DRM: i915: add mode setting support

This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported.  HDMI, DisplayPort and additional SDVO output support will
follow.

Support for the mode setting code is controlled by the new 'modeset'
module option.  A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.

Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing.  So use caution when
enabling this code; be sure your user level code supports the new
interfaces.

A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.

Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit is contained in:
Jesse Barnes 2008-11-07 14:24:08 -08:00 committed by Dave Airlie
parent f453ba0460
commit 79e539453b
27 changed files with 10567 additions and 51 deletions

View File

@ -76,6 +76,17 @@ config DRM_I915
endchoice
config DRM_I915_KMS
bool "Enable modesetting on intel by default"
depends on DRM_I915
help
Choose this option if you want kernel modesetting enabled by default,
and you have a new enough userspace to support this. Running old
userspaces with this enabled will cause pain. Note that this causes
the driver to bind to PCI devices, which precludes loading things
like intelfb.
config DRM_MGA
tristate "Matrox g200/g400"
depends on DRM

View File

@ -8,7 +8,22 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \
i915_gem.o \
i915_gem_debug.o \
i915_gem_proc.o \
i915_gem_tiling.o
i915_gem_tiling.o \
intel_display.o \
intel_crt.o \
intel_lvds.o \
intel_bios.o \
intel_sdvo.o \
intel_modes.o \
intel_i2c.o \
intel_fb.o \
intel_tv.o \
intel_dvo.o \
dvo_ch7xxx.o \
dvo_ch7017.o \
dvo_ivch.o \
dvo_tfp410.o \
dvo_sil164.o
i915-$(CONFIG_ACPI) += i915_opregion.o
i915-$(CONFIG_COMPAT) += i915_ioc32.o

151
drivers/gpu/drm/i915/dvo.h Normal file
View File

@ -0,0 +1,151 @@
/*
* Copyright © 2006 Eric Anholt
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*/
#ifndef _INTEL_DVO_H
#define _INTEL_DVO_H
#include <linux/i2c.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
#include "intel_drv.h"
struct intel_dvo_device {
char *name;
int type;
/* DVOA/B/C output register */
u32 dvo_reg;
/* GPIO register used for i2c bus to control this device */
u32 gpio;
int slave_addr;
struct intel_i2c_chan *i2c_bus;
const struct intel_dvo_dev_ops *dev_ops;
void *dev_priv;
struct drm_display_mode *panel_fixed_mode;
bool panel_wants_dither;
};
struct intel_dvo_dev_ops {
/*
* Initialize the device at startup time.
* Returns NULL if the device does not exist.
*/
bool (*init)(struct intel_dvo_device *dvo,
struct intel_i2c_chan *i2cbus);
/*
* Called to allow the output a chance to create properties after the
* RandR objects have been created.
*/
void (*create_resources)(struct intel_dvo_device *dvo);
/*
* Turn on/off output or set intermediate power levels if available.
*
* Unsupported intermediate modes drop to the lower power setting.
* If the mode is DPMSModeOff, the output must be disabled,
* as the DPLL may be disabled afterwards.
*/
void (*dpms)(struct intel_dvo_device *dvo, int mode);
/*
* Saves the output's state for restoration on VT switch.
*/
void (*save)(struct intel_dvo_device *dvo);
/*
* Restore's the output's state at VT switch.
*/
void (*restore)(struct intel_dvo_device *dvo);
/*
* Callback for testing a video mode for a given output.
*
* This function should only check for cases where a mode can't
* be supported on the output specifically, and not represent
* generic CRTC limitations.
*
* \return MODE_OK if the mode is valid, or another MODE_* otherwise.
*/
int (*mode_valid)(struct intel_dvo_device *dvo,
struct drm_display_mode *mode);
/*
* Callback to adjust the mode to be set in the CRTC.
*
* This allows an output to adjust the clock or even the entire set of
* timings, which is used for panels with fixed timings or for
* buses with clock limitations.
*/
bool (*mode_fixup)(struct intel_dvo_device *dvo,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
/*
* Callback for preparing mode changes on an output
*/
void (*prepare)(struct intel_dvo_device *dvo);
/*
* Callback for committing mode changes on an output
*/
void (*commit)(struct intel_dvo_device *dvo);
/*
* Callback for setting up a video mode after fixups have been made.
*
* This is only called while the output is disabled. The dpms callback
* must be all that's necessary for the output, to turn the output on
* after this function is called.
*/
void (*mode_set)(struct intel_dvo_device *dvo,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
/*
* Probe for a connected output, and return detect_status.
*/
enum drm_connector_status (*detect)(struct intel_dvo_device *dvo);
/**
* Query the device for the modes it provides.
*
* This function may also update MonInfo, mm_width, and mm_height.
*
* \return singly-linked list of modes or NULL if no modes found.
*/
struct drm_display_mode *(*get_modes)(struct intel_dvo_device *dvo);
/**
* Clean up driver-specific bits of the output
*/
void (*destroy) (struct intel_dvo_device *dvo);
/**
* Debugging hook to dump device registers to log file
*/
void (*dump_regs)(struct intel_dvo_device *dvo);
};
#endif /* _INTEL_DVO_H */

View File

@ -0,0 +1,454 @@
/*
* Copyright © 2006 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*
*/
#include "dvo.h"
#define CH7017_TV_DISPLAY_MODE 0x00
#define CH7017_FLICKER_FILTER 0x01
#define CH7017_VIDEO_BANDWIDTH 0x02
#define CH7017_TEXT_ENHANCEMENT 0x03
#define CH7017_START_ACTIVE_VIDEO 0x04
#define CH7017_HORIZONTAL_POSITION 0x05
#define CH7017_VERTICAL_POSITION 0x06
#define CH7017_BLACK_LEVEL 0x07
#define CH7017_CONTRAST_ENHANCEMENT 0x08
#define CH7017_TV_PLL 0x09
#define CH7017_TV_PLL_M 0x0a
#define CH7017_TV_PLL_N 0x0b
#define CH7017_SUB_CARRIER_0 0x0c
#define CH7017_CIV_CONTROL 0x10
#define CH7017_CIV_0 0x11
#define CH7017_CHROMA_BOOST 0x14
#define CH7017_CLOCK_MODE 0x1c
#define CH7017_INPUT_CLOCK 0x1d
#define CH7017_GPIO_CONTROL 0x1e
#define CH7017_INPUT_DATA_FORMAT 0x1f
#define CH7017_CONNECTION_DETECT 0x20
#define CH7017_DAC_CONTROL 0x21
#define CH7017_BUFFERED_CLOCK_OUTPUT 0x22
#define CH7017_DEFEAT_VSYNC 0x47
#define CH7017_TEST_PATTERN 0x48
#define CH7017_POWER_MANAGEMENT 0x49
/** Enables the TV output path. */
#define CH7017_TV_EN (1 << 0)
#define CH7017_DAC0_POWER_DOWN (1 << 1)
#define CH7017_DAC1_POWER_DOWN (1 << 2)
#define CH7017_DAC2_POWER_DOWN (1 << 3)
#define CH7017_DAC3_POWER_DOWN (1 << 4)
/** Powers down the TV out block, and DAC0-3 */
#define CH7017_TV_POWER_DOWN_EN (1 << 5)
#define CH7017_VERSION_ID 0x4a
#define CH7017_DEVICE_ID 0x4b
#define CH7017_DEVICE_ID_VALUE 0x1b
#define CH7018_DEVICE_ID_VALUE 0x1a
#define CH7019_DEVICE_ID_VALUE 0x19
#define CH7017_XCLK_D2_ADJUST 0x53
#define CH7017_UP_SCALER_COEFF_0 0x55
#define CH7017_UP_SCALER_COEFF_1 0x56
#define CH7017_UP_SCALER_COEFF_2 0x57
#define CH7017_UP_SCALER_COEFF_3 0x58
#define CH7017_UP_SCALER_COEFF_4 0x59
#define CH7017_UP_SCALER_VERTICAL_INC_0 0x5a
#define CH7017_UP_SCALER_VERTICAL_INC_1 0x5b
#define CH7017_GPIO_INVERT 0x5c
#define CH7017_UP_SCALER_HORIZONTAL_INC_0 0x5d
#define CH7017_UP_SCALER_HORIZONTAL_INC_1 0x5e
#define CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT 0x5f
/**< Low bits of horizontal active pixel input */
#define CH7017_ACTIVE_INPUT_LINE_OUTPUT 0x60
/** High bits of horizontal active pixel input */
#define CH7017_LVDS_HAP_INPUT_MASK (0x7 << 0)
/** High bits of vertical active line output */
#define CH7017_LVDS_VAL_HIGH_MASK (0x7 << 3)
#define CH7017_VERTICAL_ACTIVE_LINE_OUTPUT 0x61
/**< Low bits of vertical active line output */
#define CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT 0x62
/**< Low bits of horizontal active pixel output */
#define CH7017_LVDS_POWER_DOWN 0x63
/** High bits of horizontal active pixel output */
#define CH7017_LVDS_HAP_HIGH_MASK (0x7 << 0)
/** Enables the LVDS power down state transition */
#define CH7017_LVDS_POWER_DOWN_EN (1 << 6)
/** Enables the LVDS upscaler */
#define CH7017_LVDS_UPSCALER_EN (1 << 7)
#define CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED 0x08
#define CH7017_LVDS_ENCODING 0x64
#define CH7017_LVDS_DITHER_2D (1 << 2)
#define CH7017_LVDS_DITHER_DIS (1 << 3)
#define CH7017_LVDS_DUAL_CHANNEL_EN (1 << 4)
#define CH7017_LVDS_24_BIT (1 << 5)
#define CH7017_LVDS_ENCODING_2 0x65
#define CH7017_LVDS_PLL_CONTROL 0x66
/** Enables the LVDS panel output path */
#define CH7017_LVDS_PANEN (1 << 0)
/** Enables the LVDS panel backlight */
#define CH7017_LVDS_BKLEN (1 << 3)
#define CH7017_POWER_SEQUENCING_T1 0x67
#define CH7017_POWER_SEQUENCING_T2 0x68
#define CH7017_POWER_SEQUENCING_T3 0x69
#define CH7017_POWER_SEQUENCING_T4 0x6a
#define CH7017_POWER_SEQUENCING_T5 0x6b
#define CH7017_GPIO_DRIVER_TYPE 0x6c
#define CH7017_GPIO_DATA 0x6d
#define CH7017_GPIO_DIRECTION_CONTROL 0x6e
#define CH7017_LVDS_PLL_FEEDBACK_DIV 0x71
# define CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT 4
# define CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT 0
# define CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED 0x80
#define CH7017_LVDS_PLL_VCO_CONTROL 0x72
# define CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED 0x80
# define CH7017_LVDS_PLL_VCO_SHIFT 4
# define CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT 0
#define CH7017_OUTPUTS_ENABLE 0x73
# define CH7017_CHARGE_PUMP_LOW 0x0
# define CH7017_CHARGE_PUMP_HIGH 0x3
# define CH7017_LVDS_CHANNEL_A (1 << 3)
# define CH7017_LVDS_CHANNEL_B (1 << 4)
# define CH7017_TV_DAC_A (1 << 5)
# define CH7017_TV_DAC_B (1 << 6)
# define CH7017_DDC_SELECT_DC2 (1 << 7)
#define CH7017_LVDS_OUTPUT_AMPLITUDE 0x74
#define CH7017_LVDS_PLL_EMI_REDUCTION 0x75
#define CH7017_LVDS_POWER_DOWN_FLICKER 0x76
#define CH7017_LVDS_CONTROL_2 0x78
# define CH7017_LOOP_FILTER_SHIFT 5
# define CH7017_PHASE_DETECTOR_SHIFT 0
#define CH7017_BANG_LIMIT_CONTROL 0x7f
struct ch7017_priv {
uint8_t save_hapi;
uint8_t save_vali;
uint8_t save_valo;
uint8_t save_ailo;
uint8_t save_lvds_pll_vco;
uint8_t save_feedback_div;
uint8_t save_lvds_control_2;
uint8_t save_outputs_enable;
uint8_t save_lvds_power_down;
uint8_t save_power_management;
};
static void ch7017_dump_regs(struct intel_dvo_device *dvo);
static void ch7017_dpms(struct intel_dvo_device *dvo, int mode);
static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val)
{
struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
.addr = i2cbus->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
.addr = i2cbus->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
}
};
out_buf[0] = addr;
out_buf[1] = 0;
if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
*val= in_buf[0];
return true;
};
return false;
}
static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val)
{
struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
uint8_t out_buf[2];
struct i2c_msg msg = {
.addr = i2cbus->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
};
out_buf[0] = addr;
out_buf[1] = val;
if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
return true;
return false;
}
/** Probes for a CH7017 on the given bus and slave address. */
static bool ch7017_init(struct intel_dvo_device *dvo,
struct intel_i2c_chan *i2cbus)
{
struct ch7017_priv *priv;
uint8_t val;
priv = kzalloc(sizeof(struct ch7017_priv), GFP_KERNEL);
if (priv == NULL)
return false;
dvo->i2c_bus = i2cbus;
dvo->i2c_bus->slave_addr = dvo->slave_addr;
dvo->dev_priv = priv;
if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val))
goto fail;
if (val != CH7017_DEVICE_ID_VALUE &&
val != CH7018_DEVICE_ID_VALUE &&
val != CH7019_DEVICE_ID_VALUE) {
DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n",
val, i2cbus->adapter.name,i2cbus->slave_addr);
goto fail;
}
return true;
fail:
kfree(priv);
return false;
}
static enum drm_connector_status ch7017_detect(struct intel_dvo_device *dvo)
{
return connector_status_unknown;
}
static enum drm_mode_status ch7017_mode_valid(struct intel_dvo_device *dvo,
struct drm_display_mode *mode)
{
if (mode->clock > 160000)
return MODE_CLOCK_HIGH;
return MODE_OK;
}
static void ch7017_mode_set(struct intel_dvo_device *dvo,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
uint8_t lvds_pll_feedback_div, lvds_pll_vco_control;
uint8_t outputs_enable, lvds_control_2, lvds_power_down;
uint8_t horizontal_active_pixel_input;
uint8_t horizontal_active_pixel_output, vertical_active_line_output;
uint8_t active_input_line_output;
DRM_DEBUG("Registers before mode setting\n");
ch7017_dump_regs(dvo);
/* LVDS PLL settings from page 75 of 7017-7017ds.pdf*/
if (mode->clock < 100000) {
outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_LOW;
lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED |
(2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) |
(13 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT);
lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
(2 << CH7017_LVDS_PLL_VCO_SHIFT) |
(3 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
lvds_control_2 = (1 << CH7017_LOOP_FILTER_SHIFT) |
(0 << CH7017_PHASE_DETECTOR_SHIFT);
} else {
outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_HIGH;
lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED |
(2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) |
(3 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT);
lvds_pll_feedback_div = 35;
lvds_control_2 = (3 << CH7017_LOOP_FILTER_SHIFT) |
(0 << CH7017_PHASE_DETECTOR_SHIFT);
if (1) { /* XXX: dual channel panel detection. Assume yes for now. */
outputs_enable |= CH7017_LVDS_CHANNEL_B;
lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
(2 << CH7017_LVDS_PLL_VCO_SHIFT) |
(13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
} else {
lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
(1 << CH7017_LVDS_PLL_VCO_SHIFT) |
(13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
}
}
horizontal_active_pixel_input = mode->hdisplay & 0x00ff;
vertical_active_line_output = mode->vdisplay & 0x00ff;
horizontal_active_pixel_output = mode->hdisplay & 0x00ff;
active_input_line_output = ((mode->hdisplay & 0x0700) >> 8) |
(((mode->vdisplay & 0x0700) >> 8) << 3);
lvds_power_down = CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED |
(mode->hdisplay & 0x0700) >> 8;
ch7017_dpms(dvo, DRM_MODE_DPMS_OFF);
ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT,
horizontal_active_pixel_input);
ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT,
horizontal_active_pixel_output);
ch7017_write(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT,
vertical_active_line_output);
ch7017_write(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT,
active_input_line_output);
ch7017_write(dvo, CH7017_LVDS_PLL_VCO_CONTROL, lvds_pll_vco_control);
ch7017_write(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, lvds_pll_feedback_div);
ch7017_write(dvo, CH7017_LVDS_CONTROL_2, lvds_control_2);
ch7017_write(dvo, CH7017_OUTPUTS_ENABLE, outputs_enable);
/* Turn the LVDS back on with new settings. */
ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, lvds_power_down);
DRM_DEBUG("Registers after mode setting\n");
ch7017_dump_regs(dvo);
}
/* set the CH7017 power state */
static void ch7017_dpms(struct intel_dvo_device *dvo, int mode)
{
uint8_t val;
ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &val);
/* Turn off TV/VGA, and never turn it on since we don't support it. */
ch7017_write(dvo, CH7017_POWER_MANAGEMENT,
CH7017_DAC0_POWER_DOWN |
CH7017_DAC1_POWER_DOWN |
CH7017_DAC2_POWER_DOWN |
CH7017_DAC3_POWER_DOWN |
CH7017_TV_POWER_DOWN_EN);
if (mode == DRM_MODE_DPMS_ON) {
/* Turn on the LVDS */
ch7017_write(dvo, CH7017_LVDS_POWER_DOWN,
val & ~CH7017_LVDS_POWER_DOWN_EN);
} else {
/* Turn off the LVDS */
ch7017_write(dvo, CH7017_LVDS_POWER_DOWN,
val | CH7017_LVDS_POWER_DOWN_EN);
}
/* XXX: Should actually wait for update power status somehow */
udelay(20000);
}
static void ch7017_dump_regs(struct intel_dvo_device *dvo)
{
uint8_t val;
#define DUMP(reg) \
do { \
ch7017_read(dvo, reg, &val); \
DRM_DEBUG(#reg ": %02x\n", val); \
} while (0)
DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT);
DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT);
DUMP(CH7017_VERTICAL_ACTIVE_LINE_OUTPUT);
DUMP(CH7017_ACTIVE_INPUT_LINE_OUTPUT);
DUMP(CH7017_LVDS_PLL_VCO_CONTROL);
DUMP(CH7017_LVDS_PLL_FEEDBACK_DIV);
DUMP(CH7017_LVDS_CONTROL_2);
DUMP(CH7017_OUTPUTS_ENABLE);
DUMP(CH7017_LVDS_POWER_DOWN);
}
static void ch7017_save(struct intel_dvo_device *dvo)
{
struct ch7017_priv *priv = dvo->dev_priv;
ch7017_read(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT, &priv->save_hapi);
ch7017_read(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT, &priv->save_valo);
ch7017_read(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT, &priv->save_ailo);
ch7017_read(dvo, CH7017_LVDS_PLL_VCO_CONTROL, &priv->save_lvds_pll_vco);
ch7017_read(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, &priv->save_feedback_div);
ch7017_read(dvo, CH7017_LVDS_CONTROL_2, &priv->save_lvds_control_2);
ch7017_read(dvo, CH7017_OUTPUTS_ENABLE, &priv->save_outputs_enable);
ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &priv->save_lvds_power_down);
ch7017_read(dvo, CH7017_POWER_MANAGEMENT, &priv->save_power_management);
}
static void ch7017_restore(struct intel_dvo_device *dvo)
{
struct ch7017_priv *priv = dvo->dev_priv;
/* Power down before changing mode */
ch7017_dpms(dvo, DRM_MODE_DPMS_OFF);
ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT, priv->save_hapi);
ch7017_write(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT, priv->save_valo);
ch7017_write(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT, priv->save_ailo);
ch7017_write(dvo, CH7017_LVDS_PLL_VCO_CONTROL, priv->save_lvds_pll_vco);
ch7017_write(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, priv->save_feedback_div);
ch7017_write(dvo, CH7017_LVDS_CONTROL_2, priv->save_lvds_control_2);
ch7017_write(dvo, CH7017_OUTPUTS_ENABLE, priv->save_outputs_enable);
ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, priv->save_lvds_power_down);
ch7017_write(dvo, CH7017_POWER_MANAGEMENT, priv->save_power_management);
}
static void ch7017_destroy(struct intel_dvo_device *dvo)
{
struct ch7017_priv *priv = dvo->dev_priv;
if (priv) {
kfree(priv);
dvo->dev_priv = NULL;
}
}
struct intel_dvo_dev_ops ch7017_ops = {
.init = ch7017_init,
.detect = ch7017_detect,
.mode_valid = ch7017_mode_valid,
.mode_set = ch7017_mode_set,
.dpms = ch7017_dpms,
.dump_regs = ch7017_dump_regs,
.save = ch7017_save,
.restore = ch7017_restore,
.destroy = ch7017_destroy,
};

