Including the following patches:
commit 0f7723bb09440ae69743fed38cf558a838aa9bdf
Author: Bryan Huntsman <bryanh@codeaurora.org>
Date: Thu Oct 6 23:13:56 2011 -0700
Revert "spi_qsd: GPIO configuration changes for SPI chip-select line"
This reverts commit 7eaa08b75995289a91c7dd1f3616f79227f5f923.
Signed-off-by: Bryan Huntsman <bryanh@codeaurora.org>
commit 7eaa08b75995289a91c7dd1f3616f79227f5f923
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Wed Sep 28 16:26:39 2011 -0600
spi_qsd: GPIO configuration changes for SPI chip-select line
The chip-select GPIO's pertaining to each slave remains in suspended
configuration until the first transfer is intiated by the slave.
Change-Id: I3aa8555289be7ce457b91a969cf03909be0965d7
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit e47df9f9b932968152ab2908153e60adab4402d7
Author: Jordan Crouse <jcrouse@codeaurora.org>
Date: Mon Sep 19 11:21:16 2011 -0600
spi_qsd: Fix possible uninitialized variable
Change-Id: Ic0dedbad184046e9835cde015ad5d592f33e82a6
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
commit 4ae02c76b98f2b96bfb8c4fa02f40cfda2f16f97
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Tue Sep 20 17:28:50 2011 -0600
spi_qsd: Fix Klocwork errors in SPI driver
Change-Id: I1fe6632e68ea625966aced37a1b140b30534e101
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 52e065ba3d86977b59937693ac7e85836cf4eca8
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Thu Sep 1 12:12:58 2011 -0600
spi_qsd: Fix for SPI Operational State Invalid error
This error is reproted randomly when the SPI core is put
into RUN state and occurs when the ACPU clock is low.
When the timer expires, we check again to ensure that the
STATE_VALID bit is set before returning.
Change-Id: Ic8912534f4924efd999b8aa1d75a9fd19749e870
CRs-fixed: 304672
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit a9a8816913e5466e06b443c42cbf8ae866b95fd1
Author: Jeff Ohlstein <johlstei@codeaurora.org>
Date: Fri Sep 2 13:55:16 2011 -0700
msm: dma: remove crci conflict checking
The crci conflict checking code was designed for a system where a crci's
mux could be changed at runtime. In reality, our chips configure these
statically, so it is not necessary.
Change-Id: I4d5f32cd8728d3c78fca8f64aed0e02b57b6afba
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
commit 36c6f1bb48af3e65db281cc7ccb913a8e81a598e
Author: Matt Wagantall <mattw@codeaurora.org>
Date: Wed Aug 17 15:44:58 2011 -0700
msm: clock: Rename all I2C/SPI clocks to 'core_clk' or "iface_clk"
Drivers should now use their device names to distinguish between
clocks of the same type rather than the clock name.
Change-Id: Iab12caf4eab163773d68f1b2adc1bb4c72c69e83
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
commit 55e656e68cac78eaa367341df2e693a483a53f84
Author: Stepan Moskovchenko <stepanm@codeaurora.org>
Date: Mon Jun 6 14:34:38 2011 -0700
drivers: barriers: Replace dsb() with mb()
Replace explicit dsb() calls with mb(). Now that the
generic ARM implementation defines mb() to mean (at least)
dsb(), it is appropriate to switch back to the generic
kernel version of the barriers. This is also needed for
correctness on certain targets (such as 7x27) where dsb()
is insufficient and other operations (such as outer cache
sync or writing to strongly-ordered memory) are required to
ensure proper I/O operations ordering. In some cases,
remove explicit calls to outer_sync following a barrier
since the barrier will now have an explicit outer_sync
call.
Change-Id: I2c53b8534af9c3cbac4d4d77b322f897a39e7758
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
commit 17194a32164b868f80ce84e313f9148d1dc77e7b
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Fri Jun 3 18:10:09 2011 -0600
spi_qsd: GPIO configuration changes
On suspend, the SPI related GPIO's enter a low power configuration
and on resume they move to an active configuration. This helps
conserving power during power collapse.
Change-Id: I0911867e10fadcfc6950f6dddf74226bd6321c16
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 1777d88688511cd59bad7674c6a2246e0c93142b
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Wed Jun 1 16:54:07 2011 -0600
spi_qsd: Remove restriction on SPI clock speed.
