Documentation: Fix multiple typo in Documentation

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Masanari Iida 2012-03-04 23:16:11 +09:00 committed by Jiri Kosina
parent 4e70daaf05
commit 40e47125e6
42 changed files with 77 additions and 77 deletions

View file

@ -7,7 +7,7 @@ Date: 09-Jul-2007
KernelVersion v2.6.22
Contact: linux-wireless@vger.kernel.org
Description: Current state of the transmitter.
This file is deprecated and sheduled to be removed in 2014,
This file is deprecated and scheduled to be removed in 2014,
because its not possible to express the 'soft and hard block'
state of the rfkill driver.
Values: A numeric value.

View file

@ -6,7 +6,7 @@ Description:
The name of the module that is in the kernel. This
module name will show up either if the module is built
directly into the kernel, or if it is loaded as a
dyanmic module.
dynamic module.
/sys/module/MODULENAME/parameters
This directory contains individual files that are each

View file

@ -945,7 +945,7 @@ and other resources, etc.
<listitem>
<para>
!BSY &amp;&amp; ERR after CDB tranfer starts but before the
!BSY &amp;&amp; ERR after CDB transfer starts but before the
last byte of CDB is transferred. ATA/ATAPI standard states
that &quot;The device shall not terminate the PACKET command
with an error before the last byte of the command packet has
@ -1050,7 +1050,7 @@ and other resources, etc.
to complete a command. Combined with the fact that MWDMA
and PIO transfer errors aren't allowed to use ICRC bit up to
ATA/ATAPI-7, it seems to imply that ABRT bit alone could
indicate tranfer errors.
indicate transfer errors.
</para>
<para>
However, ATA/ATAPI-8 draft revision 1f removes the part

View file

@ -444,7 +444,7 @@ linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR24</constant></link></para></entr
<entry><para><link
linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR32</constant></link><footnote>
<para>Presumably all V4L RGB formats are
little-endian, although some drivers might interpret them according to machine endianess. V4L2 defines little-endian, big-endian and red/blue
little-endian, although some drivers might interpret them according to machine endianness. V4L2 defines little-endian, big-endian and red/blue
swapped variants. For details see <xref linkend="pixfmt-rgb" />.</para>
</footnote></para></entry>
</row>
@ -823,7 +823,7 @@ standard); 35468950&nbsp;Hz PAL and SECAM (625-line standards)</entry>
<row>
<entry>sample_format</entry>
<entry>V4L2_PIX_FMT_GREY. The last four bytes (a
machine endianess integer) contain a frame counter.</entry>
machine endianness integer) contain a frame counter.</entry>
</row>
<row>
<entry>start[]</entry>

View file

@ -25,7 +25,7 @@ inline (either in the code emitted directly by the compiler, or part of
the implementation of a library call) when optimizing for a recent enough
processor that has the necessary native support, but only if resulting
binaries are already to be incompatible with earlier ARM processors due to
useage of similar native instructions for other things. In other words
usage of similar native instructions for other things. In other words
don't make binaries unable to run on earlier processors just for the sake
of not using these kernel helpers if your compiled code is not going to
use new instructions for other purpose.

