Commit graph

49342 commits

Author SHA1 Message Date
Baruch Even
bdcac1878c Hostess SV-11 depends on INET
Comtrol Hostess SV-11 driver uses features from INET but doesn't depend on it.
The simple solution is to make it depend on INET as happens for the sealevel
driver.

Fixes bug #7930.

Signed-Off-By: Baruch Even <baruch@ev-en.org>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:39:37 -05:00
Ralf Baechle
f0ba73583a Fix link autonegotiation timer.
Start link negotiation in the open method.  Previously it was started
on driver initialialization and shutdown on close so an ifdown would
have results in closing negotiation for good.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:37:14 -05:00
Stephen Hemminger
8765c125e0 sk98lin: planned removal
Nag message about planned sk98lin removal.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:37:14 -05:00
Gary Zambrano
40ee8c768c B44: increase wait loop
The b44 Enet control disable bit may take longer to clear on some
systems, so the loop count is increased with this patch. Functionality
is not compromised, but a debug message can be seen when the bit is not
cleared within the count value.
Thanks to Vasileios Lourdas who reported the problem.

Signed-off by: Gary Zambrano <zambrano@broadcom.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:37:14 -05:00
Gary Zambrano
97db9ee7ee b44: replace define
Replaced B44_DMA_MASK with DMA_30BIT_MASK.

Signed-off by: Gary Zambrano <zambrano@broadcom.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:37:14 -05:00
Kok, Auke
ca6efb7d6c e1000: allow ethtool to see link status when down
By reading the MAC status register we can detect whether the MAC has
seen the PHY see link. This allows us to show the link properties before
the device is up in ethtool.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:37:14 -05:00
Kok, Auke
1d33e9c606 e1000: remove obsolete custom pci_save_state code
Now that 2.6.19 provides a proper implementation that saves MSI, PCI-E
config space, we can have the e1000 driver use those instead of it's
custom implementation.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:37:14 -05:00
Kok, Auke
d2ed16356f e1000: fix shared interrupt warning message
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:37:14 -05:00
Ahmed S. Darwish
36fe55d6a3 atm: Use ARRAY_SIZE macro when appropriate
Use ARRAY_SIZE macro already defined in kernel.h for ATM
drivers.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: chas williams <chas@cmf.nrl.navy.mil>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:48 -05:00
Jeff Morrow
52edc17f94 bugfixes and new hardware support for arcnet driver
The modifications and bug fixes noted below were done by Realtime Control
Works and Contemporary Control Systems, Inc, Jan 2005.  They were
incorporated into the 2.6 kernel by Jeff Morrow of Sierra Analytics, Feb
2007.  <jmorrow@massspec.com>

The changes have been tested on a Contemporary Controls PCI20U-4000.

Summary of changes:

Arc-rawmode.c:
      rx():
      - Fixed error in received packet lengths; 256 byte packets were
        being received as 257 bytes packets.

      prepare_tx():
      - Fixed error in transmit length calcs; 257 byte packets were being
        transmitted as 260 byte packets.

com20020.c:
      com20020_check():
      - We now load the SETUP2 register if the 'clockm' parameter is
        non-zero, instead of checking for ARC_CAN_10MBIT. The user is
        now responsible for whether or not SETUP2 is loaded.  If the
        clock multiplier is non-zero, this means that the user wants a
        baud rate greater than 2.5Mbps. This is not possible unless the
        SETUP2 register is present (COM20020D, or COM20022). So, we're
        relying on the user to be smart about what kind of chip he's
        dealing with...

com20020-pci.c
      - Added several entries to com20020pci_id_table[].

Signed-off-by: Jeff Morrow <jmorrow@massspec.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:48 -05:00
pcnet32@verizon.net
659dd8351a pcnet32 NAPI no longer experimental
Remove the experimental tag for the pcnet32 NAPI implementation.

Signed-off-by:  Don Fry <pcnet32@verizon.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:48 -05:00
pcnet32@verizon.net
04ce09481b MAINTAINER
After being the defacto maintainer for a couple of years, I can now become the official maintainer.

