[SCSI] libsas: use ->set_dmamode to notify lldds of NCQ parameters

sas_discover_sata() notifies lldds of sata devices twice.  Once to allow
the 'identify' to be sent, and a second time to allow aic94xx (the only
libsas driver that cares about sata_dev.identify) to setup NCQ
parameters before the device becomes known to the midlayer.  Replace
this double notification and intervening 'identify' with an explicit
->lldd_ata_set_dmamode notification.  With this change all ata internal
commands are issued by libata, so we no longer need sas_issue_ata_cmd().

The data from the identify command only needs to be cached in one
location so ata_device.id replaces domain_device.sata_dev.identify.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
This commit is contained in:
Dan Williams 2011-11-17 17:59:52 -08:00 committed by James Bottomley
parent 87c8331fcf
commit b91bb29618
6 changed files with 49 additions and 326 deletions

View file

@ -80,6 +80,8 @@ void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id);
int asd_execute_task(struct sas_task *, int num, gfp_t gfp_flags);
void asd_set_dmamode(struct domain_device *dev);
/* ---------- TMFs ---------- */
int asd_abort_task(struct sas_task *);
int asd_abort_task_set(struct domain_device *, u8 *lun);

View file

@ -109,26 +109,37 @@ static int asd_init_sata_tag_ddb(struct domain_device *dev)
return 0;
}
static int asd_init_sata(struct domain_device *dev)
void asd_set_dmamode(struct domain_device *dev)
{
struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
struct ata_device *ata_dev = sas_to_ata_dev(dev);
int ddb = (int) (unsigned long) dev->lldd_dev;
u32 qdepth = 0;
int res = 0;
asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
if ((dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) &&
dev->sata_dev.identify_device &&
dev->sata_dev.identify_device[10] != 0) {
u16 w75 = le16_to_cpu(dev->sata_dev.identify_device[75]);
u16 w76 = le16_to_cpu(dev->sata_dev.identify_device[76]);
if (w76 & 0x100) /* NCQ? */
qdepth = (w75 & 0x1F) + 1;
if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) {
if (ata_id_has_ncq(ata_dev->id))
qdepth = ata_id_queue_depth(ata_dev->id);
asd_ddbsite_write_dword(asd_ha, ddb, SATA_TAG_ALLOC_MASK,
(1ULL<<qdepth)-1);
asd_ddbsite_write_byte(asd_ha, ddb, NUM_SATA_TAGS, qdepth);
}
if (qdepth > 0)
if (asd_init_sata_tag_ddb(dev) != 0) {
unsigned long flags;
spin_lock_irqsave(dev->sata_dev.ap->lock, flags);
ata_dev->flags |= ATA_DFLAG_NCQ_OFF;
spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags);
}
}
static int asd_init_sata(struct domain_device *dev)
{
struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
int ddb = (int) (unsigned long) dev->lldd_dev;
asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM ||
dev->dev_type == SATA_PM_PORT) {
struct dev_to_host_fis *fis = (struct dev_to_host_fis *)
@ -136,9 +147,8 @@ static int asd_init_sata(struct domain_device *dev)
asd_ddbsite_write_byte(asd_ha, ddb, SATA_STATUS, fis->status);
}
asd_ddbsite_write_word(asd_ha, ddb, NCQ_DATA_SCB_PTR, 0xFFFF);
if (qdepth > 0)
res = asd_init_sata_tag_ddb(dev);
return res;
return 0;
}
static int asd_init_target_ddb(struct domain_device *dev)

View file

@ -1009,6 +1009,8 @@ static struct sas_domain_function_template aic94xx_transport_functions = {
.lldd_clear_nexus_ha = asd_clear_nexus_ha,
.lldd_control_phy = asd_control_phy,
.lldd_ata_set_dmamode = asd_set_dmamode,
};
static const struct pci_device_id aic94xx_pci_table[] __devinitdata = {