View file

@ -94,11 +94,11 @@ Throttling/Upper Limit policy
Hierarchical Cgroups
====================
- Currently none of the IO control policy supports hierarhical groups. But
cgroup interface does allow creation of hierarhical cgroups and internally
- Currently none of the IO control policy supports hierarchical groups. But
cgroup interface does allow creation of hierarchical cgroups and internally
IO policies treat them as flat hierarchy.
So this patch will allow creation of cgroup hierarhcy but at the backend
So this patch will allow creation of cgroup hierarchcy but at the backend
everything will be treated as flat. So if somebody created a hierarchy like
as follows.
@ -266,7 +266,7 @@ Proportional weight policy files
- blkio.idle_time
- Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
This is the amount of time spent by the IO scheduler idling for a
given cgroup in anticipation of a better request than the exising ones
given cgroup in anticipation of a better request than the existing ones
from other queues/cgroups. This is in nanoseconds. If this is read
when the cgroup is in an idling state, the stat will only report the
idle_time accumulated till the last idle period and will not include
@ -283,34 +283,34 @@ Throttling/Upper limit policy files
-----------------------------------
- blkio.throttle.read_bps_device
- Specifies upper limit on READ rate from the device. IO rate is
specified in bytes per second. Rules are per deivce. Following is
specified in bytes per second. Rules are per device. Following is
the format.
echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
- blkio.throttle.write_bps_device
- Specifies upper limit on WRITE rate to the device. IO rate is
specified in bytes per second. Rules are per deivce. Following is
specified in bytes per second. Rules are per device. Following is
the format.
echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
- blkio.throttle.read_iops_device
- Specifies upper limit on READ rate from the device. IO rate is
specified in IO per second. Rules are per deivce. Following is
specified in IO per second. Rules are per device. Following is
the format.
echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
- blkio.throttle.write_iops_device
- Specifies upper limit on WRITE rate to the device. IO rate is
specified in io per second. Rules are per deivce. Following is
specified in io per second. Rules are per device. Following is
the format.
echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
Note: If both BW and IOPS rules are specified for a device, then IO is
subjectd to both the constraints.
subjected to both the constraints.
- blkio.throttle.io_serviced
- Number of IOs (bio) completed to/from the disk by the group (as

View file

@ -28,7 +28,7 @@ The target is named "raid" and it accepts the following parameters:
raid6_nc RAID6 N continue
- rotating parity N (right-to-left) with data continuation
Refererence: Chapter 4 of
Reference: Chapter 4 of
http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf
<#raid_params>: The number of parameters that follow.

View file

@ -3,7 +3,7 @@ Introduction
The more-sophisticated device-mapper targets require complex metadata
that is managed in kernel. In late 2010 we were seeing that various
different targets were rolling their own data strutures, for example:
different targets were rolling their own data structures, for example:
- Mikulas Patocka's multisnap implementation
- Heinz Mauelshagen's thin provisioning target

View file

@ -5,7 +5,7 @@ IPs present in the SoC.
On top of that an omap_device is created to extend the platform_device
capabilities and to allow binding with one or several hwmods.
The hwmods will contain all the information to build the device:
adresse range, irq lines, dma lines, interconnect, PRCM register,
address range, irq lines, dma lines, interconnect, PRCM register,
clock domain, input clocks.
For the moment just point to the existing hwmod, the next step will be
to move data from hwmod to device-tree representation.

View file

@ -1,3 +1,3 @@
prima2 "cb" evalutation board
prima2 "cb" evaluation board
Required root node properties:
- compatible = "sirf,prima2-cb", "sirf,prima2";

View file

@ -169,7 +169,7 @@ it with special cases.
b) Entry with a flattened device-tree block. Firmware loads the
physical address of the flattened device tree block (dtb) into r2,
r1 is not used, but it is considered good practise to use a valid
r1 is not used, but it is considered good practice to use a valid
machine number as described in Documentation/arm/Booting.
r0 : 0

View file

@ -63,7 +63,7 @@ The slave DMA usage consists of following steps:
struct dma_slave_config *config)
Please see the dma_slave_config structure definition in dmaengine.h
for a detailed explaination of the struct members. Please note
for a detailed explanation of the struct members. Please note
that the 'direction' member will be going away as it duplicates the
direction given in the prepare call.

View file

@ -177,8 +177,8 @@ sgram - tells to driver that you have Gxx0 with SGRAM memory. It has no
effect without `init'.
sdram - tells to driver that you have Gxx0 with SDRAM memory.
It is a default.
inv24 - change timings parameters for 24bpp modes on Millenium and
Millenium II. Specify this if you see strange color shadows around
inv24 - change timings parameters for 24bpp modes on Millennium and
Millennium II. Specify this if you see strange color shadows around
characters.
noinv24 - use standard timings. It is the default.
inverse - invert colors on screen (for LCD displays)
@ -204,9 +204,9 @@ grayscale - enable grayscale summing. It works in PSEUDOCOLOR modes (text,
can paint colors.
nograyscale - disable grayscale summing. It is default.
cross4MB - enables that pixel line can cross 4MB boundary. It is default for
non-Millenium.
non-Millennium.
nocross4MB - pixel line must not cross 4MB boundary. It is default for
Millenium I or II, because of these devices have hardware
Millennium I or II, because of these devices have hardware
limitations which do not allow this. But this option is
incompatible with some (if not all yet released) versions of
XF86_FBDev.

