android_kernel_samsung_msm8976/net/netfilter/xt_cluster.c

179 lines
5.0 KiB
C
Raw Permalink Normal View History

netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
/*
* (C) 2008-2009 Pablo Neira Ayuso <pablo@netfilter.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/jhash.h>
#include <linux/ip.h>
#include <net/ipv6.h>
#include <linux/netfilter/x_tables.h>
#include <net/netfilter/nf_conntrack.h>
#include <linux/netfilter/xt_cluster.h>
netfilter: fix some sparse endianess warnings net/netfilter/xt_NFQUEUE.c:46:9: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:46:9: expected unsigned int [unsigned] [usertype] ipaddr net/netfilter/xt_NFQUEUE.c:46:9: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:68:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:68:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:68:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:69:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:69:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:69:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:70:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:70:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:70:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:71:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:71:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:71:10: got restricted unsigned int net/netfilter/xt_cluster.c:20:55: warning: incorrect type in return expression (different base types) net/netfilter/xt_cluster.c:20:55: expected unsigned int net/netfilter/xt_cluster.c:20:55: got restricted unsigned int const [usertype] ip net/netfilter/xt_cluster.c:20:55: warning: incorrect type in return expression (different base types) net/netfilter/xt_cluster.c:20:55: expected unsigned int net/netfilter/xt_cluster.c:20:55: got restricted unsigned int const [usertype] ip Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-06-22 12:15:02 +00:00
static inline u32 nf_ct_orig_ipv4_src(const struct nf_conn *ct)
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
{
netfilter: fix some sparse endianess warnings net/netfilter/xt_NFQUEUE.c:46:9: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:46:9: expected unsigned int [unsigned] [usertype] ipaddr net/netfilter/xt_NFQUEUE.c:46:9: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:68:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:68:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:68:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:69:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:69:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:69:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:70:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:70:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:70:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:71:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:71:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:71:10: got restricted unsigned int net/netfilter/xt_cluster.c:20:55: warning: incorrect type in return expression (different base types) net/netfilter/xt_cluster.c:20:55: expected unsigned int net/netfilter/xt_cluster.c:20:55: got restricted unsigned int const [usertype] ip net/netfilter/xt_cluster.c:20:55: warning: incorrect type in return expression (different base types) net/netfilter/xt_cluster.c:20:55: expected unsigned int net/netfilter/xt_cluster.c:20:55: got restricted unsigned int const [usertype] ip Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-06-22 12:15:02 +00:00
return (__force u32)ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
}
netfilter: fix some sparse endianess warnings net/netfilter/xt_NFQUEUE.c:46:9: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:46:9: expected unsigned int [unsigned] [usertype] ipaddr net/netfilter/xt_NFQUEUE.c:46:9: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:68:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:68:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:68:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:69:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:69:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:69:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:70:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:70:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:70:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:71:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:71:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:71:10: got restricted unsigned int net/netfilter/xt_cluster.c:20:55: warning: incorrect type in return expression (different base types) net/netfilter/xt_cluster.c:20:55: expected unsigned int net/netfilter/xt_cluster.c:20:55: got restricted unsigned int const [usertype] ip net/netfilter/xt_cluster.c:20:55: warning: incorrect type in return expression (different base types) net/netfilter/xt_cluster.c:20:55: expected unsigned int net/netfilter/xt_cluster.c:20:55: got restricted unsigned int const [usertype] ip Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-06-22 12:15:02 +00:00
