ISDB-T client requires end of sequence notification
in the flags of the output buffer when sequence end
code is queued to the video core. Add support by reading
from video core shared memory and update the output buffer
flags for MPEG-2 codec.
Change-Id: Idd88fc6a5cdccb41fa61ba902a0014ec8359739a
Signed-off-by: Rajeshwar Kurapaty <rkurapat@codeaurora.org>
mdp clk is not released in mdp4_overlay_writeback_on()
CRs-fixed: 433986
Change-Id: Ida121e03b0f08ca312c60fb8d945fe2011df853f
Signed-off-by: Mayank Goyal <goyalm@codeaurora.org>
Currently video maps and unmaps the secure memory.
It could be too early to unmap it.
Rotator and MDP will maintain this, only unmap it when
no more needed. Memory managr has a refence count for it.
Change-Id: I5ca7cb09c0ad4b9e39808e937c2f50264727730c
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
The check condition for updating bus bandwidth if downscaling is
needed was always FALSE.
Change-Id: Iec0a4d13c7737d86976d76e0dfd3ec45062799fd
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
For the panels which backlight is controlled by gpio, add this logic
in driver to turn on/off backlight, instead of calling board panel
on/off functions, to avoid garbage display due to early backlight
turn-on.
(cherry picked from commit 3eebb2e33570e32d11a757e493e12a8e79e08d6f)
CRs-fixed: 408728
Change-Id: I6f1b9bd78d96dbf1492e854edd59b05f8dec205f
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
vsync is controlled by frame work which means vsync irq
off may happen at any instance. This patch use a reference
count to control vsync irq enable/disable so that
wait4vsync can replace msleep safely during suspend.
Change-Id: Ief84b1b421436e1f750288eb9a9760a9cb96c555
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
If frame rate value for mipi video panel is coded in panel file it can
be directly used to avoid calculation error.
Change-Id: I6ad86226c81da4bcf36196385f9ff4bea0bef0ca
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
mdp clock is controlled by frame work. There has
possibility that mdp clock had been turned off while
frame update still happen. In this case update
thread may stuck at wait4vsync since there has no
mdp clcok to trigger vsync interrupt. This patch
will enable mdp clock at pipe commit when mdp clock
is tunred off so that frame update can be completed.
Change-Id: I2d31b9a4b6f0cb9dd36516a80931988e23e8a545
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Enable new mdp update method which requires flush bit
to be set before updating mixer cfg register for both
smart and dump panel
Change-Id: I97b9d221da574a96707748ec83dd1acff6dcb654
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Meta buffer header initialization is required if we process
extradata in secure playback.
Change-Id: Ic8a068e99351f2c970643200d03b1a580ead7480
Signed-off-by: Deepak Verma <dverma@codeaurora.org>
In Suspend case, after we complete for no_update timer and before
we set power down flag to false we might recyle the CABL sequence
which might cause do_hist to fail till resume
CRs-Fixed: 434491
Change-Id: I51f9f0d9edb26c7671d44162f55c01acdde8f3d7
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Currently, if the histogram disable IOCTL comes after panel
is turned off, we early return the IOCTL causing the interrupt
to be left enabled. This causes IPC issues during suspend. Fix
this issue by properly enabling/disabling the histogram interrupt
during suspend/resume scenario.
CRs-Fixed: 434491
Change-Id: I4d38776a43ea854aff3c10c8d9d5450af1d98c91
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Need the value of var in display commit to update the double buffers.
If not, double buffering doesn't work in minui (eg. recovery and off-charger
mode)
Change-Id: I1fba52243cc781f18742131759245911d32c9b18
Signed-off-by: Devin Kim <dojip.kim@lge.com>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
FB_ACTIVATE_VBL bit is set to enable TE logic at pan_display
and unset to disable TE logic at pan_display for smart panel.
This patch checks for FB_ACTIVATE_VBL bit set only instead of
value.
CRs-fixed: 433399
Change-Id: I6fc913c6752fcca6a27c783c45ab318065217973
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
For cmd mode the frame rate calculation result is wrong. Also in mdp
driver there are several places to do the same calculation. So fix the
wrong calculation and use a single func to do calculation.
Conflicts:
drivers/video/msm/msm_fb.c
Change-Id: I3a4be39e480ce82677dcefb666202947f7f6d3c1
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
(cherry picked from commit d4eb5a1a3ef0935ce6aeffb2b48974c01b9518b9)
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
mdp bus client could be registered multiple times without the check.
Change-Id: I582741c75e815873357e62bc9bf0ff61a4cecf9f
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
This change adds free buffer api to video
client's flushing state to allow buffer
freeing in flush state.
CRs-fixed: 430214
Change-Id: I970efbbd8cc503eab4b944e12630f1b1faa9069c
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Memory allocated for "buf_entry" and "sched_cctxt"
is not freed in case if error is returned. This
change prevents possible memory leak in video
decoder driver.
CRs-fixed: 432323
Change-Id: I1c8775fb701f1568f704b6ddbb4e835304d2a817
Signed-off-by: Shobhit Pandey <cshopan@codeaurora.org>
This patch allow satge commit without pipes queued to
allow a pipe to be un-staged from mixer immediately after
overlay_unset.
Change-Id: I03abb907c66cce3d0559743d3bb1eb26a88dc78a
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Moving RGB1 and RGB2 to AXI port 1. This fixes underrun issues seen
on External display while connecting and disconnecting HDMI. This patch
evenly balancing pipe loads on each port.
Change-Id: I2dc1166d04bb938f9e233a6de52f1a8a3fdd29e2
CRs-Fixed: 435458
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
mdp_clk_ctrl on is not called when commit is from overlay commit path
which can cause mdp hang. mdp_clk_ctrl off should be after mdp
overlay2 is done, so schedule a work in overlay2 done isr.
Change-Id: I94fd08da27cfda114f5cc0056a5103f0a9b772f6
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
FIR and M/N scalar when used for downscaling, drops
alpha channel of the given layer. To notify this, alpha_drop flag
is updated accordingly. This flag need not be checked for layers
with no alpha plane. In some scenarios alpha_drop may get enabled
for the layers with no alpha plane and cause issues realted to blend
composition of layers. Check for setting alpha_drop only if source
ayer has alpha plane.
Change-Id: Ie64b30c045a78d0d68eb9efacc76902afae7850d
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Retain RGB1 iommu information during base layer swap
so that iommu used by RGB1 can be freed back to pool later.
Change-Id: Ibed85179284743dc8a9d1434f0c81626b0567e16
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit be46f9f596c5172438a74759d48ca7db600cd737)
Remove unused fence input in mdp_display_commit
structure
Use different timeline name for different fb
Change-Id: I4edd335b36dce057ff3e54302af6088a9cc470ec
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
We should reset the data corrupt flag only for codecs
other than H264 and MPEG-2 in line with the video firmware
support. Hence, modify the conditional check.
Change-Id: I7c4d5557a3f9b1d1762fe7cfcd5693a6760188f0
Signed-off-by: Rajeshwar Kurapaty <rkurapat@codeaurora.org>
(cherry picked from commit c165675bf03feb182bfd46d2ac5ceebcf4987f74)
Signed-off-by: Manish Kumar <manishku@codeaurora.org>
ISDB-T client requires flags indicating the correctness
of output YUV data from MPEG-2 decoder. With this commit,
DATA_CORRUPT flag is sent from the driver if the output
YUV is either INCORRECT or APPROX_CORRECT.
Change-Id: I72e8ba81f45200715a195497d4eae140cbe86616
Signed-off-by: Rajeshwar Kurapaty <rkurapat@codeaurora.org>
(cherry picked from commit d68ca84da4a5c68eb2caf1f9e4dbb665bba5a05c)
Conflicts:
drivers/video/msm/vidc/1080p/ddl/vcd_ddl_interrupt_handler.c
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Signed-off-by: Manish Kumar <manishku@codeaurora.org>
MPEG-2 display aspect ratio calculation was done similar
to MPEG-4 standard. Correct it as per the MPEG-2 standard
and video core interface specification.
Change-Id: I1aa98ca238c7b38e35c78905b29457cfa59edd45
Signed-off-by: Shobhit Pandey <cshopan@codeaurora.org>
(cherry picked from commit ce5f973881c11491c3fa35ceb8c945a6c8ee2b8f)
Signed-off-by: Manish Kumar <manishku@codeaurora.org>
The JB MR1 update was not recognizing the LVDS panel and hence
throwing an invalid panel error. Adding check for LVDS panel to
enable display on 8064 CDP.
Change-Id: Ib125cc797b288ca027f91778d9892acfa00a3214
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
There are two pathes (pan display and overlay commit) to commit
display buffer, so change the location of cpu timer wakup call to the
common pipe_commit function to make sure cpu get waked up around
vsync.
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Change-Id: Idbe6049d740a7e17a6a90e28566f7a9c74e348f2
Add this feature for cmd mode panel. The feature is to avoid frame
drops due to power collapse and it is already present for other
display interfaces.
Change-Id: Ic68f41cd59931294b592577475ed7480459f2cf8
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
To avoid frame drops due to power collapse,
wake up cpu right before vsync.
Conflicts:
drivers/video/msm/mdp.c
drivers/video/msm/msm_fb.h
Change-Id: I63385eb329ae5e74cbac5256823fd3a213e0a0e1
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
- Due to race condition between free buffer and flush output buffers,
invalid buffer is getting accessed sometimes.
