Commit graph

539 commits

Author SHA1 Message Date
NeilBrown
f416885ef4 [PATCH] md: add support for reshape of a raid6
i.e. one or more drives can be added and the array will re-stripe
while on-line.

Most of the interesting work was already done for raid5.  This just extends it
to raid6.

mdadm newer than 2.6 is needed for complete safety, however any version of
mdadm which support raid5 reshape will do a good enough job in almost all
cases (an 'echo repair > /sys/block/mdX/md/sync_action' is recommended after a
reshape that was aborted and had to be restarted with an such a version of
mdadm).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
NeilBrown
b4c4c7b809 [PATCH] md: restart a (raid5) reshape that has been aborted due to a read/write error
An error always aborts any resync/recovery/reshape on the understanding that
it will immediately be restarted if that still makes sense.  However a reshape
currently doesn't get restarted.  With this patch it does.

To avoid restarting when it is not possible to do work, we call into the
personality to check that a reshape is ok, and strengthen raid5_check_reshape
to fail if there are too many failed devices.

We also break some code out into a separate function: remove_and_add_spares as
the indent level for that code was getting crazy.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
NeilBrown
d1b5380c7f [PATCH] md: clean out unplug and other queue function on md shutdown
The mddev and queue might be used for another array which does not set these,
so they need to be cleared.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
NeilBrown
7dd5e7c3db [PATCH] md: move warning about creating a raid array on partitions of the one device
md tries to warn the user if they e.g.  create a raid1 using two partitions of
the same device, as this does not provide true redundancy.

However it also warns if a raid0 is created like this, and there is nothing
wrong with that.

At the place where the warning is currently printer, we don't necessarily know
what level the array will be, so move the warning from the point where the
device is added to the point where the array is started.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
H. Peter Anvin
a723406c4a [PATCH] md: RAID6: clean up CPUID and FPU enter/exit code
- Use kernel_fpu_begin() and kernel_fpu_end()
- Use boot_cpu_has() for feature testing even in userspace

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
NeilBrown
64a742bc61 [PATCH] md: fix raid10 recovery problem.
There are two errors that can lead to recovery problems with raid10
when used in 'far' more (not the default).

Due to a '>' instead of '>=' the wrong block is located which would result in
garbage being written to some random location, quite possible outside the
range of the device, causing the newly reconstructed device to fail.

The device size calculation had some rounding errors (it didn't round when it
should) and so recovery would go a few blocks too far which would again cause
a write to a random block address and probably a device error.

The code for working with device sizes was fairly confused and spread out, so
this has been tided up a bit.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
Eric W. Biederman
0b4d414714 [PATCH] sysctl: remove insert_at_head from register_sysctl
The semantic effect of insert_at_head is that it would allow new registered
sysctl entries to override existing sysctl entries of the same name.  Which is
pain for caching and the proc interface never implemented.

I have done an audit and discovered that none of the current users of
register_sysctl care as (excpet for directories) they do not register
duplicate sysctl entries.

So this patch simply removes the support for overriding existing entries in
the sys_sysctl interface since no one uses it or cares and it makes future
enhancments harder.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Corey Minyard <minyard@acm.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:59 -08:00
Eric W. Biederman
ff1d28efc5 [PATCH] sysctl: md: remove unnecessary insert_at_head flag
The sysctls used by the md driver are have unique binary numbers so remove the
insert_at_head flag as it serves no useful purpose.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:55 -08:00
Arjan van de Ven
fa027c2a0a [PATCH] mark struct file_operations const 4
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

[akpm@sdl.org: dvb fix]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:45 -08:00
Andrew Morton
fc0ecff698 [PATCH] remove invalidate_inode_pages()
Convert all calls to invalidate_inode_pages() into open-coded calls to
invalidate_mapping_pages().

Leave the invalidate_inode_pages() wrapper in place for now, marked as
deprecated.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:31 -08:00
Neil Brown
da6e1a32fb [PATCH] md: avoid possible BUG_ON in md bitmap handling
md/bitmap tracks how many active write requests are pending on blocks
associated with each bit in the bitmap, so that it knows when it can clear
the bit (when count hits zero).