View file

@ -308,7 +308,7 @@ min_batch_time=usec This parameter sets the commit time (as
fast disks, at the cost of increasing latency.
journal_ioprio=prio The I/O priority (from 0 to 7, where 0 is the
highest priorty) which should be used for I/O
highest priority) which should be used for I/O
operations submitted by kjournald2 during a
commit operation. This defaults to 3, which is
a slightly higher priority than the default I/O
@ -343,7 +343,7 @@ noinit_itable Do not initialize any uninitialized inode table
init_itable=n The lazy itable init code will wait n times the
number of milliseconds it took to zero out the
previous block group's inode table. This
minimizes the impact on the systme performance
minimizes the impact on the system performance
while file system's inode table is being initialized.
discard Controls whether ext4 should issue discard/TRIM

View file

@ -62,7 +62,7 @@ be fixed.
The REMOVE uevent is generated at the end of an unsuccessful mount
or at the end of a umount of the filesystem. All REMOVE uevents will
have been preceded by at least an ADD uevent for the same fileystem,
have been preceded by at least an ADD uevent for the same filesystem,
and unlike the other uevents is generated automatically by the kernel's
kobject subsystem.

View file

@ -20,7 +20,7 @@ Commands can be embedded into transaction command (which in turn has own command
so one can extend protocol as needed without breaking backward compatibility as long
as old commands are supported. All string lengths include tail 0 byte.
All commands are transferred over the network in big-endian. CPU endianess is used at the end peers.
All commands are transferred over the network in big-endian. CPU endianness is used at the end peers.
@cmd - command number, which specifies command to be processed. Following
commands are used currently:

View file

@ -993,7 +993,7 @@ struct dentry_operations {
If the 'rcu_walk' parameter is true, then the caller is doing a
pathwalk in RCU-walk mode. Sleeping is not permitted in this mode,
and the caller can be asked to leave it and call again by returing
and the caller can be asked to leave it and call again by returning
-ECHILD.
This function is only used if DCACHE_MANAGE_TRANSIT is set on the

View file

@ -53,7 +53,7 @@ attributes are write-only, all other attributes are read-only.
in1_label "vin1" or "vout1" depending on chip variant and
configuration.
in1_input Measured voltage.
in1_min Minumum Voltage.
in1_min Minimum Voltage.
in1_max Maximum voltage.
in1_min_alarm Voltage low alarm.
in1_max_alarm Voltage high alarm.

View file

@ -42,9 +42,9 @@ attributes are read-only.
in[1-4]_label "vout[1-4]"
in[1-4]_input Measured voltage. From READ_VOUT register.
in[1-4]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[1-4]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.

View file

@ -48,9 +48,9 @@ attributes are read-only.
in[1-6]_label "vout[1-6]".
in[1-6]_input Measured voltage. From READ_VOUT register.
in[1-6]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-6]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[1-6]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-6]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.

View file

@ -42,9 +42,9 @@ attributes are read-only.
in1_label "vout1"
in1_input Measured voltage. From READ_VOUT register.
in1_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
in1_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in1_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
in1_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.

View file

@ -70,9 +70,9 @@ attributes are read-only.
in[1-12]_label "vout[1-12]".
in[1-12]_input Measured voltage. From READ_VOUT register.
in[1-12]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-12]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[1-12]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-12]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
@ -82,7 +82,7 @@ in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
curr[1-12]_label "iout[1-12]".
curr[1-12]_input Measured current. From READ_IOUT register.
curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr[1-12]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT
curr[1-12]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT
register.
curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status.

