net/ucc_geth: Add SGMII support for UEC GETH driver

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Haiying Wang 2009-06-02 04:04:15 +00:00 committed by David S. Miller
parent fbcc0e2ce5
commit 047584ce94
3 changed files with 107 additions and 2 deletions

View file

@ -668,6 +668,8 @@ struct ucc_slow_pram {
#define UCC_GETH_UPSMR_RMM 0x00001000
#define UCC_GETH_UPSMR_CAM 0x00000400
#define UCC_GETH_UPSMR_BRO 0x00000200
#define UCC_GETH_UPSMR_SMM 0x00000080
#define UCC_GETH_UPSMR_SGMM 0x00000020
/* UCC Transmit On Demand Register (UTODR) */
#define UCC_SLOW_TOD 0x8000

View file

@ -1,5 +1,5 @@
/*
* Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
@ -65,6 +65,8 @@
static DEFINE_SPINLOCK(ugeth_lock);
static void uec_configure_serdes(struct net_device *dev);
static struct {
u32 msg_enable;
} debug = { -1 };
@ -1410,6 +1412,9 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
(ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
upsmr |= UCC_GETH_UPSMR_TBIM;
}
if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII))
upsmr |= UCC_GETH_UPSMR_SGMM;
out_be32(&uf_regs->upsmr, upsmr);
/* Disable autonegotiation in tbi mode, because by default it
@ -1554,6 +1559,9 @@ static int init_phy(struct net_device *dev)
return -ENODEV;
}
if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
uec_configure_serdes(dev);
phydev->supported &= (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
@ -1569,7 +1577,41 @@ static int init_phy(struct net_device *dev)
return 0;
}
/* Initialize TBI PHY interface for communicating with the
* SERDES lynx PHY on the chip. We communicate with this PHY
* through the MDIO bus on each controller, treating it as a
* "normal" PHY at the address found in the UTBIPA register. We assume
* that the UTBIPA register is valid. Either the MDIO bus code will set
* it to a value that doesn't conflict with other PHYs on the bus, or the
* value doesn't matter, as there are no other PHYs on the bus.
*/
static void uec_configure_serdes(struct net_device *dev)
{
struct ucc_geth_private *ugeth = netdev_priv(dev);
if (!ugeth->tbiphy) {
printk(KERN_WARNING "SGMII mode requires that the device "
"tree specify a tbi-handle\n");
return;
}
/*
* If the link is already up, we must already be ok, and don't need to
* configure and reset the TBI<->SerDes link. Maybe U-Boot configured
* everything for us? Resetting it takes the link down and requires
* several seconds for it to come back.
*/
if (phy_read(ugeth->tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
return;
/* Single clk mode, mii mode off(for serdes communication) */
phy_write(ugeth->tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
phy_write(ugeth->tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
phy_write(ugeth->tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
}
static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
{
@ -3523,6 +3565,8 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type)
return PHY_INTERFACE_MODE_RGMII_RXID;
if (strcasecmp(phy_connection_type, "rtbi") == 0)
return PHY_INTERFACE_MODE_RTBI;
if (strcasecmp(phy_connection_type, "sgmii") == 0)
return PHY_INTERFACE_MODE_SGMII;
return PHY_INTERFACE_MODE_MII;
}
@ -3567,6 +3611,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI,
PHY_INTERFACE_MODE_SGMII,
};
ugeth_vdbg("%s: IN", __func__);
@ -3682,6 +3727,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_TBI:
case PHY_INTERFACE_MODE_RTBI:
case PHY_INTERFACE_MODE_SGMII:
max_speed = SPEED_1000;
break;
default:
@ -3756,6 +3802,37 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ugeth->ndev = dev;
ugeth->node = np;
/* Find the TBI PHY. If it's not there, we don't support SGMII */
ph = of_get_property(np, "tbi-handle", NULL);
if (ph) {
struct device_node *tbi = of_find_node_by_phandle(*ph);
struct of_device *ofdev;
struct mii_bus *bus;
const unsigned int *id;
if (!tbi)
return 0;
mdio = of_get_parent(tbi);
if (!mdio)
return 0;
ofdev = of_find_device_by_node(mdio);
of_node_put(mdio);
id = of_get_property(tbi, "reg", NULL);
if (!id)
return 0;
of_node_put(tbi);
bus = dev_get_drvdata(&ofdev->dev);
if (!bus)
return 0;
ugeth->tbiphy = bus->phy_map[*id];
}
return 0;
}

View file

@ -1,5 +1,5 @@
/*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
* Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
*
@ -193,6 +193,31 @@ struct ucc_geth {
#define ENET_TBI_MII_JD 0x10 /* Jitter diagnostics */
#define ENET_TBI_MII_TBICON 0x11 /* TBI control */
/* TBI MDIO register bit fields*/
#define TBISR_LSTATUS 0x0004
#define TBICON_CLK_SELECT 0x0020
#define TBIANA_ASYMMETRIC_PAUSE 0x0100
#define TBIANA_SYMMETRIC_PAUSE 0x0080
#define TBIANA_HALF_DUPLEX 0x0040
#define TBIANA_FULL_DUPLEX 0x0020
#define TBICR_PHY_RESET 0x8000
#define TBICR_ANEG_ENABLE 0x1000
#define TBICR_RESTART_ANEG 0x0200
#define TBICR_FULL_DUPLEX 0x0100
#define TBICR_SPEED1_SET 0x0040
#define TBIANA_SETTINGS ( \
TBIANA_ASYMMETRIC_PAUSE \
| TBIANA_SYMMETRIC_PAUSE \
| TBIANA_FULL_DUPLEX \
)
#define TBICR_SETTINGS ( \
TBICR_PHY_RESET \
| TBICR_ANEG_ENABLE \
| TBICR_FULL_DUPLEX \
| TBICR_SPEED1_SET \
)
/* UCC GETH MACCFG1 (MAC Configuration 1 Register) */
#define MACCFG1_FLOW_RX 0x00000020 /* Flow Control
Rx */
@ -1188,6 +1213,7 @@ struct ucc_geth_private {
struct ugeth_mii_info *mii_info;
struct phy_device *phydev;
struct phy_device *tbiphy;
phy_interface_t phy_interface;
int max_speed;
uint32_t msg_enable;