View File

@ -0,0 +1,368 @@
/**************************************************************************
Copyright © 2006 Dave Airlie
All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sub license, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice (including the
next paragraph) shall be included in all copies or substantial portions
of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
**************************************************************************/
#include "dvo.h"
#define CH7xxx_REG_VID 0x4a
#define CH7xxx_REG_DID 0x4b
#define CH7011_VID 0x83 /* 7010 as well */
#define CH7009A_VID 0x84
#define CH7009B_VID 0x85
#define CH7301_VID 0x95
#define CH7xxx_VID 0x84
#define CH7xxx_DID 0x17
#define CH7xxx_NUM_REGS 0x4c
#define CH7xxx_CM 0x1c
#define CH7xxx_CM_XCM (1<<0)
#define CH7xxx_CM_MCP (1<<2)
#define CH7xxx_INPUT_CLOCK 0x1d
#define CH7xxx_GPIO 0x1e
#define CH7xxx_GPIO_HPIR (1<<3)
#define CH7xxx_IDF 0x1f
#define CH7xxx_IDF_HSP (1<<3)
#define CH7xxx_IDF_VSP (1<<4)
#define CH7xxx_CONNECTION_DETECT 0x20
#define CH7xxx_CDET_DVI (1<<5)
#define CH7301_DAC_CNTL 0x21
#define CH7301_HOTPLUG 0x23
#define CH7xxx_TCTL 0x31
#define CH7xxx_TVCO 0x32
#define CH7xxx_TPCP 0x33
#define CH7xxx_TPD 0x34
#define CH7xxx_TPVT 0x35
#define CH7xxx_TLPF 0x36
#define CH7xxx_TCT 0x37
#define CH7301_TEST_PATTERN 0x48
#define CH7xxx_PM 0x49
#define CH7xxx_PM_FPD (1<<0)
#define CH7301_PM_DACPD0 (1<<1)
#define CH7301_PM_DACPD1 (1<<2)
#define CH7301_PM_DACPD2 (1<<3)
#define CH7xxx_PM_DVIL (1<<6)
#define CH7xxx_PM_DVIP (1<<7)
#define CH7301_SYNC_POLARITY 0x56
#define CH7301_SYNC_RGB_YUV (1<<0)
#define CH7301_SYNC_POL_DVI (1<<5)
/** @file
* driver for the Chrontel 7xxx DVI chip over DVO.
*/
static struct ch7xxx_id_struct {
uint8_t vid;
char *name;
} ch7xxx_ids[] = {
{ CH7011_VID, "CH7011" },
{ CH7009A_VID, "CH7009A" },
{ CH7009B_VID, "CH7009B" },
{ CH7301_VID, "CH7301" },
};
struct ch7xxx_reg_state {
uint8_t regs[CH7xxx_NUM_REGS];
};
struct ch7xxx_priv {
bool quiet;
struct ch7xxx_reg_state save_reg;
struct ch7xxx_reg_state mode_reg;
uint8_t save_TCTL, save_TPCP, save_TPD, save_TPVT;
uint8_t save_TLPF, save_TCT, save_PM, save_IDF;
};
static void ch7xxx_save(struct intel_dvo_device *dvo);
static char *ch7xxx_get_id(uint8_t vid)
{
int i;
for (i = 0; i < ARRAY_SIZE(ch7xxx_ids); i++) {
if (ch7xxx_ids[i].vid == vid)
return ch7xxx_ids[i].name;
}
return NULL;
}
/** Reads an 8 bit register */
static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
.addr = i2cbus->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
.addr = i2cbus->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
}
};
out_buf[0] = addr;
out_buf[1] = 0;
if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
*ch = in_buf[0];
return true;
};
if (!ch7xxx->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
addr, i2cbus->adapter.name, i2cbus->slave_addr);
}
return false;
}
/** Writes an 8 bit register */
static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
uint8_t out_buf[2];
struct i2c_msg msg = {
.addr = i2cbus->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
};
out_buf[0] = addr;
out_buf[1] = ch;
if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
return true;
if (!ch7xxx->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
addr, i2cbus->adapter.name, i2cbus->slave_addr);
}
return false;
}
static bool ch7xxx_init(struct intel_dvo_device *dvo,
struct intel_i2c_chan *i2cbus)
{
/* this will detect the CH7xxx chip on the specified i2c bus */
struct ch7xxx_priv *ch7xxx;
uint8_t vendor, device;
char *name;
ch7xxx = kzalloc(sizeof(struct ch7xxx_priv), GFP_KERNEL);
if (ch7xxx == NULL)
return false;
dvo->i2c_bus = i2cbus;
dvo->i2c_bus->slave_addr = dvo->slave_addr;
dvo->dev_priv = ch7xxx;
ch7xxx->quiet = true;
if (!ch7xxx_readb(dvo, CH7xxx_REG_VID, &vendor))
goto out;
name = ch7xxx_get_id(vendor);
if (!name) {
DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
vendor, i2cbus->adapter.name, i2cbus->slave_addr);
goto out;
}
if (!ch7xxx_readb(dvo, CH7xxx_REG_DID, &device))
goto out;
if (device != CH7xxx_DID) {
DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
vendor, i2cbus->adapter.name, i2cbus->slave_addr);
goto out;
}
ch7xxx->quiet = false;
DRM_DEBUG("Detected %s chipset, vendor/device ID 0x%02x/0x%02x\n",
name, vendor, device);
return true;
out:
kfree(ch7xxx);
return false;
}
static enum drm_connector_status ch7xxx_detect(struct intel_dvo_device *dvo)
{
uint8_t cdet, orig_pm, pm;
ch7xxx_readb(dvo, CH7xxx_PM, &orig_pm);
pm = orig_pm;
pm &= ~CH7xxx_PM_FPD;
pm |= CH7xxx_PM_DVIL | CH7xxx_PM_DVIP;
ch7xxx_writeb(dvo, CH7xxx_PM, pm);
ch7xxx_readb(dvo, CH7xxx_CONNECTION_DETECT, &cdet);
ch7xxx_writeb(dvo, CH7xxx_PM, orig_pm);
if (cdet & CH7xxx_CDET_DVI)
return connector_status_connected;
return connector_status_disconnected;
}
static enum drm_mode_status ch7xxx_mode_valid(struct intel_dvo_device *dvo,
struct drm_display_mode *mode)
{
if (mode->clock > 165000)
return MODE_CLOCK_HIGH;
return MODE_OK;
}
static void ch7xxx_mode_set(struct intel_dvo_device *dvo,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
uint8_t tvco, tpcp, tpd, tlpf, idf;
if (mode->clock <= 65000) {
tvco = 0x23;
tpcp = 0x08;
tpd = 0x16;
tlpf = 0x60;
} else {
tvco = 0x2d;
tpcp = 0x06;
tpd = 0x26;
tlpf = 0xa0;
}
ch7xxx_writeb(dvo, CH7xxx_TCTL, 0x00);
ch7xxx_writeb(dvo, CH7xxx_TVCO, tvco);
ch7xxx_writeb(dvo, CH7xxx_TPCP, tpcp);
ch7xxx_writeb(dvo, CH7xxx_TPD, tpd);
ch7xxx_writeb(dvo, CH7xxx_TPVT, 0x30);
ch7xxx_writeb(dvo, CH7xxx_TLPF, tlpf);
ch7xxx_writeb(dvo, CH7xxx_TCT, 0x00);
ch7xxx_readb(dvo, CH7xxx_IDF, &idf);
idf &= ~(CH7xxx_IDF_HSP | CH7xxx_IDF_VSP);
if (mode->flags & DRM_MODE_FLAG_PHSYNC)
idf |= CH7xxx_IDF_HSP;
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
idf |= CH7xxx_IDF_HSP;
ch7xxx_writeb(dvo, CH7xxx_IDF, idf);
}
/* set the CH7xxx power state */
static void ch7xxx_dpms(struct intel_dvo_device *dvo, int mode)
{
if (mode == DRM_MODE_DPMS_ON)
ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_DVIL | CH7xxx_PM_DVIP);
else
ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_FPD);
}
static void ch7xxx_dump_regs(struct intel_dvo_device *dvo)
{
struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
int i;
for (i = 0; i < CH7xxx_NUM_REGS; i++) {
if ((i % 8) == 0 )
DRM_DEBUG("\n %02X: ", i);
DRM_DEBUG("%02X ", ch7xxx->mode_reg.regs[i]);
}
}
static void ch7xxx_save(struct intel_dvo_device *dvo)
{
struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
ch7xxx_readb(dvo, CH7xxx_TCTL, &ch7xxx->save_TCTL);
ch7xxx_readb(dvo, CH7xxx_TPCP, &ch7xxx->save_TPCP);
ch7xxx_readb(dvo, CH7xxx_TPD, &ch7xxx->save_TPD);
ch7xxx_readb(dvo, CH7xxx_TPVT, &ch7xxx->save_TPVT);
ch7xxx_readb(dvo, CH7xxx_TLPF, &ch7xxx->save_TLPF);
ch7xxx_readb(dvo, CH7xxx_PM, &ch7xxx->save_PM);
ch7xxx_readb(dvo, CH7xxx_IDF, &ch7xxx->save_IDF);
}
static void ch7xxx_restore(struct intel_dvo_device *dvo)
{
struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
ch7xxx_writeb(dvo, CH7xxx_TCTL, ch7xxx->save_TCTL);
ch7xxx_writeb(dvo, CH7xxx_TPCP, ch7xxx->save_TPCP);
ch7xxx_writeb(dvo, CH7xxx_TPD, ch7xxx->save_TPD);
ch7xxx_writeb(dvo, CH7xxx_TPVT, ch7xxx->save_TPVT);
ch7xxx_writeb(dvo, CH7xxx_TLPF, ch7xxx->save_TLPF);
ch7xxx_writeb(dvo, CH7xxx_IDF, ch7xxx->save_IDF);
ch7xxx_writeb(dvo, CH7xxx_PM, ch7xxx->save_PM);
}
static void ch7xxx_destroy(struct intel_dvo_device *dvo)
{
struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
if (ch7xxx) {
kfree(ch7xxx);
dvo->dev_priv = NULL;
}
}
struct intel_dvo_dev_ops ch7xxx_ops = {
.init = ch7xxx_init,
.detect = ch7xxx_detect,
.mode_valid = ch7xxx_mode_valid,
.mode_set = ch7xxx_mode_set,
.dpms = ch7xxx_dpms,
.dump_regs = ch7xxx_dump_regs,
.save = ch7xxx_save,
.restore = ch7xxx_restore,
.destroy = ch7xxx_destroy,
};

View File

@ -0,0 +1,442 @@
/*
* Copyright © 2006 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*
*/
#include "dvo.h"
/*
* register definitions for the i82807aa.
*
* Documentation on this chipset can be found in datasheet #29069001 at
* intel.com.
*/
/*
* VCH Revision & GMBus Base Addr
*/
#define VR00 0x00
# define VR00_BASE_ADDRESS_MASK 0x007f
/*
* Functionality Enable
*/
#define VR01 0x01
/*
* Enable the panel fitter
*/
# define VR01_PANEL_FIT_ENABLE (1 << 3)
/*
* Enables the LCD display.
*
* This must not be set while VR01_DVO_BYPASS_ENABLE is set.
*/
# define VR01_LCD_ENABLE (1 << 2)
/** Enables the DVO repeater. */
# define VR01_DVO_BYPASS_ENABLE (1 << 1)
/** Enables the DVO clock */
# define VR01_DVO_ENABLE (1 << 0)
/*
* LCD Interface Format
*/
#define VR10 0x10
/** Enables LVDS output instead of CMOS */
# define VR10_LVDS_ENABLE (1 << 4)
/** Enables 18-bit LVDS output. */
# define VR10_INTERFACE_1X18 (0 << 2)
/** Enables 24-bit LVDS or CMOS output */
# define VR10_INTERFACE_1X24 (1 << 2)
/** Enables 2x18-bit LVDS or CMOS output. */
# define VR10_INTERFACE_2X18 (2 << 2)
/** Enables 2x24-bit LVDS output */
# define VR10_INTERFACE_2X24 (3 << 2)
/*
* VR20 LCD Horizontal Display Size
*/
#define VR20 0x20
/*
* LCD Vertical Display Size
*/
#define VR21 0x20
/*
* Panel power down status
*/
#define VR30 0x30
/** Read only bit indicating that the panel is not in a safe poweroff state. */
# define VR30_PANEL_ON (1 << 15)
#define VR40 0x40
# define VR40_STALL_ENABLE (1 << 13)
# define VR40_VERTICAL_INTERP_ENABLE (1 << 12)
# define VR40_ENHANCED_PANEL_FITTING (1 << 11)
# define VR40_HORIZONTAL_INTERP_ENABLE (1 << 10)
# define VR40_AUTO_RATIO_ENABLE (1 << 9)
# define VR40_CLOCK_GATING_ENABLE (1 << 8)
/*
* Panel Fitting Vertical Ratio
* (((image_height - 1) << 16) / ((panel_height - 1))) >> 2
*/
#define VR41 0x41
/*
* Panel Fitting Horizontal Ratio
* (((image_width - 1) << 16) / ((panel_width - 1))) >> 2
*/
#define VR42 0x42
/*
* Horizontal Image Size
*/
#define VR43 0x43
/* VR80 GPIO 0
*/
#define VR80 0x80
#define VR81 0x81
#define VR82 0x82
#define VR83 0x83
#define VR84 0x84
#define VR85 0x85
#define VR86 0x86
#define VR87 0x87
/* VR88 GPIO 8
*/
#define VR88 0x88
/* Graphics BIOS scratch 0
*/
#define VR8E 0x8E
# define VR8E_PANEL_TYPE_MASK (0xf << 0)
# define VR8E_PANEL_INTERFACE_CMOS (0 << 4)
# define VR8E_PANEL_INTERFACE_LVDS (1 << 4)
# define VR8E_FORCE_DEFAULT_PANEL (1 << 5)
/* Graphics BIOS scratch 1
*/
#define VR8F 0x8F
# define VR8F_VCH_PRESENT (1 << 0)
# define VR8F_DISPLAY_CONN (1 << 1)
# define VR8F_POWER_MASK (0x3c)
# define VR8F_POWER_POS (2)
struct ivch_priv {
bool quiet;
uint16_t width, height;
uint16_t save_VR01;
uint16_t save_VR40;
};
static void ivch_dump_regs(struct intel_dvo_device *dvo);
/**
* Reads a register on the ivch.
*
* Each of the 256 registers are 16 bits long.
*/
static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
{
struct ivch_priv *priv = dvo->dev_priv;
struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
u8 out_buf[1];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
.addr = i2cbus->slave_addr,
.flags = I2C_M_RD,
.len = 0,
},
{
.addr = 0,
.flags = I2C_M_NOSTART,
.len = 1,
.buf = out_buf,
},
{
.addr = i2cbus->slave_addr,
.flags = I2C_M_RD | I2C_M_NOSTART,
.len = 2,
.buf = in_buf,
}
};
out_buf[0] = addr;
if (i2c_transfer(&i2cbus->adapter, msgs, 3) == 3) {
*data = (in_buf[1] << 8) | in_buf[0];
return true;
};
if (!priv->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
addr, i2cbus->adapter.name, i2cbus->slave_addr);
}
return false;
}
/** Writes a 16-bit register on the ivch */
static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
{
struct ivch_priv *priv = dvo->dev_priv;
struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
u8 out_buf[3];
struct i2c_msg msg = {
.addr = i2cbus->slave_addr,
.flags = 0,
.len = 3,
.buf = out_buf,
};
out_buf[0] = addr;
out_buf[1] = data & 0xff;
out_buf[2] = data >> 8;
if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
return true;
if (!priv->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
addr, i2cbus->adapter.name, i2cbus->slave_addr);
}
return false;
}
/** Probes the given bus and slave address for an ivch */
static bool ivch_init(struct intel_dvo_device *dvo,
struct intel_i2c_chan *i2cbus)
{
struct ivch_priv *priv;
uint16_t temp;
priv = kzalloc(sizeof(struct ivch_priv), GFP_KERNEL);
if (priv == NULL)
return false;
dvo->i2c_bus = i2cbus;
dvo->i2c_bus->slave_addr = dvo->slave_addr;
dvo->dev_priv = priv;
priv->quiet = true;
if (!ivch_read(dvo, VR00, &temp))
goto out;
priv->quiet = false;
/* Since the identification bits are probably zeroes, which doesn't seem
* very unique, check that the value in the base address field matches
* the address it's responding on.
*/
if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) {
DRM_DEBUG("ivch detect failed due to address mismatch "
"(%d vs %d)\n",
(temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr);
goto out;
}
ivch_read(dvo, VR20, &priv->width);
ivch_read(dvo, VR21, &priv->height);
return true;
out:
kfree(priv);
return false;
}
static enum drm_connector_status ivch_detect(struct intel_dvo_device *dvo)
{
return connector_status_connected;
}
static enum drm_mode_status ivch_mode_valid(struct intel_dvo_device *dvo,
struct drm_display_mode *mode)
{
if (mode->clock > 112000)
return MODE_CLOCK_HIGH;
return MODE_OK;
}
/** Sets the power state of the panel connected to the ivch */
static void ivch_dpms(struct intel_dvo_device *dvo, int mode)
{
int i;
uint16_t vr01, vr30, backlight;
/* Set the new power state of the panel. */
if (!ivch_read(dvo, VR01, &vr01))
return;
if (mode == DRM_MODE_DPMS_ON)
backlight = 1;
else
backlight = 0;
ivch_write(dvo, VR80, backlight);
if (mode == DRM_MODE_DPMS_ON)
vr01 |= VR01_LCD_ENABLE | VR01_DVO_ENABLE;
else
vr01 &= ~(VR01_LCD_ENABLE | VR01_DVO_ENABLE);
ivch_write(dvo, VR01, vr01);
/* Wait for the panel to make its state transition */
for (i = 0; i < 100; i++) {
if (!ivch_read(dvo, VR30, &vr30))
break;
if (((vr30 & VR30_PANEL_ON) != 0) == (mode == DRM_MODE_DPMS_ON))
break;
udelay(1000);
}
/* wait some more; vch may fail to resync sometimes without this */
udelay(16 * 1000);
}
static void ivch_mode_set(struct intel_dvo_device *dvo,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
uint16_t vr40 = 0;
uint16_t vr01;
vr01 = 0;
vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE |
VR40_HORIZONTAL_INTERP_ENABLE);
if (mode->hdisplay != adjusted_mode->hdisplay ||
mode->vdisplay != adjusted_mode->vdisplay) {
uint16_t x_ratio, y_ratio;
vr01 |= VR01_PANEL_FIT_ENABLE;
vr40 |= VR40_CLOCK_GATING_ENABLE;
x_ratio = (((mode->hdisplay - 1) << 16) /
(adjusted_mode->hdisplay - 1)) >> 2;
y_ratio = (((mode->vdisplay - 1) << 16) /
(adjusted_mode->vdisplay - 1)) >> 2;
ivch_write (dvo, VR42, x_ratio);
ivch_write (dvo, VR41, y_ratio);
} else {
vr01 &= ~VR01_PANEL_FIT_ENABLE;
vr40 &= ~VR40_CLOCK_GATING_ENABLE;
}
vr40 &= ~VR40_AUTO_RATIO_ENABLE;
ivch_write(dvo, VR01, vr01);
ivch_write(dvo, VR40, vr40);
ivch_dump_regs(dvo);
}
static void ivch_dump_regs(struct intel_dvo_device *dvo)
{
uint16_t val;
ivch_read(dvo, VR00, &val);
DRM_DEBUG("VR00: 0x%04x\n", val);
ivch_read(dvo, VR01, &val);
DRM_DEBUG("VR01: 0x%04x\n", val);
ivch_read(dvo, VR30, &val);
DRM_DEBUG("VR30: 0x%04x\n", val);
ivch_read(dvo, VR40, &val);
DRM_DEBUG("VR40: 0x%04x\n", val);
/* GPIO registers */
ivch_read(dvo, VR80, &val);
DRM_DEBUG("VR80: 0x%04x\n", val);
ivch_read(dvo, VR81, &val);
DRM_DEBUG("VR81: 0x%04x\n", val);
ivch_read(dvo, VR82, &val);
DRM_DEBUG("VR82: 0x%04x\n", val);
ivch_read(dvo, VR83, &val);
DRM_DEBUG("VR83: 0x%04x\n", val);
ivch_read(dvo, VR84, &val);
DRM_DEBUG("VR84: 0x%04x\n", val);
ivch_read(dvo, VR85, &val);
DRM_DEBUG("VR85: 0x%04x\n", val);
ivch_read(dvo, VR86, &val);
DRM_DEBUG("VR86: 0x%04x\n", val);
ivch_read(dvo, VR87, &val);
DRM_DEBUG("VR87: 0x%04x\n", val);
ivch_read(dvo, VR88, &val);
DRM_DEBUG("VR88: 0x%04x\n", val);
/* Scratch register 0 - AIM Panel type */
ivch_read(dvo, VR8E, &val);
DRM_DEBUG("VR8E: 0x%04x\n", val);
/* Scratch register 1 - Status register */
ivch_read(dvo, VR8F, &val);
DRM_DEBUG("VR8F: 0x%04x\n", val);
}
static void ivch_save(struct intel_dvo_device *dvo)
{
struct ivch_priv *priv = dvo->dev_priv;
ivch_read(dvo, VR01, &priv->save_VR01);
ivch_read(dvo, VR40, &priv->save_VR40);
}
static void ivch_restore(struct intel_dvo_device *dvo)
{
struct ivch_priv *priv = dvo->dev_priv;
ivch_write(dvo, VR01, priv->save_VR01);
ivch_write(dvo, VR40, priv->save_VR40);
}
static void ivch_destroy(struct intel_dvo_device *dvo)
{
struct ivch_priv *priv = dvo->dev_priv;
if (priv) {
kfree(priv);
dvo->dev_priv = NULL;
}
}
struct intel_dvo_dev_ops ivch_ops= {
.init = ivch_init,
.dpms = ivch_dpms,
.save = ivch_save,
.restore = ivch_restore,
.mode_valid = ivch_mode_valid,
.mode_set = ivch_mode_set,
.detect = ivch_detect,
.dump_regs = ivch_dump_regs,
.destroy = ivch_destroy,
};