Signed-off-by:  Don Fry <pcnet32@verizon.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:48 -05:00
Haavard Skinnemoen
140e807dd7 macb: Remove inappropriate spinlocks around mii calls
Remove spin_lock_irqsave() around mii_ethtool_gset, mii_ethtool_sset
and generic_mii_ioctl. These are unnecessary and harmful because
the mii calls may call back into the mdio functions, which may sleep.

Pointed out by David Brownell.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:48 -05:00
Ralf Baechle
daeafdc360 Convert meth to netdev_priv
And while at it loose plenty of useless casts.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:47 -05:00
Stephen Hemminger
62ba7e6cfd sky2: v1.13
New version.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:47 -05:00
Stephen Hemminger
a79abdc6ee sky2: receive error handling improvements
Don't drop oversize frame it might be a VLAN (untagged).
Use different counter for fifo overrun vs fifo error.
Print error on fifo overrrun.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:47 -05:00
Stephen Hemminger
819067916d sky2: transmit timeout
The transmit timeout code could hang, and it would not clear out
problems if the hardware was stuck.  Change the code to effectively do
a device down/up similar to the suspend/resume code.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:47 -05:00
Stephen Hemminger
da4c1ff475 sky2: flow control negotiation for Yukon-FE
The Yukon-FE chip doesn't do gigabit and has a differen PHY internally.
On this chip, phy status register doesn't properly reflect the result
of flow control negotiation. To workaround the problem and avoid having
to have so much chip dependent code; compute the result of flow control
by looking at the local and remote advertised bits.

Signed-off-by: Stephen Hemmminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:47 -05:00
Stephen Hemminger
7a7b518151 sky2: no need to reset pause bits on shutdown
Resetting the pause bits on shutdown is not necessary.
The code was inherited from the vendor driver, and it is currently #ifdef'd
out there as well.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:47 -05:00
Stephen Hemminger
7e7c098221 sky2: dont flush good pause frames
Don't mark pause frames as errors. This problem caused transmitter not
to pause and would effectively take out a gigabit switch because the
it can't handle overrun.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:47 -05:00
Steve Wise
0f4e7b45b9 cxgb3 Fix copyrights in the cxgb3 driver.
Fix copyrights in the cxgb3 driver.

Remove the Open Grid Computing copyright.  It shouldn't be there.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:30:46 -05:00
Sergei Shtylyov
538cc7ee7d gianfar: don't duplicate gfar_error()
It was hardly necessary to repeat most of the code from gfar_error() in
gfar_interrupt(), especially having some inconsistencies between the two.
So, make the gfar_interrupt() just call gfar_error(), and not acknowledge
the interrupts itself as gfar_{receive/transmit/error}() do it anyway.
While at it, also clarify/cleanup debug messages in gfar_error()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:26:45 -05:00
Amit S. Kale
825811749b NetXen: Fix to get the driver working after sparse changes
Signed-off-by: Amit S. Kale <amitkale@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:26:45 -05:00
Richard Knutsson
11cc3bb522 net/wan/pc300too.c: pci_module_init to pci_register_driver
Convert pci_module_init() to pci_register_driver().

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:26:45 -05:00
Jay Cliburn
9cc6d14e90 atl1: bump version number
Bump the version number.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:17:05 -05:00
Chris Snook
e81e557a8f atl1: add L1 device id to pci_ids, then use it
Add device id for the Attansic L1 chip to pci_ids.h, then use it.

Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:17:05 -05:00
Chris Snook
f1e5a1a00d atl1: remove unused define
Remove unused define from atl1_main.c.

Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:16:08 -05:00
Jay Cliburn
fd8c5a7da3 atl1: read MAC address from register
On some Asus motherboards containing the L1 NIC, the MAC address is
written by the BIOS directly to the MAC register during POST, and is
not stored in eeprom.  If we don't succeed in fetching the MAC address
from eeprom or spi, try reading it directly from the MAC register.
Suggested by Xiong Huang.

And do some cleanup while we've got the hood up...

