Commit graph

311 commits

Author SHA1 Message Date
Tony Luck
288ceb8f14 Auto-update from upstream 2005-08-30 09:30:09 -07:00
Tony Luck
3290580285 Pull rationalise-regions into release branch 2005-08-29 15:50:32 -07:00
Tony Luck
bcdd3a9114 Pull ngam-maule-steiner into release branch 2005-08-29 15:48:51 -07:00
Tony Luck
b946ecbb11 Pull pending-2.6.14 into release branch 2005-08-29 15:48:23 -07:00
Tony Luck
7115c13bd6 Pull acpi-p-state into release branch 2005-08-29 14:15:10 -07:00
Tony Luck
7d2e423add Pull asm-segment into release branch 2005-08-29 14:14:40 -07:00
Tony Luck
3ec8a773d2 Pull swiotlb-size into release branch 2005-08-29 14:14:18 -07:00
Len Brown
27a639a92d Auto-update from upstream 2005-08-29 17:02:17 -04:00
Steven Rostedt
69be8f1896 [PATCH] convert signal handling of NODEFER to act like other Unix boxes.
It has been reported that the way Linux handles NODEFER for signals is
not consistent with the way other Unix boxes handle it.  I've written a
program to test the behavior of how this flag affects signals and had
several reports from people who ran this on various Unix boxes,
confirming that Linux seems to be unique on the way this is handled.

The way NODEFER affects signals on other Unix boxes is as follows:

1) If NODEFER is set, other signals in sa_mask are still blocked.

2) If NODEFER is set and the signal is in sa_mask, then the signal is
still blocked. (Note: this is the behavior of all tested but Linux _and_
NetBSD 2.0 *).

The way NODEFER affects signals on Linux:

1) If NODEFER is set, other signals are _not_ blocked regardless of
sa_mask (Even NetBSD doesn't do this).

2) If NODEFER is set and the signal is in sa_mask, then the signal being
handled is not blocked.

The patch converts signal handling in all current Linux architectures to
the way most Unix boxes work.

Unix boxes that were tested:  DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU
3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX.

* NetBSD was the only other Unix to behave like Linux on point #2. The
main concern was brought up by point #1 which even NetBSD isn't like
Linux.  So with this patch, we leave NetBSD as the lonely one that
behaves differently here with #2.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29 10:03:11 -07:00
Kenneth Chen
f8220c7f15 [IA64] Delete erroneous copy_page.o in global lib-y list
copy_page.o appeared twice in arch/ia64/lib/Makefile. The
one in global lib-y is wrong where it should be just in
lib-$(CONFIG_ITANIUM).

Both copy_page.o and copy_page_mck.o are build for Itanium2
processor and the link order will pick up the low performing
copy_page function (originally written for itanium processor).
In this case, we really want the copy_page_mck.o for optimized
version.

Signed-off-by: Kenneth Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-26 16:01:25 -07:00
Venkatesh Pallipadi
4db8699bcf [IA64] Add ACPI based P-state support
Patch to support P-state transitions on ia64. This driver is based on ACPI,
and uses the ACPI processor driver interface to find out the P-state support
information for the processor. This driver plugs into generic cpufreq
infrastructure.

Once this driver is loaded successfully, ondemand/userspace governor can be
used to change the CPU frequency dynamically based on load or on request from
userspace process.

Refer :
ACPI specification -
      http://www.acpi.info
P-state related PAL calls -
      http://developer.intel.com/design/itanium/downloads/24869909.pdf

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-26 15:09:24 -07:00
Russ Anderson
d1e079b3fc [IA64-SGI] fix bte_copy() calling smp_processor_id() while preemptible
bte_copy() calls calls smp_processor_id(), which will get flagged if
preemption if enabled.  raw_smp_processor_id() is used instead 
because we are just using it to pick a BTE interface and are not 
tied to a specific cpu.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-26 15:01:37 -07:00
Mark Maule
8409668b56 [IA64] altix: Abstract irq_affinity at the sn pci provider
Altix patch to abstract irq_affinity down to the pci provider level since
different SGI hardware implements this in different ways.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-26 12:09:01 -07:00
Len Brown
09d4a80e66 Merge HEAD from ../from-linus 2005-08-25 12:45:49 -04:00
Len Brown
d0d59b98d7 [IA64] fix allnoconfig build
cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25 12:42:52 -04:00
Len Brown
6153df7b2f [ACPI] delete CONFIG_ACPI_PCI
Delete the ability to build an ACPI kernel that does
not include PCI support.  When such a machine is created
and it requires a tuned kernel, send a patch.