When multiple slaves are connected to the SPI controller,
the driver does not allow the clock to go from lower speed
to a higher speed. This restriction is not required since
there can only be one slave listening at a time. Also,
there are no hardware limitations in doing so.
Change-Id: I4ecabfb3a1515416f050c18678cf0987dcde9d1e
CRs-fixed: 290127
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 4b7c7bfc546cb02141da9d034421aefe5635f857
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Tue Jun 7 14:18:42 2011 -0600
spi_qsd: Add null pointer check before dereferencing
During probe, there is no cur_msg to set the status.
Change-Id: I82e00b9d74d45c36b70078b171db1bb150d1bfac
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit bf514c766fcc2bdee680f80a2ea16c7fead0be96
Author: Stepan Moskovchenko <stepanm@codeaurora.org>
Date: Mon May 16 13:37:11 2011 -0700
msm: spi: Fix access to unclocked registers
Don't program the GSBI configuration until the clocks have
been turned on.
Change-Id: Idee5f5dffcb5ed0f7de18f1e508ee8c76b618894
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
commit d9c248213f4cd025f3d3586f0de81e4bc44a5a54
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Mon May 16 16:43:08 2011 -0600
spi_qsd: Fix for SPI input overrun error
This error occurs due to a bug in the controller.
This bogus error is reported when a transition from run
to reset state occurs and if the input FIFO has an odd number
of entries.
Change-Id: I555864d4855ac6d416997da69d8bc6aee7a82178
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit e99ceb5b3da7bec51be853809c25df8e32b2c1e6
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Thu Apr 14 18:36:34 2011 -0600
spi_qsd: Multi-transfer handling
When there are mulitple SPI transfers in a message, we
default to using FIFO mode for all the transfers. As special
case, we handle a WR-WR or WR-RD transfer where we choose
between FIFO mode and DM mode based on the total length of
the transaction.
Change-Id: I6fbc1a06a22f9782db5b97c9b87cc53392a8c2fa
CRs-fixed: 276666
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 8f3d3aaa51603a929027bc820fe2d3515e959779
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Tue Apr 19 14:19:29 2011 -0600
spi_qsd: Ensure IO operation ordering
Adding memory barriers to ensure that the writes and reads
to the SPI and QUP registers happen in the correct order.
Change-Id: I86d8f63b0e9547a2339ee4ab5c713cf8864fef04
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 36b3fae5f54230cd1e4ca072d1f55cb2f79d8945
Author: Laura Abbott <lauraa@codeaurora.org>
Date: Thu Oct 14 12:48:16 2010 -0700
spi_qsd: Fix section mismatch
The function msm_spi_probe is referenced outside of the __init section.
This fixes the problem by calling platform_driver_probe instead of
platform_driver_register since this device is not hotplugable.
Change-Id: I3a563c6fc562ada959317b54ff60a38f9ce517d8
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
commit dc2e36eecefb6628031afeff28afd9d97f2f3f6f
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Wed Sep 29 16:58:20 2010 -0600
spi_qsd: Changes to support DM mode.
The dma_config function may not always be present.
This change makes sure the driver gets DM resources
irrespective of the dma_config function.
Change-Id: I25a2497d20e973f22b76f2b5d6f68c86bd4d5f1d
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit a39bd4a398674c320925540eec91d94d2b7d53f3
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Thu Aug 19 17:48:01 2010 -0600
spi_qsd: Modify timeout mechanism to check SPI state valid bit.
In order to allow sufficient time for the SPI state
transition to occur, calculate the timeout based on
the SPI clock speed.
Change-Id: I3d6955b2a64a8bf8980590e352fbd564250210fb
CRs-fixed: 250998
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit b5887b644ba9545672d637985713c7e0e2e5bb50
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Tue Aug 3 16:57:33 2010 -0600
spi_qsd: Use FIFO mode when DM mode configuration fails.
When the Data Mover configuration fails, the driver
uses FIFO mode.
Change-Id: Iaf83e50fe725654c58260c5cd1150cdeb56f51c8
CRs-fixed: 249238
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit ced8ad320d480006643a3aa3474f5c0d77457454
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Mon Jun 28 16:01:33 2010 -0600
spi_qsd: Use SW timeout instead of SPI_TIME_OUT register.
Since the software timeout is already present in the driver,
the hardware SPI_TIME_OUT register is being removed.It is just
redundant and used only for debugging purposes.
