mirror of
https://github.com/followmsi/android_kernel_google_msm.git
synced 2024-11-06 23:17:41 +00:00
b5b3db3704
This provides the ability to handle simple debug commands from an fiq-context uart based debugger. kmsg - dump printk log pc - show current PC and mode regs - show current registers Other commands are handed off to an IRQ handler which calls the kernel_debugger() routine provided by KERNEL_DEBUGGER_CORE. Signed-off-by: Brian Swetland <swetland@google.com> [ARM] msm_serial_debugger: Better interoperability with shared serial pins. Introduce debug_enable, debugger will not echo back RX characters until a CR is received. Other modules can turn off debug_enable via msm_serial_debug_enable() interface. Flush when doing TX in FIQ context. Turn off interrupts and flush when doing TX in IRQ context. Send a \r with every \n sent by the kernel debugger when processing console messages. Signed-off-by: Brian Swetland <swetland@google.com> [ARM] msm_serial_debugger: irqs command to dump irq count Signed-off-by: Brian Swetland <swetland@google.com> [ARM] msm: msm_serial_debugger: Add irq status to 'irqs' fiq debug command. Also clean up some alignment Signed-off-by: Nick Pelly <npelly@google.com> [ARM] msm: fiq_debugger: Add ability to enable / disable debugger at runtime Signed-off-by: San Mehat <san@android.com> [ARM] msm_serial_debugger: Support 19.2MHz clock on scorpion. Signed-off-by: Arve Hjønnevåg <arve@android.com> [ARM] msm_serial_debugger: Add wakeup irq and disable uart clock when idle The serial debugger is now inactive by default so we can enter low power modes. Hit enter twice to activate it for 5 seconds. Signed-off-by: Arve Hjønnevåg <arve@android.com> [ARM] msm_serial_debugger: Keep uart clock on when CONFIG_MSM_SERIAL_DEBUGGER_CONSOLE is enabled Change-Id: I8c4e3c77d429a8f6fde068672d51e750e0f14c1b Signed-off-by: Arve Hjønnevåg <arve@android.com> msm_serial_debugger: fix to build without CONFIG_PREEMPT Change-Id: I71e115a26142cccd809aa979dfa9541f842ae680 [ARM] msm: serial_debugger: move the clock disable to after we enable the fiq If the uart fifo is not empty when we enable the fiq, the handler will try to empty it and hang since the clock disabled prior to enabling the fiq. Signed-off-by: Dima Zavin <dima@android.com> [ARM] msm_serial_debugger: Add option to keep serial debugger active from boot. If msm_serial_debugger.no_sleep=1 is added to the kernel command line, or MSM_SERIAL_DEBUGGER_NO_SLEEP is selected in the config, the serial debugger is activated on boot and stays active until it receives a sleep command. Change-Id: Ibf84435af8203360ee808fd903dd6322cf5d9d17 Signed-off-by: Arve Hjønnevåg <arve@android.com> [ARM] msm_serial_debugger: Fix startup when no_sleep is set Change-Id: I7e55567d723e30d3e998d625aa7a53f896b55d61 [ARM] msm_serial_debugger: Add option to never disable wakeup IRQ. This works better if the radio ignores the uart clock request while power collapsed. Change-Id: Ib0989e714e883b3667c9ecc4cfd1ebfe014a35df Signed-off-by: Arve Hjønnevåg <arve@android.com> [ARM] msm: Fix register dump in fiq debugger Change-Id: Iff5cd48291c9b09aace30220c4229c157a7db1d0 Signed-off-by: Arve Hjønnevåg <arve@android.com> [ARM] msm_serial_debugger: Add some debugger commands Add allregs to dump registers for all modes. Add bt to get a stackstrace. Change-Id: Ia85e72b6c8243eba38a04cf4f6cc9cba5342a6de Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: David Brown <davidb@codeaurora.org>
421 lines
9.4 KiB
C
421 lines
9.4 KiB
C
/*
|
|
* drivers/serial/msm_serial_debuger.c
|
|
*
|
|
* Serial Debugger Interface for MSM7K
|
|
*
|
|
* Copyright (C) 2008 Google, Inc.
