(cherry-pick from commit 7b60a68529b0d827d26ea3426c2addd071bff789)
We store handle on header of each allocated object so it increases the
size of each object by sizeof(unsigned long).
If zram stores 4096 bytes to zsmalloc(ie, bad compression), zsmalloc needs
4104B-class to add handle.
However, 4104B-class has 1-pages_per_zspage so wasted size by internal
fragment is 8192 - 4104, which is terrible.
So this patch records the handle in page->private on such huge object(ie,
pages_per_zspage == 1 && maxobj_per_zspage == 1) instead of header of each
object so we could use 4096B-class, not 4104B-class.
Bug: 25951511
Change-Id: I392eed4a0e0db5a940bc8a97ef56c26a7397b0f9
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit d3d07c92ff69f784bb8c3279fa87678bfa2f7f6f)
Curretly, zsmalloc regards a zspage as ZS_ALMOST_EMPTY if the zspage has
under 1/4 used objects(ie, fullness_threshold_frac). It could make result
in loose packing since zsmalloc migrates only ZS_ALMOST_EMPTY zspage out.
This patch changes the rule so that zsmalloc makes zspage which has above
3/4 used object ZS_ALMOST_FULL so it could make tight packing.
Bug: 25951511
Change-Id: I9283cd6e8ce9916ea7213b724946664e2a6f32cb
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit 312fcae227037619dc858c9ccd362c7b847730a2)
This patch provides core functions for migration of zsmalloc. Migraion
policy is simple as follows.
for each size class {
while {
src_page = get zs_page from ZS_ALMOST_EMPTY
if (!src_page)
break;
dst_page = get zs_page from ZS_ALMOST_FULL
if (!dst_page)
dst_page = get zs_page from ZS_ALMOST_EMPTY
if (!dst_page)
break;
migrate(from src_page, to dst_page);
}
}
For migration, we need to identify which objects in zspage are allocated
to migrate them out. We could know it by iterating of freed objects in a
zspage because first_page of zspage keeps free objects singly-linked list
but it's not efficient. Instead, this patch adds a tag(ie,
OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check
whether the object is allocated easily.
This patch adds another status bit in handle to synchronize between user
access through zs_map_object and migration. During migration, we cannot
move objects user are using due to data coherency between old object and
new object.
Bug: 25951511
Change-Id: Ideb5295570cc1f6c4fcb18a8f8609c63a38c86e4
[akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit c78062612fb525430b775a0bef4d3cc07e512da0)
In later patch, migration needs some part of functions in zs_malloc and
zs_free so this patch factor out them.
Bug: 25951511
Change-Id: I6079cbc1d3d107bc39f9dbb3412d9eb9039875ad
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit 2e40e163a25af3bd35d128d3e2e005916de5cce6)
Recently, we started to use zram heavily and some of issues
popped.
1) external fragmentation
I got a report from Juneho Choi that fork failed although there are plenty
of free pages in the system. His investigation revealed zram is one of
the culprit to make heavy fragmentation so there was no more contiguous
16K page for pgd to fork in the ARM.
2) non-movable pages
Other problem of zram now is that inherently, user want to use zram as
swap in small memory system so they use zRAM with CMA to use memory
efficiently. However, unfortunately, it doesn't work well because zRAM
cannot use CMA's movable pages unless it doesn't support compaction. I
got several reports about that OOM happened with zram although there are
lots of swap space and free space in CMA area.
3) internal fragmentation
zRAM has started support memory limitation feature to limit memory usage
and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be
harmonized with zram-swap to stop anonymous page reclaim if zram consumed
memory up to the limit although there are free space on the swap. One
problem for that direction is zram has no way to know any hole in memory
space zsmalloc allocated by internal fragmentation so zram would regard
swap is full although there are free space in zsmalloc. For solving the
issue, zram want to trigger compaction of zsmalloc before it decides full
or not.
This patchset is first step to support above issues. For that, it adds
indirect layer between handle and object location and supports manual
compaction to solve 3th problem first of all.
After this patchset got merged, next step is to make VM aware of zsmalloc
compaction so that generic compaction will move zsmalloced-pages
automatically in runtime.
In my imaginary experiment(ie, high compress ratio data with heavy swap
in/out on 8G zram-swap), data is as follows,
Before =
zram allocated object : 60212066 bytes
zram total used: 140103680 bytes
ratio: 42.98 percent
MemFree: 840192 kB
Compaction
After =
frag ratio after compaction
zram allocated object : 60212066 bytes
zram total used: 76185600 bytes
ratio: 79.03 percent
MemFree: 901932 kB
Juneho reported below in his real platform with small aging.
So, I think the benefit would be bigger in real aging system
for a long time.
- frag_ratio increased 3% (ie, higher is better)
- memfree increased about 6MB
- In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased
frag ratio after swap fragment
used : 156677 kbytes
total: 166092 kbytes
frag_ratio : 94
meminfo before compaction
MemFree: 83724 kB
Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0
Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0
num_migrated : 23630
compaction done
frag ratio after compaction
used : 156673 kbytes
total: 160564 kbytes
frag_ratio : 97
meminfo after compaction
MemFree: 89060 kB
Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0
Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0
This patchset adds more logics(about 480 lines) in zsmalloc but when I
tested heavy swapin/out program, the regression for swapin/out speed is
marginal because most of overheads were caused by compress/decompress and
other MM reclaim stuff.
This patch (of 7):
Currently, handle of zsmalloc encodes object's location directly so it
makes support of migration hard.
This patch decouples handle and object via adding indirect layer. For
that, it allocates handle dynamically and returns it to user. The handle
is the address allocated by slab allocation so it's unique and we could
keep object's location in the memory space allocated for handle.
With it, we can change object's position without changing handle itself.
Bug: 25951511
Change-Id: Id50a98341f63c4e1bb39589ca992661486469dca
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Gunho Lee <gunho.lee@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit 3eba0c6a56c04f2b017b43641a821f1ebfb7fb4c)
Currently the underlay of zpool: zsmalloc/zbud, do not know who creates
them. There is not a method to let zsmalloc/zbud find which caller they
belong to.
Now we want to add statistics collection in zsmalloc. We need to name the
debugfs dir for each pool created. The way suggested by Minchan Kim is to
use a name passed by caller(such as zram) to create the zsmalloc pool.
/sys/kernel/debug/zsmalloc/zram0
This patch adds an argument `name' to zs_create_pool() and other related
functions.