Change-Id: I829cb944444fc3e5053bc810adffe2b87f511b63
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 35e9155f59317e8ef63b8ce5190f26f5cae6a8ee
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Fri Jun 25 16:48:25 2010 -0600
spi_qsd: Disable irqs in the probe function.
The irqs are disabled at all times in the probe function
irrespective of the use of remote lock.
Change-Id: I0997d07b93c97a12bca6d80a9bba59682b1bec3e
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit e6af92d74a35ba267125bc61c2c6c18034c03af3
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Tue Jun 22 12:20:46 2010 -0600
spi_qsd: Disable clocks and irqs when SPI bus is not in use.
The SPI clocks and irqs are enabled per workqueue and correspondingly
disabled once the workqueue is completed.
Change-Id: Ib22b7e3b946eb4c829940e43327caaf5aff7721b
CRs-fixed: 242866
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit b25e4220efdacc231cb150fc263af1e3f525b165
Author: Lena Salman <esalman@qualcomm.com>
Date: Tue Jun 8 15:25:47 2010 +0300
spi_qsd: Add usage of MX_WRITE_COUNT register
Use MX_WRITE_COUNT register to reduce the amount of TX interrupts in
FIFO mode for transfers smaller than FIFO size.
Change-Id: I7208fdc85b626a31a8b781ee5c56f73beee6c427
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 7ed56f3441c5ebe7fd8107fb8468207a88bc743f
Author: Lena Salman <esalman@qualcomm.com>
Date: Wed Jun 9 16:14:44 2010 +0300
spi_qsd: Minor changes to support Data Mover mode on QUPe core
Minor changes to support Data Mover made on QUPe core.
Change-Id: I54663115a43f7fd9b52a2ddee796b5499d5f239a
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit a85fd0ab6484eb2ef404c062adffce1ee22337f1
Author: Lena Salman <esalman@qualcomm.com>
Date: Thu Jun 3 13:57:02 2010 +0300
spi_qsd: Add support for QUPe controller
QUPe controller is a new version of Qualcomm SPI controller. The
controller also supports other peripheral protocols, however its SPI
functionality is very similar to previous SPI core, supported by spi_qsd.
Therefore the same driver is being utilized with some register address
modification and minor flow change.
Change-Id: Ic091ef2c2ed699b43f786c278b613e69a7e9039b
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit ce270f6f9198cf40ee5638b35e595da81116241e
Author: Jeff Ohlstein <johlstei@quicinc.com>
Date: Thu Apr 29 13:40:53 2010 -0700
drivers: spi: Support ADM3 in spi_qsd driver
Change-Id: I6dfa38a4c33a8e4619d56ce30787e1aeafc8356d
Signed-off-by: Jeff Ohlstein <johlstei@quicinc.com>
commit 47346fa611773ef92d12d9145ea33a7f2c79052f
Author: Lena Salman <esalman@qualcomm.com>
Date: Wed Apr 28 11:33:15 2010 +0300
spi_qsd: Add disable/enable of pclk to suspend/resume functions
Add disable/enable of pclk to suspend/resume functions to improve
power performance.
Change-Id: I871e5ac90a998f2942778bb1e8c2c9d583a9ae00
CRs-fixed: 235046
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit a96eba98fbbd21ac657f5d551466909352766ead
Author: Lena Salman <esalman@qualcomm.com>
Date: Sun Apr 11 10:40:37 2010 +0300
spi_qsd: Making irq code implicit for the core mode in use
Make code clear regarding what mode is in use in the irq.
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 6a02d85f8f48cf6f86cddc38c9fce9c1179208b4
Author: Lena Salman <esalman@qualcomm.com>
Date: Tue Apr 13 21:16:45 2010 +0300
spi_qsd: Separate tx/rx/error statistics between contexts
To improve SMP safety, separate the tx/error statistics between
contexts. This protects the statistics from accidentally being
access from another context at the same time.
Change-Id: Ibc52406e7b06a4bb5142f8a09a2f35442cb9df8a
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 31f301c171aab8e42f8b6abe9b7866412cb546a8
Author: Lena Salman <esalman@qualcomm.com>
Date: Tue Mar 23 14:51:00 2010 +0200
spi_qsd: Add better handling for pending transfers during suspend
To improve SMP safety, add better handling in suspend function to wait
for graceful closure of pending transfers. This graceful closure waits
for all the pending transfers to finish or timeout, while not allowing new
ones to queue up. This allows correct handling of all the resources
involved in a transfer before suspend.
