Commit graph

2113 commits

Author SHA1 Message Date
Michael Chan
bbadf503d7 [TG3]: Speed up SRAM access (2nd version)
Speed up SRAM read and write functions if possible by using MMIO
instead of config. cycles. With this change, the post reset signature
done at the end of D3 power change must now be moved before the D3
power change.

IBM reported a problem on powerpc blades during ethtool self test that
was caused by the memory test taking excessively long. Config.  cycles
are very slow on powerpc and the memory test can take more than 10
seconds to complete using config. cycles.

David Miller informed me that an earlier version of the patch caused
problems on sparc64 systems with built-in tg3 chips. This version
fixes the problem by excluding all SUN built-in tg3 chips from doing
MMIO SRAM access.

TG3_FLAG_EEPROM_WRITE_PROT is also set unconditionally when
TG3_FLG2_SUN_570X is set. This should be sane as all SUN chips are
built-in and do not require Vaux switching.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09 22:25:46 -07:00
Michael Chan
d2d746f83b [TG3]: Kill some less useful flags
Kill the TG3_FLAG_NO_{TX|RX}_PSEUDO_CSUM flags because they are not
very useful. This will free up some bits for new flags.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09 22:25:44 -07:00
Samuel Ortiz
137dc0233f [IRDA]: Support for Sigmatel STIR421x chip
This patch enables support for the Sigmatel's STIR421x IrDA chip.
Once patched with Sigmatel's firmware, this chip "almost" follows the
USB-IrDA spec. Thus this patch is against irda-usb.[ch].

The code has been tested by Nick Fedchik on an STIR4210 chipset based
dongle.

Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09 22:25:31 -07:00
Linus Walleij
c1e14a6ea2 [IRDA]: smcinit merged into smsc-ircc driver
This patch integrates the smcinit code into the smsc-ircc driver.
Some laptops have their smsc-ircc chip not properly configured by the
BIOS and needs some preconfiguration. Currently, this can be done from
userspace with smcinit, a utility that comes with the irda-utils
package. It messes with ioports and PCI settings, from userspace.  Now
with this patch, if we happen to be on one of the known to be faulty
laptops, we preconfigure the chip from the driver.

Patch from Linus Walleij <triad@df.lth.se>
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09 22:25:30 -07:00
Adrian Bunk
ad96b485b4 [TG3]: Fix a memory leak.
This patch fixes a memory leak (buf wasn't freed) spotted by the
Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09 22:25:27 -07:00
Randy Dunlap
d938ab44c0 [NET] netconsole: set .name in struct console
Set .name in netconsole's struct console to identify the
struct's owner.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09 22:25:25 -07:00
Linus Torvalds
63589ed078 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (48 commits)
  Documentation: fix minor kernel-doc warnings
  BUG_ON() Conversion in drivers/net/
  BUG_ON() Conversion in drivers/s390/net/lcs.c
  BUG_ON() Conversion in mm/slab.c
  BUG_ON() Conversion in mm/highmem.c
  BUG_ON() Conversion in kernel/signal.c
  BUG_ON() Conversion in kernel/signal.c
  BUG_ON() Conversion in kernel/ptrace.c
  BUG_ON() Conversion in ipc/shm.c
  BUG_ON() Conversion in fs/freevxfs/
  BUG_ON() Conversion in fs/udf/
  BUG_ON() Conversion in fs/sysv/
  BUG_ON() Conversion in fs/inode.c
  BUG_ON() Conversion in fs/fcntl.c
  BUG_ON() Conversion in fs/dquot.c
  BUG_ON() Conversion in md/raid10.c
  BUG_ON() Conversion in md/raid6main.c
  BUG_ON() Conversion in md/raid5.c
  Fix minor documentation typo
  BFP->BPF in Documentation/networking/tuntap.txt
  ...
2006-04-02 12:58:45 -07:00
Linus Torvalds
86dca4f8e6 Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (33 commits)
  [PATCH] pcmcia: declare pccard_iodyn_ops (fix m8xx_pcmcia.c compilation error)
  [PATCH] pcmcia: fix pcmcia_device_remove oops
  [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45
  [PATCH] pcmcia: pseudo device handling update
  [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present
  [PATCH] pcmcia: use bitfield instead of p_state and state
  [PATCH] pcmcia: remove unused p_dev->state flags
  [PATCH] pcmcia: make pcmcia_release_{io,irq} static
  [PATCH] pcmcia: add return value to _config() functions
  [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection
  [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device
  [PATCH] pcmcia: rename pcmcia_device.state
  [PATCH] pcmcia: remove unneeded Vcc pseudo setting
  [PATCH] pcmcia: remove export of pcmcia_release_configuration
  [PATCH] pcmcia: default suspend and resume handling
  [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq
  [PATCH] pcmcia: add pcmcia_disable_device
  [PATCH] serial_cs: add Merlin U630 IDs
  [PATCH] pcmcia: AT91RM9200 Compact Flash driver
  [PATCH] pcmcia: socket.functions starts with 1
  ...
2006-04-02 12:49:59 -07:00
Linus Torvalds
f900e5824a Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
  [PATCH] powerpc: iSeries needs slb_initialize to be called
  powerpc: hook up the splice syscall
  [PATCH] powerpc/cell: compile fixes
  [PATCH] powerpc: trivial spelling fixes in fault.c
  [PATCH] powerpc/pseries: EEH Cleanup
  [PATCH] powerpc/pseries: misc lparcfg fixes
  [PATCH] powerpc/pseries: fix device name printing, again.
  [PATCH] powerpc: Extends HCALL interface for InfiniBand usage
  [PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPS
  [PATCH] powerpc/pseries: print message if EEH recovery fails
  [PATCH] powerpc/pseries: mutex lock to serialize EEH event processing
  powerpc: converted embedded platforms to use new define_machine support
  powerpc: merge machine_check_exception between ppc32 & ppc64
2006-04-02 12:48:36 -07:00
Eric Sesterhenn
5d9428de1a BUG_ON() Conversion in drivers/net/
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-02 13:52:48 +02:00
Segher Boessenkool
706c8c93ba [PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPS
Also cleans up some nearby whitespace problems.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-01 22:36:57 +11:00
Andrew Morton
15901dc93f [NET]: com90xx kmalloc fix
WARNING: "__you_cannot_kzalloc_that_much" [drivers/net/arcnet/com90xx.ko] undefined!