View file

@ -54,9 +54,9 @@ attributes are read-only.
in1_label "vin".
in1_input Measured voltage. From READ_VIN register.
in1_min Minumum Voltage. From VIN_UV_WARN_LIMIT register.
in1_min Minimum Voltage. From VIN_UV_WARN_LIMIT register.
in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register.
in1_lcrit Critical minumum Voltage. VIN_UV_FAULT_LIMIT register.
in1_lcrit Critical minimum Voltage. VIN_UV_FAULT_LIMIT register.
in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT register.
in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status.
in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status.
@ -65,9 +65,9 @@ in1_crit_alarm Voltage critical high alarm. From VIN_OV_FAULT status.
in[2-5]_label "vout[1-4]".
in[2-5]_input Measured voltage. From READ_VOUT register.
in[2-5]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
in[2-5]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[2-5]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
in[2-5]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
@ -80,7 +80,7 @@ curr1_input Measured current. From READ_IIN register.
curr[2-5]_label "iout[1-4]".
curr[2-5]_input Measured current. From READ_IOUT register.
curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr[2-5]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT
curr[2-5]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT
register.
curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status.

View file

@ -108,7 +108,7 @@ in1_label "vin"
in1_input Measured input voltage.
in1_min Minimum input voltage.
in1_max Maximum input voltage.
in1_lcrit Critical minumum input voltage.
in1_lcrit Critical minimum input voltage.
in1_crit Critical maximum input voltage.
in1_min_alarm Input voltage low alarm.
in1_max_alarm Input voltage high alarm.
@ -117,7 +117,7 @@ in1_crit_alarm Input voltage critical high alarm.
in2_label "vout1"
in2_input Measured output voltage.
in2_lcrit Critical minumum output Voltage.
in2_lcrit Critical minimum output Voltage.
in2_crit Critical maximum output voltage.
in2_lcrit_alarm Critical output voltage critical low alarm.
in2_crit_alarm Critical output voltage critical high alarm.

View file

@ -138,7 +138,7 @@ VI. Setting Parameters
The return value is the size in bytes of the data written into
ops->resbuf if no errors occur. If an error occurs, -1 is returned
and errno is set appropriatly:
and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@ -222,7 +222,7 @@ VIII. Downloading Software
RETURNS
This function returns 0 no errors occur. If an error occurs, -1
is returned and errno is set appropriatly:
is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@ -264,7 +264,7 @@ IX. Uploading Software
RETURNS
This function returns 0 if no errors occur. If an error occurs, -1
is returned and errno is set appropriatly:
is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@ -301,7 +301,7 @@ X. Removing Software
RETURNS
This function returns 0 if no errors occur. If an error occurs, -1
is returned and errno is set appropriatly:
is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@ -325,7 +325,7 @@ X. Validating Configuration
RETURNS
This function returns 0 if no erro occur. If an error occurs, -1 is
returned and errno is set appropriatly:
returned and errno is set appropriately:
ETIMEDOUT Timeout waiting for reply message
ENXIO Invalid IOP number
@ -360,7 +360,7 @@ XI. Configuration Dialog
RETURNS
This function returns 0 if no error occur. If an error occurs, -1
is returned and errno is set appropriatly:
is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number

View file

@ -175,7 +175,7 @@
* since the .pdf version doesn't seem to work...
* -- Updated the TODO list to something more current.
*
* 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess,
* 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect machine endianness,
* patch thanks to "Eddie C. Dost" <ecd@skynet.be>
*
* 4.50 Oct 19, 1998 -- New maintainers!

View file

@ -131,8 +131,8 @@ number of contacts (f1 and f0 in the table below).
byte 5: 0 1 ? ? ? ? f1 f0
This packet only appears after a position packet with the mt bit set, and
ususally only appears when there are two or more contacts (although
ocassionally it's seen with only a single contact).
usually only appears when there are two or more contacts (although
occassionally it's seen with only a single contact).
The final v3 packet type is the trackstick packet.

