Commit graph

14107 commits

Author SHA1 Message Date
Ingo Molnar
9a11b49a80 [PATCH] lockdep: better lock debugging
Generic lock debugging:

 - generalized lock debugging framework. For example, a bug in one lock
   subsystem turns off debugging in all lock subsystems.

 - got rid of the caller address passing (__IP__/__IP_DECL__/etc.) from
   the mutex/rtmutex debugging code: it caused way too much prototype
   hackery, and lockdep will give the same information anyway.

 - ability to do silent tests

 - check lock freeing in vfree too.

 - more finegrained debugging options, to allow distributions to
   turn off more expensive debugging features.

There's no separate 'held mutexes' list anymore - but there's a 'held locks'
stack within lockdep, which unifies deadlock detection across all lock
classes.  (this is independent of the lockdep validation stuff - lockdep first
checks whether we are holding a lock already)

Here are the current debugging options:

CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y

which do:

 config DEBUG_MUTEXES
          bool "Mutex debugging, basic checks"

 config DEBUG_LOCK_ALLOC
         bool "Detect incorrect freeing of live mutexes"

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:01 -07:00
Ingo Molnar
3e541a4ae5 [PATCH] lockdep: floppy.c irq release fix
The lock validator triggered a number of bugs in the floppy driver, all
related to the floppy driver allocating and freeing irq and dma resources from
interrupt context.  The initial solution was to use schedule_work() to push
this into process context, but this caused further problems: for example the
current floppy driver in -mm2 is totally broken and all floppy commands time
out with an error.  (as reported by Barry K.  Nathan)

This patch tries another solution: simply get rid of all that dynamic IRQ and
DMA allocation/freeing.  I doubt it made much sense back in the heydays of
floppies (if two devices raced for DMA or IRQ resources then we didnt handle
those cases too gracefully anyway), and today it makes near zero sense.

So the new code does the simplest and most straightforward thing: allocate IRQ
and DMA resources at module init time, and free them at module removal time.
Dont try to release while the driver is operational.  This, besides making the
floppy driver functional again has an added bonus, floppy IRQ stats are
finally persistent and visible in /proc/interrupts:

  6: 63 XT-PIC-level floppy

Besides normal floppy IO i have also tested IO error handling, motor-off
timeouts, etc.  - and everything seems to be working fine.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:00 -07:00
Andrew Morton
6b8f3ef454 [PATCH] sparc i8042 build fix
drivers/input/serio/i8042-sparcio.h:91: error: '__mod_of_device_table' aliased to undefined symbol 'i8042_match'

Cc: Dmitry Torokhov <dtor_core@ameritech.net>
DESC
sparc: resource warning fix
EDESC
From: Andrew Morton <akpm@osdl.org>

sound/sparc/amd7930.c: In function 'amd7930_attach_common':
sound/sparc/amd7930.c:1040: warning: format '%08lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:00 -07:00
Arjan van de Ven
62322d2554 [PATCH] make more file_operation structs static
Mark the static struct file_operations in drivers/char as const.  Making
them const prevents accidental bugs, and moves them to the .rodata section
so that they no longer do any false sharing; in addition with the proper
debug option they are then protected against corruption..

[akpm@osdl.org: build fix]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:26:59 -07:00
Antonino A. Daplas
d459ec0baa [PATCH] vt: Decrement ref count of the VT backend on deallocation
When a VT is newly allocated, the module reference count of the backend
will be incremented.  This should be balanced by a module_put() when this
VT is deallocated.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:26:59 -07:00
Vitaly Wool
36c9366efd [PATCH] fbdev: Add framebuffer and display update module support for pnx4008
Add support for Display Update Module and RGB framebuffer device on Philips
PNX4008 ARM board.

Signed-off-by: Grigory Tolstolytkin <gtolstolytkin@ru.mvista.com>
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:26:59 -07:00
Bjorn Helgaas
cb6358eb69 [PATCH] SERIAL: allow shared 8250_pnp interrupts
PNP devices can use shared interrupts, so check to see whether we'll need
SA_SHIRQ for request_irq().

The builtin PDH UART on the HP rx8640 is an example of an ACPI/PNP device
that uses a shareable level-triggered, active-low interrupt.  The interrupt
can be shared in very large I/O configurations or by artificially lowering
IA64_DEF_LAST_DEVICE_VECTOR.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Cc: Li Shaohua <shaohua.li@intel.com>
Cc: Len Brown <len.brown@intel.com>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:26:58 -07:00
Bjorn Helgaas
c32928c579 [PATCH] PNPACPI: support shareable interrupts
ACPI supplies a "shareable" indication, but PNPACPI ignores it.  If a PNP
device uses a shared interrupt, request_irq() fails because the PNP driver
can't tell whether to supply SA_SHIRQ.

This patch allows PNP drivers to test
    (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Cc: Li Shaohua <shaohua.li@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:26:58 -07:00
Sam Ravnborg
63104eec23 kbuild: introduce utsrelease.h
include/linux/version.h contained both actual KERNEL version
and UTS_RELEASE that contains a subset from git SHA1 for when
kernel was compiled as part of a git repository.
This had the unfortunate side-effect that all files including version.h
would be recompiled when some git changes was made due to changes SHA1.
Split it out so we keep independent parts in separate files.

Also update checkversion.pl script to no longer check for UTS_RELEASE.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-07-03 23:30:54 +02:00
James Bottomley
c4e00fac42 Merge ../scsi-misc-2.6
Conflicts:

	drivers/scsi/nsp32.c
	drivers/scsi/pcmcia/nsp_cs.c

Removal of randomness flag conflicts with SA_ -> IRQF_ global
replacement.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-03 09:41:12 -05:00
Russell King
0f1482fdd7 [ARM] Fix lh7a40x_udc.c
In 3ae5eaec1d, I broke this driver
by missing a comma.  Replace the missing comma.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-03 15:32:47 +01:00
Russell King
61a116ef29 [SERIAL] Ensure 8250_pci quirks are not marked __devinit
The 8250_pci quirks must not be marked __devinit since they may
be used from parport_serial.  We only really need to mark those
which might be used by cards recognised by parport_serial, but
that wouldn't allow static checking.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-03 15:22:35 +01:00
Benjamin Herrenschmidt
0ebfff1491 [POWERPC] Add new interrupt mapping core and change platforms to use it
This adds the new irq remapper core and removes the old one.  Because
there are some fundamental conflicts with the old code, like the value
of NO_IRQ which I'm now setting to 0 (as per discussions with Linus),
etc..., this commit also changes the relevant platform and driver code
over to use the new remapper (so as not to cause difficulties later
in bisecting).