View File

@ -0,0 +1,302 @@
/**************************************************************************
Copyright © 2006 Dave Airlie
All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sub license, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice (including the
next paragraph) shall be included in all copies or substantial portions
of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
**************************************************************************/
#include "dvo.h"
#define SIL164_VID 0x0001
#define SIL164_DID 0x0006
#define SIL164_VID_LO 0x00
#define SIL164_VID_HI 0x01
#define SIL164_DID_LO 0x02
#define SIL164_DID_HI 0x03
#define SIL164_REV 0x04
#define SIL164_RSVD 0x05
#define SIL164_FREQ_LO 0x06
#define SIL164_FREQ_HI 0x07
#define SIL164_REG8 0x08
#define SIL164_8_VEN (1<<5)
#define SIL164_8_HEN (1<<4)
#define SIL164_8_DSEL (1<<3)
#define SIL164_8_BSEL (1<<2)
#define SIL164_8_EDGE (1<<1)
#define SIL164_8_PD (1<<0)
#define SIL164_REG9 0x09
#define SIL164_9_VLOW (1<<7)
#define SIL164_9_MSEL_MASK (0x7<<4)
#define SIL164_9_TSEL (1<<3)
#define SIL164_9_RSEN (1<<2)
#define SIL164_9_HTPLG (1<<1)
#define SIL164_9_MDI (1<<0)
#define SIL164_REGC 0x0c
struct sil164_save_rec {
uint8_t reg8;
uint8_t reg9;
uint8_t regc;
};
struct sil164_priv {
//I2CDevRec d;
bool quiet;
struct sil164_save_rec save_regs;
struct sil164_save_rec mode_regs;
};
#define SILPTR(d) ((SIL164Ptr)(d->DriverPrivate.ptr))
static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct sil164_priv *sil = dvo->dev_priv;
struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
.addr = i2cbus->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
.addr = i2cbus->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
}
};
out_buf[0] = addr;
out_buf[1] = 0;
if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
*ch = in_buf[0];
return true;
};
if (!sil->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
addr, i2cbus->adapter.name, i2cbus->slave_addr);
}
return false;
}
static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct sil164_priv *sil= dvo->dev_priv;
struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
uint8_t out_buf[2];
struct i2c_msg msg = {
.addr = i2cbus->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
};
out_buf[0] = addr;
out_buf[1] = ch;
if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
return true;
if (!sil->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
addr, i2cbus->adapter.name, i2cbus->slave_addr);
}
return false;
}
/* Silicon Image 164 driver for chip on i2c bus */
static bool sil164_init(struct intel_dvo_device *dvo,
struct intel_i2c_chan *i2cbus)
{
/* this will detect the SIL164 chip on the specified i2c bus */
struct sil164_priv *sil;
unsigned char ch;
sil = kzalloc(sizeof(struct sil164_priv), GFP_KERNEL);
if (sil == NULL)
return false;
dvo->i2c_bus = i2cbus;
dvo->i2c_bus->slave_addr = dvo->slave_addr;
dvo->dev_priv = sil;
sil->quiet = true;
if (!sil164_readb(dvo, SIL164_VID_LO, &ch))
goto out;
if (ch != (SIL164_VID & 0xff)) {
DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
ch, i2cbus->adapter.name, i2cbus->slave_addr);
goto out;
}
if (!sil164_readb(dvo, SIL164_DID_LO, &ch))
goto out;
if (ch != (SIL164_DID & 0xff)) {
DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
ch, i2cbus->adapter.name, i2cbus->slave_addr);
goto out;
}
sil->quiet = false;
DRM_DEBUG("init sil164 dvo controller successfully!\n");
return true;
out:
kfree(sil);
return false;
}
static enum drm_connector_status sil164_detect(struct intel_dvo_device *dvo)
{
uint8_t reg9;
sil164_readb(dvo, SIL164_REG9, &reg9);
if (reg9 & SIL164_9_HTPLG)
return connector_status_connected;
else
return connector_status_disconnected;
}
static enum drm_mode_status sil164_mode_valid(struct intel_dvo_device *dvo,
struct drm_display_mode *mode)
{
return MODE_OK;
}
static void sil164_mode_set(struct intel_dvo_device *dvo,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
/* As long as the basics are set up, since we don't have clock
* dependencies in the mode setup, we can just leave the
* registers alone and everything will work fine.
*/
/* recommended programming sequence from doc */
/*sil164_writeb(sil, 0x08, 0x30);
sil164_writeb(sil, 0x09, 0x00);
sil164_writeb(sil, 0x0a, 0x90);
sil164_writeb(sil, 0x0c, 0x89);
sil164_writeb(sil, 0x08, 0x31);*/
/* don't do much */
return;
}
/* set the SIL164 power state */
static void sil164_dpms(struct intel_dvo_device *dvo, int mode)
{
int ret;
unsigned char ch;
ret = sil164_readb(dvo, SIL164_REG8, &ch);
if (ret == false)
return;
if (mode == DRM_MODE_DPMS_ON)
ch |= SIL164_8_PD;
else
ch &= ~SIL164_8_PD;
sil164_writeb(dvo, SIL164_REG8, ch);
return;
}
static void sil164_dump_regs(struct intel_dvo_device *dvo)
{
uint8_t val;
sil164_readb(dvo, SIL164_FREQ_LO, &val);
DRM_DEBUG("SIL164_FREQ_LO: 0x%02x\n", val);
sil164_readb(dvo, SIL164_FREQ_HI, &val);
DRM_DEBUG("SIL164_FREQ_HI: 0x%02x\n", val);
sil164_readb(dvo, SIL164_REG8, &val);
DRM_DEBUG("SIL164_REG8: 0x%02x\n", val);
sil164_readb(dvo, SIL164_REG9, &val);
DRM_DEBUG("SIL164_REG9: 0x%02x\n", val);
sil164_readb(dvo, SIL164_REGC, &val);
DRM_DEBUG("SIL164_REGC: 0x%02x\n", val);
}
static void sil164_save(struct intel_dvo_device *dvo)
{
struct sil164_priv *sil= dvo->dev_priv;
if (!sil164_readb(dvo, SIL164_REG8, &sil->save_regs.reg8))
return;
if (!sil164_readb(dvo, SIL164_REG9, &sil->save_regs.reg9))
return;
if (!sil164_readb(dvo, SIL164_REGC, &sil->save_regs.regc))
return;
return;
}
static void sil164_restore(struct intel_dvo_device *dvo)
{
struct sil164_priv *sil = dvo->dev_priv;
/* Restore it powered down initially */
sil164_writeb(dvo, SIL164_REG8, sil->save_regs.reg8 & ~0x1);
sil164_writeb(dvo, SIL164_REG9, sil->save_regs.reg9);
sil164_writeb(dvo, SIL164_REGC, sil->save_regs.regc);
sil164_writeb(dvo, SIL164_REG8, sil->save_regs.reg8);
}
static void sil164_destroy(struct intel_dvo_device *dvo)
{
struct sil164_priv *sil = dvo->dev_priv;
if (sil) {
kfree(sil);
dvo->dev_priv = NULL;
}
}
struct intel_dvo_dev_ops sil164_ops = {
.init = sil164_init,
.detect = sil164_detect,
.mode_valid = sil164_mode_valid,
.mode_set = sil164_mode_set,
.dpms = sil164_dpms,
.dump_regs = sil164_dump_regs,
.save = sil164_save,
.restore = sil164_restore,
.destroy = sil164_destroy,
};

View File

@ -0,0 +1,335 @@
/*
* Copyright © 2007 Dave Mueller
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Dave Mueller <dave.mueller@gmx.ch>
*
*/
#include "dvo.h"
/* register definitions according to the TFP410 data sheet */
#define TFP410_VID 0x014C
#define TFP410_DID 0x0410
#define TFP410_VID_LO 0x00
#define TFP410_VID_HI 0x01
#define TFP410_DID_LO 0x02
#define TFP410_DID_HI 0x03
#define TFP410_REV 0x04
#define TFP410_CTL_1 0x08
#define TFP410_CTL_1_TDIS (1<<6)
#define TFP410_CTL_1_VEN (1<<5)
#define TFP410_CTL_1_HEN (1<<4)
#define TFP410_CTL_1_DSEL (1<<3)
#define TFP410_CTL_1_BSEL (1<<2)
#define TFP410_CTL_1_EDGE (1<<1)
#define TFP410_CTL_1_PD (1<<0)
#define TFP410_CTL_2 0x09
#define TFP410_CTL_2_VLOW (1<<7)
#define TFP410_CTL_2_MSEL_MASK (0x7<<4)
#define TFP410_CTL_2_MSEL (1<<4)
#define TFP410_CTL_2_TSEL (1<<3)
#define TFP410_CTL_2_RSEN (1<<2)
#define TFP410_CTL_2_HTPLG (1<<1)
#define TFP410_CTL_2_MDI (1<<0)
#define TFP410_CTL_3 0x0A
#define TFP410_CTL_3_DK_MASK (0x7<<5)
#define TFP410_CTL_3_DK (1<<5)
#define TFP410_CTL_3_DKEN (1<<4)
#define TFP410_CTL_3_CTL_MASK (0x7<<1)
#define TFP410_CTL_3_CTL (1<<1)
#define TFP410_USERCFG 0x0B
#define TFP410_DE_DLY 0x32
#define TFP410_DE_CTL 0x33
#define TFP410_DE_CTL_DEGEN (1<<6)
#define TFP410_DE_CTL_VSPOL (1<<5)
#define TFP410_DE_CTL_HSPOL (1<<4)
#define TFP410_DE_CTL_DEDLY8 (1<<0)
#define TFP410_DE_TOP 0x34
#define TFP410_DE_CNT_LO 0x36
#define TFP410_DE_CNT_HI 0x37
#define TFP410_DE_LIN_LO 0x38
#define TFP410_DE_LIN_HI 0x39
#define TFP410_H_RES_LO 0x3A
#define TFP410_H_RES_HI 0x3B
#define TFP410_V_RES_LO 0x3C
#define TFP410_V_RES_HI 0x3D
struct tfp410_save_rec {
uint8_t ctl1;
uint8_t ctl2;
};
struct tfp410_priv {
bool quiet;
struct tfp410_save_rec saved_reg;
struct tfp410_save_rec mode_reg;
};
static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
{
struct tfp410_priv *tfp = dvo->dev_priv;
struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
u8 out_buf[2];
u8 in_buf[2];
struct i2c_msg msgs[] = {
{
.addr = i2cbus->slave_addr,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
.addr = i2cbus->slave_addr,
.flags = I2C_M_RD,
.len = 1,
.buf = in_buf,
}
};
out_buf[0] = addr;
out_buf[1] = 0;
if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
*ch = in_buf[0];
return true;
};
if (!tfp->quiet) {
DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
addr, i2cbus->adapter.name, i2cbus->slave_addr);
}
return false;
}
static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
{
struct tfp410_priv *tfp = dvo->dev_priv;
struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
uint8_t out_buf[2];
struct i2c_msg msg = {
.addr = i2cbus->slave_addr,
.flags = 0,
.len = 2,
.buf = out_buf,
};
out_buf[0] = addr;
out_buf[1] = ch;
if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
return true;
if (!tfp->quiet) {
DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
addr, i2cbus->adapter.name, i2cbus->slave_addr);
}
return false;
}
static int tfp410_getid(struct intel_dvo_device *dvo, int addr)
{
uint8_t ch1, ch2;
if (tfp410_readb(dvo, addr+0, &ch1) &&
tfp410_readb(dvo, addr+1, &ch2))
return ((ch2 << 8) & 0xFF00) | (ch1 & 0x00FF);
return -1;
}
/* Ti TFP410 driver for chip on i2c bus */
static bool tfp410_init(struct intel_dvo_device *dvo,
struct intel_i2c_chan *i2cbus)
{
/* this will detect the tfp410 chip on the specified i2c bus */
struct tfp410_priv *tfp;
int id;
tfp = kzalloc(sizeof(struct tfp410_priv), GFP_KERNEL);
if (tfp == NULL)
return false;
dvo->i2c_bus = i2cbus;
dvo->i2c_bus->slave_addr = dvo->slave_addr;
dvo->dev_priv = tfp;
tfp->quiet = true;
if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) {
DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n",
id, i2cbus->adapter.name, i2cbus->slave_addr);
goto out;
}
if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) {
DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n",
id, i2cbus->adapter.name, i2cbus->slave_addr);
goto out;
}
tfp->quiet = false;
return true;
out:
kfree(tfp);
return false;
}
static enum drm_connector_status tfp410_detect(struct intel_dvo_device *dvo)
{
enum drm_connector_status ret = connector_status_disconnected;
uint8_t ctl2;
if (tfp410_readb(dvo, TFP410_CTL_2, &ctl2)) {
if (ctl2 & TFP410_CTL_2_HTPLG)
ret = connector_status_connected;
else
ret = connector_status_disconnected;
}
return ret;
}
static enum drm_mode_status tfp410_mode_valid(struct intel_dvo_device *dvo,
struct drm_display_mode *mode)
{
return MODE_OK;
}
static void tfp410_mode_set(struct intel_dvo_device *dvo,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
/* As long as the basics are set up, since we don't have clock dependencies
* in the mode setup, we can just leave the registers alone and everything
* will work fine.
*/
/* don't do much */
return;
}
/* set the tfp410 power state */
static void tfp410_dpms(struct intel_dvo_device *dvo, int mode)
{
uint8_t ctl1;
if (!tfp410_readb(dvo, TFP410_CTL_1, &ctl1))
return;
if (mode == DRM_MODE_DPMS_ON)
ctl1 |= TFP410_CTL_1_PD;
else
ctl1 &= ~TFP410_CTL_1_PD;
tfp410_writeb(dvo, TFP410_CTL_1, ctl1);
}
static void tfp410_dump_regs(struct intel_dvo_device *dvo)
{
uint8_t val, val2;
tfp410_readb(dvo, TFP410_REV, &val);
DRM_DEBUG("TFP410_REV: 0x%02X\n", val);
tfp410_readb(dvo, TFP410_CTL_1, &val);
DRM_DEBUG("TFP410_CTL1: 0x%02X\n", val);
tfp410_readb(dvo, TFP410_CTL_2, &val);
DRM_DEBUG("TFP410_CTL2: 0x%02X\n", val);
tfp410_readb(dvo, TFP410_CTL_3, &val);
DRM_DEBUG("TFP410_CTL3: 0x%02X\n", val);
tfp410_readb(dvo, TFP410_USERCFG, &val);
DRM_DEBUG("TFP410_USERCFG: 0x%02X\n", val);
tfp410_readb(dvo, TFP410_DE_DLY, &val);
DRM_DEBUG("TFP410_DE_DLY: 0x%02X\n", val);
tfp410_readb(dvo, TFP410_DE_CTL, &val);
DRM_DEBUG("TFP410_DE_CTL: 0x%02X\n", val);
tfp410_readb(dvo, TFP410_DE_TOP, &val);
DRM_DEBUG("TFP410_DE_TOP: 0x%02X\n", val);
tfp410_readb(dvo, TFP410_DE_CNT_LO, &val);
tfp410_readb(dvo, TFP410_DE_CNT_HI, &val2);
DRM_DEBUG("TFP410_DE_CNT: 0x%02X%02X\n", val2, val);
tfp410_readb(dvo, TFP410_DE_LIN_LO, &val);
tfp410_readb(dvo, TFP410_DE_LIN_HI, &val2);
DRM_DEBUG("TFP410_DE_LIN: 0x%02X%02X\n", val2, val);
tfp410_readb(dvo, TFP410_H_RES_LO, &val);
tfp410_readb(dvo, TFP410_H_RES_HI, &val2);
DRM_DEBUG("TFP410_H_RES: 0x%02X%02X\n", val2, val);
tfp410_readb(dvo, TFP410_V_RES_LO, &val);
tfp410_readb(dvo, TFP410_V_RES_HI, &val2);
DRM_DEBUG("TFP410_V_RES: 0x%02X%02X\n", val2, val);
}
static void tfp410_save(struct intel_dvo_device *dvo)
{
struct tfp410_priv *tfp = dvo->dev_priv;
if (!tfp410_readb(dvo, TFP410_CTL_1, &tfp->saved_reg.ctl1))
return;
if (!tfp410_readb(dvo, TFP410_CTL_2, &tfp->saved_reg.ctl2))
return;
}
static void tfp410_restore(struct intel_dvo_device *dvo)
{
struct tfp410_priv *tfp = dvo->dev_priv;
/* Restore it powered down initially */
tfp410_writeb(dvo, TFP410_CTL_1, tfp->saved_reg.ctl1 & ~0x1);
tfp410_writeb(dvo, TFP410_CTL_2, tfp->saved_reg.ctl2);
tfp410_writeb(dvo, TFP410_CTL_1, tfp->saved_reg.ctl1);
}
static void tfp410_destroy(struct intel_dvo_device *dvo)
{
struct tfp410_priv *tfp = dvo->dev_priv;
if (tfp) {
kfree(tfp);
dvo->dev_priv = NULL;
}
}
struct intel_dvo_dev_ops tfp410_ops = {
.init = tfp410_init,
.detect = tfp410_detect,
.mode_valid = tfp410_mode_valid,
.mode_set = tfp410_mode_set,
.dpms = tfp410_dpms,
.dump_regs = tfp410_dump_regs,
.save = tfp410_save,
.restore = tfp410_restore,
.destroy = tfp410_destroy,
};

View File

@ -28,6 +28,8 @@
#include "drmP.h"
#include "drm.h"
#include "drm_crtc_helper.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
@ -125,6 +127,13 @@ void i915_kernel_lost_context(struct drm_device * dev)
struct drm_i915_master_private *master_priv;
drm_i915_ring_buffer_t *ring = &(dev_priv->ring);
/*
* We should never lose context on the ring with modesetting
* as we don't expose it to userspace
*/
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
ring->space = ring->head - (ring->tail + 8);
@ -769,6 +778,11 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
return -EINVAL;
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
WARN(1, "tried to set status page when mode setting active\n");
return 0;
}
printk(KERN_DEBUG "set status page addr 0x%08x\n", (u32)hws->addr);
dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12);
@ -797,6 +811,173 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
return 0;
}
/**
* i915_probe_agp - get AGP bootup configuration
* @pdev: PCI device
* @aperture_size: returns AGP aperture configured size
* @preallocated_size: returns size of BIOS preallocated AGP space
*
* Since Intel integrated graphics are UMA, the BIOS has to set aside
* some RAM for the framebuffer at early boot. This code figures out
* how much was set aside so we can use it for our own purposes.
*/
int i915_probe_agp(struct pci_dev *pdev, unsigned long *aperture_size,
unsigned long *preallocated_size)
{
struct pci_dev *bridge_dev;
u16 tmp = 0;
unsigned long overhead;
bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
if (!bridge_dev) {
DRM_ERROR("bridge device not found\n");
return -1;
}
/* Get the fb aperture size and "stolen" memory amount. */
pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp);
pci_dev_put(bridge_dev);
*aperture_size = 1024 * 1024;
*preallocated_size = 1024 * 1024;
switch (pdev->device) {
case PCI_DEVICE_ID_INTEL_82830_CGC:
case PCI_DEVICE_ID_INTEL_82845G_IG:
case PCI_DEVICE_ID_INTEL_82855GM_IG:
case PCI_DEVICE_ID_INTEL_82865_IG:
if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
*aperture_size *= 64;
else
*aperture_size *= 128;
break;
default:
/* 9xx supports large sizes, just look at the length */
*aperture_size = pci_resource_len(pdev, 2);
break;
}
/*
* Some of the preallocated space is taken by the GTT
* and popup. GTT is 1K per MB of aperture size, and popup is 4K.
*/
overhead = (*aperture_size / 1024) + 4096;
switch (tmp & INTEL_855_GMCH_GMS_MASK) {
case INTEL_855_GMCH_GMS_STOLEN_1M:
break; /* 1M already */
case INTEL_855_GMCH_GMS_STOLEN_4M:
*preallocated_size *= 4;
break;
case INTEL_855_GMCH_GMS_STOLEN_8M:
*preallocated_size *= 8;
break;
case INTEL_855_GMCH_GMS_STOLEN_16M:
*preallocated_size *= 16;
break;
case INTEL_855_GMCH_GMS_STOLEN_32M:
*preallocated_size *= 32;
break;
case INTEL_915G_GMCH_GMS_STOLEN_48M:
*preallocated_size *= 48;
break;
case INTEL_915G_GMCH_GMS_STOLEN_64M:
*preallocated_size *= 64;
break;
case INTEL_855_GMCH_GMS_DISABLED:
DRM_ERROR("video memory is disabled\n");
return -1;
default:
DRM_ERROR("unexpected GMCH_GMS value: 0x%02x\n",
tmp & INTEL_855_GMCH_GMS_MASK);
return -1;
}
*preallocated_size -= overhead;
return 0;
}
static int i915_load_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long agp_size, prealloc_size;
int fb_bar = IS_I9XX(dev) ? 2 : 0;
int ret = 0;
dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
0xff000000;
DRM_DEBUG("*** fb base 0x%08lx\n", dev->mode_config.fb_base);
if (IS_MOBILE(dev) || (IS_I9XX(dev) && !IS_I965G(dev) && !IS_G33(dev)))
dev_priv->cursor_needs_physical = true;
else
dev_priv->cursor_needs_physical = false;
i915_probe_agp(dev->pdev, &agp_size, &prealloc_size);
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
/* Let GEM Manage from end of prealloc space to end of aperture */
i915_gem_do_init(dev, prealloc_size, agp_size);
ret = i915_gem_init_ringbuffer(dev);
if (ret)
goto out;
dev_priv->mm.gtt_mapping =
io_mapping_create_wc(dev->agp->base,
dev->agp->agp_info.aper_size * 1024*1024);
/* Allow hardware batchbuffers unless told otherwise.
*/
dev_priv->allow_batchbuffer = 1;
ret = intel_init_bios(dev);
if (ret)
DRM_INFO("failed to find VBIOS tables\n");
ret = drm_irq_install(dev);
if (ret)
goto destroy_ringbuffer;
/* FIXME: re-add hotplug support */
#if 0
ret = drm_hotplug_init(dev);
if (ret)
goto destroy_ringbuffer;
#endif
/* Always safe in the mode setting case. */
/* FIXME: do pre/post-mode set stuff in core KMS code */
dev->vblank_disable_allowed = 1;
/*
* Initialize the hardware status page IRQ location.
*/
I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
intel_modeset_init(dev);
drm_helper_initial_config(dev, false);
dev->devname = kstrdup(DRIVER_NAME, GFP_KERNEL);
if (!dev->devname) {
ret = -ENOMEM;
goto modeset_cleanup;
}
return 0;
modeset_cleanup:
intel_modeset_cleanup(dev);
destroy_ringbuffer:
i915_gem_cleanup_ringbuffer(dev);
out:
return ret;
}
int i915_master_create(struct drm_device *dev, struct drm_master *master)
{
struct drm_i915_master_private *master_priv;
@ -821,6 +1002,25 @@ void i915_master_destroy(struct drm_device *dev, struct drm_master *master)
master->driver_priv = NULL;
}
int i915_driver_firstopen(struct drm_device *dev)
{
if (drm_core_check_feature(dev, DRIVER_MODESET))
return 0;
return 0;
}
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
* @flags: startup flags
*
* The driver load routine has to do several things:
* - drive output discovery via intel_modeset_init()
* - initialize the memory manager
* - allocate initial config memory
* - setup the DRM framebuffer with the allocated memory
*/
int i915_driver_load(struct drm_device *dev, unsigned long flags)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@ -848,6 +1048,11 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
size = drm_get_resource_len(dev, mmio_bar);
dev_priv->regs = ioremap(base, size);
if (!dev_priv->regs) {
DRM_ERROR("failed to map registers\n");
ret = -EIO;
goto free_priv;
}
#ifdef CONFIG_HIGHMEM64G
/* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
@ -863,7 +1068,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
if (!I915_NEED_GFX_HWS(dev)) {
ret = i915_init_phys_hws(dev);
if (ret != 0)
return ret;
goto out_rmmap;
}
/* On the 945G/GM, the chipset reports the MSI capability on the
@ -883,6 +1088,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
intel_opregion_init(dev);
spin_lock_init(&dev_priv->user_irq_lock);
dev_priv->user_irq_refcount = 0;
ret = drm_vblank_init(dev, I915_NUM_PIPE);
@ -891,6 +1097,20 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
return ret;
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
ret = i915_load_modeset_init(dev);
if (ret < 0) {
DRM_ERROR("failed to init modeset\n");
goto out_rmmap;
}
}
return 0;
out_rmmap:
iounmap(dev_priv->regs);
free_priv:
drm_free(dev_priv, sizeof(struct drm_i915_private), DRM_MEM_DRIVER);
return ret;
}
@ -898,16 +1118,29 @@ int i915_driver_unload(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
io_mapping_free(dev_priv->mm.gtt_mapping);
drm_irq_uninstall(dev);
}
if (dev->pdev->msi_enabled)
pci_disable_msi(dev->pdev);
i915_free_hws(dev);
if (dev_priv->regs != NULL)
iounmap(dev_priv->regs);
intel_opregion_free(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_modeset_cleanup(dev);
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
drm_mm_takedown(&dev_priv->vram);
i915_gem_lastclose(dev);
}
drm_free(dev->dev_private, sizeof(drm_i915_private_t),
DRM_MEM_DRIVER);
@ -933,12 +1166,26 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv)
return 0;
}
/**
* i915_driver_lastclose - clean up after all DRM clients have exited
* @dev: DRM device
*
* Take care of cleaning up after all DRM clients have exited. In the
* mode setting case, we want to restore the kernel's initial mode (just
* in case the last client left us in a bad state).
*
* Additionally, in the non-mode setting case, we'll tear down the AGP
* and DMA structures, since the kernel won't be using them, and clea
* up any GEM state.
*/
void i915_driver_lastclose(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (!dev_priv)
if (!dev_priv || drm_core_check_feature(dev, DRIVER_MODESET)) {
intelfb_restore();
return;
}
i915_gem_lastclose(dev);
@ -951,7 +1198,8 @@ void i915_driver_lastclose(struct drm_device * dev)
void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
i915_mem_release(dev, file_priv, dev_priv->agp_heap);
if (!drm_core_check_feature(dev, DRIVER_MODESET))
i915_mem_release(dev, file_priv, dev_priv->agp_heap);
}
void i915_driver_postclose(struct drm_device *dev, struct drm_file *file_priv)

