Commit graph

11 commits

Author SHA1 Message Date
Don Zickus
3e4ff11574 [PATCH] x86_64: nmi watchdog header cleanup
Misc header cleanup for nmi watchdog.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 10:48:16 -07:00
Adrian Bunk
a0b4da91f4 [PATCH] arch/i386/kernel/apic.c: make modern_apic() static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:56 -07:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Andi Kleen
95d769aaf4 [PATCH] i386: Consolidate modern APIC handling
AMD systems have a modern APIC that supports 8 bit IDs, but
don't have a XAPIC version number.  Add a new "modern_apic"
subfunction that handles this correctly and use it (nearly)
everywhere where XAPIC is tested for.

I removed one wart: the code specified that external APICs
would use an 8bit APIC ID. But I checked a real 82093 data sheet
and it says clearly that they only use 4bit. So I removed
this special case since it would a bit awkward to implement now.

I removed the valid APIC tests in mptable parsing completely. On any modern
system they only check against the full field width (8bit) anyways
and are no-ops. This also fixes them doing the wrong thing
on >8 core Opterons.

This makes i386 boot again on 16 core Opterons.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09 11:53:51 -07:00
Andi Kleen
f9262c12c0 [PATCH] i386: port ATI timer fix from x86_64 to i386 II
ATI chipsets tend to generate double timer interrupts for the local APIC
timer when both the 8254 and the IO-APIC timer pins are enabled.  This is
because they route it to both and the result is anded together and the CPU
ends up processing it twice.

This patch changes check_timer to disable the 8254 routing for interrupt 0.

I think it would be safe on all chipsets actually (i tested it on a couple
and it worked everywhere) and Windows seems to do it in a similar way, but
to be conservative this patch only enables this mode on ATI (and adds
options to enable/disable too)

Ported over from a similar x86-64 change.

I reused the ACPI earlyquirk infrastructure for the ATI bridge check, but
tweaked it a bit to work even without ACPI.

Inspired by a patch from Chuck Ebbert, but redone.

Cc: Chuck Ebbert <76306.1226@compuserve.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08 18:10:31 -08:00
Venkatesh Pallipadi
6eb0a0fd05 [PATCH] i386: Handle missing local APIC timer interrupts on C3 state
Whenever we see that a CPU is capable of C3 (during ACPI cstate init), we
disable local APIC timer and switch to using a broadcast from external timer
interrupt (IRQ 0). This is needed because Intel CPUs stop the local
APIC timer in C3.  This is currently only enabled for Intel CPUs.

Patch below adds the code for i386 and also the ACPI hunk.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 19:04:54 -08:00
Chuck Ebbert
66759a01ad [PATCH] x86-64: i386/x86-64: Fix time going twice as fast problem on ATI Xpress chipsets
Original patch from Bertro Simul

This is probably still not quite correct, but seems to be
the best solution so far.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 10:50:58 -07:00
Eric W. Biederman
650927ef8a [PATCH] kexec: x86: resture apic virtual wire mode on shutdown
When coming out of apic mode attempt to set the appropriate
apic back into virtual wire mode.  This improves on previous versions
of this patch by by never setting bot the local apic and the ioapic
into veritual wire mode.

This code looks at data from the mptable to see if an ioapic has
an ExtInt input to make this decision.  A future improvement
is to figure out which apic or ioapic was in virtual wire mode
at boot time and to remember it.  That is potentially a more accurate
method, of selecting which apic to place in virutal wire mode.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:47 -07:00
Eric W. Biederman
9635b47d91 [PATCH] kexec: x86: local apic fix
From: "Maciej W. Rozycki" <macro@linux-mips.org>

Fix a kexec problem whcih causes local APIC detection failure.

The problem is detect_init_APIC() is called early, before the command line
have been processed.  Therefore "lapic" (and "nolapic") have not been seen,
yet.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:46 -07:00
Jack F Vogel
67701ae976 [PATCH] check nmi watchdog is broken
A bug against an xSeries system showed up recently noting that the
check_nmi_watchdog() test was failing.

I have been investigating it and discovered in both i386 and x86_64 the
recent change to the routine to use the cpu_callin_map has uncovered a
problem.  Prior to that change, on an SMP box, the test was trivally
passing because all cpu's were found to not yet be online, but now with the
callin_map they are discovered, it goes on to test the counter and they
have not yet begun to increment, so it announces a CPU is stuck and bails
out.

On all the systems I have access to test, the announcement of failure is
also bougs...  by the time you can login and check /proc/interrupts, the
NMI count is happily incrementing on all CPUs.  Its just that the test is
being done too early.

I have tried moving the call to the test around a bit, and it was always
too early.  I finally hit on this proposed solution, it delays the routine
via a late_initcall(), seems like the right solution to me.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:48 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00