Commit graph

16 commits

Author SHA1 Message Date
Dmitry Torokhov
469ba4dff9 Input: keyboards - switch to using input_dev->dev.parent
In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-12 01:34:58 -04:00
Dmitry Torokhov
b356872fa4 Input: drivers/input/keyboard - don't access dev->private directly
Use input_get_drvdata() and input_set_drvdata() instead.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-12 01:34:20 -04:00
Dmitry Torokhov
2b03b60e6b Input: keyboards - handle errors when registering input devices
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-11-05 22:39:56 -05:00
Russell King
36bd262b3f [ARM] Fix Zaurii keyboard/touchscreen drivers
The Zaurii drivers were partially fixed up for the IRQ register
changes, but unfortunately missed some bits, resulting in build
errors.  Fix these.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-15 13:50:02 +01:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Thomas Gleixner
dace145374 [PATCH] irq-flags: misc drivers: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:50 -07:00
Richard Purdie
ed8f9e2f04 Input: change from numbered to named switches
Remove the numbered SW_* entries from the input system and assign names
to the existing users.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-05-29 23:31:03 -04:00
Richard Purdie
f11a7c0935 Input: spitzkbd - fix the reversed Address and Calender keys
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-26 00:13:42 -04:00
Richard Purdie
4872f78888 Input: zaurus keyboard driver updates
* Change the scan interval from 100ms to 50ms. This stops the key
    repeat from triggering on double letter presses.
  * Remove unneeded stale hinge code from corgikbd
  * Change unneeded corgi GPIO pins to inputs when suspended
  * Add support for the headphone jack switch for both corgi and spitz
    (as switch SW_2)

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14 00:12:32 -05:00
Russell King
9ded96f24c [PATCH] IRQ type flags
Some ARM platforms have the ability to program the interrupt controller to
detect various interrupt edges and/or levels.  For some platforms, this is
critical to setup correctly, particularly those which the setting is dependent
on the device.

Currently, ARM drivers do (eg) the following:

	err = request_irq(irq, ...);

	set_irq_type(irq, IRQT_RISING);

However, if the interrupt has previously been programmed to be level sensitive
(for whatever reason) then this will cause an interrupt storm.

Hence, if we combine set_irq_type() with request_irq(), we can then safely set
the type prior to unmasking the interrupt.  The unfortunate problem is that in
order to support this, these flags need to be visible outside of the ARM
architecture - drivers such as smc91x need these flags and they're
cross-architecture.

Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the
property that the device would like.  The IRQ controller code should do its
best to select the most appropriate supported mode.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:46 -08:00
Russell King
3ae5eaec1d [DRIVER MODEL] Convert platform drivers to use struct platform_driver
This allows us to eliminate the casts in the drivers, and eventually
remove the use of the device_driver function pointer methods for
platform device drivers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09 22:32:44 +00:00
Russell King
d052d1beff Create platform_device.h to contain all the platform device details.
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
Russell King
9480e307cd [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks
In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:56 -07:00
Dmitry Torokhov
3c42f0c3dd [PATCH] drivers/input/keyboard: convert to dynamic input_dev allocation
Input: convert drivers/input/keyboard to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Richard Purdie
414894938b [ARM] 3014/1: Spitz keyboard: Correct the right shift key
Patch from Richard Purdie

Correct the right shift key entry in the spitz keyboard driver.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14 16:07:28 +01:00
Richard Purdie
fff71312e7 [PATCH] SharpSL: Add an input keyboard driver for Zaurus cxx00 series
Add a input driver for the keyboard found on the Zaurus Cxx00 series (Spitz,
Akita, Borzoi).  Its based on corgikbd but there are enough subtle differences
to justify a separate driver.

Signed-Off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:31 -07:00