View File

@ -33,11 +33,22 @@
#include "i915_drv.h"
#include "drm_pciids.h"
#include <linux/console.h>
unsigned int i915_modeset = -1;
module_param_named(modeset, i915_modeset, int, 0400);
unsigned int i915_fbpercrtc = 0;
module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
static struct pci_device_id pciidlist[] = {
i915_PCI_IDS
};
#if defined(CONFIG_DRM_I915_KMS)
MODULE_DEVICE_TABLE(pci, pciidlist);
#endif
static int i915_suspend(struct drm_device *dev, pm_message_t state)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@ -148,6 +159,28 @@ static struct drm_driver driver = {
static int __init i915_init(void)
{
driver.num_ioctls = i915_max_ioctl;
/*
* If CONFIG_DRM_I915_KMS is set, default to KMS unless
* explicitly disabled with the module pararmeter.
*
* Otherwise, just follow the parameter (defaulting to off).
*
* Allow optional vga_text_mode_force boot option to override
* the default behavior.
*/
#if defined(CONFIG_DRM_I915_KMS)
if (i915_modeset != 0)
driver.driver_features |= DRIVER_MODESET;
#endif
if (i915_modeset == 1)
driver.driver_features |= DRIVER_MODESET;
#ifdef CONFIG_VGA_CONSOLE
if (vgacon_text_force() && i915_modeset == -1)
driver.driver_features &= ~DRIVER_MODESET;
#endif
return drm_init(&driver);
}

View File

@ -31,6 +31,7 @@
#define _I915_DRV_H_
#include "i915_reg.h"
#include "intel_bios.h"
#include <linux/io-mapping.h>
/* General customization:
@ -152,8 +153,26 @@ typedef struct drm_i915_private {
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
int vblank_pipe;
bool cursor_needs_physical;
struct drm_mm vram;
int irq_enabled;
struct intel_opregion opregion;
/* LVDS info */
int backlight_duty_cycle; /* restore backlight to this value */
bool panel_wants_dither;
struct drm_display_mode *panel_fixed_mode;
struct drm_display_mode *vbt_mode; /* if any */
/* Feature bits from the VBIOS */
int int_tv_support:1;
int lvds_dither:1;
int lvds_vbt:1;
int int_crt_support:1;
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
@ -413,6 +432,10 @@ struct drm_i915_gem_object {
* flags which individual pages are valid.
*/
uint8_t *page_cpu_valid;
/** User space pin count and filp owning the pin */
uint32_t user_pin_count;
struct drm_file *pin_filp;
};
/**
@ -442,8 +465,16 @@ struct drm_i915_file_private {
} mm;
};
enum intel_chip_family {
CHIP_I8XX = 0x01,
CHIP_I9XX = 0x02,
CHIP_I915 = 0x04,
CHIP_I965 = 0x08,
};
extern struct drm_ioctl_desc i915_ioctls[];
extern int i915_max_ioctl;
extern unsigned int i915_fbpercrtc;
extern int i915_master_create(struct drm_device *dev, struct drm_master *master);
extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master);
@ -472,6 +503,7 @@ extern int i915_irq_wait(struct drm_device *dev, void *data,
struct drm_file *file_priv);
void i915_user_irq_get(struct drm_device *dev);
void i915_user_irq_put(struct drm_device *dev);
extern void i915_enable_interrupt (struct drm_device *dev);
extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
extern void i915_driver_irq_preinstall(struct drm_device * dev);
@ -556,7 +588,16 @@ uint32_t i915_get_gem_seqno(struct drm_device *dev);
void i915_gem_retire_requests(struct drm_device *dev);
void i915_gem_retire_work_handler(struct work_struct *work);
void i915_gem_clflush_object(struct drm_gem_object *obj);
int i915_gem_object_set_domain(struct drm_gem_object *obj,
uint32_t read_domains,
uint32_t write_domain);
int i915_gem_init_ringbuffer(struct drm_device *dev);
void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
int i915_gem_do_init(struct drm_device *dev, unsigned long start,
unsigned long end);
int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
int write);
/* i915_gem_tiling.c */
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
@ -595,6 +636,10 @@ static inline void opregion_asle_intr(struct drm_device *dev) { return; }
static inline void opregion_enable_asle(struct drm_device *dev) { return; }
#endif
/* modesetting */
extern void intel_modeset_init(struct drm_device *dev);
extern void intel_modeset_cleanup(struct drm_device *dev);
/**
* Lock test for when it's just for synchronization of ring access.
*

View File

@ -30,6 +30,7 @@
#include "i915_drm.h"
#include "i915_drv.h"
#include <linux/swap.h>
#include <linux/pci.h>
#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
@ -40,8 +41,6 @@ i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
int write);
static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
int write);
static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
@ -57,33 +56,37 @@ static void i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
static void i915_gem_clear_fence_reg(struct drm_gem_object *obj);
static int i915_gem_evict_something(struct drm_device *dev);
static void
i915_gem_cleanup_ringbuffer(struct drm_device *dev);
int i915_gem_do_init(struct drm_device *dev, unsigned long start,
unsigned long end)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (start >= end ||
(start & (PAGE_SIZE - 1)) != 0 ||
(end & (PAGE_SIZE - 1)) != 0) {
return -EINVAL;
}
drm_mm_init(&dev_priv->mm.gtt_space, start,
end - start);
dev->gtt_total = (uint32_t) (end - start);
return 0;
}
int
i915_gem_init_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_init *args = data;
int ret;
mutex_lock(&dev->struct_mutex);
if (args->gtt_start >= args->gtt_end ||
(args->gtt_start & (PAGE_SIZE - 1)) != 0 ||
(args->gtt_end & (PAGE_SIZE - 1)) != 0) {
mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
drm_mm_init(&dev_priv->mm.gtt_space, args->gtt_start,
args->gtt_end - args->gtt_start);
dev->gtt_total = (uint32_t) (args->gtt_end - args->gtt_start);
ret = i915_gem_do_init(dev, args->gtt_start, args->gtt_end);
mutex_unlock(&dev->struct_mutex);
return 0;
return ret;
}
int
@ -1246,7 +1249,8 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
/* blow away mappings if mapped through GTT */
offset = ((loff_t) obj->map_list.hash.key) << PAGE_SHIFT;
unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1);
if (dev->dev_mapping)
unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1);
if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
i915_gem_clear_fence_reg(obj);
@ -1508,7 +1512,7 @@ static void
i915_gem_object_get_fence_reg(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
struct drm_i915_fence_reg *reg = NULL;
int i, ret;
@ -1567,8 +1571,9 @@ try_again:
* for this object next time we need it.
*/
offset = ((loff_t) reg->obj->map_list.hash.key) << PAGE_SHIFT;
unmap_mapping_range(dev->dev_mapping, offset,
reg->obj->size, 1);
if (dev->dev_mapping)
unmap_mapping_range(dev->dev_mapping, offset,
reg->obj->size, 1);
old_obj_priv->fence_reg = I915_FENCE_REG_NONE;
}
@ -1594,7 +1599,7 @@ static void
i915_gem_clear_fence_reg(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
if (IS_I965G(dev))
@ -1764,7 +1769,7 @@ i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj)
* This function returns when the move is complete, including waiting on
* flushes to occur.
*/
static int
int
i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
@ -2706,11 +2711,22 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data,
}
obj_priv = obj->driver_private;
ret = i915_gem_object_pin(obj, args->alignment);
if (ret != 0) {
drm_gem_object_unreference(obj);
if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) {
DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n",
args->handle);
mutex_unlock(&dev->struct_mutex);
return ret;
return -EINVAL;
}
obj_priv->user_pin_count++;
obj_priv->pin_filp = file_priv;
if (obj_priv->user_pin_count == 1) {
ret = i915_gem_object_pin(obj, args->alignment);
if (ret != 0) {
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return ret;
}
}
/* XXX - flush the CPU caches for pinned objects
@ -2730,6 +2746,7 @@ i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
{
struct drm_i915_gem_pin *args = data;
struct drm_gem_object *obj;
struct drm_i915_gem_object *obj_priv;
mutex_lock(&dev->struct_mutex);
@ -2741,7 +2758,19 @@ i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
return -EBADF;
}
i915_gem_object_unpin(obj);
obj_priv = obj->driver_private;
if (obj_priv->pin_filp != file_priv) {
DRM_ERROR("Not pinned by caller in i915_gem_pin_ioctl(): %d\n",
args->handle);
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
obj_priv->user_pin_count--;
if (obj_priv->user_pin_count == 0) {
obj_priv->pin_filp = NULL;
i915_gem_object_unpin(obj);
}
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
@ -3036,12 +3065,13 @@ i915_gem_init_hws(struct drm_device *dev)
return 0;
}
static int
int
i915_gem_init_ringbuffer(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_gem_object *obj;
struct drm_i915_gem_object *obj_priv;
drm_i915_ring_buffer_t *ring = &dev_priv->ring;
int ret;
u32 head;
@ -3063,24 +3093,24 @@ i915_gem_init_ringbuffer(struct drm_device *dev)
}
/* Set up the kernel mapping for the ring. */
dev_priv->ring.Size = obj->size;
dev_priv->ring.tail_mask = obj->size - 1;
ring->Size = obj->size;
ring->tail_mask = obj->size - 1;
dev_priv->ring.map.offset = dev->agp->base + obj_priv->gtt_offset;
dev_priv->ring.map.size = obj->size;
dev_priv->ring.map.type = 0;
dev_priv->ring.map.flags = 0;
dev_priv->ring.map.mtrr = 0;
ring->map.offset = dev->agp->base + obj_priv->gtt_offset;
ring->map.size = obj->size;
ring->map.type = 0;
ring->map.flags = 0;
ring->map.mtrr = 0;
drm_core_ioremap_wc(&dev_priv->ring.map, dev);
if (dev_priv->ring.map.handle == NULL) {
drm_core_ioremap_wc(&ring->map, dev);
if (ring->map.handle == NULL) {
DRM_ERROR("Failed to map ringbuffer.\n");
memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
drm_gem_object_unreference(obj);
return -EINVAL;
}
dev_priv->ring.ring_obj = obj;
dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
ring->ring_obj = obj;
ring->virtual_start = ring->map.handle;
/* Stop the ring if it's running. */
I915_WRITE(PRB0_CTL, 0);
@ -3128,12 +3158,20 @@ i915_gem_init_ringbuffer(struct drm_device *dev)
}
/* Update our cache of the ring state */
i915_kernel_lost_context(dev);
if (!drm_core_check_feature(dev, DRIVER_MODESET))
i915_kernel_lost_context(dev);
else {
ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
ring->space = ring->head - (ring->tail + 8);
if (ring->space < 0)
ring->space += ring->Size;
}
return 0;
}
static void
void
i915_gem_cleanup_ringbuffer(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
@ -3171,6 +3209,9 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return 0;
if (dev_priv->mm.wedged) {
DRM_ERROR("Reenabling wedged hardware, good luck\n");
dev_priv->mm.wedged = 0;
@ -3204,6 +3245,9 @@ i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
drm_i915_private_t *dev_priv = dev->dev_private;
int ret;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return 0;
ret = i915_gem_idle(dev);
drm_irq_uninstall(dev);

View File

@ -30,6 +30,7 @@
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "intel_drv.h"
#define MAX_NOPID ((u32)~0)
@ -51,6 +52,15 @@
#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
I915_INTERRUPT_ENABLE_VAR)
#define I915_PIPE_VBLANK_STATUS (PIPE_START_VBLANK_INTERRUPT_STATUS |\
PIPE_VBLANK_INTERRUPT_STATUS)
#define I915_PIPE_VBLANK_ENABLE (PIPE_START_VBLANK_INTERRUPT_ENABLE |\
PIPE_VBLANK_INTERRUPT_ENABLE)
#define DRM_I915_VBLANK_PIPE_ALL (DRM_I915_VBLANK_PIPE_A | \
DRM_I915_VBLANK_PIPE_B)
void
i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
{
@ -201,6 +211,7 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
pipea_stats = I915_READ(PIPEASTAT);
pipeb_stats = I915_READ(PIPEBSTAT);
/*
* Clear the PIPE(A|B)STAT regs before the IIR
*/
@ -427,6 +438,14 @@ void i915_disable_vblank(struct drm_device *dev, int pipe)
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
void i915_enable_interrupt (struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
opregion_enable_asle(dev);
dev_priv->irq_enabled = 1;
}
/* Set the vblank monitor pipe
*/
int i915_vblank_pipe_set(struct drm_device *dev, void *data,
@ -487,6 +506,8 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
atomic_set(&dev_priv->irq_received, 0);
I915_WRITE(HWSTAM, 0xeffe);
I915_WRITE(PIPEASTAT, 0);
I915_WRITE(PIPEBSTAT, 0);

View File

@ -0,0 +1,193 @@
/*
* Copyright © 2006 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*
*/
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "intel_bios.h"
static void *
find_section(struct bdb_header *bdb, int section_id)
{
u8 *base = (u8 *)bdb;
int index = 0;
u16 total, current_size;
u8 current_id;
/* skip to first section */
index += bdb->header_size;
total = bdb->bdb_size;
/* walk the sections looking for section_id */
while (index < total) {
current_id = *(base + index);
index++;
current_size = *((u16 *)(base + index));
index += 2;
if (current_id == section_id)
return base + index;
index += current_size;
}
return NULL;
}
/* Try to find panel data */
static void
parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
{
struct bdb_lvds_options *lvds_options;
struct bdb_lvds_lfp_data *lvds_lfp_data;
struct bdb_lvds_lfp_data_entry *entry;
struct lvds_dvo_timing *dvo_timing;
struct drm_display_mode *panel_fixed_mode;
/* Defaults if we can't find VBT info */
dev_priv->lvds_dither = 0;
dev_priv->lvds_vbt = 0;
lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
if (!lvds_options)
return;
dev_priv->lvds_dither = lvds_options->pixel_dither;
if (lvds_options->panel_type == 0xff)
return;
lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
if (!lvds_lfp_data)
return;
dev_priv->lvds_vbt = 1;
entry = &lvds_lfp_data->data[lvds_options->panel_type];
dvo_timing = &entry->dvo_timing;
panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode),
DRM_MEM_DRIVER);
panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
dvo_timing->hactive_lo;
panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
dvo_timing->hsync_pulse_width;
panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
dvo_timing->vactive_lo;
panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
dvo_timing->vsync_off;
panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
dvo_timing->vsync_pulse_width;
panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
panel_fixed_mode->clock = dvo_timing->clock * 10;
panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
drm_mode_set_name(panel_fixed_mode);
dev_priv->vbt_mode = panel_fixed_mode;
DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
drm_mode_debug_printmodeline(panel_fixed_mode);
return;
}
static void
parse_general_features(struct drm_i915_private *dev_priv,
struct bdb_header *bdb)
{
struct bdb_general_features *general;
/* Set sensible defaults in case we can't find the general block */
dev_priv->int_tv_support = 1;
dev_priv->int_crt_support = 1;
general = find_section(bdb, BDB_GENERAL_FEATURES);
if (general) {
dev_priv->int_tv_support = general->int_tv_support;
dev_priv->int_crt_support = general->int_crt_support;
}
}
/**
* intel_init_bios - initialize VBIOS settings & find VBT
* @dev: DRM device
*
* Loads the Video BIOS and checks that the VBT exists. Sets scratch registers
* to appropriate values.
*
* VBT existence is a sanity check that is relied on by other i830_bios.c code.
* Note that it would be better to use a BIOS call to get the VBT, as BIOSes may
* feed an updated VBT back through that, compared to what we'll fetch using
* this method of groping around in the BIOS data.
*
* Returns 0 on success, nonzero on failure.
*/
bool
intel_init_bios(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct pci_dev *pdev = dev->pdev;
struct vbt_header *vbt = NULL;
struct bdb_header *bdb;
u8 __iomem *bios;
size_t size;
int i;
bios = pci_map_rom(pdev, &size);
if (!bios)
return -1;
/* Scour memory looking for the VBT signature */
for (i = 0; i + 4 < size; i++) {
if (!memcmp(bios + i, "$VBT", 4)) {
vbt = (struct vbt_header *)(bios + i);
break;
}
}
if (!vbt) {
DRM_ERROR("VBT signature missing\n");
pci_unmap_rom(pdev, bios);
return -1;
}
bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset);
/* Grab useful general definitions */
parse_general_features(dev_priv, bdb);
parse_panel_data(dev_priv, bdb);
pci_unmap_rom(pdev, bios);
return 0;
}