This patch removes the old pre-parsing of the open firmware interrupt
tree along with all the bogus assumptions it made to try to renumber
interrupts according to the platform. This is all to be handled by the
new code now.

For the pSeries XICS interrupt controller, a single remapper host is
created for the whole machine regardless of how many interrupt
presentation and source controllers are found, and it's set to match
any device node that isn't a 8259.  That works fine on pSeries and
avoids having to deal with some of the complexities of split source
controllers vs. presentation controllers in the pSeries device trees.

The powerpc i8259 PIC driver now always requests the legacy interrupt
range. It also has the feature of being able to match any device node
(including NULL) if passed no device node as an input. That will help
porting over platforms with broken device-trees like Pegasos who don't
have a proper interrupt tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 21:36:01 +10:00
Benjamin Herrenschmidt
3e9a69275f [POWERPC] Update the SWIM3 (powermac) floppy driver
Port the PowerMac floppy driver (swim3) to use the macio device
infrastructure.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 17:25:26 +10:00
Benjamin Herrenschmidt
ab13446616 [POWERPC] Fix various offb and BootX-related issues
This patch fixes various issues with offb (the default fbdev used on
powerpc when no proper fbdev is supported). It was broken when using
BootX under some circumstances and would fail to properly get the
framebuffer base address in others.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 17:19:48 +10:00
Linus Torvalds
f82bc1762e Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] sdhci: remove duplicate error message
  [MMC] sdhci: force DMA on some controllers
  [MMC] sdhci: quirk for broken reset
  [MMC] sdhci: Add SDHCI controller ids
2006-07-02 16:35:07 -07:00
Linus Torvalds
b4b9034132 Merge branch 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits)
  [ARM] 3683/2:  ARM: Convert at91rm9200 to generic irq handling
  [ARM] 3682/2:  ARM: Convert ixp4xx to generic irq handling
  [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling
  [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling
  [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling
  [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling
  [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling
  [ARM] 3697/1: ARM: Convert shark to generic irq handling
  [ARM] 3696/1: ARM: Convert clps711x to generic irq handling
  [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling
  [ARM] 3693/1: ARM: Convert omap1 to generic irq handling
  [ARM] 3691/1: ARM: Convert imx to generic irq handling
  [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling
  [ARM] 3687/1: ARM: Convert integrator to generic irq handling
  [ARM] 3685/1: ARM: Convert pxa to generic irq handling
  [ARM] 3684/1: ARM: Convert l7200 to generic irq handling
  [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling
  [ARM] 3680/1: ARM: Convert footbridge to generic irq handling
  [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes
  [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes
  ...

Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless
code).
2006-07-02 15:07:45 -07:00
Linus Torvalds
a8c4c20dfa Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits)
  [ARM] 3541/2: workaround for PXA27x erratum E7
  [ARM] nommu: provide a way for correct control register value selection
  [ARM] 3705/1: add supersection support to ioremap()
  [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure
  [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support
  [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency
  [ARM] 3703/1: Add help description for ARCH_EP80219
  [ARM] 3678/1: MMC: Make OMAP MMC work
  [ARM] 3677/1: OMAP: Update H2 defconfig
  [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1
  [ARM] Add section support to ioremap
  [ARM] Fix sa11x0 SDRAM selection
  [ARM] Set bit 4 on section mappings correctly depending on CPU
  [ARM] 3666/1: TRIZEPS4 [1/5] core
  ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring
  ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE
  ARM: OMAP: Update dmtimers
  ARM: OMAP: Make clock variables static
  ARM: OMAP: Fix GPMC compilation when DEBUG is defined
  ARM: OMAP: Mux updates for external DMA and GPIO
  ...
2006-07-02 15:04:12 -07:00
Linus Torvalds
168d04b3b4 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] sdhci: version bump sdhci
  [MMC] sdhci: support controller specific quirks
  [MMC] sdhci: more DMA capabilities tests
  [MMC] sdhci: reset sdhci controller early
  [MMC] sdhci: check controller version
  [MMC] sdhci: check only relevant inhibit bits
  [MMC] sdhci: Test for invalid block size
  [MMC] sdhci: Avoid sdhci DMA boundaries
  [MMC] Fix sdhci PIO routines
  [MMC] sdhci: fix interrupt handling
  [MMC] sdhci: correct register order
  [MMC] sdhci: proper timeout handling
  [MMC] sdhci: fix sdhci reset timeout
  [MMC] sdhci: fix timeout loops in sdhci
  [MMC] sdhci: support for multiple voltages
  [MMC] sdhci: print device id
  [MMC] sdhci: check SDHCI base clock
2006-07-02 14:58:03 -07:00
Thomas Gleixner
63a43399db [PATCH] irq-flags: video: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:53 -07:00
Thomas Gleixner
d54b5caa83 [PATCH] irq-flags: usb: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:53 -07:00
Thomas Gleixner
40663cc7f1 [PATCH] irq-flags: serial: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:53 -07:00
Thomas Gleixner
1d6f359a2e [PATCH] irq-flags: scsi: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:53 -07:00
Thomas Gleixner
5d8c8a2e8e [PATCH] irq-flags: rio: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:52 -07:00
Thomas Gleixner
6b4486e2e3 [PATCH] irq-flags: pci: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:52 -07:00
Thomas Gleixner
8c56e7214e [PATCH] irq-flags: PARISC: Use the new IRQF_ constants
Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:52 -07:00
Thomas Gleixner
1fb9df5d30 [PATCH] irq-flags: drivers/net: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:51 -07:00
Thomas Gleixner
dace145374 [PATCH] irq-flags: misc drivers: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:50 -07:00
Thomas Gleixner
8076fe32a7 [PATCH] irq-flags: media: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:50 -07:00
Thomas Gleixner
9ba02bec38 [PATCH] irq-flags: isdn: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:50 -07:00
Thomas Gleixner
272ee69c65 [PATCH] irq-flags: firewire: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@debian.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:50 -07:00
Thomas Gleixner
362537b9ab [PATCH] irq-flags: ide: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:49 -07:00
Thomas Gleixner
935f6e3abc [PATCH] irq-flags: drivers/drm: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:49 -07:00
Thomas Gleixner
0f2ed4c6ba [PATCH] irq-flags: drivers/char: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:49 -07:00
Thomas Gleixner
69ab3912d1 [PATCH] irq-flags: drivers/block Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:49 -07:00
Russell King
947deee890 [SERIAL] Convert fifosize to an unsigned int
Some UARTs have more than 255 bytes of FIFO, which can't be
represented by an unsigned char.  Change the kernel's internal
structure to be an unsigned int, but still export an unsigned char
via the TIOCGSERIAL ioctl.  If the TIOCSSERIAL ioctl provides a
fifo size of 0, assume this means "don't change" otherwise we'll
corrupt the larger fifo sizes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 20:45:51 +01:00
Pierre Ossman
4cca56c504 [MMC] sdhci: remove duplicate error message
When there is remaining blocks untransferred, we get two error messages saying
almost the same thing.  Make sure at most one is shown.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 18:02:02 +01:00
Pierre Ossman
98608076a2 [MMC] sdhci: force DMA on some controllers
Some controllers incorrectly report that the cannot do DMA.  Forcefully enable
it for those that we know it works fine on.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 18:02:01 +01:00
Pierre Ossman
645289dca5 [MMC] sdhci: quirk for broken reset
Some controllers fail to complete a reset unless you touch the clock register
first.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 18:02:00 +01:00
James Bottomley
d6b0c53723 [SCSI] fix error handling in scsi_io_completion
There was a logic fault in scsi_io_completion() where zero transfer
commands that complete successfully were sent to the block layer as
not up to date.  This patch removes the if (good_bytes > 0) gate
around the successful completion, since zero transfer commands do have
good_bytes == 0.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-02 11:17:19 -05:00
Pierre Ossman
2c5f394025 [MMC] sdhci: version bump sdhci
New version number for sdhci driver.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:55:00 +01:00
Pierre Ossman
df673b227c [MMC] sdhci: support controller specific quirks
As some specific controllers will have bugs, we need a way to map special
behaviour to certain hardware.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:54:59 +01:00
Pierre Ossman
6743527441 [MMC] sdhci: more DMA capabilities tests
Properly test for controller interface to see if it's DMA capable.  As many
controllers are misconfigured in this regard, also add debug parameters to
force DMA support either way.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:54:56 +01:00
Pierre Ossman
d96649ed5a [MMC] sdhci: reset sdhci controller early
The specification states that the capabilities register might need a reset to
get correct values after boot up.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:54:54 +01:00
Pierre Ossman
4a9655051f [MMC] sdhci: check controller version
Check the interface version of the controller and bail out if it's an unknown
version.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:54:53 +01:00
Pierre Ossman
fd2208d7c7 [MMC] sdhci: check only relevant inhibit bits
Conform to the sdhci specification as to which inhibit bits should be checked
at different times.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:54:50 +01:00
Pierre Ossman
1d676e0297 [MMC] sdhci: Test for invalid block size
The controller has an upper limit on the block size. Make sure we do not
cross it.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:52:10 +01:00
Pierre Ossman
bab7696184 [MMC] sdhci: Avoid sdhci DMA boundaries
The sdhci controllers will issue an interrupt when a configurable number of
bytes have been transfered using DMA. The purpose is to handle multiple,
scattered memory pages.

Unfortunately, it requires that all transfers are completely aligned to
memory pages, which we cannot guarantee. So we just disable the function.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:51:35 +01:00
Pierre Ossman
a406f5a3b6 [MMC] Fix sdhci PIO routines
The sdhci controllers operate with blocks, not bytes. The PIO routines must
therefore make sure that the minimum unit transfered is a complete block.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:50:59 +01:00
Pierre Ossman
3192a28f7d [MMC] sdhci: fix interrupt handling
The specification says that interrupts should be cleared before the source is
removed.  We should also not set unknown bits.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:02:05 +01:00
Pierre Ossman
c7fa9963ee [MMC] sdhci: correct register order
The sdhci specification states that some registers must be written to in a
specific order.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:02:04 +01:00
Pierre Ossman
1c8cde92fa [MMC] sdhci: proper timeout handling
Use the give timeout clock and calculate a proper timeout instead of using the
maximum at all times.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:02:04 +01:00
Pierre Ossman
e16514d8d8 [MMC] sdhci: fix sdhci reset timeout
The reset register is automatically cleared when the reset has completed.
Hence, we should busy wait and not have a fixed delay.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:02:03 +01:00
Pierre Ossman
7cb2c76fa2 [MMC] sdhci: fix timeout loops in sdhci
The current timeout loop assume that jiffies are updated.  This might not be
the case depending on locks and if the kernel is compiled without preemption.
Change the system to use a counter and fixed delays.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:02:02 +01:00
Pierre Ossman
146ad66eac [MMC] sdhci: support for multiple voltages
The sdhci controllers can support up to three voltage levels.  Detect which
and report back to the MMC layer.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:02:01 +01:00
Pierre Ossman
51f82bc07a [MMC] sdhci: print device id
As sdhci is a generic driver, it is helpful to see some more specific
identification of the actual hardware in dmesg.  PCI vendor, device and
revision is sufficient in most cases.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:02:01 +01:00
Pierre Ossman
8ef1a14379 [MMC] sdhci: check SDHCI base clock
A base clock value of 0 means that the driver must get the base clock through
some other means.  As we have no other way of getting it, we must abort.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:01:59 +01:00
Benjamin Herrenschmidt
d63fb6c55f [PATCH] powermac: Fix some 64b resource damage
The 64 bits resource patches did a bit of damage on PowerMac causing a
buffer overflow in macio_asic and a warning in a sound driver. The
former is fixed by reverting the sprintf of the bus_id to %08x as it was
before. The bus_id used for macio devices is always a 32 bits value
(macio always sits in 32 bits space) and since it's exposed to userland,
the format of the string shouldn't be changed like that anyway. The
second by using the proper type for printk.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 20:11:56 -07:00
Thomas Gleixner
ff632054ce [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes
Patch from Thomas Gleixner

