Commit graph

1004 commits

Author SHA1 Message Date
Kevin Hilman
823588c186 [ARM] 3537/1: Rework DMA-bounce locking for finer granularity
Patch from Kevin Hilman

This time with IRQ versions of locks.

Rework also enables compatability with realtime-preemption patch.
With the current locking via interrupt disabling, under RT,
potentially sleeping functions can be called with interrupts
disabled.

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 22:27:14 +01:00
Pavel Pisa
fa3e686a34 [ARM] 3601/1: i.MX/MX1 DMA error handling for signaled channels only
Patch from Pavel Pisa

There has been bug, that dma_err_handler() touches even
channels not signaling error condition.

Problem noticed by Andrea Paterniani.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 22:21:03 +01:00
Rod Whitby
e22b04fb6b [ARM] 3597/1: ixp4xx/nslu2: Board support for new LED subsystem
Patch from Rod Whitby

This patch implements NEW_LEDS support for the Linksys NSLU2.  The
NSLU2 has four LED indicators, which are the only form of output for
an unmodified device - there is no keyboard or display on an NSLU2.
For an NSLU2 which has been modified to bring out the serial port
console, it is important to register that device first separately, to
enable debugging of other device support.

Signed-off-by: John Bowler <jbowler@acm.org>
Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 22:21:02 +01:00
Rod Whitby
df6934b33c [ARM] 3595/1: ixp4xx/nas100d: Board support for new LED subsystem
Patch from Rod Whitby

This patch implements NEW_LEDS support for the IOMega NAS100d.  The
NAS100d has three LED indicators, which are the only form of output
for an unmodified device - there is no keyboard or display on an
NAS100d.  For an NAS100d which has been modified to bring out the
serial port console, it is important to register that device first
separately, to enable debugging of other device support.

Signed-off-by: John Bowler <jbowler@acm.org>
Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 22:21:01 +01:00
Nicolas Pitre
f606a6ff22 [ARM] 3626/1: ARM EABI: fix syscall restarting
Patch from Nicolas Pitre

The RESTARTBLOCK case currently store some code on the stack to invoke
sys_restart_syscall.  However this is ABI dependent and there is a
mismatch with the way __NR_restart_syscall gets defined when the kernel
is compiled for EABI.

There is also a long standing bug in the thumb case since with OABI the
__NR_restart_syscall value includes __NR_SYSCALL_BASE which should not
be the case for Thumb syscalls.

Credits to Yauheni Kaliuta <yauheni.kaliuta@gmail.com> for finding the
EABI bug.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 22:18:45 +01:00
Ben Dooks
92b7eb8ffc [ARM] 3628/1: S3C24XX: add get_rate call to struct clk
Patch from Ben Dooks

Add a get_rate call to allow an given clock
to over-ride the clk_get_rate() call.

This provides support for clocks which rely on
division of their parent to correctly report
their frequency when the parent can also change.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 22:18:21 +01:00
Ben Dooks
99c13853ff [ARM] 3627/1: S3C24XX: split s3c2410 clocks from core clocks
Patch from Ben Dooks

Split the s3c2410 specific clocks from the core
clock code, as part of the work to support more
of the Samsung line of SoCs.

The patch does not use the sysdev mechanism as
the clocks are needed for the timer init, which
is very early in the kernel init sequence.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 22:18:20 +01:00
Ben Dooks
a341305e94 [ARM] 3613/1: S3C2410: Add sysdev and sysclass
Patch from Ben Dooks

The S3C2440 and S3C2442 both have their own sysdev
and sysclass for differentiating them from the
currently default S3C2410.

Add a sysdev for the S3C2410 as part of the work
to make the code be non-dependant on the S3C2410.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 22:18:13 +01:00
Lennert Buytenhek
8b76a68c6c [ARM] 3620/2: ixp23xx: add uengine loader support
Patch from Lennert Buytenhek

This patch allows the ixp2000 uengine loader that is already in the
tree to also be used on the ixp23xx.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:30:56 +01:00
Lennert Buytenhek
744da2cb59 [ARM] 3618/1: add defconfig for logicpd pxa270 card engine
Patch from Lennert Buytenhek

As it's slightly nontrivial to make it possible to build a single
kernel image for both the mainstone and the logicpd pxa270 card engine,
add a separate defconfig for the logicpd pxa270 card engine for now.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:30:55 +01:00
Lennert Buytenhek
a059e33ce6 [ARM] 3617/1: ep93xx: fix slightly incorrect timer tick rate
Patch from Lennert Buytenhek

The tick rate of timers 1-3 isn't exactly 508 kHz as some parts of the
relevant documentation claim, but more like 508.469 kHz (14.7456 MHz
divided by 29.)

