[SERIAL] Support Au1x00 8250 UARTs using the generic 8250 driver.

The offsets of the registers are in a different place, and
some parts cannot handle a full set of modem control signals.

Signed-off-by: Pantelis Antoniou <pantelis@embeddedalley.ocm>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Pantelis Antoniou 2005-11-06 09:07:03 +00:00 committed by Russell King
parent f912696ab3
commit 21c614a789
8 changed files with 185 additions and 3 deletions

View file

@ -251,9 +251,53 @@ static const struct serial8250_config uart_config[] = {
},
};
#ifdef CONFIG_SERIAL_8250_AU1X00
/* Au1x00 UART hardware has a weird register layout */
static const u8 au_io_in_map[] = {
[UART_RX] = 0,
[UART_IER] = 2,
[UART_IIR] = 3,
[UART_LCR] = 5,
[UART_MCR] = 6,
[UART_LSR] = 7,
[UART_MSR] = 8,
};
static const u8 au_io_out_map[] = {
[UART_TX] = 1,
[UART_IER] = 2,
[UART_FCR] = 4,
[UART_LCR] = 5,
[UART_MCR] = 6,
};
/* sane hardware needs no mapping */
static inline int map_8250_in_reg(struct uart_8250_port *up, int offset)
{
if (up->port.iotype != UPIO_AU)
return offset;
return au_io_in_map[offset];
}
static inline int map_8250_out_reg(struct uart_8250_port *up, int offset)
{
if (up->port.iotype != UPIO_AU)
return offset;
return au_io_out_map[offset];
}
#else
/* sane hardware needs no mapping */
#define map_8250_in_reg(up, offset) (offset)
#define map_8250_out_reg(up, offset) (offset)
#endif
static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
{
offset <<= up->port.regshift;
offset = map_8250_in_reg(up, offset) << up->port.regshift;
switch (up->port.iotype) {
case UPIO_HUB6:
@ -266,6 +310,11 @@ static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
case UPIO_MEM32:
return readl(up->port.membase + offset);
#ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU:
return __raw_readl(up->port.membase + offset);
#endif
default:
return inb(up->port.iobase + offset);
}
@ -274,7 +323,7 @@ static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
static _INLINE_ void
serial_out(struct uart_8250_port *up, int offset, int value)
{
offset <<= up->port.regshift;
offset = map_8250_out_reg(up, offset) << up->port.regshift;
switch (up->port.iotype) {
case UPIO_HUB6:
@ -290,6 +339,12 @@ serial_out(struct uart_8250_port *up, int offset, int value)
writel(value, up->port.membase + offset);
break;
#ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU:
__raw_writel(value, up->port.membase + offset);
break;
#endif
default:
outb(value, up->port.iobase + offset);
}
@ -910,6 +965,13 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
}
}
#endif
#ifdef CONFIG_SERIAL_8250_AU1X00
/* if access method is AU, it is a 16550 with a quirk */
if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
up->bugs |= UART_BUG_NOMSR;
#endif
serial_outp(up, UART_LCR, save_lcr);
if (up->capabilities != uart_config[up->port.type].flags) {
@ -1057,6 +1119,10 @@ static void serial8250_enable_ms(struct uart_port *port)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
/* no MSR capabilities */
if (up->bugs & UART_BUG_NOMSR)
return;
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
}
@ -1774,7 +1840,8 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
* CTS flow control flag and modem status interrupts
*/
up->ier &= ~UART_IER_MSI;
if (UART_ENABLE_MS(&up->port, termios->c_cflag))
if (!(up->bugs & UART_BUG_NOMSR) &&
UART_ENABLE_MS(&up->port, termios->c_cflag))
up->ier |= UART_IER_MSI;
if (up->capabilities & UART_CAP_UUE)
up->ier |= UART_IER_UUE | UART_IER_RTOIE;

View file

@ -49,6 +49,7 @@ struct serial8250_config {
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
#define _INLINE_ inline

