[ARM] Orion: remove code duplication in TS209 and TS409 setup files

Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
This commit is contained in:
Sylver Bruneau 2008-05-31 18:21:49 +02:00 committed by Lennert Buytenhek
parent b08d5af396
commit 530c854aa3
5 changed files with 168 additions and 239 deletions

View file

@ -4,7 +4,7 @@ obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o
obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
obj-$(CONFIG_MACH_TS209) += ts209-setup.o
obj-$(CONFIG_MACH_TS409) += ts409-setup.o
obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o
obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o
obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o
obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o

View file

@ -29,6 +29,7 @@
#include <asm/arch/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "tsx09-common.h"
#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
@ -185,95 +186,6 @@ static int __init qnap_ts209_pci_init(void)
subsys_initcall(qnap_ts209_pci_init);
/*****************************************************************************
* Ethernet
****************************************************************************/
static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
.phy_addr = 8,
};
static int __init parse_hex_nibble(char n)
{
if (n >= '0' && n <= '9')
return n - '0';
if (n >= 'A' && n <= 'F')
return n - 'A' + 10;
if (n >= 'a' && n <= 'f')
return n - 'a' + 10;
return -1;
}
static int __init parse_hex_byte(const char *b)
{
int hi;
int lo;
hi = parse_hex_nibble(b[0]);
lo = parse_hex_nibble(b[1]);
if (hi < 0 || lo < 0)
return -1;
return (hi << 4) | lo;
}
static int __init check_mac_addr(const char *addr_str)
{
u_int8_t addr[6];
int i;
for (i = 0; i < 6; i++) {
int byte;
/*
* Enforce "xx:xx:xx:xx:xx:xx\n" format.
*/
if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
return -1;
byte = parse_hex_byte(addr_str + (i * 3));
if (byte < 0)
return -1;
addr[i] = byte;
}
printk(KERN_INFO "ts209: found ethernet mac address ");
for (i = 0; i < 6; i++)
printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
memcpy(qnap_ts209_eth_data.mac_addr, addr, 6);
return 0;
}
/*
* The 'NAS Config' flash partition has an ext2 filesystem which
* contains a file that has the ethernet MAC address in plain text
* (format "xx:xx:xx:xx:xx:xx\n".)
*/
static void __init ts209_find_mac_addr(void)
{
unsigned long addr;
for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
char *nor_page;
int ret = 0;
nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024);
if (nor_page != NULL) {
ret = check_mac_addr(nor_page);
iounmap(nor_page);
}
if (ret == 0)
break;
}
}
/*****************************************************************************
* RTC S35390A on I2C bus
****************************************************************************/
@ -356,31 +268,6 @@ static struct orion5x_mpp_mode ts209_mpp_modes[] __initdata = {
{ -1 },
};
/*
* QNAP TS-[12]09 specific power off method via UART1-attached PIC
*/
#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
static void qnap_ts209_power_off(void)
{
/* 19200 baud divisor */
const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
pr_info("%s: triggering power-off...\n", __func__);
/* hijack uart1 and reset into sane state (19200,8n1) */
orion5x_write(UART1_REG(LCR), 0x83);
orion5x_write(UART1_REG(DLL), divisor & 0xff);
orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
orion5x_write(UART1_REG(LCR), 0x03);
orion5x_write(UART1_REG(IER), 0x00);
orion5x_write(UART1_REG(FCR), 0x00);
orion5x_write(UART1_REG(MCR), 0x00);
/* send the power-off command 'A' to PIC */
orion5x_write(UART1_REG(TX), 'A');
}
static void __init qnap_ts209_init(void)
{
/*
@ -402,8 +289,10 @@ static void __init qnap_ts209_init(void)
*/
orion5x_ehci0_init();
orion5x_ehci1_init();
ts209_find_mac_addr();
orion5x_eth_init(&qnap_ts209_eth_data);
qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
qnap_ts209_partitions[5].offset,
qnap_ts209_partitions[5].size);
orion5x_eth_init(&qnap_tsx09_eth_data);
orion5x_i2c_init();
orion5x_sata_init(&qnap_ts209_sata_data);
orion5x_uart0_init();
@ -425,8 +314,8 @@ static void __init qnap_ts209_init(void)
pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
/* register ts209 specific power-off method */
pm_power_off = qnap_ts209_power_off;
/* register tsx09 specific power-off method */
pm_power_off = qnap_tsx09_power_off;
}
MACHINE_START(TS209, "QNAP TS-109/TS-209")

