cleanup after APUS removal

After the APUS removal, some code can be removed.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Karsten Keil <kkeil@suse.de>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Adrian Bunk 2008-02-06 01:36:29 -08:00 committed by Linus Torvalds
parent b524b9adb3
commit 7b892806b0
11 changed files with 10 additions and 29 deletions

View file

@ -32,12 +32,10 @@ void __init amiga_chip_init(void)
if (!AMIGAHW_PRESENT(CHIP_RAM))
return;
#ifndef CONFIG_APUS_FAST_EXCEPT
/*
* Remove the first 4 pages where PPC exception handlers will be located
*/
amiga_chip_size -= 0x4000;
#endif
chipram_res.end = amiga_chip_size-1;
request_resource(&iomem_resource, &chipram_res);

View file

@ -1049,7 +1049,7 @@ static int init_irq (ide_hwif_t *hwif)
*/
if (!match || match->irq != hwif->irq) {
int sa = 0;
#if defined(__mc68000__) || defined(CONFIG_APUS)
#if defined(__mc68000__)
sa = IRQF_SHARED;
#endif /* __mc68000__ || CONFIG_APUS */
@ -1072,7 +1072,7 @@ static int init_irq (ide_hwif_t *hwif)
hwif->rqsize = 65536;
}
#if !defined(__mc68000__) && !defined(CONFIG_APUS)
#if !defined(__mc68000__)
printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET],
hwif->io_ports[IDE_DATA_OFFSET]+7,
@ -1080,7 +1080,7 @@ static int init_irq (ide_hwif_t *hwif)
#else
printk("%s at 0x%08lx on irq %d", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET], hwif->irq);
#endif /* __mc68000__ && CONFIG_APUS */
#endif /* __mc68000__ */
if (match)
printk(" (%sed with %s)",
hwif->sharing_irq ? "shar" : "serializ", match->name);

View file

@ -263,11 +263,7 @@ hdlc_empty_fifo(struct BCState *bcs, int count)
outl(idx, cs->hw.avm.cfg_reg + 4);
while (cnt < count) {
#ifdef __powerpc__
#ifdef CONFIG_APUS
*ptr++ = in_le32((unsigned *)(cs->hw.avm.isac +_IO_BASE));
#else
*ptr++ = in_be32((unsigned *)(cs->hw.avm.isac +_IO_BASE));
#endif /* CONFIG_APUS */
#else
*ptr++ = inl(cs->hw.avm.isac);
#endif /* __powerpc__ */
@ -328,11 +324,7 @@ hdlc_fill_fifo(struct BCState *bcs)
if (cs->subtyp == AVM_FRITZ_PCI) {
while (cnt<count) {
#ifdef __powerpc__
#ifdef CONFIG_APUS
out_le32((unsigned *)(cs->hw.avm.isac +_IO_BASE), *ptr++);
#else
out_be32((unsigned *)(cs->hw.avm.isac +_IO_BASE), *ptr++);
#endif /* CONFIG_APUS */
#else
outl(*ptr++, cs->hw.avm.isac);
#endif /* __powerpc__ */

View file

@ -46,8 +46,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
struct Scsi_Host *instance = cmd->device->host;
/* don't allow DMA if the physical address is bad */
if (addr & A2091_XFER_MASK ||
(!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
if (addr & A2091_XFER_MASK)
{
HDATA(instance)->dma_bounce_len = (cmd->SCp.this_residual + 511)
& ~0x1ff;

View file

@ -54,8 +54,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
* end of a physical memory chunk, then allocate a bounce
* buffer
*/
if (addr & A3000_XFER_MASK ||
(!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
if (addr & A3000_XFER_MASK)
{
HDATA(a3000_host)->dma_bounce_len = (cmd->SCp.this_residual + 511)
& ~0x1ff;

View file

@ -54,8 +54,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
static int scsi_alloc_out_of_range = 0;
/* use bounce buffer if the physical address is bad */
if (addr & HDATA(cmd->device->host)->dma_xfer_mask ||
(!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
if (addr & HDATA(cmd->device->host)->dma_xfer_mask)
{
HDATA(cmd->device->host)->dma_bounce_len = (cmd->SCp.this_residual + 511)
& ~0x1ff;

View file

@ -84,7 +84,7 @@
#ifdef CONFIG_MAC
#include <asm/macints.h>
#endif
#if defined(__mc68000__) || defined(CONFIG_APUS)
#if defined(__mc68000__)
#include <asm/machdep.h>
#include <asm/setup.h>
#endif

View file

@ -15,7 +15,7 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#if defined(__mc68000__) || defined(CONFIG_APUS)
#if defined(__mc68000__)
#include <asm/setup.h>
#endif
#include <linux/font.h>
@ -120,7 +120,7 @@ const struct font_desc *get_default_font(int xres, int yres, u32 font_w,
for(i=0; i<num_fonts; i++) {
f = fonts[i];
c = f->pref;
#if defined(__mc68000__) || defined(CONFIG_APUS)
#if defined(__mc68000__)
#ifdef CONFIG_FONT_PEARL_8x8
if (MACH_IS_AMIGA && f->idx == PEARL8x8_IDX)
c = 100;

View file

@ -107,8 +107,6 @@ extern void *empty_zero_page;
/* 64-bit machines, beware! SRB. */
#define SIZEOF_PTR_LOG2 2
#define mm_end_of_chunk(addr, len) 0
extern void kernel_set_cachemode(void *addr, unsigned long size, int cmode);
/*

View file

@ -14,7 +14,7 @@ config DMASOUND_ATARI
config DMASOUND_PAULA
tristate "Amiga DMA sound support"
depends on (AMIGA || APUS) && SOUND
depends on AMIGA && SOUND
select DMASOUND
help
If you want to use the internal audio of your Amiga in Linux, answer

View file

@ -91,10 +91,6 @@ static irqreturn_t AmiInterrupt(int irq, void *dummy);
* power LED are controlled by the same line.
*/
#ifdef CONFIG_APUS
#define mach_heartbeat ppc_md.heartbeat
#endif
static void (*saved_heartbeat)(int) = NULL;
static inline void disable_heartbeat(void)