Bug: 25951511
Change-Id: Ib71e8e63c71e808795073bd08c0aab14b43b4c35
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Conflicts:
drivers/block/zram/zram_drv.c
(cherry-pick from commit 66cdef663cd7a97aff6bbbf41a81a0205dc81ba2)
Currently functions in zsmalloc.c does not arranged in a readable and
reasonable sequence. With the more and more functions added, we may
meet below inconvenience. For example:
Current functions:
void zs_init()
{
}
static void get_maxobj_per_zspage()
{
}
Then I want to add a func_1() which is called from zs_init(), and this
new added function func_1() will used get_maxobj_per_zspage() which is
defined below zs_init().
void func_1()
{
get_maxobj_per_zspage()
}
void zs_init()
{
func_1()
}
static void get_maxobj_per_zspage()
{
}
This will cause compiling issue. So we must add a declaration:
static void get_maxobj_per_zspage();
before func_1() if we do not put get_maxobj_per_zspage() before
func_1().
In addition, puting module_[init|exit] functions at the bottom of the
file conforms to our habit.
So, this patch ajusts function sequence as:
/* helper functions */
...
obj_location_to_handle()
...
/* Some exported functions */
...
zs_map_object()
zs_unmap_object()
zs_malloc()
zs_free()
zs_init()
zs_exit()
Bug: 25951511
Change-Id: I68377a213ade041b34e99a4280ebd57a933dfa83
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit df8b5bb998f10cfc040ad30300f9a9ea4592ff82)
In zs_create_pool(), prev_class is assigned (ZS_SIZE_CLASSES - 1) times.
And the prev_class only references to the previous size_class. So we do
not need unnecessary assignement.
This patch assigns *prev_class* when a new size_class structure is
allocated and uses prev_class to check whether the first class has been
allocated.
Bug: 25951511
Change-Id: Ie5e4be867976af0e9ce786a58d1ee0147b7fb0ad
[akpm@linux-foundation.org: remove now-unused ZS_SIZE_CLASSES]
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit 40f9fb8cffc6a20ae269e3b43dfba7a4f65d7f50)
I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim
found zsmalloc even does not support allocating an obj with the size of
ZS_MAX_ALLOC_SIZE in some situations.
For example:
In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then:
ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by:
MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS))
ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE)
ZS_SIZE_CLASS_DELTA is 256 bytes
So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) /
ZS_SIZE_CLASS_DELTA + 1
= 256
In zs_create_pool(), the max size obj which can be allocated will be:
ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312
We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT
allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper
users we can do.
[1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html
[2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html
This patch fixes this issue by dynamiclly calculating zs_size_classes when
module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the
max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it.
Bug: 25951511
Change-Id: Ia35e3456e94ebaf14c65a13dde8b471ebe1095ab
[akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability]
Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit af4ee5e977acb150371c28bd85cb7e34cac48b13)
The kunmap_atomic should use virtual address getting by kmap_atomic.
However, some pieces of code in zsmalloc uses modified address, not the
one got by kmap_atomic for kunmap_atomic.
It's okay for working because zsmalloc modifies the address inner
PAGE_SIZE bounday so it works with current kmap_atomic's implementation.
But it's still fragile with potential changing of kmap_atomic so let's
correct it.
I got a subtle bug when I implemented a new feature of zsmalloc
(compaction) due to a link's mishandling (the link was over page
boundary). Although it was totally my mistake, it took a while to find
the cause because an unpredictable kmapped address was unmapped causing an
almost random crash.
Bug: 25951511
Change-Id: I9337684d102af93ec600077bf4c9658a942c8d09
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit b1b00a5b8a6cf32e3973507decf1216709b55072)
Mahendran Ganesh reported that zpool-enabled zsmalloc should not call
zpool_unregister_driver() from zs_init() if cpu notifier registration has
failed, because error handling is performed before we register the driver
via zpool_register_driver() call.
Factor out cpu notifier registration and unregistration code and fix
zs_init() error handling.
Bug: 25951511
Change-Id: I9311d16de84accd9c5d3f2a333b30fe189a37222
link: http://lkml.iu.edu//hypermail/linux/kernel/1411.1/04156.html
[akpm@linux-foundation.org: squash bogus gcc warning]
[akpm@linux-foundation.org: use __init and __exit]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit 9eec4cd53f9865b733dc78cf5f6465871beed014)
zsmalloc has many size_classes to reduce fragmentation and they are in 16
bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096. And,
zsmalloc has constraint that each zspage has 4 pages at maximum.
In this situation, we can see interesting aspect. Let's think about
size_class for 1488, 1472, ..., 1376. To prevent external fragmentation,
they uses 4 pages per zspage and so all they can contain 11 objects at
maximum.
16384 (4096 * 4) = 1488 * 11 + remains
16384 (4096 * 4) = 1472 * 11 + remains
16384 (4096 * 4) = ...
16384 (4096 * 4) = 1376 * 11 + remains
It means that they have same characteristics and classification between
them isn't needed. If we use one size_class for them, we can reduce
fragementation and save some memory since both the 1488 and 1472 sized
classes can only fit 11 objects into 4 pages, and an object that's 1472
bytes can fit into an object that's 1488 bytes, merging these classes to
always use objects that are 1488 bytes will reduce the total number of
size classes. And reducing the total number of size classes reduces
overall fragmentation, because a wider range of compressed pages can fit
into a single size class, leaving less unused objects in each size class.
For this purpose, this patch implement size_class merging. If there is
size_class that have same pages_per_zspage and same number of objects per
zspage with previous size_class, we don't create new size_class. Instead,
we use previous, same characteristic size_class. With this way, above
example sizes (1488, 1472, ..., 1376) use just one size_class so we can
get much more memory utilization.
Below is result of my simple test.
TEST ENV: EXT4 on zram, mount with discard option WORKLOAD: untar kernel
source code, remove directory in descending order in size. (drivers arch
fs sound include net Documentation firmware kernel tools)
Each line represents orig_data_size, compr_data_size, mem_used_total,
fragmentation overhead (mem_used - compr_data_size) and overhead ratio
(overhead to compr_data_size), respectively, after untar and remove
operation is executed.
* untar-nomerge.out
orig_size compr_size used_size overhead overhead_ratio
525.88MB 199.16MB 210.23MB 11.08MB 5.56%
288.32MB 97.43MB 105.63MB 8.20MB 8.41%
177.32MB 61.12MB 69.40MB 8.28MB 13.55%
146.47MB 47.32MB 56.10MB 8.78MB 18.55%
124.16MB 38.85MB 48.41MB 9.55MB 24.58%
103.93MB 31.68MB 40.93MB 9.25MB 29.21%
84.34MB 22.86MB 32.72MB 9.86MB 43.13%
66.87MB 14.83MB 23.83MB 9.00MB 60.70%
60.67MB 11.11MB 18.60MB 7.49MB 67.48%
55.86MB 8.83MB 16.61MB 7.77MB 88.03%
53.32MB 8.01MB 15.32MB 7.31MB 91.24%
* untar-merge.out
orig_size compr_size used_size overhead overhead_ratio
526.23MB 199.18MB 209.81MB 10.64MB 5.34%
288.68MB 97.45MB 104.08MB 6.63MB 6.80%
177.68MB 61.14MB 66.93MB 5.79MB 9.47%
146.83MB 47.34MB 52.79MB 5.45MB 11.51%
124.52MB 38.87MB 44.30MB 5.43MB 13.96%
104.29MB 31.70MB 36.83MB 5.13MB 16.19%
84.70MB 22.88MB 27.92MB 5.04MB 22.04%
67.11MB 14.83MB 19.26MB 4.43MB 29.86%
60.82MB 11.10MB 14.90MB 3.79MB 34.17%
55.90MB 8.82MB 12.61MB 3.79MB 42.97%
53.32MB 8.01MB 11.73MB 3.73MB 46.53%
As you can see above result, merged one has better utilization (overhead
ratio, 5th column) and uses less memory (mem_used_total, 3rd column).