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 8fbf6e4c5371520b5f9de2001e2ebd15773e918b
Author: Lena Salman <esalman@qualcomm.com>
Date: Thu Mar 25 10:44:10 2010 +0200
spi_qsd: Add mutex to get exclusive access to controller registers
To improve SMP safety, add mutex to get exclusive access to controller
registers.
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 9405adda67d8c6a856243e599f09d806b4bc6de5
Author: Kenneth Heitke <kheitke@quicinc.com>
Date: Thu Apr 15 16:33:16 2010 -0600
spi_qsd: Move global input_fifo_size to device context.
Fix reference to device data input_fifo_size which is missing from the
previous patch.
Change-Id: Ia469896edd0fd90d7ded2b8ec44f9075474b3ec8
Signed-off-by: Kenneth Heitke <kheitke@quicinc.com>
commit 6031094ca6a940a47437bc6a092e813b4bc41d2a
Author: Lena Salman <esalman@qualcomm.com>
Date: Sun Apr 11 10:34:48 2010 +0300
spi_qsd: Move global input_fifo_size to device context.
To improve SMP safety move global variable input_fifo_size to device
context.
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 97f585033413b1f8ae210bbffd617a4af3462982
Author: Lena Salman <esalman@qualcomm.com>
Date: Wed Apr 14 18:35:54 2010 +0300
spi_qsd: Initial contribution of the MSM SPI driver
This adds MSM SPI controller driver. The driver is SPI master, and
allows slave connections. Current version of the driver supports
FIFO and DM modes chosen upon the message size. The driver also
supports loopback mode which can be used for testing purposes.
This is a squashed version of all the MSM SPI driver changes on the QuIC
MSM 2.6.29 kernel which can be found at www.codeaurora.org.
It also contains all relevant adaptations to SPI core changes in 2.6.32
kernel.
https://www.codeaurora.org/gitweb/quic/la/?p=kernel/msm.git;a=blob;f=drivers/spi/spi_qsd.c;h=1c8e3ec727b29040648ef9a4949396f7109528ae;hb=refs/heads/android-msm-2.6.29b
Change-Id: Ibc1e71deb662af87deed77f10dcc8a3a46a8f012
Signed-off-by: Lena Salman <esalman@qualcomm.com>
Signed-off-by: David Brown <davidb@codeaurora.org>
Add SPI driver for NVIDIA's Tegra114 SPI controller. This controller
is different than the older SoCs SPI controller in internal design as
well as register interface.
This driver supports the:
- non DMA based transfer for smaller transfer i.e. less than FIFO depth.
- APB DMA based transfer for larger transfer i.e. more than FIFO depth.
- Clock gating through runtime PM callbacks.
- registration through DT only.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This makes the spi-fsl-spi driver usable in CPU mode outside of an FSL_SOC and
even an powerpc environment by moving CPM mode functionality to a separate file
that is only compiled and linked in an FSL_SOC environment and adding some
ifdefs to hide types and functions or provide alternatives.
For devicetree probing a "clock-frequency" property is used for clock frequency
instead of calls to FSL_SOC-specific functions.
Acked-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
The BCM2835 contains two forms of SPI master controller (one known
simply as SPI0, and the other known as the "Universal SPI Master", in
the auxilliary block) and one form of SPI slave controller. This patch
adds support for the SPI0 controller.
This driver is taken from Chris Boot's repository at
git://github.com/bootc/linux.git rpi-linear
as of commit 6de2905 "spi-bcm2708: fix printf with spurious %s".
In the first SPI-related commit there, Chris wrote:
Thanks to csoutreach / A Robinson for his driver which I used as an
inspiration. You can find his version here:
http://piface.openlx.org.uk/raspberry-pi-spi-kernel-driver-available-for
Changes made during upstreaming:
* Renamed bcm2708 to bcm2835 as per upstream naming for this SoC.
* Removed support for brcm,realtime property.
* Increased transfer timeout to 30 seconds.
* Return IRQ_NONE from the IRQ handler if no interrupt was handled.
* Disable TA (Transfer Active) and clear FIFOs on a transfer timeout.
* Wrote device tree binding documentation.
* Request unnamed clock rather than "sys_pclk"; the DT will provide the
correct clock.