View file

@ -330,7 +330,7 @@ the USB documentation for how to setup an USB mouse.
The TM DirectConnect (BSP) protocol is supported by the tmdc.c
module. This includes, but is not limited to:
* ThrustMaster Millenium 3D Inceptor
* ThrustMaster Millennium 3D Interceptor
* ThrustMaster 3D Rage Pad
* ThrustMaster Fusion Digital Game Pad

View file

@ -596,7 +596,7 @@ HDIO_DRIVE_TASKFILE execute raw taskfile
if CHS/LBA28
The association between in_flags.all and each enable
bitfield flips depending on endianess; fortunately, TASKFILE
bitfield flips depending on endianness; fortunately, TASKFILE
only uses inflags.b.data bit and ignores all other bits.
The end result is that, on any endian machines, it has no
effect other than modifying in_flags on completion.
@ -720,7 +720,7 @@ HDIO_DRIVE_TASKFILE execute raw taskfile
[6] Do not access {in|out}_flags->all except for resetting
all the bits. Always access individual bit fields. ->all
value will flip depending on endianess. For the same
value will flip depending on endianness. For the same
reason, do not use IDE_{TASKFILE|HOB}_STD_{OUT|IN}_FLAGS
constants defined in hdreg.h.

View file

@ -117,7 +117,7 @@ applicable everywhere (see syntax).
This attribute is only applicable to menu blocks, if the condition is
false, the menu block is not displayed to the user (the symbols
contained there can still be selected by other symbols, though). It is
similar to a conditional "prompt" attribude for individual menu
similar to a conditional "prompt" attribute for individual menu
entries. Default value of "visible" is true.
- numerical ranges: "range" <symbol> <symbol> ["if" <expr>]

View file

@ -44,7 +44,7 @@ the 'software updates' pages. The firmware binaries are part of
the various ForeThought software distributions.
Notice that different versions of the PCA-200E firmware exist, depending
on the endianess of the host architecture. The driver is shipped with
on the endianness of the host architecture. The driver is shipped with
both little and big endian PCA firmware images.
Name and location of the new firmware images can be set at kernel

View file

@ -1718,7 +1718,7 @@ Changes from 20040319 to 20040326
* lpfc_els_timeout_handler() now uses system timer.
* Further cleanup of #ifdef powerpc
* lpfc_scsi_timeout_handler() now uses system timer.
* Replace common driver's own defines for endianess w/ Linux's
* Replace common driver's own defines for endianness w/ Linux's
__BIG_ENDIAN etc.
* Added #ifdef IPFC for all IPFC specific code.
* lpfc_disc_retry_rptlun() now uses system timer.

View file

@ -510,7 +510,7 @@ i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added.
3 Older Version : 00.00.02.02
i. Register 16 byte CDB capability with scsi midlayer
"Ths patch properly registers the 16 byte command length capability of the
"This patch properly registers the 16 byte command length capability of the
megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas
hardware supports 16 byte CDB's."

View file

@ -102,7 +102,7 @@ So take at least the following measures:
ftp://student.physik.uni-dortmund.de/pub/linux/kernel/bootdisk.gz
One more warning: I used to overclock my PCI bus to 41.67 MHz. My Tekram
DC390F (Sym53c875) accepted this as well as my Millenium. But the Am53C974
DC390F (Sym53c875) accepted this as well as my Millennium. But the Am53C974
produced errors and started to corrupt my disks. So don't do that! A 37.50
MHz PCI bus works for me, though, but I don't recommend using higher clocks
than the 33.33 MHz being in the PCI spec.

View file

@ -536,6 +536,6 @@ writing a single character to the /smack/logging file :
3 : log denied & accepted
Events are logged as 'key=value' pairs, for each event you at least will get
the subjet, the object, the rights requested, the action, the kernel function
the subject, the object, the rights requested, the action, the kernel function
that triggered the event, plus other pairs depending on the type of event
audited.

