Piteball/android_kernel_samsung_msm8976
1
1
Fork 0
mirror of https://github.com/team-infusion-developers/android_kernel_samsung_msm8976.git synced 2024-11-01 10:33:27 +00:00
Code Issues Projects Releases Wiki Activity
android_kernel_samsung_msm8976/drivers/base/regmap/regmap-irq.c

316 lines
8 KiB
C
Raw Normal View History

regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
/*
* regmap based irq_chip
*
* Copyright 2011 Wolfson Microelectronics plc
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/export.h>
device.h: cleanup users outside of linux/include (C files) For files that are actively using linux/device.h, make sure that they call it out. This will allow us to clean up some of the implicit uses of linux/device.h within include/* without introducing build regressions. Yes, this was created by "cheating" -- i.e. the headers were cleaned up, and then the fallout was found and fixed, and then the two commits were reordered. This ensures we don't introduce build regressions into the git history. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-01-22 16:23:42 +00:00
#include <linux/device.h>
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
#include <linux/regmap.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include "internal.h"
struct regmap_irq_chip_data {
struct mutex lock;
struct regmap *map;
struct regmap_irq_chip *chip;
int irq_base;
void *status_reg_buf;
unsigned int *status_buf;
unsigned int *mask_buf;
unsigned int *mask_buf_def;
};
static inline const
struct regmap_irq *irq_to_regmap_irq(struct regmap_irq_chip_data *data,
int irq)
{
return &data->chip->irqs[irq - data->irq_base];
}
static void regmap_irq_lock(struct irq_data *data)
{
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
mutex_lock(&d->lock);
}
static void regmap_irq_sync_unlock(struct irq_data *data)
{
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
int i, ret;
/*
* If there's been a change in the mask write it back to the
* hardware. We rely on the use of the regmap core cache to
* suppress pointless writes.
*/
for (i = 0; i < d->chip->num_regs; i++) {
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 19:40:24 +00:00
ret = regmap_update_bits(d->map, d->chip->mask_base +
(i * map->map->reg_stride),
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
d->mask_buf_def[i], d->mask_buf[i]);
if (ret != 0)
dev_err(d->map->dev, "Failed to sync masks in %x\n",
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 19:40:24 +00:00
d->chip->mask_base + (i * map->reg_stride));
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
}
mutex_unlock(&d->lock);
}
static void regmap_irq_enable(struct irq_data *data)
{
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->irq);
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 19:40:24 +00:00
d->mask_buf[irq_data->reg_offset / map->reg_stride] &= ~irq_data->mask;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
}
static void regmap_irq_disable(struct irq_data *data)
{
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->irq);
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 19:40:24 +00:00
d->mask_buf[irq_data->reg_offset / map->reg_stride] |= irq_data->mask;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
}
static struct irq_chip regmap_irq_chip = {
.name = "regmap",
.irq_bus_lock = regmap_irq_lock,
.irq_bus_sync_unlock = regmap_irq_sync_unlock,
.irq_disable = regmap_irq_disable,
.irq_enable = regmap_irq_enable,
};
static irqreturn_t regmap_irq_thread(int irq, void *d)
{
struct regmap_irq_chip_data *data = d;
struct regmap_irq_chip *chip = data->chip;
struct regmap *map = data->map;
int ret, i;
u8 *buf8 = data->status_reg_buf;
u16 *buf16 = data->status_reg_buf;
u32 *buf32 = data->status_reg_buf;
regmap: Report if we actually handled an interrupt in regmap-irq While the IRQ core doesn't currently support shared threaded interrupts that's no reason for drivers not to do their bit and report IRQ_NONE when they don't get an interrupt. This allows the core spurious/wedget interrupt detection support to do its thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28 18:50:39 +00:00
bool handled = false;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
ret = regmap_bulk_read(map, chip->status_base, data->status_reg_buf,
chip->num_regs);
if (ret != 0) {
dev_err(map->dev, "Failed to read IRQ status: %d\n", ret);
return IRQ_NONE;
}
/*
* Ignore masked IRQs and ack if we need to; we ack early so
* there is no race between handling and acknowleding the
* interrupt. We assume that typically few of the interrupts
* will fire simultaneously so don't worry about overhead from
* doing a write per register.
*/
for (i = 0; i < data->chip->num_regs; i++) {
switch (map->format.val_bytes) {
case 1:
data->status_buf[i] = buf8[i];
break;
case 2:
data->status_buf[i] = buf16[i];
break;
case 4:
data->status_buf[i] = buf32[i];
break;
default:
BUG();
return IRQ_NONE;
}
data->status_buf[i] &= ~data->mask_buf[i];
if (data->status_buf[i] && chip->ack_base) {
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 19:40:24 +00:00
ret = regmap_write(map, chip->ack_base +
(i * map->reg_stride),
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
data->status_buf[i]);
if (ret != 0)
dev_err(map->dev, "Failed to ack 0x%x: %d\n",
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 19:40:24 +00:00
chip->ack_base + (i * map->reg_stride),
ret);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
}
}
for (i = 0; i < chip->num_irqs; i++) {
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 19:40:24 +00:00
if (data->status_buf[chip->irqs[i].reg_offset /
map->reg_stride] & chip->irqs[i].mask) {
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
handle_nested_irq(data->irq_base + i);
regmap: Report if we actually handled an interrupt in regmap-irq While the IRQ core doesn't currently support shared threaded interrupts that's no reason for drivers not to do their bit and report IRQ_NONE when they don't get an interrupt. This allows the core spurious/wedget interrupt detection support to do its thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28 18:50:39 +00:00
handled = true;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
}
}
regmap: Report if we actually handled an interrupt in regmap-irq While the IRQ core doesn't currently support shared threaded interrupts that's no reason for drivers not to do their bit and report IRQ_NONE when they don't get an interrupt. This allows the core spurious/wedget interrupt detection support to do its thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28 18:50:39 +00:00
if (handled)
return IRQ_HANDLED;
else
return IRQ_NONE;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
}
/**
* regmap_add_irq_chip(): Use standard regmap IRQ controller handling
*
* map: The regmap for the device.
