Commit graph

122 commits

Author SHA1 Message Date
Hirokazu Takata
ad09d58310 [PATCH] m32r: M3A-2170(Mappi-III) IDE support
This patch is for supporting IDE interface for M3A-2170(Mappi-III) board.

Signed-off-by: Mamoru Sakugawa <sakugawa@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-28 14:42:24 -08:00
Dominik Brodowski
807277cbf9 [PCMCIA] inform user of insertion and ejection events
Print out minimal information in dmesg whnever a CardBus or PCMCIA card
is inserted into or ejected from a slot. This will make debugging certain
types of bugs much easier, and is similar to output produced by other
hotpluggable buses.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-12 23:35:34 +01:00
Dominik Brodowski
dfb279c975 [PCMCIA] i82365: use new platform_device helpers
Use the new platform_device helpers in the i82365 driver to get rid of the
"device 'i823650' does not have a release() function" warning, and to solve
bug #3676.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-12 22:46:38 +01:00
Igor Popik
a2932b35a0 [PCMCIA] i82365: release all resources if no devices are found
The i82365 driver does not release all the resources when the device is not
found. This can cause an oops when reading /proc/ioports after module
unload.

Signed-off-by: Igor Popik <igor.popik@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-10 11:42:16 +01:00
Marcelo Tosatti
e346315088 [PCMCIA] MPC8xx PCMCIA update
Kconfig entry: dependency on 8xx
Makefile: fix whitespace breakage
m8xx_pcmcia.c:
	- asm/segment.h is gone
	- use generic PCMCIA suspend/resume methods

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-10 11:19:58 +01:00
Ralf Baechle
5ab0b37494 [PATCH] Alchemy PCMCIA: Fix config.h inclusion
Add rsp. remove the inclusion of <linux/config.h> as needed.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-10 11:18:26 +01:00
Olaf Hering
733482e445 [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reason
This patch removes almost all inclusions of linux/version.h.  The 3
#defines are unused in most of the touched files.

A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is
unfortunatly in linux/version.h.

There are also lots of #ifdef for long obsolete kernels, this was not
touched.  In a few places, the linux/version.h include was move to where
the LINUX_VERSION_CODE was used.

quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'`

search pattern:
/UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:57 -08:00
Richard Purdie
a63ae4427c [ARM] 3093/1: SharpSL PCMCIA Updates for Cxx00 models
Patch from Richard Purdie

The Sharp SL-Cxx00 models have a combined power control for the SD
and CF slot 0. This patch adds hooks to the scoop driver to allow
machines to provide a custom control function for this and such a
function is added for spitz/akita/borzoi.

It also moves the gpio init code into the machine files as this
is machine dependent and differs between some models. A couple of
warnings when compiling for collie are also fixed.

Signed-off-by: Richard Purdie
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-08 19:15:43 +00:00
Jesper Juhl
6044ec8882 [PATCH] kfree cleanup: misc remaining drivers
This is the remaining misc drivers/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in misc files in
drivers/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Acked-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Len Brown <len.brown@intel.com>
Acked-by: "Antonino A. Daplas" <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:54:05 -08:00
Linus Torvalds
4fd5f8267d Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31 07:32:56 -08:00
Paul Mackerras
23fd07750a Merge ../linux-2.6 by hand 2005-10-31 13:37:12 +11:00
Linus Torvalds
1480d0a31d Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-10-30 17:48:00 -08:00
Brian Gerst
0d078f6f96 [PATCH] CONFIG_IA32
Add CONFIG_X86_32 for i386.  This allows selecting options that only apply
to 32-bit systems.

(X86 && !X86_64) becomes X86_32
(X86 ||  X86_64) becomes X86

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:10 -08:00
Pavel Machek
77bb86a1b9 [ARM] Support pcmcia slot on sharp sl-5500
This adds support for pcmcia slot on sharp zaurus sl-5500.
pxa2xx_sharpsl.c thus becomes quite miss-named, but I guess that
is not worth fixing?

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30 23:39:02 +00:00
Pete Popov
d6460827af Updated pcmcia driver with pb1200 and db1200 support.
Updated db1200_defconfig so pcmcia is enabled by default.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:24 +01:00
Pete Popov
efe29c0f34 - moved platform structure to platform.c
- fixed an iounmap warning
- export fixup_xx, needed by the module

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:24 +01:00
Russell King
d052d1beff Create platform_device.h to contain all the platform device details.
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
Marcelo Tosatti
de957c89b7 [PATCH] MPC8xx PCMCIA driver
Here is an uptodated version of the MPC8xx PCMCIA driver for v2.6,
addressing comments by Jeff and Dominik:

- use IO accessors instead of direct device memory referencing
- avoid usage of non-standard "uint/uchar" data types
- kill struct typedef's

Will submit it for inclusion once v2.6.14 is out.

Testing on 8xx platforms is more than welcome! Works like a charm
on our custom hardware (CONFIG_PRxK).

