mirror of
https://github.com/team-infusion-developers/android_kernel_samsung_msm8976.git
synced 2024-11-07 04:09:21 +00:00
pata_at91: SMC settings calculation bugfixes, support for t6z and IORDY
* New code correctly calculates SMC registers values, adjusts calculated to admissible ranges, enlarges cycles when required and converts values into SMC's format. * Support for TDF cycles (ATA t6z) and IORDY line added. * Eliminate need in the initial_timing structure. * Code cleanup. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
Igor Plyatov
Jeff Garzik
parent
af649a1b56
commit
0144261fa6
1 changed files with 193 additions and 94 deletions
|
|
@ -3,6 +3,7 @@
|
|||
* with CompactFlash interface in True IDE mode
|
||||
*
|
||||
* Copyright (C) 2009 Matyukevich Sergey
|
||||
* 2011 Igor Plyatov
|
||||
*
|
||||
* Based on:
|
||||
* * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
|
||||
|
|
@ -31,38 +32,150 @@
|
|||
#include <mach/board.h>
|
||||
#include <mach/gpio.h>
|
||||
|
||||
#define DRV_NAME "pata_at91"
|
||||
#define DRV_VERSION "0.3"
|
||||
|
||||
#define DRV_NAME "pata_at91"
|
||||
#define DRV_VERSION "0.2"
|
||||
|
||||
#define CF_IDE_OFFSET 0x00c00000
|
||||
#define CF_ALT_IDE_OFFSET 0x00e00000
|
||||
#define CF_IDE_RES_SIZE 0x08
|
||||
#define NCS_RD_PULSE_LIMIT 0x3f /* maximal value for pulse bitfields */
|
||||
#define CF_IDE_OFFSET 0x00c00000
|
||||
#define CF_ALT_IDE_OFFSET 0x00e00000
|
||||
#define CF_IDE_RES_SIZE 0x08
|
||||
#define CS_PULSE_MAXIMUM 319
|
||||
#define ER_SMC_CALC 1
|
||||
#define ER_SMC_RECALC 2
|
||||
|
||||
struct at91_ide_info {
|
||||
unsigned long mode;
|
||||
unsigned int cs;
|
||||
|
||||
struct clk *mck;
|
||||
|
||||
void __iomem *ide_addr;
|
||||
void __iomem *alt_addr;
|
||||
};
|
||||
|
||||
static const struct ata_timing initial_timing = {
|
||||
.mode = XFER_PIO_0,
|
||||
.setup = 70,
|
||||
.act8b = 290,
|
||||
.rec8b = 240,
|
||||
.cyc8b = 600,
|
||||
.active = 165,
|
||||
.recover = 150,
|
||||
.dmack_hold = 0,
|
||||
.cycle = 600,
|
||||
.udma = 0
|
||||
/**
|
||||
* struct smc_range - range of valid values for SMC register.
|
||||
*/
|
||||
struct smc_range {
|
||||
int min;
|
||||
int max;
|
||||
};
|
||||
|
||||
/**
|
||||
* adjust_smc_value - adjust value for one of SMC registers.
|
||||
* @value: adjusted value
|
||||
* @range: array of SMC ranges with valid values
|
||||
* @size: SMC ranges array size
|
||||
*
|
||||
* This returns the difference between input and output value or negative
|
||||
* in case of invalid input value.
|
||||
* If negative returned, then output value = maximal possible from ranges.
|
||||
*/
|
||||
static int adjust_smc_value(int *value, struct smc_range *range, int size)
|
||||
{
|
||||
int maximum = (range + size - 1)->max;
|
||||
int remainder;
|
||||
|
||||
do {
|
||||
if (*value < range->min) {
|
||||
remainder = range->min - *value;
|
||||
*value = range->min; /* nearest valid value */
|
||||
return remainder;
|
||||
} else if ((range->min <= *value) && (*value <= range->max))
|
||||
return 0;
|
||||
|
||||
range++;
|
||||
} while (--size);
|
||||
*value = maximum;
|
||||
|
||||
return -1; /* invalid value */
|
||||
}
|
||||
|
||||
/**
|
||||
* calc_smc_vals - calculate SMC register values
|
||||
* @dev: ATA device
|
||||
* @setup: SMC_SETUP register value
|
||||
* @pulse: SMC_PULSE register value
|
||||
* @cycle: SMC_CYCLE register value
|
||||
*
|
||||
* This returns negative in case of invalid values for SMC registers:
|
||||
* -ER_SMC_RECALC - recalculation required for SMC values,
|
||||
* -ER_SMC_CALC - calculation failed (invalid input values).
