array.
Retrive the real base layer pipe before used it.
Change-Id: I6fc606559684156348a57b500083ed4089fc71b5
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Free iommu buffer after pipe is committed to hardware.
Change-Id: I00506d6fd55d99fec7921c02953fd755a7536d3e
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
One second time out for no frame update, as in current implementation,
does not allow CABL to reach minimum backlight level possible because
histograms dont get generated after one second. So increase time out
period to two seconds which seem to be sufficient for complete black to
complete white and vice versa transitions.
CRs-Fixed: 370804
Change-Id: I0712924d669abcb820654cd6ca5f7da37bed57e6
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
MDP hw init is getting avoided for MDP3.x targets to support
continuous splashscreen. This avoids complete initialization
of MDP and hence usecases are failing. This change allows the
hw init.
Change-Id: Ib0304b54bda4a62a20716bde85fe94b2dcfe6824
Signed-off-by: Pradeep Jilagam <pjilagam@codeaurora.org>
A few places have unnecessary mutex unlock calls, and iommu pipe free
depends on pipe parameters so move it before pipe is zeroed.
Change-Id: I7ef39c66be611907b1b0c38675b15f8bc919d0c0
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
During pipe free, some content of pipe is backed up and then after
pipe is zeroed out, the content get restored, in between there should
be no actions to change the content since any change will be wiped out
by the restore.
Change-Id: Ia6da0162d1f9b614682e1fc36edab1db003b42ab
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Video core expects one field per buffer for interlaced
clip playback.If a flush is issued we should reset the
need next field flag, so that new bitstream is processed
after flush is completed.
Reconfig flag shouldn't be reset in case of EOS.
Change-Id: Idf50a24c29e904a958b0b1e850813e2d9fc4346d
CRs-fixed: 382368
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Fixed iommu map buffer dropped after overlay unset by saving
origianl iommu list before zero out overlay pipe structure.
Change-Id: I498dd4cf62e93f4571883fe20a0298e9fad4ccab
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Add support for vsync notification to user space using user events.
This is to trigger frame composition based on Vsync.
Change-Id: Ie94edfcdb5e540dd2f9a4a5df4bc3b7c4eb9041c
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
This commit will add support for ION memory on
8x55 target for video encoder and decoder.
Change-Id: I23be61d698cf3c6ee81846bad61be15b9e3f824f
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Enable sending vsync uevent as default so that uevent will
be sent to usersapce frame work when first request recevied
Change-Id: If72248007d68cba8fc814d449b46a58d842544ba
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
When HDMI is primary, dtv is associated with node 0. In this case,
DTV vsync and ctrl need to be called for node 0.
CRs-Fixed: 383877
Change-Id: I425cddf453dd159259883e71f92c32918ca8e6c7
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Add the dsi driver implementation for
DSI version 3.0. Use the panel information
retrieved from the 'dts' to configure the
interface parameters.
Add the device tree binding file to specify the
basic configuration and panel features.
Change-Id: I6a3677401454ad1d2bc29b0b845b0366eb7842b7
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
The mdp h/w cursor buffer physical address needs to be mapped to an
iommu virtual address when iommu domain is enabled.
Change-Id: I73b4492fc4d63632117074136e4d908f5089eb93
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
When a mdp pipe is in solid fill mode, the pipe outputs constant color
and pipe itself does not fetch data from memory, so pipe src size
should not matter. However, when src size is greater than dst size in
solid mode which means downscaling, underrun happens. In this
situation, setting src size to be same as dst size can remove underrun.
CRs-fixed: 368478
Change-Id: Ie3ffc34486129cddcc872fe6e5317873db985b97
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Calling this function is not necessary in mdp overlay2 writeback
driver. If called, it causes command mode primary hang.
CRs-fixed: 365332
Change-Id: Id7054c3e56224035ec5939d91f8ce152b038e858
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Writeback panel is not real physical panel and no power consumption
concern, so it is removed from early suspend registration to avoid
open fb2 error during suspend/resume.