View File

@ -0,0 +1,405 @@
/*
* Copyright © 2006 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*
*/
#ifndef _I830_BIOS_H_
#define _I830_BIOS_H_
#include "drmP.h"
struct vbt_header {
u8 signature[20]; /**< Always starts with 'VBT$' */
u16 version; /**< decimal */
u16 header_size; /**< in bytes */
u16 vbt_size; /**< in bytes */
u8 vbt_checksum;
u8 reserved0;
u32 bdb_offset; /**< from beginning of VBT */
u32 aim_offset[4]; /**< from beginning of VBT */
} __attribute__((packed));
struct bdb_header {
u8 signature[16]; /**< Always 'BIOS_DATA_BLOCK' */
u16 version; /**< decimal */
u16 header_size; /**< in bytes */
u16 bdb_size; /**< in bytes */
};
/* strictly speaking, this is a "skip" block, but it has interesting info */
struct vbios_data {
u8 type; /* 0 == desktop, 1 == mobile */
u8 relstage;
u8 chipset;
u8 lvds_present:1;
u8 tv_present:1;
u8 rsvd2:6; /* finish byte */
u8 rsvd3[4];
u8 signon[155];
u8 copyright[61];
u16 code_segment;
u8 dos_boot_mode;
u8 bandwidth_percent;
u8 rsvd4; /* popup memory size */
u8 resize_pci_bios;
u8 rsvd5; /* is crt already on ddc2 */
} __attribute__((packed));
/*
* There are several types of BIOS data blocks (BDBs), each block has
* an ID and size in the first 3 bytes (ID in first, size in next 2).
* Known types are listed below.
*/
#define BDB_GENERAL_FEATURES 1
#define BDB_GENERAL_DEFINITIONS 2
#define BDB_OLD_TOGGLE_LIST 3
#define BDB_MODE_SUPPORT_LIST 4
#define BDB_GENERIC_MODE_TABLE 5
#define BDB_EXT_MMIO_REGS 6
#define BDB_SWF_IO 7
#define BDB_SWF_MMIO 8
#define BDB_DOT_CLOCK_TABLE 9
#define BDB_MODE_REMOVAL_TABLE 10
#define BDB_CHILD_DEVICE_TABLE 11
#define BDB_DRIVER_FEATURES 12
#define BDB_DRIVER_PERSISTENCE 13
#define BDB_EXT_TABLE_PTRS 14
#define BDB_DOT_CLOCK_OVERRIDE 15
#define BDB_DISPLAY_SELECT 16
/* 17 rsvd */
#define BDB_DRIVER_ROTATION 18
#define BDB_DISPLAY_REMOVE 19
#define BDB_OEM_CUSTOM 20
#define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */
#define BDB_SDVO_LVDS_OPTIONS 22
#define BDB_SDVO_PANEL_DTDS 23
#define BDB_SDVO_LVDS_PNP_IDS 24
#define BDB_SDVO_LVDS_POWER_SEQ 25
#define BDB_TV_OPTIONS 26
#define BDB_LVDS_OPTIONS 40
#define BDB_LVDS_LFP_DATA_PTRS 41
#define BDB_LVDS_LFP_DATA 42
#define BDB_LVDS_BACKLIGHT 43
#define BDB_LVDS_POWER 44
#define BDB_SKIP 254 /* VBIOS private block, ignore */
struct bdb_general_features {
/* bits 1 */
u8 panel_fitting:2;
u8 flexaim:1;
u8 msg_enable:1;
u8 clear_screen:3;
u8 color_flip:1;
/* bits 2 */
u8 download_ext_vbt:1;
u8 enable_ssc:1;
u8 ssc_freq:1;
u8 enable_lfp_on_override:1;
u8 disable_ssc_ddt:1;
u8 rsvd8:3; /* finish byte */
/* bits 3 */
u8 disable_smooth_vision:1;
u8 single_dvi:1;
u8 rsvd9:6; /* finish byte */
/* bits 4 */
u8 legacy_monitor_detect;
/* bits 5 */
u8 int_crt_support:1;
u8 int_tv_support:1;
u8 rsvd11:6; /* finish byte */
} __attribute__((packed));
struct bdb_general_definitions {
/* DDC GPIO */
u8 crt_ddc_gmbus_pin;
/* DPMS bits */
u8 dpms_acpi:1;
u8 skip_boot_crt_detect:1;
u8 dpms_aim:1;
u8 rsvd1:5; /* finish byte */
/* boot device bits */
u8 boot_display[2];
u8 child_dev_size;
/* device info */
u8 tv_or_lvds_info[33];
u8 dev1[33];
u8 dev2[33];
u8 dev3[33];
u8 dev4[33];
/* may be another device block here on some platforms */
};
struct bdb_lvds_options {
u8 panel_type;
u8 rsvd1;
/* LVDS capabilities, stored in a dword */
u8 rsvd2:1;
u8 lvds_edid:1;
u8 pixel_dither:1;
u8 pfit_ratio_auto:1;
u8 pfit_gfx_mode_enhanced:1;
u8 pfit_text_mode_enhanced:1;
u8 pfit_mode:2;
u8 rsvd4;
} __attribute__((packed));
/* LFP pointer table contains entries to the struct below */
struct bdb_lvds_lfp_data_ptr {
u16 fp_timing_offset; /* offsets are from start of bdb */
u8 fp_table_size;
u16 dvo_timing_offset;
u8 dvo_table_size;
u16 panel_pnp_id_offset;
u8 pnp_table_size;
} __attribute__((packed));
struct bdb_lvds_lfp_data_ptrs {
u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */
struct bdb_lvds_lfp_data_ptr ptr[16];
} __attribute__((packed));
/* LFP data has 3 blocks per entry */
struct lvds_fp_timing {
u16 x_res;
u16 y_res;
u32 lvds_reg;
u32 lvds_reg_val;
u32 pp_on_reg;
u32 pp_on_reg_val;
u32 pp_off_reg;
u32 pp_off_reg_val;
u32 pp_cycle_reg;
u32 pp_cycle_reg_val;
u32 pfit_reg;
u32 pfit_reg_val;
u16 terminator;
} __attribute__((packed));
struct lvds_dvo_timing {
u16 clock; /**< In 10khz */
u8 hactive_lo;
u8 hblank_lo;
u8 hblank_hi:4;
u8 hactive_hi:4;
u8 vactive_lo;
u8 vblank_lo;
u8 vblank_hi:4;
u8 vactive_hi:4;
u8 hsync_off_lo;
u8 hsync_pulse_width;
u8 vsync_pulse_width:4;
u8 vsync_off:4;
u8 rsvd0:6;
u8 hsync_off_hi:2;
u8 h_image;
u8 v_image;
u8 max_hv;
u8 h_border;
u8 v_border;
u8 rsvd1:3;
u8 digital:2;
u8 vsync_positive:1;
u8 hsync_positive:1;
u8 rsvd2:1;
} __attribute__((packed));
struct lvds_pnp_id {
u16 mfg_name;
u16 product_code;
u32 serial;
u8 mfg_week;
u8 mfg_year;
} __attribute__((packed));
struct bdb_lvds_lfp_data_entry {
struct lvds_fp_timing fp_timing;
struct lvds_dvo_timing dvo_timing;
struct lvds_pnp_id pnp_id;
} __attribute__((packed));
struct bdb_lvds_lfp_data {
struct bdb_lvds_lfp_data_entry data[16];
} __attribute__((packed));
struct aimdb_header {
char signature[16];
char oem_device[20];
u16 aimdb_version;
u16 aimdb_header_size;
u16 aimdb_size;
} __attribute__((packed));
struct aimdb_block {
u8 aimdb_id;
u16 aimdb_size;
} __attribute__((packed));
struct vch_panel_data {
u16 fp_timing_offset;
u8 fp_timing_size;
u16 dvo_timing_offset;
u8 dvo_timing_size;
u16 text_fitting_offset;
u8 text_fitting_size;
u16 graphics_fitting_offset;
u8 graphics_fitting_size;
} __attribute__((packed));
struct vch_bdb_22 {
struct aimdb_block aimdb_block;
struct vch_panel_data panels[16];
} __attribute__((packed));
bool intel_init_bios(struct drm_device *dev);
/*
* Driver<->VBIOS interaction occurs through scratch bits in
* GR18 & SWF*.
*/
/* GR18 bits are set on display switch and hotkey events */
#define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */
#define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */
#define GR18_HK_NONE (0x0<<3)
#define GR18_HK_LFP_STRETCH (0x1<<3)
#define GR18_HK_TOGGLE_DISP (0x2<<3)
#define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */
#define GR18_HK_POPUP_DISABLED (0x6<<3)
#define GR18_HK_POPUP_ENABLED (0x7<<3)
#define GR18_HK_PFIT (0x8<<3)
#define GR18_HK_APM_CHANGE (0xa<<3)
#define GR18_HK_MULTIPLE (0xc<<3)
#define GR18_USER_INT_EN (1<<2)
#define GR18_A0000_FLUSH_EN (1<<1)
#define GR18_SMM_EN (1<<0)
/* Set by driver, cleared by VBIOS */
#define SWF00_YRES_SHIFT 16
#define SWF00_XRES_SHIFT 0
#define SWF00_RES_MASK 0xffff
/* Set by VBIOS at boot time and driver at runtime */
#define SWF01_TV2_FORMAT_SHIFT 8
#define SWF01_TV1_FORMAT_SHIFT 0
#define SWF01_TV_FORMAT_MASK 0xffff
#define SWF10_VBIOS_BLC_I2C_EN (1<<29)
#define SWF10_GTT_OVERRIDE_EN (1<<28)
#define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */
#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
#define SWF10_OLD_TOGGLE 0x0
#define SWF10_TOGGLE_LIST_1 0x1
#define SWF10_TOGGLE_LIST_2 0x2
#define SWF10_TOGGLE_LIST_3 0x3
#define SWF10_TOGGLE_LIST_4 0x4
#define SWF10_PANNING_EN (1<<23)
#define SWF10_DRIVER_LOADED (1<<22)
#define SWF10_EXTENDED_DESKTOP (1<<21)
#define SWF10_EXCLUSIVE_MODE (1<<20)
#define SWF10_OVERLAY_EN (1<<19)
#define SWF10_PLANEB_HOLDOFF (1<<18)
#define SWF10_PLANEA_HOLDOFF (1<<17)
#define SWF10_VGA_HOLDOFF (1<<16)
#define SWF10_ACTIVE_DISP_MASK 0xffff
#define SWF10_PIPEB_LFP2 (1<<15)
#define SWF10_PIPEB_EFP2 (1<<14)
#define SWF10_PIPEB_TV2 (1<<13)
#define SWF10_PIPEB_CRT2 (1<<12)
#define SWF10_PIPEB_LFP (1<<11)
#define SWF10_PIPEB_EFP (1<<10)
#define SWF10_PIPEB_TV (1<<9)
#define SWF10_PIPEB_CRT (1<<8)
#define SWF10_PIPEA_LFP2 (1<<7)
#define SWF10_PIPEA_EFP2 (1<<6)
#define SWF10_PIPEA_TV2 (1<<5)
#define SWF10_PIPEA_CRT2 (1<<4)
#define SWF10_PIPEA_LFP (1<<3)
#define SWF10_PIPEA_EFP (1<<2)
#define SWF10_PIPEA_TV (1<<1)
#define SWF10_PIPEA_CRT (1<<0)
#define SWF11_MEMORY_SIZE_SHIFT 16
#define SWF11_SV_TEST_EN (1<<15)
#define SWF11_IS_AGP (1<<14)
#define SWF11_DISPLAY_HOLDOFF (1<<13)
#define SWF11_DPMS_REDUCED (1<<12)
#define SWF11_IS_VBE_MODE (1<<11)
#define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */
#define SWF11_DPMS_MASK 0x07
#define SWF11_DPMS_OFF (1<<2)
#define SWF11_DPMS_SUSPEND (1<<1)
#define SWF11_DPMS_STANDBY (1<<0)
#define SWF11_DPMS_ON 0
#define SWF14_GFX_PFIT_EN (1<<31)
#define SWF14_TEXT_PFIT_EN (1<<30)
#define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */
#define SWF14_POPUP_EN (1<<28)
#define SWF14_DISPLAY_HOLDOFF (1<<27)
#define SWF14_DISP_DETECT_EN (1<<26)
#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
#define SWF14_DRIVER_STATUS (1<<24)
#define SWF14_OS_TYPE_WIN9X (1<<23)
#define SWF14_OS_TYPE_WINNT (1<<22)
/* 21:19 rsvd */
#define SWF14_PM_TYPE_MASK 0x00070000
#define SWF14_PM_ACPI_VIDEO (0x4 << 16)
#define SWF14_PM_ACPI (0x3 << 16)
#define SWF14_PM_APM_12 (0x2 << 16)
#define SWF14_PM_APM_11 (0x1 << 16)
#define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */
/* if GR18 indicates a display switch */
#define SWF14_DS_PIPEB_LFP2_EN (1<<15)
#define SWF14_DS_PIPEB_EFP2_EN (1<<14)
#define SWF14_DS_PIPEB_TV2_EN (1<<13)
#define SWF14_DS_PIPEB_CRT2_EN (1<<12)
#define SWF14_DS_PIPEB_LFP_EN (1<<11)
#define SWF14_DS_PIPEB_EFP_EN (1<<10)
#define SWF14_DS_PIPEB_TV_EN (1<<9)
#define SWF14_DS_PIPEB_CRT_EN (1<<8)
#define SWF14_DS_PIPEA_LFP2_EN (1<<7)
#define SWF14_DS_PIPEA_EFP2_EN (1<<6)
#define SWF14_DS_PIPEA_TV2_EN (1<<5)
#define SWF14_DS_PIPEA_CRT2_EN (1<<4)
#define SWF14_DS_PIPEA_LFP_EN (1<<3)
#define SWF14_DS_PIPEA_EFP_EN (1<<2)
#define SWF14_DS_PIPEA_TV_EN (1<<1)
#define SWF14_DS_PIPEA_CRT_EN (1<<0)
/* if GR18 indicates a panel fitting request */
#define SWF14_PFIT_EN (1<<0) /* 0 means disable */
/* if GR18 indicates an APM change request */
#define SWF14_APM_HIBERNATE 0x4
#define SWF14_APM_SUSPEND 0x3
#define SWF14_APM_STANDBY 0x1
#define SWF14_APM_RESTORE 0x0
#endif /* _I830_BIOS_H_ */

View File

@ -0,0 +1,284 @@
/*
* Copyright © 2006-2007 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*/
#include <linux/i2c.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 temp;
temp = I915_READ(ADPA);
temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
temp &= ~ADPA_DAC_ENABLE;
switch(mode) {
case DRM_MODE_DPMS_ON:
temp |= ADPA_DAC_ENABLE;
break;
case DRM_MODE_DPMS_STANDBY:
temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
break;
case DRM_MODE_DPMS_SUSPEND:
temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
break;
case DRM_MODE_DPMS_OFF:
temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
break;
}
I915_WRITE(ADPA, temp);
}
static int intel_crt_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
if (mode->clock > 400000 || mode->clock < 25000)
return MODE_CLOCK_RANGE;
return MODE_OK;
}
static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
return true;
}
static void intel_crt_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct drm_i915_private *dev_priv = dev->dev_private;
int dpll_md_reg;
u32 adpa, dpll_md;
if (intel_crtc->pipe == 0)
dpll_md_reg = DPLL_A_MD;
else
dpll_md_reg = DPLL_B_MD;
/*
* Disable separate mode multiplier used when cloning SDVO to CRT
* XXX this needs to be adjusted when we really are cloning
*/
if (IS_I965G(dev)) {
dpll_md = I915_READ(dpll_md_reg);
I915_WRITE(dpll_md_reg,
dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
}
adpa = 0;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
adpa |= ADPA_HSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
adpa |= ADPA_VSYNC_ACTIVE_HIGH;
if (intel_crtc->pipe == 0)
adpa |= ADPA_PIPE_A_SELECT;
else
adpa |= ADPA_PIPE_B_SELECT;
I915_WRITE(ADPA, adpa);
}
/**
* Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
*
* Not for i915G/i915GM
*
* \return true if CRT is connected.
* \return false if CRT is disconnected.
*/
static bool intel_crt_detect_hotplug(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 temp;
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
temp = I915_READ(PORT_HOTPLUG_EN);
I915_WRITE(PORT_HOTPLUG_EN,
temp | CRT_HOTPLUG_FORCE_DETECT | (1 << 5));
do {
if (!(I915_READ(PORT_HOTPLUG_EN) & CRT_HOTPLUG_FORCE_DETECT))
break;
msleep(1);
} while (time_after(timeout, jiffies));
if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) ==
CRT_HOTPLUG_MONITOR_COLOR)
return true;
return false;
}
static bool intel_crt_detect_ddc(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
/* CRT should always be at 0, but check anyway */
if (intel_output->type != INTEL_OUTPUT_ANALOG)
return false;
return intel_ddc_probe(intel_output);
}
static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) {
if (intel_crt_detect_hotplug(connector))
return connector_status_connected;
else
return connector_status_disconnected;
}
if (intel_crt_detect_ddc(connector))
return connector_status_connected;
/* TODO use load detect */
return connector_status_unknown;
}
static void intel_crt_destroy(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
intel_i2c_destroy(intel_output->ddc_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
}
static int intel_crt_get_modes(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
return intel_ddc_get_modes(intel_output);
}
static int intel_crt_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t value)
{
struct drm_device *dev = connector->dev;
if (property == dev->mode_config.dpms_property && connector->encoder)
intel_crt_dpms(connector->encoder, (uint32_t)(value & 0xf));
return 0;
}
/*
* Routines for controlling stuff on the analog port
*/
static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
.dpms = intel_crt_dpms,
.mode_fixup = intel_crt_mode_fixup,
.prepare = intel_encoder_prepare,
.commit = intel_encoder_commit,
.mode_set = intel_crt_mode_set,
};
static const struct drm_connector_funcs intel_crt_connector_funcs = {
.detect = intel_crt_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = intel_crt_destroy,
.set_property = intel_crt_set_property,
};
static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
.mode_valid = intel_crt_mode_valid,
.get_modes = intel_crt_get_modes,
.best_encoder = intel_best_encoder,
};
void intel_crt_enc_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
}
static const struct drm_encoder_funcs intel_crt_enc_funcs = {
.destroy = intel_crt_enc_destroy,
};
void intel_crt_init(struct drm_device *dev)
{
struct drm_connector *connector;
struct intel_output *intel_output;
intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
if (!intel_output)
return;
connector = &intel_output->base;
drm_connector_init(dev, &intel_output->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs,
DRM_MODE_ENCODER_DAC);
drm_mode_connector_attach_encoder(&intel_output->base,
&intel_output->enc);
/* Set up the DDC bus. */
intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A");
if (!intel_output->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
"failed.\n");
return;
}
intel_output->type = INTEL_OUTPUT_ANALOG;
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);
}

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,146 @@
/*
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
* Copyright (c) 2007-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#ifndef __INTEL_DRV_H__
#define __INTEL_DRV_H__
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/i2c-algo-bit.h>
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
/*
* Display related stuff
*/
/* store information about an Ixxx DVO */
/* The i830->i865 use multiple DVOs with multiple i2cs */
/* the i915, i945 have a single sDVO i2c bus - which is different */
#define MAX_OUTPUTS 6
/* maximum connectors per crtcs in the mode set */
#define INTELFB_CONN_LIMIT 4
#define INTEL_I2C_BUS_DVO 1
#define INTEL_I2C_BUS_SDVO 2
/* these are outputs from the chip - integrated only
external chips are via DVO or SDVO output */
#define INTEL_OUTPUT_UNUSED 0
#define INTEL_OUTPUT_ANALOG 1
#define INTEL_OUTPUT_DVO 2
#define INTEL_OUTPUT_SDVO 3
#define INTEL_OUTPUT_LVDS 4
#define INTEL_OUTPUT_TVOUT 5
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
#define INTEL_DVO_CHIP_TMDS 2
#define INTEL_DVO_CHIP_TVOUT 4
struct intel_i2c_chan {
struct drm_device *drm_dev; /* for getting at dev. private (mmio etc.) */
u32 reg; /* GPIO reg */
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
u8 slave_addr;
};
struct intel_framebuffer {
struct drm_framebuffer base;
struct drm_gem_object *obj;
};
struct intel_output {
struct drm_connector base;
struct drm_encoder enc;
int type;
struct intel_i2c_chan *i2c_bus; /* for control functions */
struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */
bool load_detect_temp;
void *dev_priv;
};
struct intel_crtc {
struct drm_crtc base;
int pipe;
int plane;
uint32_t cursor_addr;
u8 lut_r[256], lut_g[256], lut_b[256];
int dpms_mode;
struct intel_framebuffer *fbdev_fb;
/* a mode_set for fbdev users on this crtc */
struct drm_mode_set mode_set;
};
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
#define to_intel_output(x) container_of(x, struct intel_output, base)
#define enc_to_intel_output(x) container_of(x, struct intel_output, enc)
#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
const char *name);
void intel_i2c_destroy(struct intel_i2c_chan *chan);
int intel_ddc_get_modes(struct intel_output *intel_output);
extern bool intel_ddc_probe(struct intel_output *intel_output);
extern void intel_crt_init(struct drm_device *dev);
extern void intel_sdvo_init(struct drm_device *dev, int output_device);
extern void intel_dvo_init(struct drm_device *dev);
extern void intel_tv_init(struct drm_device *dev);
extern void intel_lvds_init(struct drm_device *dev);
extern void intel_crtc_load_lut(struct drm_crtc *crtc);
extern void intel_encoder_prepare (struct drm_encoder *encoder);
extern void intel_encoder_commit (struct drm_encoder *encoder);
extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
struct drm_crtc *crtc);
extern void intel_wait_for_vblank(struct drm_device *dev);
extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
struct drm_display_mode *mode,
int *dpms_mode);
extern void intel_release_load_detect_pipe(struct intel_output *intel_output,
int dpms_mode);
extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB);
extern int intel_sdvo_supports_hotplug(struct drm_connector *connector);
extern void intel_sdvo_set_hotplug(struct drm_connector *connector, int enable);
extern int intelfb_probe(struct drm_device *dev);
extern int intelfb_remove(struct drm_device *dev, struct drm_framebuffer *fb);
extern int intelfb_resize(struct drm_device *dev, struct drm_crtc *crtc);
extern void intelfb_restore(void);
extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno);
extern int intel_framebuffer_create(struct drm_device *dev,
struct drm_mode_fb_cmd *mode_cmd,
struct drm_framebuffer **fb,
struct drm_gem_object *obj);
#endif /* __INTEL_DRV_H__ */