|
||||
*
|
||||
* SMC use special coding scheme, see "Coding and Range of Timing
|
||||
* Parameters" table from AT91SAM9 datasheets.
|
||||
*
|
||||
* SMC_SETUP = 128*setup[5] + setup[4:0]
|
||||
* SMC_PULSE = 256*pulse[6] + pulse[5:0]
|
||||
* SMC_CYCLE = 256*cycle[8:7] + cycle[6:0]
|
||||
*/
|
||||
static int calc_smc_vals(struct device *dev,
|
||||
int *setup, int *pulse, int *cycle, int *cs_pulse)
|
||||
{
|
||||
int ret_val;
|
||||
int err = 0;
|
||||
struct smc_range range_setup[] = { /* SMC_SETUP valid values */
|
||||
{.min = 0, .max = 31}, /* first range */
|
||||
{.min = 128, .max = 159} /* second range */
|
||||
};
|
||||
struct smc_range range_pulse[] = { /* SMC_PULSE valid values */
|
||||
{.min = 0, .max = 63}, /* first range */
|
||||
{.min = 256, .max = 319} /* second range */
|
||||
};
|
||||
struct smc_range range_cycle[] = { /* SMC_CYCLE valid values */
|
||||
{.min = 0, .max = 127}, /* first range */
|
||||
{.min = 256, .max = 383}, /* second range */
|
||||
{.min = 512, .max = 639}, /* third range */
|
||||
{.min = 768, .max = 895} /* fourth range */
|
||||
};
|
||||
|
||||
ret_val = adjust_smc_value(setup, range_setup, ARRAY_SIZE(range_setup));
|
||||
if (ret_val < 0)
|
||||
dev_warn(dev, "maximal SMC Setup value\n");
|
||||
else
|
||||
*cycle += ret_val;
|
||||
|
||||
ret_val = adjust_smc_value(pulse, range_pulse, ARRAY_SIZE(range_pulse));
|
||||
if (ret_val < 0)
|
||||
dev_warn(dev, "maximal SMC Pulse value\n");
|
||||
else
|
||||
*cycle += ret_val;
|
||||
|
||||
ret_val = adjust_smc_value(cycle, range_cycle, ARRAY_SIZE(range_cycle));
|
||||
if (ret_val < 0)
|
||||
dev_warn(dev, "maximal SMC Cycle value\n");
|
||||
|
||||
*cs_pulse = *cycle;
|
||||
if (*cs_pulse > CS_PULSE_MAXIMUM) {
|
||||
dev_err(dev, "unable to calculate valid SMC settings\n");
|
||||
return -ER_SMC_CALC;
|
||||
}
|
||||
|
||||
ret_val = adjust_smc_value(cs_pulse, range_pulse,
|
||||
ARRAY_SIZE(range_pulse));
|
||||
if (ret_val < 0) {
|
||||
dev_warn(dev, "maximal SMC CS Pulse value\n");
|
||||
} else if (ret_val != 0) {
|
||||
*cycle = *cs_pulse;
|
||||
dev_warn(dev, "SMC Cycle extended\n");
|
||||
err = -ER_SMC_RECALC;
|
||||
}
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
/**
|
||||
* to_smc_format - convert values into SMC format
|
||||
* @setup: SETUP value of SMC Setup Register
|
||||
* @pulse: PULSE value of SMC Pulse Register
|
||||
* @cycle: CYCLE value of SMC Cycle Register
|
||||
* @cs_pulse: NCS_PULSE value of SMC Pulse Register
|
||||
*/
|
||||
static void to_smc_format(int *setup, int *pulse, int *cycle, int *cs_pulse)
|
||||
{
|
||||
*setup = (*setup & 0x1f) | ((*setup & 0x80) >> 2);
|
||||
*pulse = (*pulse & 0x3f) | ((*pulse & 0x100) >> 2);
|
||||
*cycle = (*cycle & 0x7f) | ((*cycle & 0x300) >> 1);
|
||||
*cs_pulse = (*cs_pulse & 0x3f) | ((*cs_pulse & 0x100) >> 2);
|
||||
}
|
||||
|
||||
static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
|
||||
{
|
||||
unsigned long mul;
|
||||
|
|
@ -80,85 +193,77 @@ static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
|
|||
return (ns * mul + 65536) >> 16; /* rounding */
|
||||
}
|
||||
|
||||
static void set_smc_mode(struct at91_ide_info *info)
|
||||
{
|
||||
at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
|
||||
return;
|
||||
}
|
||||
|
||||
static void set_smc_timing(struct device *dev,
|
||||
/**
|
||||
* set_smc_timing - SMC timings setup.
