clk: move IM-PD1 clocks to drivers/clk

The ARM IM-PD1 add-on module has a few clock of its own, let's
move also these down to the drivers/clk/versatile driver dir
and get rid of any remaining oldschool Integrator clocks.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This commit is contained in:
Linus Walleij 2012-11-20 22:39:49 +01:00 committed by Mike Turquette
parent 7a9ad671ac
commit 70ee657714
4 changed files with 103 additions and 66 deletions

View File

@ -21,10 +21,9 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/io.h>
#include <linux/platform_data/clk-integrator.h>
#include <linux/slab.h>
#include <linux/clkdev.h>
#include <asm/hardware/icst.h>
#include <mach/lm.h>
#include <mach/impd1.h>
#include <asm/sizes.h>
@ -36,45 +35,6 @@ MODULE_PARM_DESC(lmid, "logic module stack position");
struct impd1_module {
void __iomem *base;
struct clk vcos[2];
struct clk_lookup *clks[3];
};
static const struct icst_params impd1_vco_params = {
.ref = 24000000, /* 24 MHz */
.vco_max = ICST525_VCO_MAX_3V,
.vco_min = ICST525_VCO_MIN,
.vd_min = 12,
.vd_max = 519,
.rd_min = 3,
.rd_max = 120,
.s2div = icst525_s2div,
.idx2s = icst525_idx2s,
};
static void impd1_setvco(struct clk *clk, struct icst_vco vco)
{
struct impd1_module *impd1 = clk->data;
u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
writel(0xa05f, impd1->base + IMPD1_LOCK);
writel(val, clk->vcoreg);
writel(0, impd1->base + IMPD1_LOCK);
#ifdef DEBUG
vco.v = val & 0x1ff;
vco.r = (val >> 9) & 0x7f;
vco.s = (val >> 16) & 7;
pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
vconr, icst525_hz(&impd1_vco_params, vco));
#endif
}
static const struct clk_ops impd1_clk_ops = {
.round = icst_clk_round,
.set = icst_clk_set,
.setvco = impd1_setvco,
};
void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
@ -344,10 +304,6 @@ static struct impd1_device impd1_devs[] = {
}
};
static struct clk fixed_14745600 = {
.rate = 14745600,
};
static int impd1_probe(struct lm_device *dev)
{
struct impd1_module *impd1;
@ -376,23 +332,7 @@ static int impd1_probe(struct lm_device *dev)
printk("IM-PD1 found at 0x%08lx\n",
(unsigned long)dev->resource.start);
for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
impd1->vcos[i].ops = &impd1_clk_ops,
impd1->vcos[i].owner = THIS_MODULE,
impd1->vcos[i].params = &impd1_vco_params,
impd1->vcos[i].data = impd1;
}
impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
dev->id);
impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
dev->id);
impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
dev->id);
for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
clkdev_add(impd1->clks[i]);
integrator_impd1_clk_init(impd1->base, dev->id);
for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
struct impd1_device *idev = impd1_devs + i;
@ -431,12 +371,9 @@ static int impd1_remove_one(struct device *dev, void *data)
static void impd1_remove(struct lm_device *dev)
{
struct impd1_module *impd1 = lm_get_drvdata(dev);
int i;
device_for_each_child(&dev->dev, NULL, impd1_remove_one);
for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
clkdev_drop(impd1->clks[i]);
integrator_impd1_clk_exit(dev->id);
lm_set_drvdata(dev, NULL);

View File

@ -1,6 +1,7 @@
# Makefile for Versatile-specific clocks
obj-$(CONFIG_ICST) += clk-icst.o
obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o
obj-$(CONFIG_VEXPRESS_CONFIG) += clk-vexpress-osc.o

View File

@ -0,0 +1,97 @@
/*
* Clock driver for the ARM Integrator/IM-PD1 board
* Copyright (C) 2012 Linus Walleij
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk-provider.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_data/clk-integrator.h>
#include <mach/impd1.h>
#include "clk-icst.h"
struct impd1_clk {
struct clk *vcoclk;
struct clk *uartclk;
struct clk_lookup *clks[3];
};
static struct impd1_clk impd1_clks[4];
/*
* There are two VCO's on the IM-PD1 but only one is used by the
* kernel, that is why we are only implementing the control of
* IMPD1_OSC1 here.
*/
static const struct icst_params impd1_vco_params = {
.ref = 24000000, /* 24 MHz */
.vco_max = ICST525_VCO_MAX_3V,
.vco_min = ICST525_VCO_MIN,
.vd_min = 12,
.vd_max = 519,
.rd_min = 3,
.rd_max = 120,
.s2div = icst525_s2div,
.idx2s = icst525_idx2s,
};
static const struct clk_icst_desc impd1_icst1_desc = {
.params = &impd1_vco_params,
.vco_offset = IMPD1_OSC1,
.lock_offset = IMPD1_LOCK,
};
/**
* integrator_impd1_clk_init() - set up the integrator clock tree
* @base: base address of the logic module (LM)
* @id: the ID of this LM
*/
void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
{
struct impd1_clk *imc;
struct clk *clk;
int i;
if (id > 3) {
pr_crit("no more than 4 LMs can be attached\n");
return;
}
imc = &impd1_clks[id];
clk = icst_clk_register(NULL, &impd1_icst1_desc, base);
imc->vcoclk = clk;
imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
/* UART reference clock */
clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
14745600);
imc->uartclk = clk;
imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00100", id);
imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00200", id);
for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
clkdev_add(imc->clks[i]);
}
void integrator_impd1_clk_exit(unsigned int id)
{
int i;
struct impd1_clk *imc;
if (id > 3)
return;
imc = &impd1_clks[id];
for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
clkdev_drop(imc->clks[i]);
clk_unregister(imc->uartclk);
clk_unregister(imc->vcoclk);
}

View File

@ -1 +1,3 @@
void integrator_clk_init(bool is_cp);
void integrator_impd1_clk_init(void __iomem *base, unsigned int id);
void integrator_impd1_clk_exit(unsigned int id);