Bug: 25951511
Change-Id: I00825d2b8de666abb7a0d8b47348b89e8af80571
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: <juno.choi@lge.com>
Cc: "seungho1.park" <seungho1.park@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit 5538c562377580947916b3366898f1eb5f53768e)
Change zsmalloc init_zspage() logic to iterate through each object on each
of its pages, checking the offset to verify the object is on the current
page before linking it into the zspage.
The current zsmalloc init_zspage free object linking code has logic that
relies on there only being one page per zspage when PAGE_SIZE is a
multiple of class->size. It calculates the number of objects for the
current page, and iterates through all of them plus one, to account for
the assumed partial object at the end of the page. While this currently
works, the logic can be simplified to just link the object at each
successive offset until the offset is larger than PAGE_SIZE, which does
not rely on PAGE_SIZE being a multiple of class->size.
Bug: 25951511
Change-Id: I89e562a18b083f24f4697b4154d5b238becb36e6
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit 6dd9737e31504f9377a8a19810ea4922e88516c1)
The letter 'f' in "n <= N/f" stands for fullness_threshold_frac, not
1/fullness_threshold_frac.
Bug: 25951511
Change-Id: I3d3f090fab39fca1011999ea12e9aab187504e39
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit 722cdc17232f0f684011407f7cf3c40d39457971)
zs_get_total_size_bytes returns a amount of memory zsmalloc consumed with
*byte unit* but zsmalloc operates *page unit* rather than byte unit so
let's change the API so benefit we could get is that reduce unnecessary
overhead (ie, change page unit with byte unit) in zsmalloc.
Since return type is pages, "zs_get_total_pages" is better than
"zs_get_total_size_bytes".
Bug: 25951511
Change-Id: I2cbd9426483ae31c846923594e2cc3a8028e6cc2
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: <juno.choi@lge.com>
Cc: <seungho1.park@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: David Horner <ds2horner@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit 13de8933c96b4557f667c337676f05274e017f83)
Currently, zram has no feature to limit memory so theoretically zram can
deplete system memory. Users have asked for a limit several times as even
without exhaustion zram makes it hard to control memory usage of the
platform. This patchset adds the feature.
Patch 1 makes zs_get_total_size_bytes faster because it would be used
frequently in later patches for the new feature.
Patch 2 changes zs_get_total_size_bytes's return unit from bytes to page
so that zsmalloc doesn't need unnecessary operation(ie, << PAGE_SHIFT).
Patch 3 adds new feature. I added the feature into zram layer, not
zsmalloc because limiation is zram's requirement, not zsmalloc so any
other user using zsmalloc(ie, zpool) shouldn't affected by unnecessary
branch of zsmalloc. In future, if every users of zsmalloc want the
feature, then, we could move the feature from client side to zsmalloc
easily but vice versa would be painful.
Patch 4 adds news facility to report maximum memory usage of zram so that
this avoids user polling frequently via /sys/block/zram0/ mem_used_total
and ensures transient max are not missed.
This patch (of 4):
pages_allocated has counted in size_class structure and when user of
zsmalloc want to see total_size_bytes, it should gather all of count from
each size_class to report the sum.
It's not bad if user don't see the value often but if user start to see
the value frequently, it would be not a good deal for performance pov.
This patch moves the count from size_class to zs_pool so it could reduce
memory footprint (from [255 * 8byte] to [sizeof(atomic_long_t)]).
Bug: 25951511
Change-Id: I05526575b81c95a12a7f8f0ef05040ed18b5fa6f
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: <juno.choi@lge.com>
Cc: <seungho1.park@lge.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Reviewed-by: David Horner <ds2horner@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit 137f8cff505ace6251dc442c7aa973d60c801a79)
To avoid potential format string expansion via module parameters, do not
use the zpool type directly in request_module() without a format string.
Additionally, to avoid arbitrary modules being loaded via zpool API
(e.g. via the zswap_zpool_type module parameter) add a "zpool-" prefix
to the requested module, as well as module aliases for the existing
zpool types (zbud and zsmalloc).
Bug: 25951511
Change-Id: Id04e543f6e12e73e72bf79bdde4b1b13c35d7cae
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit af8d417a04564bca0348e7e3c749ab12a3e837ad)
Add zpool api.
zpool provides an interface for memory storage, typically of compressed
memory. Users can select what backend to use; currently the only
implementations are zbud, a low density implementation with up to two
compressed pages per storage page, and zsmalloc, a higher density
implementation with multiple compressed pages per storage page.
Bug: 25951511
Change-Id: I25da4c5454ad97c35e7f666df936d4c199f656a4
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Tested-by: Seth Jennings <sjennings@variantweb.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Weijie Yang <weijie.yang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Conflicts:
mm/Kconfig
mm/Makefile
(cherry-pick from commit 7eb52512a977854eca51d9b692c2f3be8a0e5eeb)
According to calculation, ZS_SIZE_CLASSES value is 255 on systems with 4K
page size, not 254. The old value may forget count the ZS_MIN_ALLOC_SIZE
in.
This patch fixes this trivial issue in the comments.
Bug: 25951511
Change-Id: I7f3039f14a6813bc2e97972b6968ac09d87202ed
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit 2216ee853017f9c9371106c5c02d4fe42f61cbfa)
The help text for CONFIG_PGTABLE_MAPPING has an incorrect URL. While
we're at it, remove the unnecessary footnote notation.
Bug: 25951511
Change-Id: Ia2eb06b2a5d29960b51f0b6558ef5041fd9c03fa
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry-pick from commit c3e3e88adccb3119b69484c56798ec616307a94f)
This patch adds lots of comments and it will help others
to review and enhance.
Bug: 25951511
Change-Id: I2c1edf24e917c2d51ef68a9987d81f9b6a4a2bd2
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry-pick from commit 1b945aeef0b9cb5e98d682c310272b08198e54b5)
Zsmalloc has two methods 1) copy-based and 2) pte based to
access objects that span two pages.
You can see history why we supported two approach from [1].