http://bugzilla.kernel.org/show_bug.cgi?id=1364

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25 12:40:44 -04:00
Len Brown
eb7b6b3264 [ACPI] IA64-related ACPI Kconfig fixes
Build issues were mostly in the ACPI=n case -- don't do that.
Select ACPI from IA64_GENERIC.
Add some missing dependencies on ACPI.

Mark BLACKLIST_YEAR and some laptop-only ACPI drivers
as X86-only.  Let me know when you get an IA64 Laptop.

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25 12:14:20 -04:00
Russ Anderson
5b9021bc58 [IA64] SGI SN remove redundant partition SAL call
Clean up of SGI SN partitioning related code.
The SN_SAL_GET_SN_INFO SAL call returns the partition ID, making
the SN_SAL_SYSCTL_PARTITION_GET SAL call redundant.  Remove sn_partid
and use sn_partition_id.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 16:26:13 -07:00
Mark Goodwin
5390970d1c [IA64] - SGI SN hwperf enhancements -
Update the SN pci device info to use the nearest node function
to allocate driver memory on the nearest node (rather than
defaulting to node 0).

Signed-off-by: Mark Goodwin <markgw@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 16:25:21 -07:00
Mark Goodwin
60a3ba0bb4 [IA64] - SGI SN hwperf enhancements -
Add a new exported function for determining the nearest node
with CPUs for I/O nodes and fix a bug where the hwperf dynamic
misc device was being registered before misc_init(). 

Signed-off-by: Mark Goodwin <markgw@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 16:24:42 -07:00
Mark Goodwin
ecc3c30ae3 [IA64] - SGI SN hwperf enhancements - export_pci_topology
Bugfix to export PCI topology information in /proc/sgi_sn/sn_topology.

Signed-off-by: Mark Goodwin <markgw@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 16:23:39 -07:00
Peter Chubb
0a41e25011 [IA64] Rationalise Region Definitions
Currently, region numbers are defined in several files, with several 
names.  For example, we have REGION_KERNEL in asm/page.h and 
RGN_KERNEL in pgtable.h 
 
We also have address definitions that should depend on the 
RGN_XXX macros, but are currently just long constants. 
 
The following patch reorganises all the definitions so that they have 
the same form (RGN_XXX), are in one place, and that addresses that 
depend on RGN_XXX are derived from them. 

(This is a necessary but not sufficient patch to allow UML-like 
operation on IA64). 

Thanks to David Mosberger for catching the change I missed in mmu_context.h.
 
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> 
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 15:35:41 -07:00
Adrian Bunk
38d26b9f57 [IA64] arch/ia64/hp/sim/boot/fw-emu.c: remove egcs workaround
Kernel 2.6 doesn't support egcs, and I didn't find any user of this 
function.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 14:50:37 -07:00
Kumar Gala
a877bd36f7 [IA64] remove use of asm/segment.h
Removed IA64 architecture specific users of asm/segment.h
The removal of asm-ia64/segment.h itself can wait until all
of the kernel source has been purged of references.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 13:23:30 -07:00
Keith Owens
41290c1464 [PATCH] Export pcibios_bus_to_resource
pcibios_bus_to_resource is exported on all architectures except ia64
and sparc.  Add exports for the two missing architectures.  Needed when
Yenta socket support is compiled as a module.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-24 10:22:44 -07:00
Len Brown
76f5858482 [ACPI] delete CONFIG_ACPI_BUS
it is a synonym for CONFIG_ACPI

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24 12:11:34 -04:00
Len Brown
8466361ad5 [ACPI] delete CONFIG_ACPI_INTERPRETER
it is a synonym for CONFIG_ACPI

