Commit graph

16 commits

Author SHA1 Message Date
Darrick J. Wong
dea2221479 [PATCH] aic94xx: handle REQ_DEVICE_RESET
This patch implements a REQ_DEVICE_RESET handler for the aic94xx
driver.  Like the earlier REQ_TASK_ABORT patch, this patch defers the
device reset to the Scsi_Host's workqueue, which has the added benefit
of ensuring that the device reset does not happen at the same time
that the abort tmfs are being processed.  After the phy reset, the
busted drive should go away and be re-detected later, which is indeed
what I've seen on both a x260 and a x206m.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22 11:05:59 -06:00
James Bottomley
d24e1eeb3a [SCSI] scsi_transport_sas: make minimum and maximum linkrate settable quantities
According to SPEC, the minimum_linkrate and maximum_linkrate should be
settable by the user.  This patch introduces a callback that allows the
sas class to pass these settings on to the driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 15:16:44 -05:00
James Bottomley
88edf74610 [SCSI] SAS: consolidate linkspeed definitions
At the moment we have two separate linkspeed enumerations covering
roughly the same values.  This patch consolidates on a single one enum
sas_linkspeed in scsi_transport_sas.h and uses it everywhere in the
aic94xx driver.  Eventually I'll get around to removing the duplicated
fields in asd_sas_phy and sas_phy ...

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 12:41:16 -05:00
James Bottomley
f4ad7b5807 [SCSI] scsi_transport_sas: remove local_attached flag
This flag denotes local attachment of the phy.  There are two problems
with it:

1) It's actually redundant ... you can get the same information simply
by seeing whether a host is the phys parent
2) we condition a lot of phy parameters on it on the false assumption
that we can only control local phys.  I'm wiring up phy resets in the
aic94xx now, and it will be able to reset non-local phys as well.

I fixed 2) by moving the local check into the reset and stats function
of the mptsas, since that seems to be the only HBA that can't
(currently) control non-local phys.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-27 22:30:11 -05:00
James Bottomley
a0e1b6ef3b [SCSI] scsi_transport_sas: add expander backlink
This patch adds the ability to add a backlink to a particular port.  The
idea is to represent properly ports on expanders that are used
specifically for linking to the parent device in the topology.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-12 09:03:20 -04:00
James Bottomley
c9fefeb264 [SCSI] scsi_transport_sas: add unindexed ports
Some SAS HBAs don't want to go to the trouble of tracking port numbers,
so they'd simply like to say "add this port and give it a number".
This is especially beneficial from the hotplug point of view, since
tracking ports and the available number space can be a real pain.

The current implementation uses an incrementing number per expander to
add the port on.  However, since there can never be more ports than
there are phys, a later implementation will try to be more intelligent
about this.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09 09:06:24 -05:00
James Bottomley
65c92b09ac [SCSI] scsi_transport_sas: introduce a sas_port entity
this patch introduces a port object, separates out ports and phys,
with ports becoming the primary objects of the tree.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 12:40:54 -04:00
James Bottomley
2f8600dff2 [SCSI] eliminate rphy allocation in favour of expander/end device allocation
This allows the removal of the contained flag and also does a bit of
class renaming (sas_rphy->sas_device).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-19 10:21:16 -06:00
James Bottomley
79cb1819e2 [SCSI] add preliminary expander support to the sas transport class
This patch makes expanders appear as labelled objects with properties in
the SAS tree.

I've also modified the phy code to make expander phys appear labelled by
host number, expander number and phy index.

So, for my current config, you see something like this in sysfs:

/sys/class/scsi_host/host1/device/phy-1:4/expander-1:0/phy-1-0:12/rphy-1:0-12/target1:0:1

And the expander properties are:

jejb@sparkweed> cd /sys/class/sas_expander/expander-1\:0/
jejb@sparkweed> for f in *; do echo -n $f ": "; cat $f; done
component_id : 29024
component_revision_id : 4
component_vendor_id : VITESSE
device : cat: device: Is a directory
level : 0
product_id : VSC7160 Eval Brd
product_rev : 4
uevent : cat: uevent: Permission denied
vendor_id : VITESSE

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 12:36:19 -06:00
James Bottomley
42ab03609c [PATCH] convert aic94xx over to using the sas transport end device
Begin introducing the concept of sas remote devices that have an rphy
embedded.  The first one (this) is a simple end device.  All that an
end device really does is have port mode page parameters contained.
The next and more complex piece will be expander remote devices.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06 09:43:17 -06:00
James Bottomley
7e6dff62da [SCSI] add 6.0 Gbit phy definitions to the sas transport class
I don't think these exist in silicon yet, but the aic94xx driver has a
register setting for them.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02 22:36:58 -06:00
Christoph Hellwig
a012564136 [SCSI] sas: add support for enclosure and bad ID rphy attributes
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 22:55:13 -06:00
Christoph Hellwig
07ba3a9547 [SCSI] sas: add support for PHY resets
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 19:08:03 -05:00
Christoph Hellwig
ac01bbbd3b [SCSI] sas: add flag for locally attached PHYs
Add a flag to mark a PHY as attached to the HBA as opposed to beeing on
an expander.  This is needed because various features are only supported
on those.  This is a crude hack, the proper fix would be to use
different classes for host-attached vs expander phys.  I'm looking into
that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 19:06:45 -05:00
Christoph Hellwig
c3ee74c4e9 [SCSI] scsi_transport_sas: support link error attributes
For now supporting the ->get_linkerrors method is mandatory.  I'll
probably be beaten to implement the .show_foo variables and different
types of attributes soon..

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 14:57:58 -05:00
Christoph Hellwig
c7ebbbce36 [SCSI] SAS transport class
The SAS transport class contains common code to deal with SAS HBAs, an
aproximated representation of SAS topologies in the driver model,
and various sysfs attributes to expose these topologies and managment
interfaces to userspace.

In addition to the basic SCSI core objects this transport class introduces
two additional intermediate objects:  The SAS PHY as represented by struct
sas_phy defines an "outgoing" PHY on a SAS HBA or Expander, and the SAS
remote PHY represented by struct sas_rphy defines an "incoming" PHY on a
SAS Expander or end device.  Note that this is purely a software concept, the
underlying hardware for a PHY and a remote PHY is the exactly the same.

There is no concept of a SAS port in this code, users can see what PHYs
form a wide port based on the port_identifier attribute, which is the same
for all PHYs in a port.

This submission doesn't handle hot-plug addition or removal of SAS devices
and thus doesn't do scanning in a workqueue yet, that will be added in
phase2 after this submission.  In a third phase I will add additional
managment infrastructure.

I think this submission is ready for 2.6.14, but additional comments are
of course very welcome.

I'd like to thanks James Smart a lot for his very useful input on the
design.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-09 16:43:37 -05:00