Commit graph

423 commits

Author SHA1 Message Date
Avi Kivity
796fd1b23e KVM: VMX: Remove unnecessary code in vmx_tlb_flush()
A vmexit implicitly flushes the tlb; the code is bogus.

Noted by Shaohua Li.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:49 +03:00
Shaohua Li
88a97f0b2f KVM: MMU: Fix Wrong tlb flush order
Need to flush the tlb after updating a pte, not before.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Avi Kivity
75880a0112 KVM: VMX: Reinitialize the real-mode tss when entering real mode
Protected mode code may have corrupted the real-mode tss, so re-initialize
it when switching to real mode.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Luca Tettamanti
a3c870bdce KVM: Avoid useless memory write when possible
When writing to normal memory and the memory area is unchanged the write
can be safely skipped, avoiding the costly kvm_mmu_pte_write.

Signed-Off-By: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Luca Tettamanti
02c03a326a KVM: Fix x86 emulator writeback
When the old value and new one are the same the emulator skips the
write; this is undesirable when the destination is a MMIO area and the
write shall be performed regardless of the previous value. This
optimization breaks e.g. a Linux guest APIC compiled without
X86_GOOD_APIC.

Remove the check and perform the writeback stage in the emulation unless
it's explicitly disabled (currently push and some 2 bytes instructions
may disable the writeback).

Signed-Off-By: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Eddie Dong
74906345ff KVM: Add support for in-kernel pio handlers
Useful for the PIC and PIT.

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Gregory Haskins
ff1dc7942b KVM: VMX: Fix interrupt checking on lightweight exit
With kernel-injected interrupts, we need to check for interrupts on
lightweight exits too.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Gregory Haskins
2eeb2e94eb KVM: Adds support for in-kernel mmio handlers
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Nitin A Kamble
d9413cd757 KVM: Implement emulation of instruction "ret" (opcode 0xc3)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Nitin A Kamble
7f0aaee07b KVM: Implement emulation of "pop reg" instruction (opcode 0x58-0x5f)
For use in real mode.

Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Avi Kivity
7700270ee3 KVM: VMX: Ensure vcpu time stamp counter is monotonous
If the time stamp counter goes backwards, a guest delay loop can become
infinite.  This can happen if a vcpu is migrated to another cpu, where
the counter has a lower value than the first cpu.

Since we're doing an IPI to the first cpu anyway, we can use that to pick
up the old tsc, and use that to calculate the adjustment we need to make
to the tsc offset.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Avi Kivity
94cea1bb9d KVM: Initialize the BSP bit in the APIC_BASE msr correctly
Needs to be set on vcpu 0 only.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Shani Moideen
a3870c4789 KVM: VMX: Replace memset(<addr>, 0, PAGESIZE) with clear_page(<addr>)
Signed-off-by: Shani Moideen <shani.moideen@wipro.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Shani Moideen
129ee910df KVM: SVM: Replace memset(<addr>, 0, PAGESIZE) with clear_page(<addr>)
Signed-off-by: Shani Moideen <shani.moideen@wipro.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
d9e368d612 KVM: Flush remote tlbs when reducing shadow pte permissions
When a vcpu causes a shadow tlb entry to have reduced permissions, it
must also clear the tlb on remote vcpus.  We do that by:

- setting a bit on the vcpu that requests a tlb flush before the next entry
- if the vcpu is currently executing, we send an ipi to make sure it
  exits before we continue

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
39c3b86e5c KVM: Keep an upper bound of initialized vcpus
That way, we don't need to loop for KVM_MAX_VCPUS for a single vcpu
vm.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
72d6e5a08a KVM: Emulate hlt on real mode for Intel
This has two use cases: the bios can't boot from disk, and guest smp
bootstrap.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
d3bef15f84 KVM: Move duplicate halt handling code into kvm_main.c
Will soon have a thid user.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
ef9254df0b KVM: Enable guest smp
As we don't support guest tlb shootdown yet, this is only reliable
for real-mode guests.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
120e9a453b KVM: Fix adding an smp virtual machine to the vm list
If we add the vm once per vcpu, we corrupt the list if the guest has
multiple vcpus.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Avi Kivity
7b53aa5650 KVM: Fix vcpu freeing for guest smp
A vcpu can pin up to four mmu shadow pages, which means the freeing
loop will never terminate.  Fix by first unpinning shadow pages on
all vcpus, then freeing shadow pages.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Nguyen Anh Quynh
313899477f KVM: Remove unnecessary initialization and checks in mark_page_dirty()
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Robert P. J. Day
50a3485c59 KVM: Replace C code with call to ARRAY_SIZE() macro.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Avi Kivity
17c3ba9d37 KVM: Lazy guest cr3 switching
Switch guest paging context may require us to allocate memory, which
might fail.  Instead of wiring up error paths everywhere, make context
switching lazy and actually do the switch before the next guest entry,
where we can return an error if allocation fails.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Avi Kivity
bd2b2baa5c KVM: MMU: Remove unused large page marker
This has not been used for some time, as the same information is available
in the page header.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Avi Kivity
b64b3763a5 KVM: MMU: Don't cache guest access bits in the shadow page table
This was once used to avoid accessing the guest pte when upgrading
the shadow pte from read-only to read-write.  But usually we need
to set the guest pte dirty or accessed bits anyway, so this wasn't
really exploited.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
fd97dc516c KVM: MMU: Simpify accessed/dirty/present/nx bit handling
Always set the accessed and dirty bit (since having them cleared causes
a read-modify-write cycle), always set the present bit, and copy the
nx bit from the guest.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
4436d46621 KVM: MMU: Remove cr0.wp tricks
No longer needed as we do everything in one place.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
e663ee64ae KVM: MMU: Make setting shadow ptes atomic on i386
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
0d551bb698 KVM: Make shadow pte updates atomic
With guest smp, a second vcpu might see partial updates when the first
vcpu services a page fault.  So delay all updates until we have figured
out what the pte should look like.

Note that on i386, this is still not completely atomic as a 64-bit write
will be split into two on a 32-bit machine.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
a18de5a403 KVM: Move shadow pte modifications from set_pte/set_pde to set_pde_common()
We want all shadow pte modifications in one place.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
97a0a01ea9 KVM: MMU: Fold fix_write_pf() into set_pte_common()
This prevents some work from being performed twice, and, more importantly,
reduces the number of places where we modify shadow ptes.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Avi Kivity
63b1ad24d2 KVM: MMU: Fold fix_read_pf() into set_pte_common()
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Avi Kivity
6598c8b242 KVM: MMU: Pass the guest pde to set_pte_common
We will need the accessed bit (in addition to the dirty bit) and
also write access (for setting the dirty bit) in a future patch.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Avi Kivity
e60d75ea29 KVM: MMU: Move set_pte_common() to pte width dependent code
In preparation of some modifications.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Avi Kivity
ef0197e8d9 KVM: MMU: Simplify fetch() a little bit
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Avi Kivity
d3d25b048b KVM: MMU: Use slab caches for shadow pages and their headers
Use slab caches instead of a simple custom list.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Eddie Dong
8d7282036f KVM: Use symbolic constants instead of magic numbers
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Markus Rechberger
06ff0d3728 KVM: Fix includes
KVM compilation fails for some .configs.  This fixes it.

