android_kernel_samsung_msm8976/net/tipc/link.c

2996 lines
79 KiB
C
Raw Permalink Normal View History

/*
* net/tipc/link.c: TIPC link code
*
tipc: introduce message to synchronize broadcast link Upon establishing a first link between two nodes, there is currently a risk that the two endpoints will disagree on exactly which sequence number reception and acknowleding of broadcast packets should start. The following scenarios may happen: 1: Node A sends an ACTIVATE message to B, telling it to start acking packets from sequence number N. 2: Node A sends out broadcast N, but does not expect an acknowledge from B, since B is not yet in its broadcast receiver's list. 3: Node A receives ACK for N from all nodes except B, and releases packet N. 4: Node B receives the ACTIVATE, activates its link endpoint, and stores the value N as sequence number of first expected packet. 5: Node B sends a NAME_DISTR message to A. 6: Node A receives the NAME_DISTR message, and activates its endpoint. At this moment B is added to A's broadcast receiver's set. Node A also sets sequence number 0 as the first broadcast packet to be received from B. 7: Node A sends broadcast N+1. 8: B receives N+1, determines there is a gap in the sequence, since it is expecting N, and sends a NACK for N back to A. 9: Node A has already released N, so no retransmission is possible. The broadcast link in direction A->B is stale. In addition to, or instead of, 7-9 above, the following may happen: 10: Node B sends broadcast M > 0 to A. 11: Node A receives M, falsely decides there must be a gap, since it is expecting packet 0, and asks for retransmission of packets [0,M-1]. 12: Node B has already released these packets, so the broadcast link is stale in direction B->A. We solve this problem by introducing a new unicast message type, BCAST_PROTOCOL/STATE, to convey the sequence number of the next sent broadcast packet to the other endpoint, at exactly the moment that endpoint is added to the own node's broadcast receivers list, and before any other unicast messages are permitted to be sent. Furthermore, we don't allow any node to start receiving and processing broadcast packets until this new synchronization message has been received. To maintain backwards compatibility, we still open up for broadcast reception if we receive a NAME_DISTR message without any preceding broadcast sync message. In this case, we must assume that the other end has an older code version, and will never send out the new synchronization message. Hence, for mixed old and new nodes, the issue arising in 7-12 of the above may happen with the same probability as before. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-16 05:51:31 +00:00
* Copyright (c) 1996-2007, 2012, Ericsson AB
* Copyright (c) 2004-2007, 2010-2011, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include "core.h"
#include "link.h"
#include "port.h"
#include "name_distr.h"
#include "discover.h"
#include "config.h"
/*
* Error message prefixes
*/
static const char *link_co_err = "Link changeover error, ";
static const char *link_rst_msg = "Resetting link ";
static const char *link_unk_evt = "Unknown link event ";
/*
* Out-of-range value for link session numbers
*/
#define INVALID_SESSION 0x10000
/*
* Link state events:
*/
#define STARTING_EVT 856384768 /* link processing trigger */
#define TRAFFIC_MSG_EVT 560815u /* rx'd ??? */
#define TIMEOUT_EVT 560817u /* link timer expired */
/*
* The following two 'message types' is really just implementation
* data conveniently stored in the message header.
* They must not be considered part of the protocol
*/
#define OPEN_MSG 0
#define CLOSED_MSG 1
/*
* State value stored in 'exp_msg_count'
*/
#define START_CHANGEOVER 100000u
/**
* struct tipc_link_name - deconstructed link name
* @addr_local: network address of node at this end
* @if_local: name of interface at this end
* @addr_peer: network address of node at far end
* @if_peer: name of interface at far end
*/
struct tipc_link_name {
u32 addr_local;
char if_local[TIPC_MAX_IF_NAME];
u32 addr_peer;
char if_peer[TIPC_MAX_IF_NAME];
};
static void link_handle_out_of_seq_msg(struct tipc_link *l_ptr,
struct sk_buff *buf);
static void link_recv_proto_msg(struct tipc_link *l_ptr, struct sk_buff *buf);
static int link_recv_changeover_msg(struct tipc_link **l_ptr,
struct sk_buff **buf);
static void link_set_supervision_props(struct tipc_link *l_ptr, u32 tolerance);
static int link_send_sections_long(struct tipc_port *sender,
struct iovec const *msg_sect,
u32 num_sect, unsigned int total_len,
u32 destnode);
static void link_state_event(struct tipc_link *l_ptr, u32 event);
static void link_reset_statistics(struct tipc_link *l_ptr);
static void link_print(struct tipc_link *l_ptr, const char *str);
static void link_start(struct tipc_link *l_ptr);
static int link_send_long_buf(struct tipc_link *l_ptr, struct sk_buff *buf);
tipc: introduce message to synchronize broadcast link Upon establishing a first link between two nodes, there is currently a risk that the two endpoints will disagree on exactly which sequence number reception and acknowleding of broadcast packets should start. The following scenarios may happen: 1: Node A sends an ACTIVATE message to B, telling it to start acking packets from sequence number N. 2: Node A sends out broadcast N, but does not expect an acknowledge from B, since B is not yet in its broadcast receiver's list. 3: Node A receives ACK for N from all nodes except B, and releases packet N. 4: Node B receives the ACTIVATE, activates its link endpoint, and stores the value N as sequence number of first expected packet. 5: Node B sends a NAME_DISTR message to A. 6: Node A receives the NAME_DISTR message, and activates its endpoint. At this moment B is added to A's broadcast receiver's set. Node A also sets sequence number 0 as the first broadcast packet to be received from B. 7: Node A sends broadcast N+1. 8: B receives N+1, determines there is a gap in the sequence, since it is expecting N, and sends a NACK for N back to A. 9: Node A has already released N, so no retransmission is possible. The broadcast link in direction A->B is stale. In addition to, or instead of, 7-9 above, the following may happen: 10: Node B sends broadcast M > 0 to A. 11: Node A receives M, falsely decides there must be a gap, since it is expecting packet 0, and asks for retransmission of packets [0,M-1]. 12: Node B has already released these packets, so the broadcast link is stale in direction B->A. We solve this problem by introducing a new unicast message type, BCAST_PROTOCOL/STATE, to convey the sequence number of the next sent broadcast packet to the other endpoint, at exactly the moment that endpoint is added to the own node's broadcast receivers list, and before any other unicast messages are permitted to be sent. Furthermore, we don't allow any node to start receiving and processing broadcast packets until this new synchronization message has been received. To maintain backwards compatibility, we still open up for broadcast reception if we receive a NAME_DISTR message without any preceding broadcast sync message. In this case, we must assume that the other end has an older code version, and will never send out the new synchronization message. Hence, for mixed old and new nodes, the issue arising in 7-12 of the above may happen with the same probability as before. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-16 05:51:31 +00:00
static void tipc_link_send_sync(struct tipc_link *l);
static void tipc_link_recv_sync(struct tipc_node *n, struct sk_buff *buf);
/*
* Simple link routines
*/
static unsigned int align(unsigned int i)
{
return (i + 3) & ~3u;
}
static void link_init_max_pkt(struct tipc_link *l_ptr)
{
u32 max_pkt;
max_pkt = (l_ptr->b_ptr->mtu & ~3);
if (max_pkt > MAX_MSG_SIZE)
max_pkt = MAX_MSG_SIZE;
l_ptr->max_pkt_target = max_pkt;
if (l_ptr->max_pkt_target < MAX_PKT_DEFAULT)
l_ptr->max_pkt = l_ptr->max_pkt_target;
else
l_ptr->max_pkt = MAX_PKT_DEFAULT;
l_ptr->max_pkt_probes = 0;
}
static u32 link_next_sent(struct tipc_link *l_ptr)
{
if (l_ptr->next_out)
return buf_seqno(l_ptr->next_out);
return mod(l_ptr->next_out_no);
}
static u32 link_last_sent(struct tipc_link *l_ptr)
{
return mod(link_next_sent(l_ptr) - 1);
}
/*
* Simple non-static link routines (i.e. referenced outside this file)
*/
int tipc_link_is_up(struct tipc_link *l_ptr)
{
if (!l_ptr)
return 0;
return link_working_working(l_ptr) || link_working_unknown(l_ptr);
}
int tipc_link_is_active(struct tipc_link *l_ptr)
{
return (l_ptr->owner->active_links[0] == l_ptr) ||
(l_ptr->owner->active_links[1] == l_ptr);
}
/**
* link_name_validate - validate & (optionally) deconstruct tipc_link name
* @name: ptr to link name string
* @name_parts: ptr to area for link name components (or NULL if not needed)
*
* Returns 1 if link name is valid, otherwise 0.
*/
static int link_name_validate(const char *name,
struct tipc_link_name *name_parts)
{
char name_copy[TIPC_MAX_LINK_NAME];
char *addr_local;
char *if_local;
char *addr_peer;
char *if_peer;
char dummy;
u32 z_local, c_local, n_local;
u32 z_peer, c_peer, n_peer;
u32 if_local_len;
u32 if_peer_len;
/* copy link name & ensure length is OK */
name_copy[TIPC_MAX_LINK_NAME - 1] = 0;
/* need above in case non-Posix strncpy() doesn't pad with nulls */
strncpy(name_copy, name, TIPC_MAX_LINK_NAME);
if (name_copy[TIPC_MAX_LINK_NAME - 1] != 0)
return 0;
/* ensure all component parts of link name are present */
addr_local = name_copy;
if_local = strchr(addr_local, ':');
if (if_local == NULL)
return 0;
*(if_local++) = 0;
addr_peer = strchr(if_local, '-');
if (addr_peer == NULL)
return 0;
*(addr_peer++) = 0;
if_local_len = addr_peer - if_local;
if_peer = strchr(addr_peer, ':');
if (if_peer == NULL)
return 0;
*(if_peer++) = 0;
if_peer_len = strlen(if_peer) + 1;
/* validate component parts of link name */
if ((sscanf(addr_local, "%u.%u.%u%c",
&z_local, &c_local, &n_local, &dummy) != 3) ||
(sscanf(addr_peer, "%u.%u.%u%c",
&z_peer, &c_peer, &n_peer, &dummy) != 3) ||
(z_local > 255) || (c_local > 4095) || (n_local > 4095) ||
(z_peer > 255) || (c_peer > 4095) || (n_peer > 4095) ||
(if_local_len <= 1) || (if_local_len > TIPC_MAX_IF_NAME) ||
(if_peer_len <= 1) || (if_peer_len > TIPC_MAX_IF_NAME))
return 0;
/* return link name components, if necessary */
if (name_parts) {
name_parts->addr_local = tipc_addr(z_local, c_local, n_local);
strcpy(name_parts->if_local, if_local);
name_parts->addr_peer = tipc_addr(z_peer, c_peer, n_peer);
strcpy(name_parts->if_peer, if_peer);
}
return 1;
}
/**
* link_timeout - handle expiration of link timer
* @l_ptr: pointer to link
*
* This routine must not grab "tipc_net_lock" to avoid a potential deadlock conflict
* with tipc_link_delete(). (There is no risk that the node will be deleted by
* another thread because tipc_link_delete() always cancels the link timer before
* tipc_node_delete() is called.)
*/
static void link_timeout(struct tipc_link *l_ptr)
{
tipc_node_lock(l_ptr->owner);
/* update counters used in statistical profiling of send traffic */
l_ptr->stats.accu_queue_sz += l_ptr->out_queue_size;
l_ptr->stats.queue_sz_counts++;
if (l_ptr->first_out) {
struct tipc_msg *msg = buf_msg(l_ptr->first_out);
u32 length = msg_size(msg);
if ((msg_user(msg) == MSG_FRAGMENTER) &&
(msg_type(msg) == FIRST_FRAGMENT)) {
length = msg_size(msg_get_wrapped(msg));
}
if (length) {
l_ptr->stats.msg_lengths_total += length;
l_ptr->stats.msg_length_counts++;
if (length <= 64)
l_ptr->stats.msg_length_profile[0]++;
else if (length <= 256)
l_ptr->stats.msg_length_profile[1]++;
else if (length <= 1024)
l_ptr->stats.msg_length_profile[2]++;
else if (length <= 4096)
l_ptr->stats.msg_length_profile[3]++;
else if (length <= 16384)
l_ptr->stats.msg_length_profile[4]++;
else if (length <= 32768)
l_ptr->stats.msg_length_profile[5]++;
else
l_ptr->stats.msg_length_profile[6]++;
}
}
/* do all other link processing performed on a periodic basis */
link_state_event(l_ptr, TIMEOUT_EVT);
if (l_ptr->next_out)
tipc_link_push_queue(l_ptr);
tipc_node_unlock(l_ptr->owner);
}
static void link_set_timer(struct tipc_link *l_ptr, u32 time)
{
k_start_timer(&l_ptr->timer, time);
}
/**
* tipc_link_create - create a new link
* @n_ptr: pointer to associated node
* @b_ptr: pointer to associated bearer
* @media_addr: media address to use when sending messages over link
*
* Returns pointer to link.
*/
struct tipc_link *tipc_link_create(struct tipc_node *n_ptr,
struct tipc_bearer *b_ptr,
const struct tipc_media_addr *media_addr)
{
struct tipc_link *l_ptr;
struct tipc_msg *msg;
char *if_name;
char addr_string[16];
u32 peer = n_ptr->addr;
if (n_ptr->link_cnt >= 2) {
tipc_addr_string_fill(addr_string, n_ptr->addr);
pr_err("Attempt to establish third link to %s\n", addr_string);
return NULL;
}
if (n_ptr->links[b_ptr->identity]) {
tipc_addr_string_fill(addr_string, n_ptr->addr);
pr_err("Attempt to establish second link on <%s> to %s\n",
b_ptr->name, addr_string);
return NULL;
}
l_ptr = kzalloc(sizeof(*l_ptr), GFP_ATOMIC);
if (!l_ptr) {
pr_warn("Link creation failed, no memory\n");
return NULL;
}
l_ptr->addr = peer;
if_name = strchr(b_ptr->name, ':') + 1;
sprintf(l_ptr->name, "%u.%u.%u:%s-%u.%u.%u:unknown",
tipc_zone(tipc_own_addr), tipc_cluster(tipc_own_addr),
tipc_node(tipc_own_addr),
if_name,
tipc_zone(peer), tipc_cluster(peer), tipc_node(peer));
/* note: peer i/f name is updated by reset/activate message */
memcpy(&l_ptr->media_addr, media_addr, sizeof(*media_addr));
l_ptr->owner = n_ptr;
l_ptr->checkpoint = 1;
l_ptr->peer_session = INVALID_SESSION;
l_ptr->b_ptr = b_ptr;
link_set_supervision_props(l_ptr, b_ptr->tolerance);
l_ptr->state = RESET_UNKNOWN;
l_ptr->pmsg = (struct tipc_msg *)&l_ptr->proto_msg;
msg = l_ptr->pmsg;
tipc_msg_init(msg, LINK_PROTOCOL, RESET_MSG, INT_H_SIZE, l_ptr->addr);
msg_set_size(msg, sizeof(l_ptr->proto_msg));
msg_set_session(msg, (tipc_random & 0xffff));
msg_set_bearer_id(msg, b_ptr->identity);
strcpy((char *)msg_data(msg), if_name);
l_ptr->priority = b_ptr->priority;
tipc_link_set_queue_limits(l_ptr, b_ptr->window);
link_init_max_pkt(l_ptr);
l_ptr->next_out_no = 1;
INIT_LIST_HEAD(&l_ptr->waiting_ports);
link_reset_statistics(l_ptr);
tipc_node_attach_link(n_ptr, l_ptr);
k_init_timer(&l_ptr->timer, (Handler)link_timeout, (unsigned long)l_ptr);
list_add_tail(&l_ptr->link_list, &b_ptr->links);
tipc_k_signal((Handler)link_start, (unsigned long)l_ptr);
return l_ptr;
}
/**
* tipc_link_delete - delete a link
* @l_ptr: pointer to link
*
* Note: 'tipc_net_lock' is write_locked, bearer is locked.
* This routine must not grab the node lock until after link timer cancellation
* to avoid a potential deadlock situation.
*/
void tipc_link_delete(struct tipc_link *l_ptr)
{
if (!l_ptr) {
pr_err("Attempt to delete non-existent link\n");
return;
}
k_cancel_timer(&l_ptr->timer);
tipc_node_lock(l_ptr->owner);
tipc_link_reset(l_ptr);
tipc_node_detach_link(l_ptr->owner, l_ptr);
tipc_link_stop(l_ptr);
list_del_init(&l_ptr->link_list);
tipc_node_unlock(l_ptr->owner);
k_term_timer(&l_ptr->timer);
kfree(l_ptr);
}
static void link_start(struct tipc_link *l_ptr)
{
tipc_node_lock(l_ptr->owner);
link_state_event(l_ptr, STARTING_EVT);
tipc_node_unlock(l_ptr->owner);
}
/**
* link_schedule_port - schedule port for deferred sending
* @l_ptr: pointer to link
* @origport: reference to sending port
* @sz: amount of data to be sent
*
* Schedules port for renewed sending of messages after link congestion
* has abated.
