Commit graph

149 commits

Author SHA1 Message Date
Linus Torvalds
0d1782144e Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  [JFFS2][XATTR] Fix memory leak in POSIX-ACL support
  fs/jffs2/: make 2 functions static
  [MTD] NAND: Fix broken sharpsl driver
  [JFFS2][XATTR] Fix xd->refcnt race condition
  MTD: kernel-doc fixes + additions
  MTD: fix all kernel-doc warnings
  [MTD] DOC: Fixup read functions and do a little cleanup
2006-07-03 21:29:08 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Thomas Gleixner
27a288677d [MTD] NAND: Fix broken sharpsl driver
Remove the not longer supported NO_VIRTBLOCKS flag and remove
an unused variable while at it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-29 21:25:10 +02:00
Randy Dunlap
844d3b427e MTD: fix all kernel-doc warnings
Fix all kernel-doc warnings in MTD headers and source files:
- add some missing struct fields;
- correct some function parameter names;
- use kernel-doc format for function doc. headers;
- nand_ecc.c contains only exported interfaces, no internal ones;

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-29 08:55:00 +01:00
Thomas Gleixner
6a93096195 [MTD] NAND: Select chip before checking write protect status
The other way round works not really well with boards which have a
static NAND chipselect.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-27 23:24:09 +01:00
Petr Stetiar
0e4ced59de [MTD] NAND: Fix typo in mtd/nand/ts7250.c
I was unable to compile ts7250.c after your refactor commit,
it's a typo probably.

-- ynezz

From: Petr Stetiar <ynezz@true.cz>
Signed-off-by: Thomas Gleixner  <tglx@linutronix.de>
2006-06-27 23:20:48 +01:00
Ben Dooks
2c06a08217 [MTD NAND] s3c2412 support in s3c2410.c
Add support for both the S3C2412 and S3C2412 Samsung SoCs to
the increasingly mis-named s3c2410.c driver.

This currently only supports SLC ECCs, and a chip on nFCE0.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-27 14:35:46 +01:00
Thomas Gleixner
1794c13002 [MTD] NAND: ndfc fix address offset thinko
The rework of the command handling in the nand driver
led to wrong address setting in the command control
function. Use the correct address again.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-22 13:06:43 +02:00
Ben Dooks
99974c62b6 [MTD] NAND: S3C2410 convert prinks to dev_*()s
Convert the use of printk() to the correct dev_info/dev_err
functions

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-21 18:56:34 +02:00
Savin Zlobec
0d420f9d61 [MTD] NAND: Missing fixups
The oob fixups broke a return value and missed one patch from
the Mailing List.

Signed-off-by: Savin Zlobec <savin@epico.si>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-21 13:11:56 +01:00
Thomas Gleixner
7bc3312bef [MTD] NAND: Fix breakage all over the place
Following problems are addressed:

- wrong status caused early break out of nand_wait()
- removed the bogus status check in nand_wait() which
  is a relict of the abandoned support for interrupted
  erase.
- status check moved to the correct place in read_oob
- oob support for syndrom based ecc with strange layouts
- use given offset in the AUTOOOB based oob operations

Partially based on a patch from Vitaly Vool <vwool@ru.mvista.com>
Thanks to Savin Zlobec <savin@epico.si> for tracking down the
status problem.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-20 20:31:24 +01:00
Vitaly Wool
7e4178f90e [PATCH] NAND: fix remaining OOB length calculation
In nand_read_page_syndrome/nand_write_page_syndrome the calculation of
the remaining oob length which is not used by the prepad/ecc/postpad
areas is wrong.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-20 20:31:23 +01:00
Thomas Gleixner
b6d5ee00e3 [MTD] NAND Fixup NDFC merge brokeness
Remove the remains of a broken merge.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-20 20:31:23 +01:00
Ben Dooks
ad3b5fb772 [MTD NAND] S3C2410 driver cleanup
Fix unused variables and commenting since tglx's
new NAND updates

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-19 09:43:23 +01:00
Ben Dooks
d1fef3c5e1 [MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-19 09:29:38 +01:00
David Woodhouse
f9068876f5 [MTD NAND] Fix s3c2410 NAND driver so it at least _looks_ like it compiles
Fix the control bit handling so it even looks like it might work, too.
Bad tglx. No biscuit.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-10 00:53:16 +01:00
Andrew Morton
7e9a0bb00c [MTD] Fix build warnings (and debug build error) in nand_base.c
drivers/mtd/nand/nand_base.c: In function 'nand_transfer_oob':
drivers/mtd/nand/nand_base.c:909: warning: comparison of distinct pointer types lacks a cast
drivers/mtd/nand/nand_base.c: In function 'nand_do_read_oob':
drivers/mtd/nand/nand_base.c:1097: error: 'len' undeclared (first use in this function)
drivers/mtd/nand/nand_base.c:1097: error: (Each undeclared identifier is reported only once
drivers/mtd/nand/nand_base.c:1097: error: for each function it appears in.)
drivers/mtd/nand/nand_base.c: In function 'nand_fill_oob':
drivers/mtd/nand/nand_base.c:1411: warning: comparison of distinct pointer types lacks a cast