Change-Id: Ic61f69e069f2da8c73f2b5a13d103a2f20034d20
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Core gives aspect ratio information for H264/Mpeg2 in a
shared memory register. This change will fetch the value
of the aspect ratio from the designated register and append
this information to the frame_info extradata which can be
used by the client.
Change-Id: Iacacaf1b1181546ba2d09362a51bbe5178a63999
Signed-off-by: Deepak Verma <dverma@codeaurora.org>
Add changes to support continuous splash screen on 8x25 SKU7
for LCDC panel. Delay the MDP hardware initialisation,
keep LCDC timing generator enable during boot up, do not
disturb the GPIO/regulator configurations and skip the
panel initialization sequence during boot up.
Change-Id: Ied091b01ad2f26acdff73e3ffe158d844198923c
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Add changes to support continuous splash screen on 8x25
for video and command mode panels. Delay the MDP hardware
initialisation, keep video timing generator enable during boot up,
do not disturb the GPIO/regulator configurations and skip the
panel initialization sequence during boot up.
Change-Id: Id5e635ca986e66abb3cbf7c5a174f952ea489708
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Use YCrCb 420 (NV12) as the output format for writeback. For Wifi Display
use case, NV12 is required as the encoder requires this as the output
format.
Change-Id: Ica8851073476b9c05f3b5b41232803c2d71f7a3e
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
For local clients, return the relevant msmfb_data which contains a
cookie relevant to the client.
Change-Id: I9b845c0cd7fde1bc8c53a5063ba331460d67427d
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
Video driver currently supports registration of 4 clients.
Increasing number of clients count to 6 to support new usecases.
Video driver will limit number of instances to 4.
Change-Id: If00911ef1027b1e44917465791ef3612e6c59ed1
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
MDP4 blend logic differs from GPU blend implementation as MDP4
does not differentiate between pre-multiplied alpha layers and
non pre-multiplied alpha layers. Check layers for pre-multiplied
alpha and change blend logic accordingly.
CRs-Fixed: 355755
CRs-Fixed: 361729
Change-Id: Id8253d3888f1ebbadba1b6bbd87e7d98bac22da7
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Modify LVDS Chimei panel pixel clock from 75 MHz to 79.4 MHz
and update PLL settings to achieve refresh rate of 60 Hz for
better user experience.
CRs-Fixed: 375510
Change-Id: Ifb4036c790552b1c43d5a3c817ed05691f86c7f6
Signed-off-by: Ravishangar Kalyanam <rkalya@codeaurora.org>
Framebuffer is currently mapped for Display read and rotator source
domains. For MDP writeback mode, Display write domain requires
framebuffer region and it is mapped at initialization time.
CRs-Fixed: 382550
Signed-off-by: Ravishangar Kalyanam <rkalya@codeaurora.org>
Change-Id: Iba6fd0201a48fe1864bf42e9576f063cd58646fd
Reserved fields of fb structure used for various use cases
in qcom fb driver. Reducing the reserved fields caused lot
of side effects and it will change the reserved fields same
as kernel 3.0.
Change-Id: I7bf82a9b5667cb5c84b54e428bbfcb6869157bd7
Signed-off-by: Nagamalleswararao Ganji <nganji@codeaurora.org>
Panel porch values and pixel clock can be used to calculate the refresh
rate from user space. Assign these values with information from panel
driver.
Change-Id: I29995d27904e50892d72de5e8c7dd39285f9d421
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
When mdp pipe is freed at end of video play back, Writeback
buffer is freed while mdp still fetchs data from it. This cause
system crashed and blue screen shows on screen. This patch
will free writeback buffer at correct time.
Change-Id: I46a5031c13d86f943d6604713e1841b482dffe96
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Debug writeback is used to output MDSS framebuffer contents to memory to
for debugging of MDSS core. Use ion buffer allocation for debug
writeback buffer instead of using memory from framebuffer base layer to
allow entire framebuffer area to be used for composition.