*/
static int link_schedule_port(struct tipc_link *l_ptr, u32 origport, u32 sz)
{
struct tipc_port *p_ptr;
spin_lock_bh(&tipc_port_list_lock);
p_ptr = tipc_port_lock(origport);
if (p_ptr) {
if (!p_ptr->wakeup)
goto exit;
if (!list_empty(&p_ptr->wait_list))
goto exit;
p_ptr->congested = 1;
p_ptr->waiting_pkts = 1 + ((sz - 1) / l_ptr->max_pkt);
list_add_tail(&p_ptr->wait_list, &l_ptr->waiting_ports);
l_ptr->stats.link_congs++;
exit:
tipc_port_unlock(p_ptr);
}
spin_unlock_bh(&tipc_port_list_lock);
return -ELINKCONG;
}
void tipc_link_wakeup_ports(struct tipc_link *l_ptr, int all)
{
struct tipc_port *p_ptr;
struct tipc_port *temp_p_ptr;
int win = l_ptr->queue_limit[0] - l_ptr->out_queue_size;
if (all)
win = 100000;
if (win <= 0)
return;
if (!spin_trylock_bh(&tipc_port_list_lock))
return;
if (link_congested(l_ptr))
goto exit;
list_for_each_entry_safe(p_ptr, temp_p_ptr, &l_ptr->waiting_ports,
wait_list) {
if (win <= 0)
break;
list_del_init(&p_ptr->wait_list);
spin_lock_bh(p_ptr->lock);
p_ptr->congested = 0;
p_ptr->wakeup(p_ptr);
win -= p_ptr->waiting_pkts;
spin_unlock_bh(p_ptr->lock);
}
exit:
spin_unlock_bh(&tipc_port_list_lock);
}
/**
* link_release_outqueue - purge link's outbound message queue
* @l_ptr: pointer to link
*/
static void link_release_outqueue(struct tipc_link *l_ptr)
{
struct sk_buff *buf = l_ptr->first_out;
struct sk_buff *next;
while (buf) {
next = buf->next;
kfree_skb(buf);
buf = next;
}
l_ptr->first_out = NULL;
l_ptr->out_queue_size = 0;
}
/**
* tipc_link_reset_fragments - purge link's inbound message fragments queue
* @l_ptr: pointer to link
*/
void tipc_link_reset_fragments(struct tipc_link *l_ptr)
{
struct sk_buff *buf = l_ptr->defragm_buf;
struct sk_buff *next;
while (buf) {
next = buf->next;
kfree_skb(buf);
buf = next;
}
l_ptr->defragm_buf = NULL;
}
/**
* tipc_link_stop - purge all inbound and outbound messages associated with link
* @l_ptr: pointer to link
*/
void tipc_link_stop(struct tipc_link *l_ptr)
{
struct sk_buff *buf;
struct sk_buff *next;
buf = l_ptr->oldest_deferred_in;
while (buf) {
next = buf->next;
kfree_skb(buf);
buf = next;
}
buf = l_ptr->first_out;
while (buf) {
next = buf->next;
kfree_skb(buf);
buf = next;
}
tipc_link_reset_fragments(l_ptr);
kfree_skb(l_ptr->proto_msg_queue);
l_ptr->proto_msg_queue = NULL;
}
void tipc_link_reset(struct tipc_link *l_ptr)
{
struct sk_buff *buf;
u32 prev_state = l_ptr->state;
u32 checkpoint = l_ptr->next_in_no;
int was_active_link = tipc_link_is_active(l_ptr);
msg_set_session(l_ptr->pmsg, ((msg_session(l_ptr->pmsg) + 1) & 0xffff));
/* Link is down, accept any session */
l_ptr->peer_session = INVALID_SESSION;
/* Prepare for max packet size negotiation */
link_init_max_pkt(l_ptr);
l_ptr->state = RESET_UNKNOWN;
if ((prev_state == RESET_UNKNOWN) || (prev_state == RESET_RESET))
return;
tipc_node_link_down(l_ptr->owner, l_ptr);
tipc_bearer_remove_dest(l_ptr->b_ptr, l_ptr->addr);
if (was_active_link && tipc_node_active_links(l_ptr->owner) &&
l_ptr->owner->permit_changeover) {
l_ptr->reset_checkpoint = checkpoint;
l_ptr->exp_msg_count = START_CHANGEOVER;
}
/* Clean up all queues: */
link_release_outqueue(l_ptr);
kfree_skb(l_ptr->proto_msg_queue);
l_ptr->proto_msg_queue = NULL;
buf = l_ptr->oldest_deferred_in;
while (buf) {
struct sk_buff *next = buf->next;
kfree_skb(buf);
buf = next;
}
if (!list_empty(&l_ptr->waiting_ports))
tipc_link_wakeup_ports(l_ptr, 1);
l_ptr->retransm_queue_head = 0;
l_ptr->retransm_queue_size = 0;
l_ptr->last_out = NULL;
l_ptr->first_out = NULL;
l_ptr->next_out = NULL;
l_ptr->unacked_window = 0;
l_ptr->checkpoint = 1;
l_ptr->next_out_no = 1;
l_ptr->deferred_inqueue_sz = 0;
l_ptr->oldest_deferred_in = NULL;
l_ptr->newest_deferred_in = NULL;
l_ptr->fsm_msg_cnt = 0;
l_ptr->stale_count = 0;
link_reset_statistics(l_ptr);
}
static void link_activate(struct tipc_link *l_ptr)
{
l_ptr->next_in_no = l_ptr->stats.recv_info = 1;
tipc_node_link_up(l_ptr->owner, l_ptr);
tipc_bearer_add_dest(l_ptr->b_ptr, l_ptr->addr);
}
/**
* link_state_event - link finite state machine
* @l_ptr: pointer to link
* @event: state machine event to process
*/
static void link_state_event(struct tipc_link *l_ptr, unsigned int event)
{
struct tipc_link *other;
u32 cont_intv = l_ptr->continuity_interval;
if (!l_ptr->started && (event != STARTING_EVT))
return; /* Not yet. */
if (link_blocked(l_ptr)) {
if (event == TIMEOUT_EVT)
link_set_timer(l_ptr, cont_intv);
return; /* Changeover going on */
}
switch (l_ptr->state) {
case WORKING_WORKING:
switch (event) {
case TRAFFIC_MSG_EVT:
case ACTIVATE_MSG:
break;
case TIMEOUT_EVT:
if (l_ptr->next_in_no != l_ptr->checkpoint) {
l_ptr->checkpoint = l_ptr->next_in_no;
if (tipc_bclink_acks_missing(l_ptr->owner)) {
tipc_link_send_proto_msg(l_ptr, STATE_MSG,
0, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
} else if (l_ptr->max_pkt < l_ptr->max_pkt_target) {
tipc_link_send_proto_msg(l_ptr, STATE_MSG,
1, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
}
link_set_timer(l_ptr, cont_intv);
break;
}
l_ptr->state = WORKING_UNKNOWN;
l_ptr->fsm_msg_cnt = 0;
tipc_link_send_proto_msg(l_ptr, STATE_MSG, 1, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
link_set_timer(l_ptr, cont_intv / 4);
break;
case RESET_MSG:
pr_info("%s<%s>, requested by peer\n", link_rst_msg,
l_ptr->name);
tipc_link_reset(l_ptr);
l_ptr->state = RESET_RESET;
l_ptr->fsm_msg_cnt = 0;
tipc_link_send_proto_msg(l_ptr, ACTIVATE_MSG, 0, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
link_set_timer(l_ptr, cont_intv);
break;
default:
pr_err("%s%u in WW state\n", link_unk_evt, event);
}
break;
case WORKING_UNKNOWN:
switch (event) {
case TRAFFIC_MSG_EVT:
case ACTIVATE_MSG:
l_ptr->state = WORKING_WORKING;
l_ptr->fsm_msg_cnt = 0;
link_set_timer(l_ptr, cont_intv);
break;
case RESET_MSG:
pr_info("%s<%s>, requested by peer while probing\n",
link_rst_msg, l_ptr->name);
tipc_link_reset(l_ptr);
l_ptr->state = RESET_RESET;
l_ptr->fsm_msg_cnt = 0;
tipc_link_send_proto_msg(l_ptr, ACTIVATE_MSG, 0, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
link_set_timer(l_ptr, cont_intv);
break;
case TIMEOUT_EVT:
if (l_ptr->next_in_no != l_ptr->checkpoint) {
l_ptr->state = WORKING_WORKING;
l_ptr->fsm_msg_cnt = 0;
l_ptr->checkpoint = l_ptr->next_in_no;
if (tipc_bclink_acks_missing(l_ptr->owner)) {
tipc_link_send_proto_msg(l_ptr, STATE_MSG,
0, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
}
link_set_timer(l_ptr, cont_intv);
} else if (l_ptr->fsm_msg_cnt < l_ptr->abort_limit) {
tipc_link_send_proto_msg(l_ptr, STATE_MSG,
1, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
link_set_timer(l_ptr, cont_intv / 4);
} else { /* Link has failed */
pr_warn("%s<%s>, peer not responding\n",
link_rst_msg, l_ptr->name);
tipc_link_reset(l_ptr);
l_ptr->state = RESET_UNKNOWN;
l_ptr->fsm_msg_cnt = 0;
tipc_link_send_proto_msg(l_ptr, RESET_MSG,
0, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
link_set_timer(l_ptr, cont_intv);
}
break;
default:
pr_err("%s%u in WU state\n", link_unk_evt, event);
}
break;
case RESET_UNKNOWN:
switch (event) {
case TRAFFIC_MSG_EVT:
break;
case ACTIVATE_MSG:
other = l_ptr->owner->active_links[0];
if (other && link_working_unknown(other))
break;
l_ptr->state = WORKING_WORKING;
l_ptr->fsm_msg_cnt = 0;
link_activate(l_ptr);
tipc_link_send_proto_msg(l_ptr, STATE_MSG, 1, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
tipc: introduce message to synchronize broadcast link Upon establishing a first link between two nodes, there is currently a risk that the two endpoints will disagree on exactly which sequence number reception and acknowleding of broadcast packets should start. The following scenarios may happen: 1: Node A sends an ACTIVATE message to B, telling it to start acking packets from sequence number N. 2: Node A sends out broadcast N, but does not expect an acknowledge from B, since B is not yet in its broadcast receiver's list. 3: Node A receives ACK for N from all nodes except B, and releases packet N. 4: Node B receives the ACTIVATE, activates its link endpoint, and stores the value N as sequence number of first expected packet. 5: Node B sends a NAME_DISTR message to A. 6: Node A receives the NAME_DISTR message, and activates its endpoint. At this moment B is added to A's broadcast receiver's set. Node A also sets sequence number 0 as the first broadcast packet to be received from B. 7: Node A sends broadcast N+1. 8: B receives N+1, determines there is a gap in the sequence, since it is expecting N, and sends a NACK for N back to A. 9: Node A has already released N, so no retransmission is possible. The broadcast link in direction A->B is stale. In addition to, or instead of, 7-9 above, the following may happen: 10: Node B sends broadcast M > 0 to A. 11: Node A receives M, falsely decides there must be a gap, since it is expecting packet 0, and asks for retransmission of packets [0,M-1]. 12: Node B has already released these packets, so the broadcast link is stale in direction B->A. We solve this problem by introducing a new unicast message type, BCAST_PROTOCOL/STATE, to convey the sequence number of the next sent broadcast packet to the other endpoint, at exactly the moment that endpoint is added to the own node's broadcast receivers list, and before any other unicast messages are permitted to be sent. Furthermore, we don't allow any node to start receiving and processing broadcast packets until this new synchronization message has been received. To maintain backwards compatibility, we still open up for broadcast reception if we receive a NAME_DISTR message without any preceding broadcast sync message. In this case, we must assume that the other end has an older code version, and will never send out the new synchronization message. Hence, for mixed old and new nodes, the issue arising in 7-12 of the above may happen with the same probability as before. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-16 05:51:31 +00:00
if (l_ptr->owner->working_links == 1)
tipc_link_send_sync(l_ptr);
link_set_timer(l_ptr, cont_intv);
break;
case RESET_MSG:
l_ptr->state = RESET_RESET;
l_ptr->fsm_msg_cnt = 0;
tipc_link_send_proto_msg(l_ptr, ACTIVATE_MSG, 1, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
link_set_timer(l_ptr, cont_intv);
break;
case STARTING_EVT:
l_ptr->started = 1;
/* fall through */
case TIMEOUT_EVT:
tipc_link_send_proto_msg(l_ptr, RESET_MSG, 0, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
link_set_timer(l_ptr, cont_intv);
break;
default:
pr_err("%s%u in RU state\n", link_unk_evt, event);
}
break;
case RESET_RESET:
switch (event) {
case TRAFFIC_MSG_EVT:
case ACTIVATE_MSG:
other = l_ptr->owner->active_links[0];
if (other && link_working_unknown(other))
break;
l_ptr->state = WORKING_WORKING;
l_ptr->fsm_msg_cnt = 0;
link_activate(l_ptr);
tipc_link_send_proto_msg(l_ptr, STATE_MSG, 1, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
tipc: introduce message to synchronize broadcast link Upon establishing a first link between two nodes, there is currently a risk that the two endpoints will disagree on exactly which sequence number reception and acknowleding of broadcast packets should start. The following scenarios may happen: 1: Node A sends an ACTIVATE message to B, telling it to start acking packets from sequence number N. 2: Node A sends out broadcast N, but does not expect an acknowledge from B, since B is not yet in its broadcast receiver's list. 3: Node A receives ACK for N from all nodes except B, and releases packet N. 4: Node B receives the ACTIVATE, activates its link endpoint, and stores the value N as sequence number of first expected packet. 5: Node B sends a NAME_DISTR message to A. 6: Node A receives the NAME_DISTR message, and activates its endpoint. At this moment B is added to A's broadcast receiver's set. Node A also sets sequence number 0 as the first broadcast packet to be received from B. 7: Node A sends broadcast N+1. 8: B receives N+1, determines there is a gap in the sequence, since it is expecting N, and sends a NACK for N back to A. 9: Node A has already released N, so no retransmission is possible. The broadcast link in direction A->B is stale. In addition to, or instead of, 7-9 above, the following may happen: 10: Node B sends broadcast M > 0 to A. 11: Node A receives M, falsely decides there must be a gap, since it is expecting packet 0, and asks for retransmission of packets [0,M-1]. 12: Node B has already released these packets, so the broadcast link is stale in direction B->A. We solve this problem by introducing a new unicast message type, BCAST_PROTOCOL/STATE, to convey the sequence number of the next sent broadcast packet to the other endpoint, at exactly the moment that endpoint is added to the own node's broadcast receivers list, and before any other unicast messages are permitted to be sent. Furthermore, we don't allow any node to start receiving and processing broadcast packets until this new synchronization message has been received. To maintain backwards compatibility, we still open up for broadcast reception if we receive a NAME_DISTR message without any preceding broadcast sync message. In this case, we must assume that the other end has an older code version, and will never send out the new synchronization message. Hence, for mixed old and new nodes, the issue arising in 7-12 of the above may happen with the same probability as before. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-16 05:51:31 +00:00
if (l_ptr->owner->working_links == 1)
tipc_link_send_sync(l_ptr);
link_set_timer(l_ptr, cont_intv);
break;
case RESET_MSG:
break;
case TIMEOUT_EVT:
tipc_link_send_proto_msg(l_ptr, ACTIVATE_MSG, 0, 0, 0, 0, 0);
l_ptr->fsm_msg_cnt++;
link_set_timer(l_ptr, cont_intv);
break;
default:
pr_err("%s%u in RR state\n", link_unk_evt, event);
}
break;
default:
pr_err("Unknown link state %u/%u\n", l_ptr->state, event);
}
}
/*
* link_bundle_buf(): Append contents of a buffer to
* the tail of an existing one.