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:16:08 -05:00
Al Viro
a62daa4c75 atl1: fix bad ioread address
An ioread32 statement reads the wrong address.  Fix it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:16:08 -05:00
Jay Cliburn
a1ca14b1f4 atl1: drop NET_PCI from Kconfig
The atl1 driver doesn't need NET_PCI.  Remove it from Kconfig.
Noticed by Chad Sprouse.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:16:08 -05:00
Komuro
e363d138ed PCMCIA-NETDEV : the 2nd argument of el3_interrrupt and smc_interrupt is struct net_device*
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:16:08 -05:00
Andy Fleming
76884679c6 phylib: Add support for Marvell 88e1111S and 88e1145
Changes include:
* New support for 88e1145
* New support for 88e111s
* Fixing 88e1101 driver to not match non-88e1101 PHYs
* Increases in feature support across Marvell PHY product line
* Fixes a bunch of whitespace issues found by Lindent

Signed-off-by: Andrew Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17 15:16:08 -05:00
Jeff Garzik
f630fe2817 Merge branch 'master' into upstream 2007-02-17 15:11:43 -05:00
Jeff Garzik
48c871c1f6 Merge branch 'gfar' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into upstream 2007-02-17 15:09:59 -05:00
Russell King
f69eda00d4 Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale trees 2007-02-17 20:09:53 +00:00
Uwe Kleine-König
b77bfa84c4 [ARM] 4211/1: Provide a defconfig for ns9xxx
This is a follow up for the patch providing the base support for the
ns9xxx machine type.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17 20:05:48 +00:00
Uwe Kleine-König
9918cda523 [ARM] 4210/1: base for new machine type "NetSilicon NS9360"
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17 20:05:45 +00:00
Ben Dooks
78c2644fec [ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PM
S3C2443_PM is not defined in our Kconfig, so
remove the reference from CPU_S3C2443 to stop
the configuration process warning about it.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17 20:04:17 +00:00
James Nelson
86aae08faa Documentation/kernel-docs.txt update.
Signed-off-by: James Nelson <james4765@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:15:38 +01:00
Nicolas Kaiser
e34f80cd86 arch/cris: typo in KERN_INFO
Typo in KERN_INFO.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:12:12 +01:00
Tobias Klauser
c5a69d57eb Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:11:19 +01:00
Patrick Pletscher
0bbfb7c2e4 kernel/printk.c: comment fix
Signed-off-by: Patrick Pletscher <pat@pletscher.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:10:16 +01:00
Jesper Juhl
a8e14b950c update I/O sched Kconfig help texts - CFQ is now default, not AS.
Change I/O scheduler description to correctly show CFQ as being the default
scheduler and not the anticipatory scheduler that previously was default.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:08:22 +01:00
Jesper Juhl
3171470565 Remove duplicate listing of Cris arch from README
Mikael Pettersson pointed out to me that a recent patch of mine (commit
620034c84d), that made some corrections to the
README file, accidentally listed the Cris architecture twice.  Whoops.

This patch removes the duplicate.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:07:02 +01:00
Randy Dunlap
5c811e59ad kbuild: more doc. cleanups
Fix typos/spellos in kbuild/makefiles.txt.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:03:14 +01:00
Randy Dunlap
78f92a82c2 doc: make doc. for maxcpus= more visible
Some people are confused about maxcpus=1 and maxcpus=0,
so put the documentation text from init/main.c into
Documentation/kernel-parameters.txt also.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:58:30 +01:00
Shane Shrybman
4b2d5c0490 drivers/net/eexpress.c: remove duplicate comment
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:56:23 +01:00
John Daiker
edd023d0b8 add a help text for BLK_DEV_GENERIC
This fixes kernel Bugzilla #4933.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:52:10 +01:00
Adrian Bunk
936bb14ce9 correct a dead URL in the IP_MULTICAST help text
Reported in kernel Bugzilla #6216.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:49:13 +01:00
Simon Depiets
6486abbf63 fix the BAYCOM_SER_HDX help text
This fixes kernel Bugzilla #4076.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:42:17 +01:00