* Assume that tfr->speed_hz and tfr->bits_per_word are always set in
bcm2835_spi_start_transfer(), bcm2835_spi_transfer_one(), so no need
to check spi->speed_hz or tft->bits_per_word.
* Re-ordered probe() to remove the need for temporary variables.
* Call clk_disable_unprepare() rather than just clk_unprepare() on probe()
failure.
* Don't use devm_request_irq(), to ensure that the IRQ doesn't fire after
we've torn down the device, but not unhooked the IRQ.
* Moved probe()'s call to clk_prepare_enable() so we can be sure the clock
is enabled if the IRQ handler fires immediately.
* Remove redundant checks from bcm2835_spi_check_transfer() and
bcm2835_spi_setup().
* Re-ordered IRQ handler to check for RXR before DONE. Added comments to
ISR.
* Removed empty prepare/unprepare implementations.
* Removed use of devinit/devexit.
* Added BCM2835_ prefix to defines.
Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
To be able to use DMA with this driver on non-PXA platforms we implement
support for the generic DMA engine API. This lets user to use different DMA
engines with little or no modification to the driver.
Request lines and channel numbers can be passed to the driver from the
platform specific data.
The DMA engine implementation will be selected by default even on PXA
platform. User can select the legacy DMA API by enabling Kconfig option
CONFIG_SPI_PXA2XX_PXADMA.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Lu Cao <lucao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The PXA SPI driver uses PXA platform specific private DMA implementation
which does not work on non-PXA platforms. In order to use this driver on
other platforms we break out the private DMA implementation into a separate
file that gets compiled only when CONFIG_SPI_PXA2XX_PXADMA is set. The DMA
functions are stubbed out if there is no DMA implementation selected (i.e
we are building on non-PXA platform).
While we are there we can kill the dummy DMA bits in pxa2xx_spi.h as they
are not needed anymore for CE4100.
Once this is done we can add the generic DMA engine support to the driver
that allows usage of any DMA controller that implements DMA engine API.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Lu Cao <lucao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This driver is obsolete and can't even be built anymore since the
platform it depends has been removed.
The STMP series is completely covered by the MXS platform these days, so
spi-mxs can be used instead.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This patch add new driver for CLPS711X SPI master controller.
Due to platform limitations driver supports only 8 bit transfer mode.
Chip select control is handled via GPIO.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
NVIDIA's Tegra20 have the SPI (SFLASH) controller to
interface with spi flash device which is used for system
boot. Add the spi driver for this controller.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tegra20/Tegra30 supports the spi interface through its SLINK
controller. Add spi driver for SLINK controller.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Pull MIPS update from Ralf Baechle:
"This is the MIPS update for 3.7.
A fair chunk of them are platform updates to the Cavium Octeon SOC
(which involves machine generated header files of considerable size),
Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx
platforms.
Support for the commercial MIPS simulator MIPSsim has been removed as
MIPS Technologies is shifting away from this product and Qemu is
offering various more powerful platforms. The generic MIPS code can
now also probe for no-execute / write-only TLB features implemented
without the full SmartMIPS extension as permitted by the latest MIPS
processor architecture. Lots of small changes to generic code."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits)
MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs
MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
MIPS: BCM63XX: Properly handle mac address octet overflow
MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user.
MIPS: Replace `-' in defconfig filename wth `_' for consistency.
MIPS: Wire kcmp syscall.
MIPS: MIPSsim: Remove the MIPSsim platform.
MIPS: NOTIFY_RESUME is not needed in TIF masks
MIPS: Merge the identical "return from syscall" per-ABI code
MIPS: Unobfuscate _TIF..._MASK
MIPS: Prevent hitting do_notify_resume() with !user_mode(regs).
MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'.
MIPS: Add base architecture support for RI and XI.
MIPS: Optimise TLB handlers for MIPS32/64 R2 cores.
MIPS: uasm: Add INS and EXT instructions.
MIPS: Avoid pipeline stalls on some MIPS32R2 cores.
MIPS: Make VPE count to be one-based.
MIPS: Add new end of interrupt functionality for GIC.
MIPS: Add EIC support for GIC.
MIPS: Code clean-ups for the GIC.
...
The current SPI driver has many issues. Examples are:
* Segfaulting on most transfers due to expecting all transfers to have
both RX and TX buffers.
* Hanging on TX transfers since the whole driver flow is driven by RX
DMA completion, but the HW is only told to enable RX for RX transfers.
