From 0eaf9f52e94f756147dbfe1faf1f77a02378dbf9 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 23 Jan 2012 13:23:08 +0200 Subject: [PATCH 01/10] OMAPDSS: use sync versions of pm_runtime_put omapdss doesn't work properly on system suspend. The problem seems to be the fact that omapdss uses pm_runtime_put() functions when turning off the hardware, and when system suspend is in process only sync versions are allowed. Using non-sync versions normally and sync versions when suspending would need rather ugly hacks to convey the information of suspending/not-suspending to different functions. Optimally the driver wouldn't even need to care about this, and the PM layer would handle syncing when suspend is in process. This patch changes all omapdss's pm_runtime_put calls to pm_runtime_put_sync. This fixes the suspend problem, and probably the performance penalty of always using sync versions is negligible. Signed-off-by: Tomi Valkeinen Acked-by: Kevin Hilman --- drivers/video/omap2/dss/dispc.c | 2 +- drivers/video/omap2/dss/dsi.c | 2 +- drivers/video/omap2/dss/dss.c | 2 +- drivers/video/omap2/dss/hdmi.c | 2 +- drivers/video/omap2/dss/rfbi.c | 2 +- drivers/video/omap2/dss/venc.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index a5ec7f37c185..e1626a1d5c45 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -401,7 +401,7 @@ void dispc_runtime_put(void) DSSDBG("dispc_runtime_put\n"); - r = pm_runtime_put(&dispc.pdev->dev); + r = pm_runtime_put_sync(&dispc.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 511ae2a7add8..04a89a7bbaf5 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -1079,7 +1079,7 @@ void dsi_runtime_put(struct platform_device *dsidev) DSSDBG("dsi_runtime_put\n"); - r = pm_runtime_put(&dsi->pdev->dev); + r = pm_runtime_put_sync(&dsi->pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 17033457ee89..77c2b5a32b5d 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -720,7 +720,7 @@ void dss_runtime_put(void) DSSDBG("dss_runtime_put\n"); - r = pm_runtime_put(&dss.pdev->dev); + r = pm_runtime_put_sync(&dss.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index b4c270edb915..c39f9c3a92cf 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -176,7 +176,7 @@ static void hdmi_runtime_put(void) DSSDBG("hdmi_runtime_put\n"); - r = pm_runtime_put(&hdmi.pdev->dev); + r = pm_runtime_put_sync(&hdmi.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c index 814bb9500dca..55f398014f33 100644 --- a/drivers/video/omap2/dss/rfbi.c +++ b/drivers/video/omap2/dss/rfbi.c @@ -140,7 +140,7 @@ static void rfbi_runtime_put(void) DSSDBG("rfbi_runtime_put\n"); - r = pm_runtime_put(&rfbi.pdev->dev); + r = pm_runtime_put_sync(&rfbi.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c index b3e9f9091581..5c3d0f901510 100644 --- a/drivers/video/omap2/dss/venc.c +++ b/drivers/video/omap2/dss/venc.c @@ -401,7 +401,7 @@ static void venc_runtime_put(void) DSSDBG("venc_runtime_put\n"); - r = pm_runtime_put(&venc.pdev->dev); + r = pm_runtime_put_sync(&venc.pdev->dev); WARN_ON(r < 0); } From 575753e3bea3b67eef8e454fb87f719e3f7da599 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:04:53 +0200 Subject: [PATCH 02/10] OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios Instead of freeing the GPIOs individually, use gpio_free_array(). Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +-- arch/arm/mach-omap2/board-omap4panda.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index e1fe304ce361..7bbe23ee3e35 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -614,8 +614,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios)); } static struct nokia_dsi_panel_data dsi1_panel = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 3e1c507fb01f..aeb9e88e0a2a 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -497,8 +497,7 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } static struct omap_dss_device omap4_panda_hdmi_device = { From 3932a32fcf5393f8be70ac99dc718ad7ad0a415b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 10:49:38 +0200 Subject: [PATCH 03/10] OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD The GPIO 60 on 4430sdp and Panda is not HPD GPIO, as currently marked in the board files, but CT_CP_HPD, which is used to enable/disable HPD functionality. This patch renames the GPIO. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 4 ++-- arch/arm/mach-omap2/board-omap4panda.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 7bbe23ee3e35..02a4d5f3e8c8 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -52,7 +52,7 @@ #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -596,7 +596,7 @@ static void __init omap_sfh7741prox_init(void) } static struct gpio sdp4430_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, }; diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index aeb9e88e0a2a..844e285b40a3 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -51,7 +51,7 @@ #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ /* wl127x BT, FM, GPS connectivity chip */ @@ -479,7 +479,7 @@ int __init omap4_panda_dvi_init(void) } static struct gpio panda_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, }; From 7bb122d155f742fe2d79849090c825be7b4a247e Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 10:59:00 +0200 Subject: [PATCH 04/10] OMAPDSS: remove wrong HDMI HPD muxing "hdmi_hpd" pin is muxed to INPUT and PULLUP, but the pin is not currently used, and in the future when it is used, the pin is used as a GPIO and is board specific, not an OMAP4 wide thing. So remove the muxing for now. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/display.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index ffd9bd983023..d6e65e29d83d 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -102,12 +102,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) u32 reg; u16 control_i2c_1; - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_cec", OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ omap_mux_init_signal("hdmi_ddc_scl", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", From 78a1ad8f12db70b8b0a4548b90704de08ee216ce Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:02:36 +0200 Subject: [PATCH 05/10] OMAP: 4430SDP/Panda: setup HDMI GPIO muxes The HDMI GPIO pins LS_OE and CT_CP_HPD are not currently configured. This patch configures them as output pins. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +++ arch/arm/mach-omap2/board-omap4panda.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 02a4d5f3e8c8..95766cdfc57f 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -821,6 +821,9 @@ static void omap_4430sdp_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 844e285b40a3..982397269360 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -538,6 +538,9 @@ void omap4_panda_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); } static void __init omap4_panda_init(void) From aa74274b464d4aa24703963ac89a0ee942d5d267 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:05:32 +0200 Subject: [PATCH 06/10] OMAP: 4430SDP/Panda: add HDMI HPD gpio Both Panda and 4430SDP use GPIO 63 as HDMI hot-plug-detect. Configure this GPIO in the board files. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +++ arch/arm/mach-omap2/board-omap4panda.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 95766cdfc57f..cd6ec517a929 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -54,6 +54,7 @@ #define OMAP4_SFH7741_ENABLE_GPIO 188 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -598,6 +599,7 @@ static void __init omap_sfh7741prox_init(void) static struct gpio sdp4430_hdmi_gpios[] = { { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -824,6 +826,7 @@ static void omap_4430sdp_display_init(void) omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 982397269360..e1b196361f95 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -53,6 +53,7 @@ #define GPIO_WIFI_IRQ 53 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static int wl1271_gpios[] = {46, -1, -1}; @@ -481,6 +482,7 @@ int __init omap4_panda_dvi_init(void) static struct gpio panda_hdmi_gpios[] = { { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -541,6 +543,7 @@ void omap4_panda_display_init(void) omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } static void __init omap4_panda_init(void) From c49d005b6cc8491fad5b24f82805be2d6bcbd3dd Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:09:57 +0200 Subject: [PATCH 07/10] OMAPDSS: HDMI: PHY burnout fix A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-4430sdp.c | 5 ++ arch/arm/mach-omap2/board-omap4panda.c | 5 ++ drivers/video/omap2/dss/hdmi.c | 3 + drivers/video/omap2/dss/ti_hdmi.h | 4 ++ drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 68 +++++++++++++++++++++-- include/video/omapdss.h | 5 ++ 6 files changed, 86 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index cd6ec517a929..0ce758edaad2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -732,6 +732,10 @@ static void sdp4430_lcd_init(void) pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); } +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -739,6 +743,7 @@ static struct omap_dss_device sdp4430_hdmi_device = { .platform_enable = sdp4430_panel_enable_hdmi, .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, }; static struct picodlp_panel_data sdp4430_picodlp_pdata = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e1b196361f95..370c4b428888 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -502,6 +502,10 @@ static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device omap4_panda_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -509,6 +513,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = { .platform_enable = omap4_panda_panel_enable_hdmi, .platform_disable = omap4_panda_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, }; static struct omap_dss_device *omap4_panda_dss_devices[] = { diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index c39f9c3a92cf..d7aa3b056529 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -497,6 +497,7 @@ bool omapdss_hdmi_detect(void) int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) { + struct omap_dss_hdmi_data *priv = dssdev->data; int r = 0; DSSDBG("ENTER hdmi_display_enable\n"); @@ -509,6 +510,8 @@ int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) goto err0; } + hdmi.ip_data.hpd_gpio = priv->hpd_gpio; + r = omap_dss_start_device(dssdev); if (r) { DSSERR("failed to start device\n"); diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h index 7503f7f619a7..50dadba5070a 100644 --- a/drivers/video/omap2/dss/ti_hdmi.h +++ b/drivers/video/omap2/dss/ti_hdmi.h @@ -126,6 +126,10 @@ struct hdmi_ip_data { const struct ti_hdmi_ip_ops *ops; struct hdmi_config cfg; struct hdmi_pll_info pll_data; + + /* ti_hdmi_4xxx_ip private data. These should be in a separate struct */ + int hpd_gpio; + bool phy_tx_enabled; }; int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data); void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data); diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c index 9af81f18f163..2d72334ca3da 100644 --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "ti_hdmi_4xxx_ip.h" #include "dss.h" @@ -223,6 +224,49 @@ void ti_hdmi_4xxx_pll_disable(struct hdmi_ip_data *ip_data) hdmi_set_pll_pwr(ip_data, HDMI_PLLPWRCMD_ALLOFF); } +static int hdmi_check_hpd_state(struct hdmi_ip_data *ip_data) +{ + unsigned long flags; + bool hpd; + int r; + /* this should be in ti_hdmi_4xxx_ip private data */ + static DEFINE_SPINLOCK(phy_tx_lock); + + spin_lock_irqsave(&phy_tx_lock, flags); + + hpd = gpio_get_value(ip_data->hpd_gpio); + + if (hpd == ip_data->phy_tx_enabled) { + spin_unlock_irqrestore(&phy_tx_lock, flags); + return 0; + } + + if (hpd) + r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON); + else + r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_LDOON); + + if (r) { + DSSERR("Failed to %s PHY TX power\n", + hpd ? "enable" : "disable"); + goto err; + } + + ip_data->phy_tx_enabled = hpd; +err: + spin_unlock_irqrestore(&phy_tx_lock, flags); + return r; +} + +static irqreturn_t hpd_irq_handler(int irq, void *data) +{ + struct hdmi_ip_data *ip_data = data; + + hdmi_check_hpd_state(ip_data); + + return IRQ_HANDLED; +} + int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) { u16 r = 0; @@ -232,10 +276,6 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) if (r) return r; - r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON); - if (r) - return r; - /* * Read address 0 in order to get the SCP reset done completed * Dummy access performed to make sure reset is done @@ -257,12 +297,32 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) /* Write to phy address 3 to change the polarity control */ REG_FLD_MOD(phy_base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27); + r = request_threaded_irq(gpio_to_irq(ip_data->hpd_gpio), + NULL, hpd_irq_handler, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "hpd", ip_data); + if (r) { + DSSERR("HPD IRQ request failed\n"); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + return r; + } + + r = hdmi_check_hpd_state(ip_data); + if (r) { + free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + return r; + } + return 0; } void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data) { + free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + ip_data->phy_tx_enabled = false; } static int hdmi_core_ddc_init(struct hdmi_ip_data *ip_data) diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 062b3b24ff10..483f67caa7ad 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -590,6 +590,11 @@ struct omap_dss_device { int (*get_backlight)(struct omap_dss_device *dssdev); }; +struct omap_dss_hdmi_data +{ + int hpd_gpio; +}; + struct omap_dss_driver { struct device_driver driver; From f7f5ef0afdcca69fb02ded1763c28eca74e6b54d Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sat, 28 Jan 2012 19:35:24 +0000 Subject: [PATCH 08/10] drivers/video: compile fixes for fsl-diu-fb.c Fix a compiler errors introduced in: commit ddd3d905436b572ebadc09dcf2d12ca5b37020a0 Author: Timur Tabi drivers/video: fsl-diu-fb: merge all allocated data into one block Signed-off-by: Michael Neuling Acked-by: Timur Tabi Signed-off-by: Florian Tobias Schandinat --- drivers/video/fsl-diu-fb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index acf292bfba02..6af3f16754f0 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -1432,7 +1432,7 @@ static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state) struct fsl_diu_data *data; data = dev_get_drvdata(&ofdev->dev); - disable_lcdc(data->fsl_diu_info[0]); + disable_lcdc(data->fsl_diu_info); return 0; } @@ -1442,7 +1442,7 @@ static int fsl_diu_resume(struct platform_device *ofdev) struct fsl_diu_data *data; data = dev_get_drvdata(&ofdev->dev); - enable_lcdc(data->fsl_diu_info[0]); + enable_lcdc(data->fsl_diu_info); return 0; } From 7bc1dc7174d06104fde069a3b5aef1c5b902a5c9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 27 Jan 2012 15:58:33 +0300 Subject: [PATCH 09/10] intelfb: remove some dead code The goto on the line before means the return is unreachable. The goto also returns -ENODEV so no changes are needed there. Signed-off-by: Dan Carpenter Signed-off-by: Florian Tobias Schandinat --- drivers/video/intelfb/intelfbdrv.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index 5ba399991050..a5947c94145f 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -529,7 +529,6 @@ static int __devinit intelfb_pci_register(struct pci_dev *pdev, if (fb_alloc_cmap(&info->cmap, 256, 1) < 0) { ERR_MSG("Could not allocate cmap for intelfb_info.\n"); goto err_out_cmap; - return -ENODEV; } dinfo = info->par; From 9f1065032ceb7e86c7c9f16bb86518857e88a172 Mon Sep 17 00:00:00 2001 From: Hubert Feurstein Date: Mon, 9 Jan 2012 17:23:57 +0100 Subject: [PATCH 10/10] atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume An error was existing in the saving of CONTRAST_CTR register across suspend/resume. Signed-off-by: Hubert Feurstein Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable Signed-off-by: Florian Tobias Schandinat --- drivers/video/atmel_lcdfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 0d7b20d4285d..e40c00f2c2ba 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -1108,7 +1108,7 @@ static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg) */ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL); - sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); + sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_CTR); lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0); if (sinfo->atmel_lcdfb_power_control) sinfo->atmel_lcdfb_power_control(0);