But it was bad choice that adding hard coding to select arch
which want to use pte based method because there are lots of
SoC in an architecure and they can have different cache size,
CPU speed and so on so it would be better to expose it to user
as selectable Kconfig option like Andrew Morton suggested.
[1] https://lkml.org/lkml/2012/7/11/58
Bug: 25951511
Change-Id: Ic6855e8fefc7a0f36db896e8b03869c143e982d6
Acked-by: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry pick from commit f0e71fcd0fa6f3f5495cd9ad3f1e4acd94446a55)
Subsystems that want to register CPU hotplug callbacks, as well as perform
initialization for the CPUs that are already online, often do it as shown
below:
get_online_cpus();
for_each_online_cpu(cpu)
init_cpu(cpu);
register_cpu_notifier(&foobar_cpu_notifier);
put_online_cpus();
This is wrong, since it is prone to ABBA deadlocks involving the
cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently
with CPU hotplug operations).
Instead, the correct and race-free way of performing the callback
registration is:
cpu_notifier_register_begin();
for_each_online_cpu(cpu)
init_cpu(cpu);
/* Note the use of the double underscored version of the API */
__register_cpu_notifier(&foobar_cpu_notifier);
cpu_notifier_register_done();
Fix the zsmalloc code by using this latter form of callback registration.
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bug: 24810447
Change-Id: Idda192da0c2d7cb3ca581ba2916fe9b4befe312e
(cherry pick from commit 31fc00bb788ffde7d8d861d8b2bba798ab445992)
Add my copyright to the zsmalloc source code which I maintain.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 24810447
Change-Id: Ic4137129666be7a6a383ed8b9c929ee97b6cc9fc
(cherry pick from bcf1647d0899666f0fb90d176abf63bae22abb7c)
This patch moves zsmalloc under mm directory.
Before that, description will explain why we have needed custom
allocator.
Zsmalloc is a new slab-based memory allocator for storing compressed
pages. It is designed for low fragmentation and high allocation success
rate on large object, but <= PAGE_SIZE allocations.
zsmalloc differs from the kernel slab allocator in two primary ways to
achieve these design goals.
zsmalloc never requires high order page allocations to back slabs, or
"size classes" in zsmalloc terms. Instead it allows multiple
single-order pages to be stitched together into a "zspage" which backs
the slab. This allows for higher allocation success rate under memory
pressure.
Also, zsmalloc allows objects to span page boundaries within the zspage.
This allows for lower fragmentation than could be had with the kernel
slab allocator for objects between PAGE_SIZE/2 and PAGE_SIZE. With the
kernel slab allocator, if a page compresses to 60% of it original size,
the memory savings gained through compression is lost in fragmentation
because another object of the same size can't be stored in the leftover
space.
This ability to span pages results in zsmalloc allocations not being
directly addressable by the user. The user is given an
non-dereferencable handle in response to an allocation request. That
handle must be mapped, using zs_map_object(), which returns a pointer to
the mapped region that can be used. The mapping is necessary since the
object data may reside in two different noncontigious pages.
The zsmalloc fulfills the allocation needs for zram perfectly
[sjenning@linux.vnet.ibm.com: borrow Seth's quote]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 24810447
Change-Id: I7b7923baeb9989e002523c66696e4a98fb357c46
Conflicts:
mm/Kconfig
mm/Makefile
This patch includes two trace events on generic_perform_write and
do_generic_file_read to check on the address_space mapping for the
pages to be accessed by the request.
Change-Id: Ib319b9b2c971b9e5c76645be6cfd995ef9465d77
Signed-off-by: Daniel Campello <campello@google.com>
Conflicts:
include/linux/pagemap.h
Fixes compile time failures because of not protecting
CMA related elements with CONFIG_CMA.
Change-Id: I930b7c0ffdce0f1bfc4f8a582a698be16ed44d1f
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
The test_bit operations in get/set pageblock flags are expensive. This
patch reads the bitmap on a word basis and use shifts and masks to isolate
the bits of interest. Similarly masks are used to set a local copy of the
bitmap and then use cmpxchg to update the bitmap if there have been no
other changes made in parallel.
In a test running dd onto tmpfs the overhead of the pageblock-related
functions went from 1.27% in profiles to 0.5%.
In addition to the performance benefits, this patch closes races that are
possible between:
a) get_ and set_pageblock_migratetype(), where get_pageblock_migratetype()
reads part of the bits before and other part of the bits after
set_pageblock_migratetype() has updated them.
b) set_pageblock_migratetype() and set_pageblock_skip(), where the non-atomic
read-modify-update set bit operation in set_pageblock_skip() will cause
lost updates to some bits changed in the set_pageblock_migratetype().
Joonsoo Kim first reported the case a) via code inspection. Vlastimil
Babka's testing with a debug patch showed that either a) or b) occurs
roughly once per mmtests' stress-highalloc benchmark (although not
necessarily in the same pageblock). Furthermore during development of
unrelated compaction patches, it was observed that frequent calls to
{start,undo}_isolate_page_range() the race occurs several thousands of
times and has resulted in NULL pointer dereferences in move_freepages()
and free_one_page() in places where free_list[migratetype] is
manipulated by e.g. list_move(). Further debugging confirmed that
migratetype had invalid value of 6, causing out of bounds access to the
free_list array.
That confirmed that the race exist, although it may be extremely rare,
and currently only fatal where page isolation is performed due to
memory hot remove. Races on pageblocks being updated by
set_pageblock_migratetype(), where both old and new migratetype are
lower MIGRATE_RESERVE, currently cannot result in an invalid value
being observed, although theoretically they may still lead to
unexpected creation or destruction of MIGRATE_RESERVE pageblocks.
Furthermore, things could get suddenly worse when memory isolation is
used more, or when new migratetypes are added.
After this patch, the race has no longer been observed in testing.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: Ibbcf2ba494831b5f29039ef82be629cb5eacb906
Git-commit: e58469bafd0524e848c3733bc3918d854595e20f
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[vinmenon@codeaurora.org: resolve trivial merge conflicts]
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=8AB3
-----END PGP SIGNATURE-----
Merge upstream tag 'v3.10.84' into LA.BR.1.3.3
This merge brings us up-to-date as of upstream tag v3.10.84
* tag 'v3.10.84' (317 commits):
Linux 3.10.84
fs: Fix S_NOSEC handling
KVM: x86: make vapics_in_nmi_mode atomic
MIPS: Fix KVM guest fixmap address
x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A
powerpc/perf: Fix book3s kernel to userspace backtraces
arm: KVM: force execution of HCPTR access on VM exit
Revert "crypto: talitos - convert to use be16_add_cpu()"
crypto: talitos - avoid memleak in talitos_alg_alloc()
sctp: Fix race between OOTB responce and route removal
packet: avoid out of bounds read in round robin fanout
packet: read num_members once in packet_rcv_fanout()
bridge: fix br_stp_set_bridge_priority race conditions
bridge: fix multicast router rlist endless loop
sparc: Use GFP_ATOMIC in ldc_alloc_exp_dring() as it can be called in softirq context
Linux 3.10.83
bus: mvebu: pass the coherency availability information at init time
KVM: nSVM: Check for NRIPS support before updating control field
ARM: clk-imx6q: refine sata's parent
d_walk() might skip too much
ipv6: update ip6_rt_last_gc every time GC is run
ipv6: prevent fib6_run_gc() contention
xfrm: Increase the garbage collector threshold
Btrfs: make xattr replace operations atomic
x86/microcode/intel: Guard against stack overflow in the loader
fs: take i_mutex during prepare_binprm for set[ug]id executables
hpsa: add missing pci_set_master in kdump path
hpsa: refine the pci enable/disable handling
sb_edac: Fix erroneous bytes->gigabytes conversion
ACPICA: Utilities: Cleanup to remove useless ACPI_PRINTF/FORMAT_xxx helpers.
