Commit graph

23 commits

Author SHA1 Message Date
Ralf Baechle
572afc248c [MIPS] R1: Fix hazard barriers to make kernels work on R2 also.
Tested with Malta; inflates malta_defconfig by 3932 bytes.  Ideally there
should be additional configuration to allow getting rid of this overhead
but that would be too much complexity at this stage of the release cycle.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:19 +01:00
Ralf Baechle
21a151d8ca [MIPS] checkfiles: Fix "need space after that ','" errors.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:15 +01:00
Ralf Baechle
7b0fdaa6a1 [MIPS] Provide empty irq_enable_hazard definition for legacy and R1 cores.
Following a strict interpretation the empty definition of irq_enable_hazard
has always been a bug - but an intentional one because it didn't bite.
This has now changed, for uniprocessor kernels mm/slab.c:do_drain()

[...]
        on_each_cpu(do_drain, cachep, 1, 1);
        check_irq_on();
[...]

may be compiled into a mtc0 c0_status; mfc0 c0_status sequence resulting
in a back-to-back hazard.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-10 21:25:28 +01:00
Ralf Baechle
98de920a2a [MIPS] Add missing declaration for mips_ihb().
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31 21:35:26 +01:00
Ralf Baechle
a1b53a7b22 [MIPS] SB1: Build fix.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-05-11 14:28:31 +01:00
Chris Dearman
0b6249567b [MIPS] FPU hazard handling
Move FPU hazard handling to hazards.h and provide proper support for
MIPSR2 processors

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-05-11 14:28:31 +01:00
Ralf Baechle
7605b39061 [MIPS] Fix pipeline hazard.
In the the sequence:
        ei
        ..
        mfc0    $x, $status

the mfc0 may not see the SR_IE bit set. This was a deliberate bug in the
kernel code because we knew this was a safe thing to do on all R2 silicon
so far but new silicon is changing this.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-24 17:01:49 +00:00
Yoichi Yuasa
3f3183709f [MIPS] vr41xx: need one more nop with mtc0_tlbw_hazard()
NEC VR4111 and VR4121 need one more nop with mtc0_tlbw_hazard().

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-01-24 19:23:21 +00:00
Ralf Baechle
36396f3c36 [MIPS] s/__ASSEMBLER__/__ASSEMBLY__/ for clarity sake.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27 13:37:57 +01:00
Ralf Baechle
d7d86aa88a [MIPS] Cleanup hazard handling.
Mostly based on patch by Chris Dearman and cleanups from Yoichi.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27 13:37:53 +01:00
Ralf Baechle
8db089c6b5 [MIPS] Add missing backslashes to macro definitions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-29 21:10:55 +01:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Ralf Baechle
41c594ab65 [MIPS] MT: Improved multithreading support.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19 04:14:28 +02:00
Ralf Baechle
a3c4946db4 [MIPS] SB1: Fix interrupt disable hazard.
The SB1 core has a three cycle interrupt disable hazard but we were
wrongly treating it as fully interlocked.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18 16:59:26 +00:00
Ralf Baechle
05faa7b758 [MIPS] Fix C version of ssnop to use the right opcode.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07 13:30:21 +00:00
Ralf Baechle
7043ad4f4c MIPS: R2: Try to bulletproof instruction_hazard against miss-compilation.
Gcc has a tradition of misscompiling the previous construct using the
address of a label as argument to inline assembler.  Gas otoh has the
annoying difference between la and dla which are only usable for 32-bit
rsp. 64-bit code, so can't be used without conditional compilation.
The alterantive is switching the assembler to 64-bit code which happens
to work right even for 32-bit code ...
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-01-10 13:39:08 +00:00
Ralf Baechle
ec917c2c1a Fixup a few lose ends in explicit support for MIPS R1/R2.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:37 +01:00
Ralf Baechle
f5cfa980e5 Use R4000 TLB routines for SB1 also.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:31 +01:00
Ralf Baechle
86071b637d Cleanups.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:53 +01:00
Ralf Baechle
cc61c1fede MIPS R2 instruction hazard handling.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:46 +01:00
Ralf Baechle
88d535b6b5 One definition of back_to_back_c0_hazard too much.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:50 +01:00
Ralf Baechle
5068debff2 New hazard handling function back_to_back_c0_hazard() to handle back to
back mtc0 / mfc0 pairs from the same coprocessor register.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:49 +01:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00