*/
static int link_bundle_buf(struct tipc_link *l_ptr,
struct sk_buff *bundler,
struct sk_buff *buf)
{
struct tipc_msg *bundler_msg = buf_msg(bundler);
struct tipc_msg *msg = buf_msg(buf);
u32 size = msg_size(msg);
u32 bundle_size = msg_size(bundler_msg);
u32 to_pos = align(bundle_size);
u32 pad = to_pos - bundle_size;
if (msg_user(bundler_msg) != MSG_BUNDLER)
return 0;
if (msg_type(bundler_msg) != OPEN_MSG)
return 0;
if (skb_tailroom(bundler) < (pad + size))
return 0;
if (l_ptr->max_pkt < (to_pos + size))
return 0;
skb_put(bundler, pad + size);
skb_copy_to_linear_data_offset(bundler, to_pos, buf->data, size);
msg_set_size(bundler_msg, to_pos + size);
msg_set_msgcnt(bundler_msg, msg_msgcnt(bundler_msg) + 1);
kfree_skb(buf);
l_ptr->stats.sent_bundled++;
return 1;
}
static void link_add_to_outqueue(struct tipc_link *l_ptr,
struct sk_buff *buf,
struct tipc_msg *msg)
{
u32 ack = mod(l_ptr->next_in_no - 1);
u32 seqno = mod(l_ptr->next_out_no++);
msg_set_word(msg, 2, ((ack << 16) | seqno));
msg_set_bcast_ack(msg, l_ptr->owner->bclink.last_in);
buf->next = NULL;
if (l_ptr->first_out) {
l_ptr->last_out->next = buf;
l_ptr->last_out = buf;
} else
l_ptr->first_out = l_ptr->last_out = buf;
l_ptr->out_queue_size++;
if (l_ptr->out_queue_size > l_ptr->stats.max_queue_sz)
l_ptr->stats.max_queue_sz = l_ptr->out_queue_size;
}
static void link_add_chain_to_outqueue(struct tipc_link *l_ptr,
struct sk_buff *buf_chain,
u32 long_msgno)
{
struct sk_buff *buf;
struct tipc_msg *msg;
if (!l_ptr->next_out)
l_ptr->next_out = buf_chain;
while (buf_chain) {
buf = buf_chain;
buf_chain = buf_chain->next;
msg = buf_msg(buf);
msg_set_long_msgno(msg, long_msgno);
link_add_to_outqueue(l_ptr, buf, msg);
}
}
/*
* tipc_link_send_buf() is the 'full path' for messages, called from
* inside TIPC when the 'fast path' in tipc_send_buf
* has failed, and from link_send()
*/
int tipc_link_send_buf(struct tipc_link *l_ptr, struct sk_buff *buf)
{
struct tipc_msg *msg = buf_msg(buf);
u32 size = msg_size(msg);
u32 dsz = msg_data_sz(msg);
u32 queue_size = l_ptr->out_queue_size;
u32 imp = tipc_msg_tot_importance(msg);
u32 queue_limit = l_ptr->queue_limit[imp];
u32 max_packet = l_ptr->max_pkt;
/* Match msg importance against queue limits: */
if (unlikely(queue_size >= queue_limit)) {
if (imp <= TIPC_CRITICAL_IMPORTANCE) {
link_schedule_port(l_ptr, msg_origport(msg), size);
kfree_skb(buf);
return -ELINKCONG;
}
kfree_skb(buf);
if (imp > CONN_MANAGER) {
pr_warn("%s<%s>, send queue full", link_rst_msg,
l_ptr->name);
tipc_link_reset(l_ptr);
}
return dsz;
}
/* Fragmentation needed ? */
if (size > max_packet)
return link_send_long_buf(l_ptr, buf);
/* Packet can be queued or sent. */
if (likely(!tipc_bearer_blocked(l_ptr->b_ptr) &&
!link_congested(l_ptr))) {
link_add_to_outqueue(l_ptr, buf, msg);
tipc_bearer_send(l_ptr->b_ptr, buf, &l_ptr->media_addr);
l_ptr->unacked_window = 0;
return dsz;
}
/* Congestion: can message be bundled ? */
if ((msg_user(msg) != CHANGEOVER_PROTOCOL) &&
(msg_user(msg) != MSG_FRAGMENTER)) {
/* Try adding message to an existing bundle */
if (l_ptr->next_out &&
link_bundle_buf(l_ptr, l_ptr->last_out, buf))
return dsz;
/* Try creating a new bundle */
if (size <= max_packet * 2 / 3) {
struct sk_buff *bundler = tipc_buf_acquire(max_packet);
struct tipc_msg bundler_hdr;
if (bundler) {
tipc_msg_init(&bundler_hdr, MSG_BUNDLER, OPEN_MSG,
INT_H_SIZE, l_ptr->addr);
skb_copy_to_linear_data(bundler, &bundler_hdr,
INT_H_SIZE);
skb_trim(bundler, INT_H_SIZE);
link_bundle_buf(l_ptr, bundler, buf);
buf = bundler;
msg = buf_msg(buf);
l_ptr->stats.sent_bundles++;
}
}
}
if (!l_ptr->next_out)
l_ptr->next_out = buf;
link_add_to_outqueue(l_ptr, buf, msg);
return dsz;
}
/*
* tipc_link_send(): same as tipc_link_send_buf(), but the link to use has
* not been selected yet, and the the owner node is not locked
* Called by TIPC internal users, e.g. the name distributor
*/
int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector)
{
struct tipc_link *l_ptr;
struct tipc_node *n_ptr;
int res = -ELINKCONG;
read_lock_bh(&tipc_net_lock);
n_ptr = tipc_node_find(dest);
if (n_ptr) {
tipc_node_lock(n_ptr);
l_ptr = n_ptr->active_links[selector & 1];
if (l_ptr)
res = tipc_link_send_buf(l_ptr, buf);
else
kfree_skb(buf);
tipc_node_unlock(n_ptr);
} else {
kfree_skb(buf);
}
read_unlock_bh(&tipc_net_lock);
return res;
}
tipc: introduce message to synchronize broadcast link Upon establishing a first link between two nodes, there is currently a risk that the two endpoints will disagree on exactly which sequence number reception and acknowleding of broadcast packets should start. The following scenarios may happen: 1: Node A sends an ACTIVATE message to B, telling it to start acking packets from sequence number N. 2: Node A sends out broadcast N, but does not expect an acknowledge from B, since B is not yet in its broadcast receiver's list. 3: Node A receives ACK for N from all nodes except B, and releases packet N. 4: Node B receives the ACTIVATE, activates its link endpoint, and stores the value N as sequence number of first expected packet. 5: Node B sends a NAME_DISTR message to A. 6: Node A receives the NAME_DISTR message, and activates its endpoint. At this moment B is added to A's broadcast receiver's set. Node A also sets sequence number 0 as the first broadcast packet to be received from B. 7: Node A sends broadcast N+1. 8: B receives N+1, determines there is a gap in the sequence, since it is expecting N, and sends a NACK for N back to A. 9: Node A has already released N, so no retransmission is possible. The broadcast link in direction A->B is stale. In addition to, or instead of, 7-9 above, the following may happen: 10: Node B sends broadcast M > 0 to A. 11: Node A receives M, falsely decides there must be a gap, since it is expecting packet 0, and asks for retransmission of packets [0,M-1]. 12: Node B has already released these packets, so the broadcast link is stale in direction B->A. We solve this problem by introducing a new unicast message type, BCAST_PROTOCOL/STATE, to convey the sequence number of the next sent broadcast packet to the other endpoint, at exactly the moment that endpoint is added to the own node's broadcast receivers list, and before any other unicast messages are permitted to be sent. Furthermore, we don't allow any node to start receiving and processing broadcast packets until this new synchronization message has been received. To maintain backwards compatibility, we still open up for broadcast reception if we receive a NAME_DISTR message without any preceding broadcast sync message. In this case, we must assume that the other end has an older code version, and will never send out the new synchronization message. Hence, for mixed old and new nodes, the issue arising in 7-12 of the above may happen with the same probability as before. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-16 05:51:31 +00:00
/*
* tipc_link_send_sync - synchronize broadcast link endpoints.
*
* Give a newly added peer node the sequence number where it should
* start receiving and acking broadcast packets.
*
* Called with node locked
*/
static void tipc_link_send_sync(struct tipc_link *l)
{
struct sk_buff *buf;
struct tipc_msg *msg;
buf = tipc_buf_acquire(INT_H_SIZE);
if (!buf)
return;
msg = buf_msg(buf);
tipc_msg_init(msg, BCAST_PROTOCOL, STATE_MSG, INT_H_SIZE, l->addr);
msg_set_last_bcast(msg, l->owner->bclink.acked);
link_add_chain_to_outqueue(l, buf, 0);
tipc_link_push_queue(l);
}
/*
* tipc_link_recv_sync - synchronize broadcast link endpoints.
* Receive the sequence number where we should start receiving and
* acking broadcast packets from a newly added peer node, and open
* up for reception of such packets.
*
* Called with node locked
*/
static void tipc_link_recv_sync(struct tipc_node *n, struct sk_buff *buf)
{
struct tipc_msg *msg = buf_msg(buf);
n->bclink.last_sent = n->bclink.last_in = msg_last_bcast(msg);
n->bclink.recv_permitted = true;
kfree_skb(buf);
}
/*
* tipc_link_send_names - send name table entries to new neighbor
*
* Send routine for bulk delivery of name table messages when contact
* with a new neighbor occurs. No link congestion checking is performed
* because name table messages *must* be delivered. The messages must be
* small enough not to require fragmentation.
* Called without any locks held.
*/
void tipc_link_send_names(struct list_head *message_list, u32 dest)
{
struct tipc_node *n_ptr;
struct tipc_link *l_ptr;
struct sk_buff *buf;
struct sk_buff *temp_buf;
if (list_empty(message_list))
return;
read_lock_bh(&tipc_net_lock);
n_ptr = tipc_node_find(dest);
if (n_ptr) {
tipc_node_lock(n_ptr);
l_ptr = n_ptr->active_links[0];
if (l_ptr) {
/* convert circular list to linear list */
((struct sk_buff *)message_list->prev)->next = NULL;
link_add_chain_to_outqueue(l_ptr,
(struct sk_buff *)message_list->next, 0);
tipc_link_push_queue(l_ptr);
INIT_LIST_HEAD(message_list);
}
tipc_node_unlock(n_ptr);
}
read_unlock_bh(&tipc_net_lock);
/* discard the messages if they couldn't be sent */
list_for_each_safe(buf, temp_buf, ((struct sk_buff *)message_list)) {
list_del((struct list_head *)buf);
kfree_skb(buf);
}
}
/*
* link_send_buf_fast: Entry for data messages where the
* destination link is known and the header is complete,
* inclusive total message length. Very time critical.
* Link is locked. Returns user data length.
*/
static int link_send_buf_fast(struct tipc_link *l_ptr, struct sk_buff *buf,
u32 *used_max_pkt)
{
struct tipc_msg *msg = buf_msg(buf);
int res = msg_data_sz(msg);
if (likely(!link_congested(l_ptr))) {
if (likely(msg_size(msg) <= l_ptr->max_pkt)) {
if (likely(!tipc_bearer_blocked(l_ptr->b_ptr))) {
link_add_to_outqueue(l_ptr, buf, msg);
tipc_bearer_send(l_ptr->b_ptr, buf,
&l_ptr->media_addr);
l_ptr->unacked_window = 0;
return res;
}
} else
*used_max_pkt = l_ptr->max_pkt;
}
return tipc_link_send_buf(l_ptr, buf); /* All other cases */
}
/*
* tipc_send_buf_fast: Entry for data messages where the
* destination node is known and the header is complete,
* inclusive total message length.
* Returns user data length.
*/
int tipc_send_buf_fast(struct sk_buff *buf, u32 destnode)
{
struct tipc_link *l_ptr;
struct tipc_node *n_ptr;
int res;
u32 selector = msg_origport(buf_msg(buf)) & 1;
u32 dummy;
read_lock_bh(&tipc_net_lock);
n_ptr = tipc_node_find(destnode);
if (likely(n_ptr)) {
tipc_node_lock(n_ptr);
l_ptr = n_ptr->active_links[selector];
if (likely(l_ptr)) {
res = link_send_buf_fast(l_ptr, buf, &dummy);
tipc_node_unlock(n_ptr);
read_unlock_bh(&tipc_net_lock);
return res;
}
tipc_node_unlock(n_ptr);
}
read_unlock_bh(&tipc_net_lock);
res = msg_data_sz(buf_msg(buf));
tipc_reject_msg(buf, TIPC_ERR_NO_NODE);
return res;
}
/*
* tipc_link_send_sections_fast: Entry for messages where the
* destination processor is known and the header is complete,
* except for total message length.
* Returns user data length or errno.
*/
int tipc_link_send_sections_fast(struct tipc_port *sender,
struct iovec const *msg_sect,
const u32 num_sect,
unsigned int total_len,
u32 destaddr)
{
struct tipc_msg *hdr = &sender->phdr;
struct tipc_link *l_ptr;
struct sk_buff *buf;
struct tipc_node *node;
int res;
u32 selector = msg_origport(hdr) & 1;
again:
/*
* Try building message using port's max_pkt hint.
* (Must not hold any locks while building message.)
*/
res = tipc_msg_build(hdr, msg_sect, num_sect, total_len,
sender->max_pkt, !sender->user_port, &buf);
read_lock_bh(&tipc_net_lock);
node = tipc_node_find(destaddr);
if (likely(node)) {
tipc_node_lock(node);
l_ptr = node->active_links[selector];
if (likely(l_ptr)) {
if (likely(buf)) {
res = link_send_buf_fast(l_ptr, buf,
&sender->max_pkt);
exit:
tipc_node_unlock(node);
read_unlock_bh(&tipc_net_lock);
return res;
}
/* Exit if build request was invalid */
if (unlikely(res < 0))
goto exit;
/* Exit if link (or bearer) is congested */
if (link_congested(l_ptr) ||
tipc_bearer_blocked(l_ptr->b_ptr)) {
res = link_schedule_port(l_ptr,
sender->ref, res);
goto exit;
}
/*
* Message size exceeds max_pkt hint; update hint,
* then re-try fast path or fragment the message
*/
sender->max_pkt = l_ptr->max_pkt;
tipc_node_unlock(node);
read_unlock_bh(&tipc_net_lock);
if ((msg_hdr_sz(hdr) + res) <= sender->max_pkt)
goto again;
return link_send_sections_long(sender, msg_sect,
num_sect, total_len,
destaddr);
}
tipc_node_unlock(node);
}
read_unlock_bh(&tipc_net_lock);
/* Couldn't find a link to the destination node */
if (buf)
return tipc_reject_msg(buf, TIPC_ERR_NO_NODE);
if (res >= 0)
return tipc_port_reject_sections(sender, hdr, msg_sect, num_sect,
total_len, TIPC_ERR_NO_NODE);
return res;
}
/*
* link_send_sections_long(): Entry for long messages where the
* destination node is known and the header is complete,
* inclusive total message length.
* Link and bearer congestion status have been checked to be ok,
* and are ignored if they change.
*
* Note that fragments do not use the full link MTU so that they won't have
* to undergo refragmentation if link changeover causes them to be sent
* over another link with an additional tunnel header added as prefix.
* (Refragmentation will still occur if the other link has a smaller MTU.)
*
* Returns user data length or errno.
