Commit graph

175 commits

Author SHA1 Message Date
Paul Mackerras
f40e524eae [POWERPC] Fix building of COFF zImages
The COFF zImage (for booting oldworld powermacs) wasn't being built
correctly because the procedure descriptor in crt0.S for the zImage
entry point wasn't declared as .globl, and therefore wasn't getting
pulled in from wrapper.a by the linker.  This adds the necessary
.globl statement.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-07 22:21:31 +10:00
Milton Miller
627aa944a1 [POWERPC] Fix zImage.coff generation for 32-bit pmac
Commit 9da82a6dee inadvertently
removed the platform override for zImage.coff to be generated
with pmaccoff.   Rather than add a special makefile rule,
change the platform for which the wrapper platform uses
the special rules.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-02 22:26:22 +10:00
David Gibson
b610b9780b [POWERPC] Don't use HOSTCFLAGS in BOOTCFLAGS
In the bootwrapper code for powerpc, we include HOSTCFLAGS into the
BOOTCFLAGS used for building the zImage wrapper code.  Since the
wrapper code is not host code, this makes no sense.  This patch
removes the use of HOSTCFLAGS here, instead including directly into
BOOTCFLAGS those flags from the normal kernel CFLAGS which also make
sense in the bootwrapper code.

In particular, this makes the bootwrapper use -msoft-float, preventing
the compiler from generating floating point instructions.  Previously,
under some circumstances the compiler could generate floating point
instructions in the bootwrapper which would cause exceptions on
embedded CPUS which don't have floating point support.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-02 21:01:56 +10:00
Stephen Rothwell
0570d4ed43 [POWERPC] Create a zImage for legacy iSeries
This zImage is really just the stripped vmlinux, but it means that there
is one less special case for iSeries and also that the zImages will be
built for a combined kernel build that happens to include iSeries.

This zImage boots fine on legacy iSeries.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-02 21:01:56 +10:00
David Gibson
988519acb3 [POWERPC] Fix compiler/assembler flags for Ebony platform boot files
The recent addition of assembler flags for 44x.c and ebony.c in the
bootwrapper to make them compile on certain toolchains was not correct
and could break other platforms.  This patch switches to using a
compiler flag instead, which implies the appropriate assembler flag,
and also stops the compiler itself generating instructions which are
invalid for the platform in question.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-02 21:01:55 +10:00
Domen Puncer
f2fb9eb348 [POWERPC] 52xx: unbreak lite5200 dts (_pic vs. -pic)
Unbreak lite5200 dts, which were broken by
5c1992f833

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-23 07:18:00 -05:00
Josh Boyer
60e417536b [POWERPC] Pass per-file CFLAGs for platform specific op codes
As a result of compiling all of the wrapper files for every platform
now, the kernel build can fail for toolchains that don't support various
op codes by default.  An example of this building a 7xx platform with
the ELD4.0 toolchain, is below:

/tmp/ccYjhJoL.s: Assembler messages:
/tmp/ccYjhJoL.s:42: Error: Unrecognized opcode: `mtdcr'
/tmp/ccYjhJoL.s:43: Error: Unrecognized opcode: `mfdcr'
make[1]: *** [arch/powerpc/boot/44x.o] Error 1