ACPICA: Utilities: Cleanup to convert physical address printing formats.
__ptrace_may_access() should not deny sub-threads
include/linux/sched.h: don't use task->pid/tgid in same_thread_group/has_group_leader_pid
netfilter: Zero the tuple in nfnl_cthelper_parse_tuple()
netfilter: nfnetlink_cthelper: Remove 'const' and '&' to avoid warnings
config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected
get rid of s_files and files_lock
fput: turn "list_head delayed_fput_list" into llist_head
Linux 3.10.82
lpfc: Add iotag memory barrier
pipe: iovec: Fix memory corruption when retrying atomic copy as non-atomic
drm/mgag200: Reject non-character-cell-aligned mode widths
tracing: Have filter check for balanced ops
crypto: caam - fix RNG buffer cache alignment
Linux 3.10.81
btrfs: cleanup orphans while looking up default subvolume
btrfs: incorrect handling for fiemap_fill_next_extent return
cfg80211: wext: clear sinfo struct before calling driver
mm/memory_hotplug.c: set zone->wait_table to null after freeing it
drm/i915: Fix DDC probe for passive adapters
pata_octeon_cf: fix broken build
ozwpan: unchecked signed subtraction leads to DoS
ozwpan: divide-by-zero leading to panic
ozwpan: Use proper check to prevent heap overflow
MIPS: Fix enabling of DEBUG_STACKOVERFLOW
ring-buffer-benchmark: Fix the wrong sched_priority of producer
USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board
USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle
block: fix ext_dev_lock lockdep report
Input: elantech - fix detection of touchpads where the revision matches a known rate
ALSA: usb-audio: add MAYA44 USB+ mixer control names
ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion
ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420
iio: adis16400: Compute the scan mask from channel indices
iio: adis16400: Use != channel indices for the two voltage channels
iio: adis16400: Report pressure channel scale
xen: netback: read hotplug script once at start of day.
udp: fix behavior of wrong checksums
net_sched: invoke ->attach() after setting dev->qdisc
unix/caif: sk_socket can disappear when state is unlocked
net: dp83640: fix broken calibration routine.
bridge: fix parsing of MLDv2 reports
ipv4: Avoid crashing in ip_error
net: phy: Allow EEE for all RGMII variants
Linux 3.10.80
fs/binfmt_elf.c:load_elf_binary(): return -EINVAL on zero-length mappings
vfs: read file_handle only once in handle_to_path
ACPI / init: Fix the ordering of acpi_reserve_resources()
Input: elantech - fix semi-mt protocol for v3 HW
rtlwifi: rtl8192cu: Fix kernel deadlock
md/raid5: don't record new size if resize_stripes fails.
svcrpc: fix potential GSSX_ACCEPT_SEC_CONTEXT decoding failures
ARM: fix missing syscall trace exit
ARM: dts: imx27: only map 4 Kbyte for fec registers
crypto: s390/ghash - Fix incorrect ghash icv buffer handling.
rt2x00: add new rt2800usb device DWA 130
libata: Ignore spurious PHY event on LPM policy change
libata: Add helper to determine when PHY events should be ignored
ext4: check for zero length extent explicitly
ext4: convert write_begin methods to stable_page_writes semantics
mmc: atmel-mci: fix bad variable type for clkdiv
powerpc: Align TOC to 256 bytes
usb: gadget: configfs: Fix interfaces array NULL-termination
usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices
USB: cp210x: add ID for KCF Technologies PRN device
USB: pl2303: Remove support for Samsung I330
USB: visor: Match I330 phone more precisely
xhci: gracefully handle xhci_irq dead device
xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256
xhci: fix isoc endpoint dequeue from advancing too far on transaction error
target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST
ASoC: wm8994: correct BCLK DIV 348 to 384
ASoC: wm8960: fix "RINPUT3" audio route error
ASoC: mc13783: Fix wrong mask value used in mc13xxx_reg_rmw() calls
ALSA: hda - Add headphone quirk for Lifebook E752
ALSA: hda - Add Conexant codecs CX20721, CX20722, CX20723 and CX20724
d_walk() might skip too much
lib: Fix strnlen_user() to not touch memory after specified maximum
hwmon: (ntc_thermistor) Ensure iio channel is of type IIO_VOLTAGE
libceph: request a new osdmap if lingering request maps to no osd
lguest: fix out-by-one error in address checking.
fs, omfs: add NULL terminator in the end up the token list
KVM: MMU: fix CR4.SMEP=1, CR0.WP=0 with shadow pages
net: socket: Fix the wrong returns for recvmsg and sendmsg
kernel: use the gnu89 standard explicitly
staging, rtl8192e, LLVMLinux: Remove unused inline prototype
staging: rtl8712, rtl8712: avoid lots of build warnings
staging, rtl8192e, LLVMLinux: Change extern inline to static inline
drm/i915: Fix declaration of intel_gmbus_{is_forced_bit/is_port_falid}
staging: wlags49_h2: fix extern inline functions
Linux 3.10.79
ACPICA: Utilities: Cleanup to enforce ACPI_PHYSADDR_TO_PTR()/ACPI_PTR_TO_PHYSADDR().