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <stdarg.h>
|
|
#include <linux/module.h>
|
|
#include <linux/io.h>
|
|
#include <linux/console.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/kernel_debugger.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <mach/system.h>
|
|
#include <mach/fiq.h>
|
|
|
|
#include "msm_serial.h"
|
|
|
|
static unsigned int debug_port_base;
|
|
static int debug_signal_irq;
|
|
static struct clk *debug_clk;
|
|
static int debug_enable;
|
|
static int debugger_enable;
|
|
static struct {
|
|
unsigned int base;
|
|
int irq;
|
|
struct device *clk_device;
|
|
int signal_irq;
|
|
} init_data;
|
|
|
|
static inline void msm_write(unsigned int val, unsigned int off)
|
|
{
|
|
__raw_writel(val, debug_port_base + off);
|
|
}
|
|
|
|
static inline unsigned int msm_read(unsigned int off)
|
|
{
|
|
return __raw_readl(debug_port_base + off);
|
|
}
|
|
|
|
static void debug_port_init(void)
|
|
{
|
|
/* reset everything */
|
|
msm_write(UART_CR_CMD_RESET_RX, UART_CR);
|
|
msm_write(UART_CR_CMD_RESET_TX, UART_CR);
|
|
msm_write(UART_CR_CMD_RESET_ERR, UART_CR);
|
|
msm_write(UART_CR_CMD_RESET_BREAK_INT, UART_CR);
|
|
msm_write(UART_CR_CMD_RESET_CTS, UART_CR);
|
|
msm_write(UART_CR_CMD_SET_RFR, UART_CR);
|
|
|
|
/* setup clock dividers */
|
|
if (clk_get_rate(debug_clk) == 19200000) {
|
|
/* clock is TCXO (19.2MHz) */
|
|
msm_write(0x06, UART_MREG);
|
|
msm_write(0xF1, UART_NREG);
|
|
msm_write(0x0F, UART_DREG);
|
|
msm_write(0x1A, UART_MNDREG);
|
|
} else {
|
|
/* clock must be TCXO/4 */
|
|
msm_write(0x18, UART_MREG);
|
|
msm_write(0xF6, UART_NREG);
|
|
msm_write(0x0F, UART_DREG);
|
|
msm_write(0x0A, UART_MNDREG);
|
|
}
|
|
|
|
msm_write(UART_CSR_115200, UART_CSR);
|
|
|
|
/* rx interrupt on every character -- keep it simple */
|
|
msm_write(0, UART_RFWR);
|
|
|
|
/* enable TX and RX */
|
|
msm_write(0x05, UART_CR);
|
|
|
|
/* enable RX interrupt */
|
|
msm_write(UART_IMR_RXLEV, UART_IMR);
|
|
}
|
|
|
|
static inline int debug_getc(void)
|
|
{
|
|
if (msm_read(UART_SR) & UART_SR_RX_READY) {
|
|
return msm_read(UART_RF);
|
|
} else {
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
static inline void debug_putc(unsigned int c)
|
|
{
|
|
while (!(msm_read(UART_SR) & UART_SR_TX_READY)) ;
|
|
msm_write(c, UART_TF);
|
|
}
|
|
|
|
static inline void debug_flush(void)
|
|
{
|
|
while (!(msm_read(UART_SR) & UART_SR_TX_EMPTY)) ;
|
|
}
|
|
|
|
static void debug_puts(char *s)
|
|
{
|
|
unsigned c;
|
|
while ((c = *s++)) {
|
|
if (c == '\n')
|
|
debug_putc('\r');
|
|
debug_putc(c);
|
|
}
|
|
}
|
|
|
|
static void debug_prompt(void)
|
|
{
|
|
debug_puts("debug> ");
|
|
}
|
|
|
|
int log_buf_copy(char *dest, int idx, int len);
|
|
static void dump_kernel_log(void)
|
|
{
|
|
char buf[1024];
|
|
int idx = 0;
|
|
int ret;
|
|
int saved_oip;
|
|
|
|
/* setting oops_in_progress prevents log_buf_copy()
|
|
* from trying to take a spinlock which will make it
|
|
* very unhappy in some cases...
|
|
*/
|
|
saved_oip = oops_in_progress;
|
|
oops_in_progress = 1;
|
|
for (;;) {
|
|
ret = log_buf_copy(buf, idx, 1023);
|
|
if (ret <= 0)
|
|
break;
|
|
buf[ret] = 0;
|
|
debug_puts(buf);
|
|
idx += ret;
|
|
}
|
|
oops_in_progress = saved_oip;
|
|
}
|
|
|
|
static char *mode_name(unsigned cpsr)
|
|
{
|
|
switch (cpsr & MODE_MASK) {
|
|
case USR_MODE: return "USR";
|
|
case FIQ_MODE: return "FIQ";
|
|
case IRQ_MODE: return "IRQ";
|
|
case SVC_MODE: return "SVC";
|
|
case ABT_MODE: return "ABT";
|
|
case UND_MODE: return "UND";
|
|
case SYSTEM_MODE: return "SYS";
|
|
default: return "???";
|
|
}
|
|
}
|
|
|
|
#define DEBUG_MAX 64
|
|
static char debug_cmd[DEBUG_MAX];
|
|
static int debug_busy;
|
|
static int debug_abort;
|
|
|
|
static int debug_printf(void *cookie, const char *fmt, ...)