Signed-off-by: Markus Rechberger <markus.rechberger@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Avi Kivity
687fdbfe64 KVM: x86 emulator: implement wbinvd
Vista seems to trigger it.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Jan Engelhardt
de062065a5 Use menuconfig objects II - KVM/Virt
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
so that the user can disable all the options in that menu at once
instead of having to disable each option separately.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Eddie Dong
2cc51560ae KVM: VMX: Avoid saving and restoring msr_efer on lightweight vmexit
MSR_EFER.LME/LMA bits are automatically save/restored by VMX
hardware, KVM only needs to save NX/SCE bits at time of heavy
weight VM Exit. But clearing NX bits in host envirnment may
cause system hang if the host page table is using EXB bits,
thus we leave NX bits as it is. If Host NX=1 and guest NX=0, we
can do guest page table EXB bits check before inserting a shadow
pte (though no guest is expecting to see this kind of gp fault).
If host NX=0, we present guest no Execute-Disable feature to guest,
thus no host NX=0, guest NX=1 combination.

This patch reduces raw vmexit time by ~27%.

Me: fix compile warnings on i386.

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Eddie Dong
f2be4dd654 KVM: VMX: Cleanup redundant code in MSR set
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Eddie Dong
a75beee6e4 KVM: VMX: Avoid saving and restoring msrs on lightweight vmexit
In a lightweight exit (where we exit and reenter the guest without
scheduling or exiting to userspace in between), we don't need various
msrs on the host, and avoiding shuffling them around reduces raw exit
time by 8%.

i386 compile fix by Daniel Hecken <dh@bahntechnik.de>.

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:41 +03:00
Nitin A Kamble
b3f37707b0 KVM: VMX: Handle #SS faults from real mode
Instructions with address size override prefix opcode 0x67
Cause the #SS fault with 0 error code in VM86 mode.  Forward
them to the emulator.

Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:41 +03:00
Avi Kivity
cd2276a795 KVM: VMX: Use local labels in inline assembly
This makes oprofile dumps and disassebly easier to read.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:41 +03:00
Avi Kivity
cd0536d7cb KVM: Fix vmx I/O bitmap initialization on highmem systems
kunmap() expects a struct page, not a virtual address.  Fixes an oops loading
kvm-intel.ko on i386 with CONFIG_HIGHMEM.

Thanks to Michael Ivanov <deruhu@peterstar.ru> for reporting.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:41 +03:00
Avi Kivity
653e3108b7 KVM: Avoid corrupting tr in real mode
The real mode tr needs to be set to a specific tss so that I/O
instructions can function.  Divert the new tr values to the real
mode save area from where they will be restored on transition to
protected mode.

This fixes some crashes on reboot when the bios accesses an I/O
instruction.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:41 +03:00
Avi Kivity
eff708bc2b KVM: VMX: Only reload guest msrs if they are already loaded
If we set an msr via an ioctl() instead of by handling a guest exit, we
have the host state loaded, so reloading the msrs would clobber host
state instead of guest state.

This fixes a host oops (and loss of a cpu) on a guest reboot.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:41 +03:00
Avi Kivity
47ad8e689b KVM: MMU: Store shadow page tables as kernel virtual addresses, not physical
Simpifies things a bit.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:40 +03:00
Avi Kivity
4b02d6daa1 KVM: MMU: Simplify kvm_mmu_free_page() a tiny bit
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:40 +03:00
Matthew Gregan
2dc7094b56 KVM: Implement IA32_EBL_CR_POWERON msr
Attempting to boot the default 'bsd' kernel of OpenBSD 4.1 i386 in a guest
fails early in the kernel init inside p3_get_bus_clock while trying to read
the IA32_EBL_CR_POWERON MSR.  KVM logs an 'unhandled MSR' message and the
guest kernel faults.

This patch is sufficient to allow OpenBSD to boot, after which it seems to
run fine.  I'm not sure if this is the correct solution for dealing with
this particular MSR, but it works for me.

Signed-off-by: Matthew Gregan <kinetik@flim.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:40 +03:00
Avi Kivity
a3a0636725 KVM: Set cr0.mp for guests
This allows fwait instructions to be trapped when the guest fpu is not
loaded.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:40 +03:00
Avi Kivity
5fd86fcfc0 KVM: Consolidate guest fpu activation and deactivation
Easier to keep track of where the fpu is this way.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:39 +03:00
Avi Kivity
abd3f2d622 KVM: Rationalize exception bitmap usage
Everyone owns a piece of the exception bitmap, but they happily write to
the entire thing like there's no tomorrow.  Centralize handling in
update_exception_bitmap() and have everyone call that.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:39 +03:00
Avi Kivity
707c087430 KVM: Move some more msr mangling into vmx_save_host_state()
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:39 +03:00
Avi Kivity
33ed632921 KVM: Fix potential guest state leak into host
The lightweight vmexit path avoids saving and reloading certain host
state.  However in certain cases lightweight vmexit handling can schedule()
which requires reloading the host state.

So we store the host state in the vcpu structure, and reloaded it if we
relinquish the vcpu.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:39 +03:00
Avi Kivity
7494c0ccbb KVM: Increase mmu shadow cache to 1024 pages
This improves kbuild times by about 10%, bringing it within a respectable
25% of native.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:39 +03:00
Avi Kivity
0028425f64 KVM: Update shadow pte on write to guest pte
A typical demand page/copy on write pattern is:

- page fault on vaddr
- kvm propagates fault to guest
- guest handles fault, updates pte
- kvm traps write, clears shadow pte, resumes guest
- guest returns to userspace, re-faults on same vaddr
- kvm installs shadow pte, resumes guest
- guest continues

So, three vmexits for a single guest page fault.  But if instead of clearing
the page table entry, we update to correspond to the value that the guest
has just written, we eliminate the third vmexit.

This patch does exactly that, reducing kbuild time by about 10%.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:39 +03:00
Avi Kivity
fce0657ff9 KVM: MMU: Respect nonpae pagetable quadrant when zapping ptes
When a guest writes to a page that has an mmu shadow, we have to clear
the shadow pte corresponding to the memory location touched by the guest.

Now, in nonpae mode, a single guest page may have two or four shadow
pages (because a nonpae page maps 4MB or 4GB, whereas the pae shadow maps
2MB or 1GB), so we when we look up the page we find up to three additional
aliases for the page.  Since we _clear_ the shadow pte, it doesn't matter
except for a slight performance penalty, but if we want to _update_ the
shadow pte instead of clearing it, it is vital that we don't modify the
aliases.

Fortunately, exactly which page is needed (the "quadrant") is easily
computed, and is accessible in the shadow page header.  All we need is
to ignore shadow pages from the wrong quadrants.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:39 +03:00
Avi Kivity
09072daf37 KVM: Unify kvm_mmu_pre_write() and kvm_mmu_post_write()
Instead of calling two functions and repeating expensive checks, call one
function and provide it with before/after information.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:38 +03:00
Avi Kivity
621358455a KVM: Be more careful restoring fs on lightweight vmexit
i386 wants fs for accessing the pda even on a lightweight exit, so ensure
we can always restore it.  This fixes a regression on i386 introduced by
the lightweight vmexit patch.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:38 +03:00
Avi Kivity
a25f7e1f8c KVM: Reduce misfirings of the fork detector
The kvm mmu tries to detects forks by looking for repeated writes to a
page table.  If it sees a fork, it unshadows the page table so the page
table copying can proceed at native speed instead of being emulated.

However, the detector also triggered on simple demand paging access patterns:
a linear walk of memory would of course cause repeated writes to the same
pagetable page, causing it to unshadow prematurely.