View file

@ -367,6 +367,17 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc)
}
}
static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev)
{
struct domain_device *dev = ap->private_data;
struct sas_internal *i =
to_sas_internal(dev->port->ha->core.shost->transportt);
if (i->dft->lldd_ata_set_dmamode)
i->dft->lldd_ata_set_dmamode(dev);
}
static struct ata_port_operations sas_sata_ops = {
.prereset = ata_std_prereset,
.softreset = sas_ata_soft_reset,
@ -380,6 +391,7 @@ static struct ata_port_operations sas_sata_ops = {
.qc_fill_rtf = sas_ata_qc_fill_rtf,
.port_start = ata_sas_port_start,
.port_stop = ata_sas_port_stop,
.set_dmamode = sas_ata_set_dmamode,
};
static struct ata_port_info sata_port_info = {
@ -442,163 +454,6 @@ void sas_ata_task_abort(struct sas_task *task)
complete(waiting);
}
static void sas_task_timedout(unsigned long _task)
{
struct sas_task *task = (void *) _task;
unsigned long flags;
spin_lock_irqsave(&task->task_state_lock, flags);
if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
task->task_state_flags |= SAS_TASK_STATE_ABORTED;
spin_unlock_irqrestore(&task->task_state_lock, flags);
complete(&task->completion);
}
static void sas_disc_task_done(struct sas_task *task)
{
if (!del_timer(&task->timer))
return;
complete(&task->completion);
}
#define SAS_DEV_TIMEOUT 10
/**
* sas_execute_task -- Basic task processing for discovery
* @task: the task to be executed
* @buffer: pointer to buffer to do I/O
* @size: size of @buffer
* @dma_dir: DMA direction. DMA_xxx
*/
static int sas_execute_task(struct sas_task *task, void *buffer, int size,
enum dma_data_direction dma_dir)
{
int res = 0;
struct scatterlist *scatter = NULL;
struct task_status_struct *ts = &task->task_status;
int num_scatter = 0;
int retries = 0;
struct sas_internal *i =
to_sas_internal(task->dev->port->ha->core.shost->transportt);
if (dma_dir != DMA_NONE) {
scatter = kzalloc(sizeof(*scatter), GFP_KERNEL);
if (!scatter)
goto out;
sg_init_one(scatter, buffer, size);
num_scatter = 1;
}
task->task_proto = task->dev->tproto;
task->scatter = scatter;
task->num_scatter = num_scatter;
task->total_xfer_len = size;
task->data_dir = dma_dir;
task->task_done = sas_disc_task_done;
if (dma_dir != DMA_NONE &&
sas_protocol_ata(task->task_proto)) {
task->num_scatter = dma_map_sg(task->dev->port->ha->dev,
task->scatter,
task->num_scatter,
task->data_dir);
}
for (retries = 0; retries < 5; retries++) {
task->task_state_flags = SAS_TASK_STATE_PENDING;
init_completion(&task->completion);
task->timer.data = (unsigned long) task;
task->timer.function = sas_task_timedout;
task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ;
add_timer(&task->timer);
res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
if (res) {
del_timer(&task->timer);
SAS_DPRINTK("executing SAS discovery task failed:%d\n",
res);
goto ex_err;
}
wait_for_completion(&task->completion);
res = -ECOMM;
if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
int res2;
SAS_DPRINTK("task aborted, flags:0x%x\n",
task->task_state_flags);
res2 = i->dft->lldd_abort_task(task);
SAS_DPRINTK("came back from abort task\n");
if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
if (res2 == TMF_RESP_FUNC_COMPLETE)
continue; /* Retry the task */
else
goto ex_err;
}
}
if (task->task_status.stat == SAM_STAT_BUSY ||
task->task_status.stat == SAM_STAT_TASK_SET_FULL ||
task->task_status.stat == SAS_QUEUE_FULL) {
SAS_DPRINTK("task: q busy, sleeping...\n");
schedule_timeout_interruptible(HZ);
} else if (task->task_status.stat == SAM_STAT_CHECK_CONDITION) {
