Commit graph

47 commits

Author SHA1 Message Date
James Bottomley
b2d8bfe185 [SCSI] aic7xxx: expose the bus setting to sysfs
Read the transciever register and display in the host transport
properties.  I'm still not entirely sure what this does for multiple
transciever adapters (like some 160 ones) however, I suspect it
displays the transciever state of the switchable bus segment.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 10:49:07 -05:00
Tobias Klauser
6391a11375 [SCSI] drivers/scsi: Use ARRAY_SIZE macro
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove
duplicates of the macro.

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 10:45:30 -05:00
Christoph Hellwig
8cac814501 [SCSI] aic7xxx: semaphore to completion conversion
On Tue, Jan 31, 2006 at 06:20:18PM +0100, Christoph Hellwig wrote:
> switch eh_sem to a completion.  due to wait_for_completion_timeout this
> also nicely simplifies the code.  Unfortunately it's untested, so if
> someone with the hardware could give it a try that would be nice.  Once
> it works the same thing can be applied to aic79xx.

New version that switches to the common onstack completion and just a
pointer in the platform_data struct idiom.  This gets rid of all the
flags fiddling.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 23:08:37 -06:00
James Bottomley
dacee84b07 [SCSI] aic7xxx: fix timer handling bug
The driver is doing a rather stupid mod_timer allegedly to "give
request sense more time to complete".  This is illegal and pointless,
so just eliminate it.  Also eliminate all the other uses of struct
timer_list in the driver, which are mostly bogus.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-12 11:49:07 -06:00
Jesper Juhl
9e1fe9314c [SCSI] handle scsi_add_host failure for aic7xxx and fix compiler warning
Add scsi_add_host() failure handling for aic7xxx
Also silence a compiler warning :
 drivers/scsi/aic7xxx/aic7xxx_osm.c: In function `ahc_linux_register_host':
 drivers/scsi/aic7xxx/aic7xxx_osm.c:1100: warning: ignoring return value of `scsi_add_host', declared with attribute warn_unused_result

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-14 18:52:45 -08:00
Vasily Averin
dce200670d [SCSI] aic7xxx: reset handler selects a wrong command
To transport scsi reset command to device aic7xxx reset handler looks
at the driver's pending_list and searches any proper command. However
the search condition has been inverted: ahc_match_scb() returns TRUE
if a matched command is found. As a result the reset on required
devices did not turn out well, a correctly working neighbour device
may be surprised by the reset. aic7xxx reset handler reports about the
success, but really the original situation is not corrected yet.

Signed-off-by: Vasily Averin <vvs@sw.ru>

Naturally, there's a corresponding problem in the aic79xx driver, so
I've also added the same fix for that.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-28 12:28:26 -06:00
Christoph Hellwig
6d5e9fd196 [SCSI] aic7xxx: remove scsi_assign_lock usage
just take the internal lock in queuecommand instead.  also switch
the only direct use of the internal lock to the wrappers used elsewhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 12:51:58 -06:00
Jeff Garzik
422c0d61d5 [SCSI] use scmd_id(), scmd_channel() throughout code
Wrap a highly common idiom.  Makes the code easier to read, helps pave
the way for sdev->{id,channel} removal, and adds a token that can easily
by grepped-for in the future.

There are a couple sdev_id() and scmd_printk() updates thrown in as well.

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 21:10:16 -05:00
Jeff Garzik
017560fca4 [SCSI] use sfoo_printk() in drivers
Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 21:04:15 -05:00
James Bottomley
97af50f60f [SCSI] aic7xxx/aic79xx: fix module removal path not to panic
In these drivers, scsi_remove_host() is called too late, at the point
it is called, the driver has already shut down too far to accept any
I/O that the shutdown might generate.  Any generated I/O actually
triggers a panic.

Fix this by calling scsi_remove_host() as early as possible and not
calling scsi_host_put() until just before we kfree the ahc_softc.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-02 15:32:25 -05:00
James Bottomley
a89f29f6ea [SCSI] aic7xxx: move to dma_get_required_mask() and correct 39 bit assumptions
This patch moves aic7xxx over to the dma_get_required_mask() API and
dumps its open coded memory check.