Fix by resetting the fork detector if we detect a demand fault.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:38 +03:00
Avi Kivity
05e0c8c344 KVM: Unindent some code
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:38 +03:00
Avi Kivity
e6adf28365 KVM: Avoid saving and restoring some host CPU state on lightweight vmexit
Many msrs and the like will only be used by the host if we schedule() or
return to userspace.  Therefore, we avoid saving them if we handle the
exit within the kernel, and if a reschedule is not requested.

Based on a patch from Eddie Dong <eddie.dong@intel.com> with a couple of
fixes by me.

Signed-off-by: Yaozu(Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:38 +03:00
Avi Kivity
e925c5ba93 KVM: Assume that writes smaller than 4 bytes are to non-pagetable pages
This allows us to remove write protection earlier than otherwise.  Should
some mad OS choose to use byte writes to update pagetables, it will suffer
a performance hit, but still work correctly.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:38 +03:00
Anthony Liguori
c86813393f KVM: SVM: Allow direct guest access to PC debug port
The PC debug port is used for IO delay and does not require emulation.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:37 +03:00
He, Qing
fdef3ad1b3 KVM: VMX: Enable io bitmaps to avoid IO port 0x80 VMEXITs
This patch enables IO bitmaps control on vmx and unmask the 0x80 port to
avoid VMEXITs caused by accessing port 0x80. 0x80 is used as delays (see
include/asm/io.h), and handling VMEXITs on its access is unnecessary but
slows things down. This patch improves kernel build test at around
3%~5%.
	Because every VM uses the same io bitmap, it is shared between
all VMs rather than a per-VM data structure.

Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:37 +03:00
Avi Kivity
7702fd1f6f KVM: Prevent guest fpu state from leaking into the host
The lazy fpu changes did not take into account that some vmexit handlers
can sleep.  Move loading the guest state into the inner loop so that it
can be reloaded if necessary, and move loading the host state into
vmx_vcpu_put() so it can be performed whenever we relinquish the vcpu.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-06-15 12:30:59 +03:00
Sam Ravnborg
39959588f5 kvm: fix section mismatch warning in kvm-intel.o
Fix following section mismatch warning in kvm-intel.o:
WARNING: o-i386/drivers/kvm/kvm-intel.o(.init.text+0xbd): Section mismatch: reference to .exit.text: (between 'hardware_setup' and 'vmx_disabled_by_bios')

The function free_kvm_area is used in the function alloc_kvm_area which
is marked __init.
The __exit area is discarded by some archs during link-time if a
module is built-in resulting in an oops.

Note: This warning is only seen by my local copy of modpost
      but the change will soon hit upstream.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 08:18:30 -07:00
Alexey Dobriyan
e8edc6e03a Detach sched.h from mm.h
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:18:19 -07:00
Martin Schwidefsky
eeca7a36a8 [S390] Kconfig: refine depends statements.
Refine some depends statements to limit their visibility to the
environments that are actually supported.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 15:46:07 +02:00
Rafael J. Wysocki
8bb7844286 Add suspend-related notifications for CPU hotplug
Since nonboot CPUs are now disabled after tasks and devices have been
frozen and the CPU hotplug infrastructure is used for this purpose, we need
special CPU hotplug notifications that will help the CPU-hotplug-aware
subsystems distinguish normal CPU hotplug events from CPU hotplug events
related to a system-wide suspend or resume operation in progress.  This
patch introduces such notifications and causes them to be used during
suspend and resume transitions.  It also changes all of the
CPU-hotplug-aware subsystems to take these notifications into consideration
(for now they are handled in the same way as the corresponding "normal"
ones).

[oleg@tv-sign.ru: cleanups]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:56 -07:00
Avi Kivity
2ff81f70b5 KVM: Remove unused 'instruction_length'
As we no longer emulate in userspace, this is meaningless.  We don't
compute it on SVM anyway.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:32 +03:00
Avi Kivity
02c8320972 KVM: Don't require explicit indication of completion of mmio or pio
It is illegal not to return from a pio or mmio request without completing
it, as mmio or pio is an atomic operation.  Therefore, we can simplify
the userspace interface by avoiding the completion indication.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:32 +03:00
Avi Kivity
e7df56e4a0 KVM: Remove extraneous guest entry on mmio read
When emulating an mmio read, we actually emulate twice: once to determine
the physical address of the mmio, and, after we've exited to userspace to
get the mmio value, we emulate again to place the value in the result
register and update any flags.

But we don't really need to enter the guest again for that, only to take
an immediate vmexit.  So, if we detect that we're doing an mmio read,
emulate a single instruction before entering the guest again.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:32 +03:00
Anthony Liguori
94dfbdb389 KVM: SVM: Only save/restore MSRs when needed
We only have to save/restore MSR_GS_BASE on every VMEXIT.  The rest can be
saved/restored when we leave the VCPU.  Since we don't emulate the DEBUGCTL
MSRs and the guest cannot write to them, we don't have to worry about
saving/restoring them at all.

This shaves a whopping 40% off raw vmexit costs on AMD.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:32 +03:00
Adrian Bunk
2807696c37 KVM: fix an if() condition
It might have worked in this case since PT_PRESENT_MASK is 1, but let's
express this correctly.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:31 +03:00
Anthony Liguori
2ab455ccce KVM: VMX: Add lazy FPU support for VT
Only save/restore the FPU host state when the guest is actually using the
FPU.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:31 +03:00
Anthony Liguori
25c4c2762e KVM: VMX: Properly shadow the CR0 register in the vcpu struct
Set all of the host mask bits for CR0 so that we can maintain a proper
shadow of CR0.  This exposes CR0.TS, paving the way for lazy fpu handling.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:31 +03:00
Avi Kivity
e0e5127d06 KVM: Don't complain about cpu erratum AA15
It slows down Windows x64 horribly.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:31 +03:00
Anthony Liguori
7807fa6ca5 KVM: Lazy FPU support for SVM
Avoid saving and restoring the guest fpu state on every exit.  This
shaves ~100 cycles off the guest/host switch.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:31 +03:00
Avi Kivity
4c690a1e86 KVM: Allow passing 64-bit values to the emulated read/write API
This simplifies the API somewhat (by eliminating the special-case
cmpxchg8b on i386).

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:31 +03:00
Avi Kivity
1165f5fec1 KVM: Per-vcpu statistics
Make the exit statistics per-vcpu instead of global.  This gives a 3.5%
boost when running one virtual machine per core on my two socket dual core
(4 cores total) machine.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:30 +03:00
Yaozu Dong
3fca036530 KVM: VMX: Avoid unnecessary vcpu_load()/vcpu_put() cycles
By checking if a reschedule is needed, we avoid dropping the vcpu.

[With changes by me, based on Anthony Liguori's observations]

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:30 +03:00
Yaozu Dong
d6c69ee9a2 KVM: MMU: Avoid heavy ASSERT at non debug mode.
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:30 +03:00
Avi Kivity
4d56c8a787 KVM: VMX: Only save/restore MSR_K6_STAR if necessary
Intel hosts only support syscall/sysret in long more (and only if efer.sce
is enabled), so only reload the related MSR_K6_STAR if the guest will
actually be able to use it.