struct scsi_sense_hdr shdr;
if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size,
&shdr)) {
SAS_DPRINTK("couldn't normalize sense\n");
continue;
}
if ((shdr.sense_key == 6 && shdr.asc == 0x29) ||
(shdr.sense_key == 2 && shdr.asc == 4 &&
shdr.ascq == 1)) {
SAS_DPRINTK("device %016llx LUN: %016llx "
"powering up or not ready yet, "
"sleeping...\n",
SAS_ADDR(task->dev->sas_addr),
SAS_ADDR(task->ssp_task.LUN));
schedule_timeout_interruptible(5*HZ);
} else if (shdr.sense_key == 1) {
res = 0;
break;
} else if (shdr.sense_key == 5) {
break;
} else {
SAS_DPRINTK("dev %016llx LUN: %016llx "
"sense key:0x%x ASC:0x%x ASCQ:0x%x"
"\n",
SAS_ADDR(task->dev->sas_addr),
SAS_ADDR(task->ssp_task.LUN),
shdr.sense_key,
shdr.asc, shdr.ascq);
}
} else if (task->task_status.resp != SAS_TASK_COMPLETE ||
task->task_status.stat != SAM_STAT_GOOD) {
SAS_DPRINTK("task finished with resp:0x%x, "
"stat:0x%x\n",
task->task_status.resp,
task->task_status.stat);
goto ex_err;
} else {
res = 0;
break;
}
}
ex_err:
if (dma_dir != DMA_NONE) {
if (sas_protocol_ata(task->task_proto))
dma_unmap_sg(task->dev->port->ha->dev,
task->scatter, task->num_scatter,
task->data_dir);
kfree(scatter);
}
out:
return res;
}
/* ---------- SATA ---------- */
static void sas_get_ata_command_set(struct domain_device *dev)
{
struct dev_to_host_fis *fis =
@ -642,122 +497,6 @@ static void sas_get_ata_command_set(struct domain_device *dev)
dev->sata_dev.command_set = ATAPI_COMMAND_SET;
}
/**
* sas_issue_ata_cmd -- Basic SATA command processing for discovery
* @dev: the device to send the command to
* @command: the command register
* @features: the features register
* @buffer: pointer to buffer to do I/O
* @size: size of @buffer
* @dma_dir: DMA direction. DMA_xxx
*/
static int sas_issue_ata_cmd(struct domain_device *dev, u8 command,
u8 features, void *buffer, int size,
enum dma_data_direction dma_dir)
{
int res = 0;
struct sas_task *task;
struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *)
&dev->frame_rcvd[0];
res = -ENOMEM;
task = sas_alloc_task(GFP_KERNEL);
if (!task)
goto out;
task->dev = dev;
task->ata_task.fis.fis_type = 0x27;
task->ata_task.fis.command = command;
task->ata_task.fis.features = features;
task->ata_task.fis.device = d2h_fis->device;
task->ata_task.retry_count = 1;
res = sas_execute_task(task, buffer, size, dma_dir);
sas_free_task(task);
out:
return res;
}
#define ATA_IDENTIFY_DEV 0xEC
#define ATA_IDENTIFY_PACKET_DEV 0xA1
#define ATA_SET_FEATURES 0xEF
#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07
/**
* sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV)
* @dev: STP/SATA device of interest (ATA/ATAPI)
*
* The LLDD has already been notified of this device, so that we can
* send FISes to it. Here we try to get IDENTIFY DEVICE or IDENTIFY
* PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its
* performance for this device.
*/
static int sas_discover_sata_dev(struct domain_device *dev)
{
int res;
__le16 *identify_x;
u8 command;
identify_x = kzalloc(512, GFP_KERNEL);
if (!identify_x)
return -ENOMEM;
if (dev->sata_dev.command_set == ATA_COMMAND_SET) {
dev->sata_dev.identify_device = identify_x;
command = ATA_IDENTIFY_DEV;
} else {
dev->sata_dev.identify_packet_device = identify_x;
command = ATA_IDENTIFY_PACKET_DEV;
}
res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
DMA_FROM_DEVICE);
if (res)
goto out_err;
/* lives on the media? */
if (le16_to_cpu(identify_x[0]) & 4) {
/* incomplete response */
SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to "