From: Thomas Gleixner <tglx@linutronix.de>

Include the generic header file instead of the ARM specific one.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 22:32:16 +01:00
Thomas Gleixner
e6e3c3be8a [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes
Patch from Thomas Gleixner

From: Thomas Gleixner <tglx@linutronix.de>

Include the generic header file instead of the ARM specific one.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 22:32:15 +01:00
Len Brown
309b0f125a Pull smart-battery into release branch 2006-07-01 17:21:39 -04:00
Len Brown
d0e5f39f1e Pull bugzilla-3241 into release branch 2006-07-01 17:21:26 -04:00
Len Brown
361ea93cbf Pull asus_acpi-0.30 into release branch 2006-07-01 17:20:40 -04:00
Len Brown
5f765b8d68 Pull acpi_device_handle_cleanup into release branch 2006-07-01 17:19:34 -04:00
Len Brown
b197ba3c70 Pull acpi_os_free into release branch 2006-07-01 17:19:08 -04:00
Len Brown
635227ee89 ACPI: remove function tracing macros from drivers/acpi/*.c
a few invocations appeared due to the SBS and other patches.

Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-01 16:48:23 -04:00
Rich Townsend
3f86b83243 ACPI: add support for Smart Battery
Most batteries today are ACPI "Control Method" batteries,
but some models ship with the older "Smart Battery"
that requires this code.

Rich Townsend and Bruno Ducrot were the original authors.
Vladimir Lebedev updated to run on latest kernel.

http://bugzilla.kernel.org/show_bug.cgi?id=3734

Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-01 16:36:14 -04:00
Karol Kozimor
9becf5b91e ACPI: asus_acpi: correct M6N/M6R display nodes
This patch switches back the display nodes for M6R and M6N -- this happened
a while ago when a patch was misapplied (only the in-tree version was
affected).

Signed-off-by: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-01 16:20:10 -04:00
Tony Lindgren
ce9c1a8388 [ARM] 3678/1: MMC: Make OMAP MMC work
Patch from Tony Lindgren

This patch makes OMAP MMC work again:

- Fix compile errors
- Do not ioremap base as it is already statically mapped
- Clean-up platform device handling
- Fix compile warnings

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 19:56:44 +01:00
Andrew Morton
0cadaf45bd [PATCH] pnp: suppress request_irq() warning
Suppress the "setup_irq: irq handler mismatch" coming out of pnp_check_irq():
failures are expected here.

Cc: <stable@kernel.org>
Cc: Santiago Garcia Mantinan <manty@manty.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:04 -07:00
Ingo van Lil
9c7a41691f [PATCH] drivers/block/nbd.c compile fix
The Network Block Device driver doesn't compile if NDEBUG is defined.

Signed-off-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:04 -07:00
Alan Cox
faab17ba06 [PATCH] Fix problem with ATAPI DMA on IT8212 in Linux
Missing variable initialisation would mean it would sometimes not put ATAPI
devices into DMA by default.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: <Jack.Lee@ite.com.tw>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:04 -07:00
Ben Dooks
1add6781c8 [PATCH] RTC: class driver for Samsung S3C series SoC
This is a renamed and tested version of the previous S3C24XX RTC class
driver.

The driver has been renamed from the original s3c2410-rtc, which is now too
narrow for the range of devices supported.

The rtc-s3c has been chosen as there is the distinct possibility of this
driver being carried forward into newer Samsung SoC silicon.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:03 -07:00
Bryan O'Sullivan
27b678dd04 [PATCH] IB/ipath: namespace cleanup: replace ips with ipath
Remove ips namespace from infinipath drivers.  This renames ips_common.h to
ipath_common.h.  Definitions, data structures, etc.  that were not used by
kernel modules have moved to user-only headers.  All names including ips have
been renamed to ipath.  Some names have had an ipath prefix added.

Signed-off-by: Christian Bell <christian.bell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:02 -07:00
Bryan O'Sullivan
357b552ff3 [PATCH] IB/ipath: ignore receive queue size if SRQ is specified
The receive work queue size should be ignored if the QP is created to use a
shared receive queue according to the IB spec.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:02 -07:00
Bryan O'Sullivan
3e0018bc74 [PATCH] IB/ipath: remove some #if 0 code related to lockable memory
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:01 -07:00
Bryan O'Sullivan
35783ec07c [PATCH] IB/ipath: fix a bug that results in addresses near 0 being written via DMA
We can't tell for sure if any packets are in the infinipath receive buffer
when we shut down a chip port.  Normally this is taken care of by orderly
shutdown, but when processes are terminated, or sending process has a bug, we
can continue to receive packets.  So rather than writing zero to the address
registers for the closing port, we point it at a dummy memory.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:01 -07:00
Bryan O'Sullivan
6d8e9dd050 [PATCH] IB/ipath: read/write correct sizes through diag interface
We must increment uaddr by size we are reading or writing, since it's passed
as a char *, not a pointer to the appropriate size.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:01 -07:00
Bryan O'Sullivan
8307c28eec [PATCH] IB/ipath: support more models of InfiniPath hardware
We do a few more explicit checks for specific models, and now also support the
old PathScale serial number style, or new QLogic style.

This is backwards compatible with previous versions of software and hardware.
That is, older software will see a plausible serial number and correct GUID
when used with a new board, while newer software will correctly handle an
older board.

Signed-off-by: Mike Albaugh <mike.albaugh@qlogic.com>
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:01 -07:00
Bryan O'Sullivan
46bbeac922 [PATCH] IB/ipath: drop the "stats" sysfs attribute group
This attribute group made it into the original driver, but should not have.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:01 -07:00
Bryan O'Sullivan
1eb68b990a [PATCH] IB/ipath: purge sps_lid and sps_mlid arrays
The two arrays only had space for 4 units.