Change-Id: Ia1a91f5f14bed1d29691092142fc94f7a8b6f4d2
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
Source format should indicate that source is to be rotated 90 degrees
instead of indicating source has been rotated 90 degrees. This is needed
for hardware to fetch source in correct order and generate correct 90
degree output image.
Change-Id: If8d1e12ef3e7a291e67ec9763f5ca92ec6fa983c
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
MDSS does not support odd width, height or src offsets for YUV formats,
however odd coordinates are acceptable for dst offsets. Remove odd check
done for dst offsets
CRs-Fixed: 372900
Change-Id: I69230640f94bf080a8be4ea6d79f0901a7fa72cd
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
This patch will queue multiple surfaces and commit those
surfaces into mdp at same instance so that surfaces will
be blended and displayed at same time. Hardware vsync event
is delivered to the user space frame work via uevent. Both
queue and commit are controlled by frame work and synchonized
with vsync event. Therefore frame rate will match with vsync rate.
Change-Id: If630a6d94fd38483ee313f575b1a71ed8bd65a52
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Add support for CSC and QSEED configuration through MSMFB_OVERLAY_SET and
MSMFB_OVERLAY_PLAY ioctls. Provide better integration than previous attempt
with the existing Overlay and PostProcessing APIs.
CRs-Fixed: 380750
Change-Id: If895391074ef1e7d7a6824d289e1ed9da6a52180
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Remove old implementation of HSIC and QSEED smoothing/sharpening overlay
integration. Need to replace with new implementation that better integrates
the existing functions of the two APIs.
CRs-Fixed: 380750
Change-Id: Id3469fad16764ed88e74a8da75bb873f726ba366
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Add support for QSEED Table2 reads/writes. Table 2 is a table of coeffients
for QSEED Table 1 to offset into. Table 2 is quite large, caution should be
taken when writing into it.
CRs-Fixed: 380315
Change-Id: I89be18c0047dcf1d9a3bcd538967b2bbe7b4efe1
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Add support to read the tables of QSEED values. When the values of the
QSEED tables are able to be written to, it is beneficial to be able to read
what's there as well.
CRs-Fixed: 380315
Change-Id: I3110721906424f70a12bf5736de7875dec03f4c6
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Turning off dtv TG may cause blink. MDP requires h/w idle to change
blt mode, turning off TG can make sure mdp h/w is idle. If turning off
TG is not desired, one way to do is to check busy bits of overlay and
dmae and once they are both idle, the mode can be changed.
CRs-Fixed: 363717
Change-Id: I2817d7751ed04fd9ed144974328c4518c54af3d6
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
MDP pipe or mixer size registers have 12-bit number, so boundary
checks are needed for those parameters. If not, input req sizes could
be very large 32 bit unsigned numbers, e.g. 0xffffffff, unsigned
operations may have overflow to pass all later checks, causing MDP
underruns or hang issues.
CRs-fixed: 380469
Change-Id: I096d7022ede21d54266b46a140782ab0348dd54b
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Tearing was observed while playing 1080p H264 videos in
potrait mode. Enabled blt mode check for MIPI command
mode panel as well.
CRs-Fixed: 369365
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Change-Id: Iac980050e5966db4731240c11e89e1f68118f2b7
After disconnecting the phone from TV which doesn't support
underscan, and connected to TV which support underscan,
underscan is not working due to non re-initialization of
scan variables. Re-initialize the underscan variables for
every HDP events.
CRs-Fixed: 375862
Change-Id: I22b7b8785ec93f9cf226e9b646a851ffb3ceff62
Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
When HDMI is primary, suspend-resume is not happening.
For HDMI as primary case, early suspend and resume can be
used. This change implements early suspend and resume for
hdmi as primary case.
CRs-fixed: 381097
Change-Id: I7b83d07a8b109294f3606c60f58b760836b88685
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
In case of PAN display, PAN update function would return
without allocating dtv pipe resulting in no HDMI display.
This change removes unnecessary checks and enable dtv pipe
for PAN display as well.
CRs-Fixed: 379625
Change-Id: I533392a1120a21e962fbbbf0c07a89997832406f
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