View file

@ -0,0 +1,102 @@
/*
* Serial Device Initialisation for Au1x00
*
* (C) Copyright Embedded Alley Solutions, Inc 2005
* Author: Pantelis Antoniou <pantelis@embeddedalley.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/serial_core.h>
#include <linux/signal.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/serial_8250.h>
#include <asm/mach-au1x00/au1000.h>
#include "8250.h"
#define PORT(_base, _irq) \
{ \
.iobase = _base, \
.membase = (void __iomem *)_base,\
.mapbase = _base, \
.irq = _irq, \
.uartclk = 0, /* filled */ \
.regshift = 2, \
.iotype = UPIO_AU, \
.flags = UPF_SKIP_TEST | \
UPF_IOREMAP, \
}
static struct plat_serial8250_port au1x00_data[] = {
#if defined(CONFIG_SOC_AU1000)
PORT(UART0_ADDR, AU1000_UART0_INT),
PORT(UART1_ADDR, AU1000_UART1_INT),
PORT(UART2_ADDR, AU1000_UART2_INT),
PORT(UART3_ADDR, AU1000_UART3_INT),
#elif defined(CONFIG_SOC_AU1500)
PORT(UART0_ADDR, AU1500_UART0_INT),
PORT(UART3_ADDR, AU1500_UART3_INT),
#elif defined(CONFIG_SOC_AU1100)
PORT(UART0_ADDR, AU1100_UART0_INT),
PORT(UART1_ADDR, AU1100_UART1_INT),
PORT(UART2_ADDR, AU1100_UART2_INT),
PORT(UART3_ADDR, AU1100_UART3_INT),
#elif defined(CONFIG_SOC_AU1550)
PORT(UART0_ADDR, AU1550_UART0_INT),
PORT(UART1_ADDR, AU1550_UART1_INT),
PORT(UART2_ADDR, AU1550_UART2_INT),
PORT(UART3_ADDR, AU1550_UART3_INT),
#elif defined(CONFIG_SOC_AU1200)
PORT(UART0_ADDR, AU1200_UART0_INT),
PORT(UART1_ADDR, AU1200_UART1_INT),
#endif
{ },
};
static struct platform_device au1x00_device = {
.name = "serial8250",
.id = PLAT8250_DEV_AU1X00,
.dev = {
.platform_data = au1x00_data,
},
};
static int __init au1x00_init(void)
{
int i;
unsigned int uartclk;
/* get uart clock */
uartclk = get_au1x00_uart_baud_base() * 16;
/* fill up uartclk */
for (i = 0; au1x00_data[i].flags ; i++)
au1x00_data[i].uartclk = uartclk;
return platform_device_register(&au1x00_device);
}
/* XXX: Yes, I know this doesn't yet work. */
static void __exit au1x00_exit(void)
{
platform_device_unregister(&au1x00_device);
}
module_init(au1x00_init);
module_exit(au1x00_exit);
MODULE_AUTHOR("Pantelis Antoniou <pantelis@embeddedalley.com>");
MODULE_DESCRIPTION("8250 serial probe module for Au1x000 cards");
MODULE_LICENSE("GPL");

View file

@ -207,6 +207,14 @@ config SERIAL_8250_ACORN
system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
config SERIAL_8250_AU1X00
bool "AU1X00 serial port support"
depends on SERIAL_8250 != n && SOC_AU1X00
help
If you have an Au1x00 board and want to use the serial port, say Y
to this option. The driver can handle 1 or 2 serial ports.
If unsure, say N.
comment "Non-8250 serial port support"
config SERIAL_AMBA_PL010

View file

@ -22,6 +22,7 @@ obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o

View file

@ -1959,6 +1959,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
break;
case UPIO_MEM:
case UPIO_MEM32:
case UPIO_AU:
snprintf(address, sizeof(address),
"MMIO 0x%lx", port->mapbase);
break;

View file

@ -42,6 +42,7 @@ enum {
PLAT8250_DEV_BOCA,
PLAT8250_DEV_HUB6,
PLAT8250_DEV_MCA,
PLAT8250_DEV_AU1X00,
};
/*

View file

@ -211,6 +211,7 @@ struct uart_port {
#define UPIO_HUB6 (1)
#define UPIO_MEM (2)
#define UPIO_MEM32 (3)
#define UPIO_AU (4) /* Au1x00 type IO */
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */