android_kernel_google_msm/include/linux/i2c-omap.h
Andy Green 5c825ee202 I2C: OMAP: add rev to omap i2c platform data
We need to pass the I2C IP revision from the hwmod class up
into the OMAP I2C driver, which does not have direct
access to it.

This adds a member to the platform data the OMAP I2C driver
does use already to hold the I2C IP revision.

Cc: patches@linaro.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29 09:37:07 +01:00

42 lines
1.4 KiB
C

#ifndef __I2C_OMAP_H__
#define __I2C_OMAP_H__
#include <linux/platform_device.h>
/*
* Version 2 of the I2C peripheral unit has a different register
* layout and extra registers. The ID register in the V2 peripheral
* unit on the OMAP4430 reports the same ID as the V1 peripheral
* unit on the OMAP3530, so we must inform the driver which IP
* version we know it is running on from platform / cpu-specific
* code using these constants in the hwmod class definition.
*/
#define OMAP_I2C_IP_VERSION_1 1
#define OMAP_I2C_IP_VERSION_2 2
/* struct omap_i2c_bus_platform_data .flags meanings */
#define OMAP_I2C_FLAG_NO_FIFO BIT(0)
#define OMAP_I2C_FLAG_SIMPLE_CLOCK BIT(1)
#define OMAP_I2C_FLAG_16BIT_DATA_REG BIT(2)
#define OMAP_I2C_FLAG_RESET_REGS_POSTIDLE BIT(3)
#define OMAP_I2C_FLAG_APPLY_ERRATA_I207 BIT(4)
#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK BIT(5)
#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK BIT(6)
/* how the CPU address bus must be translated for I2C unit access */
#define OMAP_I2C_FLAG_BUS_SHIFT_NONE 0
#define OMAP_I2C_FLAG_BUS_SHIFT_1 BIT(7)
#define OMAP_I2C_FLAG_BUS_SHIFT_2 BIT(8)
#define OMAP_I2C_FLAG_BUS_SHIFT__SHIFT 7
struct omap_i2c_bus_platform_data {
u32 clkrate;
u32 rev;
void (*set_mpu_wkup_lat)(struct device *dev, long set);
int (*device_enable) (struct platform_device *pdev);
int (*device_shutdown) (struct platform_device *pdev);
int (*device_idle) (struct platform_device *pdev);
};
#endif