ACPICA: Tables: Change acpi_find_root_pointer() to use acpi_physical_address.
revert "softirq: Add support for triggering softirq work on softirqs"
sound/oss: fix deadlock in sequencer_ioctl(SNDCTL_SEQ_OUTOFBAND)
mmc: card: Don't access RPMB partitions for normal read/write
pinctrl: Don't just pretend to protect pinctrl_maps, do it for real
drm/i915: Add missing MacBook Pro models with dual channel LVDS
ARM: mvebu: armada-xp-openblocks-ax3-4: Disable internal RTC
ARM: dts: imx23-olinuxino: Fix dr_mode of usb0
ARM: dts: imx28: Fix AUART4 TX-DMA interrupt name
ARM: dts: imx25: Add #pwm-cells to pwm4
gpio: sysfs: fix memory leaks and device hotplug
gpio: unregister gpiochip device before removing it
xen/console: Update console event channel on resume
mm/memory-failure: call shake_page() when error hits thp tail page
nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()
ocfs2: dlm: fix race between purge and get lock resource
Linux 3.10.78
ARC: signal handling robustify
UBI: fix soft lockup in ubi_check_volume()
Drivers: hv: vmbus: Don't wait after requesting offers
ARM: dts: dove: Fix uart[23] reg property
staging: panel: fix lcd type
usb: gadget: printer: enqueue printer's response for setup request
usb: host: oxu210hp: use new USB_RESUME_TIMEOUT
3w-sas: fix command completion race
3w-9xxx: fix command completion race
3w-xxxx: fix command completion race
ext4: fix data corruption caused by unwritten and delayed extents
rbd: end I/O the entire obj_request on error
serial: of-serial: Remove device_type = "serial" registration
ALSA: hda - Fix mute-LED fixed mode
ALSA: emu10k1: Emu10k2 32 bit DMA mode
ALSA: emu10k1: Fix card shortname string buffer overflow
ALSA: emux: Fix mutex deadlock in OSS emulation
ALSA: emux: Fix mutex deadlock at unloading
ipv4: Missing sk_nulls_node_init() in ping_unhash().
Linux 3.10.77
s390: Fix build error
nosave: consolidate __nosave_{begin,end} in <asm/sections.h>
memstick: mspro_block: add missing curly braces
C6x: time: Ensure consistency in __init
wl18xx: show rx_frames_per_rates as an array as it really is
lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR
e1000: add dummy allocator to fix race condition between mtu change and netpoll
ksoftirqd: Enable IRQs and call cond_resched() before poking RCU
RCU pathwalk breakage when running into a symlink overmounting something
drm/i915: cope with large i2c transfers
drm/radeon: fix doublescan modes (v2)
i2c: core: Export bus recovery functions
IB/mlx4: Fix WQE LSO segment calculation
IB/core: don't disallow registering region starting at 0x0
IB/core: disallow registering 0-sized memory region
stk1160: Make sure current buffer is released
mvsas: fix panic on expander attached SATA devices
Drivers: hv: vmbus: Fix a bug in the error path in vmbus_open()
xtensa: provide __NR_sync_file_range2 instead of __NR_sync_file_range
xtensa: xtfpga: fix hardware lockup caused by LCD driver
ACPICA: Utilities: split IO address types from data type models.
drivers: parport: Kconfig: exclude arm64 for PARPORT_PC
scsi: storvsc: Fix a bug in copy_from_bounce_buffer()
UBI: fix check for "too many bytes"
UBI: initialize LEB number variable
UBI: fix out of bounds write
UBI: account for bitflips in both the VID header and data
tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile
powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH
ext4: make fsync to sync parent dir in no-journal for real this time
arm64: kernel: compiling issue, need delete read_current_timer()
video: vgacon: Don't build on arm64
console: Disable VGA text console support on cris
drivers: parport: Kconfig: exclude h8300 for PARPORT_PC
parport: disable PC-style parallel port support on cris
rtlwifi: rtl8192cu: Add new device ID
rtlwifi: rtl8192cu: Add new USB ID
ptrace: fix race between ptrace_resume() and wait_task_stopped()
fs/binfmt_elf.c: fix bug in loading of PIE binaries
Input: elantech - fix absolute mode setting on some ASUS laptops
ALSA: emu10k1: don't deadlock in proc-functions
usb: core: hub: use new USB_RESUME_TIMEOUT
usb: host: sl811: use new USB_RESUME_TIMEOUT
usb: host: xhci: use new USB_RESUME_TIMEOUT
usb: host: isp116x: use new USB_RESUME_TIMEOUT
usb: host: r8a66597: use new USB_RESUME_TIMEOUT
usb: define a generic USB_RESUME_TIMEOUT macro
usb: phy: Find the right match in devm_usb_phy_match
ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on Cragganmore
ARM: 8320/1: fix integer overflow in ELF_ET_DYN_BASE
power_supply: lp8788-charger: Fix leaked power supply on probe fail
ring-buffer: Replace this_cpu_*() with __this_cpu_*()
spi: spidev: fix possible arithmetic overflow for multi-transfer message
cdc-wdm: fix endianness bug in debug statements
MIPS: Hibernate: flush TLB entries earlier
KVM: use slowpath for cross page cached accesses
s390/hibernate: fix save and restore of kernel text section
KVM: s390: Zero out current VMDB of STSI before including level3 data.
usb: gadget: composite: enable BESL support
Btrfs: fix inode eviction infinite loop after cloning into it
Btrfs: fix log tree corruption when fs mounted with -o discard
tcp: avoid looping in tcp_send_fin()
tcp: fix possible deadlock in tcp_send_fin()
ip_forward: Drop frames with attached skb->sk
Linux 3.10.76
dcache: Fix locking bugs in backported "deal with deadlock in d_walk()"
arc: mm: Fix build failure
sb_edac: avoid INTERNAL ERROR message in EDAC with unspecified channel
x86: mm: move mmap_sem unlock from mm_fault_error() to caller
vm: make stack guard page errors return VM_FAULT_SIGSEGV rather than SIGBUS
vm: add VM_FAULT_SIGSEGV handling support
deal with deadlock in d_walk()
move d_rcu from overlapping d_child to overlapping d_alias
kconfig: Fix warning "‘jump’ may be used uninitialized"
KVM: x86: SYSENTER emulation is broken
netfilter: conntrack: disable generic tracking for known protocols
Bluetooth: Ignore isochronous endpoints for Intel USB bootloader
Bluetooth: Add support for Intel bootloader devices
Bluetooth: btusb: Add IMC Networks (Broadcom based)
Bluetooth: Add firmware update for Atheros 0cf3:311f
Bluetooth: Enable Atheros 0cf3:311e for firmware upload
mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support
splice: Apply generic position and size checks to each write
jfs: fix readdir regression
serial: 8250_dw: Fix deadlock in LCR workaround
benet: Call dev_kfree_skby_any instead of kfree_skb.
ixgb: Call dev_kfree_skby_any instead of dev_kfree_skb.
tg3: Call dev_kfree_skby_any instead of dev_kfree_skb.
bnx2: Call dev_kfree_skby_any instead of dev_kfree_skb.
r8169: Call dev_kfree_skby_any instead of dev_kfree_skb.
8139too: Call dev_kfree_skby_any instead of dev_kfree_skb.