Also changed from ipath_set_sps_lid() to ipath_set_lid(); the sps was
leftover.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:01 -07:00
Bryan O'Sullivan
12eef41f8b [PATCH] IB/ipath: rC receive interrupt performance changes
This patch separates QP state used for sending and receiving RC packets so the
processing in the receive interrupt handler can be done mostly without locks
being held.  ACK packets are now sent without requiring synchronization with
the send tasklet.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:01 -07:00
Bryan O'Sullivan
fba75200ad [PATCH] IB/ipath: fixes to performance get counters for IB compliance
This patch fixes some problems uncovered during IB compliance testing to
return the right values for error counters returned by the Performance Get
Counters packet.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:01 -07:00
Bryan O'Sullivan
85322947d7 [PATCH] IB/ipath: check for valid LID and multicast LIDs
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:01 -07:00
Bryan O'Sullivan
7cd658cd2b [PATCH] IB/ipath: removed redundant statements
The tail register read became redundant as the result of earlier receive
interrupt bug fixes.

Drop another unneeded register read.

And another line that got duplicated.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:00 -07:00
Bryan O'Sullivan
c100f622fd [PATCH] IB/ipath: don't confuse the max message size with the MTU
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:00 -07:00
Bryan O'Sullivan
4faba98a1a [PATCH] IB/ipath: disallow send of invalid packet sizes over UD
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:00 -07:00
Bryan O'Sullivan
57abad25f8 [PATCH] IB/ipath: fix lost interrupts on HT-400
Do an extra check to see if in-memory tail changed while processing packets,
and if so, going back through the loop again (but only once per call to
ipath_kreceive()).  In practice, this seems to be enough to guarantee that if
we crossed the clearing of an interrupt at start of ipath_intr with a
scheduled tail register update, that we'll process the "extra" packet that
lost the interrupt because we cleared it just as it was about to arrive.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:00 -07:00
Bryan O'Sullivan
f5f99929ac [PATCH] IB/ipath: fixed bug 9776 for real
The problem was that I was updating the head register multiple times in the
rcvhdrq processing loop, and setting the counter on each update.  Since that
meant that the tail register was ahead of head for all but the last update, we
would get extra interrupts.  The fix was to not write the counter value except
on the last update.

I also changed to update rcvhdrhead and rcvegrindexhead at most every 16
packets, if there were lots of packets in the queue (and of course, on the
last packet, regardless).

I also made some small cleanups while debugging this.

With these changes, xeon/monty typically sees two openib packets per interrupt
on sdp and ipoib, opteron/monty is about 1.25 pkts/intr.

I'm seeing about 3800 Mbit/s monty/xeon, and 5000-5100 opteron/monty with
netperf sdp.  Netpipe doesn't show as good as that, peaking at about 4400 on
opteron/monty sdp.  Plain ipoib xeon is about 2100+ netperf, opteron 2900+, at
128KB

Signed-off-by: olson@eng-12.pathscale.com
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:00 -07:00
Bryan O'Sullivan
13aef4942c [PATCH] IB/ipath: reduce overhead on receive interrupts
Also count the number of interrupts where that works (fastrcvint).  On any
interrupt where the port0 head and tail registers are not equal, just call the
ipath_kreceive code without reading the interrupt status, thus saving the
approximately 0.25usec processor stall waiting for the read to return.  If any
other interrupt bits are set, or head==tail, take the normal path, but that
has been reordered to handle read ahead of pioavail.  Also no longer call
ipath_kreceive() from ipath_qcheck(), because that just seems to make things
worse, and isn't really buying us anything, these days.

Also no longer loop in ipath_kreceive(); better to not hold things off too
long (I saw many cases where we would loop 4-8 times, and handle thousands (up
to 3500) in a single call).

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:00 -07:00
Bryan O'Sullivan
f37bda9246 [PATCH] IB/ipath: memory management cleanups
Made in-memory rcvhdrq tail update be in dma_alloc'ed memory, not random user
or special kernel (needed for ppc, also "just the right thing to do").

Some cleanups to make unexpected link transitions less likely to produce
complaints about packet errors, and also to not leave SMA packets stuck and
unable to go out.

A few other random debug and comment cleanups.

Always init rcvhdrq head/tail registers to 0, to avoid race conditions (should
have been that way some time ago).

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:00 -07:00
Bryan O'Sullivan
06993ca6bc [PATCH] IB/ipath: use vmalloc to allocate struct ipath_devdata
This is not a DMA target, so no need to use dma_alloc_coherent on it.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:00 -07:00
Bryan O'Sullivan
0ed9a4a0b6 [PATCH] IB/ipath: use more appropriate gfp flags
This helps us to survive better when memory is fragmented.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:00 -07:00
Bryan O'Sullivan
a40f55fc33 [PATCH] IB/ipath: enable freeze mode when shutting down device
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:59 -07:00
Bryan O'Sullivan
b1d8865a20 [PATCH] IB/ipath: print better debug info when handling 32/64-bit DMA mask problems
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:59 -07:00
Bryan O'Sullivan
b35f004dd3 [PATCH] IB/ipath: removed unused field ipath_kregvirt from struct ipath_devdata
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:59 -07:00
Bryan O'Sullivan
fe62546a6a [PATCH] IB/ipath: enforce device resource limits
These limits are somewhat artificial in that we don't actually have any
device limits.  However, the verbs layer expects that such limits exist
and are enforced, so we make up arbitrary (but sensible) limits.

Signed-off-by: Robert Walsh <robert.walsh@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:59 -07:00
Bryan O'Sullivan
e8a88f09f2 [PATCH] IB/ipath: report correct device identification information in /sys
Signed-off-by: Robert Walsh <robert.walsh@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:59 -07:00
Bryan O'Sullivan
9edbd990bb [PATCH] IB/ipath: return an error for unknown multicast GID
Signed-off-by: Robert Walsh <robert.walsh@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:59 -07:00
Bryan O'Sullivan
60460dfd42 [PATCH] IB/ipath: fix some memory leaks on failure paths
Signed-off-by: Robert Walsh <robert.walsh@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:59 -07:00
Bryan O'Sullivan
4a45b7d4ec [PATCH] IB/ipath: don't allow resources to be created with illegal values
Signed-off-by: Robert Walsh <robert.walsh@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:59 -07:00
Bryan O'Sullivan
6665ddee85 [PATCH] IB/ipath: remove some duplicate code
Signed-off-by: Robert Walsh <robert.walsh@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:59 -07:00
Bryan O'Sullivan
685f97e81b [PATCH] IB/ipath: update some comments and fix typos
Signed-off-by: Robert Walsh <robert.walsh@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:59 -07:00
Bryan O'Sullivan
a2acb2ff36 [PATCH] IB/ipath: allow diags on any unit
There is no longer a /dev/ipath_diag file; instead, there's
/dev/ipath_diag0, 1, etc.