The following patch introduces additional CFLAGS for the 4xx specific
files and fixes the kernel compile.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-17 21:11:19 +10:00
Segher Boessenkool
67ccd2fcd4 [POWERPC] Fix sed command lines for zlib source construction
Not every sed understands \+ so use the more portable * instead.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-17 21:11:15 +10:00
David Gibson
c72ea777d4 [POWERPC] Small fixes for the Ebony device tree
This patch corrects a number of minor errors in the Ebony device tree:
	- Missing (given as 0) cache sizes are added to the CPU node
	- device_type properties are removed from nodes which don't
have a reasonably well defined device_type binding.  This does require
a very small code change to locate the busses to be probed for
of_platform devices by 'compatible' instead of 'device_type'.
	- A node is added for the SRAM controller
	- The unit address of the small-flash node is adjusted to
correctly reflect the reg property.
	- device_type values for the MAL and ZMII are updated to
reflected more up-to-date versions of the binding.
	- An incorrect offset in the partition map for the large-flash
node is corrected.
	- Some redundant values, already commented out are removed
entirely.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-17 21:11:14 +10:00
David Gibson
6a32d085ae [POWERPC] Fix make rules for treeImage.initrd
At present attempting to build treeImage.initrd.* boot images will
fail, because make will select the treeImage.% rule which also matches
instead of the correct and more specific treeImage.initrd.% rule.
This patch corrects the problem by listing the more specific rule
first.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-17 21:11:14 +10:00
David Gibson
7c40542ffa [POWERPC] Fix bug adding properties with flatdevtree.c's ft_set_prop()
ft_set_prop() from flatdevtree.c in the zImage wrapper will either
replace an existing property in the flat device tree, or add a new
property definiion if the given property isn't present.

However, when adding properties, it adds the property definition
immediately before the node's END_NODE tag, potentially after any
subnode definitions for the node.  This confuses the kernel flat tree
parser in prom.c which assumes that all property definitions for a
node come before all subnode definitions.

This patch corrects ft_set_prop() so that it adds new properties
before the first subnode, instead of before the END_NODE tag.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-17 21:11:13 +10:00
Kumar Gala
5c1992f833 [POWERPC] Removed hardcoded phandles from dts
Remove explicit phandles and move to using references that autogenerate the
phandles when needed.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-17 21:10:17 +10:00
Kumar Gala
4da421d620 [POWERPC] 85xx: Add device nodes for error reporting devices used by EDAC
Adding memory-controller and l2-cache-controller entries to be used by EDAC
as of_devices for MPC8541 CDS, MPC8544 DS, MPC8555 CDS, and MPC8568 MDS.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-17 21:10:17 +10:00
Dave Jiang
50cf67075b [POWERPC] 85xx: Add device nodes for error reporting devices used by EDAC
Adding memory-controller and l2-cache-controller entries to be used by EDAC
as of_devices for MPC8540 ADS, MPC8548 CDS, and MPC8560 ADS.

Also fixed up the size of the PCI node on MPC8560 ADS.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-17 21:10:16 +10:00
Mark A. Greer
c368d921da [POWERPC] Add bootwrapper support for Motorola PrPMC2800 platform
The Motorola PrPMC280 and PrPMC2800 processor modules sit on an F101 or
PrPMC2800 baseboard, respectively.  There are several variants of each
type of processor module which can have different amounts of memory,
amounts of FLASH, cpu frequencies, and an mv64360 or an mv64362.

The bootwrapper code for that platform reads VPD from an I2C EEPROM
to determine the processor module variant.  From the variant, the
amount of memory, etc. is determined and the device tree is updated
accordingly.  If the variant cannot be determined (e.g., corrupted
VPD or a previously unknown variant), the property values already
in the device tree are used.

Also, the firmware for those platforms does not completely configure
the mv64x60 host bridge so that configuration is done here.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:50 +10:00
Mark A. Greer
3f456cc18f [POWERPC] Add DTS file for the Motorola PrPMC2800 platform
Add the device tree source file for the prpmc2800 line of processor PMCs.
Several of the property values are updated by the bootwrapper but sane
defaults have been chosen in case the bootwrapper can't determine the
exact processor board variant.  The defaults should allow the kernel
to boot despite having non-optimal device tree property values.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:50 +10:00
Mark A. Greer
ae4b3fbc7a [POWERPC] Add bootwrapper support for Marvell/mv64x60 I2C
Some platforms support a variety processor modules with no method of
determining which exact processor module is being used except by
examining Vital Product Data (VPD).  The modules may have different
amounts of memory, clock frequencies, etc. so reading the VPD becomes
necessary to correctly set properties in the device tree before its
passed to the kernel.