This reduces vmexit cost by about 500 cycles (6400 -> 5870) on my setup.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:30 +03:00
Avi Kivity
35cc7f9711 KVM: Fold drivers/kvm/kvm_vmx.h into drivers/kvm/vmx.c
No meat in that file.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:30 +03:00
Avi Kivity
e38aea3e93 KVM: VMX: Don't switch 64-bit msrs for 32-bit guests
Some msrs are only used by x86_64 instructions, and are therefore
not needed when the guest is legacy mode.  By not bothering to switch
them, we reduce vmexit latency by 2400 cycles (from about 8800) when
running a 32-bt guest on a 64-bit host.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:30 +03:00
Avi Kivity
2345df8c55 KVM: VMX: Reduce unnecessary saving of host msrs
THe automatically switched msrs are never changed on the host (with
the exception of MSR_KERNEL_GS_BASE) and thus there is no need to save
them on every vm entry.

This reduces vmexit latency by ~400 cycles on i386 and by ~900 cycles (10%)
on x86_64.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:29 +03:00
Avi Kivity
c9047f5333 KVM: Handle guest page faults when emulating mmio
Usually, guest page faults are detected by the kvm page fault handler,
which detects if they are shadow faults, mmio faults, pagetable faults,
or normal guest page faults.

However, in ceratin circumstances, we can detect a page fault much later.
One of these events is the following combination:

- A two memory operand instruction (e.g. movsb) is executed.
- The first operand is in mmio space (which is the fault reported to kvm)
- The second operand is in an ummaped address (e.g. a guest page fault)

The Windows 2000 installer does such an access, an promptly hangs.  Fix
by adding the missing page fault injection on that path.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:29 +03:00
Avi Kivity
364b625b56 KVM: SVM: Report hardware exit reason to userspace instead of dmesg
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:29 +03:00
Avi Kivity
8c4385024d KVM: Retry sleeping allocation if atomic allocation fails
This avoids -ENOMEM under memory pressure.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:29 +03:00
Avi Kivity
b5a33a7572 KVM: Use slab caches to allocate mmu data structures
Better leak detection, statistics, memory use, speed -- goodness all
around.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:29 +03:00
Avi Kivity
417726a3fb KVM: Handle partial pae pdptr
Some guests (Solaris) do not set up all four pdptrs, but leave some invalid.
kvm incorrectly treated these as valid page directories, pinning the
wrong pages and causing general confusion.

Fix by checking the valid bit of a pae pdpte.  This closes sourceforge bug
1698922.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:29 +03:00
Avi Kivity
d917a6b92d KVM: Initialize cr0 to indicate an fpu is present
Solaris panics if it sees a cpu with no fpu, and it seems to rely on this
bit.  Closes sourceforge bug 1698920.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:29 +03:00
Eric Sesterhenn / Snakebyte
3964994bb5 KVM: Fix overflow bug in overflow detection code
The expression

   sp - 6 < sp

where sp is a u16 is undefined in C since 'sp - 6' is promoted to int,
and signed overflow is undefined in C.  gcc 4.2 actually warns about it.
Replace with a simpler test.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:29 +03:00
Avi Kivity
5008fdf5b6 KVM: Use kernel-standard types
Noted by Joerg Roedel.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:28 +03:00
Joerg Roedel
80b7706e4c KVM: SVM: enable LBRV virtualization if available
This patch enables the virtualization of the last branch record MSRs on
SVM if this feature is available in hardware. It also introduces a small
and simple check feature for specific SVM extensions.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:28 +03:00
Avi Kivity
b8836737d9 KVM: Add fpu get/set operations
These are really helpful when migrating an floating point app to another
machine.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:28 +03:00
Avi Kivity
e8207547d2 KVM: Add physical memory aliasing feature
With this, we can specify that accesses to one physical memory range will
be remapped to another.  This is useful for the vga window at 0xa0000 which
is used as a movable window into the (much larger) framebuffer.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:28 +03:00
Avi Kivity
954bbbc236 KVM: Simply gfn_to_page()
Mapping a guest page to a host page is a common operation.  Currently,
one has first to find the memory slot where the page belongs (gfn_to_memslot),
then locate the page itself (gfn_to_page()).

This is clumsy, and also won't work well with memory aliases.  So simplify
gfn_to_page() not to require memory slot translation first, and instead do it
internally.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:28 +03:00
Dor Laor
e0fa826f96 KVM: Add mmu cache clear function
Functions that play around with the physical memory map
need a way to clear mappings to possibly nonexistent or
invalid memory.  Both the mmu cache and the processor tlb
are cleared.

Signed-off-by: Dor Laor <dor.laor@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:28 +03:00
Avi Kivity
df513e2cdd KVM: x86 emulator: fix bit string operations operand size
On x86, bit operations operate on a string of bits that can reside in
multiple words.  For example, 'btsl %eax, (blah)' will touch the word
at blah+4 if %eax is between 32 and 63.

The x86 emulator compensates for that by advancing the operand address
by (bit offset / BITS_PER_LONG) and truncating the bit offset to the
range (0..BITS_PER_LONG-1).  This has a side effect of forcing the operand
size to 8 bytes on 64-bit hosts.

Now, a 32-bit guest goes and fork()s a process.  It write protects a stack
page at 0xbffff000 using the 'btr' instruction, at offset 0xffc in the page
table, with bit offset 1 (for the write permission bit).

The emulator now forces the operand size to 8 bytes as previously described,
and an innocent page table update turns into a cross-page-boundary write,
which is assumed by the mmu code not to be a page table, so it doesn't
actually clear the corresponding shadow page table entry.  The guest and
host permissions are out of sync and guest memory is corrupted soon
afterwards, leading to guest failure.

Fix by not using BITS_PER_LONG as the word size; instead use the actual
operand size, so we get a 32-bit write in that case.

Note we still have to teach the mmu to handle cross-page-boundary writes
to guest page table; but for now this allows Damn Small Linux 0.4 (2.4.20)
to boot.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:28 +03:00
Avi Kivity
afeb1f14c5 KVM: Remove debug message
No longer interesting.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:27 +03:00
Avi Kivity
36868f7b0e KVM: Use list_move()
Use list_move() where possible.  Noticed by Dor Laor.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:27 +03:00
Michal Piotrowski
55bf402834 KVM: Remove unused function
Remove unused function

CC      drivers/kvm/svm.o
drivers/kvm/svm.c:207: warning: ‘inject_db’ defined but not used

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:27 +03:00
Avi Kivity
0cc5064d33 KVM: SVM: Ensure timestamp counter monotonicity
When a vcpu is migrated from one cpu to another, its timestamp counter
may lose its monotonic property if the host has unsynced timestamp counters.
This can confuse the guest, sometimes to the point of refusing to boot.

As the rdtsc instruction is rather fast on AMD processors (7-10 cycles),
we can simply record the last host tsc when we drop the cpu, and adjust
the vcpu tsc offset when we detect that we've migrated to a different cpu.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:27 +03:00
Avi Kivity
d28c6cfbbc KVM: MMU: Fix hugepage pdes mapping same physical address with different access
The kvm mmu keeps a shadow page for hugepage pdes; if several such pdes map
the same physical address, they share the same shadow page.  This is a fairly
common case (kernel mappings on i386 nonpae Linux, for example).

However, if the two pdes map the same memory but with different permissions, kvm
will happily use the cached shadow page.  If the access through the more
permissive pde will occur after the access to the strict pde, an endless pagefault
loop will be generated and the guest will make no progress.

Fix by making the access permissions part of the cache lookup key.

The fix allows Xen pae to boot on kvm and run guest domains.