The counter has 14 bits of space, so if there are ever more than 16383, we
cannot cope.

Currently the code just calles BUG_ON as "all" drivers have request queue
limits much smaller than this.

However is seems that some don't.  Apparently some multipath configurations
can allow more than 16383 concurrent write requests.

So, in this unlikely situation, instead of calling BUG_ON we now wait
for the count to drop down a bit.  This requires a new wait_queue_head,
some waiting code, and a wakeup call.

Tested by limiting the counter to 20 instead of 16383 (writes go a lot slower
in that case...).

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:25:47 -08:00
Neil Brown
387bb17374 [PATCH] md: fix various bugs with aligned reads in RAID5
It is possible for raid5 to be sent a bio that is too big for an underlying
device.  So if it is a READ that we pass stright down to a device, it will
fail and confuse RAID5.

So in 'chunk_aligned_read' we check that the bio fits within the parameters
for the target device and if it doesn't fit, fall back on reading through
the stripe cache and making lots of one-page requests.

Note that this is the earliest time we can check against the device because
earlier we don't have a lock on the device, so it could change underneath
us.

Also, the code for handling a retry through the cache when a read fails has
not been tested and was badly broken.  This patch fixes that code.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: "Kai" <epimetreus@fastmail.fm>
Cc: <stable@suse.de>
Cc: <org@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:25:46 -08:00
NeilBrown
c20086de93 [PATCH] md: remove unnecessary printk when raid5 gets an unaligned read.
raid5_mergeable_bvec tries to ensure that raid5 never sees a read request
that does not fit within just one chunk.  However as we must always accept
a single-page read, that is not always possible.

So when "in_chunk_boundary" fails, it might be unusual, but it is not a
problem and printing a message every time is a bad idea.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:51:00 -08:00
NeilBrown
2a2275d630 [PATCH] md: fix potential memalloc deadlock in md
If a GFP_KERNEL allocation is attempted in md while the mddev_lock is held,
it is possible for a deadlock to eventuate.

This happens if the array was marked 'clean', and the memalloc triggers a
write-out to the md device.

For the writeout to succeed, the array must be marked 'dirty', and that
requires getting the mddev_lock.

So, before attempting a GFP_KERNEL allocation while holding the lock, make
sure the array is marked 'dirty' (unless it is currently read-only).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:51:00 -08:00
Jun'ichi Nomura
bfa152fa5e [PATCH] dm-multipath: fix stall on noflush suspend/resume
Allow noflush suspend/resume of device-mapper device only for the case
where the device size is unchanged.

Otherwise, dm-multipath devices can stall when resumed if noflush was used
when suspending them, all paths have failed and queue_if_no_path is set.

Explanation:
 1. Something is doing fsync() on the block dev,
    holding inode->i_sem
 2. The fsync write is blocked by all-paths-down and queue_if_no_path
 3. Someone requests to suspend the dm device with noflush.
    Pending writes are left in queue.
 4. In the middle of dm_resume(), __bind() tries to get
    inode->i_sem to do __set_size() and waits forever.

'noflush suspend' is a new device-mapper feature introduced in
early 2.6.20. So I hope the fix being included before 2.6.20 is
released.

Example of reproducer:
 1. Create a multipath device by dmsetup
 2. Fail all paths during mkfs
 3. Do dmsetup suspend --noflush and load new map with healthy paths
 4. Do dmsetup resume

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:51:00 -08:00
NeilBrown
f49d5e62d9 [PATCH] md: avoid reading past the end of a bitmap file
In most cases we check the size of the bitmap file before reading data from
it.  However when reading the superblock, we always read the first PAGE_SIZE
bytes, which might not always be appropriate.  So limit that read to the size
of the file if appropriate.

Also, we get the count of available bytes wrong in one place, so that too can
read past the end of the file.