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-30 09:06:41 +01:00
Thomas Gleixner
f1a28c0284 [MTD] NAND Expose the new raw mode function and status info to userspace
The raw read/write access to NAND (without ECC) has been changed in the
NAND rework. Expose the new way - setting the file mode via ioctl - to
userspace. Also allow to read out the ecc statistics information so userspace
tools can see that bitflips happened and whether errors where correctable
or not. Also expose the number of bad blocks for the partition, so nandwrite
can check if the data fits into the parition before writing to it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-30 00:37:34 +02:00
Thomas Gleixner
9a1fcdfd4b [MTD] NAND Signal that a bitflip was corrected by ECC
Return -EUCLEAN on read when a bitflip was detected and corrected, so the
clients can react and eventually copy the affected block to a spare one.
Make all in kernel users aware of the change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:51 +02:00
Thomas Gleixner
8593fbc68b [MTD] Rework the out of band handling completely
Hopefully the last iteration on this!

The handling of out of band data on NAND was accompanied by tons of fruitless
discussions and halfarsed patches to make it work for a particular
problem. Sufficiently annoyed by I all those "I know it better" mails and the
resonable amount of discarded "it solves my problem" patches, I finally decided
to go for the big rework. After removing the _ecc variants of mtd read/write
functions the solution to satisfy the various requirements was to refactor the
read/write _oob functions in mtd.

The major change is that read/write_oob now takes a pointer to an operation
descriptor structure "struct mtd_oob_ops".instead of having a function with at
least seven arguments.

read/write_oob which should probably renamed to a more descriptive name, can do
the following tasks:

- read/write out of band data
- read/write data content and out of band data
- read/write raw data content and out of band data (ecc disabled)

struct mtd_oob_ops has a mode field, which determines the oob handling mode.

Aside of the MTD_OOB_RAW mode, which is intended to be especially for
diagnostic purposes and some internal functions e.g. bad block table creation,
the other two modes are for mtd clients:

MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is
described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's
up to the caller to make sure that the byte positions are not used by the ECC
placement algorithms.

MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in
the out of band area which are described by the oobfree tuples in the ecclayout
data structre which is associated to the devicee.

The decision whether data plus oob or oob only handling is done depends on the
setting of the datbuf member of the data structure. When datbuf == NULL then
the internal read/write_oob functions are selected, otherwise the read/write
data routines are invoked.

Tested on a few platforms with all variants. Please be aware of possible
regressions for your particular device / application scenario

Disclaimer: Any whining will be ignored from those who just contributed "hot
air blurb" and never sat down to tackle the underlying problem of the mess in
the NAND driver grown over time and the big chunk of work to fix up the
existing users. The problem was not the holiness of the existing MTD
interfaces. The problems was the lack of time to go for the big overhaul. It's
easy to add more mess to the existing one, but it takes alot of effort to go
for a real solution.

Improvements and bugfixes are welcome!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:51 +02:00
Thomas Gleixner
5bd34c091a [MTD] NAND Replace oobinfo by ecclayout
The nand_oobinfo structure is not fitting the newer error correction
demands anymore. Replace it by struct nand_ecclayout and fixup the users
all over the place. Keep the nand_oobinfo based ioctl for user space
compability reasons.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:50 +02:00
Thomas Gleixner
ff268fb879 [MTD] NAND Consolidate oobinfo handling
The info structure for out of band data was copied into
the mtd structure. Make it a pointer and remove the ability
to set it from userspace. The position of ecc bytes is
defined by the hardware and should not be changed by software.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:49 +02:00
Thomas Gleixner
8be834f762 [MTD] NAND Fix platform structure and NDFC driver
The platform structure was lacking an oobinfo field.
The NDFC driver had some remains from another tree.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:49 +02:00
David Woodhouse
33280eac70 [MTD] AMD Geode NAND support can depend on X86_32; we won't see it on x86_64
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-29 11:24:29 +01:00
Thomas Gleixner
ba0251fe87 [MTD] NAND Consolidate references and add back default name setting
We have a type pointer. Make use of it instead of the error prone nand_ids[i]
reference.