Thanks to Jeremy Fitzhardinge for reporting the bug and testing the fix.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:27 +03:00
Joerg Roedel
916ce2360f KVM: SVM: forbid guest to execute monitor/mwait
This patch forbids the guest to execute monitor/mwait instructions on
SVM. This is necessary because the guest can execute these instructions
if they are available even if the kvm cpuid doesn't report its
existence.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:26 +03:00
Sergey Kiselev
0e5bf0d0e4 KVM: Handle writes to MCG_STATUS msr
Some older (~2.6.7) kernels write MCG_STATUS register during kernel
boot (mce_clear_all() function, called from mce_init()). It's not
currently handled by kvm and will cause it to inject a GPF.
Following patch adds a "nop" handler for this.

Signed-off-by: Sergey Kiselev <sergey.kiselev@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:26 +03:00
Avi Kivity
fcd3410870 KVM: Remove unused and write-only variables
Trivial cleanup.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:26 +03:00
Avi Kivity
6da63cf95f KVM: Don't allow the guest to turn off the cpu cache
The cpu cache is a host resource; the guest should not be able to turn
it off (even for itself).

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:26 +03:00
Avi Kivity
038881c8be KVM: Hack real-mode segments on vmx from KVM_SET_SREGS
As usual, we need to mangle segment registers when emulating real mode
as vm86 has specific constraints.  We special case the reset segment base,
and set the "access rights" (or descriptor flags) to vm86 comaptible values.

This fixes reboot on vmx.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:26 +03:00
Avi Kivity
024aa1c02f KVM: Modify guest segments after potentially switching modes
The SET_SREGS ioctl modifies both cr0.pe (real mode/protected mode) and
guest segment registers.  Since segment handling is modified by the mode on
Intel procesors, update the segment registers after the mode switch has taken
place.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:26 +03:00
Avi Kivity
f6528b03f1 KVM: Remove set_cr0_no_modeswitch() arch op
set_cr0_no_modeswitch() was a hack to avoid corrupting segment registers.
As we now cache the protected mode values on entry to real mode, this
isn't an issue anymore, and it interferes with reboot (which usually _is_
a modeswitch).

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:25 +03:00
Avi Kivity
8cb5b03332 KVM: Workaround vmx inability to virtualize the reset state
The reset state has cs.selector == 0xf000 and cs.base == 0xffff0000,
which aren't compatible with vm86 mode, which is used for real mode
virtualization.

When we create a vcpu, we set cs.base to 0xf0000, but if we get there by
way of a reset, the values are inconsistent and vmx refuses to enter
guest mode.

Workaround by detecting the state and munging it appropriately.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:25 +03:00
Avi Kivity
aac012245a KVM: MMU: Remove global pte tracking
The initial, noncaching, version of the kvm mmu flushed the all nonglobal
shadow page table translations (much like a native tlb flush).  The new
implementation flushes translations only when they change, rendering global
pte tracking superfluous.

This removes the unused tracking mechanism and storage space.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:25 +03:00
Avi Kivity
ca5aac1f96 KVM: MMU: Remove unnecessary check for pdptr access
We already special case the pdptr access, so no need to check it again.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:25 +03:00
Avi Kivity
039576c03c KVM: Avoid guest virtual addresses in string pio userspace interface
The current string pio interface communicates using guest virtual addresses,
relying on userspace to translate addresses and to check permissions.  This
interface cannot fully support guest smp, as the check needs to take into
account two pages at one in case an unaligned string transfer straddles a
page boundary.

Change the interface not to communicate guest addresses at all; instead use
a buffer page (mmaped by userspace) and do transfers there.  The kernel
manages the virtual to physical translation and can perform the checks
atomically by taking the appropriate locks.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:25 +03:00
Avi Kivity
f0fe510864 KVM: Future-proof argument-less ioctls
Some ioctls ignore their arguments.  By requiring them to be zero now,
we allow a nonzero value to have some special meaning in the future.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:25 +03:00
Avi Kivity
07c45a366d KVM: Allow kernel to select size of mmap() buffer
This allows us to store offsets in the kernel/user kvm_run area, and be
sure that userspace has them mapped.  As offsets can be outside the
kvm_run struct, userspace has no way of knowing how much to mmap.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:24 +03:00
Avi Kivity
1961d276c8 KVM: Add guest mode signal mask
Allow a special signal mask to be used while executing in guest mode.  This
allows signals to be used to interrupt a vcpu without requiring signal
delivery to a userspace handler, which is quite expensive.  Userspace still
receives -EINTR and can get the signal via sigwait().

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:24 +03:00
Avi Kivity
6722c51c51 KVM: Initialize the apic_base msr on svm too
Older userspace didn't care, but newer userspace (with the cpuid changes)
does.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:24 +03:00
Avi Kivity
1b19f3e61d KVM: Add a special exit reason when exiting due to an interrupt
This is redundant, as we also return -EINTR from the ioctl, but it
allows us to examine the exit_reason field on resume without seeing
old data.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:24 +03:00
Avi Kivity
8eb7d334bd KVM: Fold kvm_run::exit_type into kvm_run::exit_reason
Currently, userspace is told about the nature of the last exit from the
guest using two fields, exit_type and exit_reason, where exit_type has
just two enumerations (and no need for more).  So fold exit_type into
exit_reason, reducing the complexity of determining what really happened.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:24 +03:00
Avi Kivity
b4e63f560b KVM: Allow userspace to process hypercalls which have no kernel handler
This is useful for paravirtualized graphics devices, for example.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:24 +03:00
Avi Kivity
5d308f4550 KVM: Add method to check for backwards-compatible API extensions
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:24 +03:00
Avi Kivity
106b552b43 KVM: Remove the 'emulated' field from the userspace interface
We no longer emulate single instructions in userspace.  Instead, we service
mmio or pio requests.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:23 +03:00
Avi Kivity
06465c5a3a KVM: Handle cpuid in the kernel instead of punting to userspace
KVM used to handle cpuid by letting userspace decide what values to
return to the guest.  We now handle cpuid completely in the kernel.  We
still let userspace decide which values the guest will see by having
userspace set up the value table beforehand (this is necessary to allow
management software to set the cpu features to the least common denominator,
so that live migration can work).

The motivation for the change is that kvm kernel code can be impacted by
cpuid features, for example the x86 emulator.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:23 +03:00
Avi Kivity
46fc147788 KVM: Do not communicate to userspace through cpu registers during PIO
Currently when passing the a PIO emulation request to userspace, we
rely on userspace updating %rax (on 'in' instructions) and %rsi/%rdi/%rcx
(on string instructions).  This (a) requires two extra ioctls for getting
and setting the registers and (b) is unfriendly to non-x86 archs, when
they get kvm ports.

So fix by doing the register fixups in the kernel and passing to userspace
only an abstract description of the PIO to be done.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:23 +03:00
Avi Kivity
9a2bb7f486 KVM: Use a shared page for kernel/user communication when runing a vcpu
Instead of passing a 'struct kvm_run' back and forth between the kernel and
userspace, allocate a page and allow the user to mmap() it.  This reduces
needless copying and makes the interface expandable by providing lots of
free space.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:23 +03:00
Avi Kivity
1ea252afcd KVM: Fix bogus sign extension in mmu mapping audit
When auditing a 32-bit guest on a 64-bit host, sign extension of the page
table directory pointer table index caused bogus addresses to be shown on
audit errors.

Fix by declaring the index unsigned.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:23 +03:00
Avi Kivity
bbe4432e66 KVM: Use own minor number
Use the minor number (232) allocated to kvm by lanana.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:22 +03:00
Dor Laor
510043da85 KVM: Use the generic skip_emulated_instruction() in hypercall code
Instead of twiddling the rip registers directly, use the
skip_emulated_instruction() function to do that for us.