View File

@ -0,0 +1,501 @@
/*
* Copyright 2006 Dave Airlie <airlied@linux.ie>
* Copyright © 2006-2007 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*/
#include <linux/i2c.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "dvo.h"
#define SIL164_ADDR 0x38
#define CH7xxx_ADDR 0x76
#define TFP410_ADDR 0x38
extern struct intel_dvo_dev_ops sil164_ops;
extern struct intel_dvo_dev_ops ch7xxx_ops;
extern struct intel_dvo_dev_ops ivch_ops;
extern struct intel_dvo_dev_ops tfp410_ops;
extern struct intel_dvo_dev_ops ch7017_ops;
struct intel_dvo_device intel_dvo_devices[] = {
{
.type = INTEL_DVO_CHIP_TMDS,
.name = "sil164",
.dvo_reg = DVOC,
.slave_addr = SIL164_ADDR,
.dev_ops = &sil164_ops,
},
{
.type = INTEL_DVO_CHIP_TMDS,
.name = "ch7xxx",
.dvo_reg = DVOC,
.slave_addr = CH7xxx_ADDR,
.dev_ops = &ch7xxx_ops,
},
{
.type = INTEL_DVO_CHIP_LVDS,
.name = "ivch",
.dvo_reg = DVOA,
.slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
.dev_ops = &ivch_ops,
},
{
.type = INTEL_DVO_CHIP_TMDS,
.name = "tfp410",
.dvo_reg = DVOC,
.slave_addr = TFP410_ADDR,
.dev_ops = &tfp410_ops,
},
{
.type = INTEL_DVO_CHIP_LVDS,
.name = "ch7017",
.dvo_reg = DVOC,
.slave_addr = 0x75,
.gpio = GPIOE,
.dev_ops = &ch7017_ops,
}
};
static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
struct intel_output *intel_output = enc_to_intel_output(encoder);
struct intel_dvo_device *dvo = intel_output->dev_priv;
u32 dvo_reg = dvo->dvo_reg;
u32 temp = I915_READ(dvo_reg);
if (mode == DRM_MODE_DPMS_ON) {
I915_WRITE(dvo_reg, temp | DVO_ENABLE);
I915_READ(dvo_reg);
dvo->dev_ops->dpms(dvo, mode);
} else {
dvo->dev_ops->dpms(dvo, mode);
I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
I915_READ(dvo_reg);
}
}
static void intel_dvo_save(struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
struct intel_output *intel_output = to_intel_output(connector);
struct intel_dvo_device *dvo = intel_output->dev_priv;
/* Each output should probably just save the registers it touches,
* but for now, use more overkill.
*/
dev_priv->saveDVOA = I915_READ(DVOA);
dev_priv->saveDVOB = I915_READ(DVOB);
dev_priv->saveDVOC = I915_READ(DVOC);
dvo->dev_ops->save(dvo);
}
static void intel_dvo_restore(struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
struct intel_output *intel_output = to_intel_output(connector);
struct intel_dvo_device *dvo = intel_output->dev_priv;
dvo->dev_ops->restore(dvo);
I915_WRITE(DVOA, dev_priv->saveDVOA);
I915_WRITE(DVOB, dev_priv->saveDVOB);
I915_WRITE(DVOC, dev_priv->saveDVOC);
}
static int intel_dvo_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_dvo_device *dvo = intel_output->dev_priv;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
/* XXX: Validate clock range */
if (dvo->panel_fixed_mode) {
if (mode->hdisplay > dvo->panel_fixed_mode->hdisplay)
return MODE_PANEL;
if (mode->vdisplay > dvo->panel_fixed_mode->vdisplay)
return MODE_PANEL;
}
return dvo->dev_ops->mode_valid(dvo, mode);
}
static bool intel_dvo_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct intel_output *intel_output = enc_to_intel_output(encoder);
struct intel_dvo_device *dvo = intel_output->dev_priv;
/* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
* with the panel scaling set up to source from the H/VDisplay
* of the original mode.
*/
if (dvo->panel_fixed_mode != NULL) {
#define C(x) adjusted_mode->x = dvo->panel_fixed_mode->x
C(hdisplay);
C(hsync_start);
C(hsync_end);
C(htotal);
C(vdisplay);
C(vsync_start);
C(vsync_end);
C(vtotal);
C(clock);
drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
#undef C
}
if (dvo->dev_ops->mode_fixup)
return dvo->dev_ops->mode_fixup(dvo, mode, adjusted_mode);
return true;
}
static void intel_dvo_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct intel_output *intel_output = enc_to_intel_output(encoder);
struct intel_dvo_device *dvo = intel_output->dev_priv;
int pipe = intel_crtc->pipe;
u32 dvo_val;
u32 dvo_reg = dvo->dvo_reg, dvo_srcdim_reg;
int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
switch (dvo_reg) {
case DVOA:
default:
dvo_srcdim_reg = DVOA_SRCDIM;
break;
case DVOB:
dvo_srcdim_reg = DVOB_SRCDIM;
break;
case DVOC:
dvo_srcdim_reg = DVOC_SRCDIM;
break;
}
dvo->dev_ops->mode_set(dvo, mode, adjusted_mode);
/* Save the data order, since I don't know what it should be set to. */
dvo_val = I915_READ(dvo_reg) &
(DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG);
dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |
DVO_BLANK_ACTIVE_HIGH;
if (pipe == 1)
dvo_val |= DVO_PIPE_B_SELECT;
dvo_val |= DVO_PIPE_STALL;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
dvo_val |= DVO_HSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
I915_WRITE(dpll_reg, I915_READ(dpll_reg) | DPLL_DVO_HIGH_SPEED);
/*I915_WRITE(DVOB_SRCDIM,
(adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
(adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/
I915_WRITE(dvo_srcdim_reg,
(adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
(adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));
/*I915_WRITE(DVOB, dvo_val);*/
I915_WRITE(dvo_reg, dvo_val);
}
/**
* Detect the output connection on our DVO device.
*
* Unimplemented.
*/
static enum drm_connector_status intel_dvo_detect(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_dvo_device *dvo = intel_output->dev_priv;
return dvo->dev_ops->detect(dvo);
}
static int intel_dvo_get_modes(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_dvo_device *dvo = intel_output->dev_priv;
/* We should probably have an i2c driver get_modes function for those
* devices which will have a fixed set of modes determined by the chip
* (TV-out, for example), but for now with just TMDS and LVDS,
* that's not the case.
*/
intel_ddc_get_modes(intel_output);
if (!list_empty(&connector->probed_modes))
return 1;
if (dvo->panel_fixed_mode != NULL) {
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, dvo->panel_fixed_mode);
if (mode) {
drm_mode_probed_add(connector, mode);
return 1;
}
}
return 0;
}
static void intel_dvo_destroy (struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
struct intel_dvo_device *dvo = intel_output->dev_priv;
if (dvo) {
if (dvo->dev_ops->destroy)
dvo->dev_ops->destroy(dvo);
if (dvo->panel_fixed_mode)
kfree(dvo->panel_fixed_mode);
/* no need, in i830_dvoices[] now */
//kfree(dvo);
}
if (intel_output->i2c_bus)
intel_i2c_destroy(intel_output->i2c_bus);
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(intel_output);
}
#ifdef RANDR_GET_CRTC_INTERFACE
static struct drm_crtc *intel_dvo_get_crtc(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_output *intel_output = to_intel_output(connector);
struct intel_dvo_device *dvo = intel_output->dev_priv;
int pipe = !!(I915_READ(dvo->dvo_reg) & SDVO_PIPE_B_SELECT);
return intel_pipe_to_crtc(pScrn, pipe);
}
#endif
static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = {
.dpms = intel_dvo_dpms,
.mode_fixup = intel_dvo_mode_fixup,
.prepare = intel_encoder_prepare,
.mode_set = intel_dvo_mode_set,
.commit = intel_encoder_commit,
};
static const struct drm_connector_funcs intel_dvo_connector_funcs = {
.save = intel_dvo_save,
.restore = intel_dvo_restore,
.detect = intel_dvo_detect,
.destroy = intel_dvo_destroy,
.fill_modes = drm_helper_probe_single_connector_modes,
};
static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {
.mode_valid = intel_dvo_mode_valid,
.get_modes = intel_dvo_get_modes,
.best_encoder = intel_best_encoder,
};
void intel_dvo_enc_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
}
static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
.destroy = intel_dvo_enc_destroy,
};
/**
* Attempts to get a fixed panel timing for LVDS (currently only the i830).
*
* Other chips with DVO LVDS will need to extend this to deal with the LVDS
* chip being on DVOB/C and having multiple pipes.
*/
static struct drm_display_mode *
intel_dvo_get_current_mode (struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_output *intel_output = to_intel_output(connector);
struct intel_dvo_device *dvo = intel_output->dev_priv;
uint32_t dvo_reg = dvo->dvo_reg;
uint32_t dvo_val = I915_READ(dvo_reg);
struct drm_display_mode *mode = NULL;
/* If the DVO port is active, that'll be the LVDS, so we can pull out
* its timings to get how the BIOS set up the panel.
*/
if (dvo_val & DVO_ENABLE) {
struct drm_crtc *crtc;
int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
crtc = intel_get_crtc_from_pipe(dev, pipe);
if (crtc) {
mode = intel_crtc_mode_get(dev, crtc);
if (mode) {
mode->type |= DRM_MODE_TYPE_PREFERRED;
if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
mode->flags |= DRM_MODE_FLAG_PHSYNC;
if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)
mode->flags |= DRM_MODE_FLAG_PVSYNC;
}
}
}
return mode;
}
void intel_dvo_init(struct drm_device *dev)
{
struct intel_output *intel_output;
struct intel_dvo_device *dvo;
struct intel_i2c_chan *i2cbus = NULL;
int ret = 0;
int i;
int gpio_inited = 0;
int encoder_type = DRM_MODE_ENCODER_NONE;
intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL);
if (!intel_output)
return;
/* Set up the DDC bus */
intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "DVODDC_D");
if (!intel_output->ddc_bus)
goto free_intel;
/* Now, try to find a controller */
for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
struct drm_connector *connector = &intel_output->base;
int gpio;
dvo = &intel_dvo_devices[i];
/* Allow the I2C driver info to specify the GPIO to be used in
* special cases, but otherwise default to what's defined
* in the spec.
*/
if (dvo->gpio != 0)
gpio = dvo->gpio;
else if (dvo->type == INTEL_DVO_CHIP_LVDS)
gpio = GPIOB;
else
gpio = GPIOE;
/* Set up the I2C bus necessary for the chip we're probing.
* It appears that everything is on GPIOE except for panels
* on i830 laptops, which are on GPIOB (DVOA).
*/
if (gpio_inited != gpio) {
if (i2cbus != NULL)
intel_i2c_destroy(i2cbus);
if (!(i2cbus = intel_i2c_create(dev, gpio,
gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
continue;
}
gpio_inited = gpio;
}
if (dvo->dev_ops!= NULL)
ret = dvo->dev_ops->init(dvo, i2cbus);
else
ret = false;
if (!ret)
continue;
intel_output->type = INTEL_OUTPUT_DVO;
switch (dvo->type) {
case INTEL_DVO_CHIP_TMDS:
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_DVII);
encoder_type = DRM_MODE_ENCODER_TMDS;
break;
case INTEL_DVO_CHIP_LVDS:
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
encoder_type = DRM_MODE_ENCODER_LVDS;
break;
}
drm_connector_helper_add(connector,
&intel_dvo_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
intel_output->dev_priv = dvo;
intel_output->i2c_bus = i2cbus;
drm_encoder_init(dev, &intel_output->enc,
&intel_dvo_enc_funcs, encoder_type);
drm_encoder_helper_add(&intel_output->enc,
&intel_dvo_helper_funcs);
drm_mode_connector_attach_encoder(&intel_output->base,
&intel_output->enc);
if (dvo->type == INTEL_DVO_CHIP_LVDS) {
/* For our LVDS chipsets, we should hopefully be able
* to dig the fixed panel mode out of the BIOS data.
* However, it's in a different format from the BIOS
* data on chipsets with integrated LVDS (stored in AIM
* headers, likely), so for now, just get the current
* mode being output through DVO.
*/
dvo->panel_fixed_mode =
intel_dvo_get_current_mode(connector);
dvo->panel_wants_dither = true;
}
drm_sysfs_connector_add(connector);
return;
}
intel_i2c_destroy(intel_output->ddc_bus);
/* Didn't find a chip, so tear down. */
if (i2cbus != NULL)
intel_i2c_destroy(i2cbus);
free_intel:
kfree(intel_output);
}