static inline const u32 *nf_ct_orig_ipv6_src(const struct nf_conn *ct)
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
{
netfilter: fix some sparse endianess warnings net/netfilter/xt_NFQUEUE.c:46:9: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:46:9: expected unsigned int [unsigned] [usertype] ipaddr net/netfilter/xt_NFQUEUE.c:46:9: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:68:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:68:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:68:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:69:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:69:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:69:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:70:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:70:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:70:10: got restricted unsigned int net/netfilter/xt_NFQUEUE.c:71:10: warning: incorrect type in assignment (different base types) net/netfilter/xt_NFQUEUE.c:71:10: expected unsigned int [unsigned] <noident> net/netfilter/xt_NFQUEUE.c:71:10: got restricted unsigned int net/netfilter/xt_cluster.c:20:55: warning: incorrect type in return expression (different base types) net/netfilter/xt_cluster.c:20:55: expected unsigned int net/netfilter/xt_cluster.c:20:55: got restricted unsigned int const [usertype] ip net/netfilter/xt_cluster.c:20:55: warning: incorrect type in return expression (different base types) net/netfilter/xt_cluster.c:20:55: expected unsigned int net/netfilter/xt_cluster.c:20:55: got restricted unsigned int const [usertype] ip Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-06-22 12:15:02 +00:00
return (__force u32 *)ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6;
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
}
static inline u_int32_t
xt_cluster_hash_ipv4(u_int32_t ip, const struct xt_cluster_match_info *info)
{
return jhash_1word(ip, info->hash_seed);
}
static inline u_int32_t
xt_cluster_hash_ipv6(const void *ip, const struct xt_cluster_match_info *info)
{
return jhash2(ip, NF_CT_TUPLE_L3SIZE / sizeof(__u32), info->hash_seed);
}
static inline u_int32_t
xt_cluster_hash(const struct nf_conn *ct,
const struct xt_cluster_match_info *info)
{
u_int32_t hash = 0;
switch(nf_ct_l3num(ct)) {
case AF_INET:
hash = xt_cluster_hash_ipv4(nf_ct_orig_ipv4_src(ct), info);
break;
case AF_INET6:
hash = xt_cluster_hash_ipv6(nf_ct_orig_ipv6_src(ct), info);
break;
default:
WARN_ON(1);
break;
}
return (((u64)hash * info->total_nodes) >> 32);
}
static inline bool
xt_cluster_ipv6_is_multicast(const struct in6_addr *addr)
{
__be32 st = addr->s6_addr32[0];
return ((st & htonl(0xFF000000)) == htonl(0xFF000000));
}
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
static inline bool
xt_cluster_is_multicast_addr(const struct sk_buff *skb, u_int8_t family)
{
bool is_multicast = false;
switch(family) {
case NFPROTO_IPV4:
is_multicast = ipv4_is_multicast(ip_hdr(skb)->daddr);
break;
case NFPROTO_IPV6:
is_multicast =
xt_cluster_ipv6_is_multicast(&ipv6_hdr(skb)->daddr);
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
break;
default:
WARN_ON(1);
break;
}
return is_multicast;
}
static bool
xt_cluster_mt(const struct sk_buff *skb, struct xt_action_param *par)
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
{
struct sk_buff *pskb = (struct sk_buff *)skb;
const struct xt_cluster_match_info *info = par->matchinfo;
const struct nf_conn *ct;
enum ip_conntrack_info ctinfo;
unsigned long hash;
/* This match assumes that all nodes see the same packets. This can be
* achieved if the switch that connects the cluster nodes support some
* sort of 'port mirroring'. However, if your switch does not support
* this, your cluster nodes can reply ARP request using a multicast MAC
* address. Thus, your switch will flood the same packets to the
* cluster nodes with the same multicast MAC address. Using a multicast
* link address is a RFC 1812 (section 3.3.2) violation, but this works
* fine in practise.
*
* Unfortunately, if you use the multicast MAC address, the link layer
* sets skbuff's pkt_type to PACKET_MULTICAST, which is not accepted
* by TCP and others for packets coming to this node. For that reason,
* this match mangles skbuff's pkt_type if it detects a packet
* addressed to a unicast address but using PACKET_MULTICAST. Yes, I
* know, matches should not alter packets, but we are doing this here
* because we would need to add a PKTTYPE target for this sole purpose.