Signed-off-by: Dor Laor <dor.laor@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:22 +03:00
Dor Laor
9b22bf5783 KVM: Fix guest register corruption on paravirt hypercall
The hypercall code mixes up the ->cache_regs() and ->decache_regs()
callbacks, resulting in guest register corruption.

Signed-off-by: Dor Laor <dor.laor@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03 10:52:22 +03:00
Avi Kivity
6b8d0f9b18 KVM: Fix off-by-one when writing to a nonpae guest pde
Nonpae guest pdes are shadowed by two pae ptes, so we double the offset
twice: once to account for the pte size difference, and once because we
need to shadow pdes for a single guest pde.

But when writing to the upper guest pde we also need to truncate the
lower bits, otherwise the multiply shifts these bits into the pde index
and causes an access to the wrong shadow pde.  If we're at the end of the
page (accessing the very last guest pde) we can even overflow into the
next host page and oops.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-04-19 18:39:26 +03:00
Ingo Molnar
6d9658df07 KVM: always reload segment selectors
failed VM entry on VMX might still change %fs or %gs, thus make sure
that KVM always reloads the segment selectors. This is crutial on both
x86 and x86_64: x86 has __KERNEL_PDA in %fs on which things like
'current' depends and x86_64 has 0 there and needs MSR_GS_BASE to work.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-03-27 17:55:48 +02:00
Avi Kivity
6af11b9e82 KVM: Prevent system selectors leaking into guest on real->protected mode transition on vmx
Intel virtualization extensions do not support virtualizing real mode.  So
kvm uses virtualized vm86 mode to run real mode code.  Unfortunately, this
virtualized vm86 mode does not support the so called "big real" mode, where
the segment selector and base do not agree with each other according to the
real mode rules (base == selector << 4).

To work around this, kvm checks whether a selector/base pair violates the
virtualized vm86 rules, and if so, forces it into conformance.  On a
transition back to protected mode, if we see that the guest did not touch
a forced segment, we restore it back to the original protected mode value.

This pile of hacks breaks down if the gdt has changed in real mode, as it
can cause a segment selector to point to a system descriptor instead of a
normal data segment.  In fact, this happens with the Windows bootloader
and the qemu acpi bios, where a protected mode memcpy routine issues an
innocent 'pop %es' and traps on an attempt to load a system descriptor.

"Fix" by checking if the to-be-restored selector points at a system segment,
and if so, coercing it into a normal data segment.  The long term solution,
of course, is to abandon vm86 mode and use emulation for big real mode.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-27 17:54:38 +02:00
Avi Kivity
27aba76615 KVM: MMU: Fix host memory corruption on i386 with >= 4GB ram
PAGE_MASK is an unsigned long, so using it to mask physical addresses on
i386 (which are 64-bit wide) leads to truncation.  This can result in
page->private of unrelated memory pages being modified, with disasterous
results.

Fix by not using PAGE_MASK for physical addresses; instead calculate
the correct value directly from PAGE_SIZE.  Also fix a similar BUG_ON().

Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-18 10:49:09 +02:00
Avi Kivity
ac1b714e78 KVM: MMU: Fix guest writes to nonpae pde
KVM shadow page tables are always in pae mode, regardless of the guest
setting.  This means that a guest pde (mapping 4MB of memory) is mapped
to two shadow pdes (mapping 2MB each).

When the guest writes to a pte or pde, we intercept the write and emulate it.
We also remove any shadowed mappings corresponding to the write.  Since the
mmu did not account for the doubling in the number of pdes, it removed the
wrong entry, resulting in a mismatch between shadow page tables and guest
page tables, followed shortly by guest memory corruption.

This patch fixes the problem by detecting the special case of writing to
a non-pae pde and adjusting the address and number of shadow pdes zapped
accordingly.

Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-18 10:49:09 +02:00
Avi Kivity
f5b42c3324 KVM: Fix guest sysenter on vmx
The vmx code currently treats the guest's sysenter support msrs as 32-bit
values, which breaks 32-bit compat mode userspace on 64-bit guests.  Fix by
using the native word width of the machine.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-18 10:49:06 +02:00
Avi Kivity
ca45aaae1e KVM: Unset kvm_arch_ops if arch module loading failed
Otherwise, the core module thinks the arch module is loaded, and won't
let you reload it after you've fixed the bug.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-18 10:49:06 +02:00
Andrew Morton
e9cdb1e330 KVM: Move kvmfs magic number to <linux/magic.h>
Use the standard magic.h for kvmfs.

Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:43 +02:00
Avi Kivity
58e690e6fd KVM: Fix bogus failure in kvm.ko module initialization
A bogus 'return r' can cause an otherwise successful module load to fail.
This both denies users the use of kvm, and it also denies them the use of
their machine, as it leaves a filesystem registered with its callbacks
pointing into now-freed module memory.

Fix by returning a zero like a good module.

Thanks to Richard Lucassen <mailinglists@lucassen.org> (?) for reporting
the problem and for providing access to a machine which exhibited it.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:43 +02:00
Uri Lublin
ff990d5952 KVM: Remove write access permissions when dirty-page-logging is enabled
Enabling dirty page logging is done using KVM_SET_MEMORY_REGION ioctl.
If the memory region already exists, we need to remove write accesses,
so writes will be caught, and dirty pages will be logged.

Signed-off-by: Uri Lublin <uril@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:43 +02:00
Uri Lublin
02b27c1f80 kvm: move do_remove_write_access() up
To be called from kvm_vm_ioctl_set_memory_region()

Signed-off-by: Uri Lublin <uril@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:43 +02:00
Uri Lublin
cd1a4a982a KVM: Fix dirty page log bitmap size/access calculation
Since dirty_bitmap is an unsigned long array, the alignment and size need
to take that into account.

Signed-off-by: Uri Lublin <uril@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:42 +02:00
Uri Lublin
ab51a434c5 KVM: Add missing calls to mark_page_dirty()
A few places where we modify guest memory fail to call mark_page_dirty(),
causing live migration to fail.  This adds the missing calls.

Signed-off-by: Uri Lublin <uril@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:42 +02:00
Avi Kivity
bccf2150fe KVM: Per-vcpu inodes
Allocate a distinct inode for every vcpu in a VM.  This has the following
benefits:

 - the filp cachelines are no longer bounced when f_count is incremented on
   every ioctl()
 - the API and internal code are distinctly clearer; for example, on the
   KVM_GET_REGS ioctl, there is no need to copy the vcpu number from
   userspace and then copy the registers back; the vcpu identity is derived
   from the fd used to make the call

Right now the performance benefits are completely theoretical since (a) we
don't support more than one vcpu per VM and (b) virtualization hardware
inefficiencies completely everwhelm any cacheline bouncing effects.  But
both of these will change, and we need to prepare the API today.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:42 +02:00
Avi Kivity
c5ea766006 KVM: Move kvm_vm_ioctl_create_vcpu() around
In preparation of some hacking.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:42 +02:00
Avi Kivity
2c6f5df979 KVM: Rename some kvm_dev_ioctl_*() functions to kvm_vm_ioctl_*()
This reflects the changed scope, from device-wide to single vm (previously
every device open created a virtual machine).

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:42 +02:00
Avi Kivity
f17abe9a44 KVM: Create an inode per virtual machine
This avoids having filp->f_op and the corresponding inode->i_fop different,
which is a little unorthodox.