View file

@ -1,7 +1,7 @@
Trusted and Encrypted Keys
Trusted and Encrypted Keys are two new key types added to the existing kernel
key ring service. Both of these new types are variable length symmetic keys,
key ring service. Both of these new types are variable length symmetric keys,
and in both cases all keys are created in the kernel, and user space sees,
stores, and loads only encrypted blobs. Trusted Keys require the availability
of a Trusted Platform Module (TPM) chip for greater security, while Encrypted

View file

@ -668,7 +668,7 @@ The keyctl syscall functions are:
If the kernel calls back to userspace to complete the instantiation of a
key, userspace should use this call mark the key as negative before the
invoked process returns if it is unable to fulfil the request.
invoked process returns if it is unable to fulfill the request.
The process must have write access on the key to be able to instantiate
it, and the key must be uninstantiated.

View file

@ -1588,7 +1588,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module supports autoprobe a chip.
Note: the driver may have problems regarding endianess.
Note: the driver may have problems regarding endianness.
The power-management is supported.

View file

@ -116,7 +116,7 @@ Description:
A UVC control can be mapped to several V4L2 controls. For instance,
a UVC pan/tilt control could be mapped to separate pan and tilt V4L2
controls. The UVC control is divided into non overlapping fields using
the 'size' and 'offset' fields and are then independantly mapped to
the 'size' and 'offset' fields and are then independently mapped to
V4L2 control.
For signed integer V4L2 controls the data_type field should be set to

View file

@ -347,7 +347,7 @@ To instantiate a large spte, four constraints must be satisfied:
- the spte must point to a large host page
- the guest pte must be a large pte of at least equivalent size (if tdp is
enabled, there is no guest pte and this condition is satisified)
enabled, there is no guest pte and this condition is satisfied)
- if the spte will be writeable, the large page frame may not overlap any
write-protected pages
- the guest page must be wholly contained by a single memory slot
@ -356,7 +356,7 @@ To check the last two conditions, the mmu maintains a ->write_count set of
arrays for each memory slot and large page size. Every write protected page
causes its write_count to be incremented, thus preventing instantiation of
a large spte. The frames at the end of an unaligned memory slot have
artificically inflated ->write_counts so they can never be instantiated.
artificially inflated ->write_counts so they can never be instantiated.
Further reading
===============

View file

@ -1403,7 +1403,7 @@ segmentation, if both guests are amenable.
Packets are transmitted by placing them in the transmitq, and
buffers for incoming packets are placed in the receiveq. In each
case, the packet itself is preceeded by a header:
case, the packet itself is preceded by a header:
struct virtio_net_hdr {
@ -1642,7 +1642,7 @@ struct virtio_net_ctrl_mac {
The device can filter incoming packets by any number of
destination MAC addresses.[footnote:
Since there are no guarentees, it can use a hash filter
Since there are no guarantees, it can use a hash filter
orsilently switch to allmulti or promiscuous mode if it is given
too many addresses.
] This table is set using the class VIRTIO_NET_CTRL_MAC and the
@ -1805,7 +1805,7 @@ the FLUSH and FLUSH_OUT types are equivalent, the device does not
distinguish between them
]). If the device has VIRTIO_BLK_F_BARRIER feature the high bit
(VIRTIO_BLK_T_BARRIER) indicates that this request acts as a
barrier and that all preceeding requests must be complete before
barrier and that all preceding requests must be complete before
this one, and all following requests must not be started until
this is complete. Note that a barrier does not flush caches in
the underlying backend device in host, and thus does not serve as
@ -2118,7 +2118,7 @@ This is historical, and independent of the guest page size
Otherwise, the guest may begin to re-use pages previously given
to the balloon before the device has acknowledged their
withdrawl. [footnote:
withdrawal. [footnote:
In this case, deflation advice is merely a courtesy
]

View file

@ -619,7 +619,7 @@ all PTEs from the page. For this purpose, the unevictable/mlock infrastructure
introduced a variant of try_to_unmap() called try_to_munlock().
try_to_munlock() calls the same functions as try_to_unmap() for anonymous and
mapped file pages with an additional argument specifing unlock versus unmap
mapped file pages with an additional argument specifying unlock versus unmap
processing. Again, these functions walk the respective reverse maps looking
for VM_LOCKED VMAs. When such a VMA is found for anonymous pages and file
pages mapped in linear VMAs, as in the try_to_unmap() case, the functions