Cc: "yang yin" <yinyang801120@gmail.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:59 -08:00
NeilBrown
1031be7a5f [PATCH] md: make sure the events count in an md array never returns to zero
Now that we sometimes step the array events count backwards (when
transitioning dirty->clean where nothing else interesting has happened - so
that we don't need to write to spares all the time), it is possible for the
event count to return to zero, which is potentially confusing and triggers and
MD_BUG.

We could possibly remove the MD_BUG, but is just as easy, and probably safer,
to make sure we never return to zero.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:59 -08:00
NeilBrown
3eda22d19b [PATCH] md: make 'repair' actually work for raid1
When 'repair' finds a block that is different one the various parts of the
mirror.  it is meant to write a chosen good version to the others.  However it
currently writes out the original data to each.  The memcpy to make all the
data the same is missing.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:59 -08:00
Lars Ellenberg
e3881a6816 [PATCH] md: pass down BIO_RW_SYNC in raid{1,10}
md raidX make_request functions strip off the BIO_RW_SYNC flag, thus
introducing additional latency.

Fixing this in raid1 and raid10 seems to be straightforward enough.

For our particular usage case in DRBD, passing this flag improved some
initialization time from ~5 minutes to ~5 seconds.

Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Lars Ellenberg <lars@linbit.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-11 18:18:21 -08:00
NeilBrown
3f9d7b0d81 [PATCH] md: fix a few problems with the interface (sysfs and ioctl) to md
While developing more functionality in mdadm I found some bugs in md...

- When we remove a device from an inactive array (write 'remove' to
  the 'state' sysfs file - see 'state_store') would should not
  update the superblock information - as we may not have
  read and processed it all properly yet.

- initialise all raid_disk entries to '-1' else the 'slot sysfs file
  will claim '0' for all devices in an array before the array is
  started.

- all '\n' not to be present at the end of words written to
  sysfs files

- when we use SET_ARRAY_INFO to set the md metadata version,
  set the flag to say that there is persistant metadata.

- allow GET_BITMAP_FILE to be called on an array that hasn't
  been started yet.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-22 08:55:51 -08:00
NeilBrown
802ba064c4 [PATCH] md: Don't assume that READ==0 and WRITE==1 - use the names explicitly
Thanks Jens for alerting me to this.

Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: <raziebe@gmail.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:48 -08:00
Herbert Xu
3263263f70 [CRYPTO] dm-crypt: Select CRYPTO_CBC
As CBC is the default chaining method for cryptoloop, we should select
it from cryptoloop to ease the transition.  Spotted by Rene Herman.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 10:18:57 -08:00
NeilBrown
1757128438 [PATCH] md: assorted md and raid1 one-liners
Fix few bugs that meant that:
  - superblocks weren't alway written at exactly the right time (this
    could show up if the array was not written to - writting to the array
    causes lots of superblock updates and so hides these errors).

  - restarting device recovery after a clean shutdown (version-1 metadata
    only) didn't work as intended (or at all).

1/ Ensure superblock is updated when a new device is added.
2/ Remove an inappropriate test on MD_RECOVERY_SYNC in md_do_sync.
   The body of this if takes one of two branches depending on whether
   MD_RECOVERY_SYNC is set, so testing it in the clause of the if
   is wrong.
3/ Flag superblock for updating after a resync/recovery finishes.
4/ If we find the neeed to restart a recovery in the middle (version-1
   metadata only) make sure a full recovery (not just as guided by
   bitmaps) does get done.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:21 -08:00
NeilBrown
c2b00852fb [PATCH] md: return a non-zero error to bi_end_io as appropriate in raid5
Currently raid5 depends on clearing the BIO_UPTODATE flag to signal an error
to higher levels.  While this should be sufficient, it is safer to explicitly
set the error code as well - less room for confusion.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:21 -08:00
NeilBrown
b8c6b64556 [PATCH] md: remove some old ifdefed-out code from raid5.c
There are some vestiges of old code that was used for bypassing the stripe
cache on reads in raid5.c.  This was never updated after the change from
buffer_heads to bios, but was left as a reminder.