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24 12:10:43 -04:00
Len Brown
888ba6c62b [ACPI] delete CONFIG_ACPI_BOOT
it has been a synonym for CONFIG_ACPI since 2.6.12

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24 12:08:54 -04:00
Len Brown
84ffa74752 Merge from-linus to-akpm 2005-08-23 22:12:23 -04:00
Peter Chubb
a4cce10492 [IA64] Fix simulator boot (for real this time).
Thanks to Stephane, we've now worked out the real cause of the
`Linux  will not boot on simulator' problem.  Turns out it's a stack
overflow because the stack pointer wasn't being initialised properly
in boot_head.S (it was being initialised to the lowest instead of the
highest address of the stack, so the first push started to overwrite
data in the BSS).

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-23 07:41:56 -07:00
Tony Luck
62d75f3753 [IA64] backout incorrect fix for simulator boot issue
Earlier fix in 4aec0fb122 just
masked the real problem.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-23 07:39:15 -07:00
Tony Luck
034e5356a4 Pull prarit-bus-sysdata into release branch 2005-08-23 07:27:28 -07:00
Alex Williamson
e8579e72ca [IA64, X86_64] fix swiotlb sizing
Fix swiotlb sizing to match what the comments and the kernel
parameters documentation indicate.  Given a default 16k page size kernel
(ia64) and a 2k swiotlb page size, we're off by a multiple of 8 trying
to size the swiotlb.  When specified on the boot line, the swiotlb is
made 8x bigger than requested.  When left to the default value, it's 8x
smaller than the comments indicate.  For x86_64 the multiplier would be
2x.  The patch below fixes this.  Now, what's a good default swiotlb
size?  Apparently we don't really need 64MB.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-18 16:33:28 -07:00
Ian Wienand
4aec0fb122 [IA64] Simulator bootloader fails with gcc 4
After building a fresh tree with gcc 4 I can't boot the simulator as
the bootloader loader dies with 

loading /home/ianw/kerntest/kerncomp//build/sim_defconfig/vmlinux...
failed to read phdr

After some investigation I believe this is do with differences between
the alignment of variables on the stack between gcc 3 and 4 and the
ski simulator.  If you trace through with the simulator you can see
that the disk_stat structure value returned from the SSC_WAIT_COMPLETION
call seems to be only half loaded.  I guess it doesn't like the alignment
of the input.

Signed-off-by: Ian Wienand <ianw@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-18 14:10:41 -07:00
Jack Steiner
470ceb05d9 [IA64-SGI] - New SN hardware support - ptc_fixes
Shub2 provides a much improved mechanism for issuing internode
TLB purges. Add code to support the newer mechanism. There is also 
some debug code (disabled) that is useful for testing.

Collect statistics on the number, type & duration of TLB purges.
This data will be useful for making future improvements in the algorithms.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:32:24 -07:00
Jack Steiner
68b9753f47 [IA64-SGI] - New SN hardware support - cpu_relax
Add a few missing calls to "hint @pause".

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:31:53 -07:00
Jack Steiner
7e95b9d6e2 [IA64-SGI] - New SN hardware support - bte_fixes
Change the BTE driver so that it works for both shub1 and
shub2. Most of the changes are related to the number of cores
that use the BTE engine, to the MMR addresses of various
shub registers, and to using the correct processor or network
physical address.

Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:31:14 -07:00
Jack Steiner
1007d02160 [IA64-SGI] - New SN hardware support - no_wars
Disable some shub1-specific code when running on systems with shub2.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:30:44 -07:00
Jack Steiner
2fdbb590e4 [IA64-SGI] - New SN hardware support - boot_init_shub2
Update the addresses of the pio_write_status_addr so that
they are correct for newer processors. Shub2 did not number
the threads in the order that I had expected.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:30:14 -07:00
Jack Steiner
0aa2c72e59 [IA64-SGI] - New SN hardware support - use_alias_space
Use local SHUB alias space when referencing MMRs that are known
to be node local. There is a slight performance benefit & code 
simplification.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:29:43 -07:00
Tony Luck
c149ec05dc [IA64] Updated tiger defconfig
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 10:24:17 -07:00
Peter Chubb
7f09d6f935 [IA64] Updated zx1 defconfig
Just `make oldconfig' doesn't help for the zx1 defconfig ---
because we need the MPT Fusion drivers, which are picked up as not
selected.
Tested on HP ZX2000 and ZX2600.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16 17:34:31 -07:00
Greg Edwards
7b1a843f46 [IA64] Refresh arch/ia64/configs/sn2_defconfig.
Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16 16:26:36 -07:00
Keith Owens
71841b8fe7 [IA64] Initialize some spinlocks
Some IA64 spinlocks are not being initialized, make it so.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16 15:33:26 -07:00
Prarit Bhargava
c1ffb910f7 [IA64]: SN fix bus->sysdata pointer and memory cleanups
The main issue is that bus_fixup calls may potentially call
functions that require a valid bus->sysdata pointer.  Since
this is the case, we must set the bus->sysdata pointer before
calling the bus_fixup functions.  The remaining changes are
simple fixes to make sure memory is cleaned up in the function.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16 15:24:48 -07:00
Tony Luck
f7001e8f1f Auto-update from upstream 2005-08-16 11:29:57 -07:00
John Hawkes
367ae3cd74 [PATCH] fix for ia64 sched-domains code
Fix for ia64 sched domain building triggered by cpuset code.

Acked-by: Nick Piggin <npiggin@suse.de>
Acked-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16 08:54:00 -07:00
MAEDA Naoaki
702c7e7626 [ACPI] fix ia64 build issues resulting from Lindent and merge
Signed-off-by: MAEDA Naoaki <maeda.naoaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Brown, Len <len.brown@intel.com>
2005-08-15 22:26:06 -04:00
Christoph Hellwig
85f265d887 [IA64] update CONFIG_PCI description
The current one doesn't even make sense anymore on i386 where it
apparently came from.

Follow-up wordsmithing by Matthew Wilcox and Tony Luck.


Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-15 15:03:12 -07:00
Mark Maule
c9221da9f2 [IA64-SGI] sn pci provider for TIOCE (pci
Altix patch to add an SN pci provider for TIOCE, which is SGI's 
PCI Express implementation.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-11 15:56:31 -07:00
Mark Maule
5b53ed1f2e [IA64-SGI] add support for TIO huge-window
Altix patch to add TIO "huge-window" address support to sn_dma_flush().

Update copyright in affected files.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-11 15:37:13 -07:00
Mark Maule
735e60f4c6 [IA64-SGI] abstract force_interrupt() mechanism
Altix patch to abstract the force_interrupt() mechanism away from the
pcibr provider.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-11 15:36:39 -07:00
Mark Maule
89963d16dc [IA64-SGI] altix: cosmetic rename of SGI_PCIBR_ERROR
Cosmetic altix patch to rename SGI_PCIBR_ERROR to something more generic and
remove a duplicate #define.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-11 15:36:00 -07:00
Colin Ngam
674c6479b7 [IA64-SGI] Altix only: Add PCI Domain number support.
This patch enables PCI Domain numbering on Altix.

Signed-off-by: Colin Ngam <cngam@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-11 15:35:13 -07:00
Len Brown
95f193aa4f Merge ../to-linus 2005-08-11 00:56:08 -04:00
stephane.eranian@hp.com
6bf11e8c70 [IA64] fix perfmon context load
The PFM_LOAD_CONTEXT may fail silently and cause a session
to remain reserved even though it should not. This can happen
when the commands succeeds in reserving the session but fails
when it actually tries to attach to the load_pid. In that case,
the command has failed but will return 0. More importantly,
the session will remain reserved. This patch fixes the problem.