Often the VPD is stored in I2C EEPROMs so an I2C driver becomes necessary.
This I2C driver is for the I2C controller that's embedded on the Marvel
mv64x60 line of host bridges.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:49 +10:00
Mark A. Greer
e12deb840c [POWERPC] Add bootwrapper support for Marvell MPSC
The bootwrapper requires a serial driver to allow cmdline editing
and information reporting on the console.  This driver is required
by platforms that boot a zImage and use the MPSC for the console.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:49 +10:00
Mark A. Greer
0f81b11d2a [POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge
The mv64x60 host bridge has many windows between its various components
(cpu, system memory, ethernet ctlr, MPSC, DMA ctlr, PCI MEM, PCI I/O).
Unfortunately, the firmware on some of mv64x60-based platforms do not
properly or completely configure those windows (e.g., MPSC->system memory
windows not configured or CPU->PCI MEM space not configured).

So, the missing configuration needs to be done in either the bootwrapper
or in the kernel.  To keep the kernel as clean as possible, it is done
in the bootwrapper.  Note that I/O controller configuration is NOT being
done, its only the windows to allow the I/O controllers and other components
to access memory, etc. that is being done--drivers assume that their
controllers can already access system memory).

Table of routines and the windows they configure:
	mv64x60_config_ctlr_windows()	ENET->System Memory
					MPSC->System Memory
					IDMA->System Memory

	mv64x60_config_pci_windows()	PCI MEM->System Memory
					PCI I/O->Bridge's Registers

	mv64x60_config_cpu2pci_window()	CPU->PCI MEM
					CPU->PCI I/O

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:49 +10:00
Mark A. Greer
916066d591 [POWERPC] Add Makefile rules to wrap dts file in zImage
Add 'zImage.dts' and 'zImage.dts_initrd' build rules that automatically
compile and wrap a dts file from arch/powerpc/boot/dts into the zImage file.
The resulting zImage will be arch/powerpc/boot/zImage.dts.<platform> and
arch/powerpc/boot/zImage.dts_initrd.<platform>, respectively.

Having separate rules allows the user to choose whether to include a device
tree--and which device tree--at build time.  This is useful when one Makefile
target builds a zImage that runs on several platforms except for differing
device trees.  By just setting CONFIG_DEVICE_TREE and running "make zImage.dts"
the exact zImage you want is built without Makefile bloat or manually running
the wrapper script.

The dts file is expected to be arch/powerpc/boot/dts/$(CONFIG_DEVICE_TREE)

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:49 +10:00
Scott Wood
dab4d7984e [POWERPC] U-boot passes the initrd as start/end, not start/size.
The boot wrapper platform init code on 83xx and 85xx using the cuboot
platform type was incorrectly assuming that u-boot supplied the size
of the initrd, whereas it actually supplies the end address.  This
fixes it.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:48 +10:00
Scott Wood
3fae4210ba [POWERPC] 83xx: Fix the PCI ranges in the MPC834x_MDS device tree.
The MPC834x_MDS device tree's PCI non-prefetchable MMIO range was
specified incorrectly.  Both the local and bus addresses start at
0x90000000.
    
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:07:52 -05:00
Scott Wood
d985f68e34 [POWERPC] 83xx: Fix the PCI ranges in the MPC832x_MDS device tree.
The MPC832x_MDS device tree's PCI non-prefetchable MMIO range was
specified incorrectly.  Both the local and bus addresses start at
0x90000000.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09 23:06:11 -05:00
David Gibson
f6dfc80554 [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc
This adds platform support code for the Ebony (440GP) evaluation
board.  This includes both code in arch/powerpc/platforms/44x for
board initialization, and zImage wrapper code to correctly tweak the
flattened device tree based on information from the firmware.  The
zImage supports both IBM OpenBIOS (aka "treeboot") and old versions of
uboot which don't support a flattened device tree.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 14:47:32 +10:00
David Gibson
ea20ff5d03 [POWERPC] Add device tree for Ebony
Add a device tree for the Ebony evaluation board (440GP based).  This
tree is not complete or finalized.  This tree needs a version of dtc
recent enough to include reference-to-labels to process.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 14:43:59 +10:00
Josh Boyer
7487a2245b [POWERPC] Holly bootwrapper
Add Holly/Hickory bootwrapper

Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 11:54:21 +10:00
Josh Boyer
d4d19ec493 [POWERPC] Holly DTS
Add Holly DTS file

Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 11:54:20 +10:00
Domen Puncer
5cae84c971 [POWERPC] lite5200(b) support for i2c
Add fsl-i2c to mpc5200 i2c node in device tree, and enable FSL_SOC.

