mfd: rtsx: Support RTS5227

Support new model RTS5227.

Signed-off-by: Roger Tseng <rogerable@realtek.com>
Reviewed-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Roger Tseng 2013-02-04 15:45:59 +08:00 committed by Samuel Ortiz
parent 88a7ee37f3
commit e12379320b
5 changed files with 246 additions and 1 deletions

View file

@ -9,7 +9,7 @@ obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o
rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o
obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o

234
drivers/mfd/rts5227.c Normal file
View file

@ -0,0 +1,234 @@
/* Driver for Realtek PCI-Express card reader
*
* Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Author:
* Wei WANG <wei_wang@realsil.com.cn>
* No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
*
* Roger Tseng <rogerable@realtek.com>
* No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/mfd/rtsx_pci.h>
#include "rtsx_pcr.h"
static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
{
u16 cap;
rtsx_pci_init_cmd(pcr);
/* Configure GPIO as output */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
/* Switch LDO3318 source from DV33 to card_3v3 */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
/* LED shine disabled, set initial shine cycle period */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
/* Configure LTR */
pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &cap);
if (cap & PCI_EXP_LTR_EN)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LTR_CTL, 0xFF, 0xA3);
/* Configure OBFF */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OBFF_CFG, 0x03, 0x03);
/* Configure force_clock_req
* Maybe We should define 0xFF03 as some name
*/
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFF03, 0x08, 0x08);
/* Correct driving */
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
SD30_CLK_DRIVE_SEL, 0xFF, 0x96);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
SD30_CMD_DRIVE_SEL, 0xFF, 0x96);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
SD30_DAT_DRIVE_SEL, 0xFF, 0x96);
return rtsx_pci_send_cmd(pcr, 100);
}
static int rts5227_optimize_phy(struct rtsx_pcr *pcr)
{
/* Optimize RX sensitivity */
return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
}
static int rts5227_turn_on_led(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
}
static int rts5227_turn_off_led(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
}
static int rts5227_enable_auto_blink(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
}
static int rts5227_disable_auto_blink(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
}
static int rts5227_card_power_on(struct rtsx_pcr *pcr, int card)
{
int err;
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
SD_POWER_MASK, SD_PARTIAL_POWER_ON);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
LDO3318_PWR_MASK, 0x02);
err = rtsx_pci_send_cmd(pcr, 100);
if (err < 0)
return err;
/* To avoid too large in-rush current */
udelay(150);
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
SD_POWER_MASK, SD_POWER_ON);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
LDO3318_PWR_MASK, 0x06);
err = rtsx_pci_send_cmd(pcr, 100);
if (err < 0)
return err;
return 0;
}
static int rts5227_card_power_off(struct rtsx_pcr *pcr, int card)
{
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
SD_POWER_MASK | PMOS_STRG_MASK,
SD_POWER_OFF | PMOS_STRG_400mA);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
LDO3318_PWR_MASK, 0X00);
return rtsx_pci_send_cmd(pcr, 100);
}
static int rts5227_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
{
int err;
u8 drive_sel;
if (voltage == OUTPUT_3V3) {
err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
if (err < 0)
return err;
drive_sel = 0x96;
} else if (voltage == OUTPUT_1V8) {
err = rtsx_pci_write_phy_register(pcr, 0x11, 0x3C02);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C80 | 0x24);
if (err < 0)
return err;
drive_sel = 0xB3;
} else {
return -EINVAL;
}
/* set pad drive */
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL,
0xFF, drive_sel);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL,
0xFF, drive_sel);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL,
0xFF, drive_sel);
return rtsx_pci_send_cmd(pcr, 100);
}
static const struct pcr_ops rts5227_pcr_ops = {
.extra_init_hw = rts5227_extra_init_hw,
.optimize_phy = rts5227_optimize_phy,
.turn_on_led = rts5227_turn_on_led,
.turn_off_led = rts5227_turn_off_led,
.enable_auto_blink = rts5227_enable_auto_blink,
.disable_auto_blink = rts5227_disable_auto_blink,
.card_power_on = rts5227_card_power_on,
.card_power_off = rts5227_card_power_off,
.switch_output_voltage = rts5227_switch_output_voltage,
.cd_deglitch = NULL,
.conv_clk_and_div_n = NULL,
};
/* SD Pull Control Enable:
* SD_DAT[3:0] ==> pull up
* SD_CD ==> pull up
* SD_WP ==> pull up
* SD_CMD ==> pull up
* SD_CLK ==> pull down
*/
static const u32 rts5227_sd_pull_ctl_enable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
0,
};
/* SD Pull Control Disable:
* SD_DAT[3:0] ==> pull down
* SD_CD ==> pull up
* SD_WP ==> pull down
* SD_CMD ==> pull down
* SD_CLK ==> pull down
*/
static const u32 rts5227_sd_pull_ctl_disable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
0,
};
/* MS Pull Control Enable:
* MS CD ==> pull up
* others ==> pull down
*/
static const u32 rts5227_ms_pull_ctl_enable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
0,
};
/* MS Pull Control Disable:
* MS CD ==> pull up
* others ==> pull down
*/
static const u32 rts5227_ms_pull_ctl_disable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
0,
};
void rts5227_init_params(struct rtsx_pcr *pcr)
{
pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
pcr->num_slots = 2;
pcr->ops = &rts5227_pcr_ops;
pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl;
pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl;
pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl;
pcr->ms_pull_ctl_disable_tbl = rts5227_ms_pull_ctl_disable_tbl;
}

View file

@ -55,6 +55,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = {
{ PCI_DEVICE(0x10EC, 0x5209), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ 0, }
};
@ -998,6 +999,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
case 0x5289:
rtl8411_init_params(pcr);
break;
case 0x5227:
rts5227_init_params(pcr);
break;
}
dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n",

View file

@ -31,5 +31,6 @@
void rts5209_init_params(struct rtsx_pcr *pcr);
void rts5229_init_params(struct rtsx_pcr *pcr);
void rtl8411_init_params(struct rtsx_pcr *pcr);
void rts5227_init_params(struct rtsx_pcr *pcr);
#endif

View file

@ -581,8 +581,11 @@
#define CARD_GPIO_DIR 0xFD57
#define CARD_GPIO 0xFD58
#define CARD_DATA_SOURCE 0xFD5B
#define SD30_CLK_DRIVE_SEL 0xFD5A
#define CARD_SELECT 0xFD5C
#define SD30_DRIVE_SEL 0xFD5E
#define SD30_CMD_DRIVE_SEL 0xFD5E
#define SD30_DAT_DRIVE_SEL 0xFD5F
#define CARD_CLK_EN 0xFD69
#define SDIO_CTRL 0xFD6B
#define CD_PAD_CTL 0xFD73
@ -655,6 +658,8 @@
#define MSGTXDATA3 0xFE47
#define MSGTXCTL 0xFE48
#define PETXCFG 0xFE49
#define LTR_CTL 0xFE4A
#define OBFF_CFG 0xFE4C
#define CDRESUMECTL 0xFE52
#define WAKE_SEL_CTL 0xFE54