Signed-off-by: <stephane.eranian@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-10 16:21:58 -07:00
Ken Chen
fb573856b2 [IA64] fix nohalt boot option
this changeset broke the "nohalt" kernel boot option.
  8df5a500a3

default_idle() is looking at new variable can_do_pal_halt.  However,
that variable did not get cleared upon "nohalt" boot option.  Result
is that "nohalt" option is ignored until perfmon is exercised.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-08 15:39:47 -07:00
Len Brown
4be44fcd3b [ACPI] Lindent all ACPI files
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05 00:45:14 -04:00
Len Brown
1d492eb413 [ACPI] Merge acpi-2.6.12 branch into 2.6.13-rc3
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05 00:31:42 -04:00
Kenji Kaneshige
14454a1b3f [ACPI] iosapic_register_intr() now returns error instead of panic
error condition is passed along by acpi_register_gsi().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-04 22:25:48 -04:00
Kenji Kaneshige
1f3a6a1577 [ACPI] acpi_register_gsi() can return error
Current acpi_register_gsi() function has no way to indicate errors to its
callers even though acpi_register_gsi() can fail to register gsi because of
some reasons (out of memory, lack of interrupt vectors, incorrect BIOS, and so
on).  As a result, caller of acpi_register_gsi() cannot handle the case that
acpi_register_gsi() fails.  I think failure of acpi_register_gsi() should be
handled properly.

This series of patches changes acpi_register_gsi() to return negative value on
error, and also changes callers of acpi_register_gsi() to handle failure of
acpi_register_gsi().

This patch changes the type of return value of acpi_register_gsi() from
"unsigned int" to "int" to indicate an error.  If acpi_register_gsi() fails to
register gsi, it returns negative value.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-04 22:12:08 -04:00
Ingo Molnar
6cb54819d7 [PATCH] remove sys_set_zone_reclaim()
This removes sys_set_zone_reclaim() for now.  While i'm sure Martin is
trying to solve a real problem, we must not hard-code an incomplete and
insufficient approach into a syscall, because syscalls are pretty much
for eternity.  I am quite strongly convinced that this syscall must not
hit v2.6.13 in its current form.

Firstly, the syscall lacks basic syscall design: e.g. it allows the
global setting of VM policy for unprivileged users. (!) [ Imagine an
Oracle installation and a SAP installation on the same NUMA box fighting
over the 'optimal' setting for this flag. What will they do? Will they
try to set the flag to their own preferred value every second or so? ]

Secondly, it was added based on a single datapoint from Martin:

 http://marc.theaimsgroup.com/?l=linux-mm&m=111763597218177&w=2

where Martin characterizes the numbers the following way:

 ' Run-to-run variability for "make -j" is huge, so these numbers aren't
   terribly useful except to see that with reclaim the benchmark still
   finishes in a reasonable amount of time. '

in other words: the fundamental problem has likely not been solved, only
a tendential move into the right direction has been observed, and a
handful of numbers were picked out of a set of hugely variable results,
without showing the variability data. How much variance is there
run-to-run?

I'd really suggest to first walk the walk and see what's needed to get
stable & predictable kernel compilation numbers on that NUMA box, before
adding random syscalls to tune a particular aspect of the VM ... which
approach might not even matter once the whole picture has been analyzed
and understood!

The third, most important point is that the syscall exposes VM tuning
internals in a completely unstructured way. What sense does it make to
have a _GLOBAL_ per-node setting for 'should we go to another node for
reclaim'? If then it might make sense to do this per-app, via numalib or
so.

The change is minimalistic in that it doesnt remove the syscall and the
underlying infrastructure changes, only the user-visible changes.  We
could perhaps add a CAP_SYS_ADMIN-only sysctl for this hack, a'ka
/proc/sys/vm/swappiness, but even that looks quite counterproductive
when the generic approach is that we are trying to reduce the number of
external factors in the VM balance picture.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 10:03:56 -07:00
Keith Owens
b833961bd3 [IA64] unwind.c uses wrong unat from switch_stack
unwind.c can read the wrong unat bits from switch_stack.
sw->caller_unat is the value of ar.unat when the task was blocked.
sw->ar_unat is the value of ar.unat after doing st8.spill for r4-7.
IOW, ar_unat is caller_unat with 4 bits changed.

unw_access_gr() uses sw->ar_unat for r4-7 (correct), but it also uses
sw->ar_unat for other scratch registers (incorrect).  sw->ar_unat
should only be used for r4-7, everything else should use
sw->caller_unat, unless modified by unwind info.  Using sw->ar_unat
risks picking up the 4 bits that were overwritten when r4-7 were saved.