*/
static int link_send_sections_long(struct tipc_port *sender,
struct iovec const *msg_sect,
u32 num_sect,
unsigned int total_len,
u32 destaddr)
{
struct tipc_link *l_ptr;
struct tipc_node *node;
struct tipc_msg *hdr = &sender->phdr;
u32 dsz = total_len;
u32 max_pkt, fragm_sz, rest;
struct tipc_msg fragm_hdr;
struct sk_buff *buf, *buf_chain, *prev;
u32 fragm_crs, fragm_rest, hsz, sect_rest;
const unchar *sect_crs;
int curr_sect;
u32 fragm_no;
again:
fragm_no = 1;
max_pkt = sender->max_pkt - INT_H_SIZE;
/* leave room for tunnel header in case of link changeover */
fragm_sz = max_pkt - INT_H_SIZE;
/* leave room for fragmentation header in each fragment */
rest = dsz;
fragm_crs = 0;
fragm_rest = 0;
sect_rest = 0;
sect_crs = NULL;
curr_sect = -1;
/* Prepare reusable fragment header */
tipc_msg_init(&fragm_hdr, MSG_FRAGMENTER, FIRST_FRAGMENT,
INT_H_SIZE, msg_destnode(hdr));
msg_set_size(&fragm_hdr, max_pkt);
msg_set_fragm_no(&fragm_hdr, 1);
/* Prepare header of first fragment */
buf_chain = buf = tipc_buf_acquire(max_pkt);
if (!buf)
return -ENOMEM;
buf->next = NULL;
skb_copy_to_linear_data(buf, &fragm_hdr, INT_H_SIZE);
hsz = msg_hdr_sz(hdr);
skb_copy_to_linear_data_offset(buf, INT_H_SIZE, hdr, hsz);
/* Chop up message */
fragm_crs = INT_H_SIZE + hsz;
fragm_rest = fragm_sz - hsz;
do { /* For all sections */
u32 sz;
if (!sect_rest) {
sect_rest = msg_sect[++curr_sect].iov_len;
sect_crs = (const unchar *)msg_sect[curr_sect].iov_base;
}
if (sect_rest < fragm_rest)
sz = sect_rest;
else
sz = fragm_rest;
if (likely(!sender->user_port)) {
if (copy_from_user(buf->data + fragm_crs, sect_crs, sz)) {
error:
for (; buf_chain; buf_chain = buf) {
buf = buf_chain->next;
kfree_skb(buf_chain);
}
return -EFAULT;
}
} else
skb_copy_to_linear_data_offset(buf, fragm_crs,
sect_crs, sz);
sect_crs += sz;
sect_rest -= sz;
fragm_crs += sz;
fragm_rest -= sz;
rest -= sz;
if (!fragm_rest && rest) {
/* Initiate new fragment: */
if (rest <= fragm_sz) {
fragm_sz = rest;
msg_set_type(&fragm_hdr, LAST_FRAGMENT);
} else {
msg_set_type(&fragm_hdr, FRAGMENT);
}
msg_set_size(&fragm_hdr, fragm_sz + INT_H_SIZE);
msg_set_fragm_no(&fragm_hdr, ++fragm_no);
prev = buf;
buf = tipc_buf_acquire(fragm_sz + INT_H_SIZE);
if (!buf)
goto error;
buf->next = NULL;
prev->next = buf;
skb_copy_to_linear_data(buf, &fragm_hdr, INT_H_SIZE);
fragm_crs = INT_H_SIZE;
fragm_rest = fragm_sz;
}
} while (rest > 0);
/*
* Now we have a buffer chain. Select a link and check
* that packet size is still OK
*/
node = tipc_node_find(destaddr);
if (likely(node)) {
tipc_node_lock(node);
l_ptr = node->active_links[sender->ref & 1];
if (!l_ptr) {
tipc_node_unlock(node);
goto reject;
}
if (l_ptr->max_pkt < max_pkt) {
sender->max_pkt = l_ptr->max_pkt;
tipc_node_unlock(node);
for (; buf_chain; buf_chain = buf) {
buf = buf_chain->next;
kfree_skb(buf_chain);
}
goto again;
}
} else {
reject:
for (; buf_chain; buf_chain = buf) {
buf = buf_chain->next;
kfree_skb(buf_chain);
}
return tipc_port_reject_sections(sender, hdr, msg_sect, num_sect,
total_len, TIPC_ERR_NO_NODE);
}
/* Append chain of fragments to send queue & send them */
l_ptr->long_msg_seq_no++;
link_add_chain_to_outqueue(l_ptr, buf_chain, l_ptr->long_msg_seq_no);
l_ptr->stats.sent_fragments += fragm_no;
l_ptr->stats.sent_fragmented++;
tipc_link_push_queue(l_ptr);
tipc_node_unlock(node);
return dsz;
}
/*
* tipc_link_push_packet: Push one unsent packet to the media
*/
u32 tipc_link_push_packet(struct tipc_link *l_ptr)
{
struct sk_buff *buf = l_ptr->first_out;
u32 r_q_size = l_ptr->retransm_queue_size;
u32 r_q_head = l_ptr->retransm_queue_head;
/* Step to position where retransmission failed, if any, */
/* consider that buffers may have been released in meantime */
if (r_q_size && buf) {
u32 last = lesser(mod(r_q_head + r_q_size),
link_last_sent(l_ptr));
u32 first = buf_seqno(buf);
while (buf && less(first, r_q_head)) {
first = mod(first + 1);
buf = buf->next;
}
l_ptr->retransm_queue_head = r_q_head = first;
l_ptr->retransm_queue_size = r_q_size = mod(last - first);
}
/* Continue retransmission now, if there is anything: */
if (r_q_size && buf) {
msg_set_ack(buf_msg(buf), mod(l_ptr->next_in_no - 1));
msg_set_bcast_ack(buf_msg(buf), l_ptr->owner->bclink.last_in);
tipc_bearer_send(l_ptr->b_ptr, buf, &l_ptr->media_addr);
l_ptr->retransm_queue_head = mod(++r_q_head);
l_ptr->retransm_queue_size = --r_q_size;
l_ptr->stats.retransmitted++;
return 0;
}
/* Send deferred protocol message, if any: */
buf = l_ptr->proto_msg_queue;
if (buf) {
msg_set_ack(buf_msg(buf), mod(l_ptr->next_in_no - 1));
msg_set_bcast_ack(buf_msg(buf), l_ptr->owner->bclink.last_in);
tipc_bearer_send(l_ptr->b_ptr, buf, &l_ptr->media_addr);
l_ptr->unacked_window = 0;
kfree_skb(buf);
l_ptr->proto_msg_queue = NULL;
return 0;
}
/* Send one deferred data message, if send window not full: */
buf = l_ptr->next_out;
if (buf) {
struct tipc_msg *msg = buf_msg(buf);
u32 next = msg_seqno(msg);
u32 first = buf_seqno(l_ptr->first_out);
if (mod(next - first) < l_ptr->queue_limit[0]) {
msg_set_ack(msg, mod(l_ptr->next_in_no - 1));
msg_set_bcast_ack(msg, l_ptr->owner->bclink.last_in);
tipc_bearer_send(l_ptr->b_ptr, buf, &l_ptr->media_addr);
if (msg_user(msg) == MSG_BUNDLER)
msg_set_type(msg, CLOSED_MSG);
l_ptr->next_out = buf->next;
return 0;
}
}
return 1;
}
/*
* push_queue(): push out the unsent messages of a link where
* congestion has abated. Node is locked
*/
void tipc_link_push_queue(struct tipc_link *l_ptr)
{
u32 res;
if (tipc_bearer_blocked(l_ptr->b_ptr))
return;
do {
res = tipc_link_push_packet(l_ptr);
} while (!res);
}
static void link_reset_all(unsigned long addr)
{
struct tipc_node *n_ptr;
char addr_string[16];
u32 i;
read_lock_bh(&tipc_net_lock);
n_ptr = tipc_node_find((u32)addr);
if (!n_ptr) {
read_unlock_bh(&tipc_net_lock);
return; /* node no longer exists */
}
tipc_node_lock(n_ptr);
pr_warn("Resetting all links to %s\n",
tipc_addr_string_fill(addr_string, n_ptr->addr));
for (i = 0; i < MAX_BEARERS; i++) {
if (n_ptr->links[i]) {
link_print(n_ptr->links[i], "Resetting link\n");
tipc_link_reset(n_ptr->links[i]);
}
}
tipc_node_unlock(n_ptr);
read_unlock_bh(&tipc_net_lock);
}
static void link_retransmit_failure(struct tipc_link *l_ptr,
struct sk_buff *buf)
{
struct tipc_msg *msg = buf_msg(buf);
pr_warn("Retransmission failure on link <%s>\n", l_ptr->name);
if (l_ptr->addr) {
/* Handle failure on standard link */
link_print(l_ptr, "Resetting link\n");
tipc_link_reset(l_ptr);
} else {
/* Handle failure on broadcast link */
struct tipc_node *n_ptr;
char addr_string[16];
pr_info("Msg seq number: %u, ", msg_seqno(msg));
pr_cont("Outstanding acks: %lu\n",
(unsigned long) TIPC_SKB_CB(buf)->handle);
n_ptr = tipc_bclink_retransmit_to();
tipc_node_lock(n_ptr);
tipc_addr_string_fill(addr_string, n_ptr->addr);
pr_info("Broadcast link info for %s\n", addr_string);
pr_info("Reception permitted: %d, Acked: %u\n",
n_ptr->bclink.recv_permitted,
n_ptr->bclink.acked);
pr_info("Last in: %u, Oos state: %u, Last sent: %u\n",
n_ptr->bclink.last_in,
n_ptr->bclink.oos_state,
n_ptr->bclink.last_sent);
tipc_k_signal((Handler)link_reset_all, (unsigned long)n_ptr->addr);
tipc_node_unlock(n_ptr);
l_ptr->stale_count = 0;
}
}
void tipc_link_retransmit(struct tipc_link *l_ptr, struct sk_buff *buf,
u32 retransmits)
{
struct tipc_msg *msg;
if (!buf)
return;
msg = buf_msg(buf);
if (tipc_bearer_blocked(l_ptr->b_ptr)) {
if (l_ptr->retransm_queue_size == 0) {
l_ptr->retransm_queue_head = msg_seqno(msg);
l_ptr->retransm_queue_size = retransmits;
} else {
pr_err("Unexpected retransmit on link %s (qsize=%d)\n",
l_ptr->name, l_ptr->retransm_queue_size);
}
return;
} else {
/* Detect repeated retransmit failures on unblocked bearer */
if (l_ptr->last_retransmitted == msg_seqno(msg)) {
if (++l_ptr->stale_count > 100) {
link_retransmit_failure(l_ptr, buf);
return;
}
} else {
l_ptr->last_retransmitted = msg_seqno(msg);
l_ptr->stale_count = 1;
}
}
while (retransmits && (buf != l_ptr->next_out) && buf) {
msg = buf_msg(buf);
msg_set_ack(msg, mod(l_ptr->next_in_no - 1));
msg_set_bcast_ack(msg, l_ptr->owner->bclink.last_in);
tipc_bearer_send(l_ptr->b_ptr, buf, &l_ptr->media_addr);
buf = buf->next;
retransmits--;
l_ptr->stats.retransmitted++;
}
l_ptr->retransm_queue_head = l_ptr->retransm_queue_size = 0;
}
/**
* link_insert_deferred_queue - insert deferred messages back into receive chain
*/
static struct sk_buff *link_insert_deferred_queue(struct tipc_link *l_ptr,
struct sk_buff *buf)
{
u32 seq_no;
if (l_ptr->oldest_deferred_in == NULL)
return buf;
seq_no = buf_seqno(l_ptr->oldest_deferred_in);
if (seq_no == mod(l_ptr->next_in_no)) {
l_ptr->newest_deferred_in->next = buf;
buf = l_ptr->oldest_deferred_in;
l_ptr->oldest_deferred_in = NULL;
l_ptr->deferred_inqueue_sz = 0;
}
return buf;
}
/**
* link_recv_buf_validate - validate basic format of received message
*
* This routine ensures a TIPC message has an acceptable header, and at least
* as much data as the header indicates it should. The routine also ensures
* that the entire message header is stored in the main fragment of the message
* buffer, to simplify future access to message header fields.
*
* Note: Having extra info present in the message header or data areas is OK.
* TIPC will ignore the excess, under the assumption that it is optional info
* introduced by a later release of the protocol.
*/
static int link_recv_buf_validate(struct sk_buff *buf)
{
static u32 min_data_hdr_size[8] = {
SHORT_H_SIZE, MCAST_H_SIZE, NAMED_H_SIZE, BASIC_H_SIZE,
MAX_H_SIZE, MAX_H_SIZE, MAX_H_SIZE, MAX_H_SIZE
};
struct tipc_msg *msg;
u32 tipc_hdr[2];
u32 size;
u32 hdr_size;
u32 min_hdr_size;
if (unlikely(buf->len < MIN_H_SIZE))
return 0;
msg = skb_header_pointer(buf, 0, sizeof(tipc_hdr), tipc_hdr);
if (msg == NULL)
return 0;
if (unlikely(msg_version(msg) != TIPC_VERSION))
return 0;
size = msg_size(msg);
hdr_size = msg_hdr_sz(msg);
min_hdr_size = msg_isdata(msg) ?
min_data_hdr_size[msg_type(msg)] : INT_H_SIZE;
if (unlikely((hdr_size < min_hdr_size) ||
(size < hdr_size) ||
(buf->len < size) ||
(size - hdr_size > TIPC_MAX_USER_MSG_SIZE)))
return 0;
return pskb_may_pull(buf, hdr_size);
}
/**
* tipc_recv_msg - process TIPC messages arriving from off-node
* @head: pointer to message buffer chain
* @tb_ptr: pointer to bearer message arrived on
*
* Invoked with no locks held. Bearer pointer must point to a valid bearer
* structure (i.e. cannot be NULL), but bearer can be inactive.