Tested to work with built-in eeprom on lite5200b.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
Domen Puncer
0d0f4bc70e [POWERPC] lite5200(b) DTS fixes
Three trivial DTS fixes:
 -Mark Lite5200(b) boards as "mpc5200" compatible. On efika the
  firmware already does that.
 -Fix mscan interrupt.
 -Fix wakeup GPIO address.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
David Gibson
d25a9d66e0 [POWERPC] Fix some missing build dependencies in arch/powerpc/boot
This patch fixes a couple of missing dependencies in
arch/powerpc/boot/Makefile.  First, it ensures that the zlib.h header
is linked in before attempting to build gunzip_util.o, as it is,
building gunzip_util.o usually works, but not always depending on make
order.

Second, it makes the final images which are built using a dts
dependent on that dts, so the image will be correctly rebuilt if the
dts changes.  This in turn requires fixing the definition of the dts
variable.  CONFIG_DEVICE_TREE from Kconfig will have quotes around it,
which don't matter when passing the variable to a shell, but which
need to be removed when incorporating it into a filename for make's
use.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:15 +10:00
Scott Wood
ac18c673e7 [POWERPC] bootwrapper: Only build cuImage if CONFIG_DEVICE_TREE is non-empty
This allows the zImage target to once again be used to build
all supported image types, rather than requiring an explicit
"make uImage" to avoid failing to create an unneeded cuImage.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:13 +10:00
David Gibson
a6afacb6b8 [POWERPC] Small cleanups to the cuboot bootwrapper code
This patch makes a few small cleanups to the cuboot code.
	- It removes the double layered selection of images, via
cuboot-plat-y, instead having the cuboot platforms directly select a
suitable image-y (this changes the name of the final cuboot image from
plain cuImage to cuImage.<platform>).
	- Factors out some code in the wrapper that's potentially
useful to platforms other than uboot.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:31 +10:00
Kim Phillips
0fd8c47ccc [POWERPC] Replace undocumented interface properties in dts files
phy-connection-type now supersedes the interface property.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:29 +10:00
Mark A. Greer
8895ea483e [POWERPC] Add dt_xlate_addr() to bootwrapper
dt_xlate_reg() looks up the 'reg' property in the specified node
to get the address and size to translate.  Add dt_xlate_addr()
which is passed in the address and size to translate.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:05 +10:00
Scott Wood
d818d7ec8b [POWERPC] bootwrapper: CONFIG_ -> CONFIG_DEVICE_TREE
A usage of CONFIG_DEVICE_TREE got accidentally truncated; this
fix allows out-of-tree dts files to work.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:04 +10:00
Scott Wood
173ba87b95 [POWERPC] bootwrapper: cuboot-83xx: Exclude upper 1MB from heap.
The uppermost part of memory is where u-boot puts the stack, so don't
include that in the heap.  It's not currently causing problems, as the
current code allocates from the bottom of the heap, but this will keep
things from potentially breaking if a future implementation were to
allocate from the top.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:14:21 +10:00
Scott Wood
4536b93746 [POWERPC] bootwrapper: cuImage for 85xx
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:14:15 +10:00
Scott Wood
e4bb688d9f [POWERPC] bootwrapper: Fix array handling in dt_xlate_reg().
This fixes a few bugs in how dt_xlate_reg() handles address arrays:

1. copy_val() was copying into the wrong end of the array, resulting
in random stack garbage at the other end.
2. dt_xlate_reg() was getting the result from the wrong end of the array.
3. add_reg() and sub_reg() were treating the arrays as
little-endian rather than big-endian.
4. add_reg() only returned an error on a carry out of the entire
array, rather than out of the naddr portion.
5. The requested reg resource was checked to see if it exceeded
the size of the reg property, but not to see if it exceeded the
size of the buffer.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:13:56 +10:00
Milton Miller
3c5f616254 [POWERPC] boot: More verbose gunzip error message
Change the error message in gunzip_exactly to be more verbose.