We're trying to allocate negative amounts of memory..

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01 00:49:35 -08:00
David S. Miller
5c516c1019 [TG3]: Update driver version and reldate.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01 00:33:31 -08:00
David S. Miller
758a613936 [TG3]: Revert "Speed up SRAM access"
Undo commit 100c467330

MMIOs timeout more quickly that PCI config cycles and some
of these SRAM accesses can take a very long time, triggering
the MMIO limits on some sparc64 PCI controllers and thus
resulting in bus timeouts and bus errors.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01 00:32:56 -08:00
Steffen Klassert
09ce3512dc [PATCH] 3c59x: fix networking for 10base2 NICs
The "3c59x: use mii_check_media" patch introduced a netif_carrier_off in
vortex_up.  10base2 stoped working because of this.  This is removed.

Tx/Rx reset is back in vortex_up because the 3c900B-Combo stops working after
changing from half duplex to full duplex when Tx/Rx reset is done with
vortex_timer.

Also brought back some mii stuff to be sure that it does not break something
else.

Thanks to Pete Clements <clem@clem.clem-digital.net> for reporting and testing.

Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:55 -08:00
Andrew Morton
0000754c27 [PATCH] "3c59x collision statistics fix" fix
The pre-2.6.16 patch "3c59x collision statistics fix" accidentally caused
vortex_error() to not run iowrite16(TxEnable, ioaddr + EL3_CMD) if we got a
maxCollisions interrupt but MAX_COLLISION_RESET is not set.

Thanks to Pete Clements <clem@clem.clem-digital.net> for reporting and testing.

Acked-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:55 -08:00
OGAWA Hirofumi
9b41046cd0 [PATCH] Don't pass boot parameters to argv_init[]
The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).

And __setup() is used in obsolete_checksetup().

	start_kernel()
		-> parse_args()
			-> unknown_bootoption()
				-> obsolete_checksetup()

If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.

If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func().  If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].

Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.

This patch fixes a wrong usage of it, however fixes obvious one only.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:53 -08:00
Al Viro
694a464e19 [PATCH] uml: kconfigs
kconfig sanitized around drivers/net

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:51 -08:00
Dominik Brodowski
9940ec3617 [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present
Instead of the DEV_OK macro, drivers should use pcmcia_dev_present().