That functionality has nowe been implemented in a completely different way, so
the old code can go.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:21 -08:00
Jeff Garzik
fdee8ae449 [PATCH] MD: conditionalize some code
The autorun code is only used if this module is built into the static
kernel image.  Adjust #ifdefs accordingly.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:21 -08:00
NeilBrown
b875e531fc [PATCH] md: fix innocuous bug in raid6 stripe_to_pdidx
stripe_to_pdidx finds the index of the parity disk for a given stripe.  It
assumes raid5 in that it uses "disks-1" to determine the number of data disks.

This is incorrect for raid6 but fortunately the two usages cancel each other
out.  The only way that 'data_disks' affects the calculation of pd_idx in
raid5_compute_sector is when it is divided into the sector number.  But as
that sector number is calculated by multiplying in the wrong value of
'data_disks' the division produces the right value.

So it is innocuous but needs to be fixed.

Also change the calculation of raid_disks in compute_blocknr to make it
more obviously correct (it seems at first to always use disks-1 too).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:21 -08:00
Raz Ben-Jehuda(caro)
5248861511 [PATCH] md: enable bypassing cache for reads
Call the chunk_aligned_read where appropriate.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:20 -08:00
Raz Ben-Jehuda(caro)
46031f9a38 [PATCH] md: allow reads that have bypassed the cache to be retried on failure
If a bypass-the-cache read fails, we simply try again through the cache.  If
it fails again it will trigger normal recovery precedures.

update 1:

From: NeilBrown <neilb@suse.de>

1/
  chunk_aligned_read and retry_aligned_read assume that
      data_disks == raid_disks - 1
  which is not true for raid6.
  So when an aligned read request bypasses the cache, we can get the wrong data.

2/ The cloned bio is being used-after-free in raid5_align_endio
   (to test BIO_UPTODATE).

3/ We forgot to add rdev->data_offset when submitting
   a bio for aligned-read

4/ clone_bio calls blk_recount_segments and then we change bi_bdev,
   so we need to invalidate the segment counts.

5/ We don't de-reference the rdev when the read completes.
   This means we need to record the rdev to so it is still
   available in the end_io routine.  Fortunately
   bi_next in the original bio is unused at this point so
   we can stuff it in there.

6/ We leak a cloned bio if the target rdev is not usable.

From: NeilBrown <neilb@suse.de>

update 2:

1/ When aligned requests fail (read error) they need to be retried
   via the normal method (stripe cache).  As we cannot be sure that
   we can process a single read in one go (we may not be able to
   allocate all the stripes needed) we store a bio-being-retried
   and a list of bioes-that-still-need-to-be-retried.
   When find a bio that needs to be retried, we should add it to
   the list, not to single-bio...

2/ We were never incrementing 'scnt' when resubmitting failed
   aligned requests.

[akpm@osdl.org: build fix]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:20 -08:00
Raz Ben-Jehuda(caro)
f679623f50 [PATCH] md: handle bypassing the read cache (assuming nothing fails)
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:20 -08:00
Raz Ben-Jehuda(caro)
23032a0eb9 [PATCH] md: define raid5_mergeable_bvec
This will encourage read request to be on only one device, so we will often be
able to bypass the cache for read requests.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:20 -08:00
NeilBrown
0d4ca600fc [PATCH] md: tidy up device-change notification when an md array is stopped
An md array can be stopped leaving all the setting still in place, or it can
torn down and destroyed.  set_capacity and other change notifications only
happen in the latter case, but should happen in both.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:20 -08:00
Adrian Bunk
c642f9e03b [PATCH] make drivers/md/dm-snap.c:ksnapd static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:09 -08:00
Jonathan E Brassow
88b20a1a71 [PATCH] dm: raid1: reset sync_search on resume
Reset sync_search on resume.  The effect is to retry syncing all out-of-sync
regions when a mirror is resumed, including ones that previously failed.

Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:09 -08:00
Jonathan E Brassow
f3ee6b2f62 [PATCH] dm: log: rename complete_resync_work
The complete_resync_work function only provides the ability to change an
out-of-sync region to in-sync.  This patch enhances the function to allow us
to change the status from in-sync to out-of-sync as well, something that is
needed when a mirror write to one of the devices or an initial resync on a
given region fails.

Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:09 -08:00
Milan Broz
31c93a0c29 [PATCH] dm: snapshot: abstract memory release
Move the code that releases memory used by a snapshot into a separate function.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:09 -08:00
Kiyoshi Ueda
45e157206c [PATCH] dm: mpath: use noflush suspending
Implement the pushback feature for the multipath target.

The pushback request is used when:
  1) there are no valid paths;
  2) queue_if_no_path was set;
  3) a suspend is being issued with the DMF_NOFLUSH_SUSPENDING flag.
     Otherwise bios are returned to applications with -EIO.

To check whether queue_if_no_path is specified or not, you need to check
both queue_if_no_path and saved_queue_if_no_path, because presuspend saves
the original queue_if_no_path value to saved_queue_if_no_path.

The check for 1 already exists in both map_io() and do_end_io().
So this patch adds __must_push_back() to check 2 and 3.

Test results:
See the test results in the preceding patch.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:09 -08:00
Kiyoshi Ueda
2e93ccc193 [PATCH] dm: suspend: add noflush pushback
In device-mapper I/O is sometimes queued within targets for later processing.
For example the multipath target can be configured to store I/O when no paths
are available instead of returning it -EIO.

This patch allows the device-mapper core to instruct a target to transfer the
contents of any such in-target queue back into the core.  This frees up the
resources used by the target so the core can replace that target with an
alternative one and then resend the I/O to it.  Without this patch the only
way to change the target in such circumstances involves returning the I/O with
an error back to the filesystem/application.  In the multipath case, this
patch will let us add new paths for existing I/O to try after all the existing
paths have failed.

    DMF_NOFLUSH_SUSPENDING
    ----------------------

If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the
DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend().  It
is always cleared before dm_suspend() returns.

The flag must be visible while the target is flushing pending I/Os so it
is set before presuspend where the flush starts and unset after the wait
for md->pending where the flush ends.

Target drivers can check this flag by calling dm_noflush_suspending().

    DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE
    -----------------------------------

A target's map() function can now return DM_MAPIO_REQUEUE to request the
device mapper core queue the bio.

Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request
the same.  This has been labelled 'pushback'.

The __map_bio() and clone_endio() functions in the core treat these return
values as errors and call dec_pending() to end the I/O.

    dec_pending
    -----------

dec_pending() saves the pushback request in struct dm_io->error.  Once all
the split clones have ended, dec_pending() will put the original bio on
the md->pushback list.  Note that this supercedes any I/O errors.

It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while
in progress (e.g. by user interrupt).  dec_pending() checks for this and
returns -EIO if it happened.

    pushdback list and pushback_lock
    --------------------------------

The bio is queued on md->pushback temporarily in dec_pending(), and after
all pending I/Os return, md->pushback is merged into md->deferred in
dm_suspend() for re-issuing at resume time.

md->pushback_lock protects md->pushback.
The lock should be held with irq disabled because dec_pending() can be
called from interrupt context.

Queueing bios to md->pushback in dec_pending() must be done atomically
with the check for DMF_NOFLUSH_SUSPENDING flag.  So md->pushback_lock is
held when checking the flag.  Otherwise dec_pending() may queue a bio to
md->pushback after the interrupted dm_suspend() flushes md->pushback.
Then the bio would be left in md->pushback.

Flag setting in dm_suspend() can be done without md->pushback_lock because
the flag is checked only after presuspend and the set value is already
made visible via the target's presuspend function.

The flag can be checked without md->pushback_lock (e.g. the first part of
the dec_pending() or target drivers), because the flag is checked again
with md->pushback_lock held when the bio is really queued to md->pushback
as described above.  So even if the flag is cleared after the lockless
checkings, the bio isn't left in md->pushback but returned to applications
with -EIO.

    Other notes on the current patch
    --------------------------------

- md->pushback is added to the struct mapped_device instead of using
  md->deferred directly because md->io_lock which protects md->deferred is
  rw_semaphore and can't be used in interrupt context like dec_pending(),
  and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too.

- Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG
  ioctl option is specified, because I/Os generated by lock_fs() would be
  pushed back and never return if there were no valid devices.

- If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING
  flag is set, md->pushback must be flushed because I/Os may be queued to
  the list already.  (flush_and_out label in dm_suspend())

    Test results
    ------------

I have tested using multipath target with the next patch.

The following tests are for regression/compatibility:
  - I/Os succeed when valid paths exist;
  - I/Os fail when there are no valid paths and queue_if_no_path is not
    set;
  - I/Os are queued in the multipath target when there are no valid paths and
    queue_if_no_path is set;
  - The queued I/Os above fail when suspend is issued without the
    DM_NOFLUSH_FLAG ioctl option.  I/Os spanning 2 multipath targets also
    fail.

The following tests are for the normal code path of new pushback feature:
  - Queued I/Os in the multipath target are flushed from the target
    but don't return when suspend is issued with the DM_NOFLUSH_FLAG
    ioctl option;
  - The I/Os above are queued in the multipath target again when
    resume is issued without path recovery;
  - The I/Os above succeed when resume is issued after path recovery
    or table load;
  - Queued I/Os in the multipath target succeed when resume is issued
    with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os
    spanning 2 multipath targets also succeed.

The following tests are for the error paths of the new pushback feature:
  - When the bdget_disk() fails in dm_suspend(), the
    DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the
    pushback list are flushed properly.
  - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted,
      o I/Os which had already been queued to the pushback list
        at the time don't return, and are re-issued at resume time;
      o I/Os which hadn't been returned at the time return with EIO.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:09 -08:00
Kiyoshi Ueda
81fdb096db [PATCH] dm: ioctl: add noflush suspend
Provide a dm ioctl option to request noflush suspending.  (See next patch for
what this is for.) As the interface is extended, the version number is
incremented.

Other than accepting the new option through the interface, There is no change
to existing behaviour.

Test results:
Confirmed the option is given from user-space correctly.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:09 -08:00
Kiyoshi Ueda
d2a7ad29a8 [PATCH] dm: map and endio symbolic return codes
Update existing targets to use the new symbols for return values from target
map and end_io functions.

There is no effect on behaviour.

Test results:
Done build test without errors.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:09 -08:00
Kiyoshi Ueda
45cbcd7983 [PATCH] dm: map and endio return code clarification
Tighten the use of return values from the target map and end_io functions.
Values of 2 and above are now explictly reserved for future use.  There are no
existing targets using such values.

The patch has no effect on existing behaviour.

o Reserve return values of 2 and above from target map functions.
  Any positive value currently indicates "mapping complete", but all
  existing drivers use the value 1.  We now make that a requirement
  so we can assign new meaning to higher values in future.

  The new definition of return values from target map functions is:
      < 0 : error
      = 0 : The target will handle the io (DM_MAPIO_SUBMITTED).
      = 1 : Mapping completed (DM_MAPIO_REMAPPED).
      > 1 : Reserved (undefined).  Previously this was the same as '= 1'.

o Reserve return values of 2 and above from target end_io functions
  for similar reasons.
  DM_ENDIO_INCOMPLETE is introduced for a return value of 1.

Test results:

  I have tested by using the multipath target.

  I/Os succeed when valid paths exist.

  I/Os are queued in the multipath target when there are no valid paths and
queue_if_no_path is set.

  I/Os fail when there are no valid paths and queue_if_no_path is not set.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:09 -08:00
Kiyoshi Ueda
a3d77d35be [PATCH] dm: suspend: parameter change
Change the interface of dm_suspend() so that we can pass several options
without increasing the number of parameters.  The existing 'do_lockfs' integer
parameter is replaced by a flag DM_SUSPEND_LOCKFS_FLAG.

There is no functional change to the code.