*/
void tipc_recv_msg(struct sk_buff *head, struct tipc_bearer *b_ptr)
{
read_lock_bh(&tipc_net_lock);
while (head) {
struct tipc_node *n_ptr;
struct tipc_link *l_ptr;
struct sk_buff *crs;
struct sk_buff *buf = head;
struct tipc_msg *msg;
u32 seq_no;
u32 ackd;
u32 released = 0;
int type;
head = head->next;
/* Ensure bearer is still enabled */
if (unlikely(!b_ptr->active))
goto cont;
/* Ensure message is well-formed */
if (unlikely(!link_recv_buf_validate(buf)))
goto cont;
/* Ensure message data is a single contiguous unit */
if (unlikely(skb_linearize(buf)))
goto cont;
/* Handle arrival of a non-unicast link message */
msg = buf_msg(buf);
if (unlikely(msg_non_seq(msg))) {
if (msg_user(msg) == LINK_CONFIG)
tipc_disc_recv_msg(buf, b_ptr);
else
tipc_bclink_recv_pkt(buf);
continue;
}
/* Discard unicast link messages destined for another node */
if (unlikely(!msg_short(msg) &&
(msg_destnode(msg) != tipc_own_addr)))
goto cont;
/* Locate neighboring node that sent message */
n_ptr = tipc_node_find(msg_prevnode(msg));
if (unlikely(!n_ptr))
goto cont;
tipc_node_lock(n_ptr);
tipc: Ensure both nodes recognize loss of contact between them Enhances TIPC to ensure that a node that loses contact with a neighboring node does not allow contact to be re-established until it sees that its peer has also recognized the loss of contact. Previously, nodes that were connected by two or more links could encounter a situation in which node A would lose contact with node B on all of its links, purge its name table of names published by B, and then fail to repopulate those names once contact with B was restored. This would happen because B was able to re-establish one or more links so quickly that it never reached a point where it had no links to A -- meaning that B never saw a loss of contact with A, and consequently didn't re-publish its names to A. This problem is now prevented by enhancing the cleanup done by TIPC following a loss of contact with a neighboring node to ensure that node A ignores all messages sent by B until it receives a LINK_PROTOCOL message that indicates B has lost contact with A, thereby preventing the (re)establishment of links between the nodes. The loss of contact is recognized when a RESET or ACTIVATE message is received that has a "redundant link exists" field of 0, indicating that B's sending link endpoint is in a reset state and that B has no other working links. Additionally, TIPC now suppresses the sending of (most) link protocol messages to a neighboring node while it is cleaning up after an earlier loss of contact with that node. This stops the peer node from prematurely activating its link endpoint, which would prevent TIPC from later activating its own end. TIPC still allows outgoing RESET messages to occur during cleanup, to avoid problems if its own node recognizes the loss of contact first and tries to notify the peer of the situation. Finally, TIPC now recognizes an impending loss of contact with a peer node as soon as it receives a RESET message on a working link that is the peer's only link to the node, and ensures that the link protocol suppression mentioned above goes into effect right away -- that is, even before its own link endpoints have failed. This is necessary to ensure correct operation when there are redundant links between the nodes, since otherwise TIPC would send an ACTIVATE message upon receiving a RESET on its first link and only begin suppressing when a RESET on its second link was received, instead of initiating suppression with the first RESET message as it needs to. Note: The reworked cleanup code also eliminates a check that prevented a link endpoint's discovery object from responding to incoming messages while stale name table entries are being purged. This check is now unnecessary and would have slowed down re-establishment of communication between the nodes in some situations. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-27 15:00:51 +00:00
/* Locate unicast link endpoint that should handle message */
l_ptr = n_ptr->links[b_ptr->identity];
if (unlikely(!l_ptr)) {
tipc_node_unlock(n_ptr);
goto cont;
}
tipc: Ensure both nodes recognize loss of contact between them Enhances TIPC to ensure that a node that loses contact with a neighboring node does not allow contact to be re-established until it sees that its peer has also recognized the loss of contact. Previously, nodes that were connected by two or more links could encounter a situation in which node A would lose contact with node B on all of its links, purge its name table of names published by B, and then fail to repopulate those names once contact with B was restored. This would happen because B was able to re-establish one or more links so quickly that it never reached a point where it had no links to A -- meaning that B never saw a loss of contact with A, and consequently didn't re-publish its names to A. This problem is now prevented by enhancing the cleanup done by TIPC following a loss of contact with a neighboring node to ensure that node A ignores all messages sent by B until it receives a LINK_PROTOCOL message that indicates B has lost contact with A, thereby preventing the (re)establishment of links between the nodes. The loss of contact is recognized when a RESET or ACTIVATE message is received that has a "redundant link exists" field of 0, indicating that B's sending link endpoint is in a reset state and that B has no other working links. Additionally, TIPC now suppresses the sending of (most) link protocol messages to a neighboring node while it is cleaning up after an earlier loss of contact with that node. This stops the peer node from prematurely activating its link endpoint, which would prevent TIPC from later activating its own end. TIPC still allows outgoing RESET messages to occur during cleanup, to avoid problems if its own node recognizes the loss of contact first and tries to notify the peer of the situation. Finally, TIPC now recognizes an impending loss of contact with a peer node as soon as it receives a RESET message on a working link that is the peer's only link to the node, and ensures that the link protocol suppression mentioned above goes into effect right away -- that is, even before its own link endpoints have failed. This is necessary to ensure correct operation when there are redundant links between the nodes, since otherwise TIPC would send an ACTIVATE message upon receiving a RESET on its first link and only begin suppressing when a RESET on its second link was received, instead of initiating suppression with the first RESET message as it needs to. Note: The reworked cleanup code also eliminates a check that prevented a link endpoint's discovery object from responding to incoming messages while stale name table entries are being purged. This check is now unnecessary and would have slowed down re-establishment of communication between the nodes in some situations. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-27 15:00:51 +00:00
/* Verify that communication with node is currently allowed */
if ((n_ptr->block_setup & WAIT_PEER_DOWN) &&
msg_user(msg) == LINK_PROTOCOL &&
(msg_type(msg) == RESET_MSG ||
msg_type(msg) == ACTIVATE_MSG) &&
!msg_redundant_link(msg))
n_ptr->block_setup &= ~WAIT_PEER_DOWN;
if (n_ptr->block_setup) {
tipc_node_unlock(n_ptr);
goto cont;
}
/* Validate message sequence number info */
seq_no = msg_seqno(msg);
ackd = msg_ack(msg);
/* Release acked messages */
if (n_ptr->bclink.recv_permitted)
tipc_bclink_acknowledge(n_ptr, msg_bcast_ack(msg));
crs = l_ptr->first_out;
while ((crs != l_ptr->next_out) &&
less_eq(buf_seqno(crs), ackd)) {
struct sk_buff *next = crs->next;
kfree_skb(crs);
crs = next;
released++;
}
if (released) {
l_ptr->first_out = crs;
l_ptr->out_queue_size -= released;
}
/* Try sending any messages link endpoint has pending */
if (unlikely(l_ptr->next_out))
tipc_link_push_queue(l_ptr);
if (unlikely(!list_empty(&l_ptr->waiting_ports)))
tipc_link_wakeup_ports(l_ptr, 0);
if (unlikely(++l_ptr->unacked_window >= TIPC_MIN_LINK_WIN)) {
l_ptr->stats.sent_acks++;
tipc_link_send_proto_msg(l_ptr, STATE_MSG, 0, 0, 0, 0, 0);
}
/* Now (finally!) process the incoming message */
protocol_check:
if (likely(link_working_working(l_ptr))) {
if (likely(seq_no == mod(l_ptr->next_in_no))) {
l_ptr->next_in_no++;
if (unlikely(l_ptr->oldest_deferred_in))
head = link_insert_deferred_queue(l_ptr,
head);
deliver:
if (likely(msg_isdata(msg))) {
tipc_node_unlock(n_ptr);
tipc_port_recv_msg(buf);
continue;
}
switch (msg_user(msg)) {
int ret;
case MSG_BUNDLER:
l_ptr->stats.recv_bundles++;
l_ptr->stats.recv_bundled +=
msg_msgcnt(msg);
tipc_node_unlock(n_ptr);
tipc_link_recv_bundle(buf);
continue;
case NAME_DISTRIBUTOR:
tipc: introduce message to synchronize broadcast link Upon establishing a first link between two nodes, there is currently a risk that the two endpoints will disagree on exactly which sequence number reception and acknowleding of broadcast packets should start. The following scenarios may happen: 1: Node A sends an ACTIVATE message to B, telling it to start acking packets from sequence number N. 2: Node A sends out broadcast N, but does not expect an acknowledge from B, since B is not yet in its broadcast receiver's list. 3: Node A receives ACK for N from all nodes except B, and releases packet N. 4: Node B receives the ACTIVATE, activates its link endpoint, and stores the value N as sequence number of first expected packet. 5: Node B sends a NAME_DISTR message to A. 6: Node A receives the NAME_DISTR message, and activates its endpoint. At this moment B is added to A's broadcast receiver's set. Node A also sets sequence number 0 as the first broadcast packet to be received from B. 7: Node A sends broadcast N+1. 8: B receives N+1, determines there is a gap in the sequence, since it is expecting N, and sends a NACK for N back to A. 9: Node A has already released N, so no retransmission is possible. The broadcast link in direction A->B is stale. In addition to, or instead of, 7-9 above, the following may happen: 10: Node B sends broadcast M > 0 to A. 11: Node A receives M, falsely decides there must be a gap, since it is expecting packet 0, and asks for retransmission of packets [0,M-1]. 12: Node B has already released these packets, so the broadcast link is stale in direction B->A. We solve this problem by introducing a new unicast message type, BCAST_PROTOCOL/STATE, to convey the sequence number of the next sent broadcast packet to the other endpoint, at exactly the moment that endpoint is added to the own node's broadcast receivers list, and before any other unicast messages are permitted to be sent. Furthermore, we don't allow any node to start receiving and processing broadcast packets until this new synchronization message has been received. To maintain backwards compatibility, we still open up for broadcast reception if we receive a NAME_DISTR message without any preceding broadcast sync message. In this case, we must assume that the other end has an older code version, and will never send out the new synchronization message. Hence, for mixed old and new nodes, the issue arising in 7-12 of the above may happen with the same probability as before. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-16 05:51:31 +00:00
n_ptr->bclink.recv_permitted = true;
tipc_node_unlock(n_ptr);
tipc_named_recv(buf);
continue;
tipc: introduce message to synchronize broadcast link Upon establishing a first link between two nodes, there is currently a risk that the two endpoints will disagree on exactly which sequence number reception and acknowleding of broadcast packets should start. The following scenarios may happen: 1: Node A sends an ACTIVATE message to B, telling it to start acking packets from sequence number N. 2: Node A sends out broadcast N, but does not expect an acknowledge from B, since B is not yet in its broadcast receiver's list. 3: Node A receives ACK for N from all nodes except B, and releases packet N. 4: Node B receives the ACTIVATE, activates its link endpoint, and stores the value N as sequence number of first expected packet. 5: Node B sends a NAME_DISTR message to A. 6: Node A receives the NAME_DISTR message, and activates its endpoint. At this moment B is added to A's broadcast receiver's set. Node A also sets sequence number 0 as the first broadcast packet to be received from B. 7: Node A sends broadcast N+1. 8: B receives N+1, determines there is a gap in the sequence, since it is expecting N, and sends a NACK for N back to A. 9: Node A has already released N, so no retransmission is possible. The broadcast link in direction A->B is stale. In addition to, or instead of, 7-9 above, the following may happen: 10: Node B sends broadcast M > 0 to A. 11: Node A receives M, falsely decides there must be a gap, since it is expecting packet 0, and asks for retransmission of packets [0,M-1]. 12: Node B has already released these packets, so the broadcast link is stale in direction B->A. We solve this problem by introducing a new unicast message type, BCAST_PROTOCOL/STATE, to convey the sequence number of the next sent broadcast packet to the other endpoint, at exactly the moment that endpoint is added to the own node's broadcast receivers list, and before any other unicast messages are permitted to be sent. Furthermore, we don't allow any node to start receiving and processing broadcast packets until this new synchronization message has been received. To maintain backwards compatibility, we still open up for broadcast reception if we receive a NAME_DISTR message without any preceding broadcast sync message. In this case, we must assume that the other end has an older code version, and will never send out the new synchronization message. Hence, for mixed old and new nodes, the issue arising in 7-12 of the above may happen with the same probability as before. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-16 05:51:31 +00:00
case BCAST_PROTOCOL:
tipc_link_recv_sync(n_ptr, buf);
tipc_node_unlock(n_ptr);
continue;
case CONN_MANAGER:
tipc_node_unlock(n_ptr);
tipc_port_recv_proto_msg(buf);
continue;
case MSG_FRAGMENTER:
l_ptr->stats.recv_fragments++;
ret = tipc_link_recv_fragment(
&l_ptr->defragm_buf,
&buf, &msg);
if (ret == 1) {
l_ptr->stats.recv_fragmented++;
goto deliver;
}
if (ret == -1)
l_ptr->next_in_no--;
break;
case CHANGEOVER_PROTOCOL:
type = msg_type(msg);
if (link_recv_changeover_msg(&l_ptr,
&buf)) {
msg = buf_msg(buf);
seq_no = msg_seqno(msg);
if (type == ORIGINAL_MSG)
goto deliver;
goto protocol_check;
}
break;
default:
kfree_skb(buf);
buf = NULL;
break;
}
tipc_node_unlock(n_ptr);
tipc_net_route_msg(buf);
continue;
}
link_handle_out_of_seq_msg(l_ptr, buf);
head = link_insert_deferred_queue(l_ptr, head);
tipc_node_unlock(n_ptr);
continue;
}
tipc: introduce message to synchronize broadcast link Upon establishing a first link between two nodes, there is currently a risk that the two endpoints will disagree on exactly which sequence number reception and acknowleding of broadcast packets should start. The following scenarios may happen: 1: Node A sends an ACTIVATE message to B, telling it to start acking packets from sequence number N. 2: Node A sends out broadcast N, but does not expect an acknowledge from B, since B is not yet in its broadcast receiver's list. 3: Node A receives ACK for N from all nodes except B, and releases packet N. 4: Node B receives the ACTIVATE, activates its link endpoint, and stores the value N as sequence number of first expected packet. 5: Node B sends a NAME_DISTR message to A. 6: Node A receives the NAME_DISTR message, and activates its endpoint. At this moment B is added to A's broadcast receiver's set. Node A also sets sequence number 0 as the first broadcast packet to be received from B. 7: Node A sends broadcast N+1. 8: B receives N+1, determines there is a gap in the sequence, since it is expecting N, and sends a NACK for N back to A. 9: Node A has already released N, so no retransmission is possible. The broadcast link in direction A->B is stale. In addition to, or instead of, 7-9 above, the following may happen: 10: Node B sends broadcast M > 0 to A. 11: Node A receives M, falsely decides there must be a gap, since it is expecting packet 0, and asks for retransmission of packets [0,M-1]. 12: Node B has already released these packets, so the broadcast link is stale in direction B->A. We solve this problem by introducing a new unicast message type, BCAST_PROTOCOL/STATE, to convey the sequence number of the next sent broadcast packet to the other endpoint, at exactly the moment that endpoint is added to the own node's broadcast receivers list, and before any other unicast messages are permitted to be sent. Furthermore, we don't allow any node to start receiving and processing broadcast packets until this new synchronization message has been received. To maintain backwards compatibility, we still open up for broadcast reception if we receive a NAME_DISTR message without any preceding broadcast sync message. In this case, we must assume that the other end has an older code version, and will never send out the new synchronization message. Hence, for mixed old and new nodes, the issue arising in 7-12 of the above may happen with the same probability as before. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-16 05:51:31 +00:00
/* Link is not in state WORKING_WORKING */
if (msg_user(msg) == LINK_PROTOCOL) {
link_recv_proto_msg(l_ptr, buf);
head = link_insert_deferred_queue(l_ptr, head);
tipc_node_unlock(n_ptr);
continue;
}
tipc: introduce message to synchronize broadcast link Upon establishing a first link between two nodes, there is currently a risk that the two endpoints will disagree on exactly which sequence number reception and acknowleding of broadcast packets should start. The following scenarios may happen: 1: Node A sends an ACTIVATE message to B, telling it to start acking packets from sequence number N. 2: Node A sends out broadcast N, but does not expect an acknowledge from B, since B is not yet in its broadcast receiver's list. 3: Node A receives ACK for N from all nodes except B, and releases packet N. 4: Node B receives the ACTIVATE, activates its link endpoint, and stores the value N as sequence number of first expected packet. 5: Node B sends a NAME_DISTR message to A. 6: Node A receives the NAME_DISTR message, and activates its endpoint. At this moment B is added to A's broadcast receiver's set. Node A also sets sequence number 0 as the first broadcast packet to be received from B. 7: Node A sends broadcast N+1. 8: B receives N+1, determines there is a gap in the sequence, since it is expecting N, and sends a NACK for N back to A. 9: Node A has already released N, so no retransmission is possible. The broadcast link in direction A->B is stale. In addition to, or instead of, 7-9 above, the following may happen: 10: Node B sends broadcast M > 0 to A. 11: Node A receives M, falsely decides there must be a gap, since it is expecting packet 0, and asks for retransmission of packets [0,M-1]. 12: Node B has already released these packets, so the broadcast link is stale in direction B->A. We solve this problem by introducing a new unicast message type, BCAST_PROTOCOL/STATE, to convey the sequence number of the next sent broadcast packet to the other endpoint, at exactly the moment that endpoint is added to the own node's broadcast receivers list, and before any other unicast messages are permitted to be sent. Furthermore, we don't allow any node to start receiving and processing broadcast packets until this new synchronization message has been received. To maintain backwards compatibility, we still open up for broadcast reception if we receive a NAME_DISTR message without any preceding broadcast sync message. In this case, we must assume that the other end has an older code version, and will never send out the new synchronization message. Hence, for mixed old and new nodes, the issue arising in 7-12 of the above may happen with the same probability as before. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-16 05:51:31 +00:00
/* Traffic message. Conditionally activate link */
link_state_event(l_ptr, TRAFFIC_MSG_EVT);
if (link_working_working(l_ptr)) {
tipc: introduce message to synchronize broadcast link Upon establishing a first link between two nodes, there is currently a risk that the two endpoints will disagree on exactly which sequence number reception and acknowleding of broadcast packets should start. The following scenarios may happen: 1: Node A sends an ACTIVATE message to B, telling it to start acking packets from sequence number N. 2: Node A sends out broadcast N, but does not expect an acknowledge from B, since B is not yet in its broadcast receiver's list. 3: Node A receives ACK for N from all nodes except B, and releases packet N. 4: Node B receives the ACTIVATE, activates its link endpoint, and stores the value N as sequence number of first expected packet. 5: Node B sends a NAME_DISTR message to A. 6: Node A receives the NAME_DISTR message, and activates its endpoint. At this moment B is added to A's broadcast receiver's set. Node A also sets sequence number 0 as the first broadcast packet to be received from B. 7: Node A sends broadcast N+1. 8: B receives N+1, determines there is a gap in the sequence, since it is expecting N, and sends a NACK for N back to A. 9: Node A has already released N, so no retransmission is possible. The broadcast link in direction A->B is stale. In addition to, or instead of, 7-9 above, the following may happen: 10: Node B sends broadcast M > 0 to A. 11: Node A receives M, falsely decides there must be a gap, since it is expecting packet 0, and asks for retransmission of packets [0,M-1]. 12: Node B has already released these packets, so the broadcast link is stale in direction B->A. We solve this problem by introducing a new unicast message type, BCAST_PROTOCOL/STATE, to convey the sequence number of the next sent broadcast packet to the other endpoint, at exactly the moment that endpoint is added to the own node's broadcast receivers list, and before any other unicast messages are permitted to be sent. Furthermore, we don't allow any node to start receiving and processing broadcast packets until this new synchronization message has been received. To maintain backwards compatibility, we still open up for broadcast reception if we receive a NAME_DISTR message without any preceding broadcast sync message. In this case, we must assume that the other end has an older code version, and will never send out the new synchronization message. Hence, for mixed old and new nodes, the issue arising in 7-12 of the above may happen with the same probability as before. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-16 05:51:31 +00:00
/* Re-insert buffer in front of queue */
buf->next = head;
head = buf;
tipc_node_unlock(n_ptr);
continue;
}
tipc_node_unlock(n_ptr);
cont:
kfree_skb(buf);
}
read_unlock_bh(&tipc_net_lock);
}
/**
* tipc_link_defer_pkt - Add out-of-sequence message to deferred reception queue
*
* Returns increase in queue length (i.e. 0 or 1)
*/
u32 tipc_link_defer_pkt(struct sk_buff **head, struct sk_buff **tail,
struct sk_buff *buf)
{
struct sk_buff *queue_buf;
struct sk_buff **prev;
u32 seq_no = buf_seqno(buf);
buf->next = NULL;
/* Empty queue ? */
if (*head == NULL) {
*head = *tail = buf;
return 1;
}
/* Last ? */
if (less(buf_seqno(*tail), seq_no)) {
(*tail)->next = buf;
*tail = buf;
return 1;
}
/* Locate insertion point in queue, then insert; discard if duplicate */
prev = head;
queue_buf = *head;
for (;;) {
u32 curr_seqno = buf_seqno(queue_buf);
if (seq_no == curr_seqno) {
kfree_skb(buf);
return 0;
}
if (less(seq_no, curr_seqno))
break;
prev = &queue_buf->next;
queue_buf = queue_buf->next;
}
buf->next = queue_buf;
*prev = buf;
return 1;
}
/*
* link_handle_out_of_seq_msg - handle arrival of out-of-sequence packet
*/
static void link_handle_out_of_seq_msg(struct tipc_link *l_ptr,
struct sk_buff *buf)
{
u32 seq_no = buf_seqno(buf);
if (likely(msg_user(buf_msg(buf)) == LINK_PROTOCOL)) {
link_recv_proto_msg(l_ptr, buf);
return;
}
/* Record OOS packet arrival (force mismatch on next timeout) */
l_ptr->checkpoint--;
/*
* Discard packet if a duplicate; otherwise add it to deferred queue
* and notify peer of gap as per protocol specification
*/
if (less(seq_no, mod(l_ptr->next_in_no))) {
l_ptr->stats.duplicates++;
kfree_skb(buf);
return;
}
if (tipc_link_defer_pkt(&l_ptr->oldest_deferred_in,
&l_ptr->newest_deferred_in, buf)) {
l_ptr->deferred_inqueue_sz++;
l_ptr->stats.deferred_recv++;
if ((l_ptr->deferred_inqueue_sz % 16) == 1)
tipc_link_send_proto_msg(l_ptr, STATE_MSG, 0, 0, 0, 0, 0);
} else
l_ptr->stats.duplicates++;
}
/*
* Send protocol message to the other endpoint.