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:57 +02:00
Dominik Brodowski
e2d4096365 [PATCH] pcmcia: use bitfield instead of p_state and state
Instead of the two status values struct pcmcia_device->p_state and state,
use descriptive bitfields. Most value-checking in drivers was invalid, as
the core now only calls the ->remove() (a.k.a. detach) function in case the
attachement _and_ configuration was successful.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:33 +02:00
Dominik Brodowski
f6fbe01ac9 [PATCH] pcmcia: remove unused p_dev->state flags
Remove the unused DEV_RELEASE_PENDING flag, and move the DEV_SUSPEND flag
into the p_dev structure, and make use of it at the core level.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:31 +02:00
Dominik Brodowski
15b99ac172 [PATCH] pcmcia: add return value to _config() functions
Most of the driver initialization isn't done in the .probe function, but in
the internal _config() functions. Make them return a value, so that .probe
can properly report whether the probing of the device succeeded or not.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:06 +02:00
Dominik Brodowski
fba395eee7 [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now.
Therefore, remove all such indirections.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
Dominik Brodowski
fd238232cd [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device
Embed dev_link_t into struct pcmcia_device(), as they basically address the
same entity. The actual contents of dev_link_t will be cleaned up step by step.
This patch includes a bugfix from and signed-off-by Andrew Morton.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:57 +02:00
Dominik Brodowski
70294b4683 [PATCH] pcmcia: remove unneeded Vcc pseudo setting
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and
Vpp2 can only be set to the same value, a lot of code can be
streamlined.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:55 +02:00
Dominik Brodowski
4bbed52314 [PATCH] pcmcia: remove export of pcmcia_release_configuration
Handle the _modifying_ operation sm91c92_cs requires in
pcmcia_modify_configuration, so that the only remaining users
of pcmcia_release_configuration() are within the pcmcia core
module.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:53 +02:00
Dominik Brodowski
8661bb5b4a [PATCH] pcmcia: default suspend and resume handling
In all but one case, the suspend and resume functions of PCMCIA drivers
contain mostly of calls to pcmcia_release_configuration() and
pcmcia_request_configuration(). Therefore, move this code out of the
drivers and into the core.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:52 +02:00
Dominik Brodowski
50db3fdbbc [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq
Convert the remaining drivers which use pcmcia_release_io or
pcmcia_release_irq, and remove the EXPORT of these symbols.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:51 +02:00
Dominik Brodowski
5f2a71fcb7 [PATCH] pcmcia: add pcmcia_disable_device
pcmcia_disable_device(struct pcmcia_device *p_dev) performs the necessary
cleanups upon device or driver removal: it calls the appropriate
pcmcia_release_* functions, and can replace (most) of the current drivers'
_release() functions.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:50 +02:00
Lennert Buytenhek
5d4fe2c1ce [PATCH] ixp2000: fix gcc4 breakage
gcc4 doesn't like us declaring a static function inside another
function.  We can do away with this construct altogether and use
BUILD_BUG_ON() instead (idea from Andi Kleen.)

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:34:02 -05:00
Gary Zambrano
391fc09a14 [PATCH] b44: ensure valid mac addr
Added code to check for invalid MAC address from eeprom or user input.

Signed-off-by: Gary Zambrano <zambrano@broadcom.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:34:02 -05:00
Linas Vepstas
bc0e1fc970 [PATCH] Janitor: drivers/net/pcnet32: fix incorrect comments
The comments concerning how the pcnet32 ethernet device driver selects
the MAC addr to use are incorrect. A recent patch (in the last 3 months)
changed how the code worked, but did not change the comments.

Side comment: the new behaviour is good; I've got a pcnet32 card which
powers up with garbage in the CSR's, and a good MAC addr in the PROM.

Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:34:02 -05:00
Arthur Othieno
8a91ed60f5 [PATCH] net: remove CONFIG_NET_CBUS conditional for NS8390
Don't bother testing for CONFIG_NET_CBUS ("NEC PC-9800 C-bus cards"); it went
out with the rest of PC98 subarch.

Signed-off-by: Arthur Othieno <apgo@patchbomb.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:34:02 -05:00
Mark Brown
a8b4cf42cf [PATCH] natsemi: Support oversized EEPROMs
The natsemi chip can have a larger EEPROM attached than it itself uses for
configuration.  This patch adds support for user space access to such an
EEPROM.

Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Cc: Tim Hockin <thockin@hockin.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:34:02 -05:00
Jens Osterkamp
8dfc914a3f [PATCH] spidernet : enable tx checksum offloading by default
This enables TX checksum offloading for the spidernet driver by default.

Signed-off-by: Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:34:02 -05:00
Jay Vosburgh
ff59c4563a [PATCH] bonding: support carrier state for master
Add support for the bonding master to specify its carrier state
based upon the state of the slaves.  For 802.3ad, the bond is up if
there is an active, parterned aggregator.  For other modes, the bond is
up if any slaves are up.  Updates driver version to 3.0.3.

	Based on a patch by jamal <hadi@cyberus.ca>.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:34:02 -05:00
Jeff Garzik
e21a2b0cc5 Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2006-03-29 17:30:19 -05:00
Randy Dunlap
8a89334caf [PATCH] acenic: fix section mismatches
Fix section mismatches in acenic driver:
WARNING: drivers/net/acenic.o - Section mismatch: reference to .init.data:tigon2FwText from .text between 'acenic_probe_one' (at offset 0x2409) and 'ace_interrupt'
WARNING: drivers/net/acenic.o - Section mismatch: reference to .init.data:tigon2FwRodata from .text between 'acenic_probe_one' (at offset 0x2422) and 'ace_interrupt'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:28:49 -05:00
Jens Osterkamp
4e5077b62b [PATCH] spidernet : reduce console spam
This patch reduces the message level of the RX ram full messages
from err to debug to prevent spamming the console leaving it in the
logfiles though.

From: Jens Osterkamp <Jens.Osterkamp@de.ibm.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:28:49 -05:00
Roger Luethi
00b428c2ab [PATCH] via-rhine: link state fix
Problems with link state detection have been reported several times in the
past months.

Denis Vlasenko did all the work tracking it down. Jeff Garzik suggested the
proper place for the fix.

When using the mii library, the driver needs to check mii->force_media
and set dev->state accordingly.

Signed-off-by: Roger Luethi <rl@hellgate.ch>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:28:49 -05:00
Komuro
b8ab2dc3e1 [PATCH] axnet_cs.c : add hardware multicast support
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:26:05 -05:00
Gary Zambrano
5c5131297d b44: fix force mac address before ifconfig up
Initializing the b44 MAC & PCI functional blocks in the controller must
occur inside init_one(). This will allow access to the MAC registers.
The controller was being powered up in b44_open() which would not allow
access to the registers before ifconfig was up.
Philip Kohlbecher found this bug.

Signed-off-by: Gary Zambrano <zambrano@broadcom.com>
2006-03-29 17:12:05 -05:00
Linus Torvalds
f3cab8a0b1 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETFILTER]: Rename init functions.
  [TCP]: Fix RFC2465 typo.
  [INET]: Introduce tunnel4/tunnel6
  [NET]: deinline 200+ byte inlines in sock.h
  [ECONET]: Convert away from SOCKOPS_WRAPPED
  [NET]: Fix ipx/econet/appletalk/irda ioctl crashes
  [NET]: Kill Documentation/networking/TODO
  [TG3]: Update version and reldate
  [TG3]: Skip timer code during full lock
  [TG3]: Speed up SRAM access
  [TG3]: Fix PHY loopback on 5700
  [TG3]: Fix bug in 40-bit DMA workaround code
  [TG3]: Fix probe failure due to invalid MAC address
2006-03-29 11:29:33 -08:00
Paul Mackerras
bac30d1a78 Merge ../linux-2.6 2006-03-29 13:24:50 +11:00
Michael Chan
e3a05978f1 [TG3]: Update version and reldate
Update version to 3.55.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:41 -08:00
Michael Chan
f475f163f1 [TG3]: Skip timer code during full lock
Skip the main timer code if interrupts are disabled in the full lock
state.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:39 -08:00
Michael Chan
100c467330 [TG3]: Speed up SRAM access
Speed up SRAM read and write functions if possible by using MMIO
instead of config. cycles. With this change, the post reset signature
done at the end of D3 power change must now be moved before the D3
power change.

IBM reported a problem on powerpc blades during ethtool self test
that was caused by the memory test taking excessively long. Config.
cycles are very slow on powerpc and the memory test can take more
than 10 seconds to complete using config. cycles. As a result, NETDEV
WATCHDOG can be triggered during self test and the chip can end up in
a funny state.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:38 -08:00
Michael Chan
ff18ff0234 [TG3]: Fix PHY loopback on 5700
Fix PHY loopback failure on some 5700 devices.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:37 -08:00
Michael Chan
6728a8e2e1 [TG3]: Fix bug in 40-bit DMA workaround code
Need to check the TG3_FLAG_40BIT_DMA_BUG flag in the workaround code
path instead of device flags.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:36 -08:00
Michael Chan
008652b337 [TG3]: Fix probe failure due to invalid MAC address
Some older bootcode in some devices may report 0 MAC address in
SRAM when booting up from low power state. This patch fixes the
problem by checking for a valid MAC address in SRAM and falling back
to NVRAM if necessary.

Thanks to walt <wa1ter@myrealbox.com> for reporting the problem
and helping to debug it.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:35 -08:00