It's still not possible to have diags run on more than one unit at a time,
but that's easy to fix at some point.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:58 -07:00
Bryan O'Sullivan
6700efdfc0 [PATCH] IB/ipath: fix shared receive queues for RC
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:58 -07:00
Bryan O'Sullivan
7bbb15ea85 [PATCH] IB/ipath: fix an indenting problem
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:58 -07:00
Bryan O'Sullivan
ddd4bb2210 [PATCH] IB/ipath: share more common code between RC and UC protocols
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:58 -07:00
Bryan O'Sullivan
759d57686d [PATCH] IB/ipath: update copyrights and other strings to reflect new company name
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:58 -07:00
Bryan O'Sullivan
443a64abbc [PATCH] IB/ipath: name zero counter offsets so it's clear they aren't counters
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:58 -07:00
Jae-hyeon Park
345a6e6aea [PATCH] ACPI: fix not power-manageable device message
Fix typo in message.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:58 -07:00
Doug Thompson
929a40ec32 [PATCH] EDAC: fix module names quoted in sysfs
Fix the quoted module name in the sysfs for EDAC modules and reported by several
people.

Instead of  ../_edac_e752x_/   now the following will be presented, like other
modules:   ../edac_e752x/

Signed-off-by: Doug Thompson <norsk5@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:58 -07:00
Vladimir Lebedev
9fdae72764 ACPI: handle battery notify event on broken BIOS
http://bugzilla.kernel.org/show_bug.cgi?id=3241

Signed-off-by: Vladimir Lebedev <vladimir.p.lebedev@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-01 12:13:49 -04:00
Christian Lupien
03d782524e ACPI: handle AC notify event on broken BIOS
http://bugzilla.kernel.org/show_bug.cgi?id=3241

updated by Vladimir Lebedev

Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-01 12:09:27 -04:00
Len Brown
37672d4c52 Pull asus_acpi-0.30 into release branch 2006-07-01 11:06:01 -04:00
Len Brown
b2f71bade4 Pull acpi_device_handle_cleanup into release branch 2006-07-01 11:05:19 -04:00
Randy Dunlap
f58f8313a6 [SCSI] qla1280: fix section mismatch warnings
Fix section mismatch warnings:
WARNING: drivers/scsi/qla1280.o - Section mismatch: reference to
.init.data: from .text between 'qla1280_get_token' (at offset 0x2a16)
and 'qla1280_probe_one'
WARNING: drivers/scsi/qla1280.o - Section mismatch: reference to
.init.data: from .text between 'qla1280_get_token' (at offset 0x2a3c)
and 'qla1280_probe_one'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:56:22 -05:00
James Bottomley
2686de27a3 [SCSI] mptsas: eliminate ghost devices
One of the current problems the mptsas driver has is that of "ghost"
devices (these are devices the firmware reports as existing, but what
they actually represent are the parents of a lower device), so for
example in my dual expander configuration, three expanders actually show
up, two for the real expanders but a third is created because the
firmware reports that the lower expander also has another expander
connected (which is simply the port going back to the upper expander).

The attached patch eliminates all these ghosts by not allocating any
devices for them if the SAS address is the SAS address of the parent.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:35:17 -05:00
Adrian Bunk
413975a0f1 [SCSI] qla2xxx: make some more functions static
Make some needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:34:18 -05:00
Jesper Juhl
900d9f9873 [SCSI] small whitespace cleanup for qlogic driver
Add a few spaces to MODULE_PARM_DESC() text for qla2xxx. Without these
spaces text runs together when modinfo prints the text.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:30:01 -05:00
Eric Moore
3e00a5b287 [SCSI] mptbase: mpt_interrupt should return IRQ_NONE
The way mpt_interrupt() was coded, it was impossible for the unhandled
interrupt detection logic to ever trigger. All interrupt handlers should
return IRQ_NONE when they have nothing to do.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:29:23 -05:00
Eric Moore
376ac83078 [SCSI] mptsas: make two functions static
Make two needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:29:00 -05:00
Ishai Rabinovitz
454e8957eb [SCSI] sg.c: Fix bad error handling in
I got a NULL derefrence in cdev_del+1 when called from sg_remove. By looking at
the code of sg_add, sg_alloc and sg_remove (all in drivers/scsi/sg.c) I found
out that sg_add is calling sg_alloc but if it fails afterwards it does not
deallocate the space that was allocated in sg_alloc and the redundant entry has
NULL in cdev. When sg_remove is being called, it tries to perform cdev_del to
this NULL cdev and fails.

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:28:35 -05:00
Karol Kozimor
2df8386cec ACPI: asus_acpi: add S1N WLED control
This patch switches back the display nodes for M6R and M6N -- this happened
a while ago when a patch was misapplied (only the in-tree version was
affected).

Signed-off-by: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 20:38:10 -04:00
Karol Kozimor
96d1142084 ACPI: asus_acpi: add S1N WLED control
This small patch adds back WLED control for S1N models, this was
accidentally removed a while ago.

Signed-off-by: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 20:38:02 -04:00
Karol Kozimor
ffab0d9507 ACPI: asus_acpi: rework model detection
This patch reworks laptop model detection.

This addresses the Samsung P30 issue, where the INIT method would return no
object, but the implicit return in the AML interpreter would confuse the
driver. It also accounts for a newer batch of Asus models whose INIT
returns ACPI_TYPE_BUFFER instead of STRING.

The handling is now much leaner, if we get a buffer or a string, we check
against known values, in every other case we use a different path
(currently DSDT signatures). The bulk of this patch is separating the
string matching from asus_hotk_get_info() into a separate function.