*/
if (!xt_cluster_is_multicast_addr(skb, par->family) &&
skb->pkt_type == PACKET_MULTICAST) {
pskb->pkt_type = PACKET_HOST;
}
ct = nf_ct_get(skb, &ctinfo);
if (ct == NULL)
return false;
if (nf_ct_is_untracked(ct))
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
return false;
if (ct->master)
hash = xt_cluster_hash(ct->master, info);
else
hash = xt_cluster_hash(ct, info);
return !!((1 << hash) & info->node_mask) ^
!!(info->flags & XT_CLUSTER_F_INV);
}
static int xt_cluster_mt_checkentry(const struct xt_mtchk_param *par)
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
{
struct xt_cluster_match_info *info = par->matchinfo;
if (info->total_nodes > XT_CLUSTER_NODES_MAX) {
pr_info("you have exceeded the maximum "
"number of cluster nodes (%u > %u)\n",
info->total_nodes, XT_CLUSTER_NODES_MAX);
return -EINVAL;
}
if (info->node_mask >= (1ULL << info->total_nodes)) {
pr_info("this node mask cannot be "
"higher than the total number of nodes\n");
return -EDOM;
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
}
return 0;
netfilter: xtables: add cluster match This patch adds the iptables cluster match. This match can be used to deploy gateway and back-end load-sharing clusters. The cluster can be composed of 32 nodes maximum (although I have only tested this with two nodes, so I cannot tell what is the real scalability limit of this solution in terms of cluster nodes). Assuming that all the nodes see all packets (see below for an example on how to do that if your switch does not allow this), the cluster match decides if this node has to handle a packet given: (jhash(source IP) % total_nodes) & node_mask For related connections, the master conntrack is used. The following is an example of its use to deploy a gateway cluster composed of two nodes (where this is the node 1): iptables -I PREROUTING -t mangle -i eth1 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth1 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth1 \ -m mark ! --mark 0xffff -j DROP iptables -A PREROUTING -t mangle -i eth2 -m cluster \ --cluster-total-nodes 2 --cluster-local-node 1 \ --cluster-proc-name eth2 -j MARK --set-mark 0xffff iptables -A PREROUTING -t mangle -i eth2 \ -m mark ! --mark 0xffff -j DROP And the following commands to make all nodes see the same packets: ip maddr add 01:00:5e:00:01:01 dev eth1 ip maddr add 01:00:5e:00:01:02 dev eth2 arptables -I OUTPUT -o eth1 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:01 arptables -I INPUT -i eth1 --h-length 6 \ --destination-mac 01:00:5e:00:01:01 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 arptables -I OUTPUT -o eth2 --h-length 6 \ -j mangle --mangle-mac-s 01:00:5e:00:01:02 arptables -I INPUT -i eth2 --h-length 6 \ --destination-mac 01:00:5e:00:01:02 \ -j mangle --mangle-mac-d 00:zz:yy:xx:5a:27 In the case of TCP connections, pickup facility has to be disabled to avoid marking TCP ACK packets coming in the reply direction as valid. echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose BTW, some final notes: * This match mangles the skbuff pkt_type in case that it detects PACKET_MULTICAST for a non-multicast address. This may be done in a PKTTYPE target for this sole purpose. * This match supersedes the CLUSTERIP target. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16 16:10:36 +00:00
}
static struct xt_match xt_cluster_match __read_mostly = {
.name = "cluster",
.family = NFPROTO_UNSPEC,
.match = xt_cluster_mt,
.checkentry = xt_cluster_mt_checkentry,
.matchsize = sizeof(struct xt_cluster_match_info),
.me = THIS_MODULE,
};
static int __init xt_cluster_mt_init(void)
{
return xt_register_match(&xt_cluster_match);
}
static void __exit xt_cluster_mt_fini(void)
{
xt_unregister_match(&xt_cluster_match);
}
MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Xtables: hash-based cluster match");
MODULE_ALIAS("ipt_cluster");
MODULE_ALIAS("ip6t_cluster");
module_init(xt_cluster_mt_init);
module_exit(xt_cluster_mt_fini);