View file

@ -27,6 +27,7 @@
#include <asm/arch/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "tsx09-common.h"
/*****************************************************************************
* QNAP TS-409 Info
@ -151,95 +152,6 @@ static int __init qnap_ts409_pci_init(void)
subsys_initcall(qnap_ts409_pci_init);
/*****************************************************************************
* Ethernet
****************************************************************************/
static struct mv643xx_eth_platform_data qnap_ts409_eth_data = {
.phy_addr = 8,
};
static int __init parse_hex_nibble(char n)
{
if (n >= '0' && n <= '9')
return n - '0';
if (n >= 'A' && n <= 'F')
return n - 'A' + 10;
if (n >= 'a' && n <= 'f')
return n - 'a' + 10;
return -1;
}
static int __init parse_hex_byte(const char *b)
{
int hi;
int lo;
hi = parse_hex_nibble(b[0]);
lo = parse_hex_nibble(b[1]);
if (hi < 0 || lo < 0)
return -1;
return (hi << 4) | lo;
}
static int __init check_mac_addr(const char *addr_str)
{
u_int8_t addr[6];
int i;
for (i = 0; i < 6; i++) {
int byte;
/*
* Enforce "xx:xx:xx:xx:xx:xx\n" format.
*/
if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
return -1;
byte = parse_hex_byte(addr_str + (i * 3));
if (byte < 0)
return -1;
addr[i] = byte;
}
printk(KERN_INFO "ts409: found ethernet mac address ");
for (i = 0; i < 6; i++)
printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
memcpy(qnap_ts409_eth_data.mac_addr, addr, 6);
return 0;
}
/*
* The 'NAS Config' flash partition has an ext2 filesystem which
* contains a file that has the ethernet MAC address in plain text
* (format "xx:xx:xx:xx:xx:xx\n").
*/
static void __init ts409_find_mac_addr(void)
{
unsigned long addr;
for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
char *nor_page;
int ret = 0;
nor_page = ioremap(QNAP_TS409_NOR_BOOT_BASE + addr, 1024);
if (nor_page != NULL) {
ret = check_mac_addr(nor_page);
iounmap(nor_page);
}
if (ret == 0)
break;
}
}
/*****************************************************************************
* RTC S35390A on I2C bus
****************************************************************************/
@ -307,32 +219,6 @@ static struct orion5x_mpp_mode ts409_mpp_modes[] __initdata = {
{ -1 },
};
/*
* QNAP TS-409 specific power off method via UART1-attached PIC
*/
#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
static void qnap_ts409_power_off(void)
{
/* 19200 baud divisor */
const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
pr_info("%s: triggering power-off...\n", __func__);
/* hijack uart1 and reset into sane state (19200,8n1) */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
writel(0x03, UART1_REG(LCR));
writel(0x00, UART1_REG(IER));
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
/* send the power-off command 'A' to PIC */
writel('A', UART1_REG(TX));
}
static void __init qnap_ts409_init(void)
{
/*
@ -346,8 +232,10 @@ static void __init qnap_ts409_init(void)
* Configure peripherals.
*/
orion5x_ehci0_init();
ts409_find_mac_addr();
orion5x_eth_init(&qnap_ts409_eth_data);
qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
qnap_ts409_partitions[5].offset,
qnap_ts409_partitions[5].size);
orion5x_eth_init(&qnap_tsx09_eth_data);
orion5x_i2c_init();
orion5x_uart0_init();
@ -368,8 +256,8 @@ static void __init qnap_ts409_init(void)
pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
/* register ts409 specific power-off method */
pm_power_off = qnap_ts409_power_off;
/* register tsx09 specific power-off method */
pm_power_off = qnap_tsx09_power_off;
}
MACHINE_START(TS409, "QNAP TS-409")

View file

@ -0,0 +1,132 @@
/*
* QNAP TS-x09 Boards common functions
*
* Maintainers: Lennert Buytenhek <buytenh@marvell.com>
* Byron Bradley <byron.bbradley@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mv643xx_eth.h>
#include <linux/serial_reg.h>
#include "tsx09-common.h"
/*****************************************************************************
* QNAP TS-x09 specific power off method via UART1-attached PIC
****************************************************************************/
#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
void qnap_tsx09_power_off(void)
{
/* 19200 baud divisor */
const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
pr_info("%s: triggering power-off...\n", __func__);
/* hijack uart1 and reset into sane state (19200,8n1) */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
writel(0x03, UART1_REG(LCR));
writel(0x00, UART1_REG(IER));
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
/* send the power-off command 'A' to PIC */
writel('A', UART1_REG(TX));
}
/*****************************************************************************
* Ethernet
****************************************************************************/
struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
.phy_addr = 8,
};
static int __init qnap_tsx09_parse_hex_nibble(char n)
{
if (n >= '0' && n <= '9')
return n - '0';
if (n >= 'A' && n <= 'F')
return n - 'A' + 10;
if (n >= 'a' && n <= 'f')
return n - 'a' + 10;
return -1;
}
static int __init qnap_tsx09_parse_hex_byte(const char *b)
{
int hi;
int lo;
hi = qnap_tsx09_parse_hex_nibble(b[0]);
lo = qnap_tsx09_parse_hex_nibble(b[1]);
if (hi < 0 || lo < 0)
return -1;
return (hi << 4) | lo;
}
static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
{
u_int8_t addr[6];
int i;
for (i = 0; i < 6; i++) {
int byte;
/*
* Enforce "xx:xx:xx:xx:xx:xx\n" format.
*/
if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
return -1;
byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
if (byte < 0)
return -1;
addr[i] = byte;
}
printk(KERN_INFO "tsx09: found ethernet mac address ");
for (i = 0; i < 6; i++)
printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
return 0;
}
/*
* The 'NAS Config' flash partition has an ext2 filesystem which
* contains a file that has the ethernet MAC address in plain text
* (format "xx:xx:xx:xx:xx:xx\n").
*/
void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
{
unsigned long addr;
for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
char *nor_page;
int ret = 0;
nor_page = ioremap(addr, 1024);
if (nor_page != NULL) {
ret = qnap_tsx09_check_mac_addr(nor_page);
iounmap(nor_page);
}
if (ret == 0)
break;
}
}

View file

@ -0,0 +1,20 @@
#ifndef __ARCH_ORION5X_TSX09_COMMON_H
#define __ARCH_ORION5X_TSX09_COMMON_H
/*
* QNAP TS-x09 Boards power-off function
*/
extern void qnap_tsx09_power_off(void);
/*
* QNAP TS-x09 Boards function to find Ethernet MAC address in flash memory
*/
extern void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size);
/*
* QNAP TS-x09 Boards ethernet declaration
*/
extern struct mv643xx_eth_platform_data qnap_tsx09_eth_data;
#endif