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:30:54 +01:00
Lennert Buytenhek
f869afab8f [ARM] 3616/1: fix timer handler wrap logic for a number of platforms
Patch from Lennert Buytenhek

A couple of platforms aren't using the right comparison type in their
timer interrupt handlers (as we're comparing two wrapping timestamps,
we need a bmi/bpl-type comparison, not an unsigned comparison) -- this
patch fixes them up.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:30:53 +01:00
Lennert Buytenhek
84b61f6d3a [ARM] 3615/1: ixp23xx: use platform devices for physmap flash
Patch from Lennert Buytenhek

Now that the physmap platform device rewrite is in, make the ixp23xx
boards use platform devices for physmap flash.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:30:52 +01:00
Lennert Buytenhek
0967b5f079 [ARM] 3614/1: ep93xx: use platform devices for physmap flash
Patch from Lennert Buytenhek

Now that the physmap platform device rewrite is in, make the ep93xx
boards use platform devices for physmap flash.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:30:51 +01:00
Vitaly Wool
b741483d7d [ARM] 3623/1: pnx4008: move GPIO-related defines to gpio.h
Patch from Vitaly Wool

This patch moves GPIO-related defines and static inline funcs from include/asm-arm/arch-pnx4008/pm.h to include/asm-arm/arch-pnx4008/gpio.h.
Also, some more GPIO-related defines are added to include/asm-arm/arch-pnx4008/gpio.h as they are needed for the USB host driver (coming soon...)

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:26:21 +01:00
Vitaly Wool
e9931b5da6 [ARM] 3622/1: pnx4008: remove clk_use/clk_unuse
Patch from Vitaly Wool

clk_use/clk_unuse functions are no longer needed, so removing those from arch/arm/mach-pnx4008/clock.c.
Also, the order of functions is rearranged a bit, to avoid forward declarations.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:26:20 +01:00
Russell King
1a6be26d5b [ARM] Enable VFP to be built when non-VFP capable CPUs are selected
Since we pass flags to the compiler to control code generation based
on the least capable selected CPU, if we want to include VFP support,
we must tweak the assembler flags to allow the VFP instructions.
Moreover, we must not use the mrrc/mcrr versions since these will not
be recognised by the assembler.

We do not convert all instructions to the VFP-equivalent (yet) since
binutils appears to barf on "fmrx rn, fpinst" and doesn't provide any
other way (other than using the mrc equivalent) to encode this
instruction - which is rather a problem when you have a VFP
implementation which requires these instructions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:24:24 +01:00
Russell King
d6551e884c [ARM] Add thread_notify infrastructure
Some machine classes need to allow VFP support to be built into the
kernel, but still allow the kernel to run even though VFP isn't
present.  Unfortunately, the kernel hard-codes VFP instructions
into the thread switch, which prevents this being run-time selectable.

Solve this by introducing a notifier which things such as VFP can
hook into to be informed of events which affect the VFP subsystem
(eg, creation and destruction of threads, switches between threads.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:24:18 +01:00
Russell King
905f14672e [ARM] Fix tosa build error
tosa.c references mdelay(), but was missing linux/delay.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 23:27:37 +01:00
Deepak Saxena
4af6fee188 [ARM] 3610/1: Make reboot work on Versatile
Patch from Deepak Saxena

This patch makes soft reboot work on the Versatile board. Thanks to
Catalin Marinas @ ARM for pointing out the proper way to do this.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 21:30:44 +01:00
Russell King
098a4cb7c0 Merge S3Cxxxx branch 2006-06-20 20:57:34 +01:00
Russell King
ea75ee9ab8 [ARM] Include asm/hardware.h not asm/arch/hardware.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:53:16 +01:00
Russell King
3a8182bd88 Merge Zaurus branch 2006-06-20 19:49:07 +01:00
Russell King
695a9d236a Merge AT91 branch 2006-06-20 19:48:18 +01:00
Andrew Victor
55c20c0af7 [ARM] 3599/1: AT91RM9200 remove global variables
Patch from Andrew Victor

This patch removes some now unnecessary global variables -
at91_master_clock, at91_serial_map, at91_console_port.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:31:39 +01:00
Ben Dooks
ec57b709c3 [ARM] 3609/1: S3C24XX: defconfig update for s3c2410_defconfig
Patch from Ben Dooks

Update s3c2410_defconfig to latest kernel with the
latest patches

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:31:06 +01:00
Andrew Victor
5c3fddced9 [ARM] 3607/1: AT91RM9200 misc fixes
Patch from Andrew Victor

This final patch includes some general fixes.