* Use of clk_disable_unprepare() from atomic context.
* Once those and other minor issues are fixed, the driver still doesn't
actually work.
* The driver also implements a deprecated API to the SPI core.
For this reason, simply remove the driver completely. This has two
advantages:
1) This will remove the last use of Tegra's <mach/dma.h>, which will
allow that file to be removed, which is required for single zImage
work.
2) The downstream driver is significaly different from the current
code. I believe a patch to re-add the downstream driver (with
appropriate cleanup) will be much simpler to review if it's a new
file rather than randomly interspered with essentially unrelated
existing code.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Add the driver, link it into the kbuild system and provide device tree
binding documentation.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Patchwork: http://patchwork.linux-mips.org/patch/4292/
Signed-off-by: John Crispin <blogic@openwrt.org>
This driver adds support for NXP SC18IS602/603 I2C to SPI bus bridge.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This is slightly reworked version of the SPI driver.
Support for DT has been added and it's been converted
to queued API.
Based on previous attempt by:
Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Pull MIPS updates from Ralf Baechle:
"More hardware support across the field including a bunch of device
drivers. The highlight however really are further steps towards
device tree.
This has been sitting in -next for ages. All MIPS _defconfigs have
been tested to boot or where I don't have hardware available, to at
least build fine."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (77 commits)
MIPS: Loongson 1B: Add defconfig
MIPS: Loongson 1B: Add board support
MIPS: Netlogic: early console fix
MIPS: Netlogic: Fix indentation of smpboot.S
MIPS: Netlogic: remove cpu_has_dc_aliases define for XLP
MIPS: Netlogic: Remove unused pcibios_fixups
MIPS: Netlogic: Add XLP SoC devices in FDT
MIPS: Netlogic: Add IRQ mappings for more devices
MIPS: Netlogic: USB support for XLP
MIPS: Netlogic: XLP PCIe controller support.
MIPS: Netlogic: Platform changes for XLR/XLS I2C
MIPS: Netlogic: Platform NAND/NOR flash support
MIPS: Netlogic: Platform changes for XLS USB
MIPS: Netlogic: Remove NETLOGIC_ prefix
MIPS: Netlogic: SMP wakeup code update
MIPS: Netlogic: Update comments in smpboot.S
MIPS: BCM63XX: Add 96328avng reference board
MIPS: Expose PCIe drivers for MIPS
MIPS: BCM63XX: Add PCIe Support for BCM6328
MIPS: BCM63XX: Move the PCI initialization into its own function
...
The external bus unit (EBU) found on the FALCON SoC has spi emulation that is
designed for serial flash access. This driver has only been tested with m25p80
type chips. The hardware has no support for other types of spi peripherals.
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: spi-devel-general@lists.sourceforge.net
Cc: linux-mips@linux-mips.org
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Patchwork: https://patchwork.linux-mips.org/patch/3844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch adds support for the I2C-SPI bridge which can be found on the Analog
Devices AD-FMCOMMS1-EBZ board.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This controller is only for blackfin 5xx soc, so rename it to BFIN5XX
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This patch adds support for the SPI controller found on the Broadcom BCM63xx
SoCs.
Signed-off-by: Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CSR SiRFprimaII has two SPIs (SPI0 and SPI1). Features:
* Master and slave modes
* 8-/12-/16-/32-bit data unit
* 256 bytes receive data FIFO and 256 bytes transmit data FIFO
* Multi-unit frame
* Configurable SPI_EN (chip select pin) active state
* Configurable SPI_CLK polarity
* Configurable SPI_CLK phase
* Configurable MSB/LSB first
Signed-off-by: Zhiwu Song <zhiwu.song@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This patch adds SuperH HSPI driver.
It is still prototype driver, but has enough function at this point.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
The SH7757 has RSPI module. This patch supports it.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
It was equivalent to spi-gpio, and there's no longer any in-tree users
of it, so get rid of it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Sort the SPI makefile and enforce the naming convention spi_*.c for
spi drivers.
This change also rolls the contents of atmel_spi.h into the .c file
since there is only one user of that particular include file.
v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be
be the predominant pattern for subsystem prefixes.
- Clean up filenames in Kconfig and header comment blocks
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The Blackfin SPORT peripheral is a pretty flexible device. With enough
coaching, we can make it generate SPI compatible waveforms. This is
desirable as the SPORT can run at much higher clock frequencies than the
dedicated on-chip SPI peripheral, and it can do full duplex DMA. It also
opens up the possibility of multiple SPI buses in case someone wants to
dedicate a whole bus to a specific part that does not play well with
others.