Besides the identifier being unrelated to the current function name,
the user had no indication if the corruption was near the beginning
or the end.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:13:49 +10:00
Akinobu Mita
928370c676 [POWERPC] Enable make install
make help on powerpc says make install is available.
But it failed due to no rule to make install.

This patch enables make install to work.

Signed-off-by: Akinobu Mita <mita@fixstars.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:13:43 +10:00
Grant Likely
e3f64788d3 [POWERPC] Fix comment typo in Kurobox device tree
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:06:56 +10:00
Geert Uytterhoeven
4ca478e606 [POWERPC] bootwrapper: Use `unsigned long' for malloc sizes
Use `unsigned long' for malloc sizes, to match common practice and types used
by most callers and callees.
Also use `unsigned long' for integers representing pointers in simple_alloc.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@eu.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:06:54 +10:00
Scott Wood
5cc5133a29 [POWERPC] bootwrapper: cuboot for 83xx
This adds cuboot support for MPC83xx platforms.

A device tree used with this must have linux,stdout-path in /chosen and
linux,network-index in any network device nodes that need mac addresses
assigned.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:56 +10:00
Scott Wood
9b1c59e256 [POWERPC] bootwrapper: Add ppcboot.h
This file describes the bd_t struct, which is used by old versions of
U-boot to pass information to the kernel.  Platform code that needs to
interoperate with such firmware can use this; it should not be used for
anything new.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:55 +10:00
Scott Wood
0fdd717ed4 [POWERPC] bootwrapper: Add a cuboot platform and a cuImage target
The cuImage target will build a uImage with bootwrapper code and a device
tree.  The default device tree and platform file are determined by the
kernel configuration.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:31:54 +10:00
Paul Mackerras
390cbb56a7 [POWERPC] Fix detection of loader-supplied initrd on OF platforms
Commit 79c8541924 introduced code to move
the initrd if it was in a place where it would get overwritten by the
kernel image.  Unfortunately this exposed the fact that the code that
checks whether the values passed in r3 and r4 are intended to indicate
the start address and size of an initrd image was not as thorough as the
kernel's checks.  The symptom is that on OF-based platforms, the
bootwrapper can cause an exception which causes the system to drop back
into OF.

Previously it didn't matter so much if the code incorrectly thought that
there was an initrd, since the values for start and size were just passed
through to the kernel.  Now the bootwrapper needs to apply the same checks
as the kernel since it is now using the initrd data itself (in the process
of copying it if necessary).  This adds the code to do that.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 10:46:21 +10:00
Milton Miller
02cc51149f [POWERPC] bootwrapper: Decompress less, check more
Our kernels put everything in the first load segment, and we read that.
Instead of decompressing to the end of the gzip stream or supplied image
and hoping we get it all, decompress the expected size and complain if
it is not available.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:17 +10:00
Milton Miller
1383a34faf [POWERPC] bootwrapper: no-gzip fixes
Commit a9903811bf missed two uses of the
the .gz suffix in the wrapper script and didn't clean the additonal
possibly cached files.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:16 +10:00
Milton Miller
f4bdbfc41b [POWERPC] bootwrapper: missing relocation in crt0.S
crt0.S had provisions to provide run address relocaton to got2 and
cache flush, but not on the bss clear or stack pointer load.  Apply
the same fixup for them.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:16 +10:00
Mark A. Greer
d6f1d2a9a8 [POWERPC] Routine to find the devtree node of a linux,phandle
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:16 +10:00