HID: Documentation for hidraw

Documenation for the hidraw driver, with sample program.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Alan Ott 2011-03-19 20:29:44 -04:00 committed by Jiri Kosina
parent 99759619b2
commit c54ea4918c
5 changed files with 301 additions and 1 deletions

View File

@ -0,0 +1,119 @@
HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices
==================================================================
The hidraw driver provides a raw interface to USB and Bluetooth Human
Interface Devices (HIDs). It differs from hiddev in that reports sent and
received are not parsed by the HID parser, but are sent to and received from
the device unmodified.
Hidraw should be used if the userspace application knows exactly how to
communicate with the hardware device, and is able to construct the HID
reports manually. This is often the case when making userspace drivers for
custom HID devices.
Hidraw is also useful for communicating with non-conformant HID devices
which send and receive data in a way that is inconsistent with their report
descriptors. Because hiddev parses reports which are sent and received
through it, checking them against the device's report descriptor, such
communication with these non-conformant devices is impossible using hiddev.
Hidraw is the only alternative, short of writing a custom kernel driver, for
these non-conformant devices.
A benefit of hidraw is that its use by userspace applications is independent
of the underlying hardware type. Currently, Hidraw is implemented for USB
and Bluetooth. In the future, as new hardware bus types are developed which
use the HID specification, hidraw will be expanded to add support for these
new bus types.
Hidraw uses a dynamic major number, meaning that udev should be relied on to
create hidraw device nodes. Udev will typically create the device nodes
directly under /dev (eg: /dev/hidraw0). As this location is distribution-
and udev rule-dependent, applications should use libudev to locate hidraw
devices attached to the system. There is a tutorial on libudev with a
working example at:
http://www.signal11.us/oss/udev/
The HIDRAW API
---------------
read()
-------
read() will read a queued report received from the HID device. On USB
devices, the reports read using read() are the reports sent from the device
on the INTERRUPT IN endpoint. By default, read() will block until there is
a report available to be read. read() can be made non-blocking, by passing
the O_NONBLOCK flag to open(), or by setting the O_NONBLOCK flag using
fcntl().
On a device which uses numbered reports, the first byte of the returned data
will be the report number; the report data follows, beginning in the second
byte. For devices which do not use numbered reports, the report data
will begin at the first byte.
write()
--------
The write() function will write a report to the device. For USB devices, if
the device has an INTERRUPT OUT endpoint, the report will be sent on that
endpoint. If it does not, the report will be sent over the control endpoint,
using a SET_REPORT transfer.
The first byte of the buffer passed to write() should be set to the report
number. If the device does not use numbered reports, the first byte should
be set to 0. The report data itself should begin at the second byte.
ioctl()
--------
Hidraw supports the following ioctls:
HIDIOCGRDESCSIZE: Get Report Descriptor Size
This ioctl will get the size of the device's report descriptor.
HIDIOCGRDESC: Get Report Descriptor
This ioctl returns the device's report descriptor using a
hidraw_report_descriptor struct. Make sure to set the size field of the
hidraw_report_descriptor struct to the size returned from HIDIOCGRDESCSIZE.
HIDIOCGRAWINFO: Get Raw Info
This ioctl will return a hidraw_devinfo struct containing the bus type, the
vendor ID (VID), and product ID (PID) of the device. The bus type can be one
of:
BUS_USB
BUS_HIL
BUS_BLUETOOTH
BUS_VIRTUAL
which are defined in linux/input.h.
HIDIOCGRAWNAME(len): Get Raw Name
This ioctl returns a string containing the vendor and product strings of
the device. The returned string is Unicode, UTF-8 encoded.
HIDIOCGRAWPHYS(len): Get Physical Address
This ioctl returns a string representing the physical address of the device.
For USB devices, the string contains the physical path to the device (the
USB controller, hubs, ports, etc). For Bluetooth devices, the string
contains the hardware (MAC) address of the device.
HIDIOCSFEATURE(len): Send a Feature Report
This ioctl will send a feature report to the device. Per the HID
specification, feature reports are always sent using the control endpoint.
Set the first byte of the supplied buffer to the report number. For devices
which do not use numbered reports, set the first byte to 0. The report data
begins in the second byte. Make sure to set len accordingly, to one more
than the length of the report (to account for the report number).
HIDIOCGFEATURE(len): Get a Feature Report
This ioctl will request a feature report from the device using the control
endpoint. The first byte of the supplied buffer should be set to the report
number of the requested report. For devices which do not use numbered
reports, set the first byte to 0. The report will be returned starting at
the first byte of the buffer (ie: the report number is not returned).
Example
---------
In samples/, find hid-example.c, which shows examples of read(), write(),
and all the ioctls for hidraw. The code may be used by anyone for any
purpose, and can serve as a starting point for developing applications using
hidraw.
Document by:
Alan Ott <alan@signal11.us>, Signal 11 Software

View File

@ -61,4 +61,10 @@ config SAMPLE_KDB
Build an example of how to dynamically add the hello
command to the kdb shell.
config SAMPLE_HIDRAW
tristate "Build simple hidraw example"
depends on HIDRAW
help
Build an example of how to use hidraw from userspace.
endif # SAMPLES