|
||||
* @dev: device
|
||||
* @info: AT91 IDE info
|
||||
* @ata: ATA timings
|
||||
*
|
||||
* Its assumed that write timings are same as read timings,
|
||||
* cs_setup = 0 and cs_pulse = cycle.
|
||||
*/
|
||||
static void set_smc_timing(struct device *dev, struct ata_device *adev,
|
||||
struct at91_ide_info *info, const struct ata_timing *ata)
|
||||
{
|
||||
unsigned long read_cycle, write_cycle, active, recover;
|
||||
unsigned long nrd_setup, nrd_pulse, nrd_recover;
|
||||
unsigned long nwe_setup, nwe_pulse;
|
||||
|
||||
unsigned long ncs_write_setup, ncs_write_pulse;
|
||||
unsigned long ncs_read_setup, ncs_read_pulse;
|
||||
|
||||
unsigned long mck_hz;
|
||||
|
||||
read_cycle = ata->cyc8b;
|
||||
nrd_setup = ata->setup;
|
||||
nrd_pulse = ata->act8b;
|
||||
nrd_recover = ata->rec8b;
|
||||
int ret = 0;
|
||||
int use_iordy;
|
||||
unsigned int t6z; /* data tristate time in ns */
|
||||
unsigned int cycle; /* SMC Cycle width in MCK ticks */
|
||||
unsigned int setup; /* SMC Setup width in MCK ticks */
|
||||
unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */
|
||||
unsigned int cs_setup = 0;/* CS4 or CS5 setup width in MCK ticks */
|
||||
unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/
|
||||
unsigned int tdf_cycles; /* SMC TDF MCK ticks */
|
||||
unsigned long mck_hz; /* MCK frequency in Hz */
|
||||
|
||||
t6z = (ata->mode < XFER_PIO_5) ? 30 : 20;
|
||||
mck_hz = clk_get_rate(info->mck);
|
||||
cycle = calc_mck_cycles(ata->cyc8b, mck_hz);
|
||||
setup = calc_mck_cycles(ata->setup, mck_hz);
|
||||
pulse = calc_mck_cycles(ata->act8b, mck_hz);
|
||||
tdf_cycles = calc_mck_cycles(t6z, mck_hz);
|
||||
|
||||
read_cycle = calc_mck_cycles(read_cycle, mck_hz);
|
||||
nrd_setup = calc_mck_cycles(nrd_setup, mck_hz);
|
||||
nrd_pulse = calc_mck_cycles(nrd_pulse, mck_hz);
|
||||
nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
|
||||
do {
|
||||
ret = calc_smc_vals(dev, &setup, &pulse, &cycle, &cs_pulse);
|
||||
} while (ret == -ER_SMC_RECALC);
|
||||
|
||||
active = nrd_setup + nrd_pulse;
|
||||
recover = read_cycle - active;
|
||||
if (ret == -ER_SMC_CALC)
|
||||
dev_err(dev, "Interface may not operate correctly\n");
|
||||
|
||||
/* Need at least two cycles recovery */
|
||||
if (recover < 2)
|
||||
read_cycle = active + 2;
|
||||
dev_dbg(dev, "SMC Setup=%u, Pulse=%u, Cycle=%u, CS Pulse=%u\n",
|
||||
setup, pulse, cycle, cs_pulse);
|
||||
to_smc_format(&setup, &pulse, &cycle, &cs_pulse);
|
||||
/* disable or enable waiting for IORDY signal */
|
||||
use_iordy = ata_pio_need_iordy(adev);
|
||||
if (use_iordy)
|
||||
info->mode |= AT91_SMC_EXNWMODE_READY;
|
||||
|
||||
/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
|
||||
ncs_read_setup = 1;
|
||||
ncs_read_pulse = read_cycle - 2;
|
||||
if (ncs_read_pulse > NCS_RD_PULSE_LIMIT) {
|
||||
ncs_read_pulse = NCS_RD_PULSE_LIMIT;
|
||||
dev_warn(dev, "ncs_read_pulse limited to maximal value %lu\n",
|
||||
ncs_read_pulse);
|
||||
if (tdf_cycles > 15) {
|
||||
tdf_cycles = 15;
|
||||
dev_warn(dev, "maximal SMC TDF Cycles value\n");