Also this line is wrong
	unw.sw_off[unw.preg_index[UNW_REG_PFS]] = SW(AR_UNAT);
and should be
	unw.sw_off[unw.preg_index[UNW_REG_PFS]] = SW(AR_PFS);

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-27 14:18:08 -07:00
Robert Love
d108919b2b [IA64] inotify: ia64 syscalls.
Attached patch adds the inotify syscalls to ia64.

Signed-off-by: Robert Love <rml@novell.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-27 10:46:12 -07:00
Steven Rostedt
d46523ea32 [PATCH] fix MAX_USER_RT_PRIO and MAX_RT_PRIO
Here's the patch again to fix the code to handle if the values between
MAX_USER_RT_PRIO and MAX_RT_PRIO are different.

Without this patch, an SMP system will crash if the values are
different.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 15:40:00 -07:00
Eric W. Biederman
59586e5a26 [PATCH] Don't export machine_restart, machine_halt, or machine_power_off.
machine_restart, machine_halt and machine_power_off are machine
specific hooks deep into the reboot logic, that modules
have no business messing with.  Usually code should be calling
kernel_restart, kernel_halt, kernel_power_off, or
emergency_restart. So don't export machine_restart,
machine_halt, and machine_power_off so we can catch buggy users.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:42 -07:00
Ian Wienand
46906c4415 [IA64] Fix undefined reference to can_cpei_retarget for simulator
The simulator build doesn't turn on ACPI, so doesn't have a definition
of can_cpei_retarget.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-14 09:21:47 -07:00
Tony Luck
99ad25a313 Auto merge with /home/aegl/GIT/linus 2005-07-13 12:15:43 -07:00
Dean Nelson
59a0a8aa6a [IA64] fix call of smp_processor_id() by XPC while
XPC calls smp_processor_id() twice from xpc_setup_infrastructure() with
preemption enabled, which gets flagged if 'DEBUG_PREEMPT=y'. This patch
replaces the two calls to smp_processor_id() by a single call to
raw_smp_processor_id() since any CPU within the partition will do.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-13 11:52:45 -07:00
Christoph Lameter
7c2a6c62c0 [IA64] Altix pcibus_to_node implementation
The Altix subarch does not provide node information via ACPI. Instead hooks
are used to fixup pci structures. This patch determines the nodes for Altix
PCI busses.

Remote Bridges:
---------------
Altix supports remote I/O nodes without memory or processors but with bridges.
The TIOCA type of bridge is an AGP bridge and the PROM provides information
about the closest node. That information will be returned by pcibus_to_node.

The TIOCP remote bridge type is a PCI bridge but the PROM does not provide a
closest node id. pcibus_to_node will return -1 for devices on those bridges
meaning that device control structures may be allocated on any node.

Safeguard:
----------
Should the fixups result in invalid node information for a pci controller then
a warning will be printed and pcibus_to_node will return -1.


This patch also fixes the "FIXME" in sn_dma_alloc_coherent. This means that
dma_alloc_coherent will now use alloc_pages_node to allocate memory local to
the node that the PCI device is connected to.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12 16:12:55 -07:00
Zoltan Menyhart
08357f82d4 [IA64] improve flush_icache_range()
Check with PAL to see what the i-cache line size is for
each level of the cache, and so use the correct stride
when flushing the cache.

Acked-by: David Mosberger
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12 15:33:18 -07:00
Len Brown
5028770a42 [ACPI] merge acpi-2.6.12 branch into latest Linux 2.6.13-rc...
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 17:21:56 -04:00
Greg Edwards
60a762b6a6 [IA64] remove CONFIG_IA64_SGI_SN_SIM
This patch removes the CONFIG_IA64_SGI_SN_SIM option entirely, allowing
any kernel bootable on sn2 to also be booted in the simulator.

Boot tested on Altix and HP rx2600.

Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12 14:13:08 -07:00
Linus Torvalds
9ffc7a0ebf Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2005-07-12 13:16:40 -07:00
Christoph Lameter
514604c6d1 [IA64] pcibus_to_node implementation for IA64
pcibus_to_node provides a way for the Linux kernel to identify to which
node a certain pcibus connects to. Allocations of control structures
for devices can then be made on the node where the pci bus is located
to allow local access during interrupt and other device manipulation.