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
spi/dw_spi: move dw_spi.h into drivers/spi
spi/dw_spi: Fix missing header
gpio/langwell: Clear edge bit before handling
gpio/langwell: Simplify demux loop
gpio/langwell: Convert irq name space
gpio/langwell: Fix broken irq_eoi change.
gpio; Make Intel chipset gpio drivers depend on x86
gpio/cs5535-gpio: Fix section mismatch
spi/rtc-{ds1390,ds3234,m41t94}: Use spi_get_drvdata() for SPI devices
spi/davinci: Support DMA transfers larger than 65535 words
spi/davinci: Use correct length parameter to dma_map_single calls
gpio: Use __devexit at necessary places
gpio: add MODULE_DEVICE_TABLE to pch_gpio and ml_ioh_gpio
gpio/mcp23s08: support mcp23s17 variant
of_mmc_spi: add card detect irq support
spi/omap_mcspi: catch xfers of non-multiple SPI word size
spi/omap_mcspi: Off-by-one error in finding the right divisor
gpio/pca953x: Fix wrong pointer type
spi/pl022: rid dangling labels
spi: add support for SuperH SPI
...
This patch adds an SPI master implementation that operates on top of an
underlying TI-SSP port.
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
The SH7757 has SPI0 module. This patch supports it.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[grant.likely@secretlab.ca: fixed Makefile ordering, added
__dev{init,exit} annotations, removed DRIVER_VERSION (this is
mainline, the version == the kernel version) and tidied some
indentation & style stuff]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This patch adds a new SPI driver to support the Altera SOPC Builder
SPI component. It uses the bitbanging library.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This patch adds support of OpenCores tiny SPI driver.
http://opencores.org/project,tiny_spi
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This
patch implements a driver for that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: spi-devel-general@lists.sourceforge.net
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1960/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* 'spi' of git://git.linutronix.de/users/bigeasy/soda into spi/next
spi/pxa2xx: register driver properly
spi/pxa2xx: add support for shared IRQ handler
spi/pxa2xx: Use define for SSSR_TFL_MASK instead of plain numbers
arm/pxa2xx: reorgazine SSP and SPI header files
spi/pxa2xx: Add CE4100 support
spi/pxa2xx: Consider CE4100's FIFO depth
spi/pxa2xx: Add chipselect support for Sodaville
spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes.
spi/pxa2xx: pass of_node to spi device and set a parent device
dw_spi driver in upstream only supports PIO mode, and this patch
will support it to cowork with the Designware dma controller used
on Intel Moorestown platform, at the same time it provides a general
framework to support dw_spi core to cowork with dma controllers on
other platforms
It has been tested with a Option GTM501L 3G modem and Infenion 60x60
modem. To use DMA mode, DMA controller 2 of Moorestown has to be enabled
Also change the dma interface suggested by Linus Walleij.
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
[Typo fix and renames to match intel_mid_dma renaming]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Sodaville's SPI controller is very much the same as in PXA25x. The
difference:
- The RX/TX FIFO is only 4 words deep instead of 16
- No DMA support
- The SPI controller offers a CS functionality
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Now that the of_platform_bus_type has been merged with the platform
bus type, a single platform driver can handle both OF and non-OF use
cases. This patch merges the OF support into the platform driver.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Michal Simek <monstr@monstr.eu>
This patch merges the platform driver support into the main body of
xilinx_spi.c in preparation for merging the OF and non-OF support
code.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Michal Simek <monstr@monstr.eu>
v2 changes:
from Thierry Reding:
* add "select TEGRA_SYSTEM_DMA" to Kconfig
from Grant Likely:
* add oneline description to header
* inline references to DRIVER_NAME
* inline references to BUSY_TIMEOUT
* open coded bytes_per_word()
* spi_readl/writel -> spi_tegra_readl/writel
* move transfer validation to spi_tegra_transfer
* don't request_mem_region iomem as platform bus does that for us
* __exit -> __devexit
v3 changes:
from Russell King:
* put request_mem_region back int
from Grant Likely:
* remove #undef DEBUG
* add SLINK_ to register bit defines
* remove unused bytes_per_word
* make spi_tegra_readl/writel static linine
* various refactoring for clarity
* mark err if BSY bit is not cleared after 1000 retries
* move spinlock to protect setting of RDY bit
* subsys_initcall -> module_init
v3 changes:
from Grant Likely:
* update spi_tegra to use PTR_ERRless dma API
v4 changes:
from Grant Likely:
* remove empty spi_tegra_cleanup fucntion
* allow device ids of -1
Signed-off-by: Erik Gilling <konkers@android.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Russell King <linux@arm.linux.org.uk>
spi: tegra: cleanups from upstream review
Change-Id: Icecf7e64efcb39de072a15234ba1faa4bad40d25
Signed-off-by: Erik Gilling <konkers@android.com>
Add eSPI controller support based on the library code spi_fsl_lib.c.