8139cp: Call dev_kfree_skby_any instead of kfree_skb.
tcp: tcp_make_synack() should clear skb->tstamp
tcp: fix FRTO undo on cumulative ACK of SACKed range
ipv6: Don't reduce hop limit for an interface
tcp: prevent fetching dst twice in early demux code
remove extra definitions of U32_MAX
conditionally define U32_MAX
Linux 3.10.75
pagemap: do not leak physical addresses to non-privileged userspace
console: Fix console name size mismatch
IB/mlx4: Saturate RoCE port PMA counters in case of overflow
kernel.h: define u8, s8, u32, etc. limits
net: llc: use correct size for sysctl timeout entries
net: rds: use correct size for max unacked packets and bytes
ipc: fix compat msgrcv with negative msgtyp
core, nfqueue, openvswitch: fix compilation warning
media: s5p-mfc: fix mmap support for 64bit arch
iscsi target: fix oops when adding reject pdu
ocfs2: _really_ sync the right range
be2iscsi: Fix kernel panic when device initialization fails
cifs: fix use-after-free bug in find_writable_file
usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
cpuidle: ACPI: do not overwrite name and description of C0
dmaengine: omap-dma: Fix memory leak when terminating running transfer
iio: imu: Use iio_trigger_get for indio_dev->trig assignment
iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
Defer processing of REQ_PREEMPT requests for blocked devices
USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
USB: ftdi_sio: Added custom PID for Synapse Wireless product
radeon: Do not directly dereference pointers to BIOS area.
writeback: fix possible underflow in write bandwidth calculation
writeback: add missing INITIAL_JIFFIES init in global_update_bandwidth()
mm/memory hotplug: postpone the reset of obsolete pgdat
nbd: fix possible memory leak
iwlwifi: dvm: run INIT firmware again upon .start()
IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic
IB/core: Avoid leakage from kernel to user space
tcp: Fix crash in TCP Fast Open
selinux: fix sel_write_enforce broken return value
ALSA: hda - Fix headphone pin config for Lifebook T731
ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support
ALSA: hda - Add one more node in the EAPD supporting candidate list
Linux 3.10.74
net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}
powerpc/mpc85xx: Add ranges to etsec2 nodes
hfsplus: fix B-tree corruption after insertion at position 0
dm: hold suspend_lock while suspending device during device deletion
vt6655: RFbSetPower fix missing rate RATE_12M
perf: Fix irq_work 'tail' recursion
Revert "iwlwifi: mvm: fix failure path when power_update fails in add_interface"
mac80211: drop unencrypted frames in mesh fwding
mac80211: disable u-APSD queues by default
nl80211: ignore HT/VHT capabilities without QoS/WMM
tcm_qla2xxx: Fix incorrect use of __transport_register_session
tcm_fc: missing curly braces in ft_invl_hw_context()
ASoC: wm8955: Fix wrong value references for boolean kctl
ASoC: adav80x: Fix wrong value references for boolean kctl
ASoC: ak4641: Fix wrong value references for boolean kctl
ASoC: wm8904: Fix wrong value references for boolean kctl
ASoC: wm8903: Fix wrong value references for boolean kctl
ASoC: wm2000: Fix wrong value references for boolean kctl
ASoC: wm8731: Fix wrong value references for boolean kctl
ASoC: tas5086: Fix wrong value references for boolean kctl
ASoC: wm8960: Fix wrong value references for boolean kctl
ASoC: cs4271: Fix wrong value references for boolean kctl
ASoC: sgtl5000: remove useless register write clearing CHRGPUMP_POWERUP
Change-Id: Ib7976ee2c7224e39074157e28db4158db40b00db
Signed-off-by: Kaushal Kumar <kaushalk@codeaurora.org>
A userspace call to mmap(MAP_LOCKED) may result in the successful locking
of memory while also producing a confusing audit log denial. can_do_mlock
checks capable and rlimit. If either of these return positive
can_do_mlock returns true. The capable check leads to an LSM hook used by
apparmour and selinux which produce the audit denial. Reordering so
rlimit is checked first eliminates the denial on success, only recording a
denial when the lock is unsuccessful as a result of the denial.
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Nick Kralevich <nnk@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Paul Cassella <cassella@cray.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Git-commit: e48e8c45925185c02b23ae461671be29c91101d5
Git-repo: https://android.googlesource.com/kernel/common.git
Signed-off-by: Kaushal Kumar <kaushalk@codeaurora.org>
In the second half of scan_swap_map()'s scan loop, offset is set to
si->lowest_bit and then incremented before entering the loop for the
first time, causing si->swap_map[si->lowest_bit] to be skipped.
Signed-off-by: Jamie Liu <jamieliu@google.com>
Cc: Shaohua Li <shli@fusionio.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Git-commit: a5998061daab27802c418debe662be98a6e42874
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Change-Id: I84e0f0e012a7a9f74d8a7bf73d7d869742b01cc5
reclaim_clean_pages_from_list() assumes that shrink_page_list() returns
number of pages removed from the candidate list. But shrink_page_list()
puts back mlocked pages without passing it to caller and without counting
as nr_reclaimed. This increases nr_isolated.
To fix this, this patch changes shrink_page_list() to pass unevictable
pages back to caller. Caller will take care those pages.
Minchan said:
It fixes two issues.
1. With unevictable page, cma_alloc will be successful.
Exactly speaking, cma_alloc of current kernel will fail due to
unevictable pages.
2. fix leaking of NR_ISOLATED counter of vmstat
With it, too_many_isolated works. Otherwise, it could make hang until
the process get SIGKILL.
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Git-commit: 99e564148e202d817163a10af873a81bc33d532e
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
CRs-Fixed: 885312
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Change-Id: Icbd26a41d49ae33a43cbeac9d59d7be939192b5a
At present any vmpressure value is scaled up if the pages are
reclaimed through direct reclaim. This can result in false
vmpressure values. Consider a case where a device is booted up
and most of the memory is occuppied by file pages. kswapd will
make sure that high watermark is maintained. Now when a sudden
huge allocation request comes in, the system will definitely
have to get into direct reclaims. The vmpressures can be very low,
but because of allocstall accounting logic even these low values
will be scaled to values nearing 100. This can result in
unnecessary LMK kills for example. So define a tunable threshold
for vmpressure above which the allocstalls will be accounted.
CRs-fixed: 893699
Change-Id: Idd7c6724264ac89f1f68f2e9d70a32390ffca3e5
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
detected corruption
It's sometimes useful to know the physical address which
has beencorrupted, especially in systems with multiple
bus masters and DMA engines the capability of writing
to memory. It's may also be useful for identifying the
location of failures of memory cells in cases of
device-specific corruption.
Print the physical start address of the page to help
in these scenarios.
Change-Id: I081edd8b1c06913c0057a6cb9dda18077cfbdc30
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
This reverts commit f690884e16.
Re-enable this patch. Earlier, this was reverted as it exposed
several CMA bugs which are now fixed. So, time to re-enable
this patch.
