Report error of f2fs_fill_dentries to ->iterate_shared, otherwise when
error ocurrs, user may just list part of dirents in target directory
without any hints.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Conflicts:
fs/f2fs/dir.c
fs/f2fs/f2fs.h
fs/f2fs/inline.c
This is to avoid no free segment bug during checkpoint caused by a number of
dirty inodes.
The case was reported by Chao like this.
1. mount with lazytime option
2. fill 4k file until disk is full
3. sync filesystem
4. read all files in the image
5. umount
In this case, we actually don't need to flush dirty inode to inode page during
checkpoint.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Conflicts:
fs/f2fs/acl.c
fs/f2fs/inode.c
fs/f2fs/namei.c
f2fs contained a number of endianness conversion bugs.
Also, one function should have been 'static'.
Found with sparse by running 'make C=2 CF=-D__CHECK_ENDIAN__ fs/f2fs/'
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there is no dirty pages in inode, we should give a chance to detach
the inode from global dirty list, otherwise it needs to call another
unnecessary .writepages for detaching.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we only support global fault injection configuration, so that
when we configure type/rate of fault injection through sysfs, mount
option, it will influence all f2fs partition which is being used.
It is not make sence, since it will be not convenient if developer want
to test separated partitions with different fault injection rate/type
simultaneously, also it's not possible to enable fault injection in one
partition and disable fault injection in other one.
>From now on, we move global configuration of fault injection in module
into per-superblock, hence injection testing can be more flexible.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Conflicts:
fs/f2fs/super.c
This patch sets encryption name flag in the add inline entry path
if filename is encrypted.
Signed-off-by: Shuoran Liu <liushuoran@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When creating new inode, security_inode_init_security will be called for
initializing security info related to the inode, and filename is passed to
security module, it helps security module such as SElinux to know which
rule or label could be applied for the inode with specified name.
Previously, if new inode is created as an encrypted one, f2fs will transfer
encrypted filename to security module which may fail the check of security
policy belong to the inode. So in order to this issue, alter to transfer
original unencrypted filename instead.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If dotdot directory is corrupted, its slot may be ocupied by another
file. In this case, dentry[1] is not the parent directory. Rename and
cross-rename will update the inode in dentry[1] incorrectly. This
patch finds dotdot dentry by name.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
[Jaegeuk Kim: remove wron bug_on]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Conflicts:
fs/f2fs/f2fs.h
If we get ENOMEM or EIO in f2fs_find_entry, we should stop right away.
Otherwise, for example, we can get duplicate directory entry by ->chash and
->clevel.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch reduces to call them across the whole tree.
- sync_inode_page()
- update_inode_page()
- update_inode()
- f2fs_write_inode()
Instead, checkpoint will flush all the dirty inode metadata before syncing
node pages.
Note that, this is doable, since we call mark_inode_dirty_sync() for all
inode's field change which needs to update on-disk inode as well.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Conflicts:
fs/f2fs/namei.c
This patch refactors to use inode pointer for set_inode_flag and
clear_inode_flag.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Conflicts:
fs/f2fs/acl.c
fs/f2fs/file.c
fs/f2fs/namei.c
Fix two bugs in error path of f2fs_move_rehashed_dirents:
- release dir's inode page if fail to call kmalloc
- recover i_current_depth if fail to converting
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With below steps, we will see that dentry page becoming unaccessable later.
This is because we forget updating i_current_depth in inode during inline
dentry conversion, after that, once we failed at somewhere, it will leave
i_current_depth as 0 in non-inline directory. Then, during ->lookup, the
current_depth value makes all dentry pages in first level invisible. Fix
it.
1) mount f2fs with inline_dentry option
2) mkdir dir
3) touch 180 files named [0-179] in dir
4) touch 180 in dir (fail after inline dir conversion)
5) ll dir
ls: cannot access /mnt/f2fs/dir/0: No such file or directory
ls: cannot access /mnt/f2fs/dir/1: No such file or directory
ls: cannot access /mnt/f2fs/dir/2: No such file or directory
ls: cannot access /mnt/f2fs/dir/3: No such file or directory
ls: cannot access /mnt/f2fs/dir/4: No such file or directory
drwxr-xr-x 2 root root 4096 may 13 21:47 ./
drwxr-xr-x 3 root root 4096 may 13 21:46 ../
-????????? ? ? ? ? ? 0
-????????? ? ? ? ? ? 1
-????????? ? ? ? ? ? 10
-????????? ? ? ? ? ? 100
-????????? ? ? ? ? ? 101
-????????? ? ? ? ? ? 102
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Conflicts:
fs/f2fs/inline.c
The filename length in dirent of may become zero-sized after random junk
data injection, once encounter such dirent, find_target_dentry or
f2fs_add_inline_entries will run into an infinite loop. So let f2fs being
aware of that to avoid deadloop.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With below serials, we will lose parts of dirents:
1) mount f2fs with inline_dentry option
2) echo 1 > /sys/fs/f2fs/sdX/dir_level
3) mkdir dir
4) touch 180 files named [1-180] in dir
5) touch 181 in dir
6) echo 3 > /proc/sys/vm/drop_caches
7) ll dir
ls: cannot access 2: No such file or directory
ls: cannot access 4: No such file or directory
ls: cannot access 5: No such file or directory
ls: cannot access 6: No such file or directory
ls: cannot access 8: No such file or directory
ls: cannot access 9: No such file or directory
...