Test results:
I have tested 'dmsetup suspend' command with/without the '--nolockfs'
option and confirmed the do_lockfs value is correctly set.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:09 -08:00
Kiyoshi Ueda
7485936463 [PATCH] dm: tidy core formatting
Remove unnecessary spaces in dm.c.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:08 -08:00
Heinz Mauelshagen
f00b16ad66 [PATCH] dm io: fix bi_max_vecs
The existing code allocates an extra slot in bi_io_vec[] and uses it to store
the region number.

This patch hides the extra slot from bio_add_page() so the region number can't
get overwritten.

Also remove a hard-coded SECTOR_SHIFT and fix a typo in a comment.

Signed-off-by: Heinz Mauelshagen <hjm@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Milan Broz <mbroz@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:08 -08:00
David Howells
f0d1b0b30d [PATCH] LOG2: Implement a general integer log2 facility in the kernel
This facility provides three entry points:

	ilog2()		Log base 2 of unsigned long
	ilog2_u32()	Log base 2 of u32
	ilog2_u64()	Log base 2 of u64

These facilities can either be used inside functions on dynamic data:

	int do_something(long q)
	{
		...;
		y = ilog2(x)
		...;
	}

Or can be used to statically initialise global variables with constant values:

	unsigned n = ilog2(27);

When performing static initialisation, the compiler will report "error:
initializer element is not constant" if asked to take a log of zero or of
something not reducible to a constant.  They treat negative numbers as
unsigned.

When not dealing with a constant, they fall back to using fls() which permits
them to use arch-specific log calculation instructions - such as BSR on
x86/x86_64 or SCAN on FRV - if available.

[akpm@osdl.org: MMC fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Howells <dhowells@redhat.com>
Cc: Wojtek Kaniewski <wojtekka@toxygen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:51 -08:00
Josef Sipek
c649bb9c55 [PATCH] struct path: convert md
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:47 -08:00
Josef "Jeff" Sipek
c922d5f7f5 [PATCH] struct path: rename DM's struct path
Rename DM's struct path to struct dm_path to prevent name collision between it
and struct path from fs/namei.c.

Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Cc: <reiserfs-dev@namesys.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:40 -08:00
NeilBrown
d63a5a74de [PATCH] lockdep: avoid lockdep warning in md
md_open takes ->reconfig_mutex which causes lockdep to complain.  This
(normally) doesn't have deadlock potential as the possible conflict is with a
reconfig_mutex in a different device.

I say "normally" because if a loop were created in the array->member hierarchy
a deadlock could happen.  However that causes bigger problems than a deadlock
and should be fixed independently.

So we flag the lock in md_open as a nested lock.  This requires defining
mutex_lock_interruptible_nested.

Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:39 -08:00
Peter Zijlstra
2e7b651df1 [PATCH] remove the old bd_mutex lockdep annotation
Remove the old complex and crufty bd_mutex annotation.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:38 -08:00
Linus Torvalds
2685b267bc Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (48 commits)
  [NETFILTER]: Fix non-ANSI func. decl.
  [TG3]: Identify Serdes devices more clearly.
  [TG3]: Use msleep.
  [TG3]: Use netif_msg_*.
  [TG3]: Allow partial speed advertisement.
  [TG3]: Add TG3_FLG2_IS_NIC flag.
  [TG3]: Add 5787F device ID.
  [TG3]: Fix Phy loopback.
  [WANROUTER]: Kill kmalloc debugging code.
  [TCP] inet_twdr_hangman: Delete unnecessary memory barrier().
  [NET]: Memory barrier cleanups
  [IPSEC]: Fix inetpeer leak in ipv4 xfrm dst entries.
  audit: disable ipsec auditing when CONFIG_AUDITSYSCALL=n
  audit: Add auditing to ipsec
  [IRDA] irlan: Fix compile warning when CONFIG_PROC_FS=n
  [IrDA]: Incorrect TTP header reservation
  [IrDA]: PXA FIR code device model conversion
  [GENETLINK]: Fix misplaced command flags.
  [NETLIK]: Add a pointer to the Generic Netlink wiki page.
  [IPV6] RAW: Don't release unlocked sock.
  ...
2006-12-07 09:05:15 -08:00