The NAND driver used to set default name settings from the chip ID
string for the device. The feature got lost during the rework. Add it back.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-27 01:02:13 +02:00
Thomas Gleixner
cca3b837bb [MTD] NAND simplify nand_chip_select
nCE setting can be done when the first command is issued to the device.
We keep the deselect functionality as it makes sense to deassert nCE
when the device becomes idle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-27 00:47:18 +02:00
David Woodhouse
29da9cea46 [MTD] Fix thinko in nand_write_page_hwecc()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-26 23:05:44 +01:00
Thomas Gleixner
f75e5097ef [MTD] NAND modularize write function
Modularize the write function and reorganaize the internal buffer
management. Remove obsolete chip options and fixup all affected
users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-26 18:52:08 +02:00
David Woodhouse
e4d222ff18 [MTD] Remove PCI dependency for Geode CS553[56] NAND controller.
PCI is faked on these devices by SMM traps. Don't depend on that --
check for the chipset directly instead.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-26 02:06:27 +01:00
David Woodhouse
c5b553cc2c [MTD] Fix NAND_VERIFY_WRITE case to build with tglx's recent changes
Bad tglx. No biscuit.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-25 13:25:17 +01:00
Thomas Gleixner
f5bbdacc41 [MTD] NAND Modularize read function
Split the core of the read function out and implement
seperate handling functions for software and hardware
ECC.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-25 12:45:27 +01:00
Thomas Gleixner
7314e9e7d5 [MTD] NAND Cleanup oob functions
Cleanup the code in the oob related functions and
make use of the new NO_READRDY flag.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-25 12:45:27 +01:00
Thomas Gleixner
7a30601b3a [MTD] NAND Introduce NAND_NO_READRDY option
The nand driver has a superflous read ready / command
delay in the read functions. This was added to handle
chips which have an automatic read forward. Newer
chips do not have this functionality anymore. Add this
option to avoid the delay / I/O operation. Mark all
large page chips with the new option flag.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-25 12:45:26 +01:00
Thomas Gleixner
04bbd0eafb [MTD] NAND Initialize controller lock and wq only once
The lock simplifying patch did not move the lock and waitqueue
initialization into the controller allocation patch.
This reinitializes waitqueue and spinlocks also for driver
supplied controller stuctures. Move it into the allocation path.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-25 12:45:26 +01:00
Thomas Gleixner
12efdde313 [MTD] NAND fix cmd_ctrl breakage
The cmd_ctrl rework lacks some state transition flags.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-24 23:45:24 +01:00
Thomas Gleixner
ace4dfee56 [MTD] NAND coding style and namespace cleanup
Cleanup the functions which are not going to change in the
next steps.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-24 23:45:24 +01:00
Thomas Gleixner
d470a97c70 [MTD] NAND LED support cleanup
Move the define out of the middle of the code and add an
appropriate comment.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 23:48:57 +02:00
Thomas Gleixner
cad74f2c38 [MTD] NAND remove write_byte/word function from nand_chip
The previous change of the command / hardware control allows to
remove the write_byte/word functions completely, as their only
user were nand_command and nand_command_lp.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 23:28:48 +02:00
Thomas Gleixner
7abd3ef987 [MTD] Refactor NAND hwcontrol to cmd_ctrl
The hwcontrol function enforced a step by step state machine
for any kind of hardware chip access. Let the hardware driver
know which control bits are set and inform it about a change
of the control lines. Let the hardware driver write out the
command and address bytes directly. This gives a peformance
advantage for address bus controlled chips and simplifies the
quirks in the hardware drivers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 23:25:53 +02:00
Thomas Gleixner
3821720d51 [MTD] Export nand_write_raw
The previous _ecc removal / cleanup broke (i)nftl module usage.
Export the missing symbol.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 22:33:52 +02:00
Thomas Gleixner
85b85fee0c [MTD] Mark NAND drivers TOTO and PPChameleon broken
Both drivers can not be fixed and compiled due to missing header files.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 22:03:39 +02:00
Thomas Gleixner
9223a456da [MTD] Remove read/write _ecc variants
MTD clients are agnostic of FLASH which needs ECC suppport.
Remove the functions and fixup the callers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 17:21:03 +02:00
Thomas Gleixner
2528e8cdf3 [MTD] Remove readv/readv_ecc
These functions were never implemented and added only bloat to
partition and concat code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 16:10:00 +02:00
Thomas Gleixner
9d8522df37 [MTD] Remove nand writev support
NAND writev(_ecc) support is not longer necessary. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 16:06:03 +02:00
Thomas Gleixner
0cddd6c258 [MTD] ECC rework broke diskonchip
Fix the diskonchip ecc setup.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 15:59:58 +02:00
Thomas Gleixner
4cbb9b80e1 Merge branch 'master' of /home/tglx/work/kernel/git/mtd-2.6/
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 12:37:31 +02:00
Thomas Gleixner
6dfc6d250d [MTD] NAND modularize ECC
First step of modularizing ECC support.
- Move ECC related functionality into a seperate embedded data structure
- Get rid of the hardware dependend constants to simplify new ECC models

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 12:00:46 +02:00
Thomas Gleixner
7aa65bfd67 [MTD] NAND cleanup nand_scan
Seperate functionality out of nand_scan so the code is more
readable. No functional change. First step of simplifying
the nand driver.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:54:38 +02:00
Thomas Gleixner
58dd8f2bfd [MTD] NAND consolidate data types
The NAND driver used a mix of unsigned char, u_char amd uint8_t
data types. Consolidate to uint8_t usage

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:52:35 +02:00
Thomas Gleixner
2c0a2bed92 [MTD] NAND whitespace and formatting cleanup
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:50:56 +02:00