The ioctl list is split into two: global kvm ioctls and per-vm ioctls.  A new
ioctl, KVM_CREATE_VM, is used to create VMs and return the VM fd.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:42 +02:00
Avi Kivity
37e29d906c KVM: Add internal filesystem for generating inodes
The kvmfs inodes will represent virtual machines and vcpus, as necessary,
reducing cacheline bouncing due to inodes and filps being shared.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:41 +02:00
Avi Kivity
19d1408dfd KVM: More 0 -> NULL conversions
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:41 +02:00
Joerg Roedel
0152527b76 KVM: SVM: intercept SMI to handle it at host level
This patch changes the SVM code to intercept SMIs and handle it
outside the guest.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:41 +02:00
Avi Kivity
cd205625e9 KVM: svm: init cr0 with the wp bit set
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:41 +02:00
Avi Kivity
270fd9b96f KVM: Wire up hypercall handlers to a central arch-independent location
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:41 +02:00
Avi Kivity
02e235bc8e KVM: Add hypercall host support for svm
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:41 +02:00
Ingo Molnar
c21415e843 KVM: Add host hypercall support for vmx
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:40 +02:00
Ingo Molnar
102d8325a1 KVM: add MSR based hypercall API
This adds a special MSR based hypercall API to KVM. This is to be
used by paravirtual kernels and virtual drivers.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:40 +02:00
Markus Rechberger
5972e9535e KVM: Use page_private()/set_page_private() apis
Besides using an established api, this allows using kvm in older kernels.

Signed-off-by: Markus Rechberger <markus.rechberger@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:39 +02:00
Ahmed S. Darwish
9d8f549dc6 KVM: Use ARRAY_SIZE macro instead of manual calculation.
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Dor Laor <dor.laor@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:39 +02:00
Joerg Roedel
de979caacc KVM: vmx: hack set_cr0_no_modeswitch() to actually do modeswitch
The whole thing is rotten, but this allows vmx to boot with the guest reboot
fix.

Signed-off-by: Markus Rechberger <markus.rechberger@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:39 +02:00
Avi Kivity
d27d4aca18 KVM: Cosmetics
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:39 +02:00
Jeremy Katz
43934a38d7 KVM: Move virtualization deactivation from CPU_DEAD state to CPU_DOWN_PREPARE
This gives it more chances of surviving suspend.

Signed-off-by: Jeremy Katz <katzj@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:39 +02:00
Avi Kivity
bf3f8e86c2 KVM: mmu: add missing dirty page tracking cases
We fail to mark a page dirty in three cases:

- setting the accessed bit in a pte
- setting the dirty bit in a pte
- emulating a write into a pagetable

This fix adds the missing cases.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-04 11:12:39 +02:00
Jeremy Fitzhardinge
464d1a78fb [PATCH] i386: Convert i386 PDA code to use %fs
Convert the PDA code to use %fs rather than %gs as the segment for
per-processor data.  This is because some processors show a small but
measurable performance gain for reloading a NULL segment selector (as %fs
generally is in user-space) versus a non-NULL one (as %gs generally is).

On modern processors the difference is very small, perhaps undetectable.
Some old AMD "K6 3D+" processors are noticably slower when %fs is used
rather than %gs; I have no idea why this might be, but I think they're
sufficiently rare that it doesn't matter much.

This patch also fixes the math emulator, which had not been adjusted to
match the changed struct pt_regs.

[frederik.deweerdt@gmail.com: fixit with gdb]
[mingo@elte.hu: Fix KVM too]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Ian Campbell <Ian.Campbell@XenSource.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Zachary Amsden <zach@vmware.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2007-02-13 13:26:20 +01:00
Avi Kivity
59ae6c6b87 [PATCH] KVM: Host suspend/resume support
Add the necessary callbacks to suspend and resume a host running kvm.  This is
just a repeat of the cpu hotplug/unplug work.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:41 -08:00
Avi Kivity
774c47f1d7 [PATCH] KVM: cpu hotplug support
On hotplug, we execute the hardware extension enable sequence.  On unplug, we
decache any vcpus that last ran on the exiting cpu, and execute the hardware
extension disable sequence.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:41 -08:00
Avi Kivity
8d0be2b3bf [PATCH] KVM: VMX: add vcpu_clear()
Like the inline code it replaces, this function decaches the vmcs from the cpu
it last executed on.  in addition:

 - vcpu_clear() works if the last cpu is also the cpu we're running on
 - it is faster on larger smps by virtue of using smp_call_function_single()

Includes fix from Ingo Molnar.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:41 -08:00
Avi Kivity
133de9021d [PATCH] KVM: Add a global list of all virtual machines
This will allow us to iterate over all vcpus and see which cpus they are
running on.

[akpm@osdl.org: use standard (ugly) initialisers]
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:40 -08:00
Ingo Molnar
1e8ba6fba5 [PATCH] kvm: fix vcpu freeing bug
vcpu_load() can return NULL and it sometimes does in failure paths (for
example when the userspace ABI version is too old) - causing a preemption
count underflow in the ->vcpu_free() later on.  So check for NULL.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:40 -08:00
Avi Kivity
26bb83a755 [PATCH] kvm: VMX: Reload ds and es even in 64-bit mode
Or 32-bit userspace will get confused.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:40 -08:00
Dor Laor
54810342f1 [PATCH] kvm: Two-way apic tpr synchronization
We report the value of cr8 to userspace on an exit.  Also let userspace change
cr8 when we re-enter the guest.  The lets 64-bit guest code maintain the tpr
correctly.

Thanks for Yaniv Kamay for the idea.

Signed-off-by: Dor Laor <dor.laor@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:40 -08:00
Avi Kivity
d92899a001 [PATCH] kvm: SVM: Hack initial cpu csbase to be consistent with intel
This allows us to run the mmu testsuite on amd.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:40 -08:00
Avi Kivity
ac6c2bc592 [PATCH] kvm: Fix mmu going crazy of guest sets cr0.wp == 0
The kvm mmu relies on cr0.wp being set even if the guest does not set it.  The
vmx code correctly forces cr0.wp at all times, the svm code does not, so it
can't boot solaris without this patch.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:40 -08:00
Avi Kivity
988ad74ff6 [PATCH] kvm: vmx: handle triple faults by returning EXIT_REASON_SHUTDOWN to userspace
Just like svm.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:40 -08:00
Avi Kivity
e119d117a1 [PATCH] kvm: Fix gva_to_gpa()
gva_to_gpa() needs to be updated to the new walk_addr() calling convention,
otherwise it may oops under some circumstances.

Use the opportunity to remove all the code duplication in gva_to_gpa(), which
essentially repeats the calculations in walk_addr().

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:40 -08:00
S.Caglar Onur
a0610ddf6b [PATCH] kvm: Fix asm constraint for lldt instruction
lldt does not accept immediate operands, which "g" allows.

Signed-off-by: S.Caglar Onur <caglar@pardus.org.tr>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:40 -08:00
Ingo Molnar
96958231ce [PATCH] kvm: optimize inline assembly
Forms like "0(%rsp)" generate an instruction with an unnecessary one byte
displacement under certain circumstances.  replace with the equivalent
"(%rsp)".

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:40 -08:00
Al Viro
11718b4d6b [PATCH] misc NULL noise removal
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:14:07 -08:00
Al Viro
8b6d44c7bd [PATCH] kvm: NULL noise removal
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:14:07 -08:00
Al Viro
2f36698799 [PATCH] kvm: __user annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:14:07 -08:00
Avi Kivity
432bd6cbf9 [PATCH] KVM: fix lockup on 32-bit intel hosts with nx disabled in the bios
Intel hosts, without long mode, and with nx support disabled in the bios
have an efer that is readable but not writable.  This causes a lockup on
switch to guest mode (even though it should exit with reason 34 according
to the documentation).