|
||||
}
|
||||
|
||||
/* Write timings same as read timings */
|
||||
write_cycle = read_cycle;
|
||||
nwe_setup = nrd_setup;
|
||||
nwe_pulse = nrd_pulse;
|
||||
ncs_write_setup = ncs_read_setup;
|
||||
ncs_write_pulse = ncs_read_pulse;
|
||||
|
||||
dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
|
||||
nrd_setup, nrd_pulse, read_cycle);
|
||||
dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
|
||||
nwe_setup, nwe_pulse, write_cycle);
|
||||
dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
|
||||
ncs_read_setup, ncs_read_pulse);
|
||||
dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
|
||||
ncs_write_setup, ncs_write_pulse);
|
||||
dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
|
||||
info->mode |= AT91_SMC_TDF_(tdf_cycles);
|
||||
|
||||
/* write SMC Setup Register */
|
||||
at91_sys_write(AT91_SMC_SETUP(info->cs),
|
||||
AT91_SMC_NWESETUP_(nwe_setup) |
|
||||
AT91_SMC_NRDSETUP_(nrd_setup) |
|
||||
AT91_SMC_NCS_WRSETUP_(ncs_write_setup) |
|
||||
AT91_SMC_NCS_RDSETUP_(ncs_read_setup));
|
||||
|
||||
AT91_SMC_NWESETUP_(setup) |
|
||||
AT91_SMC_NRDSETUP_(setup) |
|
||||
AT91_SMC_NCS_WRSETUP_(cs_setup) |
|
||||
AT91_SMC_NCS_RDSETUP_(cs_setup));
|
||||
/* write SMC Pulse Register */
|
||||
at91_sys_write(AT91_SMC_PULSE(info->cs),
|
||||
AT91_SMC_NWEPULSE_(nwe_pulse) |
|
||||
AT91_SMC_NRDPULSE_(nrd_pulse) |
|
||||
AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) |
|
||||
AT91_SMC_NCS_RDPULSE_(ncs_read_pulse));
|
||||
|
||||
AT91_SMC_NWEPULSE_(pulse) |
|
||||
AT91_SMC_NRDPULSE_(pulse) |
|
||||
AT91_SMC_NCS_WRPULSE_(cs_pulse) |
|
||||
AT91_SMC_NCS_RDPULSE_(cs_pulse));
|
||||
/* write SMC Cycle Register */
|
||||
at91_sys_write(AT91_SMC_CYCLE(info->cs),
|
||||
AT91_SMC_NWECYCLE_(write_cycle) |
|
||||
AT91_SMC_NRDCYCLE_(read_cycle));
|
||||
|
||||
return;
|
||||
AT91_SMC_NWECYCLE_(cycle) |
|
||||
AT91_SMC_NRDCYCLE_(cycle));
|
||||
/* write SMC Mode Register*/
|
||||
at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
|
||||
}
|
||||
|
||||
static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
||||
|
|
@ -172,15 +277,9 @@ static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|||
if (ret) {
|
||||
dev_warn(ap->dev, "Failed to compute ATA timing %d, "
|
||||
"set PIO_0 timing\n", ret);
|
||||
set_smc_timing(ap->dev, info, &initial_timing);
|
||||
} else {
|
||||
set_smc_timing(ap->dev, info, &timing);
|
||||
timing = *ata_timing_find_mode(XFER_PIO_0);
|
||||
}
|
||||
|
||||
/* Setup SMC mode */
|
||||
set_smc_mode(info);
|
||||
|
||||
return;
|
||||
set_smc_timing(ap->dev, adev, info, &timing);
|
||||
}
|
||||
|
||||
static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
|
||||
|
|
@ -346,7 +445,7 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
|
|||
static struct platform_driver pata_at91_driver = {
|
||||
.probe = pata_at91_probe,
|
||||
.remove = __devexit_p(pata_at91_remove),
|
||||
.driver = {
|
||||
.driver = {
|
||||
.name = DRV_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
|
|
|
|||
Loading…
Reference in a new issue