View File

@ -1,4 +1,4 @@
# Makefile for Linux samples code
obj-$(CONFIG_SAMPLES) += kobject/ kprobes/ tracepoints/ trace_events/ \
hw_breakpoint/ kfifo/ kdb/
hw_breakpoint/ kfifo/ kdb/ hidraw/

8
samples/hidraw/Makefile Normal file
View File

@ -0,0 +1,8 @@
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
hostprogs-y := hid-example
# Tell kbuild to always build the programs
always := $(hostprogs-y)

View File

@ -0,0 +1,167 @@
/*
* Hidraw Userspace Example
*
* Copyright (c) 2010 Alan Ott <alan@signal11.us>
* Copyright (c) 2010 Signal 11 Software
*
* The code may be used by anyone for any purpose,
* and can serve as a starting point for developing
* applications using hidraw.
*/
/* Linux */
#include <linux/types.h>
#include <linux/input.h>
#include <linux/hidraw.h>
/* Unix */
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
/* C */
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <errno.h>
const char *bus_str(int bus);
int main(int argc, char **argv)
{
int fd;
int i, res, desc_size = 0;
char buf[256];
struct hidraw_report_descriptor rpt_desc;
struct hidraw_devinfo info;
/* Open the Device with non-blocking reads. In real life,
don't use a hard coded path; use libudev instead. */
fd = open("/dev/hidraw0", O_RDWR|O_NONBLOCK);
if (fd < 0) {
perror("Unable to open device");
return 1;
}
memset(&rpt_desc, 0x0, sizeof(rpt_desc));
memset(&info, 0x0, sizeof(info));
memset(buf, 0x0, sizeof(buf));
/* Get Report Descriptor Size */
res = ioctl(fd, HIDIOCGRDESCSIZE, &desc_size);
if (res < 0)
perror("HIDIOCGRDESCSIZE");
else
printf("Report Descriptor Size: %d\n", desc_size);
/* Get Report Descriptor */
rpt_desc.size = desc_size;
res = ioctl(fd, HIDIOCGRDESC, &rpt_desc);
if (res < 0) {
perror("HIDIOCGRDESC");
} else {
printf("Report Descriptor:\n");
for (i = 0; i < rpt_desc.size; i++)
printf("%hhx ", rpt_desc.value[i]);
puts("\n");
}
/* Get Raw Name */
res = ioctl(fd, HIDIOCGRAWNAME(256), buf);
if (res < 0)
perror("HIDIOCGRAWNAME");
else
printf("Raw Name: %s\n", buf);
/* Get Physical Location */
res = ioctl(fd, HIDIOCGRAWPHYS(256), buf);
if (res < 0)
perror("HIDIOCGRAWPHYS");
else
printf("Raw Phys: %s\n", buf);
/* Get Raw Info */
res = ioctl(fd, HIDIOCGRAWINFO, &info);
if (res < 0) {
perror("HIDIOCGRAWINFO");
} else {
printf("Raw Info:\n");
printf("\tbustype: %d (%s)\n",
info.bustype, bus_str(info.bustype));
printf("\tvendor: 0x%04hx\n", info.vendor);
printf("\tproduct: 0x%04hx\n", info.product);
}
/* Set Feature */
buf[0] = 0x9; /* Report Number */
buf[1] = 0xff;
buf[2] = 0xff;
buf[3] = 0xff;
res = ioctl(fd, HIDIOCSFEATURE(4), buf);
if (res < 0)
perror("HIDIOCSFEATURE");
else
printf("ioctl HIDIOCGFEATURE returned: %d\n", res);
/* Get Feature */
buf[0] = 0x9; /* Report Number */
res = ioctl(fd, HIDIOCGFEATURE(256), buf);
if (res < 0) {
perror("HIDIOCGFEATURE");
} else {
printf("ioctl HIDIOCGFEATURE returned: %d\n", res);
printf("Report data (not containing the report number):\n\t");
for (i = 0; i < res; i++)
printf("%hhx ", buf[i]);
puts("\n");
}
/* Send a Report to the Device */
buf[0] = 0x1; /* Report Number */
buf[1] = 0x77;
res = write(fd, buf, 2);
if (res < 0) {
printf("Error: %d\n", errno);
perror("write");
} else {
printf("write() wrote %d bytes\n", res);
}
/* Get a report from the device */
res = read(fd, buf, 16);
if (res < 0) {
perror("read");
} else {
printf("read() read %d bytes:\n\t", res);
for (i = 0; i < res; i++)
printf("%hhx ", buf[i]);
puts("\n");
}
close(fd);
return 0;
}
const char *
bus_str(int bus)
{
switch (bus) {
case BUS_USB:
return "USB";
break;
case BUS_HIL:
return "HIL";
break;
case BUS_BLUETOOTH:
return "Bluetooth";
break;
case BUS_VIRTUAL:
return "Virtual";
break;
default:
return "Other";
break;
}
}