It also appears from this bug:

https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=167049

That 39 bit addressing doesn't work on older cards.  I surmise that the
AHC_LARGE_SCBS flag is the one that marks cards capable of using 39 bit
addressing, so I also folded that check into the code.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-13 14:24:48 -05:00
James Bottomley
17fa53da12 Merge by hand (conflicts in sd.c) 2005-09-06 17:52:54 -05:00
Christoph Hellwig
1ff927306e [SCSI] aic7xxx: remove aiclib.c
#include of C files and macro tricks to rename symbols are evil and just
cause trouble.  Let's doublicate the two functions as they're going to
go away soon enough anyway.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:46:07 -05:00
James Bottomley
7a93aef7fb Merge HEAD from ../scsi-misc-2.6-tmp 2005-08-28 11:18:35 -05:00
James Bottomley
a80b3424d9 [SCSI] aic79xx: fix boot panic with no hardware
There's a spurious (and illegal since it's marked __exit) call to
ahc_linux_exit() in ahc_linux_init() which causes a double list
deletion of the transport class; remove it.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-09 12:19:25 -05:00
James Bottomley
fc789a9399 [SCSI] aic7xxx/79xx: fix another potential panic due to a non existent target
I ran into this one sending bus resets across the hardware.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-05 16:49:15 -05:00
James Bottomley
79778a27be [SCSI] aic7xxx: upport all sequencer and core fixes from adaptec version 6.3.9
This patch upports all relevant code fixes and bumps the driver version
to 7.0 to signify starting a new tree.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-04 17:41:25 -05:00
James Bottomley
fdd0edf2ac [SCSI] fix aic7xxx performance issues since 2.6.12-rc2
Several people noticed we dropped quite a bit on benchmark figures.
OK, it was my fault but unfortunately I discovered I ran out of brown
paper bags a while ago and forgot to reorder them.

The issue is that a construct introduced in the conversion of the
driver to use the transport class keyed off whether the block request
was tagged or not.  However, the aic7xxx driver doesn't properly set
up the block layer TCQ (it uses the wrong API), so the driver now
things all requests are untagged and we keep it to a queue depth of a
single element.  Oops.

The fix is to use the correct TCQ API.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-04 13:38:59 -05:00
James Bottomley
84e66ee7ec [SCSI] aic7xxx: final fixes for DT handling
The aic7xxx can support Data Group transfers at periods > 12.5, so
eliminate that restriction.  Additionally wide is a requirement for DT
so ensure wide is set if users request DT.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-02 10:50:51 -05:00
James Bottomley
f7ff898ad3 [SCSI] aic7xxx: fix bug in DT handing
Basically DT isn't reported or handled at all.  The problem is that
lines of code like this:

spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ;

don't do what you think they do when spi_dt is a single bit variable.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30 10:44:38 -05:00
Christoph Hellwig
2a40342e0e [SCSI] aic7xxx: remove ahc_tailq
now that we do normal PCI probing there's no need to keep a list of
all HBAs.

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11 12:47:47 -05:00
Christoph Hellwig
dfd287f6ee [SCSI] aic7xxx: sane pci probing
always probe in bus order, avoid any reordering

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11 12:43:09 -05:00
James Bottomley
ace4e7185d [SCSI] aic7xxx: fix boot hang with Fujitsu drives
Apparently these are the only drives that try to negotiate IU and QAS
at u160 speeds.  The aic7xxx driver can't cope with this.  The fix is
to eliminate the IU and QAS setting routines.  I've #if 0'd them out,
just in case we ever get the sequencer documentation out of Adaptec,
since we'd then be able to fix the driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-03 10:44:21 -05:00
Jeff Garzik
68b3aa7c98 [SCSI] allow sleeping in ->eh_bus_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:10 -05:00
Jeff Garzik
8fa728a268 [SCSI] allow sleeping in ->eh_abort_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:04:55 -05:00
James Bottomley
12021fff2b [SCSI] aic7xxx: fix the BIOS limits setting routines
Following the go around over the SONY DVD that needs artificial limits,
this should be the correct code for all cases (minus the debugging
prints).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-13 21:37:27 -05:00
Christoph Hellwig
d6cbbad729 [SCSI] aic7xxx: clean up eisa support
- the eisa layer only probes when it's actually safe, no need for
   a driver option
 - store the id table directly in linux format instead of convering
   at runtime

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11 18:45:06 -05:00
Christoph Hellwig
8eb3794257 [SCSI] aic7xxx: remove some dead wood
especially the now dead scsi_cmnd overlay

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11 18:44:12 -05:00
James Bottomley
597487b9ba [SCSI] fix aic7xxx coupled parameter problem
For setting coupled parameters, we need to be comparing against the goal
settings, not the current ones.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-03 12:38:39 -05:00
James Bottomley
b1abb4d67f [SCSI] aic7xxx: remove separate target and device allocations
Since the aic driver is now taught to speak in terms of the generic
linux devices, we can now also dispense with the transport class get
routines (since we update the parameters when the driver sees they
change) and also plumb it into the spi transport transfer agreement
reporting infrastructure.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26 14:28:31 -04:00
Andrew Morton
d981289627 [PATCH] aic7xxx_osm build fix
Fix a c99ism.

Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-24 20:08:14 -07:00
James Bottomley
2bf2c568c8 [SCSI] aic7xxx: fix U160 mode
The new period/dt setting routines don't get the coupling of these
parameters correct.  This means that Domain Validation never gets DT
set, and thus the drive gets restricted to U80.

Fix this by restoring the couplings in the set routines.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 16:43:51 -05:00
James Bottomley
fb3089dfb5 [SCSI] aic7xxx: add back locking
Tampering with the settings has to be done under the host lock ...
slave_alloc isn't called under any lock, so this has to be done
explicitly.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:43 -05:00
James Bottomley
c7525233d2 [SCSI] aic7xxx: make correct use of slave_alloc/destroy and remove the per device timer
The allocation of all of our components should be done in slave alloc.
Currently it's rather fancifully refcounted in the queuecommand
callback.  This patch moves allocation and destroy to their correct
places in slave_alloc/slave_destory.  Now we can guarantee that
everywhere a device is requested, it's actually been allocated, so don't
check for this anymore.

Additionally, the per device busy timer was the only source of potential
use after free.  It's been deleted because Linux does the correct thing
with busy returns, so there's no need to implement a separate timer in
the driver.

Finally, implement code that forces all the device parameters to zero
(i.e. async and narrow) in the slave alloc, inform the spi class of the
bios recorded maximums and wait until slave configure before trying
anything more adventurous.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:42 -05:00
James Bottomley
8e45ebcc66 [SCSI] aic7xxx: remove the completeq
This should finish the spurious queue removal from aic7xxx (there are
other queues that are probably unnecessary, but at least the major and
obviously unnecessary ones are done with).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:40 -05:00
James Bottomley
38c29ce06d [SCSI] aic7xxx: remove the last vestiges of the runq
This was rendered obsolete by the busyq removal; remove some of the last
remnants of its presence.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:39 -05:00
Christoph Hellwig
013791ee01 [SCSI] aic7xxx: remove usage of obsolete typedefs
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:38 -05:00
Christoph Hellwig
7dfa0f2673 [SCSI] remove dma_mask hacks
pci_alloc_consistent is under 4G by default.  Also simplify the
definition of bus_dmamap_t.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:37 -05:00
Christoph Hellwig
dedd831081 [SCSI] aic7xxx: remove Linux 2.4 ifdefs
There's not much sense in sharing code anymore now that aic7xxx uses
various transport class facilities.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:36 -05:00
James Bottomley
e4e360c325 [SCSI] remove aic7xxx busyq
The aic7xxx driver has two spurious queues in it's linux glue code: the
busyq which queues incoming commands to the driver and the completeq
which queues finished commands before sending them back to the mid-layer

This patch just removes the busyq and makes the aic finally return the
correct status to get the mid-layer to manage its queueing, so a command
is either committed to the sequencer or returned to the midlayer for
requeue.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:34 -05:00
James Bottomley
fad01ef88d [SCSI] correct aic7xxx period setting routines
This is similar to the previous sym2 problem.  For Domain Validation to
work we can't allow any period setting to turn wide on if it was
previously off.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:33 -05:00
Christoph Hellwig
0bdcd78ea2 [SCSI] aic7xxx: remove inquiry sniffing leftovers
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-21 16:13:39 -04:00
James Bottomley
858eaca169 [PATCH] Fix aic7xxx_osm.c compile with older gcc's
My version of gcc doesn't warn about this error (declaration in the
middle of a set of statements).

The fix is simple (this also corrects return code; for init functions it
should be zero or error).
2005-04-21 07:35:45 -07:00
cb624029ca aic7xxx: convert to SPI transport class Domain Validation
Now that we export all the parameters, this is easy to do.
It also means that we can dump about 2000 lines of code that
were dedicated to doing this internally.

Additionally, this removes all the aic7xxx driver abuse
of SCSI timers which were embedded in the DV routines.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 13:52:27 -05:00
92d161c373 aic7xxx: add support for the SPI transport class
This is just a simplistic patch to export all of the
aic7xxx internal transport parameters via the SPI
transport class.  It doesn't actually alter the way the
driver works at all.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 13:52:02 -05:00
be7db055dd [PATCH] remove old scsi data direction macros
these have been wrappers for the generic dma direction bits since 2.5.x.
This patch converts the few remaining drivers and removes the macros.

Arjan noticed there's some hunk in here that shouldn't.  Updated patch
below:

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 13:49:58 -05:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00