View File

@ -0,0 +1,926 @@
/*
* Copyright © 2007 David Airlie
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* David Airlie
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/sysrq.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
struct intelfb_par {
struct drm_device *dev;
struct drm_display_mode *our_mode;
struct intel_framebuffer *intel_fb;
int crtc_count;
/* crtc currently bound to this */
uint32_t crtc_ids[2];
};
static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
struct fb_info *info)
{
struct intelfb_par *par = info->par;
struct drm_device *dev = par->dev;
struct drm_crtc *crtc;
int i;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct drm_mode_set *modeset = &intel_crtc->mode_set;
struct drm_framebuffer *fb = modeset->fb;
for (i = 0; i < par->crtc_count; i++)
if (crtc->base.id == par->crtc_ids[i])
break;
if (i == par->crtc_count)
continue;
if (regno > 255)
return 1;
if (fb->depth == 8) {
intel_crtc_fb_gamma_set(crtc, red, green, blue, regno);
return 0;
}
if (regno < 16) {
switch (fb->depth) {
case 15:
fb->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
((green & 0xf800) >> 6) |
((blue & 0xf800) >> 11);
break;
case 16:
fb->pseudo_palette[regno] = (red & 0xf800) |
((green & 0xfc00) >> 5) |
((blue & 0xf800) >> 11);
break;
case 24:
case 32:
fb->pseudo_palette[regno] = ((red & 0xff00) << 8) |
(green & 0xff00) |
((blue & 0xff00) >> 8);
break;
}
}
}
return 0;
}
static int intelfb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct intelfb_par *par = info->par;
struct intel_framebuffer *intel_fb = par->intel_fb;
struct drm_framebuffer *fb = &intel_fb->base;
int depth;
if (var->pixclock == -1 || !var->pixclock)
return -EINVAL;
/* Need to resize the fb object !!! */
if (var->xres > fb->width || var->yres > fb->height) {
DRM_ERROR("Requested width/height is greater than current fb object %dx%d > %dx%d\n",var->xres,var->yres,fb->width,fb->height);
DRM_ERROR("Need resizing code.\n");
return -EINVAL;
}
switch (var->bits_per_pixel) {
case 16:
depth = (var->green.length == 6) ? 16 : 15;
break;
case 32:
depth = (var->transp.length > 0) ? 32 : 24;
break;
default:
depth = var->bits_per_pixel;
break;
}
switch (depth) {
case 8:
var->red.offset = 0;
var->green.offset = 0;
var->blue.offset = 0;
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
var->transp.length = 0;
var->transp.offset = 0;
break;
case 15:
var->red.offset = 10;
var->green.offset = 5;
var->blue.offset = 0;
var->red.length = 5;
var->green.length = 5;
var->blue.length = 5;
var->transp.length = 1;
var->transp.offset = 15;
break;
case 16:
var->red.offset = 11;
var->green.offset = 5;
var->blue.offset = 0;
var->red.length = 5;
var->green.length = 6;
var->blue.length = 5;
var->transp.length = 0;
var->transp.offset = 0;
break;
case 24:
var->red.offset = 16;
var->green.offset = 8;
var->blue.offset = 0;
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
var->transp.length = 0;
var->transp.offset = 0;
break;
case 32:
var->red.offset = 16;
var->green.offset = 8;
var->blue.offset = 0;
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
var->transp.length = 8;
var->transp.offset = 24;
break;
default:
return -EINVAL;
}
return 0;
}
/* this will let fbcon do the mode init */
/* FIXME: take mode config lock? */
static int intelfb_set_par(struct fb_info *info)
{
struct intelfb_par *par = info->par;
struct drm_device *dev = par->dev;
struct fb_var_screeninfo *var = &info->var;
int i;
DRM_DEBUG("%d %d\n", var->xres, var->pixclock);
if (var->pixclock != -1) {
DRM_ERROR("PIXEL CLCOK SET\n");
return -EINVAL;
} else {
struct drm_crtc *crtc;
int ret;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
for (i = 0; i < par->crtc_count; i++)
if (crtc->base.id == par->crtc_ids[i])
break;
if (i == par->crtc_count)
continue;
if (crtc->fb == intel_crtc->mode_set.fb) {
mutex_lock(&dev->mode_config.mutex);
ret = crtc->funcs->set_config(&intel_crtc->mode_set);
mutex_unlock(&dev->mode_config.mutex);
if (ret)
return ret;
}
}
return 0;
}
}
static int intelfb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct intelfb_par *par = info->par;
struct drm_device *dev = par->dev;
struct drm_mode_set *modeset;
struct drm_crtc *crtc;
struct intel_crtc *intel_crtc;
int ret = 0;
int i;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
for (i = 0; i < par->crtc_count; i++)
if (crtc->base.id == par->crtc_ids[i])
break;
if (i == par->crtc_count)
continue;
intel_crtc = to_intel_crtc(crtc);
modeset = &intel_crtc->mode_set;
modeset->x = var->xoffset;
modeset->y = var->yoffset;
if (modeset->num_connectors) {
mutex_lock(&dev->mode_config.mutex);
ret = crtc->funcs->set_config(modeset);
mutex_unlock(&dev->mode_config.mutex);
if (!ret) {
info->var.xoffset = var->xoffset;
info->var.yoffset = var->yoffset;
}
}
}
return ret;
}
static void intelfb_on(struct fb_info *info)
{
struct intelfb_par *par = info->par;
struct drm_device *dev = par->dev;
struct drm_crtc *crtc;
struct drm_encoder *encoder;
int i;
/*
* For each CRTC in this fb, find all associated encoders
* and turn them off, then turn off the CRTC.
*/
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
for (i = 0; i < par->crtc_count; i++)
if (crtc->base.id == par->crtc_ids[i])
break;
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
/* Found a CRTC on this fb, now find encoders */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc == crtc) {
struct drm_encoder_helper_funcs *encoder_funcs;
encoder_funcs = encoder->helper_private;
encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
}
}
}
}
static void intelfb_off(struct fb_info *info, int dpms_mode)
{
struct intelfb_par *par = info->par;
struct drm_device *dev = par->dev;
struct drm_crtc *crtc;
struct drm_encoder *encoder;
int i;
/*
* For each CRTC in this fb, find all associated encoders
* and turn them off, then turn off the CRTC.
*/
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
for (i = 0; i < par->crtc_count; i++)
if (crtc->base.id == par->crtc_ids[i])
break;
/* Found a CRTC on this fb, now find encoders */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc == crtc) {
struct drm_encoder_helper_funcs *encoder_funcs;
encoder_funcs = encoder->helper_private;
encoder_funcs->dpms(encoder, dpms_mode);
}
}
if (dpms_mode == DRM_MODE_DPMS_OFF)
crtc_funcs->dpms(crtc, dpms_mode);
}
}
int intelfb_blank(int blank, struct fb_info *info)
{
switch (blank) {
case FB_BLANK_UNBLANK:
intelfb_on(info);
break;
case FB_BLANK_NORMAL:
intelfb_off(info, DRM_MODE_DPMS_STANDBY);
break;
case FB_BLANK_HSYNC_SUSPEND:
intelfb_off(info, DRM_MODE_DPMS_STANDBY);
break;
case FB_BLANK_VSYNC_SUSPEND:
intelfb_off(info, DRM_MODE_DPMS_SUSPEND);
break;
case FB_BLANK_POWERDOWN:
intelfb_off(info, DRM_MODE_DPMS_OFF);
break;
}
return 0;
}
static struct fb_ops intelfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = intelfb_check_var,
.fb_set_par = intelfb_set_par,
.fb_setcolreg = intelfb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_pan_display = intelfb_pan_display,
.fb_blank = intelfb_blank,
};
/**
* Curretly it is assumed that the old framebuffer is reused.
*
* LOCKING
* caller should hold the mode config lock.
*
*/
int intelfb_resize(struct drm_device *dev, struct drm_crtc *crtc)
{
struct fb_info *info;
struct drm_framebuffer *fb;
struct drm_display_mode *mode = crtc->desired_mode;
fb = crtc->fb;
if (!fb)
return 1;
info = fb->fbdev;
if (!info)
return 1;
if (!mode)
return 1;
info->var.xres = mode->hdisplay;
info->var.right_margin = mode->hsync_start - mode->hdisplay;
info->var.hsync_len = mode->hsync_end - mode->hsync_start;
info->var.left_margin = mode->htotal - mode->hsync_end;
info->var.yres = mode->vdisplay;
info->var.lower_margin = mode->vsync_start - mode->vdisplay;
info->var.vsync_len = mode->vsync_end - mode->vsync_start;
info->var.upper_margin = mode->vtotal - mode->vsync_end;
info->var.pixclock = 10000000 / mode->htotal * 1000 / mode->vtotal * 100;
/* avoid overflow */
info->var.pixclock = info->var.pixclock * 1000 / mode->vrefresh;
return 0;
}
EXPORT_SYMBOL(intelfb_resize);
static struct drm_mode_set kernelfb_mode;
int intelfb_panic(struct notifier_block *n, unsigned long ununsed,
void *panic_str)
{
DRM_ERROR("panic occurred, switching back to text console\n");
intelfb_restore();
return 0;
}
EXPORT_SYMBOL(intelfb_panic);
static struct notifier_block paniced = {
.notifier_call = intelfb_panic,
};
int intelfb_create(struct drm_device *dev, uint32_t fb_width,
uint32_t fb_height, uint32_t surface_width,
uint32_t surface_height,
struct intel_framebuffer **intel_fb_p)
{
struct fb_info *info;
struct intelfb_par *par;
struct drm_framebuffer *fb;
struct intel_framebuffer *intel_fb;
struct drm_mode_fb_cmd mode_cmd;
struct drm_gem_object *fbo = NULL;
struct drm_i915_gem_object *obj_priv;
struct device *device = &dev->pdev->dev;
int size, ret, mmio_bar = IS_I9XX(dev) ? 0 : 1;
mode_cmd.width = surface_width;
mode_cmd.height = surface_height;
mode_cmd.bpp = 32;
mode_cmd.pitch = mode_cmd.width * ((mode_cmd.bpp + 1) / 8);
mode_cmd.depth = 24;
size = mode_cmd.pitch * mode_cmd.height;
size = ALIGN(size, PAGE_SIZE);
fbo = drm_gem_object_alloc(dev, size);
if (!fbo) {
printk(KERN_ERR "failed to allocate framebuffer\n");
ret = -ENOMEM;
goto out;
}
obj_priv = fbo->driver_private;
mutex_lock(&dev->struct_mutex);
ret = i915_gem_object_pin(fbo, PAGE_SIZE);
if (ret) {
DRM_ERROR("failed to pin fb: %d\n", ret);
goto out_unref;
}
/* Flush everything out, we'll be doing GTT only from now on */
i915_gem_object_set_to_gtt_domain(fbo, 1);
ret = intel_framebuffer_create(dev, &mode_cmd, &fb, fbo);
if (ret) {
DRM_ERROR("failed to allocate fb.\n");
goto out_unref;
}
list_add(&fb->filp_head, &dev->mode_config.fb_kernel_list);
intel_fb = to_intel_framebuffer(fb);
*intel_fb_p = intel_fb;
info = framebuffer_alloc(sizeof(struct intelfb_par), device);
if (!info) {
ret = -ENOMEM;
goto out_unref;
}
par = info->par;
strcpy(info->fix.id, "inteldrmfb");
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.visual = FB_VISUAL_TRUECOLOR;
info->fix.type_aux = 0;
info->fix.xpanstep = 1; /* doing it in hw */
info->fix.ypanstep = 1; /* doing it in hw */
info->fix.ywrapstep = 0;
info->fix.accel = FB_ACCEL_I830;
info->fix.type_aux = 0;
info->flags = FBINFO_DEFAULT;
info->fbops = &intelfb_ops;
info->fix.line_length = fb->pitch;
info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset;
info->fix.smem_len = size;
info->flags = FBINFO_DEFAULT;
info->screen_base = ioremap_wc(dev->agp->base + obj_priv->gtt_offset,
size);
if (!info->screen_base) {
ret = -ENOSPC;
goto out_unref;
}
info->screen_size = size;
// memset(info->screen_base, 0, size);
info->pseudo_palette = fb->pseudo_palette;
info->var.xres_virtual = fb->width;
info->var.yres_virtual = fb->height;
info->var.bits_per_pixel = fb->bits_per_pixel;
info->var.xoffset = 0;
info->var.yoffset = 0;
info->var.activate = FB_ACTIVATE_NOW;
info->var.height = -1;
info->var.width = -1;
info->var.xres = fb_width;
info->var.yres = fb_height;
/* FIXME: we really shouldn't expose mmio space at all */
info->fix.mmio_start = pci_resource_start(dev->pdev, mmio_bar);
info->fix.mmio_len = pci_resource_len(dev->pdev, mmio_bar);
info->pixmap.size = 64*1024;
info->pixmap.buf_align = 8;
info->pixmap.access_align = 32;
info->pixmap.flags = FB_PIXMAP_SYSTEM;
info->pixmap.scan_align = 1;
switch(fb->depth) {
case 8:
info->var.red.offset = 0;
info->var.green.offset = 0;
info->var.blue.offset = 0;
info->var.red.length = 8; /* 8bit DAC */
info->var.green.length = 8;
info->var.blue.length = 8;
info->var.transp.offset = 0;
info->var.transp.length = 0;
break;
case 15:
info->var.red.offset = 10;
info->var.green.offset = 5;
info->var.blue.offset = 0;
info->var.red.length = 5;
info->var.green.length = 5;
info->var.blue.length = 5;
info->var.transp.offset = 15;
info->var.transp.length = 1;
break;
case 16:
info->var.red.offset = 11;
info->var.green.offset = 5;
info->var.blue.offset = 0;
info->var.red.length = 5;
info->var.green.length = 6;
info->var.blue.length = 5;
info->var.transp.offset = 0;
break;
case 24:
info->var.red.offset = 16;
info->var.green.offset = 8;
info->var.blue.offset = 0;
info->var.red.length = 8;
info->var.green.length = 8;
info->var.blue.length = 8;
info->var.transp.offset = 0;
info->var.transp.length = 0;
break;
case 32:
info->var.red.offset = 16;
info->var.green.offset = 8;
info->var.blue.offset = 0;
info->var.red.length = 8;
info->var.green.length = 8;
info->var.blue.length = 8;
info->var.transp.offset = 24;
info->var.transp.length = 8;
break;
default:
break;
}
fb->fbdev = info;
par->intel_fb = intel_fb;
par->dev = dev;
/* To allow resizeing without swapping buffers */
printk("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
intel_fb->base.height, obj_priv->gtt_offset, fbo);
mutex_unlock(&dev->struct_mutex);
return 0;
out_unref:
drm_gem_object_unreference(fbo);
mutex_unlock(&dev->struct_mutex);
out:
return ret;
}
static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_framebuffer *intel_fb;
struct drm_framebuffer *fb;
struct drm_connector *connector;
struct fb_info *info;
struct intelfb_par *par;
struct drm_mode_set *modeset;
unsigned int width, height;
int new_fb = 0;
int ret, i, conn_count;
if (!drm_helper_crtc_in_use(crtc))
return 0;
if (!crtc->desired_mode)
return 0;
width = crtc->desired_mode->hdisplay;
height = crtc->desired_mode->vdisplay;
/* is there an fb bound to this crtc already */
if (!intel_crtc->mode_set.fb) {
ret = intelfb_create(dev, width, height, width, height, &intel_fb);
if (ret)
return -EINVAL;
new_fb = 1;
} else {
fb = intel_crtc->mode_set.fb;
intel_fb = to_intel_framebuffer(fb);
if ((intel_fb->base.width < width) || (intel_fb->base.height < height))
return -EINVAL;
}
info = intel_fb->base.fbdev;
par = info->par;
modeset = &intel_crtc->mode_set;
modeset->fb = &intel_fb->base;
conn_count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (connector->encoder)
if (connector->encoder->crtc == modeset->crtc) {
modeset->connectors[conn_count] = connector;
conn_count++;
if (conn_count > INTELFB_CONN_LIMIT)
BUG();
}
}
for (i = conn_count; i < INTELFB_CONN_LIMIT; i++)
modeset->connectors[i] = NULL;
par->crtc_ids[0] = crtc->base.id;
modeset->num_connectors = conn_count;
if (modeset->mode != modeset->crtc->desired_mode)
modeset->mode = modeset->crtc->desired_mode;
par->crtc_count = 1;
if (new_fb) {
info->var.pixclock = -1;
if (register_framebuffer(info) < 0)
return -EINVAL;
} else
intelfb_set_par(info);
printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
info->fix.id);
/* Switch back to kernel console on panic */
kernelfb_mode = *modeset;
atomic_notifier_chain_register(&panic_notifier_list, &paniced);
printk(KERN_INFO "registered panic notifier\n");
return 0;
}
static int intelfb_multi_fb_probe(struct drm_device *dev)
{
struct drm_crtc *crtc;
int ret = 0;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
ret = intelfb_multi_fb_probe_crtc(dev, crtc);
if (ret)
return ret;
}
return ret;
}
static int intelfb_single_fb_probe(struct drm_device *dev)
{
struct drm_crtc *crtc;
struct drm_connector *connector;
unsigned int fb_width = (unsigned)-1, fb_height = (unsigned)-1;
unsigned int surface_width = 0, surface_height = 0;
int new_fb = 0;
int crtc_count = 0;
int ret, i, conn_count = 0;
struct intel_framebuffer *intel_fb;
struct fb_info *info;
struct intelfb_par *par;
struct drm_mode_set *modeset = NULL;
DRM_DEBUG("\n");
/* Get a count of crtcs now in use and new min/maxes width/heights */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (!drm_helper_crtc_in_use(crtc))
continue;
crtc_count++;
if (!crtc->desired_mode)
continue;
/* Smallest mode determines console size... */
if (crtc->desired_mode->hdisplay < fb_width)
fb_width = crtc->desired_mode->hdisplay;
if (crtc->desired_mode->vdisplay < fb_height)
fb_height = crtc->desired_mode->vdisplay;
/* ... but largest for memory allocation dimensions */
if (crtc->desired_mode->hdisplay > surface_width)
surface_width = crtc->desired_mode->hdisplay;
if (crtc->desired_mode->vdisplay > surface_height)
surface_height = crtc->desired_mode->vdisplay;
}
if (crtc_count == 0 || fb_width == -1 || fb_height == -1) {
/* hmm everyone went away - assume VGA cable just fell out
and will come back later. */
DRM_DEBUG("no CRTCs available?\n");
return 0;
}
//fail
/* Find the fb for our new config */
if (list_empty(&dev->mode_config.fb_kernel_list)) {
DRM_DEBUG("creating new fb (console size %dx%d, "
"buffer size %dx%d)\n", fb_width, fb_height,
surface_width, surface_height);
ret = intelfb_create(dev, fb_width, fb_height, surface_width,
surface_height, &intel_fb);
if (ret)
return -EINVAL;
new_fb = 1;
} else {
struct drm_framebuffer *fb;
fb = list_first_entry(&dev->mode_config.fb_kernel_list,
struct drm_framebuffer, filp_head);
intel_fb = to_intel_framebuffer(fb);
/* if someone hotplugs something bigger than we have already
* allocated, we are pwned. As really we can't resize an
* fbdev that is in the wild currently due to fbdev not really
* being designed for the lower layers moving stuff around
* under it.
* - so in the grand style of things - punt.
*/
if ((fb->width < surface_width) ||
(fb->height < surface_height)) {
DRM_ERROR("fb not large enough for console\n");
return -EINVAL;
}
}
// fail
info = intel_fb->base.fbdev;
par = info->par;
crtc_count = 0;
/*
* For each CRTC, set up the connector list for the CRTC's mode
* set configuration.
*/
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
modeset = &intel_crtc->mode_set;
modeset->fb = &intel_fb->base;
conn_count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list,
head) {
if (!connector->encoder)
continue;
if(connector->encoder->crtc == modeset->crtc) {
modeset->connectors[conn_count++] = connector;
if (conn_count > INTELFB_CONN_LIMIT)
BUG();
}
}
/* Zero out remaining connector pointers */
for (i = conn_count; i < INTELFB_CONN_LIMIT; i++)
modeset->connectors[i] = NULL;
par->crtc_ids[crtc_count++] = crtc->base.id;
modeset->num_connectors = conn_count;
if (modeset->mode != modeset->crtc->desired_mode)
modeset->mode = modeset->crtc->desired_mode;
}
par->crtc_count = crtc_count;
if (new_fb) {
info->var.pixclock = -1;
if (register_framebuffer(info) < 0)
return -EINVAL;
} else
intelfb_set_par(info);
printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
info->fix.id);
/* Switch back to kernel console on panic */
kernelfb_mode = *modeset;
atomic_notifier_chain_register(&panic_notifier_list, &paniced);
printk(KERN_INFO "registered panic notifier\n");
return 0;
}
/**
* intelfb_restore - restore the framebuffer console (kernel) config
*
* Restore's the kernel's fbcon mode, used for lastclose & panic paths.
*/
void intelfb_restore(void)
{
drm_crtc_helper_set_config(&kernelfb_mode);
}
static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3)
{
intelfb_restore();
}
static struct sysrq_key_op sysrq_intelfb_restore_op = {
.handler = intelfb_sysrq,
.help_msg = "force fb",
.action_msg = "force restore of fb console",
};
int intelfb_probe(struct drm_device *dev)
{
int ret;
DRM_DEBUG("\n");
/* something has changed in the lower levels of hell - deal with it
here */
/* two modes : a) 1 fb to rule all crtcs.
b) one fb per crtc.
two actions 1) new connected device
2) device removed.
case a/1 : if the fb surface isn't big enough - resize the surface fb.
if the fb size isn't big enough - resize fb into surface.
if everything big enough configure the new crtc/etc.
case a/2 : undo the configuration
possibly resize down the fb to fit the new configuration.
case b/1 : see if it is on a new crtc - setup a new fb and add it.
case b/2 : teardown the new fb.
*/
/* mode a first */
/* search for an fb */
if (i915_fbpercrtc == 1) {
ret = intelfb_multi_fb_probe(dev);
} else {
ret = intelfb_single_fb_probe(dev);
}
register_sysrq_key('g', &sysrq_intelfb_restore_op);
return ret;
}
EXPORT_SYMBOL(intelfb_probe);
int intelfb_remove(struct drm_device *dev, struct drm_framebuffer *fb)
{
struct fb_info *info;
if (!fb)
return -EINVAL;
info = fb->fbdev;
if (info) {
unregister_framebuffer(info);
iounmap(info->screen_base);
framebuffer_release(info);
}
atomic_notifier_chain_unregister(&panic_notifier_list, &paniced);
memset(&kernelfb_mode, 0, sizeof(struct drm_mode_set));
return 0;
}
EXPORT_SYMBOL(intelfb_remove);
MODULE_LICENSE("GPL and additional rights");

View File

@ -0,0 +1,184 @@
/*
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
* Copyright © 2006-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*/
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/i2c-algo-bit.h>
#include "drmP.h"
#include "drm.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
/*
* Intel GPIO access functions
*/
#define I2C_RISEFALL_TIME 20
static int get_clock(void *data)
{
struct intel_i2c_chan *chan = data;
struct drm_i915_private *dev_priv = chan->drm_dev->dev_private;
u32 val;
val = I915_READ(chan->reg);
return ((val & GPIO_CLOCK_VAL_IN) != 0);
}
static int get_data(void *data)
{
struct intel_i2c_chan *chan = data;
struct drm_i915_private *dev_priv = chan->drm_dev->dev_private;
u32 val;
val = I915_READ(chan->reg);
return ((val & GPIO_DATA_VAL_IN) != 0);
}
static void set_clock(void *data, int state_high)
{
struct intel_i2c_chan *chan = data;
struct drm_device *dev = chan->drm_dev;
struct drm_i915_private *dev_priv = chan->drm_dev->dev_private;
u32 reserved = 0, clock_bits;
/* On most chips, these bits must be preserved in software. */
if (!IS_I830(dev) && !IS_845G(dev))
reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
GPIO_CLOCK_PULLUP_DISABLE);
if (state_high)
clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
else
clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
GPIO_CLOCK_VAL_MASK;
I915_WRITE(chan->reg, reserved | clock_bits);
udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */
}
static void set_data(void *data, int state_high)
{
struct intel_i2c_chan *chan = data;
struct drm_device *dev = chan->drm_dev;
struct drm_i915_private *dev_priv = chan->drm_dev->dev_private;
u32 reserved = 0, data_bits;
/* On most chips, these bits must be preserved in software. */
if (!IS_I830(dev) && !IS_845G(dev))
reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
GPIO_CLOCK_PULLUP_DISABLE);
if (state_high)
data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
else
data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
GPIO_DATA_VAL_MASK;
I915_WRITE(chan->reg, reserved | data_bits);
udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */
}
/**
* intel_i2c_create - instantiate an Intel i2c bus using the specified GPIO reg
* @dev: DRM device
* @output: driver specific output device
* @reg: GPIO reg to use
* @name: name for this bus
*
* Creates and registers a new i2c bus with the Linux i2c layer, for use
* in output probing and control (e.g. DDC or SDVO control functions).
*
* Possible values for @reg include:
* %GPIOA
* %GPIOB
* %GPIOC
* %GPIOD
* %GPIOE
* %GPIOF
* %GPIOG
* %GPIOH
* see PRM for details on how these different busses are used.
*/
struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
const char *name)
{
struct intel_i2c_chan *chan;
chan = kzalloc(sizeof(struct intel_i2c_chan), GFP_KERNEL);
if (!chan)
goto out_free;
chan->drm_dev = dev;
chan->reg = reg;
snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name);
chan->adapter.owner = THIS_MODULE;
#ifndef I2C_HW_B_INTELFB
#define I2C_HW_B_INTELFB I2C_HW_B_I810
#endif
chan->adapter.id = I2C_HW_B_INTELFB;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &dev->pdev->dev;
chan->algo.setsda = set_data;
chan->algo.setscl = set_clock;
chan->algo.getsda = get_data;
chan->algo.getscl = get_clock;
chan->algo.udelay = 20;
chan->algo.timeout = usecs_to_jiffies(2200);
chan->algo.data = chan;
i2c_set_adapdata(&chan->adapter, chan);
if(i2c_bit_add_bus(&chan->adapter))
goto out_free;
/* JJJ: raise SCL and SDA? */
set_data(chan, 1);
set_clock(chan, 1);
udelay(20);
return chan;
out_free:
kfree(chan);
return NULL;
}
/**
* intel_i2c_destroy - unregister and free i2c bus resources
* @output: channel to free
*
* Unregister the adapter from the i2c layer, then free the structure.
*/
void intel_i2c_destroy(struct intel_i2c_chan *chan)
{
if (!chan)
return;
i2c_del_adapter(&chan->adapter);
kfree(chan);
}