The eSPI controller is newer controller 85xx/Pxxx devices supported.
There're some differences comparing to the SPI controller:
1. Has different register map and different bit definition
So leave the code operated the register to the driver code, not
the common code.
2. Support 4 dedicated chip selects
The software can't controll the chip selects directly, The SPCOM[CS]
field is used to select which chip selects is used, and the
SPCOM[TRANLEN] field is set to tell the controller how long the CS
signal need to be asserted. So the driver doesn't need the chipselect
related function when transfering data, just set corresponding register
fields to controll the chipseclect.
3. Different Transmit/Receive FIFO access register behavior
For SPI controller, the Tx/Rx FIFO access register can hold only
one character regardless of the character length, but for eSPI
controller, the register can hold 4 or 2 characters according to
the character lengths. Access the Tx/Rx FIFO access register of the
eSPI controller will shift out/in 4/2 characters one time. For SPI
subsystem, the command and data are put into different transfers, so
we need to combine all the transfers to one transfer in order to pass
the transfer to eSPI controller.
4. The max transaction length limitation
The max transaction length one time is limitted by the SPCOM[TRANSLEN]
field which is 0xFFFF. When used mkfs.ext2 command to create ext2
filesystem on the flash, the read length will exceed the max value of
the SPCOM[TRANSLEN] field.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Refactor the common code in file spi_fsl_spi.c to spi_fsl_lib.c used
by SPI/eSPI controller driver as a library, and leave the QE/CPM SPI
controller code in the SPI controller driver spi_fsl_spi.c.
Because the register map of the SPI controller and eSPI controller
is so different, also leave the code operated the register to the
driver code, not the common code.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This will pave the way to refactor out the common code which can be used
by the eSPI controller driver, and rename the SPI controller dirver to the
file spi_fsl_spi.c.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Topcliff PCH is the platform controller hub that is going to be used
in Intel's upcoming general embedded platform. All IO peripherals in
Topcliff PCH are actually devices sitting on AMBA bus. This patch
adds a driver for the SPI bus integrated into the Topcliff device.
Signed-off-by: Masayuki Ohtake <masa-korg@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This patch adds an SPI master driver for the Cirrus EP93xx SPI controller found
in EP93xx chips.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Add support for the QSPI controller found some on Freescale/Motorola
Coldfire MCUs.
Full duplex, active high cs, spi modes 0-3 and word sizes 8-16 bits are
supported. The hardware drives the MISO, MOSI and SCLK lines, but the chip
selects are managed via GPIO and must be configured by the board code.
The QSPI controller has an 80 byte buffer which allows us to transfer up to 16
words at a time. For transfers longer than 16 words, we split the buffer in
half so we can update in one half while the controller is operating on the
other half. Interrupt latencies then ultimately limits our sustained thru-put
to something less than half the maximum speed supported by the part.
Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
LuK1337
David Brown
Laxman Dewangan
Andreas Larsson
Chris Boot
Mika Westerberg
Wolfram Sang
Grant Likely
Alexander Shiyan
Linus Torvalds
Stephen Warren
Mark Brown
David Daney
Guenter Roeck
Marek Vasut
Thomas Langer
Lars-Peter Clausen
Scott Jiang
Florian Fainelli
Zhiwu Song
Kuninori Morimoto
Shimoda, Yoshihiro
Peter Korsgaard
Cliff Cai
Cyril Chemparathy
Thomas Chou
Gabor Juhos
Feng Tang
Sebastian Andrzej Siewior
Erik Gilling
Mingkai Hu
matt mooney
Masayuki Ohtake
Anatolij Gustschin
Mika Westerberg
Jean-Hugues Deschenes
Steven King