Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

This commit is contained in:
Arnd Bergmann 2012-02-27 15:17:50 +00:00
commit 003e634863
16 changed files with 110 additions and 22 deletions

View file

@ -416,13 +416,13 @@ static void __init innovator_init(void)
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
omap1_usb_init(&innovator1510_usb_config);
innovator_config[1].data = &innovator1510_lcd_config;
innovator_config[0].data = &innovator1510_lcd_config;
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (cpu_is_omap1610()) {
omap1_usb_init(&h2_usb_config);
innovator_config[1].data = &innovator1610_lcd_config;
innovator_config[0].data = &innovator1610_lcd_config;
}
#endif
omap_board_config = innovator_config;

View file

@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING
going on could result in system crashes;
config OMAP4_ERRATA_I688
bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
depends on ARCH_OMAP4 && BROKEN
bool "OMAP4 errata: Async Bridge Corruption"
depends on ARCH_OMAP4
select ARCH_HAS_BARRIERS
help
If a data is stalled inside asynchronous bridge because of back

View file

@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
else
*openp = 0;
#ifdef CONFIG_MMC_OMAP
omap_mmc_notify_cover_event(mmc_device, index, *openp);
#else
pr_warn("MMC: notify cover event not available\n");
#endif
}
static int n8x0_mmc_late_init(struct device *dev)

View file

@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
platform_device_register(&leds_gpio);

View file

@ -132,6 +132,7 @@ void omap3_map_io(void);
void am33xx_map_io(void);
void omap4_map_io(void);
void ti81xx_map_io(void);
void omap_barriers_init(void);
/**
* omap_test_timeout - busy-loop, testing a condition

View file

@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
struct timespec ts_preidle, ts_postidle, ts_idle;
u32 cpu1_state;
int idle_time;
int new_state_idx;
int cpu_id = smp_processor_id();
/* Used to keep track of the total time in idle */
@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
*/
cpu1_state = pwrdm_read_pwrst(cpu1_pd);
if (cpu1_state != PWRDM_POWER_OFF) {
new_state_idx = drv->safe_state_index;
cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
index = drv->safe_state_index;
cx = cpuidle_get_statedata(&dev->states_usage[index]);
}
if (index > 0)

View file

@ -19,6 +19,8 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <plat/board.h>
#include <plat/gpmc.h>
@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
.flags = SMSC911X_USE_16BIT,
};
static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
};
/* Generic regulator definition to satisfy smsc911x */
static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply),
.consumer_supplies = gpmc_smsc911x_supply,
};
static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
.supply_name = "gpmc_smsc911x",
.microvolts = 3300000,
.gpio = -EINVAL,
.startup_delay = 0,
.enable_high = 0,
.enabled_at_boot = 1,
.init_data = &gpmc_smsc911x_reg_init_data,
};
/*
* Platform device id of 42 is a temporary fix to avoid conflicts
* with other reg-fixed-voltage devices. The real fix should
* involve the driver core providing a way of dynamically
* assigning a unique id on registration for platform devices
* in the same name space.
*/
static struct platform_device gpmc_smsc911x_regulator = {
.name = "reg-fixed-voltage",
.id = 42,
.dev = {
.platform_data = &gpmc_smsc911x_fixed_reg_data,
},
};
/*
* Initialize smsc911x device connected to the GPMC. Note that we
* assume that pin multiplexing is done in the board-*.c file,
@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
gpmc_cfg = board_data;
ret = platform_device_register(&gpmc_smsc911x_regulator);
if (ret < 0) {
pr_err("Unable to register smsc911x regulators: %d\n", ret);
return;
}
if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
pr_err("Failed to request GPMC mem region\n");
return;

View file

@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
return 0;
}
static int omap_hsmmc_done;
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
u32 reg;
if (omap_hsmmc_done)
return;
omap_hsmmc_done = 1;
if (!cpu_is_omap44xx()) {
if (cpu_is_omap2430()) {
control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;

View file

@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void)
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
omap_barriers_init();
}
#endif

View file

@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
.ops = &omap2_mbox_ops,
.priv = &omap2_mbox_iva_priv,
};
#endif
struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
#ifdef CONFIG_ARCH_OMAP2
struct omap_mbox *omap2_mboxes[] = {
&mbox_dsp_info,
#ifdef CONFIG_SOC_OMAP2420
&mbox_iva_info,
#endif
NULL
};
#endif
#if defined(CONFIG_ARCH_OMAP4)

View file

@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
return -ENODEV;
}
static int __init
static int
omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)

View file

@ -24,6 +24,7 @@
#include <plat/irqs.h>
#include <plat/sram.h>
#include <plat/omap-secure.h>
#include <mach/hardware.h>
#include <mach/omap-wakeupgen.h>
@ -43,6 +44,9 @@ static void __iomem *sar_ram_base;
void __iomem *dram_sync, *sram_sync;
static phys_addr_t paddr;
static u32 size;
void omap_bus_sync(void)
{
if (dram_sync && sram_sync) {
@ -52,18 +56,20 @@ void omap_bus_sync(void)
}
}
static int __init omap_barriers_init(void)
/* Steal one page physical memory for barrier implementation */
int __init omap_barrier_reserve_memblock(void)
{
struct map_desc dram_io_desc[1];
phys_addr_t paddr;
u32 size;
if (!cpu_is_omap44xx())
return -ENODEV;
size = ALIGN(PAGE_SIZE, SZ_1M);
paddr = arm_memblock_steal(size, SZ_1M);
return 0;
}
void __init omap_barriers_init(void)
{
struct map_desc dram_io_desc[1];
dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
dram_io_desc[0].pfn = __phys_to_pfn(paddr);
dram_io_desc[0].length = size;
@ -75,9 +81,10 @@ static int __init omap_barriers_init(void)
pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
(long long) paddr, dram_io_desc[0].virtual);
return 0;
}
core_initcall(omap_barriers_init);
#else
void __init omap_barriers_init(void)
{}
#endif
void __init gic_init_irq(void)

View file

@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
freq = clk->rate;
clk_put(clk);
rcu_read_lock();
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
rcu_read_unlock();
pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
rcu_read_unlock();
if (!bootup_volt) {
pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);

View file

@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
{
struct omap_hwmod *oh[2];
struct omap_device *od;
struct platform_device *pdev;
int bus_id = -1;
int i;
@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
return;
}
od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
(void *)&usbhs_data, sizeof(usbhs_data),
omap_uhhtll_latency,
ARRAY_SIZE(omap_uhhtll_latency), false);
if (IS_ERR(od)) {
if (IS_ERR(pdev)) {
pr_err("Could not build hwmod devices %s,%s\n",
USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
return;

View file

@ -69,6 +69,7 @@ void __init omap_reserve(void)
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock();
omap_secure_ram_reserve_memblock();
omap_barrier_reserve_memblock();
}
void __init omap_init_consistent_dma_size(void)

View file

@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void)
{ }
#endif
#ifdef CONFIG_OMAP4_ERRATA_I688
extern int omap_barrier_reserve_memblock(void);
#else
static inline void omap_barrier_reserve_memblock(void)
{ }
#endif
#endif /* __OMAP_SECURE_H__ */