View File

@ -0,0 +1,525 @@
/*
* Copyright © 2006-2007 Intel Corporation
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/i2c.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
/**
* Sets the backlight level.
*
* \param level backlight level, from 0 to intel_lvds_get_max_backlight().
*/
static void intel_lvds_set_backlight(struct drm_device *dev, int level)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 blc_pwm_ctl;
blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
I915_WRITE(BLC_PWM_CTL, (blc_pwm_ctl |
(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
}
/**
* Returns the maximum level of the backlight duty cycle field.
*/
static u32 intel_lvds_get_max_backlight(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >>
BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
}
/**
* Sets the power state for the panel.
*/
static void intel_lvds_set_power(struct drm_device *dev, bool on)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp_status;
if (on) {
I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
POWER_TARGET_ON);
do {
pp_status = I915_READ(PP_STATUS);
} while ((pp_status & PP_ON) == 0);
intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle);
} else {
intel_lvds_set_backlight(dev, 0);
I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) &
~POWER_TARGET_ON);
do {
pp_status = I915_READ(PP_STATUS);
} while (pp_status & PP_ON);
}
}
static void intel_lvds_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
if (mode == DRM_MODE_DPMS_ON)
intel_lvds_set_power(dev, true);
else
intel_lvds_set_power(dev, false);
/* XXX: We never power down the LVDS pairs. */
}
static void intel_lvds_save(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->savePP_ON = I915_READ(PP_ON_DELAYS);
dev_priv->savePP_OFF = I915_READ(PP_OFF_DELAYS);
dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
BACKLIGHT_DUTY_CYCLE_MASK);
/*
* If the light is off at server startup, just make it full brightness
*/
if (dev_priv->backlight_duty_cycle == 0)
dev_priv->backlight_duty_cycle =
intel_lvds_get_max_backlight(dev);
}
static void intel_lvds_restore(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON);
I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF);
I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
if (dev_priv->savePP_CONTROL & POWER_TARGET_ON)
intel_lvds_set_power(dev, true);
else
intel_lvds_set_power(dev, false);
}
static int intel_lvds_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode;
if (fixed_mode) {
if (mode->hdisplay > fixed_mode->hdisplay)
return MODE_PANEL;
if (mode->vdisplay > fixed_mode->vdisplay)
return MODE_PANEL;
}
return MODE_OK;
}
static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct drm_encoder *tmp_encoder;
/* Should never happen!! */
if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
printk(KERN_ERR "Can't support LVDS on pipe A\n");
return false;
}
/* Should never happen!! */
list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
printk(KERN_ERR "Can't enable LVDS and another "
"encoder on the same pipe\n");
return false;
}
}
/*
* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
* with the panel scaling set up to source from the H/VDisplay
* of the original mode.
*/
if (dev_priv->panel_fixed_mode != NULL) {
adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay;
adjusted_mode->hsync_start =
dev_priv->panel_fixed_mode->hsync_start;
adjusted_mode->hsync_end =
dev_priv->panel_fixed_mode->hsync_end;
adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal;
adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay;
adjusted_mode->vsync_start =
dev_priv->panel_fixed_mode->vsync_start;
adjusted_mode->vsync_end =
dev_priv->panel_fixed_mode->vsync_end;
adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal;
adjusted_mode->clock = dev_priv->panel_fixed_mode->clock;
drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
}
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
* user's requested refresh rate.
*/
return true;
}
static void intel_lvds_prepare(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
BACKLIGHT_DUTY_CYCLE_MASK);
intel_lvds_set_power(dev, false);
}
static void intel_lvds_commit( struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
if (dev_priv->backlight_duty_cycle == 0)
dev_priv->backlight_duty_cycle =
intel_lvds_get_max_backlight(dev);
intel_lvds_set_power(dev, true);
}
static void intel_lvds_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
u32 pfit_control;
/*
* The LVDS pin pair will already have been turned on in the
* intel_crtc_mode_set since it has a large impact on the DPLL
* settings.
*/
/*
* Enable automatic panel scaling so that non-native modes fill the
* screen. Should be enabled before the pipe is enabled, according to
* register description and PRM.
*/
if (mode->hdisplay != adjusted_mode->hdisplay ||
mode->vdisplay != adjusted_mode->vdisplay)
pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
HORIZ_INTERP_BILINEAR);
else
pfit_control = 0;
if (!IS_I965G(dev)) {
if (dev_priv->panel_wants_dither)
pfit_control |= PANEL_8TO6_DITHER_ENABLE;
}
else
pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;
I915_WRITE(PFIT_CONTROL, pfit_control);
}
/**
* Detect the LVDS connection.
*
* This always returns CONNECTOR_STATUS_CONNECTED. This connector should only have
* been set up if the LVDS was actually connected anyway.
*/
static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector)
{
return connector_status_connected;
}
/**
* Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
*/
static int intel_lvds_get_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct intel_output *intel_output = to_intel_output(connector);
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = 0;
ret = intel_ddc_get_modes(intel_output);
if (ret)
return ret;
/* Didn't get an EDID, so
* Set wide sync ranges so we get all modes
* handed to valid_mode for checking
*/
connector->display_info.min_vfreq = 0;
connector->display_info.max_vfreq = 200;
connector->display_info.min_hfreq = 0;
connector->display_info.max_hfreq = 200;
if (dev_priv->panel_fixed_mode != NULL) {
struct drm_display_mode *mode;
mutex_unlock(&dev->mode_config.mutex);
mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
drm_mode_probed_add(connector, mode);
mutex_unlock(&dev->mode_config.mutex);
return 1;
}
return 0;
}
/**
* intel_lvds_destroy - unregister and free LVDS structures
* @connector: connector to free
*
* Unregister the DDC bus for this connector then free the driver private
* structure.
*/
static void intel_lvds_destroy(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
}
static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
.dpms = intel_lvds_dpms,
.mode_fixup = intel_lvds_mode_fixup,
.prepare = intel_lvds_prepare,
.mode_set = intel_lvds_mode_set,
.commit = intel_lvds_commit,
};
static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
.get_modes = intel_lvds_get_modes,
.mode_valid = intel_lvds_mode_valid,
.best_encoder = intel_best_encoder,
};
static const struct drm_connector_funcs intel_lvds_connector_funcs = {
.save = intel_lvds_save,
.restore = intel_lvds_restore,
.detect = intel_lvds_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = intel_lvds_destroy,
};
static void intel_lvds_enc_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
}
static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
.destroy = intel_lvds_enc_destroy,
};
/**
* intel_lvds_init - setup LVDS connectors on this device
* @dev: drm device
*
* Create the connector, register the LVDS DDC bus, and try to figure out what
* modes we can display on the LVDS panel (if present).
*/
void intel_lvds_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_output *intel_output;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
struct drm_crtc *crtc;
u32 lvds;
int pipe;
intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
if (!intel_output) {
return;
}
connector = &intel_output->base;
encoder = &intel_output->enc;
drm_connector_init(dev, &intel_output->base, &intel_lvds_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
drm_encoder_init(dev, &intel_output->enc, &intel_lvds_enc_funcs,
DRM_MODE_ENCODER_LVDS);
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
intel_output->type = INTEL_OUTPUT_LVDS;
drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
/*
* LVDS discovery:
* 1) check for EDID on DDC
* 2) check for VBT data
* 3) check to see if LVDS is already on
* if none of the above, no panel
* 4) make sure lid is open
* if closed, act like it's not there for now
*/
/* Set up the DDC bus. */
intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C");
if (!intel_output->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
"failed.\n");
goto failed;
}
/*
* Attempt to get the fixed panel mode from DDC. Assume that the
* preferred mode is the right one.
*/
intel_ddc_get_modes(intel_output);
list_for_each_entry(scan, &connector->probed_modes, head) {
mutex_lock(&dev->mode_config.mutex);
if (scan->type & DRM_MODE_TYPE_PREFERRED) {
dev_priv->panel_fixed_mode =
drm_mode_duplicate(dev, scan);
mutex_unlock(&dev->mode_config.mutex);
goto out; /* FIXME: check for quirks */
}
mutex_unlock(&dev->mode_config.mutex);
}
/* Failed to get EDID, what about VBT? */
if (dev_priv->vbt_mode) {
mutex_lock(&dev->mode_config.mutex);
dev_priv->panel_fixed_mode =
drm_mode_duplicate(dev, dev_priv->vbt_mode);
mutex_unlock(&dev->mode_config.mutex);
}
/*
* If we didn't get EDID, try checking if the panel is already turned
* on. If so, assume that whatever is currently programmed is the
* correct mode.
*/
lvds = I915_READ(LVDS);
pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
crtc = intel_get_crtc_from_pipe(dev, pipe);
if (crtc && (lvds & LVDS_PORT_EN)) {
dev_priv->panel_fixed_mode = intel_crtc_mode_get(dev, crtc);
if (dev_priv->panel_fixed_mode) {
dev_priv->panel_fixed_mode->type |=
DRM_MODE_TYPE_PREFERRED;
goto out; /* FIXME: check for quirks */
}
}
/* If we still don't have a mode after all that, give up. */
if (!dev_priv->panel_fixed_mode)
goto failed;
/* FIXME: detect aopen & mac mini type stuff automatically? */
/*
* Blacklist machines with BIOSes that list an LVDS panel without
* actually having one.
*/
if (IS_I945GM(dev)) {
/* aopen mini pc */
if (dev->pdev->subsystem_vendor == 0xa0a0)
goto failed;
if ((dev->pdev->subsystem_vendor == 0x8086) &&
(dev->pdev->subsystem_device == 0x7270)) {
/* It's a Mac Mini or Macbook Pro.
*
* Apple hardware is out to get us. The macbook pro
* has a real LVDS panel, but the mac mini does not,
* and they have the same device IDs. We'll
* distinguish by panel size, on the assumption
* that Apple isn't about to make any machines with an
* 800x600 display.
*/
if (dev_priv->panel_fixed_mode != NULL &&
dev_priv->panel_fixed_mode->hdisplay == 800 &&
dev_priv->panel_fixed_mode->vdisplay == 600) {
DRM_DEBUG("Suspected Mac Mini, ignoring the LVDS\n");
goto failed;
}
}
}
out:
drm_sysfs_connector_add(connector);
return;
failed:
DRM_DEBUG("No LVDS modes found, disabling.\n");
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
drm_connector_cleanup(connector);
kfree(connector);
}

View File

@ -0,0 +1,83 @@
/*
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
* Copyright (c) 2007 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include <linux/i2c.h>
#include <linux/fb.h>
#include "drmP.h"
#include "intel_drv.h"
/**
* intel_ddc_probe
*
*/
bool intel_ddc_probe(struct intel_output *intel_output)
{
u8 out_buf[] = { 0x0, 0x0};
u8 buf[2];
int ret;
struct i2c_msg msgs[] = {
{
.addr = 0x50,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
.addr = 0x50,
.flags = I2C_M_RD,
.len = 1,
.buf = buf,
}
};
ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
if (ret == 2)
return true;
return false;
}
/**
* intel_ddc_get_modes - get modelist from monitor
* @connector: DRM connector device to use
*
* Fetch the EDID information from @connector using the DDC bus.
*/
int intel_ddc_get_modes(struct intel_output *intel_output)
{
struct edid *edid;
int ret = 0;
edid = drm_get_edid(&intel_output->base,
&intel_output->ddc_bus->adapter);
if (edid) {
drm_mode_connector_update_edid_property(&intel_output->base,
edid);
ret = drm_add_edid_modes(&intel_output->base, edid);
kfree(edid);
}
return ret;
}

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,327 @@
/*
* Copyright © 2006-2007 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*/
/**
* @file SDVO command definitions and structures.
*/
#define SDVO_OUTPUT_FIRST (0)
#define SDVO_OUTPUT_TMDS0 (1 << 0)
#define SDVO_OUTPUT_RGB0 (1 << 1)
#define SDVO_OUTPUT_CVBS0 (1 << 2)
#define SDVO_OUTPUT_SVID0 (1 << 3)
#define SDVO_OUTPUT_YPRPB0 (1 << 4)
#define SDVO_OUTPUT_SCART0 (1 << 5)
#define SDVO_OUTPUT_LVDS0 (1 << 6)
#define SDVO_OUTPUT_TMDS1 (1 << 8)
#define SDVO_OUTPUT_RGB1 (1 << 9)
#define SDVO_OUTPUT_CVBS1 (1 << 10)
#define SDVO_OUTPUT_SVID1 (1 << 11)
#define SDVO_OUTPUT_YPRPB1 (1 << 12)
#define SDVO_OUTPUT_SCART1 (1 << 13)
#define SDVO_OUTPUT_LVDS1 (1 << 14)
#define SDVO_OUTPUT_LAST (14)
struct intel_sdvo_caps {
u8 vendor_id;
u8 device_id;
u8 device_rev_id;
u8 sdvo_version_major;
u8 sdvo_version_minor;
unsigned int sdvo_inputs_mask:2;
unsigned int smooth_scaling:1;
unsigned int sharp_scaling:1;
unsigned int up_scaling:1;
unsigned int down_scaling:1;
unsigned int stall_support:1;
unsigned int pad:1;
u16 output_flags;
} __attribute__((packed));
/** This matches the EDID DTD structure, more or less */
struct intel_sdvo_dtd {
struct {
u16 clock; /**< pixel clock, in 10kHz units */
u8 h_active; /**< lower 8 bits (pixels) */
u8 h_blank; /**< lower 8 bits (pixels) */
u8 h_high; /**< upper 4 bits each h_active, h_blank */
u8 v_active; /**< lower 8 bits (lines) */
u8 v_blank; /**< lower 8 bits (lines) */
u8 v_high; /**< upper 4 bits each v_active, v_blank */
} part1;
struct {
u8 h_sync_off; /**< lower 8 bits, from hblank start */
u8 h_sync_width; /**< lower 8 bits (pixels) */
/** lower 4 bits each vsync offset, vsync width */
u8 v_sync_off_width;
/**
* 2 high bits of hsync offset, 2 high bits of hsync width,
* bits 4-5 of vsync offset, and 2 high bits of vsync width.
*/
u8 sync_off_width_high;
u8 dtd_flags;
u8 sdvo_flags;
/** bits 6-7 of vsync offset at bits 6-7 */
u8 v_sync_off_high;
u8 reserved;
} part2;
} __attribute__((packed));
struct intel_sdvo_pixel_clock_range {
u16 min; /**< pixel clock, in 10kHz units */
u16 max; /**< pixel clock, in 10kHz units */
} __attribute__((packed));
struct intel_sdvo_preferred_input_timing_args {
u16 clock;
u16 width;
u16 height;
} __attribute__((packed));
/* I2C registers for SDVO */
#define SDVO_I2C_ARG_0 0x07
#define SDVO_I2C_ARG_1 0x06
#define SDVO_I2C_ARG_2 0x05
#define SDVO_I2C_ARG_3 0x04
#define SDVO_I2C_ARG_4 0x03
#define SDVO_I2C_ARG_5 0x02
#define SDVO_I2C_ARG_6 0x01
#define SDVO_I2C_ARG_7 0x00
#define SDVO_I2C_OPCODE 0x08
#define SDVO_I2C_CMD_STATUS 0x09
#define SDVO_I2C_RETURN_0 0x0a
#define SDVO_I2C_RETURN_1 0x0b
#define SDVO_I2C_RETURN_2 0x0c
#define SDVO_I2C_RETURN_3 0x0d
#define SDVO_I2C_RETURN_4 0x0e
#define SDVO_I2C_RETURN_5 0x0f
#define SDVO_I2C_RETURN_6 0x10
#define SDVO_I2C_RETURN_7 0x11
#define SDVO_I2C_VENDOR_BEGIN 0x20
/* Status results */
#define SDVO_CMD_STATUS_POWER_ON 0x0
#define SDVO_CMD_STATUS_SUCCESS 0x1
#define SDVO_CMD_STATUS_NOTSUPP 0x2
#define SDVO_CMD_STATUS_INVALID_ARG 0x3
#define SDVO_CMD_STATUS_PENDING 0x4
#define SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED 0x5
#define SDVO_CMD_STATUS_SCALING_NOT_SUPP 0x6
/* SDVO commands, argument/result registers */
#define SDVO_CMD_RESET 0x01
/** Returns a struct intel_sdvo_caps */
#define SDVO_CMD_GET_DEVICE_CAPS 0x02
#define SDVO_CMD_GET_FIRMWARE_REV 0x86
# define SDVO_DEVICE_FIRMWARE_MINOR SDVO_I2C_RETURN_0
# define SDVO_DEVICE_FIRMWARE_MAJOR SDVO_I2C_RETURN_1
# define SDVO_DEVICE_FIRMWARE_PATCH SDVO_I2C_RETURN_2
/**
* Reports which inputs are trained (managed to sync).
*
* Devices must have trained within 2 vsyncs of a mode change.
*/
#define SDVO_CMD_GET_TRAINED_INPUTS 0x03
struct intel_sdvo_get_trained_inputs_response {
unsigned int input0_trained:1;
unsigned int input1_trained:1;
unsigned int pad:6;
} __attribute__((packed));
/** Returns a struct intel_sdvo_output_flags of active outputs. */
#define SDVO_CMD_GET_ACTIVE_OUTPUTS 0x04
/**
* Sets the current set of active outputs.
*
* Takes a struct intel_sdvo_output_flags. Must be preceded by a SET_IN_OUT_MAP
* on multi-output devices.
*/
#define SDVO_CMD_SET_ACTIVE_OUTPUTS 0x05
/**
* Returns the current mapping of SDVO inputs to outputs on the device.
*
* Returns two struct intel_sdvo_output_flags structures.
*/
#define SDVO_CMD_GET_IN_OUT_MAP 0x06
/**
* Sets the current mapping of SDVO inputs to outputs on the device.
*
* Takes two struct i380_sdvo_output_flags structures.
*/
#define SDVO_CMD_SET_IN_OUT_MAP 0x07
/**
* Returns a struct intel_sdvo_output_flags of attached displays.
*/
#define SDVO_CMD_GET_ATTACHED_DISPLAYS 0x0b
/**
* Returns a struct intel_sdvo_ouptut_flags of displays supporting hot plugging.
*/
#define SDVO_CMD_GET_HOT_PLUG_SUPPORT 0x0c
/**
* Takes a struct intel_sdvo_output_flags.
*/
#define SDVO_CMD_SET_ACTIVE_HOT_PLUG 0x0d
/**
* Returns a struct intel_sdvo_output_flags of displays with hot plug
* interrupts enabled.
*/
#define SDVO_CMD_GET_ACTIVE_HOT_PLUG 0x0e
#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE 0x0f
struct intel_sdvo_get_interrupt_event_source_response {
u16 interrupt_status;
unsigned int ambient_light_interrupt:1;
unsigned int pad:7;
} __attribute__((packed));
/**
* Selects which input is affected by future input commands.
*
* Commands affected include SET_INPUT_TIMINGS_PART[12],
* GET_INPUT_TIMINGS_PART[12], GET_PREFERRED_INPUT_TIMINGS_PART[12],
* GET_INPUT_PIXEL_CLOCK_RANGE, and CREATE_PREFERRED_INPUT_TIMINGS.
*/
#define SDVO_CMD_SET_TARGET_INPUT 0x10
struct intel_sdvo_set_target_input_args {
unsigned int target_1:1;
unsigned int pad:7;
} __attribute__((packed));
/**
* Takes a struct intel_sdvo_output_flags of which outputs are targetted by
* future output commands.
*
* Affected commands inclue SET_OUTPUT_TIMINGS_PART[12],
* GET_OUTPUT_TIMINGS_PART[12], and GET_OUTPUT_PIXEL_CLOCK_RANGE.
*/
#define SDVO_CMD_SET_TARGET_OUTPUT 0x11
#define SDVO_CMD_GET_INPUT_TIMINGS_PART1 0x12
#define SDVO_CMD_GET_INPUT_TIMINGS_PART2 0x13
#define SDVO_CMD_SET_INPUT_TIMINGS_PART1 0x14
#define SDVO_CMD_SET_INPUT_TIMINGS_PART2 0x15
#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART1 0x16
#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART2 0x17
#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART1 0x18
#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART2 0x19
/* Part 1 */
# define SDVO_DTD_CLOCK_LOW SDVO_I2C_ARG_0
# define SDVO_DTD_CLOCK_HIGH SDVO_I2C_ARG_1
# define SDVO_DTD_H_ACTIVE SDVO_I2C_ARG_2
# define SDVO_DTD_H_BLANK SDVO_I2C_ARG_3
# define SDVO_DTD_H_HIGH SDVO_I2C_ARG_4
# define SDVO_DTD_V_ACTIVE SDVO_I2C_ARG_5
# define SDVO_DTD_V_BLANK SDVO_I2C_ARG_6
# define SDVO_DTD_V_HIGH SDVO_I2C_ARG_7
/* Part 2 */
# define SDVO_DTD_HSYNC_OFF SDVO_I2C_ARG_0
# define SDVO_DTD_HSYNC_WIDTH SDVO_I2C_ARG_1
# define SDVO_DTD_VSYNC_OFF_WIDTH SDVO_I2C_ARG_2
# define SDVO_DTD_SYNC_OFF_WIDTH_HIGH SDVO_I2C_ARG_3
# define SDVO_DTD_DTD_FLAGS SDVO_I2C_ARG_4
# define SDVO_DTD_DTD_FLAG_INTERLACED (1 << 7)
# define SDVO_DTD_DTD_FLAG_STEREO_MASK (3 << 5)
# define SDVO_DTD_DTD_FLAG_INPUT_MASK (3 << 3)
# define SDVO_DTD_DTD_FLAG_SYNC_MASK (3 << 1)
# define SDVO_DTD_SDVO_FLAS SDVO_I2C_ARG_5
# define SDVO_DTD_SDVO_FLAG_STALL (1 << 7)
# define SDVO_DTD_SDVO_FLAG_CENTERED (0 << 6)
# define SDVO_DTD_SDVO_FLAG_UPPER_LEFT (1 << 6)
# define SDVO_DTD_SDVO_FLAG_SCALING_MASK (3 << 4)
# define SDVO_DTD_SDVO_FLAG_SCALING_NONE (0 << 4)
# define SDVO_DTD_SDVO_FLAG_SCALING_SHARP (1 << 4)
# define SDVO_DTD_SDVO_FLAG_SCALING_SMOOTH (2 << 4)
# define SDVO_DTD_VSYNC_OFF_HIGH SDVO_I2C_ARG_6
/**
* Generates a DTD based on the given width, height, and flags.
*
* This will be supported by any device supporting scaling or interlaced
* modes.
*/
#define SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING 0x1a
# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_LOW SDVO_I2C_ARG_0
# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_HIGH SDVO_I2C_ARG_1
# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_LOW SDVO_I2C_ARG_2
# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_HIGH SDVO_I2C_ARG_3
# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_LOW SDVO_I2C_ARG_4
# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_HIGH SDVO_I2C_ARG_5
# define SDVO_PREFERRED_INPUT_TIMING_FLAGS SDVO_I2C_ARG_6
# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_INTERLACED (1 << 0)
# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_SCALED (1 << 1)
#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1 0x1b
#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2 0x1c
/** Returns a struct intel_sdvo_pixel_clock_range */
#define SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE 0x1d
/** Returns a struct intel_sdvo_pixel_clock_range */
#define SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE 0x1e
/** Returns a byte bitfield containing SDVO_CLOCK_RATE_MULT_* flags */
#define SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS 0x1f
/** Returns a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
#define SDVO_CMD_GET_CLOCK_RATE_MULT 0x20
/** Takes a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
#define SDVO_CMD_SET_CLOCK_RATE_MULT 0x21
# define SDVO_CLOCK_RATE_MULT_1X (1 << 0)
# define SDVO_CLOCK_RATE_MULT_2X (1 << 1)
# define SDVO_CLOCK_RATE_MULT_4X (1 << 3)
#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS 0x27
#define SDVO_CMD_GET_TV_FORMAT 0x28
#define SDVO_CMD_SET_TV_FORMAT 0x29
#define SDVO_CMD_GET_SUPPORTED_POWER_STATES 0x2a
#define SDVO_CMD_GET_ENCODER_POWER_STATE 0x2b
#define SDVO_CMD_SET_ENCODER_POWER_STATE 0x2c
# define SDVO_ENCODER_STATE_ON (1 << 0)
# define SDVO_ENCODER_STATE_STANDBY (1 << 1)
# define SDVO_ENCODER_STATE_SUSPEND (1 << 2)
# define SDVO_ENCODER_STATE_OFF (1 << 3)
#define SDVO_CMD_SET_TV_RESOLUTION_SUPPORT 0x93
#define SDVO_CMD_SET_CONTROL_BUS_SWITCH 0x7a
# define SDVO_CONTROL_BUS_PROM 0x0
# define SDVO_CONTROL_BUS_DDC1 0x1
# define SDVO_CONTROL_BUS_DDC2 0x2
# define SDVO_CONTROL_BUS_DDC3 0x3

File diff suppressed because it is too large Load Diff

View File

@ -198,7 +198,7 @@ typedef struct _drm_i915_sarea {
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
*/
typedef struct _drm_i915_batchbuffer {
typedef struct drm_i915_batchbuffer {
int start; /* agp offset */
int used; /* nr bytes in use */
int DR1; /* hw flags for GFX_OP_DRAWRECT_INFO */