- Reset all the members in buffer entry except list elements.
(cherry picked from commit 8105df366cf6b9f1ddbc15d561fb6a5f12540416)
CRs-Fixed: 411197
Change-Id: Id95037f57d7fe4bc88b96f187953194ec838d63b
Signed-off-by: Srinu Gorle <sgorle@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Update the profile info in the sequence header with the
info which the core returns in the shared memory register.
(cherry picked from commit 5a60819aeb698b9d27937329bb5559a7a787a06e)
CRs-fixed: 408349
Change-Id: I6db75c907260c9744ec4e0d88db776be9bca8dea
Signed-off-by: Shobhit Pandey <cshopan@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Currently mdp bandwidth request logic is based on source image size
and number of layers. This logic can not support complicated mdp
usecases and it is not power efficient. The logic is improved by
calculating mdp bandwidth request at runtime from all pipes and mixers.
Conflicts:
drivers/video/msm/mdp.c
drivers/video/msm/mdp4_overlay.c
drivers/video/msm/mipi_dsi.c
CRs-fixed: 425823
Change-Id: I63206f00f8d3017a2449f8ac617fce3ba2a4d36c
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Borderfill pipe need to be kept as baselayer which is not
suppose to be freed at suspend. It only be freed when
ref_cnt reach 0 by "adb stop".
CRs-fixed: 429196
Change-Id: Ibffe7960cc194162d1ba71e8dc8636393938483f
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Some panels need to be initialized after panel is on.
Add late_init to support this feature.
CRs-fixed: 433011
Change-Id: I73c623d1fe52363f070af79ce4bf7774cd84689e
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Both mdp and mdp_vsync clks are disabled for command mode panel when
no new frames are being played. When they are re-enabled if new
requests come in, the first vsync event which is signaled by read
pointer interrupt arrives in a random time due to the sync between mdp
and panel, so skip it to maintain correct vsync timing.
Change-Id: I683b765e4a16d3d152b9270f5982234b94921f1e
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
(cherry picked from commit a4567ac320abe5d74b3c7decdbddba4bd8c57463)
In resume, previous cached request data needs be cleared as
they do not reflect the current hw status.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Conflicts:
drivers/video/msm/mdp4_overlay.c
Change-Id: I6e3abe09a38b4499ceb168ea7b0351672253a6cd
Signed-off-by: Ramakrishna Prasad N <crpn@codeaurora.org>
Buffer flags are going to be specified at allocation time rather than
map time. This removes the flags argument from the ion kernel map
function.
Change-Id: Ib983ecd0dcd7befb36287ae7037c71d4ca475f90
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
The symbols CACHED and UNCACHED have been replaced by ION_FLAG_CACHED
upstream. This removes them from the kernel.
Change-Id: I90c33c293f56792131fc6bd490fe041b5798ac20
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Changes to pass ION_SECURE in the correct argument field
while calling ion_alloc. Without this change secure session
fails.
Change-Id: Ifa4878b1c312beafc735cb649570913159799d7c
Signed-off-by: Srinu Gorle <sgorle@codeaurora.org>
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Heap mask field passes as argument at allocation time to specify ion
heap.
Change-Id: I6951da81b11bfcb0e006d2539c1707aabbb12db6
Signed-off-by: Hanumant Singh <hanumant@codeaurora.org>
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
All msm_ion clients need to use <linux/msm_ion.h> instead of
<linux/ion.h>
Change-Id: I7b5390d7cb9cb5b03227b77def248c48b7bc7fa2
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Timing generator will not be turned on if there are no pipes queued.
Therefore wait_for_completion may never be completed if there have
no pipes queued.
Change-Id: Iafba086e4ba20b31470c9fd385c4f5c474ecadcf
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Mayank Goyal <goyalm@codeaurora.org>
Both mdp_isr() and mdp_histogram_disable() uses the same
spin lock mdp_spin_lock variable. One core waits for disabling
mdp_isr after acquiring mdp_spin_lock and other core in mdp_isr()
waits for spin lock mdp_spin_lock and dead lock between two cores.
Change-Id: I73a10494ab78e92fc88a348aed4f526091b51f89
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Remove the modification of mdp_rev during mdp_probe. Not needed since
board files now have the correct MDP revision data.
CRs-Fixed: 417080
Change-Id: I553cb2a8e8de43b6c7b7976c3eca67d00a3cfe4f
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Conflicts:
drivers/video/msm/mdp.c
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Send the ETIMEDOUT errno when the update-notify wait_for_completion times
out. This is required to be able to properly handle the different failure
cases in the functions that use the update notify ioctl.
Change-Id: I0e46b0b0c89f6b2e5beb3fc0ed18ebbb75dfa434
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