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-01 16:22:41 -08:00
Robert P. J. Day
49b14f24cc [PATCH] Fix "CONFIG_X86_64_" typo in drivers/kvm/svm.c
Fix what looks like an obvious typo in the file drivers/kvm/svm.c.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-30 08:26:45 -08:00
Joerg Roedel
46fe4ddd9d [PATCH] KVM: SVM: Propagate cpu shutdown events to userspace
This patch implements forwarding of SHUTDOWN intercepts from the guest on to
userspace on AMD SVM.  A SHUTDOWN event occurs when the guest produces a
triple fault (e.g.  on reboot).  This also fixes the bug that a guest reboot
actually causes a host reboot under some circumstances.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:57 -08:00
Avi Kivity
73b1087e61 [PATCH] KVM: MMU: Report nx faults to the guest
With the recent guest page fault change, we perform access checks on our
own instead of relying on the cpu.  This means we have to perform the nx
checks as well.

Software like the google toolbar on windows appears to rely on this
somehow.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:57 -08:00
Avi Kivity
7993ba43db [PATCH] KVM: MMU: Perform access checks in walk_addr()
Check pte permission bits in walk_addr(), instead of scattering the checks all
over the code.  This has the following benefits:

1. We no longer set the accessed bit for accessed which fail permission checks.
2. Setting the accessed bit is simplified.
3. Under some circumstances, we used to pretend a page fault was fixed when
   it would actually fail the access checks.  This caused an unnecessary
   vmexit.
4. The error code for guest page faults is now correct.

The fix helps netbsd further along booting, and allows kvm to pass the new mmu
testsuite.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:57 -08:00
Avi Kivity
6f00e68f21 [PATCH] KVM: Emulate IA32_MISC_ENABLE msr
This allows netbsd 3.1 i386 to get further along installing.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:57 -08:00
Leonard Norrgard
bce66ca4a2 [PATCH] KVM: SVM: Fix SVM idt confusion
There's an obvious typo in svm_{get,set}_idt, causing it to access the ldt
instead.

Because these functions are only called for save/load on AMD, the bug does not
impact normal operation.  With the fix, save/load works as expected on AMD
hosts.

Signed-off-by: Uri Lublin <uril@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:57 -08:00
Avi Kivity
fc3dffe121 [PATCH] KVM: fix bogus pagefault on writable pages
If a page is marked as dirty in the guest pte, set_pte_common() can set the
writable bit on newly-instantiated shadow pte.  This optimization avoids
a write fault after the initial read fault.

However, if a write fault instantiates the pte, fix_write_pf() incorrectly
reports the fault as a guest page fault, and the guest oopses on what appears
to be a correctly-mapped page.

Fix is to detect the condition and only report a guest page fault on a user
access to a kernel page.

With the fix, a kvm guest can survive a whole night of running the kernel
hacker's screensaver (make -j9 in a loop).

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-23 07:52:06 -08:00
Avi Kivity
038e51de2e [PATCH] KVM: x86 emulator: fix bit string instructions
The various bit string instructions (bts, btc, etc.) fail to adjust the
address correctly if the bit address is beyond BITS_PER_LONG.

This bug creeped in as the emulator originally relied on cr2 to contain the
memory address; however we now decode it from the mod r/m bits, and must
adjust the offset to account for large bit indices.

The patch is rather large because it switches src and dst decoding around, so
that the bit index is available when decoding the memory address.

This fixes workloads like the FC5 installer.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-23 07:52:06 -08:00
Avi Kivity
cccf748b81 [PATCH] KVM: fix race between mmio reads and injected interrupts
The kvm mmio read path looks like:

 1. guest read faults
 2. kvm emulates read, calls emulator_read_emulated()
 3. fails as a read requires userspace help
 4. exit to userspace
 5. userspace emulates read, kvm sets vcpu->mmio_read_completed
 6. re-enter guest, fault again
 7. kvm emulates read, calls emulator_read_emulated()
 8. succeeds as vcpu->mmio_read_emulated is set
 9. instruction completes and guest is resumed

A problem surfaces if the userspace exit (step 5) also requests an interrupt
injection.  In that case, the guest does not re-execute the original
instruction, but the interrupt handler.  The next time an mmio read is
exectued (likely for a different address), step 3 will find
vcpu->mmio_read_completed set and return the value read for the original
instruction.

The problem manifested itself in a few annoying ways:
- little squares appear randomly on console when switching virtual terminals
- ne2000 fails under nfs read load
- rtl8139 complains about "pci errors" even though the device model is
  incapable of issuing them.

Fix by skipping interrupt injection if an mmio read is pending.

A better fix is to avoid re-entry into the guest, and re-emulating immediately
instead.  However that's a bit more complex.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-23 07:52:06 -08:00
Avi Kivity
084384754e [PATCH] KVM: make sure there is a vcpu context loaded when destroying the mmu
This makes the vmwrite errors on vm shutdown go away.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-23 07:52:06 -08:00
Herbert Xu
e001548911 [PATCH] vmx: Fix register constraint in launch code
Both "=r" and "=g" breaks my build on i386:

  $ make
    CC [M]  drivers/kvm/vmx.o
  {standard input}: Assembler messages:
  {standard input}:3318: Error: bad register name `%sil'
  make[1]: *** [drivers/kvm/vmx.o] Error 1
  make: *** [_module_drivers/kvm] Error 2

The reason is that setbe requires an 8-bit register but "=r" does not
constrain the target register to be one that has an 8-bit version on
i386.

According to

	http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10153

the correct constraint is "=q".

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-22 19:27:02 -08:00
Ingo Molnar
07031e14c1 [PATCH] KVM: add VM-exit profiling
This adds the profile=kvm boot option, which enables KVM to profile VM
exits.

Use: "readprofile -m ./System.map | sort -n" to see the resulting
output:

   [...]
   18246 serial_out                               148.3415
   18945 native_flush_tlb                         378.9000
   23618 serial_in                                212.7748
   29279 __spin_unlock_irq                        622.9574
   43447 native_apic_write                        2068.9048
   52702 enable_8259A_irq                         742.2817
   54250 vgacon_scroll                             89.3740
   67394 ide_inb                                  6126.7273
   79514 copy_page_range                           98.1654
   84868 do_wp_page                                86.6000
  140266 pit_read                                 783.6089
  151436 ide_outb                                 25239.3333
  152668 native_io_delay                          21809.7143
  174783 mask_and_ack_8259A                       783.7803
  362404 native_set_pte_at                        36240.4000
 1688747 total                                      0.5009

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-11 18:18:21 -08:00
Dor Laor
022a93080c [PATCH] KVM: Simplify test for interrupt window
No need to test for rflags.if as both VT and SVM specs assure us that on exit
caused from interrupt window opening, 'if' is set.

Signed-off-by: Dor Laor <dor.laor@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05 23:55:28 -08:00
Ingo Molnar
68a99f6d37 [PATCH] KVM: Simplify mmu_alloc_roots()
Small optimization/cleanup:

    page == page_header(page->page_hpa)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05 23:55:28 -08:00
Ingo Molnar
d21225ee2b [PATCH] KVM: Make loading cr3 more robust
Prevent the guest's loading of a corrupt cr3 (pointing at no guest phsyical
page) from crashing the host.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-05 23:55:28 -08:00