Original commit text:
Add a cma pcp list in order to increase cma memory utilization.
Increased cma memory utilization will improve overall memory
utilization because free cma pages are ignored when memory reclaim
is done with gfp mask GFP_KERNEL.
Since most memory reclaim is done by kswapd, which uses a gfp mask
of GFP_KERNEL, by increasing cma memory utilization we are therefore
ensuring that less aggressive memory reclaim takes place.
Increased cma memory utilization will improve performance,
for example it will increase app concurrency.
Change-Id: Ia0f555427148b95068b3a7481e695ed02d58710d
Signed-off-by: Liam Mark <lmark@codeaurora.org>
commit 85bd839983778fcd0c1c043327b14a046e979b39 upstream.
Izumi found the following oops when hot re-adding a node:
BUG: unable to handle kernel paging request at ffffc90008963690
IP: __wake_up_bit+0x20/0x70
Oops: 0000 [#1] SMP
CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80
Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015
task: ffff880838df8000 ti: ffff880017b94000 task.ti: ffff880017b94000
RIP: 0010:[<ffffffff810dff80>] [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
RSP: 0018:ffff880017b97be8 EFLAGS: 00010246
RAX: ffffc90008963690 RBX: 00000000003c0000 RCX: 000000000000a4c9
RDX: 0000000000000000 RSI: ffffea101bffd500 RDI: ffffc90008963648
RBP: ffff880017b97c08 R08: 0000000002000020 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a0797c73800
R13: ffffea101bffd500 R14: 0000000000000001 R15: 00000000003c0000
FS: 00007fcc7ffff700(0000) GS:ffff880874800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc90008963690 CR3: 0000000836761000 CR4: 00000000001407e0
Call Trace:
unlock_page+0x6d/0x70
generic_write_end+0x53/0xb0
xfs_vm_write_end+0x29/0x80 [xfs]
generic_perform_write+0x10a/0x1e0
xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs]
xfs_file_write_iter+0x79/0x120 [xfs]
__vfs_write+0xd4/0x110
vfs_write+0xac/0x1c0
SyS_write+0x58/0xd0
system_call_fastpath+0x12/0x76
Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48
RIP [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
RSP <ffff880017b97be8>
CR2: ffffc90008963690
Reproduce method (re-add a node)::
Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic)
This seems an use-after-free problem, and the root cause is
zone->wait_table was not set to *NULL* after free it in
try_offline_node.
When hot re-add a node, we will reuse the pgdat of it, so does the zone
struct, and when add pages to the target zone, it will init the zone
first (including the wait_table) if the zone is not initialized. The
judgement of zone initialized is based on zone->wait_table:
static inline bool zone_is_initialized(struct zone *zone)
{
return !!zone->wait_table;
}
so if we do not set the zone->wait_table to *NULL* after free it, the
memory hotplug routine will skip the init of new zone when hot re-add
the node, and the wait_table still points to the freed memory, then we
will access the invalid address when trying to wake up the waiting
people after the i/o operation with the page is done, such as mentioned
above.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Reviewed by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kmemleak scanning thread can run for minutes. Callbacks like
kmemleak_free() are allowed during this time, the race being taken care of
by the object->lock spinlock. Such lock also prevents a memory block from
being freed or unmapped while it is being scanned by blocking the
kmemleak_free() -> ... -> __delete_object() function until the lock is
released in scan_object().
When a kmemleak error occurs (e.g. it fails to allocate its metadata),
kmemleak_enabled is set and __delete_object() is no longer called on freed
objects. If kmemleak_scan is running at the same time, kmemleak_free() no
longer waits for the object scanning to complete, allowing the
corresponding memory block to be freed or unmapped (in the case of
vfree()). This leads to kmemleak_scan potentially triggering a page
fault.
This patch separates the kmemleak_free() enabling/disabling from the
overall kmemleak_enabled nob so that we can defer the disabling of the
object freeing tracking until the scanning thread completed. The
kmemleak_free_part() is deliberately ignored by this patch since this is
only called during boot before the scanning thread started.
Change-Id: Idec67be116b23ee9aa56419e8f7c9e17df0086f2
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Vignesh Radhakrishnan <vigneshr@codeaurora.org>
Tested-by: Vignesh Radhakrishnan <vigneshr@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Git-commit: d613b66e1df80fddfff8e3eaa704243a955158db
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
Signed-off-by: Vignesh Radhakrishnan <vigneshr@codeaurora.org>
They don't have to be atomic_t, because they are simple boolean toggles.
Change-Id: I875f521382fd6f7ca909661fd04f1e98b7acccf6
Signed-off-by: Li Zefan <lizefan@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Git-commit: 8910ae896c8c961ef9c7d309262730bd2859e747
Git-repo: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/
Signed-off-by: Vignesh Radhakrishnan <vigneshr@codeaurora.org>
It is observed that in some cases process reclaim work
doesn't get chance to run due to presence of RT scheduled
on the same CPU. This is leading to user space freeze and
a live-lock situation where RT itself is looping for a
page to be present in swap cache while process reclaim
work is unable to schedule and do the same.
Schedule process reclaim work on unbounded cpu workqueue
so that the work has opportunity to be scheduled on to
other cpu.
Change-Id: I6852f7e8d0a344ab5631b188627263f11414f27e
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
There are places in kernel like the lowmemorykiller which
invokes show_mem_call_notifiers from an atomic context.
So move from a blocking notifier to atomic. At present
the notifier callbacks does not call sleeping functions,
but it should be made sure, it does not happen in future also.
Change-Id: I9668e67463ab8a6a60be55dbc86b88f45be8b041
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
swap_fn iterates through the threads of selected tasks after
a rcu_read_unlock which is wrong. But we can't extend the
rcu_read_lock since it will result in severe performance
issues. So better avoid iterating over the threads. Just
lock the group leader and use it further.
Change-Id: I36269b1b6619315f33f6f3b49ec73571a66796f2
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
commit 09789e5de18e4e442870b2d700831f5cb802eb05 upstream.
Currently memory_failure() calls shake_page() to sweep pages out from
pcplists only when the victim page is 4kB LRU page or thp head page.
But we should do this for a thp tail page too.
Consider that a memory error hits a thp tail page whose head page is on
a pcplist when memory_failure() runs. Then, the current kernel skips
shake_pages() part, so hwpoison_user_mappings() returns without calling
split_huge_page() nor try_to_unmap() because PageLRU of the thp head is
still cleared due to the skip of shake_page().
As a result, me_huge_page() runs for the thp, which is broken behavior.
One effect is a leak of the thp. And another is to fail to isolate the
memory error, so later access to the error address causes another MCE,
which kills the processes which used the thp.
This patch fixes this problem by calling shake_page() for thp tail case.
Fixes: 385de35722 ("thp: allow a hwpoisoned head page to be put back to LRU")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Dean Nelson <dnelson@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>