|
|
{
|
|
char buf[256];
|
|
va_list ap;
|
|
|
|
va_start(ap, fmt);
|
|
vsnprintf(buf, 128, fmt, ap);
|
|
va_end(ap);
|
|
|
|
debug_puts(buf);
|
|
return debug_abort;
|
|
}
|
|
|
|
/* Safe outside fiq context */
|
|
static int debug_printf_nfiq(void *cookie, const char *fmt, ...)
|
|
{
|
|
char buf[256];
|
|
va_list ap;
|
|
unsigned long irq_flags;
|
|
|
|
va_start(ap, fmt);
|
|
vsnprintf(buf, 128, fmt, ap);
|
|
va_end(ap);
|
|
|
|
local_irq_save(irq_flags);
|
|
debug_puts(buf);
|
|
debug_flush();
|
|
local_irq_restore(irq_flags);
|
|
return debug_abort;
|
|
}
|
|
|
|
#define dprintf(fmt...) debug_printf(0, fmt)
|
|
|
|
unsigned int last_irqs[NR_IRQS];
|
|
|
|
static void dump_irqs(void)
|
|
{
|
|
int n;
|
|
dprintf("irqnr total since-last status name\n");
|
|
for (n = 1; n < NR_IRQS; n++) {
|
|
struct irqaction *act = irq_desc[n].action;
|
|
if (!act && !kstat_cpu(0).irqs[n])
|
|
continue;
|
|
dprintf("%5d: %10u %11u %8x %s\n", n,
|
|
kstat_cpu(0).irqs[n],
|
|
kstat_cpu(0).irqs[n] - last_irqs[n],
|
|
irq_desc[n].status,
|
|
(act && act->name) ? act->name : "???");
|
|
last_irqs[n] = kstat_cpu(0).irqs[n];
|
|
}
|
|
}
|
|
|
|
static void debug_exec(const char *cmd, unsigned *regs)
|
|
{
|
|
if (!strcmp(cmd, "pc")) {
|
|
dprintf(" pc %08x cpsr %08x mode %s\n",
|
|
regs[15], regs[16], mode_name(regs[16]));
|
|
} else if (!strcmp(cmd, "regs")) {
|
|
dprintf(" r0 %08x r1 %08x r2 %08x r3 %08x\n",
|
|
regs[0], regs[1], regs[2], regs[3]);
|
|
dprintf(" r4 %08x r5 %08x r6 %08x r7 %08x\n",
|
|
regs[4], regs[5], regs[6], regs[7]);
|
|
dprintf(" r8 %08x r9 %08x r10 %08x r11 %08x mode %s\n",
|
|
regs[8], regs[9], regs[10], regs[11],
|
|
mode_name(regs[16]));
|
|
dprintf(" ip %08x sp %08x lr %08x pc %08x cpsr %08x\n",
|
|
regs[10], regs[13], regs[14], regs[15], regs[16]);
|
|
} else if (!strcmp(cmd, "reboot")) {
|
|
if (msm_hw_reset_hook)
|
|
msm_hw_reset_hook();
|
|
} else if (!strcmp(cmd, "irqs")) {
|
|
dump_irqs();
|
|
} else if (!strcmp(cmd, "kmsg")) {
|
|
dump_kernel_log();
|
|
} else if (!strcmp(cmd, "version")) {
|
|
dprintf("%s\n", linux_banner);
|
|
} else {
|
|
if (debug_busy) {
|
|
dprintf("command processor busy. trying to abort.\n");
|
|
debug_abort = -1;
|
|
} else {
|
|
strcpy(debug_cmd, cmd);
|
|
debug_busy = 1;
|
|
}
|
|
msm_trigger_irq(debug_signal_irq);
|
|
return;
|
|
}
|
|
debug_prompt();
|
|
}
|
|
|
|
static irqreturn_t debug_irq(int irq, void *dev)
|
|
{
|
|
if (debug_busy) {
|
|
struct kdbg_ctxt ctxt;
|
|
|
|
ctxt.printf = debug_printf_nfiq;
|
|
kernel_debugger(&ctxt, debug_cmd);
|
|
debug_prompt();
|
|
|
|
debug_busy = 0;
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static char debug_buf[DEBUG_MAX];
|
|
static int debug_count;
|
|
|
|
static void debug_fiq(void *data, void *regs)
|
|
{
|
|
int c;
|
|
static int last_c;
|
|
|
|
while ((c = debug_getc()) != -1) {
|
|
if (!debug_enable) {
|
|
if ((c == 13) || (c == 10)) {
|
|
debug_enable = true;
|
|
debug_count = 0;
|
|
debug_prompt();
|
|
}
|
|
} else if ((c >= ' ') && (c < 127)) {
|
|
if (debug_count < (DEBUG_MAX - 1)) {
|
|
debug_buf[debug_count++] = c;
|
|
debug_putc(c);
|
|
}
|
|
} else if ((c == 8) || (c == 127)) {
