remoteproc: remove the get_by_name/put API

Remove rproc_get_by_name() and rproc_put(), and the associated
remoteproc infrastructure that supports it (i.e. klist and friends),
because:

1. No one uses them
2. Using them is highly discouraged, and any potential user
   will be deeply scrutinized and encouraged to move.

If a user, that absolutely can't live with the direct boot/shutdown
model, does show up one day, then bringing this functionality back
is going to be trivial.

At this point though, keeping this functionality around is way too
much of a maintenance burden.

Cc: Sjur Brændeland <sjur.brandeland@stericsson.com>
Cc: Loic Pallardy <loic.pallardy@stericsson.com>
Cc: Ludovic BARRE <ludovic.barre@stericsson.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Cc: Mark Grosen <mgrosen@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
This commit is contained in:
Ohad Ben-Cohen 2012-07-02 20:20:53 +03:00
parent 0e49b72c8c
commit 40e575b1d0
3 changed files with 1 additions and 159 deletions

View File

@ -36,8 +36,7 @@ cost.
Note: to use this function you should already have a valid rproc
handle. There are several ways to achieve that cleanly (devres, pdata,
the way remoteproc_rpmsg.c does this, or, if this becomes prevalent, we
might also consider using dev_archdata for this). See also
rproc_get_by_name() below.
might also consider using dev_archdata for this).
void rproc_shutdown(struct rproc *rproc)
- Power off a remote processor (previously booted with rproc_boot()).
@ -51,30 +50,6 @@ cost.
which means that the @rproc handle stays valid even after
rproc_shutdown() returns, and users can still use it with a subsequent
rproc_boot(), if needed.
- don't call rproc_shutdown() to unroll rproc_get_by_name(), exactly
because rproc_shutdown() _does not_ decrement the refcount of @rproc.
To decrement the refcount of @rproc, use rproc_put() (but _only_ if
you acquired @rproc using rproc_get_by_name()).
struct rproc *rproc_get_by_name(const char *name)
- Find an rproc handle using the remote processor's name, and then
boot it. If it's already powered on, then just immediately return
(successfully). Returns the rproc handle on success, and NULL on failure.
This function increments the remote processor's refcount, so always
use rproc_put() to decrement it back once rproc isn't needed anymore.
Note: currently rproc_get_by_name() and rproc_put() are not used anymore
by the rpmsg bus and its drivers. We need to scrutinize the use cases
that still need them, and see if we can migrate them to use the non
name-based boot/shutdown interface.
void rproc_put(struct rproc *rproc)
- Decrement @rproc's power refcount and shut it down if it reaches zero
(essentially by just calling rproc_shutdown), and then decrement @rproc's
validity refcount too.
After this function returns, @rproc may _not_ be used anymore, and its
handle should be considered invalid.
This function should be called _iff_ the @rproc handle was grabbed by
calling rproc_get_by_name().
3. Typical usage