This patch properly fixes http://bugme.osdl.org/show_bug.cgi?id=5067 and
http://bugme.osdl.org/show_bug.cgi?id=5092 and makes the driver fully
functional again with acpi=strict on all machines.

Signed-off-by: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 20:37:50 -04:00
Karol Kozimor
ebccb84810 ACPI: asus_acpi: support L5D
This patch adds support for Asus L5D and thus fixes
http://bugme.osdl.org/show_bug.cgi?id=4695

Signed-off-by: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 20:37:40 -04:00
Karol Kozimor
e067aaa761 ACPI: asus_acpi: handle internal Bluetooth / support W5A
This patch creates a new file named "bluetooth" under /proc/acpi/asus/.
This file controls both the internal Bluetooth adapter's presence on the
USB bus and the associated LED.

echo 1 > /proc/acpi/asus/bluetooth to enable, 0 to disable.

Additionally, the patch add support for Asus W5A, the first model that uses
this feature.

Patch originally by Fernando A. P. Gomes.

Signed-off-by: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 20:37:27 -04:00
Karol Kozimor
f78c589d10 ACPI: asus_acpi: support A4G
This patch adds support for Asus A4G.
Originally by Giuseppe Rota.

Signed-off-by: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 20:35:12 -04:00
Karol Kozimor
c067a78997 ACPI: asus_acpi: support W3400N
This patch adds support for Asus W3400N.

Signed-off-by: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 20:35:01 -04:00
Karol Kozimor
42cb891295 ACPI: asus_acpi: LED display support
This patch adds handling for front LED displays found on W1N and the like.
Additionally, W1N is given its own model_data instance.

Patch originally by Éric Burghard.

Signed-off-by: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 20:34:06 -04:00
Karol Kozimor
ed2cb07b2b ACPI: asus_acpi: support A3G
This patch adds support for Asus A3G.

Signed-off-by: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 20:33:02 -04:00
Karol Kozimor
a170a5317c ACPI: asus_acpi: misc cleanups
This patch updates the version string, copyright notices and does
whitespace cleanup (it looks weird, blame Lindent).

Signed-off-by: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 20:32:55 -04:00
Len Brown
ba290ab7da Pull kmalloc into release branch 2006-06-30 20:07:01 -04:00
Linus Torvalds
9262e9149f Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Kill sun4v virtual device layer.
  [SERIAL] sunhv: Convert to of_driver layer.
  [SPARC64]: Mask out top 8-bits in physical address when building resources.
  [SERIAL] sunsu: Missing return statement in su_probe().
2006-06-30 15:40:35 -07:00
Linus Torvalds
e37a72de84 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPV6]: Added GSO support for TCPv6
  [NET]: Generalise TSO-specific bits from skb_setup_caps
  [IPV6]: Added GSO support for TCPv6
  [IPV6]: Remove redundant length check on input
  [NETFILTER]: SCTP conntrack: fix crash triggered by packet without chunks
  [TG3]: Update version and reldate
  [TG3]: Add TSO workaround using GSO
  [TG3]: Turn on hw fix for ASF problems
  [TG3]: Add rx BD workaround
  [TG3]: Add tg3_netif_stop() in vlan functions
  [TCP]: Reset gso_segs if packet is dodgy
2006-06-30 15:40:17 -07:00
Linus Torvalds
93fdf10d4c Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/core: Set alternate port number when initializing QP attributes
  IB/uverbs: Set correct user handle for user SRQs
2006-06-30 15:39:49 -07:00
Linus Torvalds
22a3e233ca Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  Remove obsolete #include <linux/config.h>
  remove obsolete swsusp_encrypt
  arch/arm26/Kconfig typos
  Documentation/IPMI typos
  Kconfig: Typos in net/sched/Kconfig
  v9fs: do not include linux/version.h
  Documentation/DocBook/mtdnand.tmpl: typo fixes
  typo fixes: specfic -> specific
  typo fixes in Documentation/networking/pktgen.txt
  typo fixes: occuring -> occurring
  typo fixes: infomation -> information
  typo fixes: disadvantadge -> disadvantage
  typo fixes: aquire -> acquire
  typo fixes: mecanism -> mechanism
  typo fixes: bandwith -> bandwidth
  fix a typo in the RTC_CLASS help text
  smb is no longer maintained

Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30 15:39:30 -07:00
Linus Torvalds
39302175c2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6/
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6/:
  [PATCH] pcmcia: fix deadlock in pcmcia_parse_events
  [PATCH] com20020_cs: more device support
  [PATCH] au1xxx: pcmcia: fix __init called from non-init
  [PATCH] kill open-coded offsetof in cm4000_cs.c ZERO_DEV()
  [PATCH] pcmcia: convert pcmcia_cs to kthread
  [PATCH] pcmcia: fix kernel-doc function name
  [PATCH] pcmcia: hostap_cs.c - 0xc00f,0x0000 conflicts with pcnet_cs
  [PATCH] pcmcia: at91_cf suspend/resume/wakeup
  [PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available
  [PATCH] pcmcia: TI PCIxx12 CardBus controller support
  [PATCH] pcmcia: warn if driver requests exclusive, but gets a shared IRQ
  [PATCH] pcmcia: expose tool in pcmcia/Documentation/pcmcia/
  [PATCH] pcmcia: another ID for serial_cs.c
  [PATCH] yenta: fix hidden PCI bus numbers
  [PATCH] yenta: do power-up only after socket is configured
2006-06-30 15:36:52 -07:00
Linus Torvalds
1cfef5ed63 Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (4290): Add support for the TCL M2523_3DB_E tuner.
  V4L/DVB (4289): Missing statement in drivers/media/dvb/frontends/cx22700.c
  V4L/DVB (4288): Clean out a zillion sparse warnings in pvrusb2
  V4L/DVB (4287): Pvrusb2/: possible cleanups
  V4L/DVB (4285): Cx88: add support for Geniatech Digistar / Digiwave 103g
  V4L/DVB (4284): Cx24123: fix set_voltage function according to the specs
  V4L/DVB (4282): Fix: use swzigzag for swalgo
  V4L/DVB (4281): TDA9887_SET_CONFIG should only be handled by the tda9887.
  V4L/DVB (4277): Fix CI interface on PRO KNC1 cards
  V4L/DVB (4276): Fix CI on old KNC1 DVBC cards
  V4L/DVB (4275): The FE_SET_FRONTEND_TUNE_MODE ioctl always returns EOPNOTSUPP
  V4L/DVB (4274): Eliminate use of tda9887 from pvrusb2 driver
  V4L/DVB (4273): Always log pvrusb2 device register / unregister events
  V4L/DVB (4272): Fix tveeprom supported standards
  V4L/DVB (4270): Add tda9887-specific tuner configuration
  V4L/DVB (4269): Subject: videocodec: make 1-bit fields unsigned
  V4L/DVB (4267): Remove all instances of request_module("tda9887")
  V4L/DVB (4264): Cx88-blackbird: implement VIDIOC_QUERYCTRL and VIDIOC_QUERYMENU
2006-06-30 15:36:19 -07:00
Linus Torvalds
3e8d6ad9bf Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (25 commits)
  ACPI: Kconfig: ACPI_SRAT depends on ACPI
  ACPI: drivers/acpi/scan.c: make acpi_bus_type static
  ACPI: fixup memhotplug debug message
  ACPI: ACPICA 20060623
  ACPI: C-States: only demote on current bus mastering activity
  ACPI: C-States: bm_activity improvements
  ACPI: C-States: accounting of sleep states
  ACPI: additional blacklist entry for ThinkPad R40e
  ACPI: restore comment justifying 'extra' P_LVLx access
  ACPI: fix battery on HP NX6125
  ACPIPHP: prevent duplicate slot numbers when no _SUN
  ACPI: static-ize handle_hotplug_event_func()
  ACPIPHP: use ACPI dock driver
  ACPI: dock driver
  KEVENT: add new uevent for dock
  ACPI: asus_acpi_init: propagate correct return value
  [ACPI] Print error message if remove/install notify handler fails
  ACPI: delete tracing macros from drivers/acpi/*.c
  ACPI: HW P-state coordination support
  ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...)
  ...
2006-06-30 15:34:15 -07:00
David S. Miller
93872ba21d [SERIAL] sunhv: Convert to of_driver layer.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:13:38 -07:00
David S. Miller
a1d22d3258 [SERIAL] sunsu: Missing return statement in su_probe().
If we have a keyboard/mouse port, don't drop through to
calling sunsu_autoconfig().

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:13:34 -07:00
Herbert Xu
f83ef8c0b5 [IPV6]: Added GSO support for TCPv6
This patch adds GSO support for IPv6 and TCPv6.  This is based on a patch
by Ananda Raju <Ananda.Raju@neterion.com>.  His original description is:

	This patch enables TSO over IPv6. Currently Linux network stacks
	restricts TSO over IPv6 by clearing of the NETIF_F_TSO bit from
	"dev->features". This patch will remove this restriction.

	This patch will introduce a new flag NETIF_F_TSO6 which will be used
	to check whether device supports TSO over IPv6. If device support TSO
	over IPv6 then we don't clear of NETIF_F_TSO and which will make the
	TCP layer to create TSO packets. Any device supporting TSO over IPv6
	will set NETIF_F_TSO6 flag in "dev->features" along with NETIF_F_TSO.

	In case when user disables TSO using ethtool, NETIF_F_TSO will get
	cleared from "dev->features". So even if we have NETIF_F_TSO6 we don't
	get TSO packets created by TCP layer.

	SKB_GSO_TCPV4 renamed to SKB_GSO_TCP to make it generic GSO packet.
	SKB_GSO_UDPV4 renamed to SKB_GSO_UDP as UFO is not a IPv4 feature.
	UFO is supported over IPv6 also

	The following table shows there is significant improvement in
	throughput with normal frames and CPU usage for both normal and jumbo.

	--------------------------------------------------
	|          |     1500        |      9600         |
	|          ------------------|-------------------|
	|          | thru     CPU    |  thru     CPU     |
	--------------------------------------------------
	| TSO OFF  | 2.00   5.5% id  |  5.66   20.0% id  |
	--------------------------------------------------
	| TSO ON   | 2.63   78.0 id  |  5.67   39.0% id  |
	--------------------------------------------------

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:12:10 -07:00
Michael Chan
2c6059bca8 [TG3]: Update version and reldate
Update version to 3.61.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:11:59 -07:00
Michael Chan
52c0fd834e [TG3]: Add TSO workaround using GSO
Use GSO to workaround a rare TSO bug on some chips.  This hardware
bug may be triggered when the TSO header size is greater than 80
bytes.  When this condition is detected in a TSO packet, the driver
will use GSO to segment the packet to workaround the hardware bug.

Thanks to Juergen Kreileder <jk@blackdown.de> for reporting the
problem and collecting traces to help debug the problem.

And thanks to Herbert Xu <herbert@gondor.apana.org.au> for providing
the GSO mechanism that happens to be the perfect workaround for this
problem.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:11:57 -07:00
Michael Chan
1661394e78 [TG3]: Turn on hw fix for ASF problems
Clear a bit to enable a hardware fix for some ASF related problem.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:11:55 -07:00
Michael Chan
f92905deb9 [TG3]: Add rx BD workaround
Add workaround to limit the burst size of rx BDs being DMA'ed to the
chip.  This works around hardware errata on a number of 5750, 5752,
and 5755 chips.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:11:52 -07:00
Michael Chan
29315e8770 [TG3]: Add tg3_netif_stop() in vlan functions
Add tg3_netif_stop() when changing the vlgrp (vlan group) pointer. It
is necessary to quiesce the device before changing that pointer.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:11:50 -07:00
Sean Hefty
0d8fdfd71b IB/core: Set alternate port number when initializing QP attributes
Set alternate port number when initializing QP attributes.  This bug
is OpenFabrics bugzilla bug #160.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-30 14:10:14 -07:00
Roland Dreier
146d26b2bf IB/uverbs: Set correct user handle for user SRQs
Store away the user handle passed in from userspace when creating an
SRQ, so that the kernel can return the correct handle when an SRQ
asynchronous event occurs.  (A 0 was incorrectly stored as the user
handle as part of the changes in 9ead190b, "IB/uverbs: Don't serialize
with ib_uverbs_idr_mutex")

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-30 13:40:13 -07:00