"dev %llx\n", SAS_ADDR(dev->sas_addr));
if (!(identify_x[83] & cpu_to_le16(1<<6)))
goto cont1;
res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES,
ATA_FEATURE_PUP_STBY_SPIN_UP,
NULL, 0, DMA_NONE);
if (res)
goto cont1;
schedule_timeout_interruptible(5*HZ); /* More time? */
res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
DMA_FROM_DEVICE);
if (res)
goto out_err;
}
cont1:
/* XXX Hint: register this SATA device with SATL.
When this returns, dev->sata_dev->lu is alive and
present.
sas_satl_register_dev(dev);
*/
sas_fill_in_rphy(dev, dev->rphy);
return 0;
out_err:
dev->sata_dev.identify_packet_device = NULL;
dev->sata_dev.identify_device = NULL;
kfree(identify_x);
return res;
}
static int sas_discover_sata_pm(struct domain_device *dev)
{
return -ENODEV;
}
void sas_probe_sata(struct work_struct *work)
{
struct domain_device *dev, *n;
@ -791,49 +530,26 @@ void sas_probe_sata(struct work_struct *work)
* sas_discover_sata -- discover an STP/SATA domain device
* @dev: pointer to struct domain_device of interest
*
* First we notify the LLDD of this device, so we can send frames to
* it. Then depending on the type of device we call the appropriate
* discover functions. Once device discover is done, we notify the
* LLDD so that it can fine-tune its parameters for the device, by
* removing it and then adding it. That is, the second time around,
* the driver would have certain fields, that it is looking at, set.
* Finally we initialize the kobj so that the device can be added to
* the system at registration time. Devices directly attached to a HA
* port, have no parents. All other devices do, and should have their
* "parent" pointer set appropriately before calling this function.
* Devices directly attached to a HA port, have no parents. All other
* devices do, and should have their "parent" pointer set appropriately
* before calling this function.
*/
int sas_discover_sata(struct domain_device *dev)
{
int res;
if (dev->dev_type == SATA_PM)
return -ENODEV;
sas_get_ata_command_set(dev);
res = sas_notify_lldd_dev_found(dev);
if (res)
return res;
switch (dev->dev_type) {
case SATA_DEV:
res = sas_discover_sata_dev(dev);
break;
case SATA_PM:
res = sas_discover_sata_pm(dev);
break;
default:
break;
}
sas_notify_lldd_dev_gone(dev);
if (res)
return res;
sas_fill_in_rphy(dev, dev->rphy);
res = sas_notify_lldd_dev_found(dev);
if (res)
return res;
sas_discover_event(dev->port, DISCE_PROBE);
return res;
return 0;
}
void sas_ata_strategy_handler(struct Scsi_Host *shost)

View file

@ -237,11 +237,6 @@ void sas_free_device(struct kref *kref)
if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV)
kfree(dev->ex_dev.ex_phy);
if (dev_is_sata(dev)) {
kfree(dev->sata_dev.identify_device);
kfree(dev->sata_dev.identify_packet_device);
}
kfree(dev);
}

View file

@ -164,9 +164,6 @@ enum ata_command_set {
struct sata_device {
enum ata_command_set command_set;
struct smp_resp rps_resp; /* report_phy_sata_resp */
__le16 *identify_device;
__le16 *identify_packet_device;
u8 port_no; /* port number, if this is a PM (Port) */
struct list_head children; /* PM Ports if this is a PM */
@ -609,6 +606,7 @@ struct sas_domain_function_template {
int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
int (*lldd_I_T_nexus_reset)(struct domain_device *);
int (*lldd_ata_soft_reset)(struct domain_device *);
void (*lldd_ata_set_dmamode)(struct domain_device *);
int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
int (*lldd_query_task)(struct sas_task *);