This patch provides a new "node" field in the the pci_controller
structure. The node field will be set based on ACPI information (thanks
to Alex Williamson  <alex.williamson@hp.com for that piece).

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12 11:04:22 -07:00
Venkatesh Pallipadi
6c4fa56033 [ACPI] fix C1 patch for IA64
http://bugzilla.kernel.org/show_bug.cgi?id=4233

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 00:10:20 -04:00
Sam Ravnborg
d5950b4355 [NET]: add a top-level Networking menu to *config
Create a new top-level menu named "Networking" thus moving
net related options and protocol selection way from the drivers
menu and up on the top-level where they belong.

To implement this all architectures has to source "net/Kconfig" before
drivers/*/Kconfig in their Kconfig file. This change has been
implemented for all architectures.

Device drivers for ordinary NIC's are still to be found
in the Device Drivers section, but Bluetooth, IrDA and ax25
are located with their corresponding menu entries under the new
networking menu item.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 21:03:49 -07:00
Ashok Raj
55e59c511c [ACPI] Evaluate CPEI Processor Override flag
ACPI 3.0 added a Correctable Platform Error Interrupt (CPEI)
Processor Overide flag to MADT.Platform_Interrupt_Source.
Record the processor that was provided as hint from ACPI.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 00:01:41 -04:00
Kenji Kaneshige
3b5cc09033 [IA64] assign_irq_vector() should not panic
Current assign_irq_vector() will panic if interrupt vectors is running
out. But I think how to handle the case of lack of interrupt vectors
should be handled by the caller of this function. For example, some
PCI devices can raise the interrupt signal via both MSI and I/O
APIC. So even if the driver for these device fails to allocate a
vector for MSI, the driver still has a chance to use I/O APIC based
interrupt. But currently there is no chance for these driver to use
I/O APIC based interrupt because kernel will panic when
assign_irq_vector() fails to allocate interrupt vector.

The following patch changes assign_irq_vector() for ia64 to return
-ENOSPC on error instead of panic (as i386 and x86_64 versions do).

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11 10:30:07 -07:00
Nishanth Aravamudan
699139279d [IA64] use msleep_interruptible() instead of schedule_timeout
Description: Replace schedule_timeout() with msleep_interruptible() to
guarantee the task delays as expected.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11 10:26:40 -07:00
Olaf Hering
d0feafbf14 [IA64] remove linux/version.h include from arch/ia64
changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11 09:58:52 -07:00
H. J. Lu
763b3917e7 [IA64] Fix a typo in arch/ia64/kernel/entry.S
Both 2.4 and 2.6 kernels need this patch for the next binutils.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-08 13:23:49 -07:00
Jack Steiner
21517a57e8 [IA64] - Disable tiocx driver on non-SN systems
Disable the tiocx driver on non-SN systems.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-07 09:52:59 -07:00
Tony Luck
8d7e35174d [IA64] fix generic/up builds
Jesse Barnes provided the original version of this patch months ago, but
other changes kept conflicting with it, so it got deferred.  Greg Edwards
dug it out of obscurity just over a week ago, and almost immediately
another conflicting patch appeared (Bob Picco's memory-less nodes).

I've resolved the conflicts and got it running again.  CONFIG_SGI_TIOCX
is set to "y" in defconfig, which causes a Tiger to not boot (oops in
tiocx_init).  But that can be resolved later ... get this in now before it
gets stale again.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 18:18:10 -07:00
bob.picco
564601a5d1 [IA64] memory-less-nodes repost
I reworked how nodes with only CPUs are treated.  The patch below seems
simpler to me and has eliminated the complicated routine
reassign_cpu_only_nodes.  There isn't any longer the requirement
to modify ACPI NUMA information which was in large part the
complexity introduced in reassign_cpu_only_nodes. 

This patch will produce a different number of nodes. For example,
reassign_cpu_only_nodes would reduce two CPUonly nodes and one memory node
configuration to one memory+CPUs node configuration.  This patch
doesn't change the number of nodes which means the user will see three.  Two
nodes without memory and one node with all the memory.

While doing this patch, I noticed that early_nr_phys_cpus_node isn't serving
any useful purpose.  It is called once in find_pernode_space but the value
isn't used to computer pernode space.  

Signed-off-by: bob.picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:45:30 -07:00
af25e94d4d [IA64] Make ia64 die() preempt safe
Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:44:55 -07:00
Tony Luck
67d340f440 Auto merge with /home/aegl/GIT/linus 2005-07-06 15:35:18 -07:00
Keith Owens
2ba3e3e65c [IA64] restore_sigcontext is not preempt safe
restore_sigcontext calls ia64_set_local_fpu_owner() which requires that
preempt be disabled.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:31:15 -07:00
Prarit Bhargava
6f354b014b [IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver code
This patch is the SGI hotplug driver and additional changes required for
the driver.  These modifications include changes to the SN io_init.c code
for memory management, the inclusion of new SAL calls to enable and disable
PCI slots, and a hotplug-style driver.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:29:53 -07:00
Prarit Bhargava
283c7f6ac6 [IA64] hotplug/ia64: SN Hotplug Driver - new SN PROM version code
This patch is a rewrite of the code to check the PROM version.  The current
code has some deficiences in the way PROM comparisons were made.  The minimum
value of PROM that will boot has also been changed to 4.04.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:29:13 -07:00
Prarit Bhargava
c13cf3714f [IA64] hotplug/ia64: SN Hotplug Driver: moving of header files
This patch moves header files out of the arch/ia64/sn directories and into
include/asm-ia64/sn.  These files were being included by other subsystems
and should be under include/asm-ia64/sn.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:26:51 -07:00
Prarit Bhargava
cb4cb2cb9b [IA64] hotplug/ia64: SN Hotplug Driver: SN IRQ Fixes
This patch  fixes the SN IRQ code such that cpu affinity and
Hotplug can modify IRQ values.  The sn_irq_info structures are now locked
using a RCU lock mechanism to avoid lock contention in the lost interrupt
WAR code.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 14:59:44 -07:00
Rusty Lynch
6772926bef [PATCH] kprobes: fix namespace problem and sparc64 build
The following renames arch_init, a kprobes function for performing any
architecture specific initialization, to arch_init_kprobes in order to
cleanup the namespace.

Also, this patch adds arch_init_kprobes to sparc64 to fix the sparc64 kprobes
build from the last return probe patch.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:19:00 -07:00
Tony Luck
0647d8cfd4 [IA64] Update zx1_defconfig
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-29 16:01:40 -07:00
Tony Luck
06697eea4c [IA64] Update tiger_defconfig
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-29 15:45:41 -07:00
Tony Luck
d18bfacff2 Auto merge with /home/aegl/GIT/linus 2005-06-29 15:21:41 -07:00
Peter Chubb
a68db763af [IA64] Fix another IA64 preemption problem
There's another problem shown up by Ingo's recent patch to make
smp_processor_id() complain if it's called with preemption enabled.
local_finish_flush_tlb_mm() calls activate_context() in a situation
where it could be rescheduled to another processor.  This patch
disables preemption around the call.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 10:01:19 -07:00
David Mosberger-Tang
819c67e69c [IA64] Replace stale KDB-code with useful MAGIC_SYSRQ code in simserial.c
Patch makes it possible to use the "F4" function key to do
magic sysrq in the HP Ski simulator.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:58:29 -07:00
Bruce Losure
c1ffb6a8aa [IA64-SGI] Altix patch to tiocx, add subsys_initcall
This patch fixes an ordering issue between the init code for the
tiocx bus driver and tiocx-related device drivers.   Also adds
a new brick to the list of known FPGA bricks.

Signed-off-by: Bruce Losure <blosure@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:53:42 -07:00
Prarit Bhargava
92a582ed27 [IA64] sparse cleanup of TIOCA files
This patch is a sparse compile cleanup of tioca_provider.c, sn_hwperf.h, and
tioca_provider.h.  Each of these files had sparse warnings when
compiled.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:50:48 -07:00