Commit graph

36 commits

Author SHA1 Message Date
Hans de Goede
72a42f242c Input: atkbd - change mapping for e032 from KEY_WWW to KEY_HOMEPAGE
WWW/Homepage key on Microsoft-compatible keyboards generates KEY_WWW
when connected via PS/2 port but KEY_HOMEPAGE when connected via USB.
This patch changes mapping in atkbd to match one in HID driver.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10 00:35:18 -04:00
Qi Yong
9f7a60d6e4 Input: atkbd - use printk_ratelimit for spurious ACK messages
Signed-off-by: Qi Yong <qiyong@mail.fc-cn.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-28 00:47:10 -04:00
Dmitry Torokhov
da4249c99f Input: atkbd - throttle LED switching
On some boxes keyboard controllers are too slow to withstand
continuous flow of requests to turn keyboard LEDs on and off
and start losing some keypresses or even all of them.

Delay executing of LED switching request if we had another one
within 50 ms thus easing load on the controller.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-28 00:46:56 -04:00
Dmitry Torokhov
469ba4dff9 Input: keyboards - switch to using input_dev->dev.parent
In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-12 01:34:58 -04:00
Dmitry Torokhov
b356872fa4 Input: drivers/input/keyboard - don't access dev->private directly
Use input_get_drvdata() and input_set_drvdata() instead.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-12 01:34:20 -04:00
Dmitry Torokhov
62b529a7b9 Input: remove obsolete setup parameters from input drivers
They have been marked as __obsolete_setup() for several years,
it is time for them to go.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-18 01:44:58 -05:00
Dmitry Torokhov
bef986502f Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/usb/input/hid.h
2006-12-08 01:07:56 -05:00
Akinobu Mita
153a9df01c Input: handle serio_register_driver() errors
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-11-23 23:35:10 -05:00
David Howells
65f27f3844 WorkStruct: Pass the work_struct pointer instead of context data
Pass the work_struct pointer to the work function rather than context data.
The work function can use container_of() to work out the data.

For the cases where the container of the work_struct may go away the moment the
pending bit is cleared, it is made possible to defer the release of the
structure by deferring the clearing of the pending bit.

To make this work, an extra flag is introduced into the management side of the
work_struct.  This governs auto-release of the structure upon execution.

Ordinarily, the work queue executor would release the work_struct for further
scheduling or deallocation by clearing the pending bit prior to jumping to the
work function.  This means that, unless the driver makes some guarantee itself
that the work_struct won't go away, the work function may not access anything
else in the work_struct or its container lest they be deallocated..  This is a
problem if the auxiliary data is taken away (as done by the last patch).

However, if the pending bit is *not* cleared before jumping to the work
function, then the work function *may* access the work_struct and its container
with no problems.  But then the work function must itself release the
work_struct by calling work_release().

In most cases, automatic release is fine, so this is the default.  Special
initiators exist for the non-auto-release case (ending in _NAR).


Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:55:48 +00:00
Dmitry Torokhov
2b03b60e6b Input: keyboards - handle errors when registering input devices
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-11-05 22:39:56 -05:00
Dmitry Torokhov
86255d9d0b Input: atkbd - supress "too many keys" error message
Many users seems to be annoyed by this warning so kill the message
and implement a counter exported as a sysfs attribute so we still
know what is going on. Make atkbd use attribute groups while we are
at it.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-10-11 01:44:46 -04:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Dmitry Torokhov
0612ec4876 Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2006-09-19 01:56:44 -04:00
Dmitry Torokhov
9807879bfd Input: atkbd - support Microsoft Natural Elite Pro keyboards
Microsoft Natural Elite Pro keyboard produces unisual response to
the GET ID command - single byte 0xaa (normally keyboards produce
2-byte response). Fail GET ID command so atkbd gets a change to
do alternate probe.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-09-14 01:31:27 -04:00
Florin Malita
8ea371fb6d Input: atkbd - fix overrun in atkbd_set_repeat_rate()
This was introduced in commit 3d0f0fa0cb:
bounds checking is performed against period[32] while indexing delay[4].

Spotted by Coverity, CID 1376.