1. Link in pm.o if CONFIG_PM is enabled.  [Should have been included in
patch 3605/1].
2. Use __raw_readl()/__raw_writel() when accessing System Peripheral
registers.
3. Removed some unnecessary includes

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:30:20 +01:00
Andrew Victor
907d6deb62 [ARM] 3605/1: AT91RM9200 Power Management
Patch from Andrew Victor

This patch adds the core Power Management support for the AT91RM9200
processor.  It will support suspend-to-RAM and standby modes.

The suspend-to-RAM functionality is not 100% complete.  The code that
needs to be execute from the internal SRAM to restore the system is
outstanding.  For now we just fall through to Standby mode.

The AT91-specific at91_suspend_entering_slow_clock() function will
eventually be replaced by clk_must_disable() once that functionality is
added to mainline clock API.

Patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:30:19 +01:00
Andrew Victor
6902f523a3 [ARM] 3604/1: AT91RM9200 New boards
Patch from Andrew Victor

This patch adds support for an additional 4 AT91RM9200-based boards:

1. Conitec ARM&EVA  [MACH_CARMEVA]
   (http://www.conitec.net/english/linuxboard.htm)

2. KwikByte KB920x  [MACH_KB9200]
   (http://kwikbyte.com/KB9202_description_new.htm)

3. Embest ATEB9200  [MACH_ATEB9200]
   (http://www.embedinfo.com/english/product/ATEB9200.asp)

4. Sperry-Sun KAFA board  [MACH_KAFA]
   (unknown)

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:30:18 +01:00
Richard Purdie
faed568413 [ARM] 3594/1: Poodle: Add touchscreen support + other updates
Patch from Richard Purdie

Poodle Updates:
* Update corgi_ssp to make the GPIO chip selects optional
* Enable corgi_ssp for use by poodle
* Add corgi touchscreen platform device for poodle
* Export locomo platform device.
* Set framebuffer device parent correctly

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 20:46:05 +01:00
Richard Purdie
f8703dc8cb [ARM] 3564/1: sharpsl_pm: Abstract some machine specific parameters
Patch from Richard Purdie

Abstract some machine specific parameters from the sharpsl_pm core
into the machine specific drivers. This allows the core to support
tosa/poodle.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 19:58:52 +01:00
Richard Purdie
88660351cb [ARM] 3561/1: Poodle: Correct the MMC/SD power control
Patch from Richard Purdie

Correct the Poodle power control for the MMC/SD port. Also
add write protection switch support.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 19:58:51 +01:00
Richard Purdie
74617fb6b8 [ARM] 3593/1: Add reboot and shutdown handlers for Zaurus handhelds
Patch from Richard Purdie

Add functionality to allow machine specific reboot handlers on ARM.
Add machine specific reboot and poweroff handlers for all PXA Zaurus
models.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 19:57:12 +01:00
Ben Dooks
bf1c56a3aa [ARM] 3591/1: Anubis: IDE device definitions
Patch from Ben Dooks

Platform device definitions for the two IDE ports
on the Simtec Anubis board.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 18:30:04 +01:00
Andrew Victor
067bbada4c [ARM] 3589/1: AT91RM9200 DK/EK board update
Patch from Andrew Victor

This patch updates the support for the Atmel DK and EK boards.

The changes include:
1. Use the new at91_uart_config structure and device registration
functions for the UARTs.
2. Registration of I2C and SPI platform devices.
3. The USB Device pullup line is connected to reset, so multidrive needs
to be enabled on the line.  [Patch from David Brownell].

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 18:16:45 +01:00
Andrew Victor
466e6227e6 [ARM] 3588/1: AT91RM9200 CSB337/637 board update
Patch from Andrew Victor

This patch updates the support for the Cogent CSB337 and CSB637 boards.

The changes include:
1. Use the new at91_uart_config structure and device registration
functions for the UARTs.
2. Registration of I2C and SPI platform devices.
3. The CSB337 board uses PB0 & PB1 (and not PB2) for the LEDs.  [Patch
from David Brownell]

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 17:26:23 +01:00
Andrew Victor
2e83640270 [ARM] 3585/1: AT91RM9200 Platform devices
Patch from Andrew Victor

This patch updates the platform device support for the AT91RM9200.