total 360
drwxr-xr-x 2 root root 4096 Feb 19 15:12 ./
drwxr-xr-x 3 root root 4096 Feb 19 15:11 ../
-rw-r--r-- 1 root root 0 Feb 19 15:12 1
-rw-r--r-- 1 root root 0 Feb 19 15:12 10
-rw-r--r-- 1 root root 0 Feb 19 15:12 100
-????????? ? ? ? ? ? 101
-????????? ? ? ? ? ? 102
-????????? ? ? ? ? ? 103
...
The reason is: when doing the inline dir conversion, we didn't consider
that directory has hierarchical hash structure which can be configured
through sysfs interface 'dir_level'.
By default, dir_level of directory inode is 0, it means we have one bucket
in hash table located in first level, all dirents will be hashed in this
bucket, so it has no problem for us to do the duplication simply between
inline dentry page and converted normal dentry page.
However, if we configured dir_level with the value N (greater than 0), it
will expand the bucket number of first level hash table by 2^N - 1, it
hashs dirents into different buckets according their hash value, if we
still move all dirents to first bucket, it makes incorrent locating for
inline dirents, the result is, although we can iterate all dirents through
->readdir, we can't stat some of them in ->lookup which based on hash
table searching.
This patch fixes this issue by rehashing dirents into correct position
when converting inline directory.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Conflicts:
fs/f2fs/dir.c
fs/f2fs/f2fs.h
This patch adds the renamed functions moved from the f2fs crypto files.
[Backporting to 3.10]
- Removed d_is_negative() in fscrypt_d_revalidate().
1. definitions for per-file encryption used by ext4 and f2fs.
2. crypto.c for encrypt/decrypt functions
a. IO preparation:
- fscrypt_get_ctx / fscrypt_release_ctx
b. before IOs:
- fscrypt_encrypt_page
- fscrypt_decrypt_page
- fscrypt_zeroout_range
c. after IOs:
- fscrypt_decrypt_bio_pages
- fscrypt_pullback_bio_page
- fscrypt_restore_control_page
3. policy.c supporting context management.
a. For ioctls:
- fscrypt_process_policy
- fscrypt_get_policy
b. For context permission
- fscrypt_has_permitted_context
- fscrypt_inherit_context
4. keyinfo.c to handle permissions
- fscrypt_get_encryption_info
- fscrypt_free_encryption_info
5. fname.c to support filename encryption
a. general wrapper functions
- fscrypt_fname_disk_to_usr
- fscrypt_fname_usr_to_disk
- fscrypt_setup_filename
- fscrypt_free_filename
b. specific filename handling functions
- fscrypt_fname_alloc_buffer
- fscrypt_fname_free_buffer
6. Makefile and Kconfig
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a new help f2fs_update_data_blkaddr to clean up redundant codes.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_convert_inline_page introduce what read_inline_data
already does for copying out the inline data from inode_page.
We can use read_inline_data instead to simplify the code.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
no need to wait inline file page writeback for no one
use it, so this patch delete unnecessary wait.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In write_begin, if storage supports stable_page, we don't need to wait for
writeback to update its contents.
This patch introduces to use wait_for_stable_page instead of
wait_on_page_writeback.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The sceanrio is:
1. create fully node blocks
2. flush node blocks
3. write inline_data for all the node blocks again
4. flush node blocks redundantly
So, this patch tries to flush inline_data when flushing node blocks.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds one parameter to clean up all the callers of f2fs_balance_fs.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Conflicts:
fs/f2fs/namei.c
If inline_data option is disable, when truncating an inline inode with
size which is not exceed maxinum inline size, we should not convert
inline inode to regular one to avoid the overhead of synchronizing
conversion.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If user tries to update or read data, we don't need to call f2fs_balance_fs
which triggers f2fs_gc, which increases unnecessary long latency.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We can check inode's inline_data flag when calling to convert it.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The last patch is:
commit beaa57dd986d4f398728c060692fc2452895cfd8
Author: Chao Yu <chao2.yu@samsung.com>
Date: Thu Oct 22 18:24:12 2015 +0800
f2fs: fix to skip shrinking extent nodes
In f2fs_shrink_extent_tree we should stop shrink flow if we have already
shrunk enough nodes in extent cache.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu
Jaegeuk Kim
Eric Biggers
Shuoran Liu
Sheng Yong
Chao Yu
Chao Yu
Shawn Lin
Yunlei He