*/
void tipc_link_send_proto_msg(struct tipc_link *l_ptr, u32 msg_typ,
int probe_msg, u32 gap, u32 tolerance,
u32 priority, u32 ack_mtu)
{
struct sk_buff *buf = NULL;
struct tipc_msg *msg = l_ptr->pmsg;
u32 msg_size = sizeof(l_ptr->proto_msg);
int r_flag;
/* Discard any previous message that was deferred due to congestion */
if (l_ptr->proto_msg_queue) {
kfree_skb(l_ptr->proto_msg_queue);
l_ptr->proto_msg_queue = NULL;
}
if (link_blocked(l_ptr))
return;
tipc: Ensure both nodes recognize loss of contact between them Enhances TIPC to ensure that a node that loses contact with a neighboring node does not allow contact to be re-established until it sees that its peer has also recognized the loss of contact. Previously, nodes that were connected by two or more links could encounter a situation in which node A would lose contact with node B on all of its links, purge its name table of names published by B, and then fail to repopulate those names once contact with B was restored. This would happen because B was able to re-establish one or more links so quickly that it never reached a point where it had no links to A -- meaning that B never saw a loss of contact with A, and consequently didn't re-publish its names to A. This problem is now prevented by enhancing the cleanup done by TIPC following a loss of contact with a neighboring node to ensure that node A ignores all messages sent by B until it receives a LINK_PROTOCOL message that indicates B has lost contact with A, thereby preventing the (re)establishment of links between the nodes. The loss of contact is recognized when a RESET or ACTIVATE message is received that has a "redundant link exists" field of 0, indicating that B's sending link endpoint is in a reset state and that B has no other working links. Additionally, TIPC now suppresses the sending of (most) link protocol messages to a neighboring node while it is cleaning up after an earlier loss of contact with that node. This stops the peer node from prematurely activating its link endpoint, which would prevent TIPC from later activating its own end. TIPC still allows outgoing RESET messages to occur during cleanup, to avoid problems if its own node recognizes the loss of contact first and tries to notify the peer of the situation. Finally, TIPC now recognizes an impending loss of contact with a peer node as soon as it receives a RESET message on a working link that is the peer's only link to the node, and ensures that the link protocol suppression mentioned above goes into effect right away -- that is, even before its own link endpoints have failed. This is necessary to ensure correct operation when there are redundant links between the nodes, since otherwise TIPC would send an ACTIVATE message upon receiving a RESET on its first link and only begin suppressing when a RESET on its second link was received, instead of initiating suppression with the first RESET message as it needs to. Note: The reworked cleanup code also eliminates a check that prevented a link endpoint's discovery object from responding to incoming messages while stale name table entries are being purged. This check is now unnecessary and would have slowed down re-establishment of communication between the nodes in some situations. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-27 15:00:51 +00:00
/* Abort non-RESET send if communication with node is prohibited */
if ((l_ptr->owner->block_setup) && (msg_typ != RESET_MSG))
return;
/* Create protocol message with "out-of-sequence" sequence number */
msg_set_type(msg, msg_typ);
msg_set_net_plane(msg, l_ptr->b_ptr->net_plane);
tipc: Major redesign of broadcast link ACK/NACK algorithms Completely redesigns broadcast link ACK and NACK mechanisms to prevent spurious retransmit requests in dual LAN networks, and to prevent the broadcast link from stalling due to the failure of a receiving node to acknowledge receiving a broadcast message or request its retransmission. Note: These changes only impact the timing of when ACK and NACK messages are sent, and not the basic broadcast link protocol itself, so inter- operability with nodes using the "classic" algorithms is maintained. The revised algorithms are as follows: 1) An explicit ACK message is still sent after receiving 16 in-sequence messages, and implicit ACK information continues to be carried in other unicast link message headers (including link state messages). However, the timing of explicit ACKs is now based on the receiving node's absolute network address rather than its relative network address to ensure that the failure of another node does not delay the ACK beyond its 16 message target. 2) A NACK message is now typically sent only when a message gap persists for two consecutive incoming link state messages; this ensures that a suspected gap is not confirmed until both LANs in a dual LAN network have had an opportunity to deliver the message, thereby preventing spurious NACKs. A NACK message can also be generated by the arrival of a single link state message, if the deferred queue is so big that the current message gap cannot be the result of "normal" mis-ordering due to the use of dual LANs (or one LAN using a bonded interface). Since link state messages typically arrive at different nodes at different times the problem of multiple nodes issuing identical NACKs simultaneously is inherently avoided. 3) Nodes continue to "peek" at NACK messages sent by other nodes. If another node requests retransmission of a message gap suspected (but not yet confirmed) by the peeking node, the peeking node forgets about the gap and does not generate a duplicate retransmit request. (If the peeking node subsequently fails to receive the lost message, later link state messages will cause it to rediscover and confirm the gap and send another NACK.) 4) Message gap "equality" is now determined by the start of the gap only. This is sufficient to deal with the most common cases of message loss, and eliminates the need for complex end of gap computations. 5) A peeking node no longer tries to determine whether it should send a complementary NACK, since the most common cases of message loss don't require it to be sent. Consequently, the node no longer examines the "broadcast tag" field of a NACK message when peeking. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-27 18:17:53 +00:00
msg_set_bcast_ack(msg, l_ptr->owner->bclink.last_in);
msg_set_last_bcast(msg, tipc_bclink_get_last_sent());
if (msg_typ == STATE_MSG) {
u32 next_sent = mod(l_ptr->next_out_no);
if (!tipc_link_is_up(l_ptr))
return;
if (l_ptr->next_out)
next_sent = buf_seqno(l_ptr->next_out);
msg_set_next_sent(msg, next_sent);
if (l_ptr->oldest_deferred_in) {
u32 rec = buf_seqno(l_ptr->oldest_deferred_in);
gap = mod(rec - mod(l_ptr->next_in_no));
}
msg_set_seq_gap(msg, gap);
if (gap)
l_ptr->stats.sent_nacks++;
msg_set_link_tolerance(msg, tolerance);
msg_set_linkprio(msg, priority);
msg_set_max_pkt(msg, ack_mtu);
msg_set_ack(msg, mod(l_ptr->next_in_no - 1));
msg_set_probe(msg, probe_msg != 0);
if (probe_msg) {
u32 mtu = l_ptr->max_pkt;
if ((mtu < l_ptr->max_pkt_target) &&
link_working_working(l_ptr) &&
l_ptr->fsm_msg_cnt) {
msg_size = (mtu + (l_ptr->max_pkt_target - mtu)/2 + 2) & ~3;
if (l_ptr->max_pkt_probes == 10) {
l_ptr->max_pkt_target = (msg_size - 4);
l_ptr->max_pkt_probes = 0;
msg_size = (mtu + (l_ptr->max_pkt_target - mtu)/2 + 2) & ~3;
}
l_ptr->max_pkt_probes++;
}
l_ptr->stats.sent_probes++;
}
l_ptr->stats.sent_states++;
} else { /* RESET_MSG or ACTIVATE_MSG */
msg_set_ack(msg, mod(l_ptr->reset_checkpoint - 1));
msg_set_seq_gap(msg, 0);
msg_set_next_sent(msg, 1);
msg_set_probe(msg, 0);
msg_set_link_tolerance(msg, l_ptr->tolerance);
msg_set_linkprio(msg, l_ptr->priority);
msg_set_max_pkt(msg, l_ptr->max_pkt_target);
}
r_flag = (l_ptr->owner->working_links > tipc_link_is_up(l_ptr));
msg_set_redundant_link(msg, r_flag);
msg_set_linkprio(msg, l_ptr->priority);
msg_set_size(msg, msg_size);
msg_set_seqno(msg, mod(l_ptr->next_out_no + (0xffff/2)));
buf = tipc_buf_acquire(msg_size);
if (!buf)
return;
skb_copy_to_linear_data(buf, msg, sizeof(l_ptr->proto_msg));
/* Defer message if bearer is already blocked */
if (tipc_bearer_blocked(l_ptr->b_ptr)) {
l_ptr->proto_msg_queue = buf;
return;
}
tipc_bearer_send(l_ptr->b_ptr, buf, &l_ptr->media_addr);
l_ptr->unacked_window = 0;
kfree_skb(buf);
}
/*
* Receive protocol message :
* Note that network plane id propagates through the network, and may
* change at any time. The node with lowest address rules
*/
static void link_recv_proto_msg(struct tipc_link *l_ptr, struct sk_buff *buf)
{
u32 rec_gap = 0;
u32 max_pkt_info;
u32 max_pkt_ack;
u32 msg_tol;
struct tipc_msg *msg = buf_msg(buf);
if (link_blocked(l_ptr))
goto exit;
/* record unnumbered packet arrival (force mismatch on next timeout) */
l_ptr->checkpoint--;
if (l_ptr->b_ptr->net_plane != msg_net_plane(msg))
if (tipc_own_addr > msg_prevnode(msg))
l_ptr->b_ptr->net_plane = msg_net_plane(msg);
l_ptr->owner->permit_changeover = msg_redundant_link(msg);
switch (msg_type(msg)) {
case RESET_MSG:
if (!link_working_unknown(l_ptr) &&
(l_ptr->peer_session != INVALID_SESSION)) {
if (less_eq(msg_session(msg), l_ptr->peer_session))
break; /* duplicate or old reset: ignore */
}
tipc: Ensure both nodes recognize loss of contact between them Enhances TIPC to ensure that a node that loses contact with a neighboring node does not allow contact to be re-established until it sees that its peer has also recognized the loss of contact. Previously, nodes that were connected by two or more links could encounter a situation in which node A would lose contact with node B on all of its links, purge its name table of names published by B, and then fail to repopulate those names once contact with B was restored. This would happen because B was able to re-establish one or more links so quickly that it never reached a point where it had no links to A -- meaning that B never saw a loss of contact with A, and consequently didn't re-publish its names to A. This problem is now prevented by enhancing the cleanup done by TIPC following a loss of contact with a neighboring node to ensure that node A ignores all messages sent by B until it receives a LINK_PROTOCOL message that indicates B has lost contact with A, thereby preventing the (re)establishment of links between the nodes. The loss of contact is recognized when a RESET or ACTIVATE message is received that has a "redundant link exists" field of 0, indicating that B's sending link endpoint is in a reset state and that B has no other working links. Additionally, TIPC now suppresses the sending of (most) link protocol messages to a neighboring node while it is cleaning up after an earlier loss of contact with that node. This stops the peer node from prematurely activating its link endpoint, which would prevent TIPC from later activating its own end. TIPC still allows outgoing RESET messages to occur during cleanup, to avoid problems if its own node recognizes the loss of contact first and tries to notify the peer of the situation. Finally, TIPC now recognizes an impending loss of contact with a peer node as soon as it receives a RESET message on a working link that is the peer's only link to the node, and ensures that the link protocol suppression mentioned above goes into effect right away -- that is, even before its own link endpoints have failed. This is necessary to ensure correct operation when there are redundant links between the nodes, since otherwise TIPC would send an ACTIVATE message upon receiving a RESET on its first link and only begin suppressing when a RESET on its second link was received, instead of initiating suppression with the first RESET message as it needs to. Note: The reworked cleanup code also eliminates a check that prevented a link endpoint's discovery object from responding to incoming messages while stale name table entries are being purged. This check is now unnecessary and would have slowed down re-establishment of communication between the nodes in some situations. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-27 15:00:51 +00:00
if (!msg_redundant_link(msg) && (link_working_working(l_ptr) ||
link_working_unknown(l_ptr))) {
/*
* peer has lost contact -- don't allow peer's links
* to reactivate before we recognize loss & clean up
*/
l_ptr->owner->block_setup = WAIT_NODE_DOWN;
}
link_state_event(l_ptr, RESET_MSG);
/* fall thru' */
case ACTIVATE_MSG:
/* Update link settings according other endpoint's values */
strcpy((strrchr(l_ptr->name, ':') + 1), (char *)msg_data(msg));
msg_tol = msg_link_tolerance(msg);
if (msg_tol > l_ptr->tolerance)
link_set_supervision_props(l_ptr, msg_tol);
if (msg_linkprio(msg) > l_ptr->priority)
l_ptr->priority = msg_linkprio(msg);
max_pkt_info = msg_max_pkt(msg);
if (max_pkt_info) {
if (max_pkt_info < l_ptr->max_pkt_target)
l_ptr->max_pkt_target = max_pkt_info;
if (l_ptr->max_pkt > l_ptr->max_pkt_target)
l_ptr->max_pkt = l_ptr->max_pkt_target;
} else {
l_ptr->max_pkt = l_ptr->max_pkt_target;
}
/* Synchronize broadcast link info, if not done previously */
tipc: Major redesign of broadcast link ACK/NACK algorithms Completely redesigns broadcast link ACK and NACK mechanisms to prevent spurious retransmit requests in dual LAN networks, and to prevent the broadcast link from stalling due to the failure of a receiving node to acknowledge receiving a broadcast message or request its retransmission. Note: These changes only impact the timing of when ACK and NACK messages are sent, and not the basic broadcast link protocol itself, so inter- operability with nodes using the "classic" algorithms is maintained. The revised algorithms are as follows: 1) An explicit ACK message is still sent after receiving 16 in-sequence messages, and implicit ACK information continues to be carried in other unicast link message headers (including link state messages). However, the timing of explicit ACKs is now based on the receiving node's absolute network address rather than its relative network address to ensure that the failure of another node does not delay the ACK beyond its 16 message target. 2) A NACK message is now typically sent only when a message gap persists for two consecutive incoming link state messages; this ensures that a suspected gap is not confirmed until both LANs in a dual LAN network have had an opportunity to deliver the message, thereby preventing spurious NACKs. A NACK message can also be generated by the arrival of a single link state message, if the deferred queue is so big that the current message gap cannot be the result of "normal" mis-ordering due to the use of dual LANs (or one LAN using a bonded interface). Since link state messages typically arrive at different nodes at different times the problem of multiple nodes issuing identical NACKs simultaneously is inherently avoided. 3) Nodes continue to "peek" at NACK messages sent by other nodes. If another node requests retransmission of a message gap suspected (but not yet confirmed) by the peeking node, the peeking node forgets about the gap and does not generate a duplicate retransmit request. (If the peeking node subsequently fails to receive the lost message, later link state messages will cause it to rediscover and confirm the gap and send another NACK.) 4) Message gap "equality" is now determined by the start of the gap only. This is sufficient to deal with the most common cases of message loss, and eliminates the need for complex end of gap computations. 5) A peeking node no longer tries to determine whether it should send a complementary NACK, since the most common cases of message loss don't require it to be sent. Consequently, the node no longer examines the "broadcast tag" field of a NACK message when peeking. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-27 18:17:53 +00:00
if (!tipc_node_is_up(l_ptr->owner)) {
l_ptr->owner->bclink.last_sent =
l_ptr->owner->bclink.last_in =
msg_last_bcast(msg);
l_ptr->owner->bclink.oos_state = 0;
}
l_ptr->peer_session = msg_session(msg);
l_ptr->peer_bearer_id = msg_bearer_id(msg);
if (msg_type(msg) == ACTIVATE_MSG)
link_state_event(l_ptr, ACTIVATE_MSG);
break;
case STATE_MSG:
msg_tol = msg_link_tolerance(msg);
if (msg_tol)
link_set_supervision_props(l_ptr, msg_tol);
if (msg_linkprio(msg) &&
(msg_linkprio(msg) != l_ptr->priority)) {
pr_warn("%s<%s>, priority change %u->%u\n",
link_rst_msg, l_ptr->name, l_ptr->priority,
msg_linkprio(msg));
l_ptr->priority = msg_linkprio(msg);
tipc_link_reset(l_ptr); /* Enforce change to take effect */
break;
}
link_state_event(l_ptr, TRAFFIC_MSG_EVT);
l_ptr->stats.recv_states++;
if (link_reset_unknown(l_ptr))
break;
if (less_eq(mod(l_ptr->next_in_no), msg_next_sent(msg))) {
rec_gap = mod(msg_next_sent(msg) -
mod(l_ptr->next_in_no));
}
max_pkt_ack = msg_max_pkt(msg);
if (max_pkt_ack > l_ptr->max_pkt) {
l_ptr->max_pkt = max_pkt_ack;
l_ptr->max_pkt_probes = 0;
}
max_pkt_ack = 0;
if (msg_probe(msg)) {
l_ptr->stats.recv_probes++;
if (msg_size(msg) > sizeof(l_ptr->proto_msg))
max_pkt_ack = msg_size(msg);
}
/* Protocol message before retransmits, reduce loss risk */
if (l_ptr->owner->bclink.recv_permitted)
tipc: Major redesign of broadcast link ACK/NACK algorithms Completely redesigns broadcast link ACK and NACK mechanisms to prevent spurious retransmit requests in dual LAN networks, and to prevent the broadcast link from stalling due to the failure of a receiving node to acknowledge receiving a broadcast message or request its retransmission. Note: These changes only impact the timing of when ACK and NACK messages are sent, and not the basic broadcast link protocol itself, so inter- operability with nodes using the "classic" algorithms is maintained. The revised algorithms are as follows: 1) An explicit ACK message is still sent after receiving 16 in-sequence messages, and implicit ACK information continues to be carried in other unicast link message headers (including link state messages). However, the timing of explicit ACKs is now based on the receiving node's absolute network address rather than its relative network address to ensure that the failure of another node does not delay the ACK beyond its 16 message target. 2) A NACK message is now typically sent only when a message gap persists for two consecutive incoming link state messages; this ensures that a suspected gap is not confirmed until both LANs in a dual LAN network have had an opportunity to deliver the message, thereby preventing spurious NACKs. A NACK message can also be generated by the arrival of a single link state message, if the deferred queue is so big that the current message gap cannot be the result of "normal" mis-ordering due to the use of dual LANs (or one LAN using a bonded interface). Since link state messages typically arrive at different nodes at different times the problem of multiple nodes issuing identical NACKs simultaneously is inherently avoided. 3) Nodes continue to "peek" at NACK messages sent by other nodes. If another node requests retransmission of a message gap suspected (but not yet confirmed) by the peeking node, the peeking node forgets about the gap and does not generate a duplicate retransmit request. (If the peeking node subsequently fails to receive the lost message, later link state messages will cause it to rediscover and confirm the gap and send another NACK.) 4) Message gap "equality" is now determined by the start of the gap only. This is sufficient to deal with the most common cases of message loss, and eliminates the need for complex end of gap computations. 5) A peeking node no longer tries to determine whether it should send a complementary NACK, since the most common cases of message loss don't require it to be sent. Consequently, the node no longer examines the "broadcast tag" field of a NACK message when peeking. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-27 18:17:53 +00:00
tipc_bclink_update_link_state(l_ptr->owner,
msg_last_bcast(msg));
if (rec_gap || (msg_probe(msg))) {
tipc_link_send_proto_msg(l_ptr, STATE_MSG,
0, rec_gap, 0, 0, max_pkt_ack);
}
if (msg_seq_gap(msg)) {
l_ptr->stats.recv_nacks++;
tipc_link_retransmit(l_ptr, l_ptr->first_out,
msg_seq_gap(msg));
}
break;
}
exit:
kfree_skb(buf);
}
/*
* tipc_link_tunnel(): Send one message via a link belonging to
* another bearer. Owner node is locked.
