kdump: make elfcorehdr_addr independent of CONFIG_PROC_VMCORE

o elfcorehdr_addr is used by not only the code under CONFIG_PROC_VMCORE
  but also by the code which is not inside CONFIG_PROC_VMCORE.  For
  example, is_kdump_kernel() is used by powerpc code to determine if
  kernel is booting after a panic then use previous kernel's TCE table.
  So even if CONFIG_PROC_VMCORE is not set in second kernel, one should be
  able to correctly determine that we are booting after a panic and setup
  calgary iommu accordingly.

o So remove the assumption that elfcorehdr_addr is under
  CONFIG_PROC_VMCORE.

o Move definition of elfcorehdr_addr to arch dependent crash files.
  (Unfortunately crash dump does not have an arch independent file
  otherwise that would have been the best place).

o kexec.c is not the right place as one can Have CRASH_DUMP enabled in
  second kernel without KEXEC being enabled.

o I don't see sh setup code parsing the command line for
  elfcorehdr_addr.  I am wondering how does vmcore interface work on sh.
  Anyway, I am atleast defining elfcoredhr_addr so that compilation is not
  broken on sh.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Vivek Goyal 2008-10-18 20:28:25 -07:00 committed by Linus Torvalds
parent 293adee601
commit 57cac4d188
9 changed files with 46 additions and 11 deletions

View file

@ -8,10 +8,14 @@
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/crash_dump.h>
#include <asm/page.h>
#include <asm/uaccess.h>
/* Stores the physical address of elf header of crash image. */
unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied

View file

@ -478,7 +478,12 @@ static __init int setup_nomca(char *s)
}
early_param("nomca", setup_nomca);
#ifdef CONFIG_PROC_VMCORE
/*
* Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
* is_kdump_kernel() to determine if we are booting after a panic. Hence
* ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
*/
#ifdef CONFIG_CRASH_DUMP
/* elfcorehdr= specifies the location of elf core header
* stored by the crashed kernel.
*/
@ -491,7 +496,9 @@ static int __init parse_elfcorehdr(char *arg)
return 0;
}
early_param("elfcorehdr", parse_elfcorehdr);
#endif
#ifdef CONFIG_PROC_VMCORE
int __init reserve_elfcorehdr(unsigned long *start, unsigned long *end)
{
unsigned long length;

View file

@ -27,6 +27,9 @@
#define DBG(fmt...)
#endif
/* Stores the physical address of elf header of crash image. */
unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
void __init reserve_kdump_trampoline(void)
{
lmb_reserve(0, KDUMP_RESERVE_LIMIT);
@ -66,7 +69,11 @@ void __init setup_kdump_trampoline(void)
DBG(" <- setup_kdump_trampoline()\n");
}
#ifdef CONFIG_PROC_VMCORE
/*
* Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
* is_kdump_kernel() to determine if we are booting after a panic. Hence
* ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
*/
static int __init parse_elfcorehdr(char *p)
{
if (p)
@ -75,7 +82,6 @@ static int __init parse_elfcorehdr(char *p)
return 1;
}
__setup("elfcorehdr=", parse_elfcorehdr);
#endif
static int __init parse_savemaxmem(char *p)
{

View file

@ -10,6 +10,9 @@
#include <linux/io.h>
#include <asm/uaccess.h>
/* Stores the physical address of elf header of crash image. */
unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied

View file

@ -13,6 +13,9 @@
static void *kdump_buf_page;
/* Stores the physical address of elf header of crash image. */
unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied

View file

@ -10,6 +10,9 @@
#include <linux/uaccess.h>
#include <linux/io.h>
/* Stores the physical address of elf header of crash image. */
unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied

View file

@ -561,7 +561,13 @@ static void __init reserve_standard_io_resources(void)
}
#ifdef CONFIG_PROC_VMCORE
/*
* Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
* is_kdump_kernel() to determine if we are booting after a panic. Hence
* ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
*/
#ifdef CONFIG_CRASH_DUMP
/* elfcorehdr= specifies the location of elf core header
* stored by the crashed kernel. This option will be passed
* by kexec loader to the capture kernel.

View file

@ -32,9 +32,6 @@ static size_t elfcorebuf_sz;
/* Total size of vmcore file. */
static u64 vmcore_size;
/* Stores the physical address of elf header of crash image. */
unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
struct proc_dir_entry *proc_vmcore = NULL;
/* Reads a page from the oldmem device from given offset. */

View file

@ -9,11 +9,7 @@
#define ELFCORE_ADDR_MAX (-1ULL)
#ifdef CONFIG_PROC_VMCORE
extern unsigned long long elfcorehdr_addr;
#else
static const unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
#endif
extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
unsigned long, int);
@ -28,6 +24,16 @@ extern struct proc_dir_entry *proc_vmcore;
#define vmcore_elf_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
/*
* is_kdump_kernel() checks whether this kernel is booting after a panic of
* previous kernel or not. This is determined by checking if previous kernel
* has passed the elf core header address on command line.
*
* This is not just a test if CONFIG_CRASH_DUMP is enabled or not. It will
* return 1 if CONFIG_CRASH_DUMP=y and if kernel is booting after a panic of
* previous kernel.
*/
static inline int is_kdump_kernel(void)
{
return (elfcorehdr_addr != ELFCORE_ADDR_MAX) ? 1 : 0;