Signed-off-by: Florin Malita <fmalita@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-23 00:45:33 -04:00
Dmitry Torokhov
3d0f0fa0cb Input: atkbd - restore repeat rate when resuming
Make the AT keyboard driver restore previously set repeat rate
when resuming. Noticed by Linus Torvalds.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-04 22:52:46 -04:00
Dmitry Torokhov
f8b4c46c0c Input: atkbd - fix hardware autorepeat
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-06-27 23:42:17 -04:00
Dmitry Torokhov
0ae051a190 Input: atkbd - fix HANGEUL/HANJA keys
Make atkbd report HANGEUL/HANJA keys by default and use correct scan
codes for these keys (they were swapped). Also make sure their scancodes
reported as EV_MSC/MSC_SCAN events.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-06-26 01:52:34 -04:00
Jerome Pinot
b9ab58dd8e Input: fix misspelling of Hangeul key
Fix a mispelling of the korean alphabet name in the input subsystem.
See http://en.wikipedia.org/wiki/Hangeul#Names for more details.

KEY_HANGUEL left to not break people

Signed-off-by: Jerome Pinot <ngc891@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-06-26 01:51:23 -04:00
Dmitry Torokhov
ea08c6faa0 Input: fix potential overflows in driver/input/keyboard
Change all sprintfs into snprintfs to make sure we won't stomp on
data adjacent to our buffers.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-06-26 01:46:17 -04:00
Vojtech Pavlik
380e19e2d8 Input: atkbd - disable softrepeat for dumb keyboards
Do not activate softrepeat by default on dumb keyboards as it clashes
with their own hardware repeat (for example Dell DRAC3). Softrepeat
can still be activated manually via module parameter or sysfs.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:10:08 -05:00
Vojtech Pavlik
9b104c12f1 Input: atkbd - fix complaints about 'releasing unknown key 0x7f'
Fix bat_xl and err_xl logic causing atkbd to complain about 'unknown
key 0x7f'. Noted by Ben LaHaise.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:09:52 -05:00
Ingo Molnar
33d3f07ae1 Input: atkbd - semaphore to mutex conversion
The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-19 00:22:18 -05:00
Dmitry Torokhov
dbc2634435 Input: atkbd - don't lose keymap settings when reconnecting keyboard
Call serio_reconnect() instead of serio_rescan() when detecting that
a new keyboard was plugged in. This should help KVM uses losing custom
keymap settings when switching between boxes.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-05 23:00:13 -05:00
Dmitry Torokhov
0d4c859734 Input: atkbd - speed up setting leds/repeat state
Changing led state is pretty slow operation; when there are multiple
requests coming at a high rate they may interfere with normal typing.
Try optimize (skip) changing hardware state when multiple requests
are coming back-to-back.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-11-20 00:49:42 -05:00
Dmitry Torokhov
3c42f0c3dd [PATCH] drivers/input/keyboard: convert to dynamic input_dev allocation
Input: convert drivers/input/keyboard to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Vojtech Pavlik
903b126bff Input: atkbd - handle keyboards generating scancode 0x7f
Extend bat_xl handling to do err_xl handling, so that
keyboards using 0x7f scancode for regular keys can work.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-09-05 00:11:41 -05:00
Linus Torvalds
3e0777b8fa Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/dtor/input.git manually
Some manual fixups required due to clashes with the PF_FREEZE cleanups.
2005-06-27 14:47:31 -07:00
Yani Ioannou
e404e274f6 [PATCH] Driver Core: drivers/i2c/chips/w83781d.c - drivers/s390/block/dcssblk.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:34 -07:00
Vojtech Pavlik
a86d1f4301 [PATCH] input: disable scroll feature on AT keyboards
This patch disables the scroll feature on AT keyboards by default, because
it causes the numbers of mouse devices to shift, breaking user setups.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-07 13:39:26 -07:00
Dmitry Torokhov
d083e90660 Input: whitespace fixes in drivers/input/keyboard
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29 02:28:42 -05:00
Vojtech Pavlik
7d6064d44b Input: Fix fast scrolling scancodes in atkbd.c
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29 01:27:44 -05:00
Vojtech Pavlik
5212dd58e6 [PATCH] input: Fix fast scrolling scancodes in atkbd.c
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-28 16:46:09 -07:00
Adrian Bunk
53b21689ba [PATCH] drivers/input/keyboard/atkbd.c: fix off by one errors
This patch fixes two possible off by one errors found by the Coverity
checker (look at the period[i] and delay[j] in the two first unchanged
lines).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:17 -07:00
Paul E. McKenney
fbd568a3e6 [PATCH] Change synchronize_kernel to _rcu and _sched
This patch changes calls to synchronize_kernel(), deprecated in the earlier
"Deprecate synchronize_kernel, GPL replacement" patch to instead call the new
synchronize_rcu() and synchronize_sched() APIs.

Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:04 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00