* irq: The IRQ the device uses to signal interrupts
* irq_flags: The IRQF_ flags to use for the primary interrupt.
* chip: Configuration for the interrupt controller.
* data: Runtime data structure for the controller, allocated on success
*
* Returns 0 on success or an errno on failure.
*
* In order for this to be efficient the chip really should use a
* register cache. The chip driver is responsible for restoring the
* register values used by the IRQ controller over suspend and resume.
*/
int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
int irq_base, struct regmap_irq_chip *chip,
struct regmap_irq_chip_data **data)
{
struct regmap_irq_chip_data *d;
int cur_irq, i;
int ret = -ENOMEM;
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 19:40:24 +00:00
for (i = 0; i < chip->num_irqs; i++) {
if (chip->irqs[i].reg_offset % map->reg_stride)
return -EINVAL;
if (chip->irqs[i].reg_offset / map->reg_stride >=
chip->num_regs)
return -EINVAL;
}
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
irq_base = irq_alloc_descs(irq_base, 0, chip->num_irqs, 0);
if (irq_base < 0) {
dev_warn(map->dev, "Failed to allocate IRQs: %d\n",
irq_base);
return irq_base;
}
d = kzalloc(sizeof(*d), GFP_KERNEL);
if (!d)
return -ENOMEM;
d->status_buf = kzalloc(sizeof(unsigned int) * chip->num_regs,
GFP_KERNEL);
if (!d->status_buf)
goto err_alloc;
d->status_reg_buf = kzalloc(map->format.val_bytes * chip->num_regs,
GFP_KERNEL);
if (!d->status_reg_buf)
goto err_alloc;
d->mask_buf = kzalloc(sizeof(unsigned int) * chip->num_regs,
GFP_KERNEL);
if (!d->mask_buf)
goto err_alloc;
d->mask_buf_def = kzalloc(sizeof(unsigned int) * chip->num_regs,
GFP_KERNEL);
if (!d->mask_buf_def)
goto err_alloc;
d->map = map;
d->chip = chip;
d->irq_base = irq_base;
mutex_init(&d->lock);
for (i = 0; i < chip->num_irqs; i++)
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 19:40:24 +00:00
d->mask_buf_def[chip->irqs[i].reg_offset / map->reg_stride]
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
|= chip->irqs[i].mask;
/* Mask all the interrupts by default */
for (i = 0; i < chip->num_regs; i++) {
d->mask_buf[i] = d->mask_buf_def[i];
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 19:40:24 +00:00
ret = regmap_write(map, chip->mask_base + (i * map->reg_stride),
d->mask_buf[i]);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
if (ret != 0) {
dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 19:40:24 +00:00
chip->mask_base + (i * map->reg_stride), ret);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-28 21:50:49 +00:00
goto err_alloc;
}
}
/* Register them with genirq */
for (cur_irq = irq_base;
cur_irq < chip->num_irqs + irq_base;
cur_irq++) {
irq_set_chip_data(cur_irq, d);
irq_set_chip_and_handler(cur_irq, &regmap_irq_chip,
handle_edge_irq);
irq_set_nested_thread(cur_irq, 1);
/* ARM needs us to explicitly flag the IRQ as valid
* and will set them noprobe when we do so. */
#ifdef CONFIG_ARM
set_irq_flags(cur_irq, IRQF_VALID);
#else
irq_set_noprobe(cur_irq);
#endif
}
ret = request_threaded_irq(irq, NULL, regmap_irq_thread, irq_flags,
chip->name, d);
if (ret != 0) {
dev_err(map->dev, "Failed to request IRQ %d: %d\n", irq, ret);
goto err_alloc;
}
return 0;
err_alloc:
kfree(d->mask_buf_def);
kfree(d->mask_buf);
kfree(d->status_reg_buf);
kfree(d->status_buf);
kfree(d);
return ret;
}
EXPORT_SYMBOL_GPL(regmap_add_irq_chip);
/**
* regmap_del_irq_chip(): Stop interrupt handling for a regmap IRQ chip
*
* @irq: Primary IRQ for the device
* @d: regmap_irq_chip_data allocated by regmap_add_irq_chip()
*/
void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d)
{
if (!d)
return;
free_irq(irq, d);
kfree(d->mask_buf_def);
kfree(d->mask_buf);
kfree(d->status_reg_buf);
kfree(d->status_buf);
kfree(d);
}
EXPORT_SYMBOL_GPL(regmap_del_irq_chip);
regmap: Add irq_base accessor to regmap_irq Allows devices to discover their own interrupt without having to remember it themselves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-05 16:10:15 +00:00
/**
* regmap_irq_chip_get_base(): Retrieve interrupt base for a regmap IRQ chip
*
* Useful for drivers to request their own IRQs.
*
* @data: regmap_irq controller to operate on.
*/
int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data)
{
return data->irq_base;
}
EXPORT_SYMBOL_GPL(regmap_irq_chip_get_base);
Reference in a new issue Copy permalink