*/
static void tipc_link_tunnel(struct tipc_link *l_ptr,
struct tipc_msg *tunnel_hdr,
struct tipc_msg *msg,
u32 selector)
{
struct tipc_link *tunnel;
struct sk_buff *buf;
u32 length = msg_size(msg);
tunnel = l_ptr->owner->active_links[selector & 1];
if (!tipc_link_is_up(tunnel)) {
pr_warn("%stunnel link no longer available\n", link_co_err);
return;
}
msg_set_size(tunnel_hdr, length + INT_H_SIZE);
buf = tipc_buf_acquire(length + INT_H_SIZE);
if (!buf) {
pr_warn("%sunable to send tunnel msg\n", link_co_err);
return;
}
skb_copy_to_linear_data(buf, tunnel_hdr, INT_H_SIZE);
skb_copy_to_linear_data_offset(buf, INT_H_SIZE, msg, length);
tipc_link_send_buf(tunnel, buf);
}
/*
* changeover(): Send whole message queue via the remaining link
* Owner node is locked.
*/
void tipc_link_changeover(struct tipc_link *l_ptr)
{
u32 msgcount = l_ptr->out_queue_size;
struct sk_buff *crs = l_ptr->first_out;
struct tipc_link *tunnel = l_ptr->owner->active_links[0];
struct tipc_msg tunnel_hdr;
int split_bundles;
if (!tunnel)
return;
if (!l_ptr->owner->permit_changeover) {
pr_warn("%speer did not permit changeover\n", link_co_err);
return;
}
tipc_msg_init(&tunnel_hdr, CHANGEOVER_PROTOCOL,
ORIGINAL_MSG, INT_H_SIZE, l_ptr->addr);
msg_set_bearer_id(&tunnel_hdr, l_ptr->peer_bearer_id);
msg_set_msgcnt(&tunnel_hdr, msgcount);
if (!l_ptr->first_out) {
struct sk_buff *buf;
buf = tipc_buf_acquire(INT_H_SIZE);
if (buf) {
skb_copy_to_linear_data(buf, &tunnel_hdr, INT_H_SIZE);
msg_set_size(&tunnel_hdr, INT_H_SIZE);
tipc_link_send_buf(tunnel, buf);
} else {
pr_warn("%sunable to send changeover msg\n",
link_co_err);
}
return;
}
split_bundles = (l_ptr->owner->active_links[0] !=
l_ptr->owner->active_links[1]);
while (crs) {
struct tipc_msg *msg = buf_msg(crs);
if ((msg_user(msg) == MSG_BUNDLER) && split_bundles) {
struct tipc_msg *m = msg_get_wrapped(msg);
unchar *pos = (unchar *)m;
msgcount = msg_msgcnt(msg);
while (msgcount--) {
msg_set_seqno(m, msg_seqno(msg));
tipc_link_tunnel(l_ptr, &tunnel_hdr, m,
msg_link_selector(m));
pos += align(msg_size(m));
m = (struct tipc_msg *)pos;
}
} else {
tipc_link_tunnel(l_ptr, &tunnel_hdr, msg,
msg_link_selector(msg));
}
crs = crs->next;
}
}
void tipc_link_send_duplicate(struct tipc_link *l_ptr, struct tipc_link *tunnel)
{
struct sk_buff *iter;
struct tipc_msg tunnel_hdr;
tipc_msg_init(&tunnel_hdr, CHANGEOVER_PROTOCOL,
DUPLICATE_MSG, INT_H_SIZE, l_ptr->addr);
msg_set_msgcnt(&tunnel_hdr, l_ptr->out_queue_size);
msg_set_bearer_id(&tunnel_hdr, l_ptr->peer_bearer_id);
iter = l_ptr->first_out;
while (iter) {
struct sk_buff *outbuf;
struct tipc_msg *msg = buf_msg(iter);
u32 length = msg_size(msg);
if (msg_user(msg) == MSG_BUNDLER)
msg_set_type(msg, CLOSED_MSG);
msg_set_ack(msg, mod(l_ptr->next_in_no - 1)); /* Update */
msg_set_bcast_ack(msg, l_ptr->owner->bclink.last_in);
msg_set_size(&tunnel_hdr, length + INT_H_SIZE);
outbuf = tipc_buf_acquire(length + INT_H_SIZE);
if (outbuf == NULL) {
pr_warn("%sunable to send duplicate msg\n",
link_co_err);
return;
}
skb_copy_to_linear_data(outbuf, &tunnel_hdr, INT_H_SIZE);
skb_copy_to_linear_data_offset(outbuf, INT_H_SIZE, iter->data,
length);
tipc_link_send_buf(tunnel, outbuf);
if (!tipc_link_is_up(l_ptr))
return;
iter = iter->next;
}
}
/**
* buf_extract - extracts embedded TIPC message from another message
* @skb: encapsulating message buffer
* @from_pos: offset to extract from
*
* Returns a new message buffer containing an embedded message. The
* encapsulating message itself is left unchanged.
*/
static struct sk_buff *buf_extract(struct sk_buff *skb, u32 from_pos)
{
struct tipc_msg *msg = (struct tipc_msg *)(skb->data + from_pos);
u32 size = msg_size(msg);
struct sk_buff *eb;
eb = tipc_buf_acquire(size);
if (eb)
skb_copy_to_linear_data(eb, msg, size);
return eb;
}
/*
* link_recv_changeover_msg(): Receive tunneled packet sent
* via other link. Node is locked. Return extracted buffer.
*/
static int link_recv_changeover_msg(struct tipc_link **l_ptr,
struct sk_buff **buf)
{
struct sk_buff *tunnel_buf = *buf;
struct tipc_link *dest_link;
struct tipc_msg *msg;
struct tipc_msg *tunnel_msg = buf_msg(tunnel_buf);
u32 msg_typ = msg_type(tunnel_msg);
u32 msg_count = msg_msgcnt(tunnel_msg);
u32 bearer_id = msg_bearer_id(tunnel_msg);
if (bearer_id >= MAX_BEARERS)
goto exit;
dest_link = (*l_ptr)->owner->links[bearer_id];
if (!dest_link)
goto exit;
if (dest_link == *l_ptr) {
pr_err("Unexpected changeover message on link <%s>\n",
(*l_ptr)->name);
goto exit;
}
*l_ptr = dest_link;
msg = msg_get_wrapped(tunnel_msg);
if (msg_typ == DUPLICATE_MSG) {
if (less(msg_seqno(msg), mod(dest_link->next_in_no)))
goto exit;
*buf = buf_extract(tunnel_buf, INT_H_SIZE);
if (*buf == NULL) {
pr_warn("%sduplicate msg dropped\n", link_co_err);
goto exit;
}
kfree_skb(tunnel_buf);
return 1;
}
/* First original message ?: */
if (tipc_link_is_up(dest_link)) {
pr_info("%s<%s>, changeover initiated by peer\n", link_rst_msg,
dest_link->name);
tipc_link_reset(dest_link);
dest_link->exp_msg_count = msg_count;
if (!msg_count)
goto exit;
} else if (dest_link->exp_msg_count == START_CHANGEOVER) {
dest_link->exp_msg_count = msg_count;
if (!msg_count)
goto exit;
}
/* Receive original message */
if (dest_link->exp_msg_count == 0) {
pr_warn("%sgot too many tunnelled messages\n", link_co_err);
goto exit;
}
dest_link->exp_msg_count--;
if (less(msg_seqno(msg), dest_link->reset_checkpoint)) {
goto exit;
} else {
*buf = buf_extract(tunnel_buf, INT_H_SIZE);
if (*buf != NULL) {
kfree_skb(tunnel_buf);
return 1;
} else {
pr_warn("%soriginal msg dropped\n", link_co_err);
}
}
exit:
*buf = NULL;
kfree_skb(tunnel_buf);
return 0;
}
/*
* Bundler functionality:
*/
void tipc_link_recv_bundle(struct sk_buff *buf)
{
u32 msgcount = msg_msgcnt(buf_msg(buf));
u32 pos = INT_H_SIZE;
struct sk_buff *obuf;
while (msgcount--) {
obuf = buf_extract(buf, pos);
if (obuf == NULL) {
pr_warn("Link unable to unbundle message(s)\n");
break;
}
pos += align(msg_size(buf_msg(obuf)));
tipc_net_route_msg(obuf);
}
kfree_skb(buf);
}
/*
* Fragmentation/defragmentation:
*/
/*
* link_send_long_buf: Entry for buffers needing fragmentation.
* The buffer is complete, inclusive total message length.
* Returns user data length.
*/
static int link_send_long_buf(struct tipc_link *l_ptr, struct sk_buff *buf)
{
struct sk_buff *buf_chain = NULL;
struct sk_buff *buf_chain_tail = (struct sk_buff *)&buf_chain;
struct tipc_msg *inmsg = buf_msg(buf);
struct tipc_msg fragm_hdr;
u32 insize = msg_size(inmsg);
u32 dsz = msg_data_sz(inmsg);
unchar *crs = buf->data;
u32 rest = insize;
u32 pack_sz = l_ptr->max_pkt;
u32 fragm_sz = pack_sz - INT_H_SIZE;
u32 fragm_no = 0;
u32 destaddr;
if (msg_short(inmsg))
destaddr = l_ptr->addr;
else
destaddr = msg_destnode(inmsg);
/* Prepare reusable fragment header: */
tipc_msg_init(&fragm_hdr, MSG_FRAGMENTER, FIRST_FRAGMENT,
INT_H_SIZE, destaddr);
/* Chop up message: */
while (rest > 0) {
struct sk_buff *fragm;
if (rest <= fragm_sz) {
fragm_sz = rest;
msg_set_type(&fragm_hdr, LAST_FRAGMENT);
}
fragm = tipc_buf_acquire(fragm_sz + INT_H_SIZE);
if (fragm == NULL) {
kfree_skb(buf);
while (buf_chain) {
buf = buf_chain;
buf_chain = buf_chain->next;
kfree_skb(buf);
}
return -ENOMEM;
}
msg_set_size(&fragm_hdr, fragm_sz + INT_H_SIZE);
fragm_no++;
msg_set_fragm_no(&fragm_hdr, fragm_no);
skb_copy_to_linear_data(fragm, &fragm_hdr, INT_H_SIZE);
skb_copy_to_linear_data_offset(fragm, INT_H_SIZE, crs,
fragm_sz);
buf_chain_tail->next = fragm;
buf_chain_tail = fragm;
rest -= fragm_sz;
crs += fragm_sz;
msg_set_type(&fragm_hdr, FRAGMENT);
}
kfree_skb(buf);
/* Append chain of fragments to send queue & send them */
l_ptr->long_msg_seq_no++;
link_add_chain_to_outqueue(l_ptr, buf_chain, l_ptr->long_msg_seq_no);
l_ptr->stats.sent_fragments += fragm_no;
l_ptr->stats.sent_fragmented++;
tipc_link_push_queue(l_ptr);
return dsz;
}
/*
* A pending message being re-assembled must store certain values
* to handle subsequent fragments correctly. The following functions
* help storing these values in unused, available fields in the
* pending message. This makes dynamic memory allocation unnecessary.
*/
static void set_long_msg_seqno(struct sk_buff *buf, u32 seqno)
{
msg_set_seqno(buf_msg(buf), seqno);
}
static u32 get_fragm_size(struct sk_buff *buf)
{
return msg_ack(buf_msg(buf));
}
static void set_fragm_size(struct sk_buff *buf, u32 sz)
{
msg_set_ack(buf_msg(buf), sz);
}
static u32 get_expected_frags(struct sk_buff *buf)
{
return msg_bcast_ack(buf_msg(buf));
}
static void set_expected_frags(struct sk_buff *buf, u32 exp)
{
msg_set_bcast_ack(buf_msg(buf), exp);
}
/*
* tipc_link_recv_fragment(): Called with node lock on. Returns
* the reassembled buffer if message is complete.