|
|
if (debug_count > 0) {
|
|
debug_count--;
|
|
debug_putc(8);
|
|
debug_putc(' ');
|
|
debug_putc(8);
|
|
}
|
|
} else if ((c == 13) || (c == 10)) {
|
|
if (c == '\r' || (c == '\n' && last_c != '\r')) {
|
|
debug_putc('\r');
|
|
debug_putc('\n');
|
|
}
|
|
if (debug_count) {
|
|
debug_buf[debug_count] = 0;
|
|
debug_count = 0;
|
|
debug_exec(debug_buf, regs);
|
|
} else {
|
|
debug_prompt();
|
|
}
|
|
}
|
|
last_c = c;
|
|
}
|
|
debug_flush();
|
|
}
|
|
|
|
#if defined(CONFIG_MSM_SERIAL_DEBUGGER_CONSOLE)
|
|
static void debug_console_write(struct console *co,
|
|
const char *s, unsigned int count)
|
|
{
|
|
unsigned long irq_flags;
|
|
|
|
/* disable irq's while TXing outside of FIQ context */
|
|
local_irq_save(irq_flags);
|
|
while (count--) {
|
|
if (*s == '\n')
|
|
debug_putc('\r');
|
|
debug_putc(*s++);
|
|
}
|
|
debug_flush();
|
|
local_irq_restore(irq_flags);
|
|
}
|
|
|
|
static struct console msm_serial_debug_console = {
|
|
.name = "debug_console",
|
|
.write = debug_console_write,
|
|
.flags = CON_PRINTBUFFER | CON_ANYTIME | CON_ENABLED,
|
|
};
|
|
#endif
|
|
|
|
void msm_serial_debug_enable(int enable) {
|
|
debug_enable = enable;
|
|
}
|
|
|
|
void msm_serial_debug_init(unsigned int base, int irq,
|
|
struct device *clk_device, int signal_irq)
|
|
{
|
|
int ret;
|
|
void *port;
|
|
|
|
debug_clk = clk_get(clk_device, "uart_clk");
|
|
if (debug_clk)
|
|
clk_enable(debug_clk);
|
|
|
|
port = ioremap(base, 4096);
|
|
if (!port)
|
|
return;
|
|
|
|
init_data.base = base;
|
|
init_data.irq = irq;
|
|
init_data.clk_device = clk_device;
|
|
init_data.signal_irq = signal_irq;
|
|
debug_port_base = (unsigned int) port;
|
|
debug_signal_irq = signal_irq;
|
|
debug_port_init();
|
|
|
|
debug_prompt();
|
|
|
|
msm_fiq_select(irq);
|
|
msm_fiq_set_handler(debug_fiq, 0);
|
|
msm_fiq_enable(irq);
|
|
|
|
ret = request_irq(signal_irq, debug_irq,
|
|
IRQF_TRIGGER_RISING, "debug", 0);
|
|
if (ret)
|
|
printk(KERN_ERR
|
|
"serial_debugger: could not install signal_irq");
|
|
|
|
#if defined(CONFIG_MSM_SERIAL_DEBUGGER_CONSOLE)
|
|
register_console(&msm_serial_debug_console);
|
|
#endif
|
|
debugger_enable = 1;
|
|
}
|
|
static int msm_serial_debug_remove(const char *val, struct kernel_param *kp)
|
|
{
|
|
int ret;
|
|
static int pre_stat = 1;
|
|
ret = param_set_bool(val, kp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (pre_stat == *(int *)kp->arg)
|
|
return 0;
|
|
|
|
pre_stat = *(int *)kp->arg;
|
|
|
|
if (*(int *)kp->arg) {
|
|
msm_serial_debug_init(init_data.base, init_data.irq,
|
|
init_data.clk_device, init_data.signal_irq);
|
|
printk(KERN_INFO "enable FIQ serial debugger\n");
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_MSM_SERIAL_DEBUGGER_CONSOLE)
|
|
unregister_console(&msm_serial_debug_console);
|
|
#endif
|
|
free_irq(init_data.signal_irq, 0);
|
|
msm_fiq_set_handler(NULL, 0);
|
|
msm_fiq_disable(init_data.irq);
|
|
msm_fiq_unselect(init_data.irq);
|
|
clk_disable(debug_clk);
|
|
printk(KERN_INFO "disable FIQ serial debugger\n");
|
|
return 0;
|
|
}
|
|
module_param_call(enable, msm_serial_debug_remove, param_get_bool,
|
|
&debugger_enable, S_IWUSR | S_IRUGO);
|