dsa/mv88e6060: support nonzero mii base address

The mv88e6060 uses either the lower 16 or upper 16 mii addresses,
depending on the value of the EE_CLK/ADDR4 pin. Support both
configurations by using the sw_addr setting as base address.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Peter Korsgaard 2011-03-07 05:49:47 +00:00 committed by David S. Miller
parent c01c6af84e
commit fdb838cdae

View file

@ -18,7 +18,7 @@
static int reg_read(struct dsa_switch *ds, int addr, int reg)
{
return mdiobus_read(ds->master_mii_bus, addr, reg);
return mdiobus_read(ds->master_mii_bus, ds->pd->sw_addr + addr, reg);
}
#define REG_READ(addr, reg) \
@ -34,7 +34,8 @@ static int reg_read(struct dsa_switch *ds, int addr, int reg)
static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
{
return mdiobus_write(ds->master_mii_bus, addr, reg, val);
return mdiobus_write(ds->master_mii_bus, ds->pd->sw_addr + addr,
reg, val);
}
#define REG_WRITE(addr, reg, val) \
@ -50,7 +51,7 @@ static char *mv88e6060_probe(struct mii_bus *bus, int sw_addr)
{
int ret;
ret = mdiobus_read(bus, REG_PORT(0), 0x03);
ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
if (ret >= 0) {
ret &= 0xfff0;
if (ret == 0x0600)