View File

@ -36,7 +36,6 @@
#include <linux/remoteproc.h>
#include <linux/iommu.h>
#include <linux/idr.h>
#include <linux/klist.h>
#include <linux/elf.h>
#include <linux/virtio_ids.h>
#include <linux/virtio_ring.h>
@ -44,25 +43,6 @@
#include "remoteproc_internal.h"
static void klist_rproc_get(struct klist_node *n);
static void klist_rproc_put(struct klist_node *n);
/*
* klist of the available remote processors.
*
* We need this in order to support name-based lookups (needed by the
* rproc_get_by_name()).
*
* That said, we don't use rproc_get_by_name() at this point.
* The use cases that do require its existence should be
* scrutinized, and hopefully migrated to rproc_boot() using device-based
* binding.
*
* If/when this materializes, we could drop the klist (and the by_name
* API).
*/
static DEFINE_KLIST(rprocs, klist_rproc_get, klist_rproc_put);
typedef int (*rproc_handle_resources_t)(struct rproc *rproc,
struct resource_table *table, int len);
typedef int (*rproc_handle_resource_t)(struct rproc *rproc, void *, int avail);
@ -1217,10 +1197,6 @@ EXPORT_SYMBOL(rproc_boot);
* which means that the @rproc handle stays valid even after rproc_shutdown()
* returns, and users can still use it with a subsequent rproc_boot(), if
* needed.
* - don't call rproc_shutdown() to unroll rproc_get_by_name(), exactly
* because rproc_shutdown() _does not_ decrement the refcount of @rproc.
* To decrement the refcount of @rproc, use rproc_put() (but _only_ if
* you acquired @rproc using rproc_get_by_name()).
*/
void rproc_shutdown(struct rproc *rproc)
{
@ -1261,105 +1237,6 @@ out:
}
EXPORT_SYMBOL(rproc_shutdown);
/* will be called when an rproc is added to the rprocs klist */
static void klist_rproc_get(struct klist_node *n)
{
struct rproc *rproc = container_of(n, struct rproc, node);
get_device(&rproc->dev);
}
/* will be called when an rproc is removed from the rprocs klist */
static void klist_rproc_put(struct klist_node *n)
{
struct rproc *rproc = container_of(n, struct rproc, node);
put_device(&rproc->dev);
}
static struct rproc *next_rproc(struct klist_iter *i)
{
struct klist_node *n;
n = klist_next(i);
if (!n)
return NULL;
return container_of(n, struct rproc, node);
}
/**
* rproc_get_by_name() - find a remote processor by name and boot it
* @name: name of the remote processor
*
* Finds an rproc handle using the remote processor's name, and then
* boot it. If it's already powered on, then just immediately return
* (successfully).
*
* Returns the rproc handle on success, and NULL on failure.
*
* This function increments the remote processor's refcount, so always
* use rproc_put() to decrement it back once rproc isn't needed anymore.
*
* Note: currently this function (and its counterpart rproc_put()) are not
* being used. We need to scrutinize the use cases
* that still need them, and see if we can migrate them to use the non
* name-based boot/shutdown interface.
*/
struct rproc *rproc_get_by_name(const char *name)
{
struct rproc *rproc;
struct klist_iter i;
int ret;
/* find the remote processor, and upref its refcount */
klist_iter_init(&rprocs, &i);
while ((rproc = next_rproc(&i)) != NULL)
if (!strcmp(rproc->name, name)) {
get_device(&rproc->dev);
break;
}
klist_iter_exit(&i);
/* can't find this rproc ? */
if (!rproc) {
pr_err("can't find remote processor %s\n", name);
return NULL;
}
ret = rproc_boot(rproc);
if (ret < 0) {
put_device(&rproc->dev);
return NULL;
}
return rproc;
}
EXPORT_SYMBOL(rproc_get_by_name);
/**
* rproc_put() - decrement the refcount of a remote processor, and shut it down
* @rproc: the remote processor
*
* This function tries to shutdown @rproc, and it then decrements its
* refcount.
*
* After this function returns, @rproc may _not_ be used anymore, and its
* handle should be considered invalid.
*
* This function should be called _iff_ the @rproc handle was grabbed by
* calling rproc_get_by_name().
*/
void rproc_put(struct rproc *rproc)
{
/* try to power off the remote processor */
rproc_shutdown(rproc);
/* downref rproc's refcount */
put_device(&rproc->dev);
}
EXPORT_SYMBOL(rproc_put);
/**
* rproc_register() - register a remote processor
* @rproc: the remote processor handle to register
@ -1389,9 +1266,6 @@ int rproc_register(struct rproc *rproc)
if (ret < 0)
return ret;
/* expose to rproc_get_by_name users */
klist_add_tail(&rproc->node, &rprocs);
dev_info(dev, "%s is available\n", rproc->name);
dev_info(dev, "Note: remoteproc is still under development and considered experimental.\n");
@ -1417,7 +1291,6 @@ int rproc_register(struct rproc *rproc)
if (ret < 0) {
dev_err(dev, "request_firmware_nowait failed: %d\n", ret);
complete_all(&rproc->firmware_loading_complete);
klist_remove(&rproc->node);
}
return ret;
@ -1573,9 +1446,6 @@ int rproc_unregister(struct rproc *rproc)
list_for_each_entry_safe(rvdev, tmp, &rproc->rvdevs, node)
rproc_remove_virtio_dev(rvdev);
/* the rproc is downref'ed as soon as it's removed from the klist */
klist_del(&rproc->node);
device_del(&rproc->dev);
return 0;

View File

@ -449,9 +449,6 @@ struct rproc_vdev {
unsigned long gfeatures;
};
struct rproc *rproc_get_by_name(const char *name);
void rproc_put(struct rproc *rproc);
struct rproc *rproc_alloc(struct device *dev, const char *name,
const struct rproc_ops *ops,
const char *firmware, int len);