The changes include:

1. USB Host device renamed to "at91_ohci" since the driver is also
usable on the AT91SAM9261 processor.
2. Enabling multidrive on the USB Device's pullup pin should not be done
for all boards.  Moved into board-specific files.  [Patch from David
Brownell]
3. Move enabling of PCMCIA/Compact Flash pins out of the driver.
4. Added SPI device and resources.
5. Added Watchdog device and resources.  [Patch from David Brownell]
6. Added UART device and resources.
7. The simple devices (watchdog, rtc, i2c) are now automatically
registered and don't have to be registered separately in each
board-specific file. [Patch from David Brownell]

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 16:31:55 +01:00
Sascha Hauer
5e64238717 [ARM] 3577/1: netX: Default config for netx based boards
Patch from Sascha Hauer

This patch adds the default config file for netx based boards.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:30:21 +01:00
Sascha Hauer
2697c5e1f7 [ARM] 3576/1: netX: board support for NXEB500HMI development board
Patch from Sascha Hauer

This patch adds the board specific code for the Hilscher NXEB500HMI
development board.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:29:45 +01:00
Sascha Hauer
af614ba072 [ARM] 3575/1: netX: board support for NXDB500 development board
Patch from Sascha Hauer

This patch adds the board specific code for the Hilscher NXDB500
development board.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:29:44 +01:00
Sascha Hauer
693532dcff [ARM] 3574/1: netX: board support for NXDKN development board
Patch from Sascha Hauer

This patch adds the board specific code for the Hilscher NXDKN
development board.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:29:43 +01:00
Sascha Hauer
8e77da68a6 [ARM] 3569/2: netX: driver for XMAC/XPEC engines
Patch from Sascha Hauer

The netX processors have generic network bitstream engines (XMAC/XPEC).
This driver adds support for firmware loading and start, stop, reset
commands.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:28:20 +01:00
Sascha Hauer
ef70cd4d24 [ARM] 3568/2: netX: pointer fifo driver
Patch from Sascha Hauer

This patch adds support for the pointer FIFOs on netX.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:28:19 +01:00
Sascha Hauer
bb6d8c8828 [ARM] 3567/2: arm: base support for Hilscher netX
Patch from Sascha Hauer

This patch adds the base support for Hilscher's netX network
processors.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:27:53 +01:00
Andrew Victor
814138ffa4 [ARM] 3584/1: AT91RM9200 GPIO suspend/resume support
Patch from Andrew Victor

This patch adds suspend/resume/set_wake support for the AT91RM9200's
GPIO interrupts.

Original patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:26:54 +01:00
Andrew Victor
683c66bf75 [ARM] 3583/1: AT91RM9200 IRQ suspend/resume support
Patch from Andrew Victor

Added suspend/resume/set_wake support for the AT91RM9200's AIC interrupt
controller.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:26:53 +01:00
Andrew Victor
37f2e4bc12 [ARM] 3582/1: AT91RM9200 IRQ trigger types
Patch from Andrew Victor

The AIC interrupt controller's set_irq_type() can also be used for
internal interrupts.  IRQT_LOW and IRQT_FALLING are the only options not
supported for the internal interrupts.

[Original patch from Karl Olsen]

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:26:52 +01:00
Andrew Victor
10e8e1fb75 [ARM] 3581/1: AT91RM9200 Internal SRAM
Patch from Andrew Victor

This patch maps the AT91RM9200's internal SRAM into the virtual memory
address space - just below the internal peripheral registers.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:26:51 +01:00
Andrew Victor
2a6f9902c6 [ARM] 3580/1: AT91RM9200 Timer suspend/resume support
Patch from Andrew Victor

Added suspend/resume support for the AT91RM9200 timer.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:26:50 +01:00
Andrew Victor
963151f247 [ARM] 3579/1: AT91RM9200 Timer simplification
Patch from Andrew Victor

Use a global variable 'last_crtr' to store the time of the last timer
tick instead of the ST_RTAR register.
It's faster, frees up the ST_RTAR register for other uses, and hopefully
makes the code more understandable.  [Patch from Peter Menzebach]

Also add the SA_TIMER flag to Timer IRQ.  (It seems to be required for
the realtime preempt patch).

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:23:41 +01:00