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 13:55:35 +10:00
Linus Torvalds
030ee39c0f pcmcia: add socket register data to sysfs for yenta devices
It's simple, and it's a good debugging aid.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 13:55:08 -07:00
Greg KH
6fbfddcb52 Merge ../bleed-2.6 2005-10-28 10:13:16 -07:00
Russell King
9480e307cd [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks
In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:56 -07:00
Dmitry Torokhov
d8539d81ae [PATCH] Driver core: pass interface to class interface methods
Driver core: pass interface to class intreface methods

Pass interface as argument to add() and remove() class interface
methods. This way a subsystem can implement generic add/remove
handlers and then call interface-specific ones.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:51 -07:00
Russell King
f339ab3d6c [ARM] Fix sparse warnings
Fix sparse warnings in arch/arm/kernel/module.c,
arch/arm/mm/consistent.c, drivers/pcmcia/sa1111_generic.c,
and platform support files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 14:29:43 +01:00
Pavel Machek
4846d0172d [PATCH] zaurus: fix soc_common.c
This fixes wrong comments, non-working debug subsystem, and some
potentially dangerous macros.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:12 -07:00
Steven Rostedt
220ec02911 [PATCH] pcmcia: fix task state at pccard thread exit
The pccardd thread has a race in it that it can shutdown in the
TASK_INTERRUPTIBLE state.

Make sure we mark ourselves runnable again as we remove ourselves from
the wait queue.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 08:33:27 -07:00
David Vrabel
c2059b2e0b [PATCH] yenta: fix build if YENTA && !CARDBUS
(struct pcmcia_socket).tune_bridge only exists if CONFIG_CARDBUS is set
but building yenta_socket without CardBus is valid.

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 14:53:31 -07:00
Linus Torvalds
1dd465cac8 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-09-30 08:39:56 -07:00
Russell King
fc611a1a50 [ARM] Don't include mach-types.h unnecessarily
It's pointless to include mach-types.h if you're not going to use
anything from it.  These references were removed as a result of:

grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-29 11:15:51 +01:00
Dominik Brodowski
54bb5675a6 [PATCH] pcmcia: only start up nonstatic sockets if both mem and io are available
Only start up nonstatic sockets if both IO and MEM resources are available.
Thanks to Russell King and Matthew Wilcox for tracking this down.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-28 20:11:30 +02:00
Dominik Brodowski
1146bc743e [PATCH] pcmcia: allow one port excludes
Allow for excluding only one port in /etc/pcmcia/config.otps

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-28 20:11:26 +02:00
Daniel Ritz
f9cb8b71e7 [PATCH] yenta: more ENE bridges
Adds better support for the CB-710, CB-712, CB-720 and CB-722 bridges from EnE

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:29 +02:00
Daniel Ritz
6c1a10dba9 [PATCH] yenta: add support for more TI bridges
Support some more TI cardbus bridges.  most of them are multifunction
devices which adds 1394 controllers, smartcard readers etc.  this could
also help with the various problems with the XX21 controllers seen on the
linux-pcmcia list.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:27 +02:00
Komuro
81000808b6 [PATCH] pcmcia: fix Kconfig dependency
TCIC depends on ISA.  It is used with ISA-bus system only.

Signed-off-by: komurojun-mbn@nifty.com
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:26 +02:00
Dominik Brodowski
8e5d17ebe4 [PATCH] yenta: tiny cleanup
pci_set_power_state is not needed, as we call pci_enable_device() somewhere
else.  Also, the resource we write to PCI_BASE_ADDRESS_0 needs to be converted
to bus-centric view first.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:25 +02:00
Daniel Ritz
a413c09094 [PATCH] yenta: don't mess with bridge control register
In interrupt probing (both ISA and PCI) the bridge control register is used
to change interrupt routing to ISA or PCI by changing bit 7.  But this bit
only controls the routing of card functional interrupts, not the CSC
interrupts which are used for interrupt probing.

A bad side effect of messing with this register in yenta_probe_irq() is
that it can lead to irq storms if a card is inserted and already powered by
the BIOS.

Usage in yenta_sock_init() and yenta_config_init() seem to be fishy as well.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:24 +02:00
Daniel Ritz
8c3520d4eb [PATCH] yenta: auto-tune EnE bridges for CardBus cards
Echo Audio cardbus products are known to be incompatible with EnE bridges.
in order to maybe solve the problem a EnE specific test bit has to be set,
another cleared...but other setups have a good chance to break when just
forcing the bits.  so do the whole thingy automatically.

The patch adds a hook in cb_alloc() that allows special tuning for the
different chipsets.  for ene just match the Echo products and set/clear the
test bits, defaults to do the same thing as w/o the patch to not break
working setups.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:09:20 +02:00
Linus Torvalds
5a23f34798 Fix yenta error message when unable to find a bus assignment
And mention 'pci=assign-busses' as a possible fix.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-14 13:05:17 -07:00
Ivan Kokshaysky
c7fb0b35ad [PATCH] yenta oops fix
In some cases, especially on modern laptops with a lot of PCI and
cardbus bridges, we're unable to assign correct secondary/subordinate
bus numbers to all cardbus bridges due to BIOS limitations unless
we are using "pci=assign-busses" boot option.
So some cardbus controllers may not have attached subordinate pci_bus
structure, and yenta driver must cope with it - just ignore such cardbus
bridges.