*/
int tipc_link_recv_fragment(struct sk_buff **pending, struct sk_buff **fb,
struct tipc_msg **m)
{
struct sk_buff *prev = NULL;
struct sk_buff *fbuf = *fb;
struct tipc_msg *fragm = buf_msg(fbuf);
struct sk_buff *pbuf = *pending;
u32 long_msg_seq_no = msg_long_msgno(fragm);
*fb = NULL;
/* Is there an incomplete message waiting for this fragment? */
while (pbuf && ((buf_seqno(pbuf) != long_msg_seq_no) ||
(msg_orignode(fragm) != msg_orignode(buf_msg(pbuf))))) {
prev = pbuf;
pbuf = pbuf->next;
}
if (!pbuf && (msg_type(fragm) == FIRST_FRAGMENT)) {
struct tipc_msg *imsg = (struct tipc_msg *)msg_data(fragm);
u32 msg_sz = msg_size(imsg);
u32 fragm_sz = msg_data_sz(fragm);
u32 exp_fragm_cnt;
u32 max = TIPC_MAX_USER_MSG_SIZE + NAMED_H_SIZE;
if (msg_type(imsg) == TIPC_MCAST_MSG)
max = TIPC_MAX_USER_MSG_SIZE + MCAST_H_SIZE;
if (fragm_sz == 0 || msg_size(imsg) > max) {
kfree_skb(fbuf);
return 0;
}
exp_fragm_cnt = msg_sz / fragm_sz + !!(msg_sz % fragm_sz);
pbuf = tipc_buf_acquire(msg_size(imsg));
if (pbuf != NULL) {
pbuf->next = *pending;
*pending = pbuf;
skb_copy_to_linear_data(pbuf, imsg,
msg_data_sz(fragm));
/* Prepare buffer for subsequent fragments. */
set_long_msg_seqno(pbuf, long_msg_seq_no);
set_fragm_size(pbuf, fragm_sz);
set_expected_frags(pbuf, exp_fragm_cnt - 1);
} else {
pr_debug("Link unable to reassemble fragmented message\n");
kfree_skb(fbuf);
return -1;
}
kfree_skb(fbuf);
return 0;
} else if (pbuf && (msg_type(fragm) != FIRST_FRAGMENT)) {
u32 dsz = msg_data_sz(fragm);
u32 fsz = get_fragm_size(pbuf);
u32 crs = ((msg_fragm_no(fragm) - 1) * fsz);
u32 exp_frags = get_expected_frags(pbuf) - 1;
skb_copy_to_linear_data_offset(pbuf, crs,
msg_data(fragm), dsz);
kfree_skb(fbuf);
/* Is message complete? */
if (exp_frags == 0) {
if (prev)
prev->next = pbuf->next;
else
*pending = pbuf->next;
msg_reset_reroute_cnt(buf_msg(pbuf));
*fb = pbuf;
*m = buf_msg(pbuf);
return 1;
}
set_expected_frags(pbuf, exp_frags);
return 0;
}
kfree_skb(fbuf);
return 0;
}
static void link_set_supervision_props(struct tipc_link *l_ptr, u32 tolerance)
{
if ((tolerance < TIPC_MIN_LINK_TOL) || (tolerance > TIPC_MAX_LINK_TOL))
return;
l_ptr->tolerance = tolerance;
l_ptr->continuity_interval =
((tolerance / 4) > 500) ? 500 : tolerance / 4;
l_ptr->abort_limit = tolerance / (l_ptr->continuity_interval / 4);
}
void tipc_link_set_queue_limits(struct tipc_link *l_ptr, u32 window)
{
/* Data messages from this node, inclusive FIRST_FRAGM */
l_ptr->queue_limit[TIPC_LOW_IMPORTANCE] = window;
l_ptr->queue_limit[TIPC_MEDIUM_IMPORTANCE] = (window / 3) * 4;
l_ptr->queue_limit[TIPC_HIGH_IMPORTANCE] = (window / 3) * 5;
l_ptr->queue_limit[TIPC_CRITICAL_IMPORTANCE] = (window / 3) * 6;
/* Transiting data messages,inclusive FIRST_FRAGM */
l_ptr->queue_limit[TIPC_LOW_IMPORTANCE + 4] = 300;
l_ptr->queue_limit[TIPC_MEDIUM_IMPORTANCE + 4] = 600;
l_ptr->queue_limit[TIPC_HIGH_IMPORTANCE + 4] = 900;
l_ptr->queue_limit[TIPC_CRITICAL_IMPORTANCE + 4] = 1200;
l_ptr->queue_limit[CONN_MANAGER] = 1200;
l_ptr->queue_limit[CHANGEOVER_PROTOCOL] = 2500;
l_ptr->queue_limit[NAME_DISTRIBUTOR] = 3000;
/* FRAGMENT and LAST_FRAGMENT packets */
l_ptr->queue_limit[MSG_FRAGMENTER] = 4000;
}
/**
* link_find_link - locate link by name
* @name: ptr to link name string
* @node: ptr to area to be filled with ptr to associated node
*
* Caller must hold 'tipc_net_lock' to ensure node and bearer are not deleted;
* this also prevents link deletion.
*
* Returns pointer to link (or 0 if invalid link name).
*/
static struct tipc_link *link_find_link(const char *name,
struct tipc_node **node)
{
struct tipc_link_name link_name_parts;
struct tipc_bearer *b_ptr;
struct tipc_link *l_ptr;
if (!link_name_validate(name, &link_name_parts))
return NULL;
b_ptr = tipc_bearer_find_interface(link_name_parts.if_local);
if (!b_ptr)
return NULL;
*node = tipc_node_find(link_name_parts.addr_peer);
if (!*node)
return NULL;
l_ptr = (*node)->links[b_ptr->identity];
if (!l_ptr || strcmp(l_ptr->name, name))
return NULL;
return l_ptr;
}
/**
* link_value_is_valid -- validate proposed link tolerance/priority/window
*
* @cmd: value type (TIPC_CMD_SET_LINK_*)
* @new_value: the new value
*
* Returns 1 if value is within range, 0 if not.
*/
static int link_value_is_valid(u16 cmd, u32 new_value)
{
switch (cmd) {
case TIPC_CMD_SET_LINK_TOL:
return (new_value >= TIPC_MIN_LINK_TOL) &&
(new_value <= TIPC_MAX_LINK_TOL);
case TIPC_CMD_SET_LINK_PRI:
return (new_value <= TIPC_MAX_LINK_PRI);
case TIPC_CMD_SET_LINK_WINDOW:
return (new_value >= TIPC_MIN_LINK_WIN) &&
(new_value <= TIPC_MAX_LINK_WIN);
}
return 0;
}
/**
* link_cmd_set_value - change priority/tolerance/window for link/bearer/media
* @name: ptr to link, bearer, or media name
* @new_value: new value of link, bearer, or media setting
* @cmd: which link, bearer, or media attribute to set (TIPC_CMD_SET_LINK_*)
*
* Caller must hold 'tipc_net_lock' to ensure link/bearer/media is not deleted.
*
* Returns 0 if value updated and negative value on error.
*/
static int link_cmd_set_value(const char *name, u32 new_value, u16 cmd)
{
struct tipc_node *node;
struct tipc_link *l_ptr;
struct tipc_bearer *b_ptr;
struct tipc_media *m_ptr;
l_ptr = link_find_link(name, &node);
if (l_ptr) {
/*
* acquire node lock for tipc_link_send_proto_msg().
* see "TIPC locking policy" in net.c.
*/
tipc_node_lock(node);
switch (cmd) {
case TIPC_CMD_SET_LINK_TOL:
link_set_supervision_props(l_ptr, new_value);
tipc_link_send_proto_msg(l_ptr,
STATE_MSG, 0, 0, new_value, 0, 0);
break;
case TIPC_CMD_SET_LINK_PRI:
l_ptr->priority = new_value;
tipc_link_send_proto_msg(l_ptr,
STATE_MSG, 0, 0, 0, new_value, 0);
break;
case TIPC_CMD_SET_LINK_WINDOW:
tipc_link_set_queue_limits(l_ptr, new_value);
break;
}
tipc_node_unlock(node);
return 0;
}
b_ptr = tipc_bearer_find(name);
if (b_ptr) {
switch (cmd) {
case TIPC_CMD_SET_LINK_TOL:
b_ptr->tolerance = new_value;
return 0;
case TIPC_CMD_SET_LINK_PRI:
b_ptr->priority = new_value;
return 0;
case TIPC_CMD_SET_LINK_WINDOW:
b_ptr->window = new_value;
return 0;
}
return -EINVAL;
}
m_ptr = tipc_media_find(name);
if (!m_ptr)
return -ENODEV;
switch (cmd) {
case TIPC_CMD_SET_LINK_TOL:
m_ptr->tolerance = new_value;
return 0;
case TIPC_CMD_SET_LINK_PRI:
m_ptr->priority = new_value;
return 0;
case TIPC_CMD_SET_LINK_WINDOW:
m_ptr->window = new_value;
return 0;
}
return -EINVAL;
}
struct sk_buff *tipc_link_cmd_config(const void *req_tlv_area, int req_tlv_space,
u16 cmd)
{
struct tipc_link_config *args;
u32 new_value;
int res;
if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_CONFIG))
return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
args = (struct tipc_link_config *)TLV_DATA(req_tlv_area);
new_value = ntohl(args->value);
if (!link_value_is_valid(cmd, new_value))
return tipc_cfg_reply_error_string(
"cannot change, value invalid");
if (!strcmp(args->name, tipc_bclink_name)) {
if ((cmd == TIPC_CMD_SET_LINK_WINDOW) &&
(tipc_bclink_set_queue_limits(new_value) == 0))
return tipc_cfg_reply_none();
return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
" (cannot change setting on broadcast link)");
}
read_lock_bh(&tipc_net_lock);
res = link_cmd_set_value(args->name, new_value, cmd);
read_unlock_bh(&tipc_net_lock);
if (res)
return tipc_cfg_reply_error_string("cannot change link setting");
return tipc_cfg_reply_none();
}
/**
* link_reset_statistics - reset link statistics
* @l_ptr: pointer to link
*/
static void link_reset_statistics(struct tipc_link *l_ptr)
{
memset(&l_ptr->stats, 0, sizeof(l_ptr->stats));
l_ptr->stats.sent_info = l_ptr->next_out_no;
l_ptr->stats.recv_info = l_ptr->next_in_no;
}
struct sk_buff *tipc_link_cmd_reset_stats(const void *req_tlv_area, int req_tlv_space)
{
char *link_name;
struct tipc_link *l_ptr;
struct tipc_node *node;
if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_NAME))
return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
link_name = (char *)TLV_DATA(req_tlv_area);
if (!strcmp(link_name, tipc_bclink_name)) {
if (tipc_bclink_reset_stats())
return tipc_cfg_reply_error_string("link not found");
return tipc_cfg_reply_none();
}
read_lock_bh(&tipc_net_lock);
l_ptr = link_find_link(link_name, &node);
if (!l_ptr) {
read_unlock_bh(&tipc_net_lock);
return tipc_cfg_reply_error_string("link not found");
}
tipc_node_lock(node);
link_reset_statistics(l_ptr);
tipc_node_unlock(node);
read_unlock_bh(&tipc_net_lock);
return tipc_cfg_reply_none();
}
/**
* percent - convert count to a percentage of total (rounding up or down)
*/
static u32 percent(u32 count, u32 total)
{
return (count * 100 + (total / 2)) / total;
}
/**
* tipc_link_stats - print link statistics
* @name: link name
* @buf: print buffer area
* @buf_size: size of print buffer area
*
* Returns length of print buffer data string (or 0 if error)
*/
static int tipc_link_stats(const char *name, char *buf, const u32 buf_size)
{
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
struct tipc_link *l;
struct tipc_stats *s;
struct tipc_node *node;
char *status;
u32 profile_total = 0;
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
int ret;
if (!strcmp(name, tipc_bclink_name))
return tipc_bclink_stats(buf, buf_size);
read_lock_bh(&tipc_net_lock);
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
l = link_find_link(name, &node);
if (!l) {
read_unlock_bh(&tipc_net_lock);
return 0;
}
tipc_node_lock(node);
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
s = &l->stats;
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
if (tipc_link_is_active(l))
status = "ACTIVE";
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
else if (tipc_link_is_up(l))
status = "STANDBY";
else
status = "DEFUNCT";
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
ret = tipc_snprintf(buf, buf_size, "Link <%s>\n"
" %s MTU:%u Priority:%u Tolerance:%u ms"
" Window:%u packets\n",
l->name, status, l->max_pkt, l->priority,
l->tolerance, l->queue_limit[0]);
ret += tipc_snprintf(buf + ret, buf_size - ret,
" RX packets:%u fragments:%u/%u bundles:%u/%u\n",
l->next_in_no - s->recv_info, s->recv_fragments,
s->recv_fragmented, s->recv_bundles,
s->recv_bundled);
ret += tipc_snprintf(buf + ret, buf_size - ret,
" TX packets:%u fragments:%u/%u bundles:%u/%u\n",
l->next_out_no - s->sent_info, s->sent_fragments,
s->sent_fragmented, s->sent_bundles,
s->sent_bundled);
profile_total = s->msg_length_counts;
if (!profile_total)
profile_total = 1;
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
ret += tipc_snprintf(buf + ret, buf_size - ret,
" TX profile sample:%u packets average:%u octets\n"
" 0-64:%u%% -256:%u%% -1024:%u%% -4096:%u%% "
"-16384:%u%% -32768:%u%% -66000:%u%%\n",
s->msg_length_counts,
s->msg_lengths_total / profile_total,
percent(s->msg_length_profile[0], profile_total),
percent(s->msg_length_profile[1], profile_total),
percent(s->msg_length_profile[2], profile_total),
percent(s->msg_length_profile[3], profile_total),
percent(s->msg_length_profile[4], profile_total),
percent(s->msg_length_profile[5], profile_total),
percent(s->msg_length_profile[6], profile_total));
ret += tipc_snprintf(buf + ret, buf_size - ret,
" RX states:%u probes:%u naks:%u defs:%u"
" dups:%u\n", s->recv_states, s->recv_probes,
s->recv_nacks, s->deferred_recv, s->duplicates);
ret += tipc_snprintf(buf + ret, buf_size - ret,
" TX states:%u probes:%u naks:%u acks:%u"
" dups:%u\n", s->sent_states, s->sent_probes,
s->sent_nacks, s->sent_acks, s->retransmitted);
ret += tipc_snprintf(buf + ret, buf_size - ret,
" Congestion link:%u Send queue"
" max:%u avg:%u\n", s->link_congs,
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
s->max_queue_sz, s->queue_sz_counts ?
(s->accu_queue_sz / s->queue_sz_counts) : 0);
tipc_node_unlock(node);
read_unlock_bh(&tipc_net_lock);
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
return ret;
}
struct sk_buff *tipc_link_cmd_show_stats(const void *req_tlv_area, int req_tlv_space)
{
struct sk_buff *buf;
struct tlv_desc *rep_tlv;
int str_len;
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
int pb_len;
char *pb;
if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_NAME))
return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
buf = tipc_cfg_reply_alloc(TLV_SPACE(ULTRA_STRING_MAX_LEN));
if (!buf)
return NULL;
rep_tlv = (struct tlv_desc *)buf->data;
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
pb = TLV_DATA(rep_tlv);
pb_len = ULTRA_STRING_MAX_LEN;
str_len = tipc_link_stats((char *)TLV_DATA(req_tlv_area),
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
pb, pb_len);
if (!str_len) {
kfree_skb(buf);
return tipc_cfg_reply_error_string("link not found");
}
tipc: phase out most of the struct print_buf usage The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-06-29 04:50:23 +00:00
str_len += 1; /* for "\0" */
skb_put(buf, TLV_SPACE(str_len));
TLV_SET(rep_tlv, TIPC_TLV_ULTRA_STRING, NULL, str_len);
return buf;
}
/**
* tipc_link_get_max_pkt - get maximum packet size to use when sending to destination
* @dest: network address of destination node
* @selector: used to select from set of active links
*
* If no active link can be found, uses default maximum packet size.
*/
u32 tipc_link_get_max_pkt(u32 dest, u32 selector)
{
struct tipc_node *n_ptr;
struct tipc_link *l_ptr;
u32 res = MAX_PKT_DEFAULT;
if (dest == tipc_own_addr)
return MAX_MSG_SIZE;
read_lock_bh(&tipc_net_lock);
n_ptr = tipc_node_find(dest);
if (n_ptr) {
tipc_node_lock(n_ptr);
l_ptr = n_ptr->active_links[selector & 1];
if (l_ptr)
res = l_ptr->max_pkt;
tipc_node_unlock(n_ptr);
}
read_unlock_bh(&tipc_net_lock);
return res;
}
static void link_print(struct tipc_link *l_ptr, const char *str)
{
pr_info("%s Link %x<%s>:", str, l_ptr->addr, l_ptr->b_ptr->name);
if (link_working_unknown(l_ptr))
pr_cont(":WU\n");
else if (link_reset_reset(l_ptr))
pr_cont(":RR\n");
else if (link_reset_unknown(l_ptr))
pr_cont(":RU\n");
else if (link_working_working(l_ptr))
pr_cont(":WW\n");
else
pr_cont("\n");
}