For example, see https://bugzilla.novell.com/show_bug.cgi?id=113778

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-14 12:28:15 -07:00
Dominik Brodowski
c352ec8ab8 [PATCH] pcmcia: warn on IOCTL usage
More visible user information of scheduled feature removal.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:27 -07:00
Brice Goglin
bd65a68574 [PATCH] pcmcia: add pcmcia to IRQ information
Add a devname parameter to the pcmcia_device structure, fills it with
"pcmcia<bus_id>" in pcmcia_device_add, and passes it to request_irq in
pcmcia_request_irq.

Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:48 -07:00
David Brownell
f74e48a51c [PATCH] pcmcia: OMAP CF controller
This adds a socket driver for the OMAP CF controller; it's currently in use on
OSK boards.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:48 -07:00
Dominik Brodowski
71ed90d89e [PATCH] pcmcia: remove unused Vpp1, Vpp2 and Vcc
config_t->Vpp1, Vpp2 and Vcc are never read, so remove them.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:48 -07:00
Dominik Brodowski
76d82ec526 [PATCH] pcmcia: remove unused client_t
client_t and CLIENT_MAGIC are unused, so remove them

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:47 -07:00
Daniel Ritz
c8751e4c0b [PATCH] pcmcia/yenta: avoid PCI write posting problem
extend cb_writel(), exca_writeb(), exca_writel() to do a read[lb]() after
the write[lb]() to avoid possible problem with PCI write posting.

Seems to fix Bug #5061.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:47 -07:00
Daniel Ritz
c181e0e00f [PATCH] fix pcmcia_request_irq() for multifunction card
multifunction cards need to have the same irq assigned to both functions.
the code tries that but fails because ret is still set to CS_IN_USE which
results in the function having the CB irq assigned.  yenta_set_socket then
just changes the irq routing to use the PCI interrupt but the first
functions irq handler is registered on an ISA interrupt.  boom.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:47 -07:00
Daniel Ritz
bf4de6f2db [PATCH] pcmcia/cs: fix possible missed wakeup
- thread_done should only be completed when the wait_queue is installed.

- all wake up conditions should be checked before schedule()

this fixes a hang of rmmod in the sequence modprobe yenta_socket; rmmod
yenta_socket as reported by Andreas Steinmetz.  w/o this rmmod yenta_socket
can hang on wait_for_completion() in pcmcia_unregister_socket()

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:47 -07:00
Dominik Brodowski
b3743fa444 [PATCH] yenta: share code with PCI core
Share code between setup-bus.c and yenta_socket.c: use the write-out code of
resources to the bridge also in yenta_socket.c, as it provides useful debug
output.  In addition, it fixes the bug that the CPU-centric resource view
might need to be transferred to the PCI-centric view: setup-bus.c does that,
while yenta-socket.c did not.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:47 -07:00
Ingo Molnar
76fa82fb71 [PATCH] pcmcia: reduce ds.c stack footprint
This patch reduces the stack footprint of pcmcia_device_query() from 416 bytes
to 36 bytes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:46 -07:00
Daniel Ritz
ea2f1590aa [PATCH] yenta: make ToPIC95 bridges work with 16bit cards
ToPIC95 brides (and maybe some other too) require to use the ExCA registers
to power up the socket if a 16bit card is pluged.  allow socket drivers to
set a flag so that yenta does just that.  also clean up yenta_get_status()
a bit to use the new yenta_get_power() function.

Side note: ToPIC97 bridges (at least in Rev.5 i have) don't require this.

Ryan Underwood <nemesis-lists@icequake.net> said:

 According to the mail that David Hinds received from a Toshiba engineer,
 ToPIC95 and 97 do require this, and ToPIC100 does not.  Maybe you have a
 later revision.

 For all chips, 16-bit cards can be enabled through ExCA.  So doesn't it
 make sense just to make this the default behavior for all Toshiba chips,
 to avoid corner cases showing up later?

Daniel responded:

 I disagree with ryan to change anything for topic97 bridges.  they work.
 and I couldn't find (read google) any report of a topic97 breaking on
 applying power with the CB registers.

 I'm having several toshba notebooks at work (and home) with topic95,97,100
 bridges.  Only the ones with a topic95 didn't work.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:21 -07:00
Richard Purdie
0ce7625f3c [ARM] 2882/1: pxa2xx_sharpsl: Update PCMCIA driver to support variety of new hardware
Patch from Richard Purdie

This patch updates the PCMCIA pxa2xx_sharpsl driver to support multiple scoop
devices by adding a scoop to pcmcia slot mapping structure. It adds platform
support for poodle, is known to work on spitz (which is dual slot